Glanze Catalog 2015

SUPERIOR PERFORMANCE & VALUE www.GlanzeUSA.com

Turning Swiss Tooling

Boring Bars - Coolant Thru & Solid

Cut - Off Milling

2015

edition 2

Glanze is a manufacturer of indexable carbide cutting tools. The
company is backed by a vast experience in the manufacturing of
innovative cutting and engineering tools. Glanze has the flexibility
of a medium sized enterprise partnered with the strong backing of
their parent company to export around the globe and serve some
of the largest tool companies in the world.

The Nickel Advantage

Toolholders and clamps with the Nickel finish are
► More corrosion resistant
► Tougher and more wear resistant
► Longer lasting and easier to maintain

Glanze Secure Clamp System

Uses one screw One wrench for insert ► Improves tool life and increases
for the clamp indexes/changes productivity
and insert
► Consistent repeatability
between indexes/insert changes

► Less spare parts to stock

3 Turning Provides firm and
secure insert seating
with minimal torque

14Blocks & Blades

8 Swiss Tooling 15Milling Cutter

10Solid 16Kit Convenience
Boring Bars

12Coolant Thru 18 Technical
Boring Bars Information

Safety Warning
Glanze products are engineered and manufactured with safety in mind. The heat treat specifications exceed or meet
all standards. All of the products manufactured by Glanze are designed to perform without any undue safety issues
when caution, common sense and proper safety practices are followed. The use of cutting tools and toolholders is safe
when proper application and protection guidelines are observed. Even when these proper precautions are taken, it is
possible that fragments of a cutting tool, cutting material, or holding device may be thrown at a very high rate of speed
and have potential to cause severe bodily harm. It is imperative that general safety precautions and safety glasses be
used at all times.

*Prices subject to change without notice*

5 degree negative TURNING 80° DIAMOND - ½” I.C.
for turning, facing
& contouring

gage insert CNMG 432

hb l f EDP Price
1.000 G815009 $66.00
GCLNR 12-4B

0.750 0.750 4.500

GCLNR 16-4D $72.00
1.000 1.000 6.000 1.250 G815010

GCLNR 20-4D
1.250 1.250 6.000 1.500 G815011 $101.00

Clamp, Clamp Screw & Spring Shim Shim Screw

G110202 G110203 G110204
$18.67 per set $10.54 ea $4.07 ea

www.glanzeusa.com 3

TURNING TRIGON - ½” I.C. 5 degree negative
for turning, facing
& contouring

gage insert WNMG 432

hb l f EDP Price
1.000 G815003 $66.00
GWLNR 12-4B

0.750 0.750 4.500

GWLNR 16-4D $72.00
1.000 1.000 6.000 1.250 G815004

GWLNR 20-4D
1.250 1.250 6.000 1.250 G815005 $101.00

Clamp, Clamp Screw & Spring Shim Shim Screw

G110202 G110213 G110204
$18.67 per set $9.00 ea $4.07 ea

4 (740)392-1549

3 degree negative TURNING 55° DIAMOND - ½” I.C.
for turning & profiling

gage insert DNMG 432

hb l f EDP Price
GDJNR 12-4B 1.000 G815006 $66.00

0.750 0.750 4.500

GDJNR 16-4D $72.00
1.000 1.000 6.000 1.250 G35002A

GDJNR 20-4D
1.250 1.250 6.000 1.500 G815008 $101.00

Clamp, Clamp Screw & Spring Shim Shim Screw

G110202 G110214 G110204
$18.67 per set $9.00 ea $4.07 ea

www.glanzeusa.com 5

TURNING 35° DIAMOND - ½” I.C. 3 degree negative NFicinkieslh
for turning & profiling

gage insert VNMG 432

hb l f EDP Price
GVJNR 12-3B 5.000 1.000 G815012 $72.00

0.750 0.750

GVJNR 16-3D $79.00
1.000 1.000 6.000 1.250 G815013

GVJNR 20-3D
1.250 1.250 6.000 1.500 G815014 $107.00

Clamp Shim Shim Screw

G110206 G110215 G110208
$22.00 ea $16.55 ea $11.53 ea

6 (740)392-1549

3 degree negative NFicinkieslh TURNING TRIANGLE - 3/8” I.C.
for turning & profiling

