Masplas Product Library - December 2023 Page 1 Masplas Product Library December 2023
Masplas Product Library - December 2023 Page 2 Aluminium Spacer Used on ADD Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued TT 0164089 ALUMINIUM SPACER BLANK 16x130x2.5mm STD £1.23 2000 0 2000 £2,460.00 221 9 2653 Aug-23
Masplas Product Library - December 2023 Page 3 Push Fit Clip - Female Used on Vanities and Ducting Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued TT 0182053 UNIVERSAL PUSH FIT CLIP FEMALE 652035 STD £0.07 2500 0 2500 £180.00 1335 2 16024 Oct-23 IC 0182053 UNIVERSAL PUSH FIT CLIP FEMALE 652035 STD £0.07 9430 5000 14430 £1,038.96 5216 3 62597 Dec-23
Masplas Product Library - December 2023 Page 4 Push Fit Clip - Male Used on Vanities and Ducting Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued TT 0182054 UNIVERSAL PUSH FIT CLIP MALE 652040 STD £0.10 7500 0 7500 £757.50 1459 5 17510 Oct-23 IC 0182054 UNIVERSAL PUSH FIT CLIP MALE 652040 STD £0.10 16085 1500 17585 £1,776.09 6145 3 73740 Dec-23 29.20 25 R1 25 5 R1 75° 39.50 50 15 R5 R2.50 5.25 A A 1.30 6.70 25 21 R3 R8.20 R7.70 15.20 10.8 11 7 4.50 4 2.50 R0.50 24 15 13.70 2.6 4 R1 R2.50 9.3 R0.50 0.30 SECTION A-A Notes:- Part weight 7.10 grams 185 185-117 Male push fit clip 22.10.14 Polycarbonate C Black Rev A - Edge to slot centre changed from 15.5mm to 15mm. Rev B -Profile cuts increased to 5mm to aid tooling. Rev C -Radius changed from 4.5 to 5mm B C D 1 2 A 1 2 3 4 B A 5 6 SCALE:1:1 SHEET 1 OF 1 A4 C WEIGHT: RS Building Products LTD PROJECT Company: TITLE: NEW PRODUCT DEVELOPMENT REVISION MATERIAL: FINISH: DS NAME DATE Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly IMPORTANT - DO NOT SCALE THIS DRAWING This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. 3 D APPV'D DRAWN DWG NO.
Masplas Product Library - December 2023 Page 5 Coat Hook Gasket Used on Sylan Glass Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0203003B 20MM COAT HOOK GASKET 276-049 BLACK STD £0.13 379 0 379 £47.75 0 0 Jul-21 IC 0203003W 20MM COAT HOOK GASKET 276-049 WHITE STD £0.13 601 0 601 £75.73 1 849 8 Mar-23 24.20 20.50 9.00 A A SECTION A-A R0.50 R0.30 0.70 1.00 2.00 DETAIL B SCALE 20 : 1 239 Project No 27/06/19 AP - Change height to 2mm - Coat hook gasket 20mm Gasket ABS Black RAL9005 / White RAL9003 239-009 B AP BT 24/06/19 5:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A - - Change ID to 9mm Revision B Date 31/07/19 Initials AP Comments
Masplas Product Library - December 2023 Page 6 Fascia & Coat Hook Surround Used on Sylan Glass Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0203011B FACIA & HOOK SURROUND BLACK 239-010B STD £0.13 182 0 182 £22.93 7 26 84 Mar-23 IC 0203011W FACIA & HOOK SURROUND WHITE 239-010B STD £0.13 907 0 907 £114.28 10 94 116 Sep-23 53.25 50.50 7 120° 120° 4 A A B SECTION A-A R0.50 R0.30 1 0.70 2 DETAIL B SCALE 10 : 1 0203011W - 0203011B Project No 27/06/-19 AP - Change height from 1.94mm to 2mm - Extrude cut diameter to 50.5mm 239 50mm Coat hook/ facia gasket ABS Black RAL9005 / White RAL9003 B BT 10/08/17 2:1 Comments Revision Date Initials CONSTRUCTION NOTES and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager C 239-010 BT
Masplas Product Library - December 2023 Page 7 Slimline Mortise Lock Assembly Used on 36mm and 44mm doors Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0255002 SLIMLINE MORTISE ASSEMBLY & KEEP INSERT STD £7.11 2451 0 2451 £17,426.61 400 6 4799 Dec-23 69 E E 75.00 11.00 DETAIL B SCALE 6 : 1 DETAIL C SCALE 3 : 1 SECTION E-E SCALE 2 : 1 ITEM NO. PART NUMBER DESCRIPTION Default/QTY. 1 255-002 Mortise case Mortice case 1 2 255-003C Mortice bolt Mortice Bolt 1 3 255-007B Mortice cover plate Mortice cover plate 1 4 255-005 mortice face plate 1 5 255-004D Gear 1 6 FLATCKT 2.5x8x5.4-type IA-D-S 4 D E F C 1 2 3 4 B A 1 2 3 5 C D 4 6 7 8 A B B Mortice lock assembly RS Building Prouducts LTD B.T 30/05/18 40% glass filled nylon/ Stainless steel SCALE:1:1 SHEET 1 OF 1 A3 DWG NO. REVISION 255 MATERIAL: NAME DATE This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. FINISH: IMPORTANT - DO NOT SCALE THIS DRAWING APPV'D DRAWN TITLE: PROJECT Company: 5 WEIGHT: NEW PRODUCT DEVELOPMENT Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.armitage-venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly E
Masplas Product Library - December 2023 Page 8 Pedestal Body 150mm £4.07 0262090 Pedestal Body 100mm £2.82 0262080 Pedestal Body 50mm £2.63 0262070 Pedestal Body 229mm (9”) £4.84 0262100 Reducer for 13mm £0.18 0334182 Pedestal Head 13/18mm £6.54 0262010 20mm Pedestal Head 13/18mm £5.41 0262014 Pedestal Head 35/44mm £4.20 0262020 20mm Pedestal Head 35/44mm £3.05 0262015 Pedestal Base Venesta £4.49 0262061 Pedestal Base Bushboard £4.49 0262050 Pedestal Base TBSA £4.49 0262040 20mm Pedestal Base Venesta £40.05 0262011 20mm Pedestal Base Bushboard £3.95 0262013 20mm Pedestal Base TBSA £3.78 0262012 Washer £0.02 0701140 Screw £0.08 0700030 Pedestal Body 50mm £2.63 0262070 Pedestal Head 13/18mm £6.54 0262010 Pedestal Base Venesta £4.49 0262061 Washer £0.02 0701140 Screw £0.08 0700030 Venesta 50mm Assembly Example 0262401 £13.74 Modular Pedestal Components Modular Pedestal Components
