PONPE 324-C1 PONPE 324-O3
TI-G
A
MUL
MULTI-GAS DETECTOR SINGLE GAS DETECTOR à¤Ã×่ͧÇÑ´á¡Ê
S
OR
T
DETE
C
Precision level: IP65
à¤Ã×่ͧÇÑ´¤ÇÒÁ¢Ø‹¹áºº¾¡¾Ò Precision level: IP65
à¤Ã×่ͧÇÑ´¤ÇÒÁ¢Ø‹¹áºº¾¡¾Ò
Specifications Specifications
EX: 0-100%LEL O3: 0-20PPM
H2S: 0-100PPM Alarm Type: Sound, Light, Vibration curve display
CO: 0-1000PPM Sampling Method: Natural Di usion
O2: 0-30.0%VOL T&H: -10°C-55°C,<95%RH
NH3: 0-100PPM Sensor Life: 2 Years
CL2: 0-50PPM Display: 1.77 Inch LCD Display
Dimensions: 231x87x60mm T(90): <30S
Weight: 680g Working Time: 8 Hours
PONPE 419AQ PONPE 410AQ
CO2 & CO TEMP. & DATA LOGGER CO2 CONTOLLER à¤Ã×่ͧÇÑ´áÅФǺ¤ØÁ¡Ò«¤Òú͹ä´ÍÍ¡ä«´
à¤Ã×่ͧÇÑ´¡Ò«¤Òú͹ä´Í͡䫴ẺÊÑÁ¼ÑÊ
Working voltage: DC 3.7V (Lithium battery capacity 1800mAh)
Specifications Specifications
CO2 Range: 0~9999 ppm Display: 320x480 pixels
CO Range: 0~1000 ppm Operating temperature: 1 C~85 C
Air Temperature Range: -20~60°C , -5~140°F Co2 sensor type: Dual NDIR
Relative Humidity Range: 0~99.9% RH CO2 accuracy: @22 C(72 F)±40ppm+Display*2%
Dew Point Temp. (DP): -20~59.9°C CO2 Detective range: 0~9999ppm
Wet Bulb Temp. (WB): -5~59.9°C Displayed tempe Resolution: 0.1 C
LCD Size: 44(L) * 26(W) mm Displayed Co2 resolution: 1ppm
Meter Size: 205(L) * 70(W) * 56(H) mm Standby consumption: ≤0.5W
PONPE 400MB
Moisture Analyzer à¤Ã×่ͧÇÔà¤ÃÒÐˤÇÒÁª×้¹
Technical Parameters
PONPE 400MB-1 PONPE 400MB-2 PONPE 400MB-3 PONPE 400MB-4
Range 110g
Readability 0.01g 0.005g 0.002g 0.001g
Operating Temp. 5~35°C
Sensor Load Cell
Temp. Sensor PT100
Temp. Range 40~199°C
Temp. Step 1°C
Moisture Range 0.00~100.00%
Moisture Readability 0.1% 0.04% 0.01%
Timer 1~99min step 1s
Data Storage 15
PONPE 591DO PONPE 597
Dissolved Oxygen Controller Dissolved Oxygen Controller
Specification Specification
Range: 0-20mg/L,0-200%,0-400hPa Range: 0.01 electrode: 0.02ʙ20.00us/cm
Resolution: 0.01mg/L,0.1%,1hPa 0.1 electrode: 0.2ʙ200.0us/cm
Accuracy: ±1.5%FS 1.0 electrode: 2ʙ2000us/cm
Measuring range: Accuracy:±0.5°C 10.0 electrode: 0.02ʙ20ms/cm
Output Type 1: 4-20mA output Power supply: AC220V±10%, 50Hz/60Hz
Output Type 2: RS485 digital signal output DC24V±20%, Input power≥6W
Alarm relay: AC250V,3A Alarm relay: Pickup/Breakaway AC250V/3A
PONPE 592
PH/ORP CONTROLLER
Specification
Screen size: 2.8 inch LCD
Measure range: pH: 0-14 pH, ±0.02pH
ORP: -1000 ~1000mV, ±1mV
Input Resistance: ≥10~12Ω
Signal output: 4-20mA, maximum loop 750Ω, 0.2%FS
Power supply: AC220V±10%, 50Hz
Relay output: 250V, 3A
PONPE 510PD PONPE 511EC
Moisture Analyzer à¤Ã×่ͧÇÔà¤ÃÒÐˤÇÒÁª×้¹ PH/COND./SALT/DO METER COND./TDS /SALT METER
à¤Ã×่ͧÇÑ´PH/¤ÇÒÁ¹Óä¿¿‡Ò/¤ÇÒÁà¤็Á/ÍÍ¡«Ôਹ㹹ํ้Ò
à¤Ã×่ͧÇÑ´¤ÇÒÁ¹Óä¿¿‡Ò/TDS/¤ÇÒÁà¤็Á
Specifications Specifications
pH range: 2.00-12.00 Cond. range: 0-19.99, 0-199.9,0-1999uS/cm
Cond. range : 0-199.9, 0-1999uS/cm, 0-19.99, 0-150.0mS/cm 0-19.99,0-199.9mS/cm
TDS. Range : 0-199.9*f, 0-1999*f ppm, 0-19.99*f, 0-150.0*f ppt TDS range: 0-19.99,0-199.9,0-1999ppm
Salinity range : 0-10.00ppt;0-42.Oppt(SEA WATER) 0-19.99,0-199.9ppt
D.O.range : 0.0-199.9% (0.0-30.0mg/L) Salinity range : 0.0-70.Oppt(Naci)
Temp. range : -5-60.0°C Temp. range : 0-80.0°C
Dimension(mm) : 169(L)x78.3(W)x43.4(H) Dimension : 175(L)x70(W)x33(H)
Weight : 200g Weight : 150g
PONPE 513 PONPE 511PD
PH/COND./SALT/DO METER Series PH/COND./SALT/TDS/DO METER
à¤Ã×่ͧÇÑ´PH/¤ÇÒÁ¹Óä¿¿‡Ò/¤ÇÒÁà¤็Á/ÍÍ¡«Ôਹ㹹ํ้Ò à¤Ã×่ͧÇÑ´PH/¤ÇÒÁ¹Óä¿¿‡Ò/¤ÇÒÁà¤็Á/ÍÍ¡«Ôਹ㹹ํ้Ò
0.1 electrode: 0.2ʙ200.0us/cm
Specifications Specifications
pH Range: 2.00~12.00 pH Range: 2.00~12.00
Cond. Range: 0~199.9, 0~1999 us/cm Cond. Range: 0~199.9, 0~1999 us/cm
Screen size: 2.8 inch LCD 0~19.99, 0~150.0 ms/cm 0~19.99, 0~150.0 ms/cm
Measure range: pH: 0-14 pH, ±0.02pH TDS Measuring Range: 0~199.9*f, 0~1999*f ppm TDS Measuring Range: 0~199.9*f, 0~1999*f ppm
ORP: -1000 ~1000mV, ±1mV 0~19.99*f, 0~150.0*f ppt (f is TDS factor) 0~19.99*f, 0~150.0*f ppt (f is TDS factor)
Salinity Range: 0~10.00 ppt, 0~42.0 ppt (SEA Water) Salinity Range: 0~10.00 ppt, 0~42.0 ppt (SEA Water)
D.O. Range: 0.0~199.9% (0.0~30.0 mg/L) D.O. Range: 0.0~199.9% (0.0~30.0 mg/L)
Odering PONPE 513PH PONPE 513EC PONPE 513DO Odering PONPE 511PD-PH PONPE 511PD-EC PONPE 511PD-DO
PONPE 531DO PONPE 429TP
MUL TI-G A S DETE C T OR POCKET THERMOMETER
MULTI-GAS DETECTOR
à¤Ã×่ͧÇÑ´¤ÇÒÁ¢Ø‹¹áºº¾¡¾Ò à¤Ã×่ͧÇÑ´ÍسËÀÙÁÔ
Specifications Specifications
DO Range: 0~20.00mg/L O3: 0-20PPM
O2 Range: 0~200% Alarm Type: Sound, Light, Vibration curve display
Temp Range: 0~90.0 °C Sampling Method: Natural Di usion
0-19.99,0-199.9ppt ATC: 0~50 °C T&H: -10°C-55°C,<95%RH
MSC: 0~50 ppt Sensor Life: 2 Years
MAC: 0-20000 ft Display: 1.77 Inch LCD Display
Dimensions: Meter: 195 x 40 x 36 mm, Kits: 230 x 205 x 50 mm T(90): <30S
Weight: Meter: 135g(with battery), Kits: 780g Working Time: 8 Hours
PONPE 520PH
PROFESSIONAL PEN
TYPE PH METER
à¤Ã×่ͧÇÑ´¤Ø³ÀÒ¾¹ํ้ÒẺ»Ò¡¡Ò
Specifications
Display mode: LCD
Measurement range: 0.00-14.00ph
Accuracy: ±0.05 PH
Temperature compensation scope: 0 to 70°C
Power supply voltage: 2* AAA 1.5v battery
Working temperature: 0 to 50°C
Aquaculture water
Agricultural use survey
Working humidity:≤80%RH
quality
Weight: Approx. 156g/5.5oz
Weight: Approx. 156g/5.5oz
àÁ×่ͤ‹Ò PH µํ่Ò¡Ç‹Ò 3.5 PH áÅÐ
ÊÙ§¡Ç‹Ò 12.5 PH ¨ÍáÊ´§¼Å¨Ðᨌ§àµ×͹໚¹ÊÕá´§
Cosmetic Water quality
0~19.99, 0~150.0 ms/cm
0~19.99*f, 0~150.0*f ppt (f is TDS factor) Food acid-base Sewage treatment
PONPE 500CL PONPE 500CP
Free & Total Chlorine Meter Free & Total Chlorine Meter/pH Meter
à¤Ã×่ͧÇÑ´¤ÅÍÃÕ¹ à¤Ã×่ͧÇÑ´¤ÅÍÃÕ¹áÅÐ PH ã¹à¤Ã×่ͧà´ÕÂÇ
Specifications Specifications
Range: 0 ~ 3.50 ppm Range: 0 ~ 3.50 ppm
Resolution: 0.01 ppm Resolution: 0.01 ppm
Accuracy: ± 0.05 + 1 digit atʻ2.00 ppm pHRange: -2.00 ~ 16.00 pH
± 5% FS + 1 digit atʼ2.00 ppm ORP (Optional): Range: -1999 ~ -200 mV
Response: 5 seconds Temp.Range: 0 ~ 110 °C