gage insert TNMG 332

hb l f EDP Price
1.000 G815000 $66.00
GTJNR 12-3B

0.750 0.750 4.500

GTJNR 16-3D $72.00
1.000 1.000 6.000 1.250 G815001

GTJNR 20-3D
1.250 1.250 6.000 1.500 G815002 $101.00

MTJNR 16-3D $55.00
1.000 1.000 6.000 1.250 G35003A

G Style Clamp, Clamp Screw & Spring Shim Shim Screw

G110221 G110216 G110217
$18.67 per set $8.59 ea $4.07 ea

M Style Clamp Shim Shim Post Shim Screw

G110218 G110216 G110219 G110220
$22.00 ea $8.59 ea $11.53 ea $3.05 ea

www.glanzeusa.com 7

SWISS TOOLING 80° DIAMOND 5 degree positive NFicinkieslh
for turning & profiling

¼” I.C.
gage insert CCMT 21.51

Right Hand

Square l f EDP Price
Shank G815040 $39.98

SCLCR 0505 D2

0.312 2.362 0.394

SCLCR 0606 E2
0.375 2.750 0.472 G815042 $44.92

Insert Screw SCLCR 0808 F2 $49.12
G110211 0.500 3.149 0.629 G815046 $54.45
$3.77
SCLCR 1010 H2
0.625 3.937 0.787 G815048

Left Hand

Square l f EDP Price
Shank 0.394 G815041 $39.98

SCLCL 0505 D2

0.312 2.362

SCLCL 0606 E2
0.375 2.750 0.472 G815045 $44.92

SCLCL 0808 F2
0.500 3.149 0.629 G815047 $49.12

SCLCL 1010 H2
0.625 3.937 0.787 G815049 $54.45

3/8” I.C. Right Hand
gage insert CCMT 32.51
Square l f EDP Price
Insert Screw Shank 0.787 G815050 $51.65
G110212
$4.15 SCLCR 1010 H3

8 (740)392-1549 0.625 3.937

Left Hand

Square l f EDP Price
Shank 0.787 G815051 $51.65

SCLCL 1010 H3

0.625 3.937

5 degree positive NFicinkieslh SWISS TOOLING 55° DIAMOND
for turning & profiling

¼” I.C.
gage insert DCMT 21.51

Right Hand

Square l f EDP Price
Shank
G815052 $44.92
SDJCR 0505 H2 G815054 $52.58
G815056 $55.35
0.312 3.937 0.394 G815058 $61.42
Price
SDJCR 0606 H2 EDP
0.375 3.937 0.472 $44.92
G815053
Insert Screw SDJCR 0808 H2
G110211 0.500 3.937 0.629
$3.77
SDJCR 1010 H2
0.625 3.937 0.787