Masplas Product Library - December 2023 Page 9 Modular Pedestal Non-Insert Head Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262010 MOD PED HEAD 262-001C NON-INSERT SS STD £6.54 177 0 177 £1,157.58 115 2 1374 Dec-23 D SECTION D-D D 4 30 4 5 11 Ø6 19.5 12 2.5 62 Ø6 0.25 x 45° CHAMFER Ø18 28 12 8 19.5 Ø32 R5 To match OD of St. Stl. tube TO MATCH OD OF ST. STL. TUBE Ø28.99 28 0.25 x 45° CHAMFER SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Standard Pedestal Top MANUFACTURING 00000 262-001 C / Cliff Brown 12/6/18 1:1 Revision Date Initials Comments A 12/6/18 Initial trial for sample manufacture - - MATERIAL:- GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH Revision Date Initials Comments B 12/6/18 Finish now 320 grit, spigot length increased, diameter revised to suit thicker wall tube of pedestal leg B B B B Revision Date Initials Comments C 19/11/20 Opening increased to 19.5mm. To suit new board material width. C
Masplas Product Library - December 2023 Page 10 Modular Pedestal 20mm Base - Venesta Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262011 20MM MOD PED BASE 262-048E VEN & EXP SS STD £4.05 306 0 306 £1,239.30 17 18 200 Nov-23 THREADED BASE Ø50 Hole & thread to suit threaded head B B SECTION B-B Seen part Seen part 18 11 3 4 Ø50 5 6 EXPORT / VENESTA M32 FINE THREAD Ø32.5 +0.5 -0 LUBRICANT TO APPLIED TO INTERNAL THREAD CSK to suit NO.10 screw A Dimension increase to accomodate CSK. B Ø5.5 THRU ALL Ø10.5 x 90° C E Masked off area Thread to be masked off for non-standard colour finishes RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Venesta/Export 20mm Pedestal base MANUFACTURING 262-048 D / Ben Tabbitt 09/07/19 1:1 Revision Date Initials Comments A 12/09/2019 RB Dimension changes. To allow for a CSK to suit NO.10 in base - Revision Date Initials Comments B 10/12/2019 RB M32 fine thread to suit Head Revision Date Initials Comments C 16/04/2020 RB CSK dimensions added Revision Date Initials Comments D 22/04/2020 RB Reduced to 33mm to close gap Revision Date Initials Comments E 25/06/2020 RB Dimension reduced to 32.5mm to match range
Masplas Product Library - December 2023 Page 11 Modular Pedestal 20mm Base - TBSA Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262012 20MM MOD PED BASE 262-055D TBSA SS STD £3.78 24 200 224 £846.72 21 11 254 Nov-23 CSK to suit NO.10 screw Hole & thread to suit threaded head B B M32 FINE THREAD Ø38 Ø50 3 4 5 6 18 11 SECTION B-B TBSA 5 +0.5 Ø32.5 -0 B B Ø5.5 THRU ALL Ø10.5 x 90° D Masked off area RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By 20mm Base TBSA TBSA 20mm pedestal base MANUFACTURING 262 262-055 D / Ryan Burgess 07/01/2020 1:1 Revision Date Initials Comments A 07/01/2020 RB 20mm Pedestal drawn to suit TBSA - - GRIT FINISH Revision Date Initials Comments B 16/04/2020 RB Drawing mistake rectified, 35mm hole, M32 thread. Re-drawn to match Venesta detail (262-048) CSK dimensions added Revision Date Initials Comments C 22/04/2020 RB Dimension reduced to 33mm to reduce gap Revision Date Initials Comments D 25/06/2020 RB Dimension reduced to 32.5mm to match range
Masplas Product Library - December 2023 Page 12 Modular Pedestal 20mm Base - BB Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262013 20MM MOD PED BASE 262-054E BUSHBOARD SS STD £3.95 58 0 58 £229.10 8 7 98 Nov-23 CSK to suit NO.10 screw Hole & thread to suit threaded head B B M32 FINE THREAD Ø42 +0.5 -0 Ø50 3 4 5 6 18 11 SECTION B-B BUSHBOARD 5 2 Ø32.5 C C Ø5.5 THRU ALL Ø10.5 x 90° E Masked off area RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By 20mm Base bushboard Bushboard 20mm pedestal base MANUFACTURING 262 262-054 E / Ryan Burgess 07/01/2020 1:1 Revision Date Initials Comments A 07/01/2020 RB 20mm Pedestal drawn to suit BB - - MATERIAL: GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH Revision Date Initials Comments B 07/01/2020 RB 20mm Pedesta re-drawn to suit BB base family - - Revision Date Initials Comments C 16/04/2020 RB Drawing mistake rectified, 35mm hole, M32 thread. Re-drawn to match Venesta detail (262-048) CSK dimensions added Revision Date Initials Comments D 22/04/2020 RB Dimension reduced to 33mm to reduce gap Revision Date Initials Comments E 25/06/2020 RB Dimension reduced to 32.5mm to match range
Masplas Product Library - December 2023 Page 13 Modular Pedestal 20mm Non-Insert Head Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262014 20MM MOD PED HEAD 262-049G NON-INSERT SS STD £5.41 192 0 192 £1,038.72 37 5 444 Nov-23 D SECTION D-D D 6 9 4 5 11 Ø6 19.5 12 2.5 43 Ø6 Ø18 28 12 6 19.5 Ø32 R5 32mm (TO MATCH OD OF ST. STL. TUBE 262-007) M32 Fine Thread 28 C Reduced size to accomodate for changes in the base. D E 15 9 43 F F G G RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Venesta/Export 20mm Pedestal Head MANUFACTURING 262-049 G / Ben Tabbitt 09/07/19 1:1 Revision Date Initials Comments A 12/09/2019 RB Dimesnions reduced to suit the changes in the base. (See 262-048) - STAINLESS STEEL WITH 320 GRIT FINISH Revision Date Initials Comments D 10/12/2019 RB M32 fine thread to suit Base (See 262-048) Revision Date Initials Comments E 07/01/2020 RB Reduced by 1mm to suit packer. Revision Date Initials Comments F 20/04/2020 RB Corrected the drawing issues. Elevations now correct. O.D. given a clear dimension. Revision Date Initials Comments G 20/04/2020 RB Opening increased to 19.5mm (0.5mm) to suit new board material.
