Centurion Cubicle Rules Document

We know washrooms.

Centurion Cubicle
Rules Document

Centurion Cubicle

Contents

Cubicle Standard Sizes, Limits & Rules 2 General Cubicle Rules 8

Cubicle Elements & Typical Configurations 3 Advanced Cubicle Rules – non-standard height 9

Standard Door Rules 4 Cubicle Components 10

Standard Partition Rules 5 Cubicle Accessories 11

Standard Pilaster Rules 6-7

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 1
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Cubicle Standard Sizes, Limits & Rules

FINISHED MATERIAL TYPE AND SIZES

SUPPLIER MATERIAL HEIGHT mm WIDTH mm THICKNESS mm
Pfleiderer 19
Pfleiderer MFC 2770 2070 19
Pfleiderer HPL 2770 2040 12.3
SGL 2770 1900
Material
Floor Ceiling Cubicle Height O/A Cubicle
MFC 19mm Clearance Clearance From Floor Depth (mm) D
Required (mm) Level (mm) C Including Pilaster
(mm) A
B
Std 100
Min 20 Std 2100 Max Min
2092 137

HPL 19mm Std 100 Min 20 Std 2100 Max Min
2062 137

SGL 12.3mm Std 100 Min 20 Std 2100 Max Min
1922 122

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 2
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Cubicle Elements & Typical Configurations

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 3
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Standard Door Rules

DIAGRAM *1 *2 & *3 *1 *4
MATERIAL INDICATOR BOLT HEIGHT From FFL INDICATOR BOLT POSITION
DOOR HEIGHT OPTIONS DOOR WIDTH TO OPENING
(mm) (mm) (mm) From door edge (mm)

OPEN IN HPL / MFC Std 1965 Std + 60 Std 1000 -82
OPEN OUT & SGL
Std 1000 -82
NOTES: HPL / MFC Std 1940 Std + 60
& SGL

All HPL/MFC Doors have 2 hinges except when 750mm wide and over they require 3 hinges
All SGL Doors have 3 hinges
Max door opening width 1200mm
Min door opening width 400mm (requires Customer sign off as below 550mm std adult opening)

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 4
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Standard Partition Rules

STANDARD PARTITION WIDTH

MATERIAL STANDARD PARTITION HEIGHT actual panel size (mm) actual panel size (mm)
HPL / MFC Std 2000 (A)
MAX MIN
SGL
Max 2000 (B) Min 115 (C)
NOTES
Std 2000 (A) Max 1900 (D) Min 115 (C)

Floor to Ceiling Post required for cubicles over MAX depth in a single piece

2no. partitions required fixed to central post with U channels (*1)

Floor to Ceiling Post to be positioned -300mm from front of cubicle for freestanding cubicles (*2)

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 5
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Standard Pilaster Rules

DIAGRAM *1 *2 MINIMUM /STANDARD PILASTER DIMENSIONS (MM) *5 *6 *7
PILASTER HEIGHT WALL END HANGING
MATERIAL *3 *4 INTER HANGING INTER CLAPPING
Std 2100 STD STD STD
HPL / MFC WALL END CLAPPING OPEN END HANGING OPEN END CLAPPING
SGL 80 160 160
STD STD STD V-dim (80) V-dim (80)
HPL / MFC
OPEN IN SGL 80 80 80 160 160
OPEN OUT V-dim (80) V-dim (80)
Std 2100 80 80 80 80

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 6
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Standard Pilaster Rules

