ERSB2020

2019/2020

PRODUCT +603 5519 5519
CATALOGUE [email protected]

www.ersbcom.com

SPLICER | OPTICAL SYSTEM

2

SPLICER | OPTICAL SYSTEM

3

SPLICER | OPTICAL SYSTEM

4

SPLICER | OPTICAL SYSTEM

5

SPLICER | OPTICAL SYSTEM

Signal Fire AI-9 is the latest model from the line of optical fiber splicers, which have been successfully
used in fiber optic installations of various categories for several years. Thanks to the fine-tuning of the
software and an even better optimization of the splicing process, the entire process has been shortened to
just 5 seconds. However, the most important feature of the new model is built in optical power me-
ter module and visual fault locator . This allows for quick diagnostics of the optical path immediate-
ly after making a splice.

• Signal Fire AI-9 fusion splicer
• toolbox
• set of spare electrodes
• fiber cleaver
• universal stripper
• stripper for flat cables
• bottle with dispenser
• cleaning brush
• carrying belts (for the splicer and the box)

AC charger with USB adapter
Key features

• 6 motors for fiber positioning,
• core alignment or cladding alignment options,
• AUTO mode option,
• x300 magnification factor,
• quad-core processor providing fast response times,
• splicing time from 5 seconds,
• quick sleeve heating period (15 s for 40 mm sleeve),
• configuration with dedicated smartphone app (Android/iOS),
• the app can create operation reports (export to xls),
• large (5.1'') display with adjustable brightness,
• metal casing underneath covered with rubber layer,
• high-capacity exchangeable battery (7800 mAh, ca. 200 splicing and heating operations),
• battery charging time: ca 3.5 h,
• USB adapter for smartphone charging,
• universal fiber holders,
• high quality practical toolbox,
• large set of accessories.

6

SPLICER | OPTICAL SYSTEM

ST3100G Handheld FTTx Splicer

Model ST3100

Appicable Fibers SM(ITU-T G. 652&G.657),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T
G655)

Compatible Fiber/Cable0.25-3.0mm/lndoor Cable

Cleaved Length Coating Diameter: 0.125-1 mm/Cleave length:8-16mm

Splicing Mode Preset 41 splicing modes, storable 100 modes
Typical Splice Loss SM: 0.03dB/MM: 0.02dB/DS: 0.05dB/NZDS: 0.05dB/G657: 0.03dB (ITU-T
Return Loss Standard)
>60db

Lighting 2 powerful white LEDs

Splicing Time SM fast mode: 6s

Estimated Splice Loss yes
Protection Sleeve 20-60mm
Length Preset 5 kinds of thermal heating tube: 20/30/40/50/60mm, Max 100 modes
Heating tank

Heating Time Fast heating time: 13s, Typical Heating Time: 30s

Results Storage 20000 latest records & 200 images

Tension Test 1.5-2.0N

Display 3.5" high resolution display with touch screen
Fiber View & Magnifi- X,Y,XY,X/Y:380xMagnification
cation AC Input 100-240V,DC Input 12-15V
Power Supply

Battery capacity 2200mAh battery capacity

Heating times typical above 120 times(splicing+heating)

Operating Methods Button/Touch Screen

Automatic Calibration Automatic ARC calibration by air pressure and temperature

Electrode Life 5000 ARCS

Terminal USB 2.0

Weight 1.15 KG (including rubber Bumper)

Dimension 132W*205L*98Hmm (including rubber Bumper)
Operating Condition Operating altitude 0-5000m above sea level, 0-95% relative humiditym-10~50°C,
Storage Condition max wind 15m/s
0—95% relative humidity, -40~80°C; battery storage: -20~30°C

7

TEST EQUIPMENT | OPTICAL SYSTEM

NEW! AE2200 FTTx Multi-Function Meter

The award-winning AE2200 is the company’s newest ultra-portable, multi-function validation solution
for FTTx, RFoG and RF PON installations. Engineered to address the requirements of communications
service providers (CSP), the AE2200 is flexible meter that integrates cable TV analysis, metallic TDR
testing and optical testing, including a fiberscope, optical time domain reflectrometer (OTDR), optical
power meter, visual fault locator and light source. Users can easily verify optical links with the FiberPath
fiberlink mapping tool, which reduce the need for OTDR trace interpretation. The AE2200 confirms

Key Benefits:

• Future-proof, all-in-one solution includes optical, cable TV (RF), and metallic testing for verifying the
installation of FTTx, RFoG and RF PON networks
• Lightweight and compact design for easy mobility throughout the network
• Long battery life enables the user to test all day without stopping to charge the test equipment
• Easy learning curve with simple GUI
• FiberPath™ and Auto Test simplifies testing and reduces the need for OTDR trace interpretation
• Validate proper levels for both optical and cable TV installation, minimizing repair truck rolls and
increasing customer satisfaction

Key Features:

• OTDR performance specifications with up to 3 wavelengths, perfect for FTTx, RFoG and RF PON in-
stallation
• FiberPath™ and Autotest: FiberPath™ analyzes the OTDR traces to clearly display the map of the fiber
link and identifies possible faults, reducing the need for OTDR trace interpretation
• Digital QAM and analog measurements and constellation display for Cable TV installation verification
• Combines optical and metallic tests: OTDR, VFL, OPM, LS, Cable TV (RF) Test, TDR, and Fiberscope
• Fiberscope integration with FiberSpot software for identifying dirty spots of fiber connectors

8

TEST EQUIPMENT | VIDEO INSPECTOR

HW-400FVM FIBRE OPTIC VIDEO INSPECTION PROBE

Description: Features:

HW-400FVM consists of 2.5inch video display and HW- 1. 400× Magnification Ability，less more 1um
400MP probe with one-way focus control, small and 2.
portable set let the operation easier anywhere anytime, Resolution.
tailoring for network maintenance perfectly.- Bright and Contrast Adjustment for
indoors/outdoors operation.
HW-400FVM probe is of high performance fibre end face 3. 2.5 Inch Monitor support in Video record/
inspection probe. Compared with traditional tools, its Voice editing/Image Capture/Zoom out &in
unique single-way of focus control greatly simplifies the 4. function/File Generated & Stored/Grid
work. No matter left or right hand, forward or backward 5. Judgment
operation, it can quickly get the end ace inspected and 6. 27 assorted of tips available to have both PC
displayed clearly. 2.5inch display has video record/voice and APC end face inspection.
editing/image capture/zoom/grid judgment/storage etc., 60°angle tips to test multiple types of
assorted function. It can also easily access to PC or laptop connectors in many hard-to-access places or
through SD card equipped with. Thereby small display can bottom of patch panel.
be taken and recorded anywhere with ease. 60°angle tips to test multiple types of
connectors in many hard-to-access places or
2.5inch display has video record/voice editing/image 7. bottom of patch panel.
capture/zoom/grid judgment/storage etc., assorted SD card inside the monitor can be easily
function. It can also easily access to PC or laptop through access to PC or laptop. Optional Software
SD card equipped with. Thereby small display can be high-definition fibre end face image to end
taken and recorded anywhere with ease. user

Overall, HW-400FVM microscope is smart, quick and
convenient for both in-doors and out-doors operation,

displaying- Single way - 400× Magnification Ability，less

more 1um Resolution. to have focus control, stir the wheel
with fingers simply to have loop control with back or
forward movement.

9

TEST EQUIPMENT | LASER SOURCE

TCOM FHS2 SERIES OPTICAL LASER SOURCES

Description:

T’COM FHS2 Series Optical Laser Source is an advanced version of
Laser Sources, with better features and more functions.

Auto-wavelength Recognition:

T’COM Series Optical Laser Source transmits with a wavelength-
identification digital encrypted protocol, enabling T’COM FHP2 Series
Optical Power Meter to automatically use the proper calibration
wavelength. This feature reduces the need for communication between
the two technicians and decreases the possibility of making mistakes.
T’COM FHS2 Series Optical Laser Source offers excellent stability and
portability for accurate fibre optic testing. Single output port provides
stable laser power at dual wavelengths. The compact unit operates in
either continuous wave (CW) mode or modulated mode. A low battery
indicator reminds the user of replacing the battery.

Features:
• Easy-to-use, straight forward operation
• Eye-catching handheld appearance
• LCD backlight for easy operation in dark environment
• ±3dB adjustable output
• Rechargeable battery inside
• 850 & 1300nm available for multimode testing
• One-year warranty and recommended calibration interval

Specification

Type FHS-2D02 FHS- FHS-2D03 FHS-2D03F
2D02F
Output Wavelength
Emitter Type 1310 & 1550nm 850 & 1300nm

Output Stability LD

Central Wavelength short term (15min): <±0.05dB@1310, 1550nm; ±0.1dB@850&1300
Spectral Width
Output Frequency(Hz) long term (5hours):<±0.1dB@1310, 1550nm; ±0.2dB@850&1300

1310±20nm & 1550±20nm 850±10nm & 1300±20nm

5nm

270Hz, 1kHz, 2kHz

Output Power -5dBm±0.5dB

Adjustable Range ±3dB,0.1dB/ ±3dB,0.1dB/ N/A
N/A step

step

Auto Power-off Yes

Back-light Yes

Operating Temperature -10 to +50°C

Storage Temperature -20 to +70°C

Power supply 2pcs*Ni-MH AA (2500mAh)

Dimension 160mmL*76mmW*45mmH

Net Weight 270g

Standard Accesories:

FC/PC adapter, SC/PC adapter, 3*ceramic sleeves, 2*AA rechargeable batteries, AC/
DC charger, carrying bag, user manual, test report

ST adapter (model: N000500);

Male FC to female LC adapter for LC connector (model: HD078)

10

TEST EQUIPMENT | LASER SOURCE
TEST EQUIPMENT | POWER METER

TCOM FHS2 SERIES OPTICAL LASER SOURCES

Description:
FHS2Q Series Optical Laser Source is an advanced version of FHS2
Series of Optical Laser Sources, with two more calibrated wavelengths.