Operating: 0 ~ 50 °C, 85% RH Power: DC1.5V x 4 AAA battery
Dimension: Meter: 42 x 33 x 183 mm Dimension: Meter Kits: 230 x 205 x 50 mm
Weight: Meter: 168 g(including battery) Weight: Meter Kits: 700g
PONPE 325 PONPE S300
ENDO
ENDOSCOPE
S
OPE
C
ALITY DETE
U
C
OR
T
AIR Q
AIR QUALITY DETECTOR ENDO S C OPE ¡ÅŒÍ§Ê‹Í§§Ù ¡ÅŒÍ§Ê‹Í§ÀÒÂã¹·‹Í
à¤Ã×่ͧÇÑ´¤Ø³ÀÒ¾ÍÒ¡ÒÈ
Temperature compensation scope: 0 to 70°C
Specifications HCHO PM1.0 PM2.5 PM10 TVOC Detector Specifications
Measuring range: 0-1.999MG /M3 (Formaldehyde) Monitor: Screen Type: 4.5” IPS HD display
0-9.999MG/M3(TVOC) Resolution: 845x480 pixel
Display mode: LCD screen display Image Capturing Resolution:1920x1080
Working principle : Electrostatic technology Camera: Diameter : 5.5mm or optional
Power: 5V (built-in rechargeable battery) Probe Length: optional
Input: AC100-240V 50/60HZ 0.15A Resolution: 1.0 Megapixel HD
Rated output voltage: 5V Light Source : 6 adjustable
Rated output current: 1A Other: LED Flash light : 1W CREE LED
PONPE 509TU JEDTO 2236B
PORTABLE TURBIDITY TACHOMETER
METER à¤Ã×่ͧÇÑ´¤ÇÒÁ¢Ø‹¹áºº¾¡¾Ò LASER 2 IN 1 à¤Ã×่ͧÇÑ´¤ÇÒÁàÃ็ÇÃͺ
Specifications Specifications
Measuring range: 1.00 -225.0mm Range:Photo Tach: 2.5~99,999RPM
Data storage: 500 Contact Tach: 0.5~19,999RPM
Probe selection:X Surface Speed: 0.05~1,999.9(m/min)
Operation frequency: 5MHz Resolution: Photo Tach: 2.5~999.99RPM,
Measurement error: ±(0.5%H+0.05)mm 1,000~9,999.9RPM
Lower limit of pipe measurement: 020x3mm (steel) Contact Tach: 0.5~999.99RPM,1,000~9,999.9RPM
Adjustment range of sound speed: 1000-9999m/s over 10,000RPM
Temperature range of operation: 0 -40°C Surface Speed: 0.05~99.99m/min, over 100m/min
PONPE 013SW PONPE 529BR
STOPWATCH ¹Ò�ԡҨѺàÇÅÒ REFRACTOMETER
à¤Ã×่ͧÇÑ´¤ÇÒÁËÇҹẺ´Ô¨ÔµÍÅ
Specifications
Material: plastic
Powered by: battery button (included)
Dimensions (L x W x H): 8.0x6.4x2.0 cm
Color: Black
Show hourly minutes, second AM / PM indicator
month info, and day of the week
You can select 12 or 24 hour users
This chronograph digital sports watch
Specifications
Range: 0-55% Brix
Temperature compensation: 10 °C ~ 40 °C
Ambient temperature: 10 °C ~ 40 °C
Fully charged: about 20,000 times
Resolution: Brix 0.1%
Accuracy: ±0.2% Brix / ±1 °C
Battery: 2x1.2V AA 2100mAh NiMH battery
Product size: 300g / 120x55x30mm
PONPE 421TK
DIGITAL THERMOMETER à¤Ã×่ͧÇÑ´ÍسËÀÙÁÔ
Technical Parameters
Temperature range: -200 ~ 1370 °C (-328 ~ 2498 °F)
Accuracy: ±(1%+1°C ); ±(1%+2°F )
Resolution:0.1 °C & 0.1 °F
Type of temperature measuring:K
Sampling rate:2.5times per second
Operating Temperature: 0 ~ 40 °C (32 ~ 104 °F)
Operating Humidity: 0 ~ 70 % (R.H.)
Input protection: 60V DC or 24V AC maximum input voltage on any combination input pins
Input connector: accept standard miniature thermocouple connectors
Battery: 4 x 1.5V AAA battery
Weight:205g( include battery)
Dimension:73x146x33mm
§Ò¹·Ñ่Çä» PONPE 423PR1 §Ò¹¾×้¹¼ÔÇ
Thermoconple Probe, Type K
ª‹Ç§¡ÒÃÇÑ´ÍسËÀÙÁÔ ÊÙ§ÊØ´ ~500°C ª‹Ç§¡ÒÃÇÑ´ÍسËÀÙÁÔ ÊÙ§ÊØ´ ~500°C
¤ÇÒÁáÁ‹¹ÂÓ ±1.5 °C ¤ÇÒÁáÁ‹¹ÂÓ ±1.5 °C
¤ÇÒÁÂÒÇâ¾Ãº 150 ÁÁ 3 ÁÁ ´ŒÒÁ¨Ñº 110 ÁÁ ¤ÇÒÁÂÒÇâ¾Ãº 130 ÁÁ 15 ÁÁ ËÑÇÇÑ´ 15 ÁÁ
â¾Ãº·Ó¨Ò¡ÇÑÊ´ØÊáµ¹àÅÊ â¾Ãº·Ó¨Ò¡ÇÑÊ´ØÊáµ¹àÅÊ
ÊÒÂâ¾Ãºáºº¢´Ê»ÃÔ§Â×´ä´ŒÊÙ§ÊØ´ 2 àÁµÃ ÊÒÂâ¾Ãºáºº¢´Ê»ÃÔ§Â×´ä´ŒÊÙ§ÊØ´ 2 àÁµÃ
ËÑǵ‹ÍẺª¹Ô´ K 㪌§Ò¹¡Ñº thermometer ä´Œ·ÑèÇä» ËÑǵ‹ÍẺª¹Ô´ K 㪌§Ò¹¡Ñº thermometer ä´Œ·ÑèÇä»
PONPE 423PR2 §Ò¹¾×้¹¼ÔÇ PONPE 423PR3 §Ò¹¾×้¹¼ÔÇ
Thermoconple Probe, Type K Thermoconple Probe, Type K
ª‹Ç§¡ÒÃÇÑ´ÍسËÀÙÁÔ ÊÙ§ÊØ´ ~500°C ª‹Ç§¡ÒÃÇÑ´ÍسËÀÙÁÔ ÊÙ§ÊØ´ ~500°C
¤ÇÒÁáÁ‹¹ÂÓ ±1.5 °C ¤ÇÒÁáÁ‹¹ÂÓ ±1.5 °C
¤ÇÒÁÂÒÇâ¾Ãº 130 ÁÁ 6 ÁÁ ´ŒÒÁ¨Ñº 130 ÁÁ ËÑÇÇÑ´ 15 ÁÁ ¤ÇÒÁÂÒÇâ¾Ãº 150 ÁÁ 6 ÁÁ ´ŒÒÁ¨Ñº 130 ÁÁ ËÑÇÇÑ´ 15 ÁÁ
â¾Ãº·Ó¨Ò¡ÇÑÊ´ØÊáµ¹àÅÊ â¾Ãº·Ó¨Ò¡ÇÑÊ´ØÊáµ¹àÅÊ
ÊÒÂâ¾Ãºáºº¢´Ê»ÃÔ§Â×´ä´ŒÊÙ§ÊØ´ 2 àÁµÃ ÊÒÂâ¾Ãºáºº¢´Ê»ÃÔ§Â×´ä´ŒÊÙ§ÊØ´ 2 àÁµÃ
ËÑǵ‹ÍẺª¹Ô´ K 㪌§Ò¹¡Ñº thermometer ä´Œ·ÑèÇä» ËÑǵ‹ÍẺª¹Ô´ K 㪌§Ò¹¡Ñº thermometer ä´Œ·ÑèÇä»
PONPE 449SD *¾ÃŒÍÁâ¾ÃºÇÑ´
4 CHANNEL à¤Ã×่ͧÇÑ´áÅкѹ·Ö¡ÍسËÀÙÁÔ 4 ª‹Í§
K THERMOCOUPLE & THERMISTOR
• Super big LCD portable/wallmount SD card logger
Features • Measure temperature via K Type thermocouple
• 4 Channel K Type thermocouple to use at once
• Unlimited manual memories in SD card
• Unlimited autologging memories in SD card
• HOLD function freezes current readings
• Checking MAX/MIN value from power on
• Beeper and LED alarm are both available
• One button press to display T1-T2
• Programmable temperature HIGH/LOW alarm limit
• Blue backlight function works in dark area
Specifications
K Temp. Range: -200 to 1370°C, -328 to 2498°F
K Temp. Resolution: 0.1°C, 0.1°F
K Temp. Accuracy (under 18 to 28°C ambient temp.): ±(0.3% rdg +1°C)
Sampling Rate: Programmable from 1 second up
LCD Size (H×W): 47×104mm
Operating Temp.: 0 to 50°C
Operating RH%: Humidity < 80%RH
Storage Temp.: -20 to 50°C
Storage RH%: Humidity < 90%RH
Dimension (L×W×T): 152×100×39mm
PONPE 220AN PONPE 229AN
DIGITAL ANEMOMETER INTELLIGENT SENSOR
à¤Ã×่ͧÇÑ´¤ÇÒÁàÃ็ÇÅÁ METER à¤Ã×่ͧÇÑ´¤ÇÒÁàÃ็ÇÅÁ
Specifications
Range of Air velocity: 0 - 45 m/s, 0 - 8800 Ft/Min,
0 - 88 Knots, 0 - 140 Km/Hr, 0 - 88 Mph
Accuracy of Air velocity: ±3%
Range of Air temperature: 0-45 °C (32-113 °F)
Accuracy of Air temperature: ±2 C (3.6 °F)
Resolution of Air velocity: 0.1m/s, 0.2°C
Battery: 1x9 V Battery (not included) Specifications
Operating temperature: -10-45 °C (14-113 °F) Display: LED Display
Operating humidity: Less than 90%RH Input: 0-75mv/4-20ma/0-10v
Output: 4-20ma
Store temperature: -40 ~+60 (-40 °F~140 °F)
Dimension: Meter: 148*76*37mm Alarm: Two relay alarm
Vane: 172*65*20mm Power Supply: 90-265V AC/D
Auxiliary Power: 24V DC
Communication: RS232 or RS485 Modbus RTU
Sampling rate: ≤ 8 times/second
Consumption: ʻ 3W
Accuracy: 0.3%F.S 2dgt
PONPE 210VB
VIBRATION à¤Ã×่ͧÇÑ´áçÊÑ่¹ÊÐà·×͹
METER
1.Simple to use, the structure is compact, portable for
Features carrying along with measurement.