Masplas Product Library - December 2023 Page 14 Modular 20mm Pedestal Insert Head Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262015 20MM MOD PED HEAD 262-050B INSERT SS STD £3.05 268 0 268 £817.40 9 30 107 Nov-23 2 x 45° 5 9 32 15 2 x Pilot drill Ø3.5 thro drill & tap M5 to depth of 12mm min. from top face A A 16 Reduced size to accomodate for changes in the base. 44 10 28 R5 14.5 15 14.5 2 x Thro holes Ø5.5, CSK to suit M5 CSK HD machine screw 20% Glass filled black nylon B M32 Fine Thread MASKED OFF AREA FOR NON -STANDARD COLOUR FINISHES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Venesta/Export 20mm Pedestal INSERT Head MANUFACTURING 262-050 B / Ben Tabbitt 09/07/19 1:1 Revision Date Initials Comments A 12/09/2019 RB Dimensions reduced to suit changes in the base. (See 262-048) Revision Date Initials Comments B 10/12/2019 RB M32 fine thread to suit Base (See 262-048)
Masplas Product Library - December 2023 Page 15 Modular Pedestal Insert Head Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262020 MOD PED HEAD 262-002B INSERT SS STD £4.20 528 0 528 £2,217.60 54 10 648 Nov-23 4 3034 1 32 15 2 x Pilot drill Ø3.5 thro drill & tap M5 to depth of 12mm min. from top face 3 x 45° 44 10 28 R5 14.5 15 14.5 2 x Thro holes Ø5.5, CSK to suit M5 CSK HD machine screw 20% Glass filled black nylon 0.25 x 45° CHAMFER Ø28.99 0.25 x 45° CHAMFER MASKED OFF AREA FOR NON -STANDARD COLOUR FINISHES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Pedestal Top (for insert board) MANUFACTURING 00000 262-002 B / Cliff Brown 12/6/18 1:1 Revision Date Initials Comments A 12/6/18 - - - B B Revision Date Initials Comments B 13/11/18 CB Spigot length increased to 30mm, dia of spigot revised to suit thicker wall pedestal leg tube, finish now 320 grit
Masplas Product Library - December 2023 Page 16 System M Pedestal Base Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262031 SYSTEM M MOD PED BASE 262-031rC STD £8.70 19 0 19 £165.30 14 1 168 Nov-23 50 M18 54 20 1.54.32.52.2 30 34 R5 45.7 20 19 3 6 CSK No.10 SCREW Ø22 Ø50 Ø34 CSK TO SUIT No.10 SCREW Ø6 TRHOUGH HOLE Ø5 THROUGH HOLE x2 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal Base PRELIMINARY 262 262-031 C Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments B 26/03/19 JL Ped to include 2 outer fixing and internal fixing - - Revision Date Initials Comments C 05/07/19 BT Confirmed for manufacture - -
Masplas Product Library - December 2023 Page 17 System M Pedestal Body 230mm Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262033 SYS M MOD PED BODY FOR 230MM LEG 262-033 STD £4.49 64 0 64 £287.36 0 0 Nov-23 193.5 24 M18 217.5 40 Ø18 Ø15 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal Leg 9inch (230mm) PRELIMINARY 262 262-033 B Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments A 25/03/19 JL - - - SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES Revision Date Initials Comments B 05/07/19 BT - Dimensions changed - Drawing approved for manufacture -
Masplas Product Library - December 2023 Page 18 System M Pedestal Body 150mm Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262034 SYS M MOD PED BODY FOR 150MM LEG 262-034 STD £4.92 89 0 89 £437.88 11 8 127 Nov-23 137.5 Ø18 Ø1524 M18 113.5 40 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal Leg 150mm PRELIMINARY 262 262-034 B Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments A 25/03/19 JL - - - Revision Date Initials Comments B 05/07/19 BT - Dimensions changed - Drawing approved for manufacture - Material: Stainless Steel
Masplas Product Library - December 2023 Page 19 System M Pedestal Body 100mm Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262035 SYS M MOD PED BODY FOR 100MM LEG 262-035 STD £3.25 39 0 39 £126.75 3 12 40 Nov-23 87.5 Ø18 Ø1563.5 24 M18 40 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal Leg 100mm PRELIMINARY 262 262-035 B Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments A 25/03/19 JL - - - Revision Date Initials Comments B 05/07/19 BT - Dimensions changed - Drawing approved for manufacture -
Masplas Product Library - December 2023 Page 20 System M Pedestal Non-Insert Head Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262036 SYS M MOD PED NON INSERT HEAD 262036B STD £8.40 187 0 187 £1,570.80 3 73 31 Nov-23 DIERCTION BRUSHING WELD TO BE APPLIED TO INTERNAL DIAMETER EDGE OF PLATE & SPIGOT 1.5mm STAINLESS STEEL BENT AND WELDED L-PLATES MOVING PLATE, SLIDES ON PEDESTAL LEG WELDED FIXED PLATE 1 37 14.7 10 29 30 Ø10 24 Ø14.7 ALLOW FOR CLEARNACE TOLERANCE ON SPIGOT TO FIT INTO TUBE 26 78.5 104.5 13 30 35 13.5 12.5 40 Ø19.5 Ø3 Ø10 Ø10 22.5 77 99.5 13 30 34 12.5 10 40 Ø10.15 Ø10 Ø10 Ø26 78 Ø26 R296 R296 27 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal head Airport A Pedestal head for 230/150mm tube PRELIMINARY 262 262-036 B Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments A 25/03/19 JL - - - and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES Revision Date Initials Comments B 05/07/19 BT - Dimensions changed - Drawing approved for manufacture -
Masplas Product Library - December 2023 Page 21 System M Pedestal Insert Head Used on System M Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262038 SYSTEM M MOD PED INSERT HEAD 262-038 STD £8.24 20 0 20 £164.80 11 2 137 Nov-23 4mm STAINLESS STEEL BENT AND WELDED L-PLATES 30 1 37 14.7 10 Ø10 Ø14.7 ALLOW FOR CLEARNACE TOLERANCE ON SPIGOT TO FIT INTO TUBE DIERCTION BRUSHING 41.5 1.5 25 2 5 11 33.5 Ø10 Ø25 Ø3 Ø30 Ø10.15 61.5 17 30.75 22 4 4.2 15 WELD TO BE APPLIED TO INTERNAL DIAMETER EDGE OF PLATE & SPIGOT 27 19 41.5 R2 R0.5 1.5 4 3232 3 D RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By Airport Modular Pedestal - Pedestal head Standard Pedestal head for all tubes PRELIMINARY 262 262-038 D Martin Rees Jakub Lepczak 25/03/19 1:1 Revision Date Initials Comments A 25/03/19 JL - - - Revision Date Initials Comments B 05/07/19 BT - Dimensions changed - Drawing approved for manufacture - Revision Date Initials Comments C 31/07/19 AP - Adjust distance between centre of hole and bottom from 35mm to 35.5mm - Revision Date Initials Comments D 04/09/19 RB - Adjust distance between centre of hole and bottom from 35.5mm to 33.5mm to bring the pedestal drilling inline with other heads