Auto-wavelength Recognition:
FHS2Q Series Optical Laser Source transmits with a wavelength-
identification digital encrypted protocol, enabling FHP2 Series
Optical Power Meter to automatically use the proper calibration
wavelength. This feature reduces the need for communication
between the two technicians and decreases the possibility of making
mistakes.

FHS2Q Series Optical Laser Source offers excellent stability and
portability for accurate fiber optic testing.
Two output ports provide stable laser power at four wavelengths. The
compact unit operates in either continuous wave (CW) mode or
modulated mode. A low battery indicator reminds the user of
replacing the battery.

Features:

• Easy-to-use, straight forward operation
• Eye-catching handheld appearance
• LCD backlight for easy operation in dark environment
• Rechargeable battery inside
• Four wavelengths available for multi-purpose testing

One-year warranty and recommended calibration interval

Type FHS-2Q01F FHS-2Q02F

Output Wavelength 850/1300/1310/1550nm 1310/1490/1550/1625nm

Emitter Type LD

Output Stability Short Term (15 minutes): Short Term (15 minutes):
Central Wavelength <±0.05dB@1310,1550nm; <±0.05dB@1310,1550nm:
±0.1dB@850&1300nm ±0.1dB@1490,1625nm
Long Term (8 hours): Long Term (5 hours or above):
<±0.1dB@1310,1550nm; <±0.1dB@1310,1550nm):
±0.2dB@850&1300nm ±0.2dB@1490,1625nm

1310±20nm & 1550±20nm 850±10nm & 1300±20nm

Spectral Width 5nm

Output Frequency 270Hz, 1KHz, 2KHz

Output Power -5dBm±0.5dB

Auto Power-off Yes

Back-light Yes

Operating Temperature -10 to +50

Storage Temperature -20 to +70

Power Supply 2pcs*Ni-MH AA (2500mAh)

Dimension 160mmL*76mmW*45mmH

Net Weight 270g

Standard Accessories:

2*FC/PC adapters, 2*SC/PC adapters, 3*ceramic sleeves, 2*AA rechargeable batteries, AC/
DC charger, carrying bag, user manual, test report
Optional Accessories:

2*ST adapters (model: N000500);
Male FC to female LC adapter for LC connector (model: HD078)
Customization:

APC laser launcher

11

TEST EQUIPMENT | POWER METER

T’COM FHP2 SERIES OPTICAL POWER METER

Description:
T’COM Series Optical Power Meter is the advanced version of OPM
series. It is more functional and intelligent. Under the situation of
laboratory, LANs, WANs and CATV as well as long distance optical
network, Optical Power Meters, together with T’COM's Stabilized
Optical Laser Sources, can be used to identify optical fibre, measure
optical attenuation, verify continuity an evaluate fibre link transmission
quality.

Auto-wavelength Recognition:
T’COM FHS2D02 Optical Laser Source can transmit with a wavelength
identification digital encrypted protocol, enabling FHP2 Series Optical
Power Meter to automatically switch to the proper calibration
wavelength. This feature reduces the need for communication between
the two technicians and decreases the possibility of making mistakes.

Testing Range:
Maximum testing range up to 150km (when using T’COM’s FHS2D02
Optical Laser Source with T’COM’s FHP2A04 Optical Power Meter)

Feature:
• Integrated with high performance optical detector
• LCD backlight for easy operation in darker environments
• Two powering systems: internal rechargeable batteries or AC

adaptor
• Wide dynamic range and high power measurement capability
• High accuracy and stabilized
• Auto-off function: saves the power and low power consumption

allows extended operation in the field
• Recommended calibration interval

Model FHP-2A04 FHP-2B04
Calibrat-
ed Wavelength 850/1300/1310/1490/1550/1625nm
Detector Type
Accuracy InGaAs ±0.2db±10nW
Resolution ±0.2db±1nW -50 to +26dBm @1550nm
Linearity 0.01dB
Auto Power-off ±5%
Back-light Yes
Reference Value Yes
Connector Yes
Measuring Range Interchangeable FC/PC, SC/PC
USB Interface -70 to +10dBm @1550nm
Data Storage Yes
Wave- Yes
length Recognition
Tone Detection Yes (≥-40dBm) Yes (≥-20dBm)
Operat-
ing Temperature 270, 1k, 2kHz (≥-40dBm) 270, 1k, 2kHz (≥-20dBm)
Storage Temperature
Power supply -10 to +50
Dimension
Net Weight -20 to +70
2pcs*Ni-MH AA (2500mAh); USB cable
160L*76W*45mmH
270g

12

TEST EQUIPMENT | LASER SOURCE

T’COM AOF SERIES OPTICAL LASER SOURCE

Description:
T’COM AOF Series Optical Laser Source is an advanced version of Laser
Sources, with better features and more functions.

Auto-wavelength Recognition:
T’COM AOF Series Optical Laser Source transmits with a wavelength-
identification digital encrypted protocol, enabling T’COM AOF Series
Optical Power Meter to automatically use the proper calibration
wavelength. This feature reduces the need for communication between
the two technicians and decreases the possibility of making mistakes.

T’COM AOF Series Optical Laser Source offers excellent stability and
portability for accurate fibre optic testing.

Single output port provides stable laser power at dual wavelengths. The
compact unit operates in either continuous wave (CW) mode or
modulated mode. A low battery indicator reminds the user of replacing
the battery.

Features:
• Easy-to-use, straight forward operation
• Eye-catching handheld appearance
• LCD backlight for easy operation in dark environment
• ±3dB adjustable output
• Rechargeable battery inside
• 850 & 1300nm available for multimode testing
• 1~3 wavelengths output on a single port;
• High stabilization, built-in optic isolator;
• 270, 1000, 2000 Hz Tone
• Auto-Wave ID output (when work with T’COM power meter

T’COM AOP200);
• Built in VFL (optional);
• Energy save mode;
• Power autonomy of 16 hours ;
• One-year warranty and Three-year recommended calibration

interval

SPECIFICATIONS M8 M3 S3 S4 S5 S6 V01 V10

Model 850 1300 1310 1490 1550 1625 1mW VFL 10mW VFL
Wavelength(nm)
Stabilization * ±0.05dB / 1 hour;±0.1dB / 8 hours

Output Power > - 6dBm @ 1310nm/1490nm/1550nm/1625nm / > -10 dBm @
850nm/1300nm
Modulation
Connector 270Hz, 1KHz, 2KHz
Auto Power Off
Build in VFL FC/PC (or customize)
(Optional)
Wave ID No operation in 10 minutes (can be canceled), Low battery energy
Battery Charge
Operate Time 1mW or 10mW or customize
Power Supply
Yes
AA * 2 batteries or AC/DC power supply adapter
Above 16 hours
AA * 2 batteries or AC/DC power supply adapter

13

TEST EQUIPMENT | POWER METER

T’COM AOP OPTICAL POWER METER

FC, SC, ST adapters and 2.5mm UPP
Data storage
Data transfer (optional)
7X24 real-time test on PC; (optional)
Built-in VFL (optional)
Energy save mode
Reference value storage
Power autonomy of 100 hours
850/1300/1310/1490/1550/1625nm
One-year warranty and Three-year recommended calibration interval

Model AOP100T AOP100C

Display Range 1310/1490/1550/1625: +10 ~ -70dBm 1310/1490/1550/1625: +26 ~ -50dBm

Accuracy * 850/1300: +10 ~ -60dBm 850/1300: +26 ~ -40dBm
Calibrated Wavelengths
Resolution ± 0.2 dB
Connector
REF 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm
Automatic Power Off
Build in VFL (Optional) 0.01dB
LED Light
Automatic Power Off FC & 2.5mm UPP (option: SC, ST)
Build in VFL (Optional)
Data Storage Yes
Battery Charge
Wave ID (Optional) No operation in 10 minutes (can be canceled), Low battery energy
Data Transfer (Optional)
Real Time Monitor 1mW or 10mW or customize
(Optional)
Battery Life SOS code output
Power Supply
No operation in 10 minutes (can be cancelled), Low battery energy

1mW or 10mW or customize

40 traces

Yes

Yes

Yes

10minutes to 360 days, interval: 0.5s, 2s, 15s, 60s, 180s, 600s

Above 100 hours
AA * 2 batteries or AC/DC power supply adapter

14

TEST EQUIPMENT | FIBER IDENTIFIER

EFI-500 Optical Fiber Identifier

Description:

Fiber Identifier EFI-50

1. Live Fiber Detector EFI-50 adopts flat and
thin top part, bent design for more special
spaces, like terminal bos, distribution box,
splicing tray.

Screen 1.44 inch TFT screen
Max. Input Power +20dBm
Min.Sensitivity -50dBm
Battery AA/LR6 alkaline battery
Modulation Identification Yes
Applicable Fibers 0.25/0.9/2.0/3.0mm fiber
VFL Specifications 1mW，with Glint function
EFI-50T : -70~+6dBm
OPM Specifications
EFI-50C: -50~+26dBm
Dimensions 195mm×96mm×37mm
Weight 140g

15

TEST EQUIPMENT | FIBER IDENTIFIER

AFI-400 Optical Fiber Identifier

Description:

1. AFI-400 Optical Fiber Identifier is an important tool for optical
maintenance, which is used for nondestructive fiber identification work, can
be detect in any location of both SM and MM fiber. Meanwhile it also has
Visual Fault Locator module with fault location function. It is the ideal
instrument for online test.

Function
1.Indicate the signal directions and power in fiber;
2.Indicate the signal presence or absence(Live or dark fiber);
3.Efficiently identifies the traffic direction and frequency tone (270Hz,
1KHz, 2KHz) with audible warning;
4.Displays the relative core power ;
5.Easy-to-replace adaptors;
6.Lower power indication；
7.Build in VFL function.

