Alternative Layout - Single Pages_Neat

Company Overview




Based in the heart of Somerset, our team of dedicated engineers offer a wealth of experience in all aspects of design,
manufacture and installation. Working across the UK, Europe & America, we are available to offer hands on advice.

Founded in 2010 Knight Electrical Switchgear was formed specifically to design and manufacture LV switchgear packages &
controls panels. We offer a full project solution from design concept through to final installation and commissioning. However we
can also offer any single element of your LV power requirement.


We manufacture using equipment from all leading switchgear component manufacturers, including Terasaki, Schneider Electric
(Merlin Gerin, Prisma), ABB, Socomec etc.



LV Switchgear & Package Substations…



Every switchboard is individually designed to suit our clients
requirements including: Some of our projects previously undertaken include:
Forms of separation: Form 2 to 4, type 1 to 7 Airbus Factory, Bristol
Ratings: 100A to 6300A Foreign Commonwealth Offices Abuja, Nigeria
Type tested assemblies (BS EN 61439-1) MOD Filton
Board access: Front and rear O2 Data Centre, Croydon
Cable entries: Top and bottom, entry or exit Royal United Hospital, Bath
Mains, Gen-Man, auto changeover controls
Electrical, mechanical interlocking All switchboards are manufactured in accordance with
Restricted, unrestricted earth fault the International Standards BS EN 61439.
Power factor correction (switchboard or stand alone)
Surge protection

The Old Workshop, Eaglewood Park, Ilminster, Somerset, TA19 9DQ - Tel:+44(0)1460 259 390

Dedicated suppliers of






at competitive prices

Outdoor Switchgear…



Our feeder pillars are designed to give permanent or temporary electrical equipment a secure and weather proof housing
no matter what the environment!


Features include:
Up to 4000A equipment Additional features available:
Standard or bespoke sizes Vandal resistant locks and hinges
Galvanised or paint finish Marine grade mounting boards
Front or rear access Type tested solution
Cable root frame (open or concealed) MCB, MCCB and fuse distribution
Integral distribution equipment Electrical controls
Door stays, light and anti-condensation heater
Over 20 years life expectancy All feeder pillars are manufactured in accordance with
the International Standards BS EN 61439.


The Old Workshop, Eaglewood Park, Ilminster, Somerset, TA19 9DQ - Tel:+44(0)1460 259 390

The Old Workshop, Eaglewood Park, Ilminster, Somerset, TA19 9DQ - Tel:+44(0)1460 259 390

Section Board’s & DB’s…


Section boards are designed to suit our customers Distribution boards are tailored to our customers individual
individual requirements. Features can include: requirements and are suitable for private, commercial or
industrial use. Features can include:
Forms of separation: Form 3b or 4, type 2 to 6
Type tested assemblies Single phase or three phase
Metering (with comm’s, Ofgem/MID approval) Split load and split metering
Auto changeover controls Key lockable door locks
Electrical, mechanical interlocking MCB, RCBO, fuse distribution boards
Earth fault Complete with controls i.e. photocells, timers etc.
Surge protection (class 1 or 2) Contactor controls
Board access: Front Metering (with comm’s, Ofgem/MID approval, split load)
Cable entries: Top and bottom, entry or exit Cable extensions
Cable extensions available (top, bottom or side) Surge protection



UPS Bypass Panels…


We design, build, install and commission control panels
for UPS applications, for smaller single phase systems up
to three phase larger systems.


10kVA - 300kVA 1ph or 3ph systems:
Wall mounted or floor standing construction
Early make aux contacts (Bypass)
Engineers comm socket
Interlocking systems available
Specific sizes and colours available
Paralleling panels also available











DC Isolation Panels…


We design, build, install and commission control &
isolation panels for UPS applications, for smaller single
phase systems up to three phase larger systems.


Wall mounted or floor standing construction
DC rated for various voltages
Poles linked to suit actual voltage rating
Linked for multiple strings of batteries
Protective devices of isolation devices
Specific sizes and colours available


All panels are manufactured in accordance with the
International Standards BS EN 61439.




The Old Workshop, Eaglewood Park, Ilminster, Somerset, TA19 9DQ - Tel:+44(0)1460 259 390

Changeover Panels…


Changeover panels are designed to suit our
customers individual requirements. Features can
include:


Forms of separation: Form 2 to 4, type 1 to 7
Ratings: 100A to 6300A
Cable entries: Top and bottom, entry or exit
Auto changeover controls
Electrical, mechanical interlocking
Mechanically interlocked contactors
Motorised MCCB’s
Motorised ACB’s
Motorised switch disconnectors
Including all major device manufacturers








Generator Control Panels…


We design, build, install and maintain generator control
systems for various applications. Features can include:


Load shedding
Gen/Gen synchronisation
Gen/Mains synchronisation
Store applications


All control panels are manufactured in accordance with
the International Standards BS EN 61439.

Control Panels…


We design, build, install and maintain control systems
for various applications, from single motor starter
panels to complete generator systems. Features can
include:


Load shedding
Export limiting
Metering
BMS controls
PLC controls
















G59 Panels…


G59 protection panels are used for various types of
generation schemes for grid connection, ensuring
complete G59 compliance. Each panel comes complete
with:


G59 protection relay with LCD display
Suitably rated disconnection device c/w aux contact for
commissioning
Isolation device
MID approved energy meter
Gland plates (which can be pre-drilled to aid connection
Engineers 13A socket (for use during commissioning)