Masplas Product Library - December 2023 Page 22 Modular Pedestal Base TBSA Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262040 MOD PED BASE 262-026C TBSA SS STD £4.49 9 200 209 £938.41 36 6 433 Dec-23 THREADED BASE Hole & thread to suit tube B B SECTION B-B Seen part Seen part Seen part Thread to be masked off for non-standard colour finishes 3025 2 3 Ø38 M32 FINE THREAD Ø12 Ø32.5 +0.5 -0 TBSA 14 11 6 50 LUBRICANT TO APPLIED TO INTERNAL THREAD Ø12 Masked off area RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - TBSA Pedestal Base MANUFACTURING 262-026 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL Undercut added, thread depth changed - - Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. -
Masplas Product Library - December 2023 Page 23 Modular Pedestal Base BB Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262050 MOD PED BASE 262-027C BUSHBOARD SS STD £4.49 111 0 111 £498.39 22 5 268 Dec-23 THREADED BASE Hole & thread to suit tube B B SECTION B-B Seen part Seen part Thread to be masked off for non-standard colour finishes 3025 3 Ø36 Ø12 14 11 BUSHBOARD 5 17 8 2 M32 FINE THREAD Ø32.5 +0.5 -0 Ø45 LUBRICANT TO APPLIED TO INTERNAL THREAD Ø12 Masked off area RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Bushboard Pedestal Base MANUFACTURING 262-027 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL Undercut added, thread depth changed - - Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. -
Masplas Product Library - December 2023 Page 24 Modular Pedestal Head for Glass Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262059 MOD PED HEAD FOR GLASS PARTS A&B 262059A NON £17.50 3 0 3 £52.50 0 0 May-21 4 30 12 2.5 62 0.25 x 45° CHAMFER Ø32 To match OD of St. Stl. tube TO MATCH OD OF ST. STL. TUBE 28 Part A 22.5 9.5 6.5 Modular Glass Pedestal Head 8 2.5 M6 x 8mm 9.5 R0.1 7 11Ø7 28 12 Modular Glass Pedestal Head Part B 12 2.5 C/Bore to suit M6 Socket cap head RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Modular Pedestal Head for Glass panels MANUFACTURING 00000 262-059 A Martin Rees Ryan Burgess 30/03/2021 NTS Revision Date Initials Comments A 00/00/00 -- - - 262-059 Pedestal head to suit Glass panels
Masplas Product Library - December 2023 Page 25 Modular Pedestal Base Venesta Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262061 MOD PED BASE 262-020C VEN & EXPORT SS STD £4.49 439 0 439 £1,971.11 91 5 1087 Nov-23 THREADED BASE Ø50 Hole & thread to suit tube B B SECTION B-B Seen part Thread to be masked off for non-standard colour finishes Seen part 3025 3 2 Ø50 Ø12 14 11 EXPORT / VENESTA M32 FINE THREAD Ø32.5 +0.5 -0 LUBRICANT TO APPLIED TO INTERNAL THREAD Ø12 Masked off area RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Venesta/Export Pedestal base MANUFACTURING 262-020 B / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL Undercut added, thread depth changed - - Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. -
Masplas Product Library - December 2023 Page 26 Modular Pedestal Used on Various assemblies Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0262070 MOD PED BODY 262-021C FOR 50MM LEG SS STD £2.63 128 400 528 £1,388.64 66 8 790 Nov-23 IC 0262080 MOD PED BODY 262-022C FOR 100MM LEG SS STD £2.82 178 0 178 £501.96 64 3 768 Dec-23 IC 0262090 MOD PED BODY 262-023C FOR 150MM LEG SS STD £4.07 88 0 88 £358.16 9 10 108 Nov-23 IC 0262100 MOD PED BODY 262-024C FOR 9” LEG SS STD £4.84 71 0 71 £343.64 14 5 171 Nov-23 IC 0262101 MOD PED BODY 262-060 FOR 12” LEG SS NON £7.58 64 0 64 £485.12 3 20 38 Nov-23 4426 18 M32 FINE THREAD TO OUTSIDE OF TUBE Ø29.05 33 Ø32 0.25 x 45° CHAMFER 32 OD ST. STL. TUBE X 2mm WALL THICKNESS Masked off area External thread to be masked off for nonstandard colour finishes SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Pedestal leg - 50mm MANUFACTURING 262-021 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL O/all length adjusted, thread depth changed - - MATERIAL:- GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH B Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. - 76 18 94 32 OD ST. STL. TUBE X 2mm WALL THICKNESS Ø29.05 Ø32 M32 FINE THREAD TO OUTSIDE OF TUBE 33 0.25 x 45° CHAMFER Masked off area External thread to be masked off for nonstandard colour finishes SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Pedestal leg - 100mm MANUFACTURING 262-022 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL O/all length adjusted, thread depth changed - - MATERIAL:- GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH B Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. - 18 144 32 OD ST. STL. TUBE X 2mm WALL THICKNESS Ø29.05 Ø32 M32 FINE THREAD TO OUTSIDE OF TUBE 33 0.25 x 45° CHAMFER Masked off area External thread to be masked off for nonstandard colour finishes SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Pedestal leg - 150mm MANUFACTURING 262-023 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL O/all length adjusted, thread depth changed - - MATERIAL:- GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH B Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. - 18 224 32 OD ST. STL. TUBE X 2mm WALL THICKNESS Ø29.05 Ø32 M32 FINE THREAD TO OUTSIDE OF TUBE 33 0.25 x 45° CHAMFER Masked off area SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - Pedestal leg - 230mm MANUFACTURING 262-024 C / Jakub Lepczak 21/03/19 1:1 Revision Date Initials Comments B 21/03/19 JL O/all length adjusted, thread depth changed - - MATERIAL:- GRADE 304 STAINLESS STEEL WITH 320 GRIT FINISH B Revision Date Initials Comments C 24/06/2020 RB Thread size changed to M32 fine thread to suit rest of parts. - 18 299 32 OD ST. STL. TUBE X 2mm WALL THICKNESS Ø29.05 Ø32 M32 FINE THREAD TO OUTSIDE OF TUBE 33 0.25 x 45° CHAMFER Masked off area External thread to be masked off for nonstandard colour finishes
Masplas Product Library - December 2023 Page 27 Modular Pedestal SGL Reducer Used on Modular pedestal Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334182 PED GASKET FOR SGL 262-003A STD £0.18 1762 0 1762 £317.16 54 33 651 Dec-23 19.1 (To match pedestal head) 3.05 13 1 2 17.4 29.75 R6 Ø7.5 25.5 3.25 1 17.4 19.1 R16 R8.7 32 9.55 16 11.75 12.75 RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - - SGL Packer (Insert for SGL boards) MANUFACTURING 00000 262-003 / Ryan Burgess 29/11/18 1:1 finish. Revision Date Initials Comments A 19/11/20 Overall width increased to 19.1mm (+0.5mm) To suit Pedestal head (262-001) revision C A A