2.Visually display measurement value and state.
3.Acceleration, velocity and displacement measurement.
4.Different vibration frequency selection.
5.High sensitivity probe for accurate measurement
Provides long and short probe head ,each one is suitable
for different situation measurement.
6.Equipped with AC signal output interface.
7.Low power indication.
8.Auto power-off.
9.LCD backlight.
Specifications
Range of acceleration: 0.1~199.9m/s² peak
Range of velocity: 0.1~199.9mm/s rms
Range of displacement: 0.001~1.999mm p-p
Velocity and displacement range is limited by 2 acceleration199.9m/s²
LCD Size (H×W): 47×104mm
Measurement accuracy: ±5%±2digits
Frequency range of acceleration: 10Hzʙ1KHz (LO) 1KHzʙ15KHz (HI)
Frequency range of velocity: 10Hzʙ1KHz (LO)
Frequency range of displacement: 10Hzʙ1KHz (LO)
Dimension (L×W×T): 67x30x183mm
PONPE 211VB
VIBRATION à¤Ã×่ͧÇÑ´áçÊÑ่¹ÊÐà·×͹
METER
1. Full display.
Features 2. Screen flipping.
3. Store and view files.
4. Power indicator.
5. Double measurement button.
6. Flashlight.
7. Screen brightness.
8. Select Chinese/English.
9. Shutdown time setting; Machinery grade.
Specifications
Measurement range: Accelerationɿ0.1~199.9m/s2
Velocityɿ0.1~199.9mm/s
Displacementɿ0.001~1.999mm
Measurement accuracy: Vibration displacementɿ0.01~0.02mm,
≤±10%. ≥0.02mm,≤±5%
Vibration velocityɿ0~2.0mm/s, ≤±10%.≥2.0mm/s,≤±5%
Vibration accelerationɿ0~2.0m/s2,≤±10%.≥2.0m/s2,≤±5%
High frequency: 1KHzʙ15KHz (HI)
Low frequencyɿ20Hzʙ1KHz ( LO)
Shuffle interval of data display: 1 second
Maximum groups of data storage: 7 groups
Power supply: 1.5V AAA battery*2
Humidity range for operation: 30~90%RH
Dimension (L×W×T): 180x54x30mm
PROTRONICS CO.,LTD.
9 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
pH test strip กระดาษลิตมัส
PONPE 014FIX PONPE 610FIX
Specifications Specifications
pH Test Strip : 0-14 pH pH Test Strip : 6.0-10.0 pH
Boxed: 100 pieces Boxed: 100 pieces
Resolution: 0-1-2-3-4-5-6-7-8-9-10-11-12-13-14 Resolution: 6.0-6.5-7.0-7.5-8.0-8.5-9.0-9.5-10.0
PH-FIX 6.0-7.7 PH-FIX 7.9-9.8
Specifications Specifications
pH Test Strip : 6.0-7.7 pH pH Test Strip: 7.9-9.8 pH
Boxed: 100 pieces Boxed: 100 pieces
Resolution: 6.0-6.4-6.7-7.0-7.3-7.7 Resolution: 7.9-8.3-8.6-8.9-9.1-9.4-9.8
Brilliant colours for exact results Patented technology for optimal sample protection
pH-Fix test strips feature up to four different indicator pads to cover the complete pH-range. In the production the indicator reacts with the paper of the test pad to form a chemical bond.
The color chart exactly matches both color and position of the pads on the strips. This enables The dye is fixed to the test strip and can not bleed into the sample. This protects the sample
highly precise pH-determination and makes the application rapid and reliable. against contamination and enables measurements in weakly buffered or strongly alkaline
solutions.
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ กระดาษลิตมัส
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
10 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Conductivity meter เครื่องวัดความนำไฟฟ�า
ET-01 EC-3 EC-3M
Specifications Specifications Specifications
Measurement range: TDS: 0-9990 ppm EC Range: 0 – 9990 µS (µS/cm) EC Range: 0 – 9.99 mS (mS/cm)
Conductivity:0 - 9999us/cm Temp. Range: 0 – 80 °C Temp. Range: 0 – 80°C
Degrees Celsius: 0.1 - 80.0°C , 32.0 - 176.0°F Resolution: 0-999: 1 µS; 1000-9990: 10 µS Resolution: 0-9.99: 0.001 mS; 1-9.99: 0.01 mS
Accuracy: ± 2% Temp Resolution: 0.1°C / 0.1°F Temperature Resolution: 0.1°C
Weight : 55g Accuracy: ±2°C Accuracy: ±2%
Size: 154*30*14(mm) ATC: Built-in sensor 1 ~ 50°C ATC: Built-in sensor 1 ~ 50°C
Power source: 2 x 1.5V button cell batteries Memory: 15 readings
Battery life: 1000 hours of usage Power source: 2 x 1.5V button cell batteries
Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches) Battery life: 1000 hours of usage
Weight with case: 76.5g (2.7 oz) Dimensions: 15.5 x 3.1 x 2.3cm
Weight without case: 56.7g (2 oz) Weight with case: 76.5g (2.7 oz)
Weight without case: 56.7g (2 oz)
EC100 EC150 EC400
Specifications Specifications Specifications
Conductivity ranges: 0 to 1999μS/cm Conductivity ranges: 0 to 1999μS/cm Conductivity:0 to 199.9µS, 200 to 1999µS,
0 to 19.99mS/cm 19.99mS/cm 2.00 to 19.99mS
Conductivity max. resolution: 1μS/cm Conductivity max. resolution: 1μS/cm TDS/Salinity/Fluoride: 0 to 99.9ppm (mg/L),
0.01mS/cm 0.01mS/cm 100 to 999ppm (mg/L),
Conductivity basic accuracy: ±1% FS Conductivity basic accuracy: ±1% FS 1.00 to 9.99ppt (g/L)
Temparature ranges: 32° to 122°F (0 to 50°C) TDS Ranges: 0 to 1999ppm and 0 to 1999ppm Temperature: 32° to 149°F (0 to 65°C)
Temperature max. resolution: 0.1°F/°C TDS max. resolution: 1ppm and 0.01ppt Max. Resolution: 0.1µS, 0.1ppm (mg/L),
Temperature basic accuracy: 0.1°F/°C TDS basic accuracy: ±1% FS 0.01pH, 0.1°F/°C
Power: Four LR44 button batteries Temparature ranges: 0 to 50°C(32° to 122°F) Basic Accuracy:±2%FS, ±0.01pH, ±1.8°F/1°C
Dimensions: 6.5 x 1.4 x 1.3" (165 x 35 x 32mm) Temperature max. resolution: 0.1°F/°C Dimensions: 1.4x6.8x1.6" (35.6x172.7x40.6mm)
Weight: 3.8oz (110g) Temperature basic accuracy: 0.1°F/°C Weight:3.8oz (110g)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
11 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
CON900 COM-100
Specifications Specifications
Conductivity Range: 0.00~19.99μS/cm; 20.0~199.9μS/cm; EC Range: 0 - 9990 µS
200~1999μS/cm; 2.00~19.99mS/cm;20.0~199.9mS/cm TDS Range: 0-9990 ppm (mg/L)
TDS: 0~100g/L Temperature Range: 0-80 ºC; 32-176 ºF
Salinity: 0~100ppt Resolution: 0-99: 0.1 µS/ppm
Resistivity: 0~100MΩ·cm 100-999: 1 µS/ppm
Temp: 0~100ºC 1000-9990: 10 µS/ppm
Resolution: 0.01/0.1/1μS/cm; 0.01/0.1mS/cm Temp. resolution: 0.1 ºC/F
Accuracy: Meter:±1.0% FS, meter with electrode:±1.5% FS Accuracy: ± 2%
ATC: 0 ~ 50ºC EC to TDS Conversion Factor: Non-linear conversions for KCl,
Electrode constant: 0.1/1/10cm- 442TM or NaCl solutions, set by the user
Data storage: 100groups Calibration: Digital calibration by push button
Environmental Humidity: ≤85% Probe: Detachable platinum electrodes
COM-80 AP-2 EC210
Specifications Specifications Specifications
EC Range: 0 – 9990 µS; 0 – 9.9 mS EC Range: 0-9999 µS (µS/cm) Conductivity: 2000µS/cm, 20mS/cm, 100mS/cm
TDS Range: 0 – 5000 ppm (0.5 Scale) Temperature Range: 0-80 °C; 32-176 °F TDS/Salinity: 1200ppm, 12,000ppm, 66,000ppm
0-8560 ppm (0.7 Scale) Resolution: 1 µS; Temp. resolution is 0.1 °C/F Temperature: 32 to 122°F (0 to 50°C)
Temperature Range: 1-80 °C; 33-176 °F Accuracy: ± 2% Max. Resolution: 1µS/cm, 0.01mS/cm, 0.1mS/cm,
Resolution: 1 µS/ppm; 0.1 mS Calibration: Digital calibration by push button 1ppm,10ppm, 100ppm, 0.1°F/°C
Temp. Resolution: 0.1 °C/F Battery: 9V Basic Accuracy: ±2% FS, ±1.5°F/0.8°C
Accuracy: ± 2% Housing: Water-resistant Dimensions: Meter: 5.3 x 2.4 x 1.3"
Power source: 3 x 1.5V button cell batteries Power source: 1 x 3V button cell Weight: 10.4oz (295g) includes probe and battery
Dimensions: 15.3 x 3.2 x 1.8 cm Dimensions: 15 x 2.8 x 1.3 cm: Weight: 42.5 g
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
12 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
PS-50S PSC-154
Specifications Specifications
Range: 0-9999 ppm (mg/L); 0-10.0 ppt (g/L) EC Range: 0-9999 µS
EC: 0-9999 µS; 0-20.00 mS TDS Range: 0 - 5000 ppm
Accuracy: ± 2% Temperature Range: 1-75°C; 33-167 °F
Resolution: 0-99.9: 0.1 ppm/µS; 100-9999: 1 ppm/µS; 0.1 ppt/mS Accuracy: ±2% (of the reading)
ATC: Yes (1 – 65˚C) Conversion Factor: NaCl (avg. 0.5)
Calibration: Digital to any point Resolution: 0.1 µS/ppm (0-999); 1 µS/ppm (1000-9999)
Set Point: On-screen buttons ATC: Yes (1 - 65°C)