DIAGRAM *8 MINIMUM /STANDARD PILASTER DIMENSIONS (MM) *12 *13
MATERIAL
INLINE HANGING *9 *10 *11 INLINE OPEN END INLINE OPEN END
HPL / MFC HANGING CLAPPING
SGL STD INLINE CLAPPING INTER INLINE HANGING INTER INLINE CLAPPING
179 STD STD
OPEN IN HPL / MFC (Min 115 Infill Panel) STD STD STD
SGL 164 235 235
OPEN OUT (Min 100 Infill Panel) 179 235 235 (Min 115 Infill Panel) (Min 115 Infill Panel)
(Min 115 Infill Panel) (Min 115 Infill Panel) (Min 115 Infill Panel)
MAX INFILL 179 220 220
PANEL WIDTH (Min 115 Infill Panel) 164 220 220 (Min 100 Infill Panel) (Min 100 Infill Panel)
(Min 100 Infill Panel) (Min 100 Infill Panel) (Min 100 Infill Panel)
164 235 235
(Min 100 Infill Panel) 179 235 235 (Min 115 Infill Panel) (Min 115 Infill Panel)
(Min 115 Infill Panel) (Min 115 Infill Panel) (Min 115 Infill Panel)
220 220
164 220 220 (Min 100 Infill Panel) (Min 100 Infill Panel)
(Min 100 Infill Panel) (Min 100 Infill Panel) (Min 100 Infill Panel)

MFC = 2070 HPL = 2040 SGL = 1900

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 7
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

General Cubicle Rules

• The DOC M Building Regulations clearly states - Paragraph 5.14 - WC compartments within separate sex washrooms will satisfy Requirement M1 or M3 If a: if the swing of any Inward opening doors to standard
WC compartments is such that a 450mm diameter manoeuvring space is maintained between the swing of the door, the WC pan and the side wall of the compartment. If this space is not available please, either
confirm that the customer is happy for us to continue or advise of any layout changes (i.e. doors open out or cubicle depth change).

• Check WC pan projection - door width to be taken into account as comment above - if door swing is too close to the pan pilaster or partition sizes should be adjusted
• Disabled cubicle width 1500mm clear from wall to inside face of partition
• Disabled cubicle depth 2200mm clear from wall to inside face of pilaster
• Ambulant cubicle width min 800mm clear
• Ambulant cubicle should have 750mm activity space from WC pan to rear face of pilaster
• Enlarged cubicle width min1200mm clear
• Doors should be outward opening for Ambulant and Disabled WC’s.

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 8
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Advanced Cubicle Rules

MAXIMUM / MINIMUM DIMENSIONS

DOOR HEIGHT INDICATOR BOLT MATERIAL PILASTER HEIGHT PARTITION HEIGHT DOOR FLOOR CLEARANCE O/ALL CUBICLE HEIGHT
(mm) HEIGHT FROM FFL
(mm) (mm) (mm) FROM FLOOR LEVEL (mm)
(mm)
MATERIAL

MAX MIN MAX MIN MAX MIN MAX MIN MAX OTHER MIN MAX MIN

2870 1925 100 FC: 100 FC:
2885 1940
HPL / MFC 2735 1500 1200 500 ALL (supplied (supplied 2770 1825 100 50 10
SGL
OPEN IN / @ 3000) @ 2100)
OUT
2870 1925 100 FC: 100 FC:
2885 1940
2735 1500 1200 500 ALL (supplied (supplied 2770 1825 100 50 10

@ 3000) @ 2100)

Centurion non-standard height must be priced as Centurion Full Height option.

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 9
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Cubicle Components

Type Material/Finish Code Notes Type Material/Finish Code Notes

19mm MFC/HPL: U Channel 2m: 1 Per WE
0630018C2 inline pil
Indicator Bolt Metal – Zinc 0333000T 1 per door U-Channel for
Satin Anodised 13mm SGL: 13mm SGL Metal – Aluminium U Channel 3m: 2 Per
Satin Anodised 0630018C3 Partition
0333000SG
Screw pack 1 per U
0046002N Channel

Hinge for 13mm Metal – Zinc Single hinge: 3 per door U-Channel for U Channel 2m: 1 Per WE
Satin Anodised 0330024N 19mm 0630021C2 inline pil
SGL
MFC/HPL Metal – Aluminium U Channel 3m: 2 Per
Satin Anodised 0630021C3 Partition