Specification 750 to 1700nm
Recognizable Wavelength
Range CW, 2kHz, 270 Hz ± 5%
Recognazable Signal Type H 0.9InGaAs 2 pcs
Detector Type 0.25 for bare fibres ; H 3.0 for jacketed fibre
Clamp Type +11dB to –30dBm (Continuous Wave);
Sensitivity @ 1310nm +11dB to –10dBm (Modulated Signal);
+11dB to –35dBm (Continous Wave);
Sensitivity @1550nm +11dB to –18dBm (Modulated Signal);
Signal traffic; signal frequency (2kHz/1kHz/270Hz); signal intensity (5
LED Indicator grades); low battery
-10° to 50° C
Operating Temperature -20° to 70° C
Storage Temperature 1.5V AA batteries *2pcs
Power Supply 230L*43W*48H
Dimension (mm) 200 g
Weight (g)
Battery Life Life >60Hr
Auto function off

16

TEST EQUIPMENT | LASER SOURCE

HW-400XA FIBRETOOL 200X/400X MICROSCOPE

Description:

These low cost, high quality microscopes are available in 200x or 400x magnification, & utilize white LED
light to provide coaxial illumination of connector end-faces. Three “AAA” batteries provide more than 40
hours of use before battery replacement is required. Provide with a universal 2.5mm adapter with other
connector styles available.

Specification 8.76”L×2.16”H
3*AAA batteries
Dimension momentary on/off switch for light source and fine force control wheel
Interchangeable for 2.5mm(SC,ST,FC) and 1.25mm(LC,MU) ferrule connector
Light Sources
• 2.5mm APC Univesal Adapter(Used for SC/APC, FC/APC, ST/APC)
Controls • 1.25mm LC/APC connector adapter

Adapter
interface
Optional
Adapters

PART DESCRIPTION
HW-400XA 400x Microscope w/2.5mm & 125mm adapter

HW-200XA 200x Microscope w/2.5mm & 125mm adapter

The HW-400XA fibre optic microscope utilizes a white light LED for coaxial illumination. Light is
introduced into the optical path (axis) so that it comes out the tip of the objective lens and strikes the
ferrule perpendicular to the end face. This method of illumination produces a high level of resolution
providing excellent detail of scratches and contamination.

17

TEST EQUIPMENT | OPTICAL POWER METER

TCOM FHP12 SERIES MINI OPTICAL POWER METER

Description: 2 YEARS
T’COM FHP12 Series Mini Optical Power Meter has compact WARRANTY
structure and stable performance and ensures high measuring
precision of 850nm, 1300nnm, 1310nm, 1490nm, 1550nm and
1625nm wavelengths. Used together with Optical Laser Source, it
could accurately measure the loss of bier, cable and other passive
optical devices.

Features
• Imported sensor head
• 2.5mm universal interface (support FC/SC/ST connectors)
• Low power consumption, continuous work more than 100

hours
• Linear optical power and logarithmic power display
• Automatic measuring range adjust and power remains

indication
• Relative value measurement
• Compact and portable design

Specification

Type FHP12-A FHP12-B

Display Range +10~-70dBm @1550nm +26~-50dBm @1550nm

Resolution 0.01dB

Calibrated Wavelength 850/1300/1310/1490/1550/1625

Sensor Type InGaAs

Accuracy 0.35dB±1nW 0.35dB±10nW

Working Wavelength 800~1700nm

Continuous Working Hours about 230 hours (standby time: about 3,500 hours)

Power Source 2*AAA dry batteries

Working Temp. -10 to +50 ; <90%RH

Storage Temp. -20 to +70 ; <90%RH

Dimension L120nmxW33nmxH30mm / about 70g

Standard Accessories:

2*AAA batteries, carrying bag, user manual

Optional Accessories:

Male FC to female LC adapter for LC connector (model: HD078)

18

TEST EQUIPMENT | VISUAL FAULT LOCATOR

TCOM VLS VUSIAL FAULT LOCATOR

i. Description:

VLS-8 Series Mini Visual Laser Source totally complies with the human
engineering. It's small in size, easy to operate, portable and integrated
with a launching indicator. A Visual Laser Source is usually used to
inspect the damaged or broken point of a optical fiber, cable, patchcord
and etc. If the inspected fiber does have a defect, user could find the
visual laser at the broken or damaged point. VLS-8 Series Mini Visual
Laser Source is suitable for both single mode and multimode fibers. The
performance of the visual laser source will act a little different on
different fiber coat and color.

Features:

1. Totally comply with the human engineering design. Small, portable 2 YEARS
WARRANTY
and durable

2. Standard multi-adaptor can be applied to connect with almost any

adaptor type. Also provides interchangeable fiber adaptors of several
common types

3. Higher output laser power, max 15km detecting range
4. Integrated with continuous wave and 2Hz modulated wave output

function

Model VLS-8-1 VLS-8-10 VLS-8-15 VLS-8-30
CLASS IIIB
Laser Launcher Level (i) CLASS IIIA CLASS IIIB CLASS IIIB ≥30mW
About 15km
Output Power (ii) ≥1mW ≥10mW ≥15mW About 3 hours

Detecting Range (iii) About 5km About 12Km About 14km About 6 hours
CW Mode Battery Life (iv) About 6 hours About 5 hours
2Hz Mode Battery Life (iv) About 13 hour About 12 hours About 10 hours
Laser Launcher Type s

About 23 hour
s

LD

Optical Connector universal 2.5mm adapter (FC/SC/ST)

Output Wavelength 650nm±10nm

Modulation Frequency CW / 2Hz

Power 2*AAA dry batteries

Working Temperature -10℃ ~+50℃ ; <90%RH

Storage Temperature -20℃ ~+70℃ ; <90%RH

Dimension & Weight L120mm×W33mm×H30mm / about 67.8g

Standard Accessories:

2*AAA batteries, carrying bag, user manual

Optional Accessories:

Male FC to female LC adapter for LC connector (model: HD078)

19

TEST EQUIPMENT | VISUAL FAULT LOCATOR

TCOM VLS VUSIAL FAULT LOCATOR

Features:

1. Totally comply with the human engineering design. Small, porta-

ble and durable

2. Standard multi-adaptor can be applied to connect with almost any

adaptor type. Also provides interchangeable fiber adaptors of sev-
eral common types

3. Higher output laser power, max 15km detecting range
4. Integrated with continuous wave and 2Hz modulated wave output

function

1 YEARS
WARRANTY

Model TC-8-5 TC-8-10 TC-8-20 TC-8-30
Output Power 5mW 10mW 20mW 30mW
Laser Launcher Level CLASS IIIA CLASS IIIB CLASS IIIB CLASS IIIB
Detecting Range 1- 5km 8- 12Km 12-15km 18-20km
CW Mode Battery Life About 13 hours About 6 hours About 5 hours About 3 hours
2Hz Mode Battery Life About 23 hours About 12 hours About 10 hours About 6 hours

Laser Launcher Type LD
Optical Connector Universal 2.5mm adapter
Output Wavelength 650nm±10nm
Modulation Frequency CW / 2Hz
Power 2*AAA dry batteries
Working Temperature -10c~+50c; <90%RH
Storage Temperature -20c~+70c; <90%RH

Dimension & Weight L120mm×W33mm×H30mm / about 67.8g

20

TEST EQUIPMENT | VISUAL FAULT LOCATOR

TCOM LOWCOST PM

1 YEARS TC-37 Mini Optical Power Meter has compact struc-
WARRANTY ture and stable performance and ensures high meas-
uring precision of 850nm, 1300nnm, 1310nm,
1490nm, 1550nm and 1625nm wavelengths. Togeth-
er with Optical Laser Source, it could accurately
measure the loss of bier, cable and other passive op-
tical devices

Type TC-37A TC-37B
Display Range
Accuracy -70~+10dBm -50~+26dBm
Resolution
Calibrated Wavelength 0.35dB±1nW 0.35dB±10nW
Sensor Type
Working Wavelength 0.01dB
Continuous Working
850/1300/1310/1490/1550/1625nm
Hours
Standby Time InGaAs
Adapter
Power Source 800~1700nm
Working Temperature
Storage Temperature About 230 hours
Dimension
About 3500 hours
2.5MM Universal
2*AAA dry batteries
-10c to +50c; <90%RH
-20c to +70c; <90%RH
L120nm x W33nm x H30mm / about 70g

Features:
i. Bright red laser at 650nm
ii. Pulsed and CW operation
iii. Standard AA alkaline batteries
iv. Rugged and weatherproof design
v. 2.5mm universal connector
vi. Fast locate the broken point;
vii. CE Qualified

SPECIFICATIONS

BML205 BML205-1 BML205-10 BML205-15 BML205-20 BML205-25 BML205-30
> 20mW >25mW >30mW
Output Power > 1mW > 10mW > 15mW
> 10 km > 10 kmm > 10 km
Dynamic Dis- 3~5 km 8~10 km > 10 km
tance *

Wavelength 650nm±20nm

Operation Mode Pulsed (2Hz) and CW

Connector ** 2.5mm or 1.25mm Universal connector

* Tested by FOD1205H 650nm optical power meter

** The distance is tested by G.655, single mode

*** Standard connector is 2.5mm UPP, 1.25mm UPP will be customized and increase the cost

21

OPTICAL CABLE | PATCH CORD

SC Fibre Optic Patch Cord

SC fibre optic patch cord (also named SC patch cable, SC jumper) is one of the earliest type and one
of the most commonly used fibre optic cable, it is convenient to use and cost saving, It is the most cheap-
est type fibre optic patch cable. SC fibre patch is widely used in fibre optic networks. SC fibre patch cable
is with zirconia sleeve and plastic housing.

We offer single mode and multimode SC fibre optic patch cables like SC-LC, SC-ST, SC-FC, SC-MU, SC-
MTRJ, SC-E2000 etc. custom design SC fibre optic cable assemblies, 9/125µm, 50/125µm, 62.5/125µm,
SM, MM, simplex, duplex.