Relay Control: Simple switch, user-defined set point Calibration: Digital by push button
Alarm: Optional setting Relay Voltage: 5V
Display: 2.3” LCD Display w/ backlight Output Signal: Digital 4-20mA
Probes: 1/2” NPTF, 3 m (9.8 ft.) cable Output Accuracy (mA): ±1%
Power Source: AC 110V / 220V Power supply: AC 110V / AC 220V
Dimensions: 9.6 x 4.8 x 10 cm / Weight: 235g (8.3lbs.) Alarm: Optional steady beep (set by user)
CCT-3320V CCT-5320E
Specifications Specifications
Measurement range: 0 ~ 20 ~ 200 0 ~ 0 2000μS/cm Conductivity cell model: CON1134-13
Accuracy: 1.5% (FS) Power supply: AC 220±10%
Accuracy: ± 2% Conductivity Cell constant: 1.000ʢcm- ʣ
STAbility: ± 2 × 10-3 (FS)/24 h Measurement Range: Conductivity: (1.0~2000) µS/cm
Auxiliary electrode: Plastic structure; constant: 1.0 cm-1 TDS: 0.25ppm~1000ppm
Temperature compensation component: NTC Temp.: 0~50°C
Medium temperature: 5 ~ 50 °C Resolution: Conductivity: 0.01μS /cm;0.01mS/cm
Thread dimension: 1/2” pipe thread TDS: 0.01ppm
Medium pressure: 0 ~ 0.5 Mpa Temp.: 0.1°C
Cable composition: Quad cable, copper mesh and foil shielded plastic jacket Accuracy: Conductivity: 1.5%ʢFSʣ
Cable length: 5 m or on other agreement (5 ~ 30 m) TDS: 1.5%ʢFSʣ
Temperature compensation: Automatic compensation, with 25 as Temp.: ±0.5°C
the reference temperature Temp.compensation range: 0~50°C
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
13 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
PONPE 596
Features
-Intelligent online Monitoring and control of
EC, TDS levels.
-Large, bright LCD display with backlight,
easily and clearly read.
-the upper limit, lower limit alarm relay control
function, alarm ON\OFF.
-Installs easily in minutes.
-Widely used in various water quality treatment
equipment on-line monitoring and control.
Option («×éÍà¾ÔèÁ) Ãкº line alert
Specifications
EC Range: 0.0-9999us/0.0-20.0Ms
TDS Range: 0.0-9999ppm/0.0-10.0ppt
Resolution: uS&ppm:0.1(0.0-99.9);1(100-9999); ms&ppt(0.1)
Accuracy: ±2%
Temperature Compensation: ATC(1-65°C)
Working Condition: temp. -5°C~50°C, humidity≤85%
PONPE 595
Model PONPE 595-L PONPE 595-L
(0.5~20.000) mS/cm,
Conductivity (0.5~2,000) uS/cm
Measurement (0.5~20,000) uS/cm
range TDS 0.5ppm~1,000ppm 250ppm~10,000ppm
Temp 0~50°C (Temp.compensation component: NTC10K)
Conductivity 1μS /cm; 0.01mS/cm
Resolution TDS 0.01ppm
Temp 0.1°C
Conductivity 1.5% (FS)
Accuracy TDS 1.5% (FS)
Temp ±0.5°C
Temp.compensation range (0~50) °C (with25°C as standard)
PONPE 595-H
PONPE 595-L
Option («×éÍà¾ÔèÁ) Ãкº line alert
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
14 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
PONPE 593HD
Measurement Conductivity 0~9999uS/cm / 0~20.00mS/cm
range TDS 0~9999ppm(mg/L) / 0~10.00ppt(g/L)
Conductivity 0.1uS (0.0~99.9uS/cm); 1uS (100~9999uS/cm); 0.01mS/cm
Resolution
TDS 0.1ppm (0.0~99.9ppm); 1ppm (100~9999ppm); 0.01ppt
Conductivity ±1.5% (FS)
Accuracy
TDS ±1.5% (FS)
Temp.compensation range 1~60°C
Chanel Single sensor (1/2" NPTF bushing)
Control
contacts Relay 1 Point relay setting. Trigger relay when detects exceed value
MODEL PONPE 594HD1 PONPE 594HD2
Model
Conductivity 0.5~20.000 mS/cm (20,000 µS/cm)
Measurement TDS 0.25ppm~10,000ppm
range
Temp 0~50°C (Temp. compensation component : NTC10K)
1μS /cm; 0.01mS/cm
Conductivity
Resolution TDS 0.01ppm
Temp 0.1°C
Conductivity 1.5% (FS)
Accuracy TDS 1.5% (FS)
±0.5°C
Temp
Optional
Temp.compensation range (0~50) °C (with25°C as standard)
Option («×éÍà¾ÔèÁ) Ãкº line alert
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
15 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
DO Meter เครื่องวัดออกซิเจน ในน้ำ
DO900-P2 DM2800
Specifications Specifications
Dissolved Oxygen range: (0 ~ 40.00)mg/L(ppm); (0 ~ 200.0)% Measure range : 0-20mg/L,0-200%,0-400hPa
Resolution: 0.1/0.01mg/L(ppm) 1/0.1% Resolution : 0.01mg/L,0.1%,1hPa
Accuracy: Meter : ±0.10mg/L; Overall : ±0.40mg/L Accuracy : ±1.5%FS
Residual current: <0.1mg/L Temperature Type : NTC 10k/PT1000
Temp. compensation range:(0 ~ 45)°C (automatic) Auto A/manual H : -10-60°C Resolution; 0.1°C Correction
Salinity compensation range: (0 ~ 45)ppt (automatic) Measuring range : Accuracy:±0.5°C
Atmospheric pressure compensation range: (66 ~ 200)kPA (manual) Output Type 1 : 4-20mA output
Automatic calibration: Air saturated by water; water saturated by air Max.loop resistance : 750Ω
Electrode type: Polarogram type Repeatblitiy : ±0.5%FS
Data storage: 200 groups Output Type 2 : RS485 digital signal output
Environment temperature:5 ~ 35°C (0.01grade) Power supply : AC220V±10%50Hz/60Hz(optional 24V±10%ʣ
Environmental humidity: <85% Alarm relay : AC250V,3A
AMT07 AMT08 DO600
Specifications Specifications Specifications
DO: 0~20.00mg/L; O2: 0~200%; Temp.: 0~90.0°C Range: 0.0~19.9mg/L DO (saturation mode): Range: 0 to 200.0%
Accuracy: DO: ±0.2; O2: ±2% FS; Temp.: ±0.2 Resolution: 0.1mg/L Max. Resolution: 0.1%
Resolution: DO: 0.01; O2: 0.1; Temp.: 0.1 Accuracy: ±0.5mg/L Basic Accuracy: ±2% FS
ATC: 0~50°C Temp.: 0.0~99.9°C (concentration mode): 0 to 20.00ppm (mg/L)
MSC: 0~50 ppt Temp. Resolution: 0.1°C Max. Resolution:0.01ppm (mg/L)
MAC: 0-20000 ft Temp. Accuracy: ±0.5°C Basic Accuracy: 0.4ppm (mg/L)
Dimensions: Meter: 195 x 40 x 36 mm, ATC: 5~45°C Temperature: 32 to 122°F (0 to 50°C)
Power source: 3 x 1.5V button cell batteries Auto Off: After 10 minutes Max. Resolution: 0.1°F/°C
Kits: 230 x 205 x 50 mm Power: 4 x 1.5V Button Cell Basic Accuracy: ±1.8°F (1°C)
Weight: Meter: 135g(with battery) Size: 170*37*37mm Dimensions/Wt: 1.4x6.9x1.6" (36x176x41mm)
Kits: 780g Weight: 90g Weight: 3.8oz (110g)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดออกซิเจน ในน้ำ
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
16 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
MW600 SDL150
Specifications
Dissolved Oxygen Range: 0 to 20.0 mg/L
Specifications Oxygen: 0 to 100.0%
O2 Range: 0.0 to 19.9 mg/l Temperature Range: 32 to 122°F (0 to 50°C)
O2 resolution: 0.1 mg/l Accuracy: ±0.4 mg/L
O2 Accuracy: ±1.5% Full Scale Oxygen: ±0.7%
Calibration: manual on 2 points (zero and slope) Temperature Range: ±0.8°C/1.5°F
Temperature Compensation: automatic, from 0 to 30°C Probe Compensation & Adjustment: Salt: 0 to 50%
Probe: MA840 (included) Oxygen: Altitude: 0 to 8910m
Environment: 0 to 50°C / 32 to 122°F; max RH 95% Temperature Range: 0 to 50°C
Battery Type: 1 x 9V alkaline (included) Datalogging: 99 data (manual)/20M data (4G SD card)
Battery Life: approx. 70 hours of continuous use Dimensions/Weight: Meter: 7.2x2.9x1.9" (182x73x48mm)/ 25.6oz(725g)
Dimensions: 145 x 80 x 40 mm Probe: 0.8Dx4.9"L
Weight: 220 g (with battery)
DO210 AR8210
Specifications Specifications
Dissolved Oxygen Range: 0 to 20.0 mg/L Dissolved oxygen measurement range: 0.00~20.00mg/L
Oxygen: 0 to 100.0% Resolution: 0.1mg/L
Temperature: 32 to 122°F (0 to 50°C) Accuracy: ±0.4mg/L
Basic Accuracy: ±0.4 mg/L Measurement response time: <30s
Oxygen: ±0.7% Working environment temperature: 0°C ~ 40°C
Temperature: ± 1.5°F (±0.8°C) The measured dissolved oxygen temperature range: 0°C ~ 40°C
ATC: 32 to 122°F (0 to 50°C) Working environment humidity: ≤85% RH
Probe Compensation & Adjustment Battery: Lithium battery chargable
Salt: 0 to 39%Altitude: 0 to 3900m The basic error of dissolved oxygen measurement is 0.4mg/L
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
17 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
HI3810
Specifications
Proper dissolved oxygen levels are
essential for aquatic ecosystems. A dissolved
oxygen level of 5 mg/L or greater
will support healthy growth of most
fish species. Other applications include
monitoring in wastewater treatment and
heating plants.