Screw pack: 1 per U
0046003N Channel

Hinge for 19mm Metal – Zinc Single hinge: 2 Per Door Wall End Metal – Aluminium 2.1m Kit: 1 per wall end
Satin Anodised 0330014N 3 if >750 Pilaster Satin Anodised 0349101A
MFC/HPL
3m Metalwork:
9S49101M / 3m
Fittings: 9S49101F

Outward Metal – Single LH hinge: 2 Per Door Intermediate 2.1m Kit: 1 per inter
Opening Hinge Aluminium 0267100 3 if >750 Pilaster Metal – Aluminium 0349100A partition
Satin Anodised
Single RH hinge: Satin Anodised 3m Kit: 9S49100A
0267101

Z Keep for Metal – 2m: 0349302 1 per outward Return End Metal – Aluminium 2.1m Kit: 1 per return
19mm Aluminium door Pilaster Satin Anodised 0349102A end partition
Satin Anodised
MFC/HPL (with In-line Pilaster 3m Metalwork:
fixings) 9S49102M / 3m
Fittings:
9S49102FT

Z Keep for Metal – 1 per outward Metal – Aluminium 2.1m Metalwork: 1 per inline
13mm SGL Aluminium 2m: 0349402 door Satin Anodised 349103M / 2m pilaster
(with fixings) Satin Anodised Fittings: 0349103F

3m Metalwork:
9S49103M / 3m
Fittings: 9S49103F

Door Buffer Rubber 0300005 2 per inward Headrail Headrail 3m: To suit overall
Black door Metal – Aluminium 0630026C3 cubicle length

Satin Anodised Screws: 0700204

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 10
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 11
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX

Centurion Cubicle

Cubicle Accessories

Type Material/Finish Code Standard? Notes Type Material/Finish Code Standard? Notes

Coat Hook Brushed 19mm MFC/HPL: Requires 1 tube Lockable Satin finish zinc 0380074N ✓
30mm Stainless Steel CH30T Toilet Roll
✓ of glue per 50
Coat Hook 13mm SGL: hooks - Holder
65mm CH30SG 0444006

Coat Hook Brushed 19mm MFC/HPL: ✘ Toilet Roll Brushed 0302509 ✘
90mm Stainless Steel CH65T Holder Stainless Steel
✘
13mm SGL:
CH65SG

Brushed 19mm MFC/HPL: Double Brushed 0302510 ✘
Stainless Steel CH90T Toilet Roll Stainless Steel

13mm SGL: Holder
CH90SG

Jumbo Roll Brushed 0302500 ✘
Holder Stainless Steel

Pull Handle Satin Anodised 225mm: 0182227 ✓ *Rose set is Pull Handle Brushed 225mm: 0182218 ✘ *Rose set is
Pair Aluminium 400mm: 0182226 optional extra, Pair Stainless Steel 400mm: 0182232 optional extra,
allow 2 rose allow 2 rose
Pull Handle Satin Anodised 225mm: 0182222 sets per handle Pull Handle Brushed 225mm: 0182221 sets per handle
Single Aluminium 400mm: 0182225 Single Stainless Steel 400mm: 0182216
✘ pair ✘ pair

✘ *Must be ✘ *Must be
supplied with supplied with
rose set or bolt rose set or bolt

✘ through disc set ✘ through disc set

Pull Handle Satin Anodised 0182231 ✘ Pull Handle Brushed 0182230 ✘
Rose Set Aluminium Rose Set Stainless Steel

Pull Handle Aluminium 0182229 ✘ Pull Handle Brushed 0182228 ✘
Bolt Through Bolt Through Stainless Steel

Disc Set Disc Set

Alderflat Drive, T 01782 277200 INTERNAL USE ONLY Page 12
E [email protected]
Newstead Industrial Estate www.venesta.co.uk
Trentham, Stoke-on-Trent

ST4 8HX