Features:
• Simplex or duplex or multi fibre assemblies
• Riser or Plenum rated, LSZH and RoHS cables available
• Low insertion loss, IEC, TIA/EIA, Telcordia compliant good performance on return loss
• Custom fibre optic cable lengths and jacket colours
• Various fibre types and wavelengths, typical 9/125 single mode, 50/125 multimode and 62.5/125

multimode

• 0.9 / 1.8 / 2.0 / 3.0 / mm outer diameter fibre optic cables
• PC, UPC, and APC polish types
• Good packing, competitive prices and very fast delivery

Parameter Singlemode Singlemode Singlemode Multimode
PC UPC APC PC
Insertion loss
Return loss ≤0.3dB ≤0.2dB ≤0.3dB ≤0.2dB
Opreating wavelength
Exchangeability ≥45 ≥50 ≥60 ≥30
Vibration
Operating temperature 1310nm, 1510nm
Storage temperature
≤0.2

≤0.2

-40 to +75

-40 to +85

22

FIBRE OPTIC PATCH CORD

Fibre optic patch cord , sometimes also called fibre optic jumper or fibre optic patch cables. It is one of
the most commonly used component in the fibre optic network, It can make a connection between a
Network interface, or NETWORK port and a media segment We specialized in manufacture high
quality fibre optic patch cords and provide OEM services, All of these patch cable are 100 % tested
before packing and accord with international standard

Applications:
• CATV/Metro
• Active device termination
• Telecommunication network
• Local area networks (LANS)
• Test equipment
• Premise installations
• Wide area network

Features:
• Comply with Telcordia and ROHS
• High quality, durability and repeatability
• Patchcord types: Regular type, FTTH

type, Armoured type, Waterproof type,
MPO/MTP type
• Connectors: SC FC,ST,LC, E2000,MU,MT
-RJ
• High temperature stability

23

OPTICAL CABLE | PATCH CORD

FC Fibre Optic Patch Cord

The FC fibre optic cable is available in both singlemode and multimode versions, and is fully intermatea-
ble with NTT-FC products. Both singlemode and multimode versions FC fibre patch come with a zirconia
ceramic ferrule with pre-polished PC profile and convex spherical end. These endface types allow for
faster polishing, and low back reflection and optical loss, while ensuring maximum repeatability.

We are supplier of fibre optic products, offer high performance FC-FC, FC-LC, FC-SC, FC-ST, FC-
MTRJ, FC-MU, FC-E2000, 9/125, SM, 50/125, MM, simplex, duplex, single mode, multimode, UPC,
APC, PC. fibre optic patch cables (fibre optic jumpers). And we also accept OEM/ODM order, we are
happy to help you elevate your brand influence, package with your style.

• Connectors: FC, SC, ST, LC, MU, MTRJ, MPO, E2000, D4
• Fibre optic ferrule: FC/UPC, FC/APC
• Fibre Core: Simplex, Duplex
• Fibre Type Single mode(SM), 9/125, multimode(MM), 50/125, 62.5/125.
• Cable Jacket: PVC, LSZH
• Cable Diameter 2.0mm 3.0mm
• Cable Color：Yellow, Orange, Aqua, others

Parameter Singlemode PC Singlemode Singlemode Multimode
UPC APC PC

Insertion loss ≤0.3dB ≤0.2dB ≤0.3dB ≤0.2dB

Return loss ≥45 ≥50 ≥60 ≥30

Opreating wavelength 1310nm, 1510nm

Exchangeability ≤0.2

Vibration ≤0.2

Operating temperature -40C to +75C

Storage temperature -40C to +85C

24

OPTICAL CABLE | PATCH CORD

E2000 Fibre Optic Patch Cord (E2K Jumper)

Constant innovation in the field of fibre optics has created demand for products with ever increasing
performance requirements. The E-2000 fibre optic cable system is to address the customers’ highest
expectations. The E-2000 fibre cable assemblies result in super performance on insertion loss as
well as exceptional repeatability.

We are supplier of E2000 fibre optic cable assemblies, product include E2000-LC, E2000-SC,
E2000-ST, E2000-FC, E2000-MU, E2000-MTRJ,etc ,single mode and multimode types, simplex, du-
plex, PC, UPC, APC, cable length and various fibre glass optional.

And we also accept OEM/ODM order, we are happy to help you elevate your brand influence, package
with your style.

Features
• Low insertion loss
• High return loss
• High stability and reliability

Parameter Singlemode PC Singlemode Singlemode Multimode
UPC APC PC

Insertion loss ≤0.3dB ≤0.2dB ≤0.3dB ≤0.2dB

Return loss ≥45 ≥50 ≥60 ≥30

Opreating wavelength 1310nm, 1510nm

Exchangeability ≤0.2

Vibration ≤0.2

Operating temperature -40Cto +75C

Storage temperature -40C to +85C

25

OPTICAL CABLE | PATCH CORD

ST Fibre Optic Patch Cord

ST Patch cord has a bayonet-style housing and a long spring-loaded ferrule hold the fibre. They are avail-
able in both multimode or singlemode versions. Horizontally mounted simplex and duplex adapters are
available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve. The ST
fibre patch cord is one of the older generations of connector, but is still widely used for multimode net-
works, including LANs for buildings and campuses.

We offer ST fibre cables and ST fibre patch, including single mode 9/125µm and multimode 50/125µm,
multimode 62.5/125µm, ST to ST, ST to SC, ST to LC, ST to MU, ST to MTRJ, ST to MPO, ST to E2000,
ST to FC. Other types also available for custom design. Excellent quality and fast delivery.
We also accept OEM order, and package the ST jumpers with your style.

Features:

• Low insertion loss
• High return loss
• High stability and reliability

Parameter Singlemode PC Singlemode Singlemode Multimode
UPC APC PC

Insertion loss ≤0.3dB ≤0.2dB ≤0.3dB ≤0.2dB

Return loss ≥45 ≥50 ≥60 ≥30

Opreating wavelength 1310nm, 1510nm

Exchangeability ≤0.2

Vibration ≤0.2

Operating temperature -40C to +75C

Storage temperature -40C to +85C

26

OPTICAL CABLE | PATCH CORD

LC Fibre Optic Patch Cord

Fibre Optic LC patchcord is with a small form factor (SFF) connector and is ideal for high density appli-
cations. The LC fibre patch connector has a zirconia ceramic ferrule measuring 1.25mm O.D. with either
a PC or APC endface, and provides optimum insertion and return loss. The LC fibre patch cable connect-
or is used on small diameter mini-cordage (1.6mm/2.0mm) as well as 3.0mm cable. LC fibre cable con-
nectors are available in cable assembled or one piece connectors.

We offer LC fibre cables and LC fibre patch, including single mode 9/125µm and multimode 50/125µm,
multimode 62.5/125µm, LC Uniboot-LC Uniboot, LC-LC, LC-SC, LC-ST, LC-MU, LC-MTRJ, LC-MPO,
LC-E2000, LC-FC. Other types also available for custom design. Excellent quality and fast delivery. We
also accept OEM order, and package the LC jumpers with your style.

Features:
• Low insertion loss
• High return loss
• High stability and reliability

Parameter Singlemode PC Singlemode Singlemode Multimode
UPC APC PC

Insertion loss ≤0.3dB ≤0.2dB ≤0.3dB ≤0.2dB

Return loss ≥45 ≥50 ≥60 ≥30

Opreating wavelength 1310nm, 1510nm

Exchangeability ≤0.2

Vibration ≤0.2

Operating temperature -40C to +75C

Storage temperature -40C to +85

27

OPTICAL CABLE | HARNESS CABLE

SINGLEMODE FIBRE OPTIC HARNESS CABLE, 24 FIBRE, ELITE MALE,
LSZH-YELLOW, BUNCH

9/125µm Single-Mode Fan-out Fibre Patch Cable - 24 Fibres

This cable meets RoHS compliant, and 100% optically tested for insertion loss before shipment, this is
very cost-effective for your network cabling, and can be used for longer runs than multimode because
they have more resistance to attenuation.

The multifibre cables, provided by ERSB, refer to the 4, 6, 8, 12, 24 and 48 cores. We also provide a full
set of OEM service, such as fibre, connector, length, colour, fibre grade, specification, material, package
etc.

Item Details KEY FEATURES:
Good exchangeability
Fibre Counts: 24 Low insertion loss and back reflection
Fibre Mode: 9/125µm Easy to use, easy to install and maintain
SMBreakout O.D: 0.9mm Support 10 gigabit data transmitting rates100% op-
Insertion Loss: <0.3dB tically tested to ensure high performance
Return Loss: >50dB Standard or custom configuration
Cable Jacket/Color: PVC/Yellow

28

OPTICAL CABLE | FTTH DROP CABLE

2 FIBRES SINGLE-MODE KFRP STRENGTH MEMBER MESSENGER WIRE
LSZH FTTH DROP CABLE-GJXFH

Cable Type FTTH Drop Cable Fiber Count 2 Fibers

Construction Self-supporting Fiber Type Singlemode G.657A

Outer Jacket Material LSZH (Black/White) Strength Member Material FRP

Cable Diameter (2.0±0.2)×(5.0±0.2)mm Cable Weight 20kg/km

Tensile Strength (long/ 100/200N Crush Load (long/short term) 300/1000 (N/100mm)
short term)

Bending Radius (long/short 10D/20D (mm) Operating/Storage Tempera- -40 to +60°C
term) ture

Description:

The drop FTTH cables are with flame retardant jacket and with supporting wire, there are strengthen members
inside the cables for supporting the whole cables. The optical fibre cable is with special structure so it is easy to
pull the fibres out from the cables, the FTTH drop cables are ideal to use for direct installation into the houses,
suitable for being used in homes and offices.

Two Kevlar fibre reinforced plastic are placed at the two sides, the cable is completed with LSZH sheath. Single
steel wire as additional strength member ensuring good performance of tensile strength. It is a highly
recommended FTTH drop cables for use in the fibre to the home projects, saving time and cost.

Features:
i. Non-metallic strength member is Kevlar fibre reinforced plastic known as K-FRP.
ii. Environmental protection-Low smoke, zero halogen and flame retardant sheath.
iii. Single steel wire as additional strength member ensuring good performance of tensile strength and self-

supporting.
iv. Simple structure, light weight.