HANNA instruments®’ HI 3810 test kit
uses an adaptation of the Winkler
method to determine dissolved oxygen
level.
DO603
Features
• Includes 6 screw on membrane caps, 15mL filling
solution and polishing paper
• Compatible with Dissolved Oxygen sensor
(DO605) of DO600 meter
Specifications
DO (saturation mode): 0 to 200.0%
Max Resolution: 0.10%
Basic Accuracy: ±2% FS
DO (concentration mode): 0 to 20.00ppm (mg/L)
Max Resolution: 0.01ppm (mg/L)
Basic Accuracy: 0.4ppm (mg/L)
Temperature: 32 to 122°F (0 to 50°C)
MA841
Details
The Milwaukee MA841 is a package of spare
membranes for SM600 (5 Membranes & "O"
rings per package)
Product Features
* Spare membranes
* Made for the Mi605, SM600 and MW600
* 5 membranes and "O" rings
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความนำไฟฟ�า
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
18 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Chlorine Meter เครื่องวัดคลอรีน
90709 CL200 EX800
The white paper turns blue-violet in the Specifications Specifications
presence of Cl2. The test is particularly suitable Chlorine (ppm): 0.01 to 10.00ppm pH: 0.00 to 14.00pH
for high range applications in disinfectant Temperature: 23° to 194°F (-5 to 90°C) Chlorine (ppm): 0.01 to 10.00ppm
solutions which are for example used in food Max Resolution: 0.01ppm; 0.1°F/°C; Temperature: 23° to 194°F (-5 to 90°C)
and beverage industry and animal farms.
Basic Accuracy: ±10% of reading ±0.01ppm; Max Resolution: 0.01pH, 1mV, 0.01ppm, 0.1°
Specifications ±1.8°F/±1°C Basic Accuracy: ±0.01pH, ±4mV, ±10% of reading
Type: test paper Memory: 15 readings ±0.01ppm; ±1.8°F/±1°C
Presentation: reel of 5 m length and 10 mm width Dimensions: 1.4x6.8x1.6" (35.6x172.7x40.6mm) Memory: 15 readings
Colour reaction: white -> dark blue Weight: 3.85oz (110g) Dimensions: Meter: 1.4x6.8x1.6"
Gradation: 10–50–100–200 mg/l Cl • Direct reading of Total Chlorine provides fast Weight: 3.85oz (110g)
Reference: 90709
and easy measurements (less than 2 minutes) 3-in-1 Water Quality Meter measures Chlorine,
• Low detection limit down to 0.01ppm pH plus Temperature with interchangeable flat
surface electrodes (included)
EX900 MI524-25 MI526-25
Specifications Specifications Specifications
pH: 0.00 to 14.00pH Total Chlorine reagent replacement kit Free Chlorine reagent replacement kit
ORP (mV): -999 to 999mV Contains 25 sachets Contains 25 sachets
Chlorine (ppm): 0.01 to 10.00ppm For laboratory and industrial use For laboratory and industrial use
Temperature: 23° to 194°F (-5 to 90°C) For use with MW11 mini photometer For use with the MW10 mini photometer
Max Resolution: 0.01pH, 1mV, 0.01ppm, 0.1°
Basic Accuracy: ±0.01pH, ±4mV, ±10% of reading
±0.01ppm; ±1.8°F/±1°C
Memory: 15 readings
Dimensions: Meter: 1.4x6.8x1.6"
Weight: 3.85oz (110g)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดคลอรีน
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
19 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Specifications
Free Chlorine Range: 0.00 to 5.00 mg/L Cl2
Total Chlorine Range: 0.00 to 5.00 mg/l Cl2
Free Chlorine Resolution: 0.01 mg/l (0.00 to 3.50 mg/l);
0.10 mg/l (above 3.50 mg/l)
Total Chlorine Resolution: 0.01 mg/l (0.00 to 3.50 mg/l);
0.10 mg/l (above 3.50 mg/l)
Free Chlorine Accuracy: ±0.04 mg/l @1.50 mg/l
Auto-off
Total Chlorine Accuracy: ±0.04 mg/l @1.50 mg/l
Method: adaptation of the USEPA method 330.5
Standard Method 4500-Cl G
Light Detector: silicon photocell and 525 nm narrow band interference filter
Environment: 0 to 50°C / 32 to 122°F; max RH 100%
Battery Type: 1 x 9V (included)
Auto-off: after 10 minutes of non-use
Dimensions: 192 x 104 x 52 mm
Weight: 380 g
MW10 MW11 CL500
Specifications Specifications Specifications
Range: 0.00 to 2.50 ppm Range: 0.0~19.9mg/L Range (ppm): 0.01 to 3.50ppm
Resolution: 0.01 ppm Resolution: 0.1mg/L Resolution: 0.01ppm
Accuracy: ±0.03 ppm ±3% of reading @ 25 °C Accuracy: ±0.5mg/L Accuracy: ±0.02ppm @ 1ppm
Typical EMC Dev.: ±0.01 ppm Temp.: 0.0~99.9°C Light source: LED, 525nm
Light Source: Light Emitting Diode @ 525 nm Temp. Resolution: 0.1°C Response Time: <10 seconds
Light Detector: Silicon Photocell Temp. Accuracy: ±0.5°C Dimensions: 6.1 x 3.0 x 2.4" (155 x 76 x 62mm)
Environment: 0 to 50°C (32 to 122 °F) ATC: 5~45°C Weight: Weight
max. 95% RH non-condensing Auto Off: After 10 minutes
Battery Type: 1 x 1.5V AAA Power: 4 x 1.5V Button Cell
Auto-shut off: After 2 minutes of non-use. Size: 170*37*37mm
Dimensions: 81.5 x 61 x 37.5 mm/ Weight: 64 g Weight: 90g
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดคลอรีน
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
20 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Specifications
Free Chlorine range: 0.01ʙ2.00mg/Lʢppmʣ 0.01ʙ20.00mg/Lʢppmʣ
CLO range: 0.01ʙ2.00mg/Lʢppmʣ 0.01ʙ20.00mg/Lʢppmʣ
pH range: 2.00ʙ12.00
Temperature range: 0.0ʙ99.9ˆ(Temp.compensation componnet Pt1000ʣ
Free Chlorine resolution: 0.01mg/L
CLO resolution: 0.01mg/L
pH resolution: 0.01
Temperature resolution: 0.1°C
Free Chlorine accuracy: 90% confidence interval≤±10ˋFS
CLO accuracy: 90% confidence interval≤±10ˋFS
pH accuracy: 0.1 Level
Temperature accuracy: ±0.5°C
DPD-CL DPD NO.1 DPD NO.4
Specifications Specifications Specifications
For free chlorine determination by the DPD Water analysis couldn’t be easier. Precise DPD4 Test Tablets - Photometer or Comparitor
Free Chlorine method. USEPA accepted for dosing, long shelf life and easy handling make standard tablets and Rapid tablets for
reporting for drinking water analysis using the tablet reagent the most popular indicator Checkit Test Kits - Tests water for total
Hach Method 8021. system and the cheapest way to have analyse chlorine or Active oxygen levels.