Masplas Product Library - December 2023 Page 28 Evolution End Cap Used on Evolution Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0267104 RH HEADRAIL END CAP EVO SILVER -274-002 STD £0.14 934 0 934 £131.69 1 1509 7 Sep-23 IC 0267106 LH HEADRAIL END CAP EVO SILVER - 274-003 STD £0.14 940 0 940 £132.54 1 1518 7 Sep-23 4 4 4 2.50 1.50 1 0.25 1 1 1 R4.68 R6.13 R10.49 1.50 1 1 R0.50 D 73.74 13.50 2.50 70.74 1 1.50 10 2 69.74 22.14 2.50 10 2° 1.50 R9.49 R144.80 R0.50 R4 7.25 R143.30 R147.74 R149.24 7.39 R6.13 1 2.02 2.02 2.50 1 63.25 R1.50 21.77 30.19 1.50 27.19 1.50 12.50 5 26.19 2 1 2.50 1 2.50 1 R0.50 DETAIL D SCALE 5 : 1 1 2 3 4 1 2 3 5 C D 4 6 7 8 A B Evo end cap RH RS Building Prouducts LTD Ryan Burgess 14/11/2018 SAA matched LDPE SCALE:1:1 SHEET 1 OF 1 A3 DWG NO. REVISION 274 TBS-A Endcaps MATERIAL: NAME DATE This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. FINISH: IMPORTANT - DO NOT SCALE THIS DRAWING APPV'D DRAWN TITLE: PROJECT Company: 5 WEIGHT: NEW PRODUCT DEVELOPMENT Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.armitage-venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly E 274-002
Masplas Product Library - December 2023 Page 29 Modular Indicator Bolt Fascia Assembly Used on 44mm flush cubicles Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276000A MOD IND BOLT FRONT BODY ASSEMBLY TBS AMW STD £4.16 176 0 176 £732.16 5 38 56 Dec-23 IC 0276000B MOD IND BOLT FRONT BODY ASSEMBLY BB STD £4.16 66 0 66 £274.56 3 26 31 Dec-23 IC 0276000V MOD IND BOLT FRONT BODY ASSEMBLY VENESTA STD £4.16 41 250 291 £1,210.56 97 3 1160 Nov-23 TBSA BB VEN
Masplas Product Library - December 2023 Page 30 Modular Indicator Bolt Fascia Only Used on 44mm flush cubicles 70.00° R1.50 R8.50 R20.00 10.50 35.00° A A 3.50 3.50 9.00 49.50 48.95 47.00 1.75 9.00 2.00 3.20 6.05 7.65 45.50 46.7 49.5 SECTION A-A Masked off area Seen Face Seen Face Internal masked off for non-standard colour finishes 0.25 X 45.00° 1.25 2.00 2.00 0.75 1.40 1.20 DETAIL D SCALE 5 : 1 1.60 1.35 5° DETAIL E SCALE 5 : 1 276 Project No 29/07/21 AP - Reduced slot from 76 degree to 7 degree window - Modular Indicator Bolt Front Body VEN Stainless Steel Brushed 276-010V C AP Martin Rees 04/06/21 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A B - ID changed from 47.25mm to 47mm Comments Revision 23/06/22 - Date Initials BT Revision Date 11/07/22 Initials AP Comments - Dimension from undercut to back of part reduced from 1.55mm to 1.35mm C Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276200 MOD IND SS FRONT BODY VEN 276-010VrC NON £2.12 49 0 49 £103.88 17 3 201 Oct-23 IC 0276200B MOD IND SS FRONT BODY BB 276-010BrB NON £2.12 5 0 5 £10.60 1 4 16 Oct-23 10.50 13.00 14.50 A A 3.50 3.50 9.00 49.50 48.95 47.00 1.75 9.00 2.00 3.20 6.05 7.65 45.50 46.7 49.5 SECTION A-A Internals masked off for non-standard colour finishes 0.25 X 45.00° 1.25 2.00 2.00 0.75 1.40 1.20 DETAIL D SCALE 5 : 1 1.60 1.35 5° DETAIL E SCALE 5 : 1 Masked off area 276 Project No 23/06/22 - ID changed from 47.25mm to 47mModular Indicator BFront Body BUSH Stainless Steel Brushed 276-010B B AP Martin R04/06/21 2:1 Comments Revision Date ICONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Buildand is protected by the Design Copyright Actnot be copied or otherwise reproduced withowritten consent of RS Building Products Ltd. Approved BScale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin ReProject ManA Revision B Date IComments - Dimension from undercut to back reduced from 1.55mm to 1.35mm 11/07/22 VEN BB
Masplas Product Library - December 2023 Page 31 Modular Indicator Bolt Emergency Release Key Used on 44mm flush cubicles Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276002 EMERGENCY RELEASE KEY TRI-DRIVE 276-072A STD £0.27 953 0 953 £252.55 6 152 75 Dec-23 12.50 120.00° D D R1.15 2.30 2.50 R6 DETAIL C SCALE 10 : 1 2.75 R0.50 4.00° 84.00° R3.00 4.00° SECTION D-D 2.20 2.15 2.50 0.25 2.30 DETAIL E SCALE 10 : 1 276 Project No 17/12/21 BT - Tri-Drive design changed - Design changed to match Modular Indicator Bolt Security Emergency Release Nylon Yellow 276-072 A Adam Pegg MR 04/11/21 5:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A
Masplas Product Library - December 2023 Page 32 Modular Indicator Bolt Rear Body Assembly Used on 44mm flush cubicles Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276001 MOD IND BOLT REAR BODY ASSY & LOOSE ITMS STD £10.59 151 0 151 £1,599.09 88 2 1055 Nov-23
Masplas Product Library - December 2023 Page 33 Modular Indicator Bolt Rear Body Used on 44mm flush cubicles Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276201 MOD IND SS REAR BODY 276-004 NON £2.72 39 0 39 £106.08 19 2 232 Oct-23 49.50 16.20 A A 45.50 47.50 SECTION A-A Masked off area 49.50 29.00 12.10 11.25 Seen Face Seen Face Internal masked off for nonstandard colour finishes 1.00 2.00 0.25 0.25 1.00 1.20 1.00 DETAIL B SCALE 4 : 1 1.30 1.60 1.60 1.10 0.25 0.25 DETAIL C SCALE 4 : 1 276 Project No --/--/-- -- - - Modular Indicator Bolt Rear Body Stainless Steel Brushed 276-004 - Adam Pegg MR 14/07/21 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager -
Masplas Product Library - December 2023 Page 34 Modular Indicator Bolt Handle Used on 44mm flush cubicles Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0276202 MOD IND SS HANDLE 276-001 NON £1.08 41 0 41 £44.28 19 2 232 Oct-23 40.00 12.00 10.00 1.00 X 45° 6.00 3.00 M5 Thread to suit insert. Masked off area Loctite to be applied during assembly 5.00 Seen Face Seen Face Thread masked off for non-standard colour finish Project No 13/06/19 BT - M6 thread redused to M4 to suit other inserts - Handle lenght reduced by 5mm 276 Modular indicator bolt £0.94 Stainless steel Machined 276-001 D BT 06/02/19 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A Revision B Date Initials Comments - Handle length reduced by 5mmto 40mm 12/02/20 RB 08/10/20 RB - M4 thread changed to M5 to increase strength Comments Revision C Date Initials Revision D Date Initials Comments - Shoulder added to join thread and main body to increase strength 14/07/21 AP Date Comments Revision E 12/12/22 Initials BT - Notes added onto drawing -
Masplas Product Library - December 2023 Page 35 Cleaners Sink Foot Insert Used on Cleaners sink Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0290001 CLEANERS SINK FOOT INSERT 290-001rC STD £1.47 268 0 268 £393.96 61 4 735 Nov-23 20.00 16.50 22.00 1.00 A A 6.60 22.00 11.00 10.00 20.00 10.00 11.00 2.00 6.60 SECTION A-A 290 Project No 15/05/19 BT - Fixing hole changed to CSK - Details amended to suit top + bottom fixing app Cleaners sink Foot insert Stainless Machined 290-001 C BT -- 01/04/19 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A B - Hole changed from 12mm to 11mm Revision Date 15/05/19 Initials BT - Comments Revision C 12/06/19 - - Diam of shaft redused by 0.2mm to 16.5mm Initials BT Comments Date