Application:
1. Use in the fibre to the home projects
2. Ideal to use for direct installation into the houses
3. Suitable for being used in homes and offices

29

OPTICAL CABLE | FTTH DROP CABLE

2 Fibers Singlemode 9/125 OS2, KFRP Strength Member, LSZH Butterfly Flat Indoor
FTTH Drop Cable GJXFH

GJXFH FTTH Indoor Drop Cable uses butterfly flat structure, whose optical fiber unit is positioned in
the centre. Two parallel Kevlar Fiber Reinforced Plastic (KFRP) strength members are placed at the
two sides. Then, the cable is completed with LSZH sheath. FTTH indoor cable has a much greater
bandwidth to carry data and less susceptible to interference than common indoor fiber cables. With
small diameter, water-resistant, soft and bendable characteristics, it's easy to deploy and maintenance.
In addition, the non-metallic strength member can provide lightning protection and anti-
electromagnetic interference. FTTH cables are ideal for indoor cabling, end users directly cabling, and
access network.

Cable Type FTTH Drop Cable Fiber Count 2 Fibers

Construction Butterfly Flat Fiber Type Singlemode G.657A

Outer Jacket Material LSZH (Black/White) Strength Member Ma- KFRP
terial

Cable Diameter (2.0±0.2)×(3.0±0.2)mm Weight 10kg/km

Tensile Strength 100/200N Crush Load (long/ 300/1000 (N/100mm)
(long/short term) short term)

Bending Radius (long/ 10D/20D (mm) Operating/Storage -40 to +85 °C
short term) Temperature

Good waterproof preformance Access network
Local area network (LAN)
Low smoke, zero halogen and flame retardant Used end users directly cabling
sheath Fiber optic communication system

Smaller diameter, simple structure, light weight,
and high practicability

KFRP strength member ensures anti- FTTH (fiber to the home) indoor cabling and
electromagnetic and bending property distribution

Special low-bend-sensitivity fiber provides high
bandwidth data transmission

Novel flute design, easily strip and splice, simplify
installation and maintenance

30

OPTICAL CABLE | PATCH CORD

SM 9/125 SIMPLEX FIBRE PATCH CABLE FTTH DROP CABLE FRP
G652D PVC

Key Features: Applications:
FTTH Drop cable is designed for last-one-mile in
the FTTX network, enhancing the accessibility to • Fibre is not in stock, we will use G657A1 as
the fibre and maximizes the installation default.
workability.
• Access network, FTTH (Fibre to the home)
FTTH Cable directly connected to their homes, Indoor cabling, and end users directly
their bandwidth, wavelength and transmission cabling Access building cable
technology. Also, customers can specify your
required connectors. • Special low-bend-sensitivity fibre provides
high bandwidth and excellent
Notes: communication transmission property
1. This picture is for SC-SC SM DX FTTH
• Two parallel FRP strength members ensure
Indoor Cable. Please just take it as a good performance of crush resistance to
reference. protect the fibre
2. If the G652DSpecial low-bend-sensitivity
fibre provides high bandwidth and excellent • Single steel wire or massagers as the
communication transmission property additional strength member ensures good
performance of tensile strength

• Simple structure, light weight and high
practicability

• Novel flute design, easily strip and splice,
simplify the installation and maintenance

• Low smoke zero halogen and flame
retardant sheath

31

OPTICAL CABLE | PATCH CORD

SM 9/125 SIMPLEX FIBRE PATCH CABLE FTTH DROP CABLE FRP G652D
PVC

Key Features: Applications:
FTTH Drop cable is designed for last-one-mile in
the FTTX network, enhancing the accessibility to • Fibre is not in stock, we will use G657A1 as
the fibre and maximizes the installation default.
workability.
• Access network, FTTH (Fibre to the home)
FTTH Cable directly connected to their homes, Indoor cabling, and end users directly
their bandwidth, wavelength and transmission cabling Access building cable
technology. Also, customers can specify your
required connectors. • Special low-bend-sensitivity fibre provides
high bandwidth and excellent
Notes: communication transmission property
1. This picture is for SC-SC SM DX FTTH
• Two parallel FRP strength members ensure
Indoor Cable. Please just take it as a good performance of crush resistance to
reference. protect the fibre
2. If the G652DSpecial low-bend-sensitivity
fibre provides high bandwidth and excellent • Single steel wire or massagers as the
communication transmission property additional strength member ensures good
performance of tensile strength

• Simple structure, light weight and high
practicability

• Novel flute design, easily strip and splice,
simplify the installation and maintenance

• Low smoke zero halogen and flame
retardant sheath

32

OPTICAL CABLE | REELS

BARE FIBRE REEL - BARE FIBER REEL, SINGLE MODE G652/
G.657A, FC/SC/LC CONNECTORS SELECTABLE

Description: Application:

T’COM provides bare fiber reel for testing project. i. Suitable for high capacity, high data rate
Both G.652 and G.657A type bare fiber are metro
available. T’COM bare fiber reel delivers a good
macrobending performance in the industry while ii. Long haul network applications
maintaining compatibility with current optical
fibers, equipment, practices and procedures. This Features:
full-spectrum single-mode optical fiber reel when
subjected to smaller radii bends experiences − Full-spectrum single mode fiber
virtually no signal loss. It is your best assistant in
testing project. − Small macrobending radii, comply with
G.657A or G.652D standard

− Small attenuation value

− Suitable for any optical testing environment

Physical parameters

Fiber type Single mode

Diameter of coated fiber 250um

Diameter of bare fiber 125um

Min macrobending radii 33mm(G.652D) / 15mm(G.657A)

Typical attenuation value

1310nm working wavelength 0.33~0.35dB/km

1490nm working wavelength 0.21~0.24dB/km

1550nm working wavelength 0.19~0.20dB/km

1625nm working wavelength 0.21~0.23dB/km

33

OPTICAL CABLE | SPLITTER

MICRO TYPE PLC SPLITTER

Description:

T’COM provides a high precise PLC splitter for the construction of optical network. Low requirements
of placing position and environment, compact micro type design. It is especially suitable for tiny room
installation and can be easily placed into different types of terminal boxes and distribution boxes, in
favor of splicing and staying in tray without additional space reservation.

T’COM provides a high precise Micro type PLC splitter for the construction of optical network. Low
requirements of placing position and environment, compact micro type design. It is especially suitable
for tiny room installation and can be easily placed into different types of terminal boxes and
distribution boxes, in favor of splicing and stay in tray without additional space reservation. It can be
Feeasailtyuarpepsli:ed in FTTx construction, optical network construction, CATV networks and etc.

1. Compact design
2. Low insertion loss and low PDL
3. High reliability
4. High channel counts
5. Wide wavelength range
6. Large operating and temperature range
7. Customized packaging and configuration
8. Full Telcordia GR1209/1221 qualifications

Specification

1×N (N>2) PLCS (With connector) Optical parameters

Parameters 1×2 1×4 1×8 1×16 1×32 1×64

Operation wavelength (nm) 1260~1650 17.1 20.4
55 55
Insertion loss (dB) Max 4.1 7.4 10.5 13.8 50 50
0.3 0.3
Return loss (dB) Min APC 55 55 55 55 55 55
UPC 50 50 50 50 0.5 0.5

PDL (dB) Max 0.2 0.2 0.3 0.3 50×7×4 60×12×4

Directivity (dB) Min 55 55 55 55 2×32 2×64

WDL (dB) 0.4 0.4 0.4 0.5 17.4 20.7
55 55
Pigtail length (m) 1.2(±0.1) or customer specified 50 50
0.4 0.4
Fibre type SMF-28e with 0.9mm tight buffered fibre 55 55
0.5 0.5
Operation temperature (°C) -40~85
60×7×4 60×12×6
Storage temperature (°C) -40~85

Dimension (L×W×H) (mm) 40×4×4 40×4×4 40×4×4 40×4×4

2×N (N>2) PLCS (With connector) Optical parameters

Parameters 2×4 2×8 2×16

Operation wavelength (nm) 1260~1650

Insertion loss (dB) Max 7.7 10.8 14.1

Return loss (dB) Min APC 55 55 55
UPC 50 50 50

PDL (dB) Max 0.2 0.3 0.4

Directivity (dB) Min 55 55 55

WDL (dB) 0.4 0.4 0.5

Pigtail length (m) 1.2(±0.1) or customer specified

Fibre type SMF-28e with 0.9mm tight buffered fibre

Operation temperature (°C) -40~85

Storage temperature (°C) -40~85

Dimension (L×W×H) (mm) 50×4×4 50×4×4 60×7×4

34

OPTICAL CABLE

GYXTW FIBRE OPTIC CABLE

Description:
GYXTW is an outdoor use optical fibre cable
suitable for duct and aerial applications. We
supply GYXTW from 2 fibre cores to 24 fibre cores.
Both single mode type and multimode types are
available.

Applications
These central loose tube optical fibre ribbon cables
are suitable for installation in aerial or duct
environment for communication between bureaus,
metropolitan network, access network and is
especially suitable for the situation where high-
density fibres is expected.

Features
i. Up to 24 fibre cores.
ii. The loose tube is centrally situated with good excess length and minimizes the influence of lateral

crush.

GYTA53 FIBRE OPTIC CABLE

Description:

GYTA53 is the steel tape armored outdoor fibre
optic cable used for direct buried. We supply single
mode GYTA53 fibre optic cable and multimode
GYTA53 fibre optic cables; fibre counts from 2 to
432.

Applications iv. resistance and rodent resistance.
These corrugated steel tape and aluminum tape Metal strength member provides excellent
armored and double sheath cables are suitable for strain performance.
installation in harsh environments where
mechanical impact on the cable is to be
expected.e.g. in direct buried application. They are
also suitable for installation in ducts where the
rodent or moisture resistance is to be expected
Features
i. Up to 144 fibre cores.
ii. The loose tube stranding technology make

the fibres have good secondary excess
lengthand allow the fibres free movement in
the tube, which keeps the fibre stress-free
while the cable is subjected to longitudinal
stress.
iii. Corrugated steel tape armored and double
PE sheath providing excellent crush

35

OPTICAL CABLE

GYTS FIBRE OPTIC CABLE

Description:

GYTS is the outdoor fibre optic cable type used for
duct and aerial applications. We supply single
mode GYTS fibre optical cable and multimode
GYTS fibre optic cable, fibre strand from 2 cores to
432 cores. A related GYTA type cable is available.