Range: 0.02 to 2.00 mg/L Cl2. Sample Size: 10 mL. a parameter. The tablet reagent in the
Pack of 100 powder pillowst the proper settings aluminium blister pack withstands almost all
are in place. climatic conditions and external influences. In
addition, there is no safety risk for the user.
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดคลอรีน
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
21 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
HI711-25 HI771-25 CL203
Specifications Specifications Specifications
Reagents for Checker®HC HI 711 Total Chlorine, Parameter: Chlorine • Includes 10 packs (10 tablets ea.)
25 tests. Package: sachets • Requires 1 tablet per test - enough for 100 tests
Quantity: 25 • Foil packaging provides very stable
environment with long shelf life
• No messy powder reagents
• No dosing equipment required
CL205
• Easy to clean, rugged flat surface
Chlorine electrode
• Measures Chlorine and Temperature
• Interchangeable with ExStik® pH or
ORP Meter
• Complete with protective connector cap
CL207 480023 480024
Specifications Specifications Specifications
• 1ppm standard for chlorine meter calibration Range: 0, 0.25, 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 15, Detection Levels
• Complete with 3 ampules (20mL each) 1ppm 20, 25 ppm (mg/l) 0, 25, 50, 100, 200, 300, 400, 500, 750 ppm (mg/L)
calibration standards Details
Bottle of 50
Test Time
31 Seconds
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดคลอรีน
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
22 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Refractometer เครื่องวัดความเค็ม
8372 850036 EC170
Specifications Specifications Specifications
Measurement Unit: ppm, ppt, %, S.G Salinity Pen Range: 0 to 10 ppt Salinity Ranges: 0 to 10.00ppt
Salinity Range: 0~9999ppm / 1.0~100.0ppt 10 to 70 ppt 10.1 to 70.0ppt
0.0%~10.0% / 0.950~1.080(S.G.) based on NaCl Resolution: 0.01 ppt Max. Resolution: 0.01ppt
Temperature range: -5~60°C (23~140°F) 0.1 ppt 0.1ppt
Accuracy: ±%F.S ±1 digit / ±0.5°C Temperature Basic Accuracy: ±2% FS
Resolution: 1ppm or 0.1 ppt or 0.1% Range: 0 to 50 ºC Temperature: 32° to 122°F (0 to 50°C)
0.001(S.G) / 0.1°C Resolution: 0.1º Max. Resolution: 0.1°F/°C
Operating Environment: 0~50°C / < 80% RH Accuracy: ±1 ºC Basic Accuracy: ±0.9°F/1°C
Storage Environment: 0~60°C / < 90%% RH Dimensions: 165 × 38 × 38 mm Power: Four LR44 button batteries
Sensor life time: >6 months (with good maintenance) Weight: 2 oz (57 g) Dimensions/Wt: 1.3 x 6.5 x 1.4" (32 x 165 x 35mm)
Weight: approx. 115g Easy to carry and simple to operate Weight: 3.8oz (110g)
Highly stable and accurate readings with large
LCD display.
SB-1500PRO SB-2000PRO MA886
Specifications Specifications Specifications
Measuring Range : 0.01% ~ 10.0% Range 0.01% - 10.0% Range: 0 to 28 g/100 g
A.T.C: 0˚C~98˚C(0.01%~3.0%) Resolution: 0.01% (0.01%~2.99%) 0 to 34 g/100 ml
20˚C ~40˚C(3.1%~10.0%) 0.1%(3.0%~10.0%) 1.000 to 1.216 Specific Gravity
Resolution : 0.01% (0.01% ~ 2.99%) Accuracy: 0.01~2.00%(±0.1%) 0 to 26 ° Baumé
0.1%(3.0%~10.0%) 2.1~3.0%(±0.2%) 0 to 80°C / 32 to 175°F
Accuracy : 0.01~2.00%(±0.1%) / 2.01~3.0%(±0.2%) 3.1%~5.0%(±0.3%) Resolution: 0.1 g/100 g,0.1 g/100 ml,
3.1~4.0%(±0.3%) / 4.1~5.0%(±0.4%) 5.1%~10.0%(±0.5%) 0.001 Specific Gravity, 0.1 ° Baumé, 0.1°C / 0.1°F
5.1~8.0%(±0.5%) / 8.1~10.0%(±0.6%) Automatic Temperature Compensation (ATC) Accuracy: ±0.2 g/100 g,±0.2 g/100 ml
Natrium measuring Range: 0~3999mg Power Source: 2 x AAA batteries ±0.002 Specific Gravity, ±0.2 ° Baumé
Temperature Range: 0.0˚C~99.9˚C Dimensions: 17 x 2.5 x 2.45cm ±0.3°C / ±0.5°F
Ambient temperature : 5˚C~40˚C / Max 95% R.H Weight: 64.8g (includes batteries) Dimensions: 192 x 102 x 67 mm
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความเค็ม
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
23 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
PONPE 530BS RHS-10ATC RHS-28ATC
- Determines the amount of dissolved salt and This salinity refractometer is designed for Determines the amount of dissolved salt and
dissolved solids testing the concentration of salt water and dissolved solids
- Approved by strict quality and safety standards brine and used for quality control in research Durable and built to last long
- Durable and built to last long and clinical laboratories and marine industry. Heavy-duty and lightweight with its Plastic
- Heavy-duty and lightweight with its aluminum Its scale provides a direct reading of the construction
construction specific gravity and concentration (Parts per Easy to focus and calibrate
- Easy to focus and calibrate Thousand) of salt in water. Made with the highest and finest quality of
- Accurate testing results guaranteed plastic & rubber that makes it lightweight
Specifications Specifications Specifications
Brix: 0~32%Brix Salinity Test Range : 0 - 10% Salinity Test Range : 0 - 28%
Salinity: 0~28%salinity Min. Div. : 0.1% Resolution: Salinity: 0.2%
Minimum division: 0.2% Accuracy : ±0.10% ATC range: 10~30°C
ATC range: 10~30°C ATC range: 10~30°C Item size : approx. 20.5 cm long
Reference: 90709 Item size : approx. 20.5 cm long Item weight : approx 200g
Item weight : approx 200g
RHS-35ATC RHS-35-SG RF20
RHS-35-SG
This salinity refractometer is designed for • Rugged, durable construction - made from Compact size, easy to operate
testing the concentration of salt water and corrosion resistant brass. Provides accurate and repeatable measurements on
brine and used for quality control in research • High contrast demarcation line for easy, easy to read scale
and clinical laboratories and marine industry. accurate readings. Requires only 2 or 3 drops of solution
Its scale provides a direct reading of the specific • Easily adjusted zero line by means of readily The prism and lens with a simple focus adjustment
gravity and concentration (Parts per Thousand) accessible screw. Complete with case, calibration screwdriver, plastic
of salt in water. pipette and calibration solution
Specifications Specifications Specifications
Salinity Test Range : 0 - 35% Salinity Test Range : 0 - 4% (0-40 ppt) Type: Salt (ATC)
Min.Div.: 0.5% SG Scale: 1.000 to 1.030 Range: 0 to 100ppt (10 to 30°C),
Accuracy: ±0.5% 1.000 to 1.070 Refractive Index
ATC range: 10~30°C Resolution: 1ppt, 0.001
Item weight : approx 200g Accuracy: ±0.1%, ±0.001
Item size : approx. 20.5 cm long Dimensions: 7.6"x1.5"x1.5"(194x38x38mm)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความเค็ม
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
24 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
TDS Meter เครื่องวัด TDS
AP-1 TDS-3
Specifications Specifications
TDS Range: 0-5000 ppm (mg/L) TDS Range: 0 – 9990 ppm (mg/L)
Temperature Range: 0-80 °C; 32-176 °F Temp. Range: 0 – 80 °C
Resolution: 1 ppm Resolution: 0-999: 1 ppm; 1000-9990: 10 ppm
Temperature Resolution: 0.1 °C/F Temperature Resolution: 0.1°C
Accuracy: ± 2% Accuracy: ± 2%
EC-to-TDS Conversion Factor: NaCl (avg. 0.5) EC-to-TDS Conversion Factor: NaCl (avg. 0.5)
Calibration: Digital calibration by push button. ATC range: 1 to 50 °C
Housing: Water-resistant Power source: 2 x 1.5V
Power source: 1 x 3V button cell Battery life: 1000 hours of usage
Dimensions: 15 x 2.8 x 1.3 cm Dimensions: 15.5 x 3.1 x 2.3cm
Weight: 42.5 g (1.5 oz) Weight with case: 56.7g /76.5g
TDS-4 TDS-4TM TDS-EZ
Specifications Specifications Specifications
Range: 0 – 9990 ppm (mg/L) TDS Range: 0-9990 ppm (mg/L) Range: 0 – 9990 ppm (mg/L)
Resolution: 0-999: 1 ppm; 1000-9990 10 ppm Temp. Range: 0-80 ˚C Resolution: 0-999: 1 ppm; 1000-9990: 10 ppm
Accuracy: ± 2% Resolution: 0-999: 1 ppm; 1000-9990: 10 ppm Accuracy: ±3%
EC-to-TDS Conversion Factor: NaCl (avg. 0.5) (indicated by a ‘x10’ icon) EC-to-TDS Conversion Factor: NaCl (avg. 0.5)
ATC Range: 1 to 50 ˚C Temperature Resolution: 0.1 ˚C (Celsius only) Power source: 2 x 1.5V button cell batteries
Power source: 2 x 1.5V Accuracy: ±2% Battery life: Approx. 1000 hours of usage
Battery life: 1000 hours of usage EC-to-TDS Conversion Factor: NaCl (avg. 0.5) Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 “)
Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55 inches) ATC: Built-in sensor 1 to 50 ˚C Meter weight: 56.7g (2 oz)
Weight: 34g (1.2 oz) Power source: 2 x 1.5V button cell batteries Weight with package: 76.5g (2.7 oz)
Battery life: 1000 hours of usage
Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55”)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัด TDS
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
25 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
DM-1 DM-2
Specifications Specifications
Range: 0-9990 ppm Range: 0-9990 ppm
Dual Range 0-9990 ppm Dual Range – Measures from 0-999 ppm
Accuracy: ±2% Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5) Conversion Factor: NaCl (avg. 0.5)
Cable Length: 24.5” (including sensor) Cable Length: 46”,shielded cables
Fittings: 1/4” standard, Sensor: Dual, 1/4” diameter
also available with 3/8” or 1/2” Digital Calibration: NaCl 342 ppm.