Masplas Product Library - December 2023 Page 36 TITLE Used on ADD Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334140 IND SS EXTENSION PIECE 144-023B STD £2.15 355 0 355 £763.25 4 96 45 Nov-23 Material specification - Part to be turned via machining, material to be 316 stainless steel Manufacturing tolerance - +/_ 0.25mm TOP VIEW FRONT VIEW BOTTOM VIEW Ø4.2 11 10 21 ISO VIEW Ø8.5 4.5 4.2 Ø4.5 10 DEEP 10 STATUS PROJECT PROJECT NO. is the property of Venesta Washroom Systems Ltd and is protected by Copyright Act 1968. It should not be copied or otherwise reproduced the express written consent of Venesta Washroom Systems Ltd. PORTANT - DO NOT SCALE THIS DRAWING ow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly Rev C: Rev B: Part reduced in size by 4mm (previous design did not work with 18mm doors, it created a 22mm space) Rev A: Missing diameter dim added RS Building Products Telephone 01782 277200 Facsimile 01782 657386 DRG NO SCALE DRAWN BY TITLE Alderflat Drive Newstead Industrial Estate Trentham Stoke on Trent ST4 8HX DATE NEW PRODUCT DEVELOPMENT BUSHBOARD SS HARDWARE 144 144-023 (REV B) NOT TO SCALE ANNA MORROW 01.04.15 MANUFACTURE BUSHBOARD OUTWARD OPENING EXTENSION PIECE (MODIFICATION)
Masplas Product Library - December 2023 Page 37 Fascia Inner Base Used on Flip indicator bolt Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334171 FACIA INNER WITH O-RING 222-222 NON £3.14 495 0 495 £1,554.30 305 2 3660 Dec-23 47.50 9.00 4 x 4.50 THRU 9.00 X 90.00° 19.00 31.40 R3.50 7.00 10.00 A A 2.00 2.75 SECTION A-A 1.00 1.50 R0.20 0.63 2.75 DETAIL D SCALE 10 : 1 O-Ring Specification: 42 x 1,5 NITRILE 70 222 Project No 14/08/19 AP Thickness Changed From 2.6mm to 2.75mm - 222 Fascia Inner Aluminium Mill 222-222 F AG -- 04/09/2015 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager E - F 28/09/20 Initials BT Comments Revision O-Ring specification added Date
Masplas Product Library - December 2023 Page 38 Minima & Fusion Keep 13mm Used on Minima & Fusion 13mm Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334314 222-285D SAA MINIMA KEEP SGL & GLASS STD £3.83 46 0 46 £176.18 11 4 135 Nov-23 44.5 10 15 19.5 Ø11 Ø5 14 16.5 17 3 11 2.5 CSK to suit No.10 Screw Material: Aluminium Finish: Satin anodized Note: All sharps to be removed. 222-285 16.5mm Oval keep A B C R8.5 C D RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - 222 Oval Keep 16.5mm To suit flip indicator MANUFACTURING 222 N/A 222-285 D Martin Rees Ryan Burgess 09/10/2019 1:1 @ A4 Do not scale from this drawing, if in doubt ask. Revision Date Initials Comments A 09/10/19 RB Depth changed from 12mm to 14mm. To bring inline with previous keep, to align drilling. Revision Date Initials Comments B 10/10/19 RB Dimension change to suit outer radius & thru. radius 3.5mm Radius added as per Masplas request Revision Date Initials Comments D 21/10/19 RB 3.5mm radius removed as per masplas request. Revision Date Initials Comments C 14/10/19 RB Width change to suit minima pilaster width.
Masplas Product Library - December 2023 Page 39 Minima & Fusion Keep 19mm Used on Minima & Fusion 19mm Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334315 222-284D SAA MINIMA KEEP HPL STD £3.90 140 0 140 £546.00 6 23 72 Nov-23 44.5 10 15 19.5 Ø11 Ø5 14 19.5 17 3 11 5.5 CSK to suit No.10 Screw Material: Aluminium Finish: Satin anodized Note: All sharps to be removed. 222-284 19.5mm Oval keep A B C R8.5 C D CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - 222 Oval Keep 19.5mm To suit flip indicator MANUFACTURING 222 N/A 222-284 D Martin Rees Ryan Burgess 09/10/2019 1:1 @ A4 Do not scale from this drawing, if in doubt ask. CONSTRUCTION NOTES Revision Date Initials Comments A 09/10/19 RB Depth changed from 12mm to 14mm. To bring inline with previous keep, to align drilling. Revision Date Initials Comments B 10/10/19 RB Dimension change to suit outer radius & thru. radius 3.5mm Radius added as per Masplas request Revision Date Initials Comments D 21/10/19 RB 3.5mm radius removed as per masplas request. Revision Date Initials Comments C 14/10/19 RB Width change to suit minima pilaster width.
Masplas Product Library - December 2023 Page 40 Minima 19mm Outward Keep Used on Minima 19mm Outward Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334316 222-283D SAA MIN KEEP MDF OUTWARD STD £3.55 152 0 152 £539.60 0 0 Jul-22 44.5 10 15 19.5 Ø11 Ø5 14 24.5 17 3 11 10.5 CSK to suit No.10 Screw Material: Aluminium Finish: Satin anodized Note: All sharps to be removed. 222-283 24.5mm Oval keep A B C R8.5 C D CONSTRUCTION NOTES RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - 222 Oval Keep 24.5mm To suit flip indicator MANUFACTURING 222 N/A 222-283 D Martin Rees Ryan Burgess 09/10/2019 1:1 @ A4 Do not scale from this drawing, if in doubt ask. CONSTRUCTION NOTES Revision Date Initials Comments A 09/10/19 RB Depth changed from 12mm to 14mm. To bring inline with previous keep, to align drilling. Revision Date Initials Comments B 10/10/19 RB Dimension change to suit outer radius & thru. radius 3.5mm Radius added as per Masplas request Revision Date Initials Comments D 21/10/19 RB 3.5mm radius removed as per masplas request. Revision Date Initials Comments C 14/10/19 RB Width change to suit minima pilaster width.
Masplas Product Library - December 2023 Page 41 Flush Keep Used on Urban SGL, Unity SGL, Definition SGL, Minima HPL, Fusion HPL Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0334317 222-282D SAA FLUSH KEEP STD £4.24 194 300 494 £2,094.56 140 4 1677 Dec-23 30 3 11 16 44.5 10 15 19.5 Ø11 Ø5 THRU. 14 17 CSK to suit No.10 Screw Material: Aluminium Finish: Satin anodized Note: All sharps to be removed. 222-282 30mm Oval keep A C B R8.5 C D RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Customer / Project Title Status Project No Project Manager Job No Drawing No Revision Date Scale Drawn By - 222 Oval Keep 30mm To suit flip indicator MANUFACTURING 222 N/A 222-282 D Martin Rees Ryan Burgess 09/10/2019 1:1 @ A4 Do not scale from this drawing, if in doubt ask. Revision Date Initials Comments A 09/10/19 RB Depth changed from 12mm to 14mm. To bring inline with previous keep, to align drilling. Revision Date Initials Comments B 10/10/19 RB Dimension change to suit outer radius & thru. radius 3.5mm Radius added as per Masplas request Revision Date Initials Comments C 14/10/19 RB Width change to suit minima pilaster width. Revision Date Initials Comments D 21/10/19 RB 3.5mm radius removed as per masplas request.
