We know washrooms. Award Cubicle Rules Document
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 1 Contents Cubicle Standard Sizes, Limits & Rules 2 General Cubicle Rules 8 Cubicle Elements & Typical Configurations 3 Advanced Cubicle Rules – non-standard height 9 Standard Door Rules 4 Advanced Cubicle Rules – overpanels 10 Standard Partition Rules 5 Cubicle Components 11 Standard Pilaster Rules 6 Cubicle Accessories 12 Standard Pedestal Rules 7
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 2 Cubicle Standard Sizes, Limits & Rules FINISHED MATERIAL TYPE AND SIZES SUPPLIER MATERIAL HEIGHT mm WIDTH mm THICKNESS mm Pfleiderer MFC 2770 2070 19 Pfleiderer HPL 2770 2040 19 Pfleiderer SGL 2770 1900 12.3 Material Floor Clearance (mm) A Ceiling Clearance Required (mm) B Cubicle Height From Floor Level (mm) C O/A Cubicle Depth (mm) D Including Pilaster MFC 19mm Std 100 Min 60 Std 2100 Max 2097 Min 142 HPL 19mm Std 100 Min 60 Std 2100 Max 2067 Min 142 SGL 12.3mm Std 100 Min 60 Std 2100 Max 1921 Min 121
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 3 Cubicle Elements & Typical Configurations
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 4 Standard Door Rules DIAGRAM *1 *2, *3 & *4 *1 *5 MATERIAL DOOR HEIGHT OPTIONS (mm) DOOR WIDTH TO OPENING (mm) INDICATOR BOLT HEIGHT From FFL (mm) INDICATOR BOLT POSITION From door edge (mm) OPEN IN HPL / MFC & SGL Std 2000 Size A 1300 Size B 1100 Std + 60 Inline + 70 Std 1000 Size A 950 Size B 800 -68 OPEN OUT HPL / MFC & SGL Std 2000mm Size A 1300mm Size B 1100mm Std + 60 Inline + 60 Std 1000 Size A 1000 Size B 800 -93 NOTES: All HPL/MFC Doors have 2 hinges except when 750mm wide and over they require 3 hinges All SGL Doors have 3 hinges Magnetic Catch available in lieu of indicator bolt for 1100 & 1300mm high doors. Max door opening width 1200mm Min door opening width 400mm ( requires Customer sign off as below 550mm std adult opening)
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 5 Standard Partition Rules MATERIAL STANDARD PARTITION HEIGHT actual panel size (mm) STANDARD PARTITION WIDTH actual panel size (mm) MAX MIN HPL Std 2000 (A) Max 2040 (B) Min 115 (C) MFC Std 2000 (A) Max 2070 (B) Min 115 (C) SGL Std 2000 (A) Max 1900 (B) Min 100 (C) NOTES Pedestal to be positioned –100mm from front of cubicle (*1) Pedestal required for partitions over 200mm wide (D) Floor to Ceiling Post required for cubicles over MAX depth in a single piece 2no. partitions required fixed to central post with U channels (*2) Floor to Ceiling Post to be positioned -300mm from front of cubicle for freestanding cubicles (*3)
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 6 Standard Pilaster Rules MINIMUM /STANDARD PILASTER DIMENSIONS (MM) DIAGRAM *1 *2 *3 *4 *5 *6 *7 MATERIAL PILASTER HEIGHT WALL END HANGING WALL END CLAPPING OPEN END HANGING OPEN END CLAPPING INTER HANGING INTER CLAPPING STD MIN STD MIN STD MIN STD MIN STD MIN STD MIN OPEN IN HPL / MFC Std 2000 125 115 125 115 125 115 125 115 200 V-dim (100) 170 V-dim (85) 200 V-dim (100) 170 V-dim (85) SGL Std 2000 125 100 125 100 125 100 125 100 200 V-dim (100) 170 V-dim (85) 200 V-dim (100) 170 V-dim (85) OPEN OUT HPL / MFC Std 2000 125 115 125 115 125 115 125 115 200 V-dim (100) 170 V-dim (85) 200 V-dim (100) 170 V-dim (85) SGL Std 2000 125 100 125 100 125 100 125 100 200 V-dim (100) 170 V-dim (85) 200 V-dim (100) 170 V-dim (85) MAX PILASTER WIDTH MFC = 2070mm HPL = 2040mm SGL = 1900mm
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 7 Standard Pedestal Rules PILASTER DIMENSIONS DIAGRAM *1 *2 *3 *4 *5 *6 *7 *8 MATERIAL PARTITION WALL END HANGING WALL END CLAPPING OPEN END HANGING OPEN END CLAPPING INTER HANGING INTER CLAPPING OFFSET INTER PEDESTAL REQUIRED (SEE DIAGRAMS) ALL ≥ 200 x1 pedestal ≥ 140 x1 pedestal ≥ 140 x1 pedestal ≥ 140 x1 pedestal ≥ 140 x1 pedestal ≥ 260 x2 pedestals (one each side) Remove pedestal from partition ≥ 260 x2 pedestals (one each side) Remove pedestal from partition ≥ 210 x1 pedestal (offset V-Dim 135) Pedestal remains on partition PEDESTAL POSITION FROM EDGE OF PILASTER / PARTITION ALL -100 -75 -75 -75 -75 -65 -65 -75 NOTES Pedestal Height Tolerance = +10mm Max ( 2no. 5mm packers) Inline pilaster (wall end or open end) 1000mm wide and above requires an additional pedestal Inline pilaster (wall end or open end) 1200mm wide and above requires a floor to ceiling post Floor to ceiling post positioned -250mm from pilaster edge (door opening side) An open end pilaster must have a pedestal fitted if one cannot be fitted to the partition