Battery life: approx. 1000 hours of continuous use Power source: 2 x AA batteries (included)
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Battery life: Approx. 2 years
Weight: 79.4 g (2.8 oz.) Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.)
Weight: 201.3 g (7.1 oz.)
DHM-90 SP-1 QC-1
Specifications Specifications Specifications
TDS Range: 0-9990 ppm For use with the PSC-150, PSC-154 and CIC-152 TDS/EC Range: 0-5000 ppm (10,000 µS)
Accuracy: ±2% High quality, durable plastic construction Max. Set Point: 50 ppm (100 µS)
Battery: 1×3v (button cell) Stainless steel sensors Accuracy: ±3%
Size: 15×3×1.5 cm High quality construction ATC: No
Weight: 52 g (1.84 oz) Probe: 1/2” threaded bushing (NPT) Cable Length: 24.5” (including sensor)
Hold function: Saves measurements for Cable: 3 meter (9.8 ft) shielded cable Fittings: 1/4”
convenient reading and recordingDHM-90 Connector: 4-pin BNC Power source: 4 x 1.5V button cell batteries (389-A)
Auto-off function: Turns off meter after
10 minutes of non-use to save batteries. Thermometer pin: Yes Battery life: Approx. one year
Pressure Rating Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัด TDS
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
26 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Hardness Test Kit เครื่องวัดความกระด�างของน้ำ
480008 HI96735C
Specifications
Range : LR 0 to 250 mg/L; MR 200 to 500 mg/L; HR 400 to 750 mg/L
Resolution : 1.0 mg/L from 1 to 100 mg/L; 5.0 mg/Lfrom 100 to 750 mg/L
Accuracy : LR ±5mg/L ±4% of reading@ 25°C; MR ±7 mg/L ±3% of reading@ 25°C;
HR ±10 mg/L ±2% of reading@ 25°C
Light Source : light emitting diode
Light Detector : Silicon photocell with narrow band interference filter @ 466 nm
Specifications Method : Adaptation of the EPA recommended method 130.1.
Detection Range in Parts per Million: 0, 40, 80, Environment : 0 to 50°C (32 to 122°F); max 95% RH non-condensing
120, 180, 250, 425, 1000 ppm (mg/L) Power Supply : 9V battery
Detection Range in Grains per Gallon: 0, 2, 5, Dimensions : 192 x 104 x 69 mm (7.6 x 4.1 x 2.7")
7, 11, 15, 25, 58 gpg Weight : 360 g (12.7 oz.)
HI3812 HI3840 HI93735-00
Specifications Specifications Specifications
Method: Titration Method: Titration Range: 0 to 250 mg/L
Range: 0.0-30.0 mg/L Range: 0-150 mg/L Reagent kit for 100 tests
0-300 mg/L Smallest Increment: 5 mg/L The HI93735-00 are reagents for the low
0.3 mg/L Chemical Method: EDTA range colorimetric determination of total
Smallest Increment: 3 mg/L Number of Tests: approx 50 hardness. There are enough reagents for 100
Chemical Method: EDTA Weight: 120 g tests to be used with Hanna’s HI96735 Total
Number of Tests: 100 Hardness EPA Portable Photometer.
Weight: 460 g
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความกระด�างของน้ำ
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
27 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
ORP meter เครื่องวัด ORP
PONPE 590-ORP
Specifications
Measurement ORP -1000mV ~ 1000mV
range Temp (0.0 ~ 50.0)°C
ORP 1mV
Resolution
Temp 0.1°C
ORP ≤±5mV
Accuracy
Temp ±0.5°C
Working environment (0~50) °C
Optional Accessories
PONPE 590-P-10M Standard pH probe
EX900 ORP-200 RE300
Specifications Specifications Specifications
pH: 0.00 to 14.00pH ORP Range: -999 to +1000 mV ORP (mV): -999 to 999mV
ORP (mV): -999 to 999mV Temperature Range: 0-80 °C; 32-176 °F Max Resolution: 1mV
Chlorine (ppm): 0.01 to 10.00ppm Resolution: 1 mV; Basic Accuracy : ±4mV
Temperature: 23° to 194°F (-5 to 90°C) Temperature resolution is 0.1 °C/F Memory: 15 readings
Max Resolution: 0.01pH, 1mV, 0.01ppm, 0.1° Accuracy: 0.5% (±2mV) Dimensions/ Weight : 1.4x6.8x1.6"
Basic Accuracy: ±0.01pH, ±4mV, ±10% of reading Power source: 3 x 1.5V Weight: 3.8oz (110g)
±0.01ppm; ±1.8°F/±1°C Dimensions: 18.5 x 3.4 x 3.4 cm Data validation indicators show
Memory: 15 readings Weight: 96.4 g (3.4 oz) user the reading is stabilized
Dimensions/ Weight: Meter: 1.4x6.8x1.6"/ 3.85oz Data Hold, Auto shut-off and low battery indication
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัด ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
28 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Turbidity Meter เครื่องวัดความขุ�น
MI415
JTU FTU (NTU/FTU) SiO2 (mg/L)
JTU 1 19 2.5
FTU 0.053 1 0.13
SiO2 0.4 7.5 1
Specifications
Range : 0.00 to 50.00 FNU; 50 to 1000 FNU
Resolution : 0.01 FNU; 1 FNU
Accuracy : ±0.5 FNU or ±5% of reading, whichever is greater
Method : detection of scattered light
Light Source : high emission infrared LED
Light Detector : silicon photocell
Environment : 0 to 50°C / 32 to 122°F; max RH 100%
Battery Type : 1 x 9V
Auto-off : after 5 minutes of non-use
Dimensions : 92 x 104 x 52 mm
Weight : 380 g
TB400 AMT21
Specifications Specifications
Turbidity Range (NTU): 0.00 to 50.00, 50 to 1000 Range: 0~19.99NTU, 20~199.9NTU, 200~1000NTU
Resolution: 0.01 NTU Resolution: 0.01, 0.1, 1NTU
Accuracy: ±5% FS or ±0.5 NTU, whichever is greater Accuracy: ±3% <500NTU; ±5% >500NTU
Light source: LED, 850nm Response time: <10s
Standard: Designed to meet ISO 7027 Operating: 0~50°C, <85% RH
Response Time: <10 seconds Sample: 10ml
Dimensions: 6.1 x 3.0 x 2.4" (155 x 76 x 62mm)
Weight: 11.3oz (320g) Data memory: 150 points
Power: 4 x AAA battery
Size: 70 x 135 x 65mm
Weight: 168g
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัดความขุ�น
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
29 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
pH+EC Meter เครื่องวัด pH+EC
PONPE 519PC
Description
• Automatic or manual temperature compensation
• Automatic or manual ranging
• N.I.S.T. buffer recognition
• Digital and analog outputs
• Min/Max and 99 data points
• Data Hold
• 5 calibration points
• Electrode status indication
Specifications
pH Range: 0 to 14
mV/ORP Range: -1999 to +1999
Conductivity μS/cm Range: 0 to 19.9, 0 to 199.9, 0 to 1999
Conductivity mS/cm Range: 0 to 19.99, 0 to 199.9
TDS ppm Range: 0 to 19.99, 0 to 199.9, 0 to 1999
TDS ppt Range: 0 to 19.99, 0 to 199.9
Salinity ppt Range: 0 to 11.38, 0 to 80
Temperature ºC: -5 to 80ºC
COM-300 EC500 AMT03
Specifications Specifications Specifications
pH Range: 0 – 14 pH pH: 0.00 to 14.00pH pH Range: -2~16.00
EC Range: 0 – 9990 µS; 0 – 9.99 mS Conductivity: 0 to 199.9µS, 200 to 1999µS, ORP Range: -1000~1000
TDS Range: 0 – 8560 ppm (0.7 Scale) 2.00 to 19.99mS Temp.Range: 0~90.0°C
0 – 5000 ppm (0.5 Scale) TDS/Salinity/Fluoride:0 to 99.9ppm (mg/L), Conductivity Range: 0~2000 µS
Temperature Range: 0-55 °C; 32-130°F 100 to 999ppm (mg/L), 2.00~20.00 mS
Resolution: 0-99: 0.1 µS/ppm/ 0.01mS 1.00 to 9.99ppt (g/L) TDS Range: 0~1300 ppm
100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temperature: 23° to 194°F (-5 to 90°C) 1.30~13.00 ppt
Temp. resolution is 0.1 °C/F Max. Resolution: 0.1µS, 0.1ppm (mg/L) Salinity: 0~1000 ppm
Accuracy: ± 2% 0.01pH, 0.1°F/°C 1.00~12.00 ppt
Dimensions: 18.5 x 3.4 x 3.4 cm Basic Accuracy: ±2%FS, ±0.01pH, ±1.8°F/1°C Dimensions: Meter: 195×40×36 mm
Weight: 101.5g (3.6 oz) Dimensions: 1.4x6.8x1.6"/Weight: 3.8oz (110g) Kits: 230×205×50 mm
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัด pH+EC
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
30 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
EC600 PC900
Specifications Specifications
Conductivity: 0.00 to 199.9mS pH Measuring range : -2.00 to 19.99pH
TDS/Salinity: 0 to 100g/L Resolution : 0.1/0.01 pH
pH: -2 to 19pH Stability : ±0.01 pH/3h
mV: -1999mV to + 1999 Range : 0 to 100°C (automatic)
Temperature: pH/mV: 32 to 212°F (0 to 100°C); Other: 32 to 122°F (0 to 50°C) ORP Range (mV/ORP/EH) : -1999 mV to 0 to 1999mV
Max. Resolution: 0.01pH, 1mV, 0.01µS, 0.01mg/L, 0.01ppt, 0.1°F/°C Conductivity : 0.00~19.99μS/cm; 20.0~199.9μS/cm;
