Genesis Rules Document

We know washrooms.

Genesis Cubicle
Rules Document

Genesis Cubicle

Contents

Cubicle Standard Sizes, Limits & Rules 2 General Cubicle Rules 8

Cubicle Elements & Typical Configurations 3 Advanced Cubicle Rules – non-standard height 9

Standard Door Rules 4 Cubicle Components 10

Standard Partition Rules 5 Cubicle Accessories 11

Standard Pilaster Rules 6

Standard Pedestal Rules 7

Alderflat Drive, T 01782 277200 Page 1
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Cubicle Standard Sizes, Limits & Rules

FINISHED MATERIAL TYPE AND SIZES

SUPPLIER MATERIAL HEIGHT mm WIDTH mm THICKNESS mm
Pfleiderer 19
Pfleiderer MFC 2770 2070 19
Pfleiderer HPL 2770 2040 12.3
SGL 2770 1900

Material Floor Ceiling Cubicle Height O/A Cubicle
MFC 19mm Clearance Clearance From Floor Depth (mm) D
Required (mm) Level (mm) C Including Pilaster
(mm) A
B
Std 100
Min 60 Std 2100 Max Min
2097 142

HPL 19mm Std 100 Min 60 Std 2100 Max Min
2067 142

SGL 12.3mm Std 100 Min 60 Std 2100 Max Min
1921 121

Alderflat Drive, T 01782 277200 Page 2
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Cubicle Elements & Typical Configurations

Alderflat Drive, T 01782 277200 Page 3
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Standard Door Rules

DIAGRAM *1 *2, *3 & *4 *1 *5
MATERIAL
DOOR HEIGHT DOOR WIDTH TO OPENING INDICATOR BOLT HEIGHT From INDICATOR BOLT POSITION From
OPTIONS (mm) (mm) FFL (mm) door edge (mm)

OPEN IN HPL / MFC Size A 900 Std + 60 Size A & B 800 -68
OPEN OUT & SGL Size B 1100 Inline + 70 Size C & D 950
Size C 1300
NOTES: HPL / MFC Size D 1500 Std + 60 Size A & B 800 -93
& SGL Inline + 60 Size C & D 950
Size A 900
All Doors have 2 hinges Size B 1100
Size C 1300
Size D 1500

Doors are supplied with no cut out for indicator bolt when supplying Magnetic Catch

Magnetic Catch available in lieu of indicator bolt for up to 1300mm high doors

HPL Screen Print available Doors only (applied to front face only)

Max door opening width 1200mm

Min door opening width 400mm (requires Customer sign off as below 550mm std adult opening)

Alderflat Drive, T 01782 277200 Page 4
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle STANDARD PARTITION HEIGHT actual panel size (mm) STANDARD PARTITION WIDTH actual panel size (mm)

Standard Partition Rules Size A 900 MAX MIN
Size B 1100
MATERIAL Size C 1300 Size A 980
HPL Size D 1500
FH Square 1800 Size B 780
MFC
2040 HPL (B) Size C 580
SGL
Size D 380
NOTES
FH Square 115 (a)

Size A 900 2070 MFC (B) Size A 980
Size B 1100 Size B 780
Size C 1300 Size C 580
Size D 1500 Size D 380
FH Square 1800 FH Square 115 (a)

Size A 900 1900 (B) Size A 980
Size B 1100 Size B 780
Size C 1300 Size C 580
Size D 1500 Size D 380
FH Square 1800 FH Square 100 (a)

Pedestal to be positioned –100mm from front of cubicle (*1)
Pedestal required for partitions over 200mm wide (c) – front pilaster must have a pedestal when partition is less than 200mm (a)
Floor to Ceiling Post required for cubicles over MAX depth in a single piece
2no. partitions required fixed to floor to ceiling post with U channels (*2)
Shaped Partition - Front partition supplied to suit minimum shaped width with the rear partition making up the remainder of the required depth.
FH Square Partition - Rear partition supplied @ fixed1650mm wide with the front partition making up the remainder of the required depth.
Floor to Ceiling Post to be positioned -300mm from front of cubicle for freestanding cubicles (*3)

Alderflat Drive, T 01782 277200 Page 5
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Standard Pilaster Rules

MINIMUM /STANDARD PILASTER DIMENSIONS (MM)

DIAGRAM *1 *2 *3 *4 *5 *6 *7
MATERIAL PILASTER HEIGHT
HPL / MFC WALL END HANGING WALL END CLAPPING OPEN END HANGING OPEN END CLAPPING INTER HANGING INTER CLAPPING
Std 1850
SGL STD MIN STD MIN STD MIN STD MIN STD MIN STD MIN
HPL / MFC
125 115 125 115 125 115 125 115 200 170 200 170
SGL V-dim (100) V-dim (85) V-dim (100) V-dim (85)