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 8 General Cubicle Rules • The DOC M Building Regulations clearly states - Paragraph 5.14 - WC compartments within separate sex washrooms will satisfy Requirement M1 or M3 If a: if the swing of any Inward opening doors to standard WC compartments is such that a 450mm diameter manoeuvring space is maintained between the swing of the door, the WC pan and the side wall of the compartment. If this space is not available please, either confirm that the customer is happy for us to continue or advise of any layout changes (i.e. doors open out or cubicle depth change • Check WC pan projection - door width to be taken into account as comment above - if door swing is too close to the pan pilaster or partition sizes should be adjusted • Disabled cubicle width 1500mm clear from wall to inside face of partition • Disabled cubicle depth 2200mm clear from wall to inside face of pilaster • Ambulant cubicle width min 800mm clear • Ambulant cubicle should have 750mm activity space from WC pan to rear face of pilaster • Enlarged cubicle width min1200mm clear • Doors should be outward opening for Ambulant and Disabled WC’s.
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 9 Advanced Cubicle Rules Award non-standard height will not require special drilling patterns but will require a non-standard surcharge of 10%. MAXIMUM / MINIMUM DIMENSIONS MAXIMUM / MINIMUM DIMENSIONS MATERIAL DOOR HEIGHT (mm) INDICATOR BOLT HEIGHT FROM FFL (mm) MATERIAL PILASTER HEIGHT (mm) PARTITION HEIGHT (mm) FLOOR CLEARANCE (mm) O/ALL CUBICLE HEIGHT FROM FLOOR LEVEL (mm) MAX MIN MAX MIN MAX MIN MAX MIN Std MAX MIN OPEN IN HPL / MFC SGL 2770 900 1200 500 ALL 2770 1800 2770 1800 100 2870 1900 OPEN OUT HPL / MFC SGL 2770 900 1200 500
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 10 Advanced Cubicle Rules Award with overpanels will require special drilling details for Production and an overpanel fixing kit. Non-standard surcharge of 10% must be applied. AWARD DOOR WITH OVERPANEL MATERIAL STD DOOR HEIGHT (mm) LIFT OFF DOOR HEIGHT (mm) DOOR WIDTH TO OPENING (mm) OVERPANEL HEIGHT (mm) OVERPANEL WIDTH TO DOOR OPENING (mm) OPEN IN HPL / MFC Max 2540 Min 1770 Max 2510 Min 1740 Std + 60 Inline +70 Max 970 Min 200 Std + 100 (50 each side) SGL Max 2540 Min 1770 Max 2510 Min 1740 Std + 60 Inline +70 Max 970 Min 200 Std + 100 (50 each side) OPEN OUT HPL / MFC Max 2540 Min 1770 Max 2510 Min 1740 Std + 60 Inline +60 Max 970 Min 200 Std + 100 (50 each side) SGL Max 2540 Min 1770 Max 2510 Min 1740 Std + 60 Inline +60 Max 970 Min 200 Std + 100 (50 each side) NOTES: Overpanel only available on std height cubicle and above All Doors over 750mm wide require 3 hinges. All SGL Doors have 3 hinges Door width (inward & outward) = pilaster opening plus 60mm (35mm hanging & 25mm clapping) + 10mm for in-line Max door opening width 1200mm Min door opening width 400mm
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 11 Modesty Screen MODESTY SCREENS WITH FLOOR TO CEILING POST actual panel size (mm) MODESTY SCREEN WITH PEDESTAL actual panel size (mm) MODESTY SCREEN (NO PEDESTAL) actual panel size (mm) MATERIAL HEIGHT WIDTH HEIGHT WIDTH HEIGHT WIDTH HPL Std 2000 Max 2770 Min 500 Std 800 Max 2040 Min 250 Max 2770 Min 500 Max 450 Min 250 Max 1200 Min 500 Max 450 Min 250 MFC Std 2000 Max 2770 Min 500 Std 800 Max 2070 Min 250 Max 2770 Min 500 Max 450 Min 250 Max 1200 Min 500 Max 450 Min 250 SGL Std 2000 Max 2770 Min 500 Std 800 Max 1900 Min 250 Max 2770 Min 500 Max 450 Min 250 Max 1200 Min 500 Max 450 Min 250 NOTES Modesty screen panels over 2000mm high will require a 3M U channel (0630021C3 MFC/HPL) or (0630018C3 SGL) Modesty screens without a pedestal (no post) can be rounded on one top corner or both top and bottom – minimum 100mm radius 0333557 - Screen Fixing Pack (3 x Pairs of Brackets) QTY 1 per screen U channel fixing detail - T-nut through fixings (651625) M6 X 45mm hexagonal bolt