Applications:
These corrugated steel tape armored cables are suitable for installation in aerial or duct environment for
long haul communication, LAN, especially suitable for the situation of high requirements to lateral pres-
sure resistance.

Features
i. Up to 144 fibre cores.
ii. The loose tube stranding technology make the fibres have good secondary excess length and allow
iii. The fibres free movement in the tube, which keeps the fibre stress-free while the cable is subjected

to longitudinal stress.
iv. Corrugated steel tape armored and PE outer sheath providing property crush resistance and gun

shot resistance features.
v. Metal strength member provides excellent strain performance.

GYTA FIBRE OPTIC CABLE

Description:
GYTA fibre optic cable is used for duct or aerial ap-
plications; we supply the single mode GYTA and
multimode GYTA cables. These aluminum tape ar-
mored cables are suitable for installation for long
haul communication and LANs, especially suitable
for the situation of high requirements of moisture
resistance.

GYTA is the stranded loose tube fibre optic cable with compact structure; the cable jacket is made of
strong Polyethylene. This fibre optic cable features the good mechanical and temperature performance.
GYTA is with high strength loose tube that is hydrolysis resistant and the optical cable filling materials
ensure high reliability, its APL makes the cable crush resistant and moisture proof. The GYTA fibre op-
tic cable is available from 2 cores to 144 cores.

36

OPTICAL CABLE

Multi-Core Round Tight Buffered Distribution Indoor Fiber Optic Cable I Features
Good mechanical and environmental characteristics.
Flame retardant characteristics meet the requirements of relevant standards.
The mechanical and physical characteristics of the outer jacket meet the requirement of relevant
standards.
Soft, flexible and easy to do stripping, splicing and cabling.
Multi-Core Round Tight Buffered Distribution Indoor Fiber Optic Cable I Availabilities
Fiber count: 4, 6, 8, 10, 12
Types of fiber: G.652 A/B/C/D or G.655 A/B/C singlemode optic fiber; OM1, OM2 or OM3 multimode
optic fiber, or other types of optic fiber.
Material of jacket: Flame retardant polyvinyl chloride (PVC); low smoke zero halogen (LSZH) flame
retardant polyolefin; thermoplastic polyurethane (TPU); environmental materials and mouse-proof
materials are also used where there are environmental or special requirements, or other customized
material.
Colour of jacket and fiber meets the requirements of relevant standards, or customized colour.
Cable dimension: the nominal diameter, or customized dimension.
Delivery length: 1km or 2km or customized length.
Multi-Core Round Tight Buffered Distribution Indoor Fiber Optic Cable I Applications Indoor cabling and
distribution.
Interconnection of fiber optic equipments, especially ODF.
Used in patch cords and pigtails

Single Core Round Tight Buffered Indoor Fiber Optic Cable Features
Good mechanical and environmental characteristics.
Flame retardant characteristics meet the requirements of relevant standards.
The mechanical and physical characteristics of the outer jacket meet the requirement of relevant
standards.
Soft, flexible and easy to do stripping, splicing and cabling.
Single Core Round Tight Buffered Indoor Fiber Optic Cables Availabilities
Types of fiber: G.652 A/B/C/D or G.655 A/B/C singlemode optic fiber; OM1, OM2 or OM3
multimode optic fiber, or other types of optic fiber.
Material of jacket: Flame retardant polyvinyl chloride (PVC), low smoke zero halogen (LSZH) flame
retardant polyolefin, thermoplastic polyurethane (TPU), or other customized material.
Color of jacket and fiber meets the requirements of relevant standards, or customized color.
Cable dimension: the nominal diameter, or customized dimension.
Delivery length: 1km or 2km or customized length.
Single Core Round Tight Buffered Indoor Fiber Optical Cable Applications
Used in patch cords and pigtails
Interconnection of fiber optic equipments

37

OPTICAL CABLE | PATCH CORD

Fibre Optic Pigtails

Manufacturer, supplier, fibre optic pigtails, China, SC, fan out, SC/APC, UPC, PC, single mode, ST, ST/
APC, FC, FC/APC, LC, LC/APC, MT-RJ, MPO,multimode,OM3,OM2,OM1,OM4,OS1,MTP, E2000,
E2000/APC. Commonly used fibre optic pigtail is compliant to the standards of ITU-T and Telcordia, we
supply single mode OS1 fibre pigtails and multimode fibre pigtails with OM1,OM2,OM3 and OM4 fibres.

We supply the simplex standard 0.9mm fibre optic pigtails, the cable colour can be custom made, and we
supply the fan out fibre optic pigtails, these fibre optic pigtails can be made with 0.9 or 2/3mm break out
cables, there are also waterproof fibre optic pigtails available, these fibre pigtails are used in outdoor
harsh environment, for indoor use armoured pigtails, there are smaller diameter stainless steel inner
armored fibre optic pigtails single mode and multimode types.

FE2KAPC2M E2000 FIBRE OPTIC PIGTAIL

The E2000 fibre optic pigtail connector is one of the few fibre optic con-
nectors featuring a spring-loaded shutter which fully protects the ferrule
from dust and scratches. E2000 is compliant with EN 186270 and IEC
61754-15 standards. E2000 cables are simplex and duplex types, with 9/125
single mode, 50/125 multimode or 62.5/125 multimode fibres. E2000 fibre
pigtail cables are PC, UPC and APC types.

FST-SPX ST FIBRE OPTIC PIGTAIL

ST fibre optic pigtail connector is with metal outer body and with a long
spring loaded ferrule hold the optical fibre. ST Cable can be 9/125 single
mode or 50/125 multimode or 62.5/125 multimode. ST fibre pigtails con-
nector ferrule interface can be PC, UPC or APC. ST is one of the older gen-
erations of connector, but it is still widely used in fibre optic communica-
tions, especially for multimode networks.

FLC-SPX LC FIBRE OPTIC PIGTAIL

LC fibre optic pigtail connectors feature the RJ-45 style interface with low
insertion loss and low back reflection; it is with high precision alignment
and is widely used all over the world. We supply both simplex LC cable and
duplex LC cable. The connector is with a 1.25mm O.D zirconia ceramic fer-
rule; LC fibre pigtail cable can be 9/125 single mode or 50/125 multimode
or 62.5/125 multimode, PC, UPC or APC end face.

FSCAPC-09SPX-2 SC FIBRE OPTIC PIGTAIL

The SC fibre optic pigtail connectors are compliant to IEC, TIA/EIA, NTT
and JIS specifications. It is with one piece construction and pulls proof de-
sign. SC is low cost but high performance, which makes it one of the most
popular cables. We supply the single mode 9/125, multimode 50/125 and
multimode 62.5/125 types SC fibre optic pigtail cables.

38

OPTICAL CABLE | PATCH CORD

Fibre Optic Bend insensitive

Data centers, wiring closets and utility boxes are increasingly stretched for space. Installing fiber into the
spaces has become increasingly difficult due to the delicate nature and bend requirements of traditional
fiber-optic cabling. More often, telecommunications and wireless carriers, along with a host of fortune
500 companies and the US government, are mandating that bend insensitive fiber be deployed wherever
fiber-optic connections are required. Bend insensitive fiber allows for extraordinarily tight radii, which is
just a fraction of the radius required by standard fiber-optic cabling. This additional forgiveness allows
installers greater flexibility in a larger number of environments to install the high-speed fiber demanded
by so many applications. We offer an amazing selection of the single mode 9/125 bend insensitive fiber
in yellow, with a dizzying array of fiber-optic connectors. Use these bend insensitive jumpers wherever a
tight radius would normally present a problem for traditional fiber cabling.
armored fibre optic pigtails single mode and multimode types.
Bend Insensitive Fiber Optic Cable is less attenuation when bend or twisted compared with traditional
fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It
also can save more space for your high density cabling in data centers and other enterprise networks.

SC UPC to SC UPC 9/125 OS2 Single Mode Bend Insensitive Fiber Optic Cable

Product Specifications

Fiber Connector SC UPC to SC UPC Fiber Mode SMF 9/125µm

Fiber Type Simplex Fiber Jacket 2.0mm, PVC

Insertion Loss ≤ 0.3dB Wavelength 1310/1550nm

Cladding Diameter 125 ± 1 µm Jacket Color Yellow

Fiber Class G.657.A1 (Compatible Minimum Bend Ra-
with G.652) 10mm
Operating tempera-
ture dius

-40 ~ 75°C Compliants RoSH, ISO9001

39

OPTICAL CABLE | ADAPTORS

SC/UPC to SC/UPC SC/UPC to SC/UPC SC/APC to SC/APC
Simplex Singlemode Duplex Singlemode Duplex Singlemode
Plastic Fiber Optic Plastic Fiber Optic Fiber Optic Adapter,
Adapter Adapter 0.05dB IL

FC/UPC to FC/UPC FC/UPC to FC/UPC FC/APC to FC/APC
Simplex Singlemode Simplex Singlemode/ Simplex Singlemode
Square Solid Type One Multimode Metal Small D Fiber Optic
piece Metal Fiber Small D Fiber Adapter

LC/UPC to LC/UPC LC/UPC to LC/UPC LC/UPC to LC/UPC
Simplex Singlemode Duplex Singlemode SC Duplex OM1/OM2 SC
Square Solid Type One Type with Flange Plas- Type Plastic Fiber Op-
piece Metal Fiber tic Fiber Optic Adapt- tic Adapter
er

LC/UPC to LC/UPC LC/APC to LC/APC LC/APC to LC/APC
Duplex OS2 Single- Duplex Singlemode SC Simplex Singlemode
mode Standard Type Type Plastic Fiber Op- Plastic Fiber Optic
Fiber Optic Adapter tic Adapter Adapter