Left Hand

Square l f
Shank 0.394

SDJCL 0505 H2

0.312 3.937

SDJCL 0606 H2
0.375 3.937 0.472 G815055 $52.58

SDJCL 0808 H2
0.500 3.937 0.629 G815057 $55.35

SDJCL 1010 H2
0.625 3.937 0.787 G815059 $61.42

www.glanzeusa.com 9

SOLID BORING BARS negative style NFicinkieslh
for turning & profiling

80 degree - ½” I.C. D=Minimum Bore
gage insert CNMG 432

dDL f EDP Price
S16T GCLNR-4 0.640 G815018 $126.00
1.000 1.401 12.000

S20U GCLNR-4
1.250 1.530 14.000 0.765 G815019 $151.00

S24U GCLNR-4
1.500 1.780 14.000 0.890 G815020 $170.00

Clamp, Clamp Screw & Spring Shim Shim Screw

G110202 G110203 G110204
$18.67 per set $10.54 ea $4.07 ea

Trigon - ½” I.C. D=Minimum Bore
gage insert WNMG 432

dDL f EDP Price
S16T GWLNR-4 0.640 G815015 $126.00
1.000 1.280 12.000

S20U GWLNR-4
1.250 1.530 14.000 0.765 G815016 $151.00

S24U GWLNR-4
1.500 1.780 14.000 0.890 G815017 $170.00

Clamp, Clamp Screw & Spring Shim Shim Screw

G110202 G110213 G110204
$18.67 per set $9.00 ea $4.07 ea

Triangle - 3/8” I.C. D=Minimum Bore
gage insert TNMG 332
dDL f EDP Price
10 (740)392-1549 SI-MTUNR 16-3D 0.640 G35004A $120.00
1.000 1.280 12.000

Clamp, Clamp Screw & Spring Shim Shim Screw

G110221 G110216 G110217
$18.67 per set $8.59 ea $4.07 ea

positive screw down style NFicinkieslh SOLID BORING BARS
for turning & profiling

80 degree - ¼” I.C. D=Minimum Bore
gage insert CCMT 21.51

dDL f EDP Price
S05H SCLCR-2 0.236 G815021 $35.00

0.312 0.375 3.937

S06K SCLCR-2 $35.00
0.375 0.500 4.921 0.275 G815022

S08M SCLCR-2 $38.00
0.500 0.602 5.900 0.354 G815023

S10R SCLCR-2 $42.00
0.625 0.812 7.874 0.433 G815024

Insert Screw
G110211
3.77

80 degree - 3/8” I.C. dDL f D=Minimum Bore
gage insert CCMT 32.51 S08M SCLCR-3 0.354 EDP Price
80 degree - 3/8” I.C.
gage insert CCMT 321 0.500 0.625 5.900 G815025 $38.00

S10R SCLCR-3 $44.00
0.625 0.812 7.874 0.433 G815026

S12S SCLCR-3 0.511 G815027 $57.00
0.750 0.954 9.840

Insert Screw
G110212
$4.15

D=Minimum Bore

dDL f EDP Price
S08M SCLCR-3 0.354 G35000A $45.00
0.433 G35001A $50.00
0.500 0.625 5.900

S10R SCLCR-3
0.625 0.812 7.874

Insert Screw 11
G110212
$4.15

www.glanzeusa.com

COOLANT THRU BORING BARS positive screw down style NFicinkieslh CoTohlarnut
for turning & profiling

80 degree - ¼” I.C. D=Minimum Bore
gage insert CCMT 21.51

dDL f EDP Price

A05H SCLCR-2 G110311A $39.00
G110303A $29.00
0.312 0.375 3.937 0.236
G110310A $39.00
Also available in Black Oxide G110302A $34.00

A06J SCLCR-2

0.375 0.500 4.330 0.275
Also available in Black Oxide

A08K SCLCR-2 G110309A $46.00
G110301A $39.00
0.500 0.602 4.92 0.354
Also available in Black Oxide

A10M SCLCR-2 G110312A $53.00
G110300A $44.00
0.625 0.812 5.900 0.433
Also available in Black Oxide

Insert Screw
G110211

$3.77

80 degree - 3/8” I.C. D=Minimum Bore
gage insert CCMT 32.51
dDL f EDP Price
12 (740)392-1549
A08K SCLCR-3 G910830 $46.00
G910831A $39.00
0.500 0.625 4.921 0.354
Also available in Black Oxide G910840 $53.00
G910841A $44.00
A10M SCLCR-3
$60.00
0.625 0.812 5.900 0.433 $49.00
Also available in Black Oxide

A12Q SCLCR-3 G910842
G910843A
0.750 0.954 7.080 0.511
Also available in Black Oxide

Insert Screw
G110212
$4.15

positive screw down style CoTohlarnut COOLANT THRU BORING BARS
for turning & profiling