Basic Accuracy: ±0.02pH, ±0.15mV, ±1.5%FS, ±1°F/0.5°C 200~1999μS/cm; 2.00~19.99mS/cm;
Dimensions: 4.7x2.6x1.2" (120x65x31mm)/6.3oz (180g) 20.0~199.9mS/cm
TDS : 0 ~ 100g/L
Salinity : 0 ~ 100ppt
Resistivity : 0 ~ 100MΩ·cm
Temperature : 32 to 212°F (0 to 100°C)
JEDTO 501 PONPE 529PC
Specifications Specifications
pH: 0.00 ~ 14.00pH Measuring range: pH:0.00-14.00pH;
EC: 0.00 ~ 19990us / Cm TDS: 0-19990ppm;
Temperature: -50° ~ 70 °C EC: 0-19990muS/cm
Resolution pH: 0.01pH Resolution: 0.01 pH; 1ppm; 1muS/cm; 0.1°C; 0.1°F
EC: 10us / Cm Accuracy: pH: ±0.01 pH; TDS/EC: ±2%; Temp: 0.5°C
Temperature: 0.1°C Batteries: 3 * 1.5V LR44 button cell (not included)
Accuracy pH: ± 1pH Temp.: 0.1-60.0°C; 32.0-140.0°F
EC: ± 2% FS Calibration: pH: three points automatic calibration (6.86 & 4.00 & 9.18pH)
TDS: 1413muS/cm ; EC: 1413muS/cm
Auto shut off: 5 Minute
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ เครื่องวัด pH+EC
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
31 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
Probe PH, EC, DO, ORP หัววัด PH, EC, DO, ORP
590-ORP-10M 590-P-10M 850059P
Specifications Specifications Specifications
Range: -1000mV ~ 1000mV Range: 0 to 14 pH Range: 0 to 14 pH
Resolution: 1mV Resolution: 0.01 Resolution: 0.01 pH
Accuracy: ≤±5mV (Electronic component) Accuracy: 0.1 Accuracy: ±(0.02pH+2d)
Loop resistance: 500Ω (Max), DC 24V Loop resistance: 500Ω (Max), DC 24V Probe Dimensions: Probe Length: 5.5" (140 mm)
Outline dimension:96×96×105mm (H×W×D) Outline dimension:96×96×105mm (H×W×D) Probe Diameter: 12 mm
Hole dimension: 91×91mm (H×W) Hole dimension: 91×91mm (H×W) Cord Length: 49"
301PT-S EC605 PH305
Specifications Specifications Specifications
Measurement, 8 pin connector • Compatible with DO700 - 9-in-1 Portable • Compatible with DO700 - 9-in-1 Portable
Suited for general ORP Dissolved Oxygen Meter Dissolved Oxygen Meter
• Compatible with EC600 - 7-in-1 Portable Water • Compatible with PH300 - 3-in-1 Portable
㪌䴌¡Ñº à¤Ã×่ͧÇÑ´ ORP meter ·Ñ่Çä» Conductivity Meter pH/mV/Temperature Meter
ÊÓËÃѺ ËÑǵ‹ÍẺ 8 ¢Ò ÃØ‹¹ PH300 PH900 For complete specs please download the product • Compatible with EC600 - 7-in-1 Waterproof
EC600 EC900 DO700 EXTECH , AMTAST datasheet (not available for some accessories) Conductivity Kit
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ หัววัด PH, EC, DO, ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
32 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
MI56P E530BNC PONPE 512PH
Specifications Specifications Specifications
pH, temperature probe (replaceable Measure range: 0.00-14.00pH Range: 0 to 14 pH
electrode) for pH55 and pH56 Temp: 0~100°C Temperature range: 0 to 100°C
Multi-parameter electrode for use in water BNC Connector Reference type: Ag/AgCl
testing applications Cable length : 92cm (3Feet) Junction type: Annualar ceramic
Replacement electrode for Milwaukee Material : glass Body type: Glass
portable meters (sold separately) Dimension : 12 x 120mm Dimensions: 120(L)*12(Dia.)mm
Secure installation: slides into a fitting,
screws into the meter
AZ-861 PH-1110A 201-C
Specifications Specifications Specifications
Range : 2 to 12 pH Measurement range: pH: 2~12 Range: 0 to 14 pH
Resolution : 0.01pH Material: Plastic alloy Temperature Range: 0 to 80 °C
Accuracy : ±0.1pH Installation: Upper / Bottom NPT 3/4" thread Reference Junction: Single junction
Probe leght 130mm (cable 1m) Medium temperature:(0~50)°C Reference Type:Ag/AgCl sealed
Max. pressure: 0.6MPa (Max) Shape of Membrane: Sphere
Cable length: 10m as standard Shaft Length: 110mm
Diameter: 12mm
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ หัววัด PH, EC, DO, ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
33 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
DO705 SP-P10 MA991B/1
Specifications Specifications Specifications
The DO705 is a Dissolved Oxygen Electrode. This DO Measure range: 0.00-14.00pH Range: 0 to 13 pH
electrode offers a temperature and salinity sensor Resolution: 0.01pH Temperature range: -5 to 40°C
with automatic temperature compensation and Accuracy: ±0.02pH Reference electrolyte: KCL 3.5M
automatic salinity compensation as well as manual Sensor Probe: combination electrode Reference type: single, Ag/AgCl
barometric pressure compensation. For use with the Probe Length: 1.2m Shaft length: 120 mm
Extech DO700 Dissolved Oxygen Meter.
Probe Overall connection: 3/4 inch outer thread Diameter: 6 mm
EC505 PH105 RE305
Specifications Specifications Specifications
Easy to clean, rugged flat surface pH electrode Easy to clean, rugged flat surface pH electrode Easy to clean, rugged flat surface ORP electrode
conductivity cell module Interchangeable with ExStik® Chlorine Interchangeable with ExStik® Chlorine
Measures Conductivity, TDS, Salinity, or ORP meters
pH and Temperature Complete with protective connector cap Complete with protective connector cap
Non-interchangeable with ExStik® pH, Measures in liquids, semisolids, and solids Measures in liquids, semisolids, and solids
or ORP meters
Chlorine or ORP Meter ATC via built-in Pt-100Ohm sensor ATC via built-in Pt-100Ohm sensor
Complete with protective connector cap
ATC via built-in Pt-100Ohm sensor
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ หัววัด PH, EC, DO, ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
34 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
CON595H
Specifications
Conductivity: Two-electrode conductivity cell
Conductivity cell constant: 10.0cm-1
Measurement range: 0.05 to 200mS/cm
Material: Main material: PC
Measurement part: Graphite
Installation part: ABS
Installation: NPT 1/2" thread
Medium temperature: 0 to 50°C
Max Pressure: 0.5MPa (max)
Cable Length: Standard length: 5m
Storage Temp.: Temp. -20 to 60°C
Humidity: ≤90%RH
CON595L
Specifications
Electrode type: two combination electrode
Electrode material: 316L stainless steel
Component for temperature compensation: NTC 10KΩ
Mechanical connection: 1/2” NPT (ABS swift installation joint)
Sustained pressure: 0.5 MPa
Medium temperature: 0 - 50°C
Mode of drawing wire: draw the wire out directly
Length of the wire cable: ex work standard 5 m , or according to the user’s order
electrode constant:1.0 , 0.1 cm
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ หัววัด PH, EC, DO, ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
PROTRONICS CO.,LTD.
35 Measuring Instruments Store
Line: @ponpe / Facebook: »¹à» / Tel: 02-5316293,5-6 / Website: www.ponpe.com
CON2136-13 HI7632-00 HI7634-00
Specifications Specifications Specifications
Measurement range: 0.05 to 200mS/cm Two-pole amperometric probe Two-pole amperometric probe
Conductivity cell constant: 10.0cm-1 Internal temperature sensor Internal temperature sensor
Medium temperature: 0 to 50°C High range measurement (mS/cm and ppt) Low range measurement (μS/cm and ppm)
Max Pressure: 0.5MPa (max) Cable Length: 2 m (6.6 ') y 6 m (19.7') Cable Length: 2 m (6.6’), 4 m (13.1’) y 5 m (16.4’)
Storage Temp.: Temp. -20 to 60°C Probe Length: 64 mm (2.5”) Probe Length: 64 mm (2.5”)
Cable Length: Standard length: 5m Connection: Rosca ½ " Connection: Rosca ½ "
COM-100-P COM-300-P SP-P2
Specifications Specifications Specifications
• (Replacement EC/TDS Sensor for COM-100) • (Replacement EC/TDS /PH Sensor for COM-100) • PH-200 Replacement Probe
• Measures Conductivity and TDS • Measures Potential Hydrogen (pH), Electrical • (Replacement pH/Temp Sensor for PH-200)
• Measures Temperature Conductivity (EC), Total Dissolved Solids (TDS), • Measures pH and Temperature
Salinity and Temperature
38/40-41 ËÁÙ‹·Õè 3 ¶¹¹ÅÓÅÙ¡¡Ò µÓºÅ¤Ù¤µ หัววัด PH, EC, DO, ORP
ÍÓàÀÍÅÓÅÙ¡¡Ò ¨Ñ§ËÇÑ´»·ØÁ¸Ò¹Õ 12130
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search