Masplas Product Library - December 2023 Page 42 Titan Shoe Fixing Block Used on TItan Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0335050 CUBICLE SHOE FIX BLOCK BLACK HDPE 110121 STD £0.36 1079 0 1079 £388.44 105 10 1265 Dec-23 166.00 83.00 1.95 3.90 82.00 3.90 3.20 14.50 20.50 5.00 14.50 A 10.00 10.00 2° 20.00 4° 1.90 0.95 2.00 DETAIL A SCALE 5 : 1 D E F C 1 2 3 4 B A C D A B Nylon floor fixing block 110 121 RS Building Prouducts LTD RB 25/01/2019 Black HDPE SCALE:1:1 SHEET 1 OF 1 A3 DWG NO. REVISION Titan floor fixing block MATERIAL: NAME DATE This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. FINISH: IMPORTANT - DO NOT SCALE THIS DRAWING APPV'D DRAWN TITLE: PROJECT Company: 5 WEIGHT: NEW PRODUCT DEVELOPMENT Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.armitage-venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly E
Masplas Product Library - December 2023 Page 43 Hinge Cams and Caps Used on Modular Hinge Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0336001 MOD HINGE BOTTOM CAM WITH PIN 294-008 STD £0.79 60 2000 2060 £1,627.40 1120 2 13437 Dec-23 IC 0336002 MOD HINGE LH TOP CAM LT GREY 294-010 STD £0.10 583 2000 2583 £260.88 1011 3 12127 Dec-23 IC 0336003 MOD HINGE RH TOP CAM LT GREY 294-009 STD £0.10 353 2000 2353 £237.65 1007 2 12081 Dec-23 IC 0336004 MOD HINGE END CAP LIGHT GREY 294-007 STD £0.04 254 4500 4754 £175.90 2222 2 26662 Dec-23 IC 0336018 MOD HINGE BLACK BOTTOM CAM W PIN 294-008 NON £0.68 563 0 563 £382.84 28 20 342 Nov-23 IC 0336018U MOD HINGE BRASS BOTTOM CAM W PIN 294-008 NON £0.79 250 0 250 £197.50 2 135 22 Sep-23 IC 0336018Z MOD HINGE BONZE BOTTOM CAM W PIN 294-008 NON £0.68 0 0 0 £- 0 0 No Issues IC 0336019 MOD HINGE BLACK LH TOP CAM 294-010 NON £0.09 638 0 638 £57.42 22 29 262 Nov-23 IC 0336019U MOD HINGE BRASS LH TOP CAM 294-010 NON £0.09 0 0 0 £- 0 0 No Issues IC 0336019Z MOD HINGE BRONZE LH TOP CAM 294-010 NON £0.09 0 0 0 £- 0 0 No Issues IC 0336020 MOD HINGE BLACK RH TOP CAM 294-009 NON £0.09 632 0 632 £56.88 23 28 271 Nov-23 IC 0336020U MOD HINGE BRASS RH TOP CAM 294-009 NON £0.10 250 0 250 £25.25 2 135 22 Sep-23 IC 0336020Z MOD HINGE BRONZE RH TOP CAM 294-009 NON £0.09 0 0 0 £- 0 0 No Issues IC 0336021 MOD HINGE END CAP BLACK 294-007 NON £0.04 1162 0 1162 £46.48 55 21 662 Nov-23 IC 0336021U MOD HINGE END CAP BRASS 294-007 NON £0.04 500 0 500 £18.50 4 135 45 Sep-23 IC 0336021Z MOD HINGE END CAP BRONZE 294-007 NON £0.04 0 0 0 £- 0 0 No Issues IC 0336023 MOD HINGE BOT CAM W/ PIN 294-008 PEARL STD £0.79 647 53 700 £553.00 297 2 3559 Dec-23 IC 0336024 MOD HINGE LH TOP CAM 294-010 PEARL STD £0.10 230 1000 1230 £124.23 158 8 1899 Dec-23 IC 0336025 MOD HINGE RH TOP CAM 294-009 PEARL STD £0.10 646 0 646 £65.25 120 5 1438 Dec-23 IC 0336026 MOD HINGE END CAP 294-007 PEARL STD £0.04 418 1000 1418 £52.47 584 2 7006 Dec-23 35.00 7.00 11.30 10.00 1.00 0.95 R1.5mm Metal guide rod moulded into cam 30.00 1.50 66.50 R1.5mm 10mm rise over 180 degree rotation R7.00 21.00 TRUE R1.00 R8.00 21.00 7.00 45.00° 294 Project No 08/06/20 AP - Ribs extended to bottom on cam - Cam radius reduced to 8mm from 8.1mm Modular Hinge Universal Top Cam Nylon Varied 294-008 C AP MR 10/01/20 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A Revision B Date Initials Comments - Male cam increased from 13mm to 14mm 02/07/20 AP 16/08/22 AP - Male cam face height, increased by 0.3mm Comments Revision C Date Initials 1.50 30.00 21.00 1.00 0.95 7.10 10.80 10mm rise over 0.5 rotation R1.5mm R1.5mm 14.10 21.00 5.00° 7.10 TRUE R1.00 R8.00 294 Project No Modular Hinge RH Top Cam Nylon (self lubricating) 294-009 A AP -- 10/01/20 2:1 CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager Revision A Date Initials Comments - Cam radius reduced to 8mm from 8.1mm - Ribs extended to bottom on cam 08/06/20 AP Revision B Date Initials Comments - Female cam increased from 13.1mm to 14.1mm 02/07/20 AP 12.00 3.00 0.50 0.50 2.00° 20.90 R8.00 R1.00 13.50 45.00° A A 14.00 7.00 SECTION A-A 0.50 90.00° 0.25 DETAIL B SCALE 20 : 1 Project No 18/03/21 AP - 0.5mm V groove added to top face - Modular Hinge Universal end cap POM - Delrin - 294-007 A AP 31/07/2020 2:1 Comments Revision Date Initials CONSTRUCTION NOTES SPECIAL NOTES C This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager A 1.50 30.00 21.00 1.00 0.95 7.10 R8.00 TRUE R1.00 45.00° 21.00 14.10 5.00° 7.10 10.80 10mm rise over 0.5 rotation R1.5mm R1.5mm
Masplas Product Library - December 2023 Page 44 Coat Hook Used on Group SS Coat Hook Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0444001 COAT HOOK BODY 90MM 276-016rC STD £2.66 1481 0 1481 £3,939.46 159 9 1903 Dec-23 IC 0444002 COAT HOOK BASE 50MM 276-035 rev F STD £3.80 121 1500 1621 £6,159.80 706 2 8474 Dec-23 IC 0444003 COAT HOOK FACEPLATE 50MM 276-036rA STD £0.85 167 2000 2167 £1,841.95 707 3 8482 Dec-23 IC 0444004 COAT HOOK BODY 65MM 276-021rC STD £2.34 56 1600 1656 £3,875.04 561 3 6738 Dec-23
Masplas Product Library - December 2023 Page 45 Coat Hook Used on Group SS Coat Hook Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0444007B 30MM COAT HOOK GASKET 276-054A BLACK STD £0.08 977 0 977 £79.14 0 5524 2 Oct-23 IC 0444007W 30MM COAT HOOK GASKET 276-054A WHITE STD £0.08 1000 0 1000 £81.00 0 0 No Issues