55 degree - ¼” I.C. D=Minimum Bore
gage insert DCMT 21.51

dDL f EDP Price
A06J SDUCR-2 0.275 G815035 $39.00

0.375 0.489 4.330

A08K SDUCR-2 $46.00
0.500 0.625 4.920 0.354 G815036

A10M SDUCR-2 $53.00
0.625 0.812 5.900 0.433 G815037

Insert Screw
G110211
$3.77

55 degree - 3/8” I.C. D=Minimum Bore
gage insert DCMT 32.51

dDL f EDP Price
A10M SDUCR-3 0.433 G815038 $53.00
0.625 0.812 5.900 $60.00

A12Q SDUCR-3
0.750 0.954 7.086 0.511 G815039

Insert Screw
G110212
$4.15

13www.glanzeusa.com

BLOCKS & BLADES for cut-off & grooving A
C

L A C EDP Price
CTPB 9.525-20 for 20mm height blade (0.787)
2.5590 0.3125 0.5000 G815071 $126.45

CTPB 7.937-20 for 20mm height blade (0.787)
2.5590 0.3750 0.5000 G815072 $126.45

CTPB 12.700-20 for 20mm height blade (0.787)
2.5590 0.5000 0.5000 G815073 $126.45

CTPB 15.875-20 for 20mm height blade (0.787)
2.5590 0.6250 0.5510 G815074 $126.45
CTPB 19.05-26 for 26mm height blade (1.000)
3.437 0.7500 0.6870 G815075 $135.27

CTPB 25.400-32 for 32mm height blade (1.250)
4.3110 1.0000 0.7814 G815076 $140.48

Clamp Screw - 20 Clamp Screw - 26 Clamp Screw - 32
G815091 G815093
G815092
$2.59 ea
$3.09 ea $3.59 ea

for GTN/GTR/GTL style insert system H1 B1 L1 insert insert EDP Price
0.063 3.543 width size G815081 $66.42
(740)392-1549 20-2 0.078 2 $66.42
0.787 $66.42
$66.42
20-3 $66.42
0.787 0.094 3.543 0.118 3 G815082 $75.87

26-3
1.000 0.094 4.330 0.118 3 G815083

32-3
1.230 0.094 5.900 0.118 3 G815084

26-4
0.990 0.125 4.330 0.157 4 G815085

1104 32-4
1.220 0.125 4.900 0.157 4 G815086

for face milling & profiling MILLING CUTTER

PAAP 5022 02 EDP Price
G815062 $195.00
D3 D1 H

2.000 0.750 1.500

Insert Screw
G110211
$3.77

Shell Mill Holders 1116.3/4.40CAT
d D L2
CAT 40
0.750 2.000 0.670
L EDP Price
1.750 11078T $85.00

CAT 50 1576.33.50CAT
d D L2
L EDP Price
0.750 2.000 0.670 1.750 11081T $99.00

15www.glanzeusa.com

KIT CONVENIENCE for cut-off & grooving

¾” Shank

includes:
► CTPB 19.05 - 26 parting block
► 2 blades: 26 - 3
► hex key
► insert removal tool
► 4 inserts: GCMX - 32 PH 3235

G976145
$226.00

1” Shank

includes:
► CTPB 25.40-32 parting block
► 2 blades: 32-3
► hex key
► insert removal tool
► 4 inserts: GCMX - 32 PH3235

G976150
$258.00

for milling & profiling Cat 40 Shell Mill

includes:
► 1116.3/4.40CAT shell mill
► PAAP 5022 02 milling cutter

G815065
$266.00

16 (740)392-1549

boring bars KIT CONVENIENCE

SCLCR 2 CoTohlarnut
BOlaxcidke
includes:
► 5/16” shank x 4”
► 3/8” shank x 4.5”
► 1/2” shank x 5”
► 5/8” shank x 6”
► 10 inserts - CCMT 21.51 F1 G150

G980400A
$165.00

SCLCR 3 CoTohlarnut
BOlaxcidke
includes:
► 1/2” shank x 5”
► 5/8” shank x 6”
► 3/4” shank x 7”
► 10 inserts - CCMT 32.51 F1 G150

