The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by Eurolink, 2018-05-08 12:11:05

Spike Brochure

Updated May 2018

america

Sensory Tool Holder

Grinding, Milling, Turning, Drilling, Tapping,
Reaming, Boring, Production and more

axial force torque bending moment temperature

CONTROL THE FORCE

spikeamerica.com

america axial force Increase Productivity

Measure in increased feed
real time
Interface

Spike® Wireless original shortened
Spike® Data process center
Clamping drilling
System Signal time savings
Tool
Wireless Software
Reciever
Measurements
USB Connection Analysis
Monitoring
Analyze the data

■ Wireless No cables to damage inside the machine ■ Measurement Data Easily analyzed and
■ Easily Multiplied Several tool holders can be connected manipulated with specially developed software.
■ SPIKE® Tool Analyser Software
to one receiver.
■ Reliable Data transmits to the outside of the machine Quick and efficient reporting and documentation.
■ Easy to transport Carry it right onto the shop floor
■ Effortless Measurements can be made by the machinist System Specs

data rate up to 2.5 kHz

battery life — activity 16 hours

delay 2 – 4.375 ms

battery life — standby 4 weeks

data transmission frequency ISM at 2.45 GHz

charging time 4 hours

Interface SPIKE® Clamping system signal transmission range up to 16 ft

HSK 40, 50, 63, 100 I Ø [mm]: Collet chuck ER 20, 25, 32, 40 max. rpm 18,000
TC/SK 30, 40, 50 30 – 32 – 36 Precision collet chuck NBC20, 16
BT 40 40 – 46 – 50 PowRgrip PG 25 number of wireless channels 4 + temp.
CAT 40, 50 60 – 61 Hydraulic chuck
Cylinder shaft A Ø [mm]: Grinding arbor measurement resolution up to 16 bit
59.8 – 62.5 Weldon, Syncro shaft, adapter
spikeamerica.com 75.0 – 83.0 cooling system compability inside/outside

raw data output .txt file

Visualize the data america

Optimizing processes: Time Needed -40%

Previous
Later

A diagnostic tool Analyzing quality of drilling holes: Bad
■ Offline process analysis
■ Process optimisation Good (Offset, progression)
■ Problem diagnosis
■ Mobile use with case Offset ca. 0.05 mm Offset ca. 0.01 mm

A monitoring tool Checking the abrasive material: Grinding gain not
■ Online process analysis solved, jump
■ Monitoring with Abrasive,
■ Machine connected abbalance,
■ Industry 4.0 integrable chubbiness

Successful Detection of chip leathers:
Applications
Chip
■ Tool Development
■ Impartial Assessment
■ Evaluation of Tools
■ Tool Life Projections
■ Process Optimization
■ Machine Analysis
■ Process Improvement
■ Application Engineering
■ Clear Documentation

106 W Ohio Ave america
Mount Vernon, OH 43050
phone (740) 392-1549 Cutting Tool Manufacturing
fax (740) 392-0230
[email protected]

Markets Served

Medical Powertrain

Aerospace Energy Production

Coolant Manufacturing Machine Tool Dealers Research & Development

University spikeamerica.com

SPI-BROCHURE GJ040518


Click to View FlipBook Version