E2000/APC to E2000/UPC to E2000/UPC to
E2000/APC Simplex E2000/UPC Simplex E2000/UPC Simplex
Singlemode Plastic Singlemode Plastic OM3/OM4 Plastic
Fiber Optic Adapter Fiber Optic Adapter Fiber Optic Adapter

40

OPTICAL CABLE | ADAPTORS

ST/UPC to ST/UPC Sim- ST/UPC to ST/UPC Simplex ST/UPC to ST/UPC Duplex
plex Singlemode Metal Fi- Multimode Metal Fiber Optic Singlemode Metal Fiber Op-
ber Optic Adapter Adapter tic Adapter

ST/APC to ST/APC Simplex ST/UPC to ST/UPC Duplex FC/APC to FC/APC Simplex
Singlemode Fiber Metal Plastic Fiber Optic Adapter Singlemode Small D Fiber
Adapter Optic Adapter

Hybrid Adapters

Female to Female Hybrid Adapters
Male to Female Hybrid Adapters

FC to LC Hybrid Simplex SC to ST Hybrid Simplex Plas- FC-SC Hybrid Simplex cop-
Metal Fiber Optic Adapter tic Fiber Optic Adapter per Fiber Optic Adapter

LC/UPC to LC/UPC Duplex LC/APC to LC/APC Duplex LC/APC to LC/APC Simplex
OS2 Singlemode Standard Singlemode SC Type Plastic Singlemode Plastic Fiber Op-
Type Fiber Optic Adapter Fiber Optic Adapter tic Adapter

41

OPTICAL CABLE | HYBRID ADAPTORS

FC-SC Hybrid Simplex Fi- ST-SC Hybrid Simplex Fiber E2K APC-SC APC Hybrid
ber Optic Adapter Optic Adapter Simplex Plastic Fiber Optic
Adapter

FC-SC Hybrid Simplex Fi- E2000/APC to FC/UPC Hybrid SC-LC Hybrid Simplex Plas-
ber Optic Adapter Simplex Half Plastic Half Metal tic Fiber Optic Adapter
Fiber Optic Adapter

LC-SC Hybrid Simplex ST/APC to SC/APC Hybrid FC-SC Hybrid Simplex
Plastic Fiber Optic Adapter Simplex Singlemode Metal Fi- Plastic Fiber Optic Adapter
ber Optic Adapter

FC/UPC to SC/UPC Duplex SC to LC Hybrid Simplex Metal FC-ST Hybrid Simplex Met-
OS2 Singlemode Standard Fiber Optic Adapter al Fiber Optic Adapter
Type Fiber Optic Adapter

ST-SC Hybrid Duplex Metal FC/APC to SC/APC Hybrid Du- LC-SC Hybrid SM/MM Du-
Fiber Optic Adapter plex Singlemode Plastic Fiber plex Metal Fiber Optic
Optic Adapter Adapter

42

ATTENUATOR | HYBRID ADAPTORS

FC/UPC to LC/APC Hybrid LC/APC to SC/UPC Hybrid FC Female to ST Male Sim-
Singlemode Fiber Optic Simplex Singlemode Plastic plex Singlemode Adapter
Adapter Fiber Optic Adapter Converter

Fiber Optic Attenuator

A Fiber Optic Attenuator is used reduce the power in a optical circuit. Available in 1310nm to
1550nm. The optical attenuator is a male to female configuration and connectorized with a FC, SC/APC,
ST, PC, LC, UPC, MU, FC/APC, SC, LC/APC ,fixed value plug type fiber optic attenuators, inline fiber op-
tic attenuators, variable fiber optic attenuators. Common attenuation values are 5dB, 10dB, 15dB and 20
dB but we stock all sizes from 1dB to 25db.

Singlemode Fixed Fiber Optic Attenuator, Male-Female, 1~30dB

LC/UPC SM/MM Fixed SC/UPC SM/MM Fixed Fiber Op- FC/UPC Singlemode Fixed
Fiber Optic Attenuator, tic Attenuator, Male-Female, Flanged Fiber Optic Attenu-
Male-Female, ator,

ST/APC Singlemode Fixed SC/APC Singlemode Fixed Fiber FC/APC Singlemode Fixed
Fiber Optic Attenuator, Optic Attenuator, Male-Female, Fiber Optic Attenuator, Male
Male-Female, -Female,

LC/UPC Singlemode Fixed SC/UPC Singlemode Fixed LC-LC Simplex Fiber Optic
Flanged Fiber Optic Attenu- Flanged Fiber Optic Attenuator, Attenuator
ator
43

CONSUMABLE AND TOOLS | CONNECTOR

FUSION SPLICE-ON CONNECTOR

Fusion Splice-on Connector is actually an optical fibre fusion, however the welding point is in the inner
end of connector, which makes it no necessary for extra protection equipment, such as fibre protection
plate (optical fibre splice tray), optical fibre terminal box, optical fibre distribution frame, after it
finished splice fusion. The factory pre-polished ferrule eliminates the need for polishing, adhesives, and
crimping in the field, which minimizes the potential for operator error and expensive connector scrap.
Compared to mechanical optical fast connector, this new practical connector save V-groove mechanical
connector maintenance and can improve the span life of welding point of connector and reduce
maintenance cost.

Fibrestore's Splicer-On Connector allows quick, easy, reliable and customizable permanent field
terminations without getting short, excess slack, and logistic delays of pre-terminated cables. It is also
ideal for central office, fibre hub/pedestal, and data center applications offering prompt extensions,
changes, repairs, and restoration for minimal downtime. It adjusts the length of fibres in the field, and
does not require to organize the fibres. It provides high quality of stable connectivity.

Features
Field-termination connector with no epoxy or polishing required No matching gel enables low reflection
and high reliability Splicing point is inside of the connector. No
additional splicing work required Easily assembled with one-
touch, push-pull system Used for φ3.0mm,φ2.0mm cable and
3x2mm drop cable etc. The fusion splice position can be protected
by the heat shrinkable tube inside, not easy broken100% qualified,
prolong use life, reduce the Maintenance cost The operator can
confirm if the splicing is successful by the monitor of fusion
splicing machine, to make it have more stability
Applications
− Fibre optic equipment
− Fibre optic communication system
− FTTH optic fibre terminal connection
− Optical access network Fibre optic data transmission
− CATV Central office connector replacement Data center installation

44

FIBER TOOLS | CLEAVER

SUMITOMO SUMITOMO CLEAVER (ori)

ORIGINAL SUMITOMO FC-6S FIBRE CLEAVER

Specification 63W x 65D x 63H (mm)
Dimensions 430g Without Scrap Collector; 475g With
Weight Scrap Collector
0.25mm - 0.9mm (Single)
Coating Diameter 0.125mm
Cladding Diameter 9mm - 16mm (Single Fibre - 0.25mm coating)
Cleave Length 10mm - 16mm (Single Fibre - 0.9mm coating)
0.5 Degrees
Typical Cleave Angle 36,000 Fibre Cleaves
Typical Blade Life 2
Number of Steps for
Cleave Rotational & Height
Blade Adjustments Optional
Automatic Scrap
Collection GW-800A HIGH PRECISION FIBRE CLEAVER

Description:
Grandway provides high precision optical fibre cleaver. It is used to

cleave fibre for mechanical or fusion splicing operation. Both full size

and mini fibre cleavers are available.

The full size fibre cleaver contains a great stability. It is a very reliable

cleaver for the construction of optical network and FTTx applications.

The mini fibre cleaver is much smaller than the full size cleaver. It

provides a great portability and precision of cleaving angle. Both types

of fibre cleavers contain 12-position blade. This could proceed with

36,000 times single fibre cleaves, or 3,000 times 12-fibre ribbon

cleaves. SUMITOMO 1 SUMITOMO CLEAVER (Cina)

Specifications Gw-1000 High precision cleaver
Fibre Type single fibre

Fibre Diameter 250um/900um

Bare Fibre Diameter 125um

Cleave Angle Capabilit typically <0.5˚ (single core) Features:
y

Cleave Length fibre diameter 250um/900um: 9~16mm/1 1. Compact design
Blade Lifetime 0~16mm
Blade Lifetime 2. High reliability
Dimension
Weight 36,000 fibre cleaves 3. Good cleaving perfor-

36,000 times fibre cleaves (3,000 times 12- 4. mance
fibre cleaves)
36,000 times cleave per
blade

60W*76D*57H (mm) 5. High stability and preci-

420g sion

45

FIBER TOOLS | SPLICE TOOL

JNDJIC375 FIBRE STRIPPER MODEL

Three hole Fibre Optic Stripper model performs all common
fibre stripping functions. The first hole of this Fibre Optic Strip-
per strips the 1.6-3 mm fibre jacket down to the 600-900 mi-
cron buffer coating. The second hole strips the 600-900 micron
buffer coating down to the 250 micron coating and the third
hole is used to strip the 250 micron cable down to the 125 mi-
cron glass fibre without nicks or scratches. Handle is made of
TPR (Thermoplastic Rubber).

Cut Type Strip

Cable Type Jacket, Buffer, Fibre Optic

Cable Diameter 125 micron, 250 micron, 900 micron, 1.6-
3.0 mm

Handle TPR (Thermoplastic Rubber)

Color Yellow Handle

Length 6" (152mm)

Weight 0.309 lbs

CST1900 ROUND CABLE CLUTTER

The CST-1900 is designed for fast and precise jacket removal of
PVC, rubber, PE and other jacket materials, and works well on
round cables with diameters ranging from 3/16" to 1-1/8" (4.5-
29 mm). This is a Triple Action Tool, cutting longitudinally for
end stripping, spiral for end stripping and mid-span cuts, and
circular for jacket removal. A simple versatile easy to use tool
your customers will love.