OPEN IN Std 1850 125 100 125 100 125 100 125 100 200 170 200 170
OPEN OUT V-dim (100) V-dim (85) V-dim (100) V-dim (85)

Std 1850 125 115 125 115 125 115 125 115 200 170 200 170
V-dim (100) V-dim (85) V-dim (100) V-dim (85)

Std 1850 125 100 125 100 125 100 125 100 200 170 200 170
V-dim (100) V-dim (85) V-dim (100) V-dim (85)

Alderflat Drive, T 01782 277200 Page 6
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

tandard Pedestal Rules

PILASTER DIMENSIONS

DIAGRAM *1 *2 *3 *4 *5 *6 *7 *8
MATERIAL PARTITION WALL END OPEN END
HANGING WALL END OPEN END CLAPPING INTER HANGING INTER CLAPPING OFFSET INTER
ALL ≥ 200 CLAPPING HANGING
x1 pedestal ≥ 140 ≥ 140 ≥ 260 ≥ 260 ≥ 210
PEDESTAL REQUIRED ≥ 140 ≥ 140 x1 pedestal x2 pedestals x2 pedestals x1 pedestal
(SEE DIAGRAMS) x1 pedestal x1 pedestal x1 pedestal (one each side) (one each side) (offset V-Dim 135)
-75
Remove pedestal from Remove pedestal from Pedestal remains on
partition
partition partition

PEDESTAL POSITION FROM EDGE OF ALL -100 -75 -75 -75 -75 -75 -75
PILASTER / PARTITION

NOTES Pedestal Height Tolerance = +10mm Max ( 2no. 5mm packers)
Inline pilaster (wall end or open end) 1000mm wide and above requires an additional pedestal
Inline pilaster (wall end or open end) 1200mm wide and above requires a floor to ceiling post
Floor to ceiling post positioned -250mm from pilaster edge (door opening side)
An open end pilaster must have a pedestal fitted if one cannot be fitted to the partition

Alderflat Drive, T 01782 277200 Page 7
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

General Cubicle Rules

• The DOC M Building Regulations clearly states - Paragraph 5.14 - WC compartments within separate sex washrooms will satisfy Requirement M1 or M3 If a: if the swing of any Inward opening doors to standard
WC compartments is such that a 450mm diameter manoeuvring space is maintained between the swing of the door, the WC pan and the side wall of the compartment. If this space is not available please, either
confirm that the customer is happy for us to continue or advise of any layout changes (i.e. doors open out or cubicle depth change

• Check WC pan projection - door width to be taken into account as comment above - if door swing is too close to the pan pilaster or partition sizes should be adjusted
• Disabled cubicle width 1500mm clear from wall to inside face of partition
• Disabled cubicle depth 2200mm clear from wall to inside face of pilaster
• Ambulant cubicle width min 800mm clear
• Ambulant cubicle should have 750mm activity space from WC pan to rear face of pilaster
• Enlarged cubicle width min 1200mm clear
• Doors should be outward opening for Ambulant and Disabled WC’s.

Alderflat Drive, T 01782 277200 Page 8
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Advanced Cubicle Rules

MAXIMUM / MINIMUM DIMENSIONS MAXIMUM / MINIMUM DIMENSIONS

MATERIAL DOOR HEIGHT INDICATOR BOLT HEIGHT MATERIAL PILASTER HEIGHT PARTITION HEIGHT FLOOR O/ALL CUBICLE HEIGHT FROM FLOOR LEVEL
(mm) FROM FFL (mm) (mm) (mm) CLEARANCE (mm)

(mm)

MAX MIN MAX MIN MAX MIN MAX MIN MAX / MIN MAX MIN

OPEN IN HPL / MFC 2770 900 1200 500
SGL

ALL 2770 1800 2770 1800 100 2870 1950

OPEN OUT HPL / MFC 2770 900 1200 500
SGL

NOTES Doors above 1500mm high will require 3 hinges

Genesis non-standard overall height will not require special drilling patterns but will require a non-standard surcharge of 10%.
Genesis with non-standard door heights does require special drilling drawings and a 10% surcharge.

