HT1500 Mud Flap Instructions - THE TRIKE SHOP

ROADSMITH

TRIKE CONVERSIONS BY

THE TRIKE SHOP

Please thoroughly review the instructions before and during installation. Keep in mind that
this product was designed to be installed by trained dealer technicians. If you are a do-it-
yourselfer, be patient, trust your common sense, and if necessary call your dealer or contact
The Trike Shop at 800-331-0705 if you run into any problems you cannot solve.

APPLICATION: Roadsmith HT1500 trike conversion
PRODUCT: BHU mud flap and bracket installation
VERSION: #2

GENERAL NOTES: Please don’t attempt any shortcuts.

Date Section Description of Change

9-15-10 BHU mud flaps

APPLICATION: Roadsmith HT1500 trike conversion
PRODUCT: BHU mud flap and bracket installation
VERSION: #2
GENERAL NOTES: Please don’t attempt any shortcuts.

1. Install the mud flaps on to the brackets (Pic #1)
a. If installing lighted flaps, refer to diagrams provided with them for wire routing and securing.
b. Install them so that the plug from the light is oriented toward the inside of the trike
c. Install the flaps on the rear side of the brackets

2. Remove and discard the two forward body mounting bolts from inside the trunk (Pic #2)
a. Save the washers and spacers
b. Replace these bolts with the provided 5/16” x 2-¼” bolts

3. Install the brackets with flaps onto the body mount tubes as shown using the provided hardware (Pic #3)