Cut Type Slit, Ring

Cable Type Jacket, Round Distribution

Cable Diameter 4.5-29.0 mm

FIB1020 MIDSPAN SLITTER

Features:
i. Compact design, light weight, portable
ii. 4 guide rails for tubes with different diameters
iii. Composed with high quality metal blades, more durable
iv. High precision rail design, ensure the integrality of the fibre

FISF1-017 BUFFER TUBE STRIPPER

Buffer Tube Slitter is especially designed for stripping the outer jacket

of a patchcord or a pigtail. It can slit loose tubes of ￠1.5mm~3.3mm
longitudinally. It has 4 rails on the body. Each rail is for the tube of
specified diameter so that the stripping precision can be improved.

FIS PA1510A KEVLAR CUTTER

Kevlar is widely used as a strength member in the patchcord and
pigtail to improve the tensility. Kevlar is a high tensile material, and
normal tools can hardly cut it. So, a special tool is very essential. GW-
09 Kevlar Scissors are specially designed for cutting this Kevlar
strength member.
Features:
i.Ergonomic design, comfortable for handling
ii.One micro-serrated blade reduces slippage for more positive
cutting action

46

FIBER TOOLS | SPLICE TOOL

KMS-K 1005 CABLE SHEATH CUTTER

KMS-K Longitudinal Cable Sheath Cutter is stored in handy
plastic case with wrench for 3mm cap screw removal. It is an
ideal tool in cable sheath slitting for both divided and un-
divided cables. Simply turn the center axis with thumb and fore-
finger. 4 positions are available for different cable sheath thick-
ness.

RCS-25 RATCHETING CABLE SLITTER

Slits and rings PVC, PE, rubber, and other cable jacket materi-
als. Will work on small cables as well as cables larger than
25mm. Designed with reversible double-ended replaceable
blade with adjustable cutting depth 0-5mm for each unique ca-
ble application. 10/20/30mm scaled on tool for slitting length
reference. For midspan or end cable slit and ring applications.

RIPLEY 1ACSD LONGITUDINAL, HORIZONTAL AND
SPIRAL CABLE SHEATH CUTTER

Longitudinal, Horizontal and Spiral Cable Sheath Cutter can cut
armored cable of 8mm~20mm in longitudinal, horizontal and
spiral directions.
Features:
i. Simple structure and operation
ii. All metal material and long lifetime

RIPLEY 1ACS FIBER STRIPPER MODEL

Tool slits outer polyethylene jacket & armor in one operation….
Performs longitudinal slitting & circumferential (ringing) for
end stripping
Blade rotates 90 degrees by activating blade lever, allowing easy
mid-span preparation (ringing and slitting)
Adjustable from 0.315” (8 mm) to 1.125” (28.6 mm) cable O.D.
Adjustable blade depths to accommodate different cable cover-
ings
“Roller” style cable follower provides cable stability & allows for
easier tool movement along the cable
Rugged anodized aluminium and steel construction

GW-119N DROP SLITTER

FTTH Drop Cable Stripper is used for stripping the outer jacket
of FTTH Drop Cable in FTTH (fibre to the home) before FTTH
Fast Field Assembly Fibre Optic Connectors are assembled.
Features:
i. Easy to use
ii. Improve installation efficiency
iii. Lightweight, durable and compact
iv. Simple jacket removing without fibre damaging
v. Universal stripper for all types of FTTH Drop Cable

T0112 SS CUTTER

Bearer wire stripping tools
We have successfully developed an easy-to-work tool, SS Cable
Cleaver for cleaving
SS cable into messenger wire and main cable for aerial
installation

GT-160A ROUND FIBER SLITTER

A special tool for stripping the cable is absolutely necessary.
With this special tool operator can sealed stripped of the sheath
without damaging any bare fiber inside.

47

CONSUMABLE AND TOOLS | SPLICE TOOL

FCC-300 FIBER CONNECTOR CLEANER

Applicable Connectors:
Simplex FC, SC, ST, LC and MU (For PC and APC)
Duplex LC/PC (Standard Pitch 6.25 and Narrow Pitch 5.25mm)
Duplex MU/PC (Standard Pitch width 4.5mm)

TL-330A FIBRE CUTTER

Cable Cutter for cutting cable up to 10.5 mm diameter, used
with high quality CNC ground fabricated blade for smooth
cutting of cables.
Features:
- Plastic coated, high-leverage handles for easier cuts
- Ideal tool for fibre optic cable installations

FT5508 FIBRE CRIMPING TOOL

Fibre optic connectors call for precision crimping which must
meet non-optical disconnect requirements and increased pull
strength demands. The FIS Crimp Tool is designed to
successfully assemble a variety of connector styles for maximum
optical performance and mechanical strength. The FIS Crimp
Tool, part number F1-3227, contains 4 crimp sizes; .128, .137,
.151 and .190

FIBTOOL1 SCRIBE

Pen type body durable blade
Suitable for any types of optical cable
Easy in use
Satisfied sense of holding
Designed to be portable

FIBTOOL12 THERMAL STRIPPER FOR 900µM

Softens and Strips 900µm Coatings.
Less than 1 lb. Pulling Force
Self-Aligning Blades for Precise Scoring and Nick Free Fiber
Excellent for Use on Delicate Fiber Optic Components
Battery Powered, Ideal for Field Use

FIBTOOL123 FTS FIBRE THERMAL STRIPPER

Very usefully device to strip coated fiber in FTTH
Hand-held type Thermal Stripper
Economic Price but High Strip-Quality
No Fiber Scratch/Crack after stripping
Safety Heating Controller
High Performance Stripping Structure
Available for Single Fiber and Ribbon Fiber

FISTO601 ALCOHOL DISPENSER BOTTLE

T’COM-ADB-250-B Alcohol Dispenser Bottle is designed to
dispense alcohol and applied with a swab or wipe to clean the
stripped and cleaved optical fibers.Used to dispense alcohol to
clean optical fibersIdeal for use in EPA and cleanroom
environments

FISTO602 DISPENSER BOTTLE (low cost)

T’COM-ADB-100-A, Alcohol Dispenser Bottles are designed to
dispense alcohol and applied with a swab or wipe to clean the
stripped and cleaved optical fibers.

48

CONSUMABLE AND TOOLS | CONSUMABLES

FT5604 ALCOHOL DISPENSER
T’COM-ADB-100-A, Alcohol Dispenser Bottles are designed to
dispense alcohol and applied with a swab or wipe to clean the
stripped and cleaved optical fibers.

F18265 PIANO WIRE
Our Fiber Optic Piano Wire provides you with an easy way to
save a fiber optic connector when an optical fiber breaks inside
the ferrule during connectorization. Fiber Optic Piano Wire also
enables you to remove broken optical fiber from bare fiber
adapters.

FT5602 PRESATURATED WIPE
CW-002 Fibre Optic Presaturated Wipes is with moderate
evaporation rate, ideal for cleaning fibre optics and fibre optic
connectors, cables, hard-line coax cable, cable splices, housing

F10401 1,25 MM CLEANING SWABS
To clean the end face of connectors already installed in patch
panels and hardware devices, you insert the cleaning swab into
the bulkhead adapter or receptacle, make the tip contact the
connector end face, make a single turn and then pull the stick
out and dispose. You should never reuse a stick.

F104012 2.5MM CLEANING SWABS
Cleaning Swabs use dry alcohol-free cloth; its stick-type shape
makes it a superb tool for cleaning connector ferrule end face
located in difficult spots inside the adaptors. One piece of stick
type cleaner can be used for four wipes for equipment
construction and one wipe for maintenance purpose. Two
models serve almost all types of connectors.

FT5600 ALCOHOL
Bottled Isopropyl Alcohol
99% Grade, our 28oz bottles.

FISF1-838C FIBER OPTIC DISPOSAL UNIT
A handy and safe solution for disposing of cleaved fiber ends.
Perfect for on-site installers. Snap-on cover has holes for
receiving fiber pieces or cover may be removed to expose plastic
catch webbing.

FISF1-838D MINI FIBER OPTIC DISPOSAL UNIT

A handy and safe solution for disposing of cleaved fiber ends.
Perfect for on-site installers. Snap-on cover has holes for
receiving fiber pieces or cover may be removed to expose plastic
catch webbing.

49

CONSUMABLE AND TOOLS | CONSUMABLES

FIS 34-155 KIM WIPE

Kimwipes, nearly lint free, soft and non-abrasive, are used to
clean the stripped and cleaved optical fibres and connector
endface by using alcohol from Alcohol Dispenser Bottle.

HUX3 REEL CLEAN

Over 500 wipes by one ReelClean500
Designed for most kinds of optical connectors
Compact size for Hand-held operating
Best Cleaning Effect by one time wipe
Cleaning Time Save

IBC9392c 2.5mm/1.25mm ONE-CLICK FERRULE
IBC9392d MATE CLEANER

Clean over 95% surface of fibre ferrule with only One Click
Super long lifetime, over 800 times cleaning

IBC9392e 2.5mm/1.25mm ONE-CLICK FERRULE
IBC9392f MATE CLEANER

Push type
Thin type to clean SFP on bottom of PCB direct
Both for Adapter / Bulkhead / Receptacle and Patchcord
Connector
800+ cleans per unit
Best Cleaning Effect

IBC939E FOC-MPO MPO/MTP PEN TYPE
CLEANER

T’COM provides high quality MPO/MTP Pen Type Cleaner for
MT optical ferrules.
The Pen Type Cleaner is absolutely your good partner in optical
cleaning solution.

FIS 1001 CRC - DUSTER™ AEROSOL DUST

CRC® Duster™ Cleaning Products with HFC chemical
compound removes dirt and dust from any surface
Does not damage sensitive components or surface finish
Non-flammable, no residue and non-abrasive
Safe on all plastics
Ideal for multi-purpose applications

FIS 1000 MICRO DUSTER

Before removing a fiber optic connector for inpection or
cleaning, make sure the area around the connector is free from
dust. The FIS Micro Duster includes an extension nozzle to
provide a powerful blast of air to remove particles from areas
that are otherwise inaccessible. Competitively priced

GTK-400 FIBER CLEANING TOOL KIT

FTTx cleaning tool bag are launched to bring all the necessary
tools together to assist field engineers to eliminate all the
possible obstacles it might happen on the field.

50