Masplas Product Library - December 2023 Page 46 Glass Coat Hook Used on Sylan Glass Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0444008 GLASS COAT HOOK WASHER 276-051B STD £0.52 250 0 250 £130.00 0 0 No Issues IC 0444009 GLASS COAT HOOK BARREL BOLT 276-052D STD £3.12 248 0 248 £773.76 0 1402 2 Oct-23 A A 9.50 4.80 60.00 74.50 30.00 SECTION A-A 30.00 ITEM NO. PART NUMBER DESCRIPTION 65mm/QTY. 1 276-051 Glass washer Glass washer 1 2 276-021 Coathook rod 65mm Coat hook rod 65mm 1 3 276-039 6.2mm buffer 2128 1 4 276-052 Glass barrel bolt Glass barrel bolt 1 5 276-054 30mm glass coat hook gasket 30mm Glass Gasket 2 Project No 07/06/23 BT - Barrel lenght reduced by 1.5mm - Clamping thickness reduced to 9.5mm 276 65mm coat hook Stainless steel/plastic machine 276-050 D BT BT 13/05/19 1:1 Comments Revision Date Initials Approved By Scale Date Revision Part No Finish Drawn By Material Description Project RSBP Ltd Technical Support & Product Design Alderflat Drive Newstead Industrial Estate Trentham ST4 8HX Telephone 01782 277200 Martin Rees Project Manager D
Masplas Product Library - December 2023 Page 47 Headrail Centraliser Used on Sylan & Sahara Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0600017 HEADRAIL CENTRALISER EASY FIT 203-037 STD £0.17 932 0 932 £155.64 31 31 366 Nov-23 4 8 10.50 +0.25 19.75 0 19.75 50 20.50 R6 8 8 25 25 8.50 2 x 4.50 THRU ALL R3.25 THRU 9.12 X 82° ISO VIEW SCALE 1:1 FLUSH GLASS FLUSH GLASS 203-037 EASY FIT HEADRAIL CENTRALISER ACETAL - NATURAL MILL HW ~ 2:1 04/02/2016 Material Drawing scale (unless stated otherwise) Date Drawn by RS Building Products Telephone 01782 277200 Facsimile 01782 657386 RS Building Products Ltd Alderflat Drive Newstead Industrial Estate Trentham Stoke on Trent ST4 8HX Revision Finish sheet 1 PRODUCT DEVELOPMENT CALE THIS DRAWING erances, check the overall widths of cubicles/ducts & adjust setting out accordingly erty of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should ise reproduced without theexpress written consent of R S Building Products Ltd. Drawing number Project title Project Drawing title
Masplas Product Library - December 2023 Page 48 2-part headrail end cap Used on Splash, Axis/Impact, Unity 13mm, Definition 13mm, Urban 13mm Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued IC 0780003 HEADRAIL END CAP - SILVER - 274-001 STD £0.15 851 0 851 £125.95 62 14 749 Dec-23 IC 0780003B BLACK FINISH HEADRAIL END CAP-274-001 NON £0.15 0 0 0 £- 0 0 No Issues IC 0780003MU BRASS FINISH HEADRAIL END CAP-274-001 NON £0.15 0 0 0 £- 0 0 No Issues IC 0780003MZ BRONZE FINISH HEADRAIL END CAP-274-001 NON £0.15 0 0 0 £- 0 0 No Issues 32.50 R1 58.50 62.50 62.50 2.50 5.05 3.33 45° 3 2° 1 3.50 4 12 4 8.50 3 3 9.46 2.36 24.66 32.50 3 4.50 2 135° 90° 0.50 16.90 2.55 9 16.52 8.45 2 6.35 7.75 4.75 8.36 10.46 1.80 2.40 0.50 90° 1 DETAIL D SCALE 5 : 1 1 2 3 4 1 2 3 5 C D 4 6 7 8 A B TBS-A End cap RS Building Prouducts LTD Ryan Burgess 14/11/2018 SAA matched LDPE SCALE:2:1 SHEET 1 OF 1 A3 DWG NO. REVISION 274 TBS-A Endcaps MATERIAL: NAME DATE This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. FINISH: IMPORTANT - DO NOT SCALE THIS DRAWING APPV'D DRAWN TITLE: PROJECT Company: 5 WEIGHT: NEW PRODUCT DEVELOPMENT Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.armitage-venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly E 274-001
Masplas Product Library - December 2023 Page 49 Non-Intrusive Dowel Used on Vepps Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued TT 0880002 V-EPPS NON-INTRUSIVE DOWEL DOCK 185-034 STD £0.11 5000 11000 16000 £1,824.00 7384 2 88612 Dec-23 9 25.50 20 61.50 R2 R1 R10 13.7 34 15° 55 26 20 37 9 30.75 A 4-Holes csk and drill to suit no.8 screw 7.7 4 38 45 12° R6 A 0.60 0.30 DETAIL A SCALE 5 : 1 V-groove 2.6 4.5 DETAIL A SCALE 1 : 1 10pt Arial regular font raised to 0.15mm Rev D - Patent emboss added Rev A - Angle of legs in section view inc. to 15 degrees Rev B - Circular cut-outs added F Rev C - Bottom section of design changed Rev F - Design changed to suit 3 holes Rev E - Patent emboss changed BCD1 2 A1 2 3 4 B A 5 6 SCALE:2:1 SHEET 1 OF 1 A4 C WEIGHT: RS Building Prouducts LTD Company: Nylon 6 DWG NO. PROJECT TITLE: NEW PRODUCT DEVELOPMENTNon-Intrusive dowel dock 185-034 REVISION 185 MATERIAL: FINISH: DS 09.09.13 Black NAME DATE Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.armitage-venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly IMPORTANT - DO NOT SCALE THIS DRAWING This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. 3 D APPV'D DRAWN
Masplas Product Library - December 2023 Page 50 Panel Fixing Clip Used on Vepps Warehouse Product Description Cat Cost Stock On order Total stock Total Value Av. Monthly Usage Months of stock MOQ 12 Month Issues Last Month Issued TT 0880042 FRAME PANEL FIXING CLIP 185-114 STD £0.07 32500 0 32500 £2,210.00 326 100 3912 Dec-23 60 39.50 R2.50 10.25 30 15 25 R5 A 150° 4 22 2 21 10.50 10.50 R2.50 R2.50 7.57 DETAIL A SCALE 2 : 1 Notes:- Part weight 10 grams 185 185-114 Panel fixing clip 02.09.14 Nylon 6 B Black Rev B - Radius changed from 4.5 to 5mm Rev A - slot centres chgd from 40mm to 39.5mm and from 15.5mm edge to centre to 15mm 1 2 1 2 3 4 B A 5 6 SCALE:1:1 SHEET 1 OF 1 A4 C WEIGHT: RS Building Products LTD PROJECT Company: TITLE: NEW PRODUCT DEVELOPMENT REVISION MATERIAL: FINISH: DS NAME DATE Alderflat Drive Newstead Industrial Estate Trentham Stoke On Trent ST4 8HX Tel: 01782 277200 Fax: 01782 657386 www.venesta.co.uk [email protected] Always allow for site tolerances, check the overall widths of cubicles/ducts before any installation & adjust setting out accordingly IMPORTANT - DO NOT SCALE THIS DRAWING This drawing is the property of RS Building Products Ltd and is protected by the Design Copyright Act 1968. It should not be copied or otherwise reproduced without the express written consent of RS Building Products Ltd. 3 D APPV'D DRAWN DWG NO.