G980410A
$149.00

for milling & profiling Cat 50 Shell Mill

includes:
► 1576.33.50CAT shell mill
► PAAP 5022 02 milling cutter

G815066
$279.00

17www.glanzeusa.com

TECHNICAL INFORMATION Choosing Insert Shape Scale 1 Larger point
angle and radius equals
1 Strength + 80° 80° 60° + Accessibility more strength, when point
2 Vibration tendency + - Power angle/radius is decreased

R° 90° 55° 35°

versatility and accessability

Factors increases but strength
decreases.
Roughing

Light roughing/semi Scale 2 Larger point angle
finishing radius increases power
Finishing consumption and vibration.
Turning & Facing Smaller point angle and
Profiling radius decreases vibration
Operational versatility and power consumed.
Lpoimwiteerd machine
Vibration tendencies Most suitable
Suitable

Hard material

Intermittent mchining

Small lead angle

Large lead angle

Boring Bar Nomenclature

S 16 T G W L N R 4

Bar Type Diameter Length Holding Insert Tool Style Insert Hand of Insert Size
(D) (L) Method Shape F - 0° Clearance Tool
K - 15° Insert I.C.
S - Steel Bar diameter H - 4” R L - 5° Angle R - Right in 1/8”
in 1/16” J - 4½” M - 50° N - 0° L - Left
K - 5” M S B - 5° increments
incraments M - 6” G P - 27.5° C - 7°
R - 8” S C Q - 17.5° P - 11° (e.g., 4 =1/2” I.C.)
(e.g., 16 x 1/16” = 1”) S - 10”
T - 12” U - 3° I.C.
U - 14” X - 5°
V - 16”
Y - 18” W

D T
L
D
V

18 (740)392-1549

Turning Formulas Feed Rate = Feed x RPM TECHNICAL INFORMATION
inches per inches per
Feed rate: Rate at which the insert travels minute revolution
through the workpiece measured in inches
per minute. Cutting Speed = Workpiece Diameter x 0.262 x RPM

Cutting Speed: Velocity of the workpiece (SFM)
as it passes the insert measured in surface
feet per minute. RPM = Cutting Speed / Workpiece Diameter x 0.262 x RPM

Revolutions per Minute: Rotating velocity (SFM)
of the machine spindle.
MRR = Depth of Cut X Feed x Cutting Speed x 12
Metal Removal Rate: Speed that stock
is removed from the part being machined,
measured in cubic inches per minute.

Toolholder Nomenclature

G V J N R 123 B

Holding Insert Tool Style Insert Hand of Shank Insert Size Length
Method Shape C - 0° Clearance Tool Diemensions
D - 45° J - 3½”
M R R - 15° Angle R - Right For a square shank holder, Insert I.C. A - 4”
S - 45° L - Left where “A” and “B” are equal, B - 4½”
G S T - 27.5° N - 0° expressed as 1/16” incraments in 1/8” C - 5”
V - 17.5° B - 5° (e.g., 16 x 1/16” = 1” square increments D - 6”
C W - 10° C - 7° E - 7”
P - 11° shank). For shanks 1/2” square (e.g., 4 =1/2” I.C.) F - 8”
D - 15° and below, postion 6 will be
F - 25° at 0.” I.C.

W For rectangle shank holders,
“A” is expressed in 1/8” incre-
ments and “B” is expressed
in 1/4” increments (e.g., 64 [6
x 1/8”] & [4 x 1/4”] = 3/4” x 1”
shank.

T

D
V

19www.glanzeusa.com

Customer Commitment
To work hard everyday to be regarded in the metal
working marketplace as a supplier that is friendly, helpful and
easy to do business with - EVERY DAY, EVERY TIME.
To offer innovative high quality
solutions at a competitive price.
To be receptive & proactive in identifying solutions
for our customers needs & requirements.

WE SERVICE

WHAT WE SELL

www.GlanzeUSA.com
for spare parts

g Another Quality Product from g

EDP: GLA-CAT15 106 West Ohio Avenue
Mount Vernon, Ohio 43050
phone (740) 392-1549
fax (740) 392-0230
www.eurolinkinc.com
[email protected]

(740)392-1549Published July 2015

Revised September 2015