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 12 Cubicle Components Type Material/Finish Code Notes Type Material/Finish Code Notes Indicator Bolt Plastic – ABS Light Grey 0370003 1 per door U-Channel for 13mm SGL Metal – Aluminium Satin Anodised U Channel 2m 0630018C2 Screw pack 0046002N 1 Per WE Pils 2 Per Partition Indicator Bolt Metal – Zinc Satin Anodised 19mm MFC/HPL: 0370110T 13mm SGL: 0370110SG 1 per door U-Channel for 19mm MFC/HPL Metal – Aluminium Satin Anodised U Channel 2m: 0630021C2 Screw pack: 0046003N 1 Per WE Pils 2 Per Partition Hinge for 13mm SGL Metal – Zinc Satin Anodised Single hinge: 0330024N 3 per door Headrail for 13mm SGL Metal – Aluminium Satin Anodised Headrail 3m: 0331037N Screw pack: 0046014N End cap: 0130004 To suit overall cubicle length 1 per headrail 1 per return end Hinge for 19mm MFC/HPL Metal – Zinc Satin Anodised Single hinge: 0330014N 2 Per Door 3 if >750 2 per Child Door Headrail for 19mm MFC/HPL Metal – Aluminium Satin Anodised Headrail 3m: 0331036N Screw pack: 0046015N End cap: 0130003 To suit overall cubicle length 1 per headrail 1 per return end Pedestal Plastic – ABS Light Grey 0332030 1 per inline pilaster 2 if >1000 to 1199 Outward Opening Keep Metal – Zinc Satin Anodised 0370122 1 per outward door Pedestal Metal – Zinc Satin Anodised 19mm MFC/HPL: 0333014T 13mm SGL: 0333014SG 1 per inline pilaster 2 if >1000 to 1199 Outward Opening Keep Metal – Zinc Light Grey 0370120 1 per outward door
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 13 Door Buffer Rubber Black 0300005 2 per door Floor to Ceiling Post Metal – Aluminium Satin Anodised Post 3750mm: 0630053 As required Casting pack (pair): 0304136N 1 per post Through Fixings: 0352026N 5 per post (required when post is used for cubicle stability)
Award Cubicle Alderflat Drive, Newstead Industrial Estate Trentham, Stoke-on-Trent ST4 8HX T 01782 277200 E [email protected] www.venesta.co.uk INTERNAL USE ONLY Page 14 Cubicle Accessories Type Material/Finish Code Standard? Notes Type Material/Finish Code Standard? Notes Coat Hook ABS Light Grey 0300139 ✓ Standard for Award ABS Fittings Coat Hook 65mm Brushed Stainless Steel 19mm MFC/HPL: CH65T 13mm SGL: CH65SG ✘ Coat Hook 30mm Brushed Stainless Steel 19mm MFC/HPL: CH30T 13mm SGL: CH30SG ✓ Standard for Award Alu Fittings Requires 1 tube of glue per 50 hooks - 0444006 Coat Hook 90mm Brushed Stainless Steel 19mm MFC/HPL: CH90T 13mm SGL: CH90SG ✘ Toilet Roll Holder ABS Light Grey 0300303 ✓ Standard for Award ABS Fittings Toilet Roll Holder Brushed Stainless Steel 0302509 ✘ Lockable Toilet Roll Holder ABS Light Grey 0300403 ✓ Standard for Award ABS Fittings Double Toilet Roll Holder Brushed Stainless Steel 0302510 ✘ Lockable Toilet Roll Holder Satin finish zinc 0380074N ✓ Standard for Award Alu Fittings Jumbo Roll Holder Brushed Stainless Steel 0302500 ✘ Pull Handle Pair Satin Anodised Aluminium 225mm: 0182227 ✓ *Rose set is optional extra, allow 2 rose sets per handle pair Pull Handle Pair Brushed Stainless Steel 225mm: 0182218 ✘ *Rose set is optional extra, allow 2 rose sets per handle 400mm: 0182226 ✘ 400mm: 0182232 ✘ pair Pull Handle Single Satin Anodised Aluminium 225mm: 0182222 ✘ *Must be supplied with rose set or bolt through disc set Pull Handle Single Brushed Stainless Steel 225mm: 0182221 ✘ *Must be supplied with rose set or bolt 400mm: 0182225 ✘ 400mm: 0182216 ✘ through disc set Pull Handle Rose Set Satin Anodised Aluminium 0182231 ✘ Pull Handle Rose Set Brushed Stainless Steel 0182230 ✘ Pull Handle Bolt Through Disc Set Aluminium 0182229 ✘ Pull Handle Bolt Through Disc Set Brushed Stainless Steel 0182228 ✘