Alderflat Drive, T 01782 277200 Page 9
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Genesis Cubicle

Cubicle Components

Type Material / Finish Code Notes Type Material / Finish Code Notes

Plastic – ABS Metal – Aluminium U Channel 2m: 1 Per WE Pils
Light Grey Satin Anodised 0630018C2
Indicator Bolt 0370003 1 per door U-Channel for 13mm
SGL
Screw pack 0046002N 2 Per Partition

Indicator Bolt Metal – Zinc 19mm 1 per door U-Channel for 19mm Metal – Aluminium U Channel 2m: 1 Per WE Pils
Light Grey MFC/HPL: MFC/HPL Satin Anodised 0630021C2 2 Per Partition
0370100T
Screw pack:
13mm SGL: 0046003N
0370100SG

Hinge for 13mm SGL Metal – Zinc Single hinge: 3 per door Headrail for 13mm Metal – Aluminium Headrail 3m: To suit overall
Light Grey 0330022N SGL Satin Anodised 0331037N cubicle length

Screw pack: 1 per headrail
0046014N
1 per return end
End cap: 0130004

Hinge for 19mm Metal – Zinc Single hinge: 2 Per Door Headrail for 19mm Metal – Aluminium Headrail 3m: To suit overall
MFC/HPL Light Grey 0330012N 3 if >750 MFC/HPL Satin Anodised 0331036N cubicle length
2 per Child Door
Screw pack: 1 per headrail
0046015N
1 per return end
End cap: 0130003

Pedestal Plastic – ABS 0300923 1 per inline Outward Opening Plastic – ABS 0370023 1 per outward door
Light Grey pilaster Keep Light Grey
Pedestal 2 if >1000 to
Metal – Zinc 19mm 1199 Outward Opening Metal – Zinc 0370120 1 per outward door
Door Buffer Light Grey MFC/HPL: Keep Light Grey
0390100T 1 per inline
Alderflat Drive, pilaster Magnetic Catch
Newstead Industrial Estate 13mm SGL: 2 if >1000 to
Trentham, Stoke-on-Trent 0390100SG 1199
ST4 8HX
Rubber 0300005 2 per door Metal Catch: 0300162 1 per door
Black Screws: 0705810

Counterplate: 0300163
Screws: 0706203

T 01782 277200 Page 10
E [email protected]
www.venesta.co.uk

Genesis Cubicle

Cubicle Accessories

Type Material/Finish Code Standard? Notes Type Material/Finish Code Standard? Notes

Coat Hook ABS Light Grey 0300139 ✓ Standard for Coat Hook Brushed 19mm MFC/HPL: ✘
Genesis ABS 65mm Stainless Steel CH65T
Fittings
Coat Hook 13mm SGL:
Standard for 90mm CH65SG
Genesis Alu
Coat Hook Brushed 19mm MFC/HPL: ✓ Fittings Brushed 19mm MFC/HPL: ✘
30mm Stainless Steel CH30T Stainless Steel CH90T
Standard for
13mm SGL: Genesis ABS 13mm SGL:
CH30SG Fittings CH90SG

Toilet Roll ABS Light Grey 0300303 ✓ Toilet Roll Brushed 0302509 ✘
Holder Holder Stainless Steel

Lockable ABS Light Grey 0300403 Standard for Double Brushed 0302510 ✘
Toilet Roll Toilet Roll Stainless Steel
✓ Genesis ABS
Holder Fittings Holder

Lockable Standard for Jumbo Roll Brushed
✓Toilet Roll Satin finish zinc 0380074N Holder Stainless Steel ✘
Genesis Alu 0302500

Holder Fittings

Pull Handle Satin Anodised 225mm: 0182227 ✓ *Rose set is Pull Handle Brushed 225mm: 0182218 ✘ *Rose set is
Pair Aluminium 400mm: 0182226 optional extra, Pair Stainless Steel 400mm: 0182232 ✘ optional extra,
✘ allow 2 rose allow 2 rose
sets per handle sets per handle
Pull Handle Satin Anodised 225mm: 0182222 ✘ pair Pull Handle Brushed 225mm: 0182221 ✘ pair
Single Aluminium 400mm: 0182225 ✘ Single Stainless Steel 400mm: 0182216 ✘
*Must be *Must be
supplied with supplied with
rose set or bolt rose set or bolt
through disc set through disc set

Pull Handle Satin Anodised 0182231 ✘ Pull Handle Brushed 0182230 ✘
Rose Set Aluminium Rose Set Stainless Steel

Pull Handle Aluminium 0182229 ✘ Pull Handle Brushed 0182228 ✘
Bolt Through Bolt Through Stainless Steel

Disc Set Disc Set

Alderflat Drive, T 01782 277200 Page 11
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX