Catalogue
2017
Remote controls
Automations
The Installer’s choice
erone.com
CCDDVVII WWIIRREELLEESSSS
CDVI Wireless Spa, was born in 1996. We create and manufacture analog and digital wireless electronic devices.
We are part of CDVI Group since 2005. ERONE, is the commercial brand which identifies the “Made in Italy”
wireless products of the Group CDVI .
MISSION
“Our mission is to design, develop, manufacture and sell radio controls for any type of applications, expecial-
ly for automatic closures, access controls and, in general, for the domotics. The structure of the company is
oriented to provide full support to the customers, from the simple personalization of a standard product up to
a full custom product, realized under commitment.”
CDVI WIRELESS SPA
Via Piave, 23
31020 - S.Pietro di Feletto (TV)
Italy
tel. +39-0438-450860
fax. +39-0438-455628
mail: [email protected]
web:www.erone.com
CDVI GROUP WORLDWIDE
CDVI SWEDEN [ Goteborg ] CDVI FRANCE [ Paris ]
CDVI UK [ England ] CDVI BIOMETRICS [ Germany ]
CDVI BENELUX [ Belgium ] CDVI ELECTRONICS [ France ]
CDVI SUISSE [ Losanna ]
CDVI AMERICAS [ Montreal ] CDVI PLASTIC [ France ]
CDVI ITALIA [ Italy ] CDVI METAL [ France ]
CDVI IBERICA [ Barcellona ]
CDVI MAROC [ Casablanca ] CDVI WIRELESS [ Italy ]
CDVI OOO [ Moscow ]
Manufacturers CDVI CHINA [ China ]
Dealers
The Installer’s choice
2
CDVI WIRELESS
Who was ERONE and why he has become our Brand The bucket, filling up slowly,
The name Erone reveals a story : the figure of a man who gained weight, lowered, tightened
since the ancient times realized systems now very common... the ropes and caused, in this way,
The choice of the name comes from our job, made of research, the opening of the main gates.
inventiveness and realization care.. The device was used, also, to
close the main gates: once the fire
The anecdote had been put out, the pressure
In the first century BC, the people who went to Alexandria in in the reservoir below the altar
Egypt could be a witness of a strange phenomenon. A man with decreased. In this way, water filled
a beard during a ceremony lit a bon fire upon the altar situated up the reservoir again and the
in front of the temple. After a few minutes, slowly, the huge weight moved the rollers linked
main gates of the building moved till they completely opened. to the main gates, making them
Was it a divine presence? Or a miracle inspired by prayers? close.
Nothing to do with this: it was, actually, a device that exploited
the air warmed up by the fire in order to move the main doors. Once discovered this historical figure, we have decided to
This invention, that aroused the crowd’s huge astonishment, make it our symbol, both for the affinities with our aims, and
was the fruit of Erone ‘s cleverness. The researches and studies the curious invention that explains to all the operators the
that he carried out aimed always at obtaining practical results. ancient origin of our sector of activity.
How it works
The air, warmed by the bonfire on the altar, produced pressure
in the below reservoir and drove the water in it contained,
through a siphon, into a hanging bucket linked to the main
gates by means of ropes.
MAIN RESOURCES
RESEARCH & DEVELOPMENT
PCB Designing Card prototyping RF Testing Temperature test
PRODUCTION
Production Inventory In-circuit programming
RF Test Assembling Laser etching
www.erone.com
3
SUMMARY
REMOTE CONTROLS
Page
433 MHz AM Keeloq® Hopping code Radiocontrols
Receivers Selection Guide....................................................................................................................................... 8
Receivers................................................................................................................................................................. 10
Receivers Cross-reference...................................................................................................................................... 21
Transmitters............................................................................................................................................................. 22
Transmitter Cross-Reference................................................................................................................................... 29
433 MHz Very High Security 128 bit Radiocontrols........................................................................................................ 31
433 MHz Fixed code Radiocontrols
Transmitters............................................................................................................................................................. 33
Receivers................................................................................................................................................................. 34
868 MHz AM Keeloq® Hopping code Radiocontrols...................................................................................................... 37
RF Modules for OEM applications................................................................................................................................... 41
Radiocontrolled maglocks............................................................................................................................................... 41
Wireless Devices............................................................................................................................................................... 42
Multiuser receivers............................................................................................................................................................ 43
Wiegand receivers............................................................................................................................................................. 43
Wireless access control system...................................................................................................................................... 45
Active tags......................................................................................................................................................................... 49
Accessories....................................................................................................................................................................... 52
4 The Installer’s choice
SUMMARY
AUTOMATIONS
Page
Selection guide.................................................................................................................................................................. 56
Automations for sliding gates
1000 Kg.................................................................................................................................................................... 58
600 Kg...................................................................................................................................................................... 60
Accessories.............................................................................................................................................................. 61
Automations for swing gates
Linear....................................................................................................................................................................... 62
Underground............................................................................................................................................................ 64
Accessories.............................................................................................................................................................. 65
Automations for garage doors
Sectional & Overhead.............................................................................................................................................. 68
Accessories.............................................................................................................................................................. 69
Road Barries...................................................................................................................................................................... 70
Control panels................................................................................................................................................................... 72
Accessories....................................................................................................................................................................... 73
Infrared Photocells............................................................................................................................................................ 74
Automatic doors
Digiway SR............................................................................................................................................................... 78
Digiway Plus............................................................................................................................................................. 80
Accessories.............................................................................................................................................................. 83
General Sales Conditions................................................................................................................................................. 85
Index ................................................................................................................................................................................. 48
www.erone.com 5
REMOTE
CONTROLS
433 MHz RECEIVERS
LOW POWER RELAYS Standard SEL2641R433-I IP 30
( 1 A / 24 Vac ) XPL IP 65
Mini SEL2641R433-Z1 IP 2X
Sequential SEL2641R433-Z2
Nano SEL2641R433-Z4
Garage door
Magnets SEL2641R433-NN
Active tags
SEL2641R433-SVM
POWER RELAYS SEL2641R433-C3P IP 56
( 16 A / 24 Vac )
Automotive
HIGH POWER RELAYS 1 Relay SEL2641R433-XPL1P
( 16 A / 230 Vac ) 2 Relays SEL2641R433-XPL1V
4 Relays
DIN Guide SEL2641R433-XPL2P IP 2X
SEL2641R433-XPL2V
SEL2641R433-XPL4P
SEL2641R433-XPL4V
SEL2641R433-BD4
Nano SEL2641R433-NNV IP 2X
PLUG-IN CARD ( 1 A / 24 Vac ) 26 bit SEL2641R433-S0 / S1 / S2 IP 2X IP 2X
WIEGAND OUTPUT Clock & Data SEL2641R433-S4 SELCD4A
SEL2641R433-S9N
SEL2641R433-S13
SELWR433
SELWR433-800
26 - 30 bit
Active tags
Plug-in Cards
500 - 800 - 1600 Users SEL2641R433-K8
SEL2641R433-K8P
MULTIUSER SEL2641R433-K16P IP 2X
4000 Users
8 The Installer’s choice
SELECTION GUIDE
SEL2641R433-XPL IP 30 SEL2641R433-XPL54
IP 55
SEL2641R433-XPL5
IP 55
SEL2641R433-SQR IP 30
SEL2641R433-GDR IP 2X
SEL2641R433-C5P
DTRR1434R IP 54
IP 56
IP 55
IP 55
IP 55
SEL2630MF IP 56
DTRR1434 IP 54
SEL2641R433-WPL4K IP 55 SEL2641R433-EP SELWR433-SAT
SELW30R433-SAT
IP 55
SEL2641R433-EM IP 2X
9
www.erone.com
433 MHz RECEIVERS
2 Relays standard receiver
Superheterodyne single conversion receiver with 2 x 24VA relays - Self-learning memorization - standard pulse output.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-I F1001000001 RECEIVER 2 RELAYS 433 AM STANDARD
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK
Modulation 2 x 24VA
Relays 12 - 24 Vac/dc
Power supply 85 Tx buttons
Memory 105 x 45 x 28
Dimensions (mm) Transparent - IP30
Enclosure
2 Relays receiver XPL
Superheterodyne single conversion receiver with 2 x 24VA relays . Transmitters pairing can be carried out either directly on the receiver using the 2 push
buttons, or remotely using the buttons of the transmitter. General parameters of the receiver (relay time etc) can only be set using the 2 push buttons
of the receiver.
All programming steps are displayed on the backlit LCD display. The internal data can be saved/restored to/from an external memory ( optional).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL F1001000078 RECEIVER 2 RELAYS 433 AM XPL
SEL2641-MXPL F0204000043 BACKUP MEMORY FOR RECEIVER XPL
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL2641-MXPL
Modulation 2 x 24VA
Relays 12 - 24 Vac/dc
Power supply 100 Tx
Memory 105 x 45 x 28
Dimensions (mm) Transparent - IP30
Enclosure
10 The Installer’s choice
433 MHz RECEIVERS
2 Relays receiver XPL5
Superheterodyne single conversion receiver with 2 x 24VA relays. Programming of transmitters can be carried out either directly on the receiver using the
2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the transmitters. General parameters of the receiver
(relay time etc) can only be done using the 2 push buttons of the receiver. All programming steps are displayed on the backlit LCD display. The internal
data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL5 F1001000082
RECEIVER 2 RELAYS 433 AM XPL5
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL2641-MXPL
Modulation 2 x 24VA
Relays 12 - 24 Vac/dc
Power supply 500 TX
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
4 Relays receiver XPL54
Superheterodyne single conversion receiver with 4 x 24VA relays . Transmitters pairing can be carried out either directly on the receiver using the 2 push
buttons, or remotely using the buttons of the transmitter. General parameters of the receiver (relay time etc) can only be set using the 2 push buttons
of the receiver.
All programming steps are displayed on the backlit LCD display. The internal data can be saved/restored to/from an external memory ( optional).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL54 F1001000087
RECEIVER 4 RELAYS 433 AM XPL54
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL2641-MXPL
Modulation 4 x 24VA
Relays 12 - 24 Vac/dc www.erone.com
Power supply 500 Tx
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
11
433 MHz RECEIVERS
1 Relay receiver XPL1P
Superheterodyne single conversion receiver with 1 power relay and power supply 12 - 24 Vac/dc. Programming of transmitters can be carried out either
directly on the receiver using the 2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the
transmitters. General parameters of the receiver (relay time etc) can only be done using the 2 push buttons of the receiver. All programming steps are
displayed on the backlit LCD display. The internal data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL1P F1001000088 1 POWER RELAY RECEIVER 433 AM 12/24 Vac/dc
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL2641-MXPL
Modulation 1 x 16A - 230 Vac
Relays 12 - 24 Vac/dc
Power supply 500 Tx
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
1 Relay receiver XPL1V
Superheterodyne single conversion receiver with 1 power relay and power supply 230 Vac Programming of transmitters can be carried out either directly
on the receiver using the 2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the transmitters.
General parameters of the receiver (relay time etc) can only be done using the 2 push buttons of the receiver. All programming steps are displayed on the
backlit LCD display. The internal data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL1V F10010000089 1 POWER RELAY RECEIVER 433 AM 230 Vac
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL2641-MXPL
Modulation 1 x 16A - 230 Vac
Relays 230 Vac / 50 Hz The Installer’s choice
Power supply 500 Tx
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
12
433 MHz RECEIVERS
1-2-4 Relays MINI receivers
Receivers with 1, 2 or 4 output 24 VA relays. Self-learning memorization. Pulse or step mode for 1 relay.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-Z1 F0204000027
SEL2641R433-Z2 F0204000026 RECEIVER MINI 1 RELAY 433 AM
SEL2641R433-Z4 F0204000015 RECEIVER MINI 2 RELAYS 433 AM
RECEIVER MINI 4 RELAYS 433 AM
TECHNICAL SPECIFICATIONS SEL2641R433-Z1 SEL2641R433-Z2 SEL2641R433-Z4 ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz
Modulation
Relays Keeloq® Hopping code
Power supply
Memory AM/ASK
Dimensions (mm)
Enclosure 1 x 24VA 2 x 24VA 4 x 24VA
12 - 24 Vac/dc
85 TX buttons
80 x 80 x 50
IP65 ( outdoor)
4+1 or 2+1 power relays receivers with common output
Single conversion supereterodyne receiver with 3 or 5 x 250W automotive relays - Transmitter codes selflearning - Relays output C-NO with common relay.
Relays with pulse or step operating mode.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-C3P F1001000076 POWER RECEIVER 2+1 RELAYS 433 AM
SEL2641R433-C5P F1001000075 POWER RECEIVER 4+1 RELAYS 433 AM
TECHNICAL SPECIFICATIONS SEL2641R433-C3P SEL2641R433-C5P ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz
Modulation
Relays Keeloq® Hopping code
Power supply
Memory AM/ASK
Dimensions (mm)
Enclosure 3 x 24V - 30A 5 x 24V - 30A
12 - 24 Vac/dc
85 Tx buttons
108 x 108 x 58
IP56 ( outdoor)
www.erone.com 13
433 MHz RECEIVERS
DIN mount 4 relays power receiver
DIN guide power receiver with 4 x 16A relays.
Max switch power: 16A / 230 Vac. Operating mode pulse or step with dip-switch selection. External C-NO buttons input for direct relay activation.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-BD4 F1001000016 DIN MOUNT 4 RELAYS POWER RECEIVER
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK
Modulation 4 x 16A - 230 Vac
Relays 12 - 24 Vac/dc
Power supply 85 Tx Buttons
Memory 85 x 70 x 50
Dimensions (mm) DIN 8 modules - Indoor IP2X
Enclosure
2 relays sequencing vestibule receiver
Single conversion superheterodyne receiver with 2x24VA relays. The relays RV and RR can operate in 3 different modes:
a) pulse or step mode. Adjustable pulse width for relay RV;
b) pulse mode with delayed activation of relay RR;
c) sequential mode : both relays ( RR and RV ) activated with an adjustable delay for relay RV.
The activation delay between the first and the second relay is programmable from 0 to 30 sec. Best use is the driving of automatic doors in sequential
mode.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-SQR F1001000005 2 RELAY SEQUENCING VESTIBULE RECEIVER
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK
Modulation 2 x 24VA Relay 1 Relay activation timing 0,5 sec.
Relays 12 - 24 Vac/dc Relay 2 0 - 30 sec.
Power supply 85 Tx buttons
Memory 105 x 45 x 28 0,5 sec.
Dimensions (mm) Transparent - IP30
Enclosure 5 / 10 sec.
Pulse width 0 - 30 sec.
Delay time
14 The Installer’s choice
433 MHz RECEIVERS
2 Relays power receivers
Superheterodyne single conversion receiver with 2 power relays and power supply 230 Vac or 12/24 Vac/dc. Programming of transmitters can be carried
out either directly on the receiver using the 2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the transmit-
ters. General parameters of the receiver (relay time etc) can only be set using the 2 push buttons of the receiver. All programming steps are displayed on
the backlit LCD display. The internal data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent. 2 addictional
inputs for external push buttons which allow to activate/deactivate the relays.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL2P F1001000091 POWER RECEIVER XPL 2 RELAYS 24V
SEL2641R433-XPL2V F1001000092 POWER RECEIVER XPL 2 RELAYS 230Vac
TECHNICAL SPECIFICATIONS SEL2641R433-XPL2P SEL2641R433-XPL2V ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz SEL2641-MXPL
Modulation
Power supply Keeloq® Hopping code
Relays
Memory AM/ASK
Dimensions (mm)
Enclosure 12 - 24 Vac/dc 230 Vac - 50 Hz
2 x 16A - 230 Vac
500 Tx
155 x 120 x 55
IP55 ( outdoor)
4 Relays power receivers
Superheterodyne single conversion receiver with 4 power relays and power supply 230 Vac or 12/24 Vac/dc. Programming of transmitters can be carried
out either directly on the receiver using the 2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the transmit-
ters. General parameters of the receiver (relay time etc) can only be set using the 2 push buttons of the receiver. All programming steps are displayed on
the backlit LCD display. The internal data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent. 4 addictional
inputs for external push buttons which allow to activate/deactivate the relays.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-XPL4P F1001000090 POWER RECEIVER XPL 4 RELAYS 24V
SEL2641R433-XPL4V F1001000093 POWER RECEIVER XPL 4 RELAYS 230Vac
TECHNICAL SPECIFICATIONS SEL2641R433-XPL4P SEL2641R433-XPL4V ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz SEL2641-MXPL
Modulation
Power supply Keeloq® Hopping code
Relays
Memory AM/ASK
Dimensions (mm)
Enclosure 12 - 24 Vac/dc 230 Vac - 50 Hz
4 x 16A - 230 Vac
500 Tx
155 x 120 x 55
IP55 ( outdoor)
www.erone.com 15
433 MHz RECEIVERS
2 Relays + Wiegand 26-30-44 bit receiver WPL4K
Superetherodyne receiver with ASK demodulation, rolling code, with power supply 12/24 Vac/dc, 2x24 VA relays and output wiegand 26, 30 and 44
bit. The transmitter memorization can be carried out with 4 push-buttons of the receiver or remotely, using only the keys of the transmitter even
making a sequence of 3 pressures of the buttons. The setup of the remaining parameters of the receiver can be done only with the 4 push buttons of
the receiver. All the setting steps are displayed by a backlit LCD display. The internal data base can be protected by a 5-digits password and can be
saved/restored to/from an external memory. The memory allows to store up to 4000 transmitters.
Certification CE
WEEE & RoHS
Part-name Part-Number Description Price ( EUR)
SEL2641R433-WPL4K F1001000095 2 RELAYS + WIEGAND 26-30-44 BIT RECEIVER 433 AM 12/24 Vac/dc 115,00
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK SEL128-MXPL
Modulation 2 x 24VA - 60V
Relays 12 - 24 Vac/dc
Power supply 26 - 30 - 44 bit
Wiegand output 4000 Tx
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
1 Relay NANO Receiver ( 12/24 Vac/dc or 230 Vac )
Very small receiver for indoor applications with 1 relay for resistive loads switch - Power supply 12/24Vac/dc or 230Vac. Step and pulse mode.
Part-name Part-Number Description Certification CE
SEL2641R433-NN F1001000014 RECEIVER NANO 1 RELAY 12/24 Vac/dc WEEE & RoHS
SEL2641R433-NNV F1001000013 RECEIVER ERONE NANO 230V
Wiring diagrams for type NNV
TECHNICAL SPECIFICATIONS SEL2641R433-NN SEL2641R433-NNV
Frequency
Encoding 433,92 MHz
Modulation
Relay Keeloq® Hopping code
Power supply
Memory AM/ASK
Dimensions (mm)
Enclosure 1 x 24 VA ( dry contact) 1
Max switching power
12 - 24 Vac/dc 230 Vac / 50 Hz
85 Tx Buttons
50 x 32 x 20
Indoor IP2X
24 VA - Max 60V 500 W ( resistive load)
16 The Installer’s choice
433 MHz RECEIVERS
Garage door receiver
1 Relay small receiver for indoor applications. Max switching power 24VA.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-GDR F1001000015
GARAGE DOOR RECEIVER 1 RELAY
TECHNICAL SPECIFICATIONS SEL2641R433-GDR
Frequency 433,92 MHz
Encoding
Modulation Keeloq® Hopping code
Power supply AM/ASK
Relay
Memory 12 - 24 Vac/dc
Dimensions (mm) 1 x 24VA
Enclosure
85 Tx Buttons
40 x 22 x 56
IP2X ( Indoor)
230 Vac multi-gang receiver
The multi-gang receiver is a superheterodyne receiver operating at 433.92 MHz in AM / ASK modulation. The power is 230 VAC and the output is at 230
Vac for resistive loads. Plastic enclosure suitable for round and rectangular flush-mounted sockets.
Certification CE
WEEE & RoHS
Part-name Part-Number MULTI-GANG RECEIVER 230V Description
SEL2641R433-MF F1001000077
Wiring diagram
TECHNICAL SPECIFICATIONS SEL2641R433-XPL4P
Frequency 433,92 MHz
Encoding
Modulation Keeloq® Hopping code
Power supply AM/ASK
Switching power
Memory 230 Vac / 50 Hz
Dimensions (mm) 500W resistive
Enclosure 85 Tx Buttons
50,5 x 40 x 16
IP40 ( outdoor)
www.erone.com 17
433 MHz RECEIVERS
Receivers for special applications SEL2641R433-SVM is a receiver card for magnets
SEL2641R433-4IA is a special receiver designed for alarm systems. The 4 Certification CE
relays outputs allow : WEEE & RoHS
• wireless activation/deactivation of the alarm,
• receiver power fealure alarm,
• single transmitter low-battery alarm,
• anti-panic alarm.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-4IA F1001000017 4 RELAYS RECEIVER FOR ALARM SYSTEMS
SEL2641R433-SVM F1001000018 RADIO SWITCH CARD FOR MAGLOCKS
TECHNICAL SPECIFICATIONS SEL2641R433-4IA SEL2641R433-SVM ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz
Modulation
Keeloq® Hopping code
Output
AM/ASK
Power supply
Memory 4 x 24 VA relays w/special 12 Vdc for magnet w/special
Dimensions (mm)
Enclosure functions connector
12 - 24 Vac/dc
85 Tx buttons 10 Tx buttons
80 x 80 x 50 38 x 40 x 18
IP65 ( outdoor ) Receiver card
2 Relays plug-in card receivers
Very small receiver for indoor applications with 1 x 230 Vac relay for resistive loads switch. Step and pulse mode.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-S0 F1001000019 PLUG-IN CARD RECEIVER 2 RELAYS
SEL2641R433-S1 F1001000020 PLUG-IN CARD RECEIVER 2 RELAYS C/CAR
SEL2641R433-S2 F1001000021 PLUG-IN CARD RECEIVER 2 RELAYS C/BEN
SEL2641R433-S9N F1001000025 PLUG-IN CARD RECEIVER 2 RELAYS C/NI
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK
Modulation 2 x 24VA
Relay 12-24 Vac/dc
Power supply 85 Tx buttons
Memory 52 x 46 x 19
Dimensions (mm)
18 The Installer’s choice
433 MHz RADIOPROGRAMMERS
400W Radioprogrammers
Radioprogrammers for the direct driving of 230 Vac asynchronous motors. Self-learning memorization. Adjustable operating time with dip-switch.
Operating modes: automatic, semi-automatic, man-present, mixed.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-P4 F1001000030
SEL2641R433-P4P F1001000031 RADIOPROGRAMMER 400W
RADIOPROGRAMMER 400W PLUS
TECHNICAL SPECIFICATIONS SEL2641R433-P4/P4P ACCESSORIES
Frequency 433,92 MHz SEA433
Encoding
Modulation Keeloq® Hopping code
Power supply AM/ASK
Motor
Memory 230 Vac / 50 Hz
Dimensions (mm) Asyncronous 230 Vac - 400W
Enclosure
85 Tx Buttons
140 x 115 x 53
IP44
750W Radioprogrammer
Radioprogrammer for the direct driving of 230 Vac asynchronous motors. Self-learning memorization. Adjustable operating time with dip-switch. Auxi-
liary NC input for safety devices. Operating modes: automatic, semi-automatic, man-present, mixed.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-P7 F1001000032
RADIOPROGRAMMER 750W
TECHNICAL SPECIFICATIONS SEL2641R433-P7 ACCESSORIES
Frequency 433,92 MHz SEA433
Encoding
Modulation Keeloq® Hopping code
Power supply AM/ASK
Motor
Memory 230 Vac / 50 Hz
Dimensions (mm) Asyncronous 230 Vac - 750W
Enclosure
85 Tx Buttons
140 x 115 x 53
IP44
www.erone.com 19
433 MHz RADIOPROGRAMMERS
750W Radioprogrammer
Radioprogrammer for the direct driving of 230 Vac asynchronous motors. Self-learning memorization. Adjustable operating time with dip-switch. Auxi-
liary NC input - Operating modes: automatic, semi-automatic, man-present, mixed. Additional commands open-stop-close for motor driving on external
keyboard
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-P7E F1001000034 RADIOPROGRAMMER 750W W/EXTERNAL KEYBOARD
TECHNICAL SPECIFICATIONS SEL2641R433-P7E ACCESSORIES
Frequency 433,92 MHz SEA433
Encoding
Modulation Keeloq® Hopping code
Power supply AM/ASK
Motor
Memory 230 Vac / 50 Hz
Dimensions (mm) Asyncronous 230 Vac - 750W
Enclosure
85 Tx Buttons
159 x 118 x 77
IP65
Radioprogrammer for Sun-Blinds
Radioprogrammer for asynchronous motors for sun blinds and rolling shutter - Self-learning transmitter memorization; input for anemometer; Wireless
programming of working time and anemometer speed intervention.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-RM F1001000065 RADIOPROGRAMMER FOR SUN-BLINDS AND ROLLING SHUTTERS
TECHNICAL SPECIFICATIONS SEL2641R433-RM ACCESSORIES
Frequency 433,92 MHz SETR2641-TM
Encoding
Modulation Keeloq® Hopping code SEAN01
Power supply AM/ASK
Motor
Dimensions (mm) 230 Vac / 50 Hz
Enclosure Asyncronous 230 Vac - 400W
Operating temperature
25 x 51 x 154
IP44
-25°C ÷ +55°C
20 The Installer’s choice
433 MHz CROSS REFERENCE
Cross-reference : Receivers 433 MHz ASK
P/N Power supply Relays Contacts Switching Memory IP Dimensions Notes
power ( TX buttons ) ( mm )
SEL2641R433-I 12/24 Vac/dc N° Type NO NO/NC 30 Backup memory ( opt.)
SEL2641R433-XPL 12/24 Vac/dc 2 2P 11 24 VA 85 30 105 x 45 x 28
SEL2641R433-Z1 12/24 Vac/dc 2 P-S-D 11 24 VA 100 (S/N) 65 105 x 45 x 28 2 relays + 1 common relay -
SEL2641R433-Z2 12/24 Vac/dc 1 P-S -1 24 VA 65 80 x 80 x 50 Relays automotive
SEL2641R433-Z4 12/24 Vac/dc 2 P-S 11 24 VA 85 65 80 x 80 x 50
SEL2641R433-C3P 4 3P-S 22 24 VA 85 80 x 80 x 50 5 relays + 1 common relay -
85 56 Relays automotive
12/24 Vdc 2+1 3 S 3- 24V / 30A 108 x 108 x 58
85 56 Relays with sequential
108 x 108 x 58 activation
SEL2641R433-C5P 12/24 Vdc 4+1 5 S 5 - 24V / 30A 85 30
105 x 45 x 28 External buttons input
SEL2641R433-SQR 12/24 Vac/dc 2 P-S 1 1 24 VA 85 55 External buttons input
55 155 x 120 x 55 External buttons input
SEL2641R433-XPL2P 12/24 Vac/dc 2 P-S-D - 2 3,5 KVA 500 (S/N) 55 155 x 120 x 55 External buttons input
SEL2641R433-XPL2V 230 Vac 2 P-S-D - 2 3,5 KVA 500 (S/N) 55 155 x 120 x 55 Wireless TX memorization
SEL2641R433-XPL4P 4 P-S-D - 4 3,5 KVA 500 (S/N) 2X 155 x 120 x 55
SEL2641R433-XPL4V 12/24 Vac/dc 4 P-S-D - 4 3,5 KVA 500 (S/N) 2X DIN Guide - 8 modules
SEL2641R433-NN 230 Vac 1 P-D 1 - 24 VA 2X 50 x 32 x 20 Plug-in card RX
SEL2641R433-NNV 1 P-S 1 - 500 VA 85 - 50 x 32 x 20 Plug-in card RX
SEL2641R433-BD4 12/24 Vac/dc 4 P-S 2 2 3,5 KVA 85 - 85 x 70 x 50 Plug-in card RX
SEL2641R433-S0 / S1 / S4 230 Vac 2 2P 1 1 24 VA 85 - 52 x 46 x 19 Alarm systems
SEL2641R433-S13 1 P/D 1 - 24 VA 85 65 40 x 31 x 12 Magnets
SEL2641R433-S9N 12/24 Vac/dc 2 2P 1 1 24 VA 255 - 44 x 42 x 8 Multi-gang
SEL2641R433-4IA 12/24 Vac/dc 4 3P-S 2 2 24 VA 85 40 80 x 80 x 50
SEL2641R433-SVM 1P direct power 85 55 38 x 40 x 18 Backup memory ( opt.)
SEL2641R433-MF 12 Vdc 1 1P-S 1 - 500 W 10 55 50,5 x 40 x 16 Backup memory ( opt.)
SEL2641R433-XPL5 12/24 Vac/dc 2 P-S-D 1 1 24 VA 85 55 123 x 82 x 41,5 Backup memory ( opt.)
SEL2641R433-XPL54 12/24 Vac/dc 4 P-S-D 3 1 24 VA 500 (S/N) 55 123 x 82 x 41,5 Backup memory ( opt.)
SEL2641R433-XPL1C 12/24 Vac/dc 1 P-S-D - 1 3,5 KVA 500 (S/N) 123 x 82 x 41,5 26-30-44 bit wiegand
SEL2641R433-XPL1V 1 P-S-D - 1 3,5 KVA 500 (S/N) 55 123 x 82 x 41,5
230 Vac 500 (S/N) additional output
12/24 Vac/dc 155 x 120 x 55 Backup memory ( opt.)
12/24 Vac/dc
12/24 Vac/dc
230 Vac
SEL2641R433-WPL4K 12/24 Vac/dc 2 P-S-D 2 - 24 VA 4000 (S/N)
P : PULSE - S : STEP - D : DELAYED
Cross-reference : Radioprogrammers
P/N Power supply Output Switching Memory IP Dimensions Notes
Motor / Load Power ( TX buttons) ( mm )
SEL2641R433-P4 230 Vac 400 W 44 Wireless TX memorization
SEL2641R433-P4P 230 Vac M 400 W 85 44 140 x 115 x 53
SEL2641R433-P7 230 Vac M 750 W 85 44 140 x 115 x 53 Wireless TX memorization
SEL2641R433-P7P 230 Vac M 750 W 85 44 140 x 115 x 53 External keyboard
SEL2641R433-P7E 230 Vac M 750 W 85 65 140 x 115 x 53 Sun-blinds
SEL2641R433-RM 230 Vac M 300 W 85 44 159 x 118 x 77
M 85 25 x 41 x 154
www.erone.com 21
433 MHz TRANSMITTERS
Transmitter ERONE 024A
High security transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures, public or
private access, residential or industrial environment.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
S2TR2641E1 F0204000041 TRANSMITTER ERONE 024A 1 CH
S2TR2641E1H F1002000060 TRANSMITTER ERONE 024A 1 CH W/ TAG HID
S2TR2641E2 F0204000017-A TRANSMITTER ERONE 024A 2 CH
S2TR2641E2H F1002000001 TRANSMITTER ERONE 024A 2 CH W/TAG HID
S2TR2641E4 F0204000018-A TRANSMITTER ERONE 024A 4 CH
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code
Encoding AM/ASK SEMT03
Modulation 1 - 2 - 4 channels SESMT0302
Versions L1028 - 12V
Battery 150 - 250 m
Range ( in open space) 83 x 48 x 16
Dimensions (mm)
Transmitter ERONE 074A
High security transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures, public
or private access, residential or industrial environment. Innovative design with shield shape profile in anodized aluminium and gummed push buttons.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S7TR2641E4.E F1002000049 TRANSMITTER ERONE 074A 4 CH
S7TR2641E4.E-HID F1002000050 TRANSMITTER ERONE 074A 4 CH W/ TAG HID
S7TR2641E4.E-MI F1002000051 TRANSMITTER ERONE 074A 4 CH W/ TAG MIFARE
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation CR2032 - 3V - Lithium
Battery 150 - 250 m
Range ( in open space) 70 x 40 x 13
Dimensions (mm)
22 The Installer’s choice
433 MHz TRANSMITTERS
Transmitter MINI AM
High security mini transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures,
public or private access, residential or industrial environment. Very strong.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
SETR2641AM1 F1002000002 TRANSMITTER ERONE MINI 1 CH
SETR2641AM2.N F1002000003 TRANSMITTER ERONE MINI 2 CH GRAY ANTHRACITE
SETR2641AM2.R F1002000004 TRANSMITTER ERONE MINI 2 CH RED
SETR2641AM2.C F1002000005 TRANSMITTER ERONE MINI 2 CH DARK RED
SETR2641AM2.B F0103000067 TRANSMITTER ERONE MINI 2 CH BLUE
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 1 - 2 channels
Versions 2 x CR2016 Lithium
Battery 100 - 200 m
Range ( in open space) 60 x 36 x 16 mm
Dimensions (mm)
Transmitter Erone 034A
High security transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures, public
or private access, residential or industrial environment.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
S3TR2641T1 F1002000072
S3TR2641T2 F1002000073 TRANSMITTER ERONE 034A 1 CH
S3TR2641T4 F1002000074 TRANSMITTER ERONE 034A 2 CH
TRANSMITTER ERONE 034A 4 CH
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SESM1527
Encoding AM/ASK
Modulation 1 - 2 channels
Versions 2 x CR2016 Lithium
Battery 100 - 200 m
Range ( in open space) 60 x 36 x 16 mm
Dimensions (mm)
www.erone.com 23
433 MHz TRANSMITTERS
Touch Transmitter ERONE TTH
Key free high security transmitter 1 ch. Internal buzzer. Suited for outdoor installations ( IP55). Approaching backlight. Battery low indication.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
TTH2641E1N F0105000012 TOUCH TRANSMITTER ERONE TTH 1CH BLACK
TTH2641E1B F0105000011 TOUCH TRANSMITTER ERONE TTH 1CH WHITE
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation ER14505 - 3,6V Lithium
Battery 200 - 350 m
Range ( in open space) 105 x 70 x 24 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
Key Free High Sensitivity Transmitter
Key free high sensitivity transmitter 1 ch. - Infrared Sensor - Adjustable detection range. - Internal buzzer. Suited for outdoor installations ( IP55).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
FKTHS2641E1 F1002000026 KEYFREE HIGH SENSITIVITY TRANSMITTER
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation CR123A - 3V Lithium
Battery 200 - 400 m
Range ( in open space) 60 x 90 x 27 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure 1 - 18 cm ( adjustable)
Detection range
24 The Installer’s choice
433 MHz TRANSMITTERS
Wall Transmitter
4 channel wall fixing transmitter for awnings and sun blinds systems. Gummed buttons. Elegant and suitable to any architectural context.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
SETR2641-TM F1002000028 TRANSMITTER ERONE 433 4CH WALL VERSION
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 4 channels
Versions 1 x CR2032 Lithium
Battery 100 - 200 m
Range ( in open space) 80 x 80 x 25 mm
Dimensions (mm)
Outdoor 230 Vac Transmitter
230 Vac 1 ch high security transmitter. Suited for outdoor installations ( IP65).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
TSW2641E1 F1002000010
OUTDOOR 230V TRANSMITTER
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 1 channel
Versions 230 Vac / 50 Hz
Supply 100 - 500 m
Range ( in open space) 66,5 x 82 x 66 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
www.erone.com 25
433 MHz TRANSMITTERS
Wireless keypad
Best use where an encoded radio signal must control gates, garage doors, rolling shutters, sun-blinds, anti-burglar appliances, lightings, etc. The tran-
smission is enabled only after the dialing of a security user code. There are 6 standard channels which can activate 6 different receivers or relays + 2
service channels for battery low and tamper-open transmission. Internal memory for 22 different security User codes and 1 Master code.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
SEDK2641A4 F1002000011 WIRELESS KEYPAD ( PLASTIC ENCLOSURE )
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation CR123A - 3V Lithium
Battery 150 - 500 m
Range ( in open space) 145 x 78 x 32 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure 6+2
Channels 22 user codes + 1 master code
Memory
Metal wireless keypad
Backlit compact metal radio keypad Wireless RF keypad, polished heavy duty Zamak® cast alloy. Surface mount with Torx® screws. Partially sealed with
epoxy. 22 User codes - 4 or 5 digits. 1 Master code - 5 digits. Audible and visual feedback.
HIGH RESISTANCE Certification CE
TO VANDALISM WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
GALEOR F1002000029
WIRELESS KEYPAD METAL
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation LS14500 - 3,6V Lithium
Battery 150 - 300 m
Range ( in open space) 112 x 77 x 27 mm
Dimensions (mm) IP64 ( outdoor)
Enclosure 22 user codes + 1 master code
Memory A,B
Channels 4 or 5 digits
Security code
26 The Installer’s choice
433 MHz TRANSMITTERS
DIN mount transmitter
DIN mount high security transmitter with rolling code security system, encoded in factory in unreproducible and encrypted way. Best use for industrial
and / or domestic transmissions. 4 inputs for NO contacts which generate the transmission. Compatible with all the receivers of the range Erone 433
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SETMC433-BD F1001000016
DIN MOUNT TRANSMITTER
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA433
Encoding AM/ASK
Modulation 4 channels
Versions 12 - 24 Vac/dc
Power 200 - 400 m
Range ( in open space) 80 x 80 x 25
Dimensions (mm)
Mains supply transmitter
A discreet, 230 Vac triggered transmitter which emits a RF radio signal when powered, and continues for the duration of the supply up to 25 seconds.
At the end of this period the RF terminates and a new transmission will be made when powered again. Enclosure suitable for round and rectangular
flush-mounted sockets.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
TMF2641E1 F1002000086 MULTI-GANG TRANSMITTER 1CH 230 V
TECHNICAL SPECIFICATIONS 433,92 MHz ANTENNA Ext. push button
Frequency Keeloq® Hopping code ( not included)
Encoding AM/ASK
Modulation 1 channel 27
Versions 230 Vac / 50 Hz
Supply 150 - 200 m
Range ( in open space) 66,5 x 82 x 66
Dimensions (mm) IP55 ( outdoor)
Enclosure
www.erone.com
433 MHz TRANSMITTERS
Module transmitter 1 CH
Encoded transmitter module 1 channel with security code Keeloq® hopping code. Wire antenna. 9V battery supply. Activation through C-NO external
contact ( not provided ).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SETMC1C9V F1002000024 ENCODED TRANSMITTER MODULE 1 CHANNEL 9V
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 9V ( not provided )
Battery 150 - 400 m
Range ( in open space) 45 x 28 x 6
Dimensions (mm)
Transmitter ERONE S6 - 18 CH
ERONE S6TL2641E15 is designed to drive automatic gate systems, rolling shutters and alarm systems, thanks to its very high security coding system.
(KeeLoq® Hopping code). The device is equipped with 4 buttons : A, B , C, D, through which it is possible to transmit up to 18 different commands.
The button C selects the channel and the buttons A, B and D activate the radio transmission. The security code is set-in-factory and it is composed by
a S/N, a manufacturer key and by a counter. The full code string is encrypted. Each transmitter has 5+1 serial number pre-programmed, one for each
channel. The 5 LED give the status of the corresponding activated channel.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S6TL2641E15 F1002000082
18 CHANNELS TRANSMITTER S6
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SESMT0608
Encoding AM/ASK
Modulation CR2032 3V - Lithium
Battery 100 - 200 m
Range ( in open space) 117 x 47 x 20
Dimensions (mm) 6
Channels 3x6
Functions
28 The Installer’s choice
433 MHz TRANSMITTERS
Transmitter ERONE 15 CH
ERONE SATL2641E15 is designed to drive automatic gate systems, rolling shutters and alarm systems thanks to its very high security coding system.
(KeeLoq ® Hopping code). The device is equipped with 4 buttons : CLOSE, OPEN , STOP, CHANNEL, through which it is possible to transmit up to 15
different commands. The button CHANNEL selects the channel and the buttons OPEN, CLOSE and STOP activate the radio transmission. The security
code is set-in-factory and it is composed by a S/N, a manufacturer key and by a counter. The full code string is encrypted. Each transmitter has got 5
different S/N, one for each channel. The 4 LED give the status of the corresponding activated channel.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SATL2641E15 F1002000061
15 CHANNELS TRANSMITTER
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Keeloq® Hopping code SESMT0208
Encoding AM/ASK
Modulation 3x5
Functions 5
Channels L1028 - 12V
Battery 100 - 200 m
Range ( in open space) 83 x 48 x 16 mm
Dimensions (mm)
Cross-reference : 433 MHz AM/ASK Keeloq® Transmitters
P/N Keys P.Supply Dim. ( mm ) Range Erp ( μW) Serialized w/Tag
S2TR2641E1 1 L1028 12V 83 x 48 x 16 150 - 250 m 100-200 No
S2TR2641E1H 1 L1028 12V 83 x 48 x 16 150 - 250 m 100-200 HID
S2TR2641E2 2 L1028 12V 83 x 48 x 16 150 - 250 m 100-200 No
S2TR2641E2H 2 L1028 12V 83 x 48 x 16 150 - 250 m 100-200 HID
S2TR2641E4 4 L1028 12V 83 x 48 x 16 150 - 250 m 100-200 No
S2TR2641E2M 2 L1028 12V 83 x 48 x 16 150 - 250 m 100-200
S3TR2641T1 1 CR 2032 3V 74 x 36 x 9 100 - 200 m 100-150 Master TX
S3TR2641T2 2 CR 2032 3V 74 x 36 x 9 100 - 200 m 100-150 No
S3TR2641T4 3 CR 2032 3V 74 x 36 x 9 100 - 200 m 100-150 No
S7TR2641E4 4 CR 2032 3V 70 x 40 x 13 100 - 200 m 100-150 No
S7TR2641E4T 4 CR 2032 3V 70 x 40 x 13 100 - 200 m 100-150 No
S7TR2641E4TM 4 CR 2032 3V 70 x 40 x 13 100 - 200 m 100-150 HID
SETR2641AM1 1 2 x CR 2016 3V 60 x 36 x 16 100 - 200 m 100-150
SETR2641AM2.N 2 2 x CR 2016 3V 60 x 36 x 16 100 - 200 m 100-150 Mifare
SETR2641AM2.R 2 2 x CR 2016 3V 60 x 36 x 16 100 - 200 m 100-150 No
SETR2641AM2.C 2 2 x CR 2016 3V 60 x 36 x 16 100 - 200 m 100-150 No
SETR2641AM2.B 2 2 x CR 2016 3V 60 x 36 x 16 100 - 200 m 100-150 No
SETR2641-TM 4 2 x CR 2025 3V 80 x 80 x 25 100 - 200 m 100-200 No
TSW2641E1 1 66,5 x 82 x 66 100 - 800 m No
SEDK2641A4 230 Vac 145 x 78 x 32 150 - 700 m 3 mW No
GALEOR 6+2 CR 123A 112 x 77 x 27 150 - 700 m 6 mW No
TTH2641E1B 2 LS14500 3,6V 105 x 70 x 24 150 - 350 m 6 mW No
TTH2641E1N 1 LS14505 3,6V 105 x 70 x 24 150 - 350 m 200-400 No
FKTHS2641E1 1 LS14505 3,6V 90 x 60 x 27 200 - 400 m 200-400 No
TMF2641E1 1 CR 123A 50,5 x 40 x 16 150 - 200 m 200-400 No
SETMC1C9V 1 230 Vac 45 x 28 x 6 100-150 No
SETMC433-BD 1 60 x 90 x 30 400 m 500 No
S6TL2641E15 4 9V 117 x 47 x 20 200 - 400 m 1,5 mW No
SATL2641E15 18 12 / 24 Vac/dc 83 x 48 x 16 100 - 200 m 100-400 No
15 CR 2032 3V 100 - 200 m 150-200 No
No
L1028 12V
www.erone.com 29
ERONE 128
128 BIT VERY HIGH SECURITY REMOTE CONTROLS
Transmitter ERONE 128 bit
The transmitter Erone type S3TR128Ex is a very high security transmitter with GFSK modulation.The high degree of security is ensured by a 128-bit serial
number, with a AES128 encryption and by a proprietary “rolling code algorithm” that avoids the risk of the scan and the subsequent retransmission of the
code copied. A special system keeps aligned transmitter and receiver. An innovative feature allows to set up the autostore capability of a new transmitter
using a remote control already in memory, which enables it by proximity. This avoids to access the receiver for memorizing a new remote control.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S3TR128E2 F1002000089
S3TR128E4 F1002000090 TRANSMITTER ERONE 128 2CH
TRANSMITTER ERONE 128 4CH
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Rolling SESM1527
Security code AES 128
Encoding system GFSK
Modulation 2 - 4 channels
Versions 1 x CR2032 Lithium
Battery 150 - 200 m
Range ( in open space) 72 x 36 x 12
Dimensions (mm)
Receiver WPL128 bit
The type SEL128R433-WPL is a very high security superheterodyne receiver with GFSK demodulation. The high degree of security is ensured by a 128-bit
serial number, with a AES128 encryption and by a proprietary “rolling code algorithm” that avoids the risk of the scan and the subsequent retransmission
of the code copied. A special system keeps aligned transmitter and receiver. An innovative feature allows to set up the autostore capability of a new trans-
mitter using a remote control already in memory, which enables it by proximity. This avoids to access the receiver for memorizing a new remote control.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL128R433-WPL F1001000094 128 BIT RECEIVER 2 RELAYS + WIEGAND
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency AES 128 - Rolling SEA433
Encoding GFSK SEL128-MXPL
Modulation 2 relays / wiegand
Output 2 x 24 VA - 48 Vmax
Relays 26, 30, 44 bit
Wiegand protocol 12- 24 Vac/dc
Power supply 500 TX
Memory Pulse, step, delayed
Relay operating mode 1 sec - 24 h adjustable
Delay 120 x 80 x 40
Dimensions (mm) IP55 ( outdoor)
Enclosure
www.erone.com 31
FIXED CODE
FIXED CODFEIXREEDMCOOTDEECONTROLS
Transmitter ERONE DS433
The radiocontrols Erone series DS433 can drive any type of automatic systems in residential or industrial enviroment, for public or private. The security
code is fixed and can be set with a 9 ways three state dip-switch.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number Description
SETDS39433E2 F1002000015
SETDS39433E4 F1002000016 TRANSMITTER ERONE DS433 2 CH
TRANSMITTER ERONE DS433 4 CH
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency 9 ways tree-state dip-switch SESMT0230
Encoding AM/ASK
Modulation 2 - 4 channels
Versions L1028 9V
Battery 100 - 200 m
Range ( in open space) 19683
Code combinations 83 x 48 x 16
Dimensions (mm)
Transmitter ERONE S2TL
The fixed code transmitters Series S2TL can drive any automatic opening device in industrial, domestic or residential environment, private or pubblic. The
security code is fixed and set-in-factory . The max number of combinations is 19683. The transmitter can operate with any receiver of the series Erone
433 fixed code. The internal coil allows to copy the s/n from any other transmitter of the range Erone “fixed code”.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S2TL39433E2 F1002000083 TRANSMITTER ERONE 024A FIXED CODE 3EXP39 2CH
S2TL39433E4 F1002000084 TRANSMITTER ERONE 024A FIXED CODE 3EXP39 4CH
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Fixed 3exp9
Encoding AM/ASK SEMT03
Modulation 2 - 4 channels SESMT0302
Versions L1028 9V
Battery 150 - 250 m
Range ( in open space) 19683
Code combinations 83 x 48 x 16
Dimensions (mm)
www.erone.com 33
FIXED CODE
2-CH autocopy mini transmitter
The fixed code transmitters Series Mini Autocopy can drive any automatic opening device in industrial, domestic or residential environment, private or
pubblic. The security code is fixed and set-in-factory . The max number of combinations is 19683. The transmitter can operate with any receiver of the
series Erone 433 fixed code. The internal coil allows to copy the s/n from any other transmitter of the range Erone “fixed code”.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SETL39433AM2.K F1002000085 TRANSMITTER MINI FIXED CODE 3EXP9 AUTOCOPY
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Fixed 3exp9
Encoding AM/ASK
Modulation 19683
Combinations 2 x CR2016 Lithium
Battery 2 channels
Versions 100 - 200 m
Range ( in open space) 60 x 36 x 16 mm
Dimensions (mm)
2 Relays standard receiver
Superheterodyne single conversion receiver with 2 x 24VA relays - Self-learning memorization - Pulse output relays.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL39R433-I F1002000035
2 RELAYS STANDARD RECEIVER
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Fixed 3exp9 SEA433
Encoding AM/ASK
Modulation 19683
Combinations 12 - 24 Vac/dc
Supply 100 TX
Memory 2 x 24 VA
Relays IP30 ( Indoor )
Enclosure 105 x 45 x 28
Dimensions (mm)
34 The Installer’s choice
FIXED CODE
1 - 2 - 4 Relays MINI receivers
Receivers with 1, 2 or 4 output 24VA relays. Self-learning memorization. Pulse or step mode for 1 relay.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL39R433-M1 F1001000038
SEL39R433-M1 F1001000039 RECEIVER MINI 1 RELAY 433 DP9
SEL39R433-M1 F1001000040 RECEIVER MINI 2 RELAYS 433 DP9
RECEIVER MINI 4 RELAYS 433 DP9
TECHNICAL SPECIFICATIONS 433,92 MHz ACCESSORIES
Frequency Fixed code 3exp9 SEA433
Encoding AM/ASK
Modulation 1 - 2 - 4 Relays 24VA
Versions 100 Tx
Memory 12 / 24 Vac/dc
Power supply 80 x 80 x 50 mm
Dimensions (mm) IP56 ( outdoor)
Enclosure
www.erone.com 35
868 MHz
TRANSMITTERS 868 MHz
Transmitter ERONE 028A
High security transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures, public
or private access, residential or industrial environment.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S2TR2681E2 F1006000001
S2TR2681E4 F1006000002 TRANSMITTER ERONE 028A 2 CH
TRANSMITTER ERONE 028A 4 CH
TECHNICAL SPECIFICATIONS 868,30 MHz ACCESSORIES
Frequency Keeloq® Hopping code
Encoding AM/ASK SEMT03
Modulation 2 - 4 channels SESMT0302
Versions L1028 12V
Battery 150 - 250 m
Range ( in open space) 83 x 48 x 16
Dimensions (mm)
Transmitter MINI 868 MHz
High security mini transmitter with rolling code technology, encoded in factory in encrypted and unreproducible way. Best use in automatic closures,
public or private access, residential or industrial environment. Adviced where 433 MHz is saturated. Actractive design, ergonomical shape. Gummed
finishing touch.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SETR2681AM2 F1006000004 TRANSMITTER ERONE MINI 868 2 CH
TECHNICAL SPECIFICATIONS 868,30 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 2 channels
Versions CR 2032 Lithium
Battery 100 - 200 m
Range ( in open space) 60 x 36 x 16
Dimensions (mm)
www.erone.com 37
RECEIVERS 868 MHZ
2 Relays receiver XPL 868 MHz
Superheterodyne single conversion receiver with 2 x 24VA relays Programming of transmitters can be carried out either directly on the receiver using the 2
push buttons, or remotely using the buttons of the transmitter. General parameters of the receiver (relay time etc) can only be done using the 2 push but-
tons of the receiver. All programming steps are displayed on the backlit LCD display. The internal data can be saved/restored to/from an external memory.
Certification CE
WEEE & RoHS
FC Certification FCC
Part-name Part-Number RECEIVER 2 RELAYS 868 AM XPL Description
SEL2681R868-XPL F1007000009
ACCESSORIES
TECHNICAL SPECIFICATIONS 868,30 MHz SEA868
Frequency Keeloq® Hopping code SEL2641-MPL
Encoding AM/ASK
Modulation 2 x 24VA
Relays 12 - 24 Vac/dc
Power supply 100 Tx
Memory 105 x 45 x 28
Dimensions (mm) Transparent - IP30
Enclosure
1 relay NANO receiver 868 MHz
Very small receiver for indoor applications with 1 x 24 VA output relay.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2681R868-NN F1007000010 RECEIVER NANO 868 MHz 1 RELAY 12/24 Vac/dc
TECHNICAL SPECIFICATIONS 868,30 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 1 x 24 VA
Relays 12 - 24 Vac/dc
Power supply 85 Tx Buttons
Memory 50 x 32 x 20
Dimensions (mm) Indoor IP2X
Enclosure
38 The Installer’s choice
RECEIVERS 868 MHZ
1 - 2 - 4 relays MINI receivers 868 MHz
Receivers with 1, 2 or 4 output 24 VA relays. Self-learning memorization. Pulse or step mode for 1 relay.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2681R868-Z1 F1005000002
SEL2681R868-Z2 F1005000003 RECEIVER MINI 1 RELAY 868 AM
SEL2681R868-Z4 F1005000004 RECEIVER MINI 2 RELAYS 868 AM
RECEIVER MINI 4 RELAYS 868 AM
TECHNICAL SPECIFICATIONS SEL2681R868-Z1 SEL2681R868-Z2 SEL2681R868-Z4 ACCESSORIES
Frequency SEA868
Encoding 868,30 MHz
Modulation
Relays Keeloq® Hopping code
Power supply
Memory AM/ASK
Dimensions (mm)
Enclosure 1 x 24VA 2 x 24VA 4 x 24VA
12 - 24 Vac/dc
85 TX buttons
80 x 80 x 50
IP65 ( outdoor)
4 Relays receiver XPL54 868 MHz
Superheterodyne single conversion receiver with 4 x 24VA relays . Transmitters pairing can be carried out either directly on the receiver using the 2 push
buttons, or remotely using the buttons of the transmitter. General parameters of the receiver (relay time etc) can only be set using the 2 push buttons
of the receiver.
All programming steps are displayed on the backlit LCD display. The internal data can be saved/restored to/from an external memory ( optional).
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2681R868-XPL54 F1007000011 RECEIVER 4 RELAYS 868 AM 500 USERS
TECHNICAL SPECIFICATIONS 868,30 MHz ACCESSORIES
Frequency Keeloq® Hopping code SEA868
Encoding AM/ASK SEL2641-MPL
Modulation 4 x 24VA
Relays 12 - 24 Vac/dc www.erone.com
Power supply 500 Tx
Memory 123 x 82 x 41,5 mm
Dimensions (mm) IP55 ( outdoor)
Enclosure
39
RECEIVERS 868 MHZ
1 Relay receiver XPL 868 MHz
Superheterodyne single conversion receiver with 1 power relay and power supply 12 - 24 Vac/dc or 230 Vac. Programming of transmitters can be car-
ried out either directly on the receiver using the 2 push buttons, or remotely using the buttons of the transmitter. Utility for block memorization of the
transmitters.
General parameters of the receiver (relay time etc) can only be done using the 2 push buttons of the receiver. All programming steps are displayed on
the backlit LCD display. The internal data can be saved/restored to/from an external memory. Cover in polycarbonate black semitransparent.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2681R868-XPL1P F1007000012 1 POWER RELAY RECEIVER 868 AM 500 USERS - 12/24 Vac/dc
SEL2681R868-XPL1V F1007000013 1 POWER RELAY RECEIVER 868 AM 500 USERS - 230 Vac
TECHNICAL SPECIFICATIONS SEL2681R868-XPL1P SEL2681R868-XPL1V ACCESSORIES
Frequency SEA868
Encoding 868,30 MHz SEL2641-MPL
Modulation
Relays Keeloq® Hopping code
Power supply
Memory AM/ASK
Dimensions (mm)
Enclosure 1 x16A - 230 Vac
12 - 24 Vac/dc 230 Vac / 50 Hz
500 Tx
123 x 82 x 41,5
IP55 ( Outdoor)
Cross-Reference Range 868 MHz
TRANSMITTERS 868 MHz AM Keeloq® Hopping code
P/N Keys Battery Dim. ( mm ) Range Erp ( μW) Serialized w/Tag
S2TR2681E2 2 L1028 12V 83 x 48 x 16 150 - 200 m 100-200 No
S2TR2641E4 4 L1028 12V 83 x 48 x 16 150 - 200 m 100-200 No
SETR2681AM2 2 CR 2032 3V 60 x 36 x 16 100 - 150 m 100-150 No
RECEIVERS 868 MHz AM Keeloq® Hopping code
P/N Power supply Relays Contacts Switching Memory IP Dimensions Notes
power ( TX but- ( mm ) Backup memory ( opt.)
SEL2681R868-XPL 12/24 Vac/dc N° Type NO NO/NC
SEL2681R868-Z1 12/24 Vac/dc 2 P-S-D 11 24 VA tons ) 30 105 x 45 x 28 Wireless TX memorization
SEL2681R868-Z2 12/24 Vac/dc 1 P-S -1 24 VA 65 80 x 80 x 50 Backup memory ( opt.)
SEL2681R868-Z4 12/24 Vac/dc 2 P-S 11 24 VA 100 (S/N) 65 80 x 80 x 50 Backup memory ( opt.)
SEL2681R868-NN 12/24 Vac/dc 4 3P-S 22 85 Backup memory ( opt.)
SEL2681R868-XPL54 12/24 Vac/dc 1 P-D 1- 24 VA 85 65 80 x 80 x 50
SEL2681R868-XPL1V 4 P-S-D 31 24 VA 2X 50 x 32 x 20
SEL2681R868-XPL1P 230 Vac 1 P-S-D -1 24 VA 85 55 123 x 82 x 41,5
12/24 Vac/dc 1 P-S-D -1 3,5 KVA 85 55 123 x 82 x 41,5
3,5 KVA 500 (S/N) 55 123 x 82 x 41,5
500 (S/N)
500 (S/N)
40 The Installer’s choice
WIRELESS DEVICESS 433 MHZ
Encoded RF modules
Encoded radio modules ( transmitter and receivers ) for OEM applications.
SETMC433 SELxxR433-PP4 SELxxR433-OC4
P/N Description Freq.(MHz) Erp Power Sup. Encoding
SETMC433 ENCODED TRANSMITTER MODULE 433 MHz AM 433,92 +10dBm 12V Keeloq Hopping code
SEL2641R433-OC4 RX MODULE ERONE433 4CH OPEN-COLLECTOR 433,92 12V Keeloq Hopping code
SEL2641R433-PP4 RX MODULE ERONE433 4CH PUSH-PULL 433,92 - 12V Keeloq Hopping code
SEL2641R433-PP45 RX MODULE ERONE433 4CH PUSH-PULL 5Vdc 433,92 - 5V Keeloq Hopping code
SEL39R433-PP4 RX MODULE ERONE433 4CH PUSH-PULL 433,92 - 12V
SEL39R433-OC4 RX MODULE ERONE433 4CH OPEN-COLLECTOR 433,92 - 12V Fixed - 3exp9
- Fixed - 3exp9
Radiocontrolled Maglocks
Direct or wireless transmitter memorisation, Full memory erasure, Single transmitter cancelling, C-NO or C-NC output contact ( selectable )
Direct magnet unlock with C-NO push-button, Compatible with any type of Erone transmitter
300 Kg 400 Kg 500 Kg
Part-name Part-Number Description
F05-ML660R2641 F0535000043 300 KG RADIOCONTROLLED MAGLOCK
F05-ML880R2641 F0535000044 400 KG RADIOCONTROLLED MAGLOCK
F05-ML1100R2641 F0535000046 500 KG RADIOCONTROLLED MAGLOCK
TECHNICAL SPECIFICATIONS F05-ML660R2641 F05-ML880R2641 F05-ML1100R2641
Frequency
Encoding 433,92 Mhz
Modulation
Power supply Keeloq® Hopping code
Memory
Operating temperature AM/ASK
Unlock time
Detection force 12 Vdc
Maglock dimensions (mm)
Armature dimensions (mm) 40 Tx
from - 4°C to +70°C
1 - 10 sec. ( 4 sec. by default )
300 Kg 400 Kg 500 Kg
254 x 45 x 28 254 x 50 x 29 273 x 67 x 41
185 x 38 x 11 185 x 45 x 12 185 x 60 x 12
www.erone.com 41
WIRELESS DEVICES
Two-way devices
Two-ways devices for an half-duplex radio system. Transmission of the message from the transmitter and direct feedback from the actuator.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
S2TR2641TW F1002000021 TWO-WAY TRANSMITTER ERONE 433 MHz 2 KEYS
SEL2641R433-TW F1001000055 TWO-WAY RECEIVER 2 RELAYS 433 MHz
SEK2641TW F1001000056 TWO-WAY KIT ( SEL2641R433-TW + S2TR2641TW)
TECHNICAL SPECIFICATIONS SEL2641R433-TW S2TR2641TW
Frequency 433,92 MHz
Encoding
Modulation Keeloq® Hopping code
Relays
Power supply AM/ASK
Battery
Memory 2 x 24VA -
Dimensions (mm)
Enclosure 12 - 24 Vac/dc 12V
Range
- L1028 - 12 Vdc
100 Tx -
121 x 70 x 25 83 x 48 x 16
Transparent - IP30 -
40 - 70 m
RF Repeater Certification CE
WEEE & RoHS
Radio repeater with high RF output power. Allows to extend the range of a transmitter Erone. Power supply 230 Vac.
Part-name Part-Number Description
SER2641R4T4 F1001000053 433 MHz KEELOQ® HOPPING CODE REPEATER
TECHNICAL SPECIFICATIONS 433,92 MHz
Frequency Keeloq® Hopping code
Encoding AM/ASK
Modulation 230 Vac / 50 Hz
Power supply 50 Tx
Memory 105 x 59 x 85
Dimensions (mm) IP40
Enclosure
42 The Installer’s choice
WIRELESS DEVICESS
Multiuser receivers
Multiuser receivers for common entries management as parkings, basins, garages, common parts, with 800, 1600 users. 2 security access levels: master
and standard user. I/F RS232 for PC with software PCCOM. Needs a Master transmitter for the set-up.
Part-name Part-Number Description
SEL2641R433-K8 F0204000029 MULTIUSER RECEIVER 800 USERS
SEL2641R433-K8P F0204000030 MULTIUSER RECEIVER 800 USERS PCCOM
SEL2641R433-K16P F0204000031 MULTIUSER RECEIVER 1600 USERS PCCOM
TECHNICAL SPECIFICATIONS SEL2681R868-K8 SEL2681R868-K8P SEL2681R868-K16P ACCESSORIES
Frequency 800 TX SEA433
Encoding 433,92 S2TR2641E2M
Modulation SEL2641-MEMB
Relays Keeloq® Hopping code SEL2641-KITP8
Memory
Power supply AM/ASK
Enclosure
Dimensions (mm) 2 x 24 VA
800 TX 1600 TX
12 - 24 Vac/dc
IP30 ( Indoor )
180 x 140 x 68
PCCOM : Connection with PC with management sw
Wiegand / Clock & Data receiver
Superheterodyne receiver with Wiegand DATA0 e DATA1 open drain outputs or Clock & Data output format. Selflearning transmitter memorization.
NRZ CLOCK
DATA 0 DATA
DATA 1
Wiegand Clock & data
The types SELWR433 and SELCD4A don’t store the S/N of the transmitters but convert only the S/N+FC into wiegand. The type SELWR433-800 memorizes
even the transmitters S/N ( up to 800 ) checking the rolling code feature.
Part-name Part-Number Description
SELWR433 F0103000069
SELCD4A F1001000066 WIEGAND RECEIVER
SELWR433-800 F0103000069-B CLOCK & DATA RECEIVER 433 MHz
WIEGAND RECEIVER 800 USERS
TECHNICAL SPECIFICATIONS SELWR433 SELCD4A SELWR433-800 ACCESSORIES
Frequency SEA433
Encoding 433,92 MHz Wiegand 26 bit
Modulation 800 Tx 43
Power supply Keeloq® Hopping code
Output
Memory AM/ASK
Dimensions (mm)
Enclosure 12 - 24 Vac/dc
Wiegand 26 Bit Clock & Data
Only filtering
105 x 45 x 28
IP30 ( Indoor)
www.erone.com
WIRELESS DEVICES
26 - 30 bit wiegand receiver
Superheterodine receiver with wiegand output - wiegand 26 or wiegand 30 bit output type. The wiegand 30 bit architecture allows to send out : the
FACILITY CODE the SERIAL NUMBER of the transmitter and 4 bits with the information about the BUTTON activated.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SELW2630MF F0103000067
26-30 BIT WIEGAND RECEIVER
TECHNICAL SPECIFICATIONS SELW2630MF ACCESSORIES
Frequency 433,92 MHz SEA433
Encoding
Modulation Keeloq® Hopping code
Output AM/ASK
Power supply
Dimensions (mm) Wiegand 26 , Wiegand 30
Enclosure 12 - 24 Vac/dc
128 x 128 x 57
IP55 ( Outdoor)
Plug-in wiegand receivers for CDVI Atrium A22
The receiver ERONE type SELW30R433-SAT is a plug-in receiver card, operating at 433,92 Mhz in AM/ASK modulation. The receiver has a 26-bit wiegand
or 30-bit wiegand output. The output connector of the card can be fitted into one of the 2 connectors of the access control panel CDVI Atrium, type AC22,
marked Reader 1 or Reader 2. The receiver is provided with an external tuned antenna which can be fixed on the Atrium metal box.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SELWR433-SAT F1001000079 26-BIT WIEGAND OUTPUT PLUG-IN RECEIVER
SELW30R433-SAT F1001000081 30-BIT WIEGAND OUTPUT PLUG-IN RECEIVER
TECHNICAL SPECIFICATIONS SELWR433-SAT SELW30R433-SAT READER 2
Frequency 12V Z6 GND Z7 Z8 GND Z9 Z10
Encoding 433,92 MHz
Modulation INPUTS
Output 1
Power supply 12V Z1 GND Z2 Z3 GND Z4 Z5 2
Dimensions (mm) Keeloq® Hopping code Plug-in the card into the 7-way
connector READER1 or
AM/ASK READER 1 READER2 of the Atrium mother
board A22
Wiegand 26 Wiegand 30
12 - 24 Vac/dc
128 x 128 x 57 BELL
C1 NO1 NC1 C2 NO2 NC2 AC22 BATT.
DOOR 2 2-Door Controller
LOCAL POWER
BUS SUPPLY
44 The Installer’s choice
WIRELESS DEVICES
Wireless access control system
Double technology multiuser receiver ( radiofrequency with Rolling code security protocol and wiegand for passive tags ). Best use for common entry
facilities as parkings, garages, condominiums, basins, etc, with RF transmitter or passive tag. The internal GSM or PTN or Wifi modem ( optional ) allow
the remote management of the structure. SW “Site manager” included.
Certification CE
WEEE & RoHS
Part-name Part-Number Description
SEL2641R433-EP100 F0114000008 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V PLASTIC BOX
SEL2641R433-EP101 F0114000009 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V PLASTIC BOX w/PSTN MODEM
SEL2641R433-EP102 F0114000010 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V PLASTIC BOX w/GSM MODEM
SEL2641R433-EP103 F0114000013 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V PLASTIC BOX w/Wifi MODULE
SEL2641R433-EM100 F0114000001 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V METAL BOX
SEL2641R433-EM10G F0114000002 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V METAL BOX w/GSM MODEM
SEL2641R433-EP10P F0114000003 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 12/24V METAL BOX w/PSTN MODEM
SEL2641R433-EM200 F0114000004 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX
SEL2641R433-EM20G F0114000005 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX w/GSM MODEM
SEL2641R433-EM20P F0114000011 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX w/PSTN MODEM
SEL2641R433-EM210 F0114000012 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX w/ Batt 7Ah
SEL2641R433-EM21P F0114000006 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX w/ Batt 7Ah w/PSTN Modem
SEL2641R433-EM21G F0114000007 DOUBLE TECHNOLOGY MULTIUSER RECEIVER ERMU 230V METAL BOX w/ Batt 7Ah w/GSM Modem
Connections RX2 RX3 RX64
USB RS-485
Antenna RF
Antenna GSM
230 Vac Telephone line
+12V
Relay 1
Relay 2
Relay 3
Relay 4
Exit button1
Exit button2
Wiegand1 Wiegand2
www.erone.com 45
WIRELESS DEVICES
MAIN FUNCTIONS TECHNICAL FEATURES
Stand-alone / Network operating mode 433,92 MHz AM embedded radio receiver
User data base management [ user memo, delete, multiple memorization, 2 Inputs for 26-bit wiegand readers
enable, disable 4 x 24VA output relays with C-NO and C-NC-NO
Relay operating mode [ momentary, step, delayed ] 2 Inputs for C-NO exit-buttons
10 Time zones USB Device input for connection to PC
Event log Connection for GSM or PTN modem [optional ]
Antipassback [ for wiegand inputs ] Wifi module [optional ]
Detailed setup for RS485 multidrop network and modem PTN / GSM calls I/F RS485 for network in multidrop
Detailed setup for modem GSM / PTN call 4000 Users / 4000 Events
Site password and PC connection password Real Time Clock with CR2032 backup battery
Management software SITE MANAGER for Windows [Xp, Windows7 ] 230 Vac - 24 Vac/dc power supply with 12Vdc backup battery
Stand alone users management with push button or with master transmitter Embedded battery charger circuit
Input for 12 Vdc power supply
Web Server Metallic box dimensions: ( L x H x P ) : 298 x 285 x 78 mm.
IP55 plastic box dimensions ( L x H x P ) : 319 x 223 x 100 mm
The controller ERMU, with the MD-WIFI on board, operates, by factory, as WIFI Access Point. You can connect with it from your access device ( PC, Tablet
or Smartphone) through a point-to-point communication, detecting first of all the wifi field generated by the module. The module MD-WIFI generates
a proper Wifi field, with proper coordinates, manages the LAN connection and generates a Data-base of information correlated with the information
memorized in the controller Ermu.
Controller ERMU Module MD-WIFI
Data-base Data-base
S/N Remote controls + Users names +
S/N Proximity cards Anagraphic information
The module acting as Web-server, allows the controller to operate in 3
different modes:
- WiFi Access Point (AP) [Factory setting ] Example of Web Page generated by MD-WIFI
In this case the web server generates an indipendent wifi field that can be
connected through a point-to-point from any wifi device ( mobilephone,
Tablet, PC, etc,) ;
- WiFi Station
The Ermu with its own web server can be connected to a local wifi router,
assigning an IP address ( static or in DHCP). You need to specify the network
parameters as the IP address, the Subnetmask, the Gateway address, etc.
- LAN ( Client)
The LAN module allows to make Ermu as part of a LAN. Even in that case you
must specify the network parameters.
Site Manager
The software “Site manager” allows the management of the
controllers Ermu under Windows ( XP, Windows 7, Windows 8).
It allows the configuration of the parameters for each controller
connected by USB, or RS485, or through the modems ( GSM, PSTN),
the setting of the parameters TCP-IP, the operating mode of the
relays, the user general information, the time schedules, etc. It
comes with the controller ( free ).
46 The Installer’s choice
WIRELESS DEVICES
Plug-in modems for ERMU
Access Point WIFI according IEEE 802.11 b/g/n
2,4GHz +21dBm Max. Client wifi I/F LAN 100Mbit
PSTN type modem for fixed telephone
network, V32bis V90, for switched telephone
line communication.
Part-name Part-Number Description Modem GSM for Machine-to-machine
MD-GSM F1014000008 MODEM GSM WAVECOM Q24CL002_7KA507 FOR ERMU (M2M) data communication - 9600 baud.
MD-PTN F1014000009 MODEM PSTN SMD2457L-3V3 FOR ERMU Equipped with inferface card for ERMU
MD-WIFI nd WIFI ACCESS POINT - I/F LAN FOR ERMU Multiuser receiver compatibility.
Service bag Transmitter Master necessary for
the management of the multiuser
Service bag for multiuser receiver K8, K8P, K16P. receivers K8, K8P, K16P
LIST OF CONTENTS 47
N° 1 Backup memory
N° 1 RX - RX special cable with RJ45
N° 1 RX - TX special cable with probe
N° 1 RS232 cable for RX - PC connection.
N° 1 SW PCCOM ( only KP8 , KP16 )
N° 1 I/F RS232/USB
N° 1 CD driver USB
Dimensions : 325 x 260 x 75 mm
Part-name Part-Number Description
SEL2641-KITP8 F0204000037 SERVICE BAG KIT FOR MULTIUSER RECEIVER ERONE K8
SEL2641-KITP16 F0204000038 SERVICE BAG KIT FOR MULTIUSER RECEIVER ERONE K16
Memories and Master Transmitter
Accessories for Multiuser receivers
SEL2641-MEMB : 500 Users SEL2641-MXPL: 500 Users
Backup memory for Receiver XPL
SEL2641-MEMB16 : 1600 Users
Backup memory for Multiuser Receiver
SEL2641R433-K8 - K8P - K16P
Part-name Part-Number Description
SEL2641-MEMB F0204000033 BACKUP MEMORY 800 USERS
SEL2641-MEMB16 F0204000035 BACKUP MEMORY 1600 USERS
SEL2641-MXPL F0204000043 BACKUP MEMORY FOR RECEIVER XPL
S2TR2641E2M F1002000027 TX MASTER FOR MULTIUSERS RECEIVER K5/K8/K8P/K16P
www.erone.com
Hands-free
active tags
AACCCTEIVSSEOTARIGESS
Digitag-LR
The DigiTag-LR Long range active card is a battery supplied, active radio device, operating at 433,92 MHz in FM-FSK modulation. Available types with
and without motion sensor
DTXT5434 DTRR1434 DTRR1434R
Part-name Part-Number Description
DTRR1434 F0103000087 RECEIVER DIGITAG-LR WIEGAND OUTPUT
DTRR1434R F0103000104 RECEIVER DIGITAG-LR STAND ALONE ( RELAY OUTPUT)
DTXT5434 F0103000106 ACTIVE TAG LONG RANGE
DTXT5434M F0103000105 ACTIVE TAG LONG RANGE w/MOTION SENSOR
DTXT5434MI F0103000113 ACTIVE TAG LONG RANGE w/PASSIVE TAG MIFARE
DTXT5434P F0103000112 ACTIVE TAG LONG RANGE w/PASSIVE TAG MARIN
DTXT5434MP F0103000110 ACTIVE TAG LONG RANGE w/MOTION SENSOR w/PASSIVE TAG MARIN
DTXT5434MMI F0103000111 ACTIVE TAG LONG RANGE w/MOTION SENSOR w/PASSIVE TAG MIFARE
TECHNICAL SPECIFICATIONS DTXT5434 DTXT5434M DTRR1434R DTRR1434
Frequency
Encoding 433,92 MHz
Modulation
Erp Fixed code
Range in open space
Transmission period FSK
Transmission duration
Battery 5 uW 10 uW - -
Battery life
Current consumption 1 - 5 m ( adjustable )
Output
Power supply 2,3 sec. 1,05 sec - -
Relays
Memory 7 mSec 6,7 mSec
Power supply
Enclosure CR2032 Lithium --
Dimensions (mm)
12 months --
4 mA
- - Wiegand 26 Relay
3V 12 - 24 Vac/dc
2 x 24 VA 1 x 24 VA
800 TX
12 - 24 Vac/dc
IP30 ( Indoor )
180 x 140 x 68 mm
www.erone.com 49
ACTIVE TAGS
CDVI Pass
CDVI Pass is a radio system for the access control of persons and vehicles. It is mainly composed by 3 devices : one active tag, one trigger antenna
and one receiver. It finds application in domestic, pubblic, residential and industrial environment, both for personal and vehicular use. The users or the
vehicles carrying the active card and standing in the detection zone of the trigger aerial, are identified waking-up the tag, which is normally in stand-by
and deconding the tag information. The serial number of the tag, that identifies uniquely the user, is then transmitted via radio to the receiver which, at
its turn, sends the information to any access control system, through a RS-485 or wiegand line.
Antenna-trigger AN02CP Active tag
Antenna-trigger AN01CP Receiver
Part-name Part-Number Description
KCPASS F0103000118 KIT CDVI PASS ( ANTENNA AN01CP + RECEIVER + 2 ACTIVE TAGS)
AN01CP F0103000119 TRIGGER ANTENNA CDVI PASS WITH FIXING BRACKET
AN02CP F0103000123 TRIGGER ANTENNA CDVI PASS LOW RANGE
ATCP F0103000120 ACTIVE TAG CDVI PASS
RXCP F0103000121 RECEIVER CDVI PASS
MBCP F0103000122 BACKUP MEMORY CDVI PASS
SEA433 F0103000029 TUNED ANTENNA 433 MHz
Operating details
CDVI Pass is based on an active tag equipped with a radio double technology, passive (at 125 KHz ) and active (at 433,92 MHz). The active tag stays
always in stand-by: when it arrives inside the aerial detection zone, it wakes-up and starts transmitting at 433,93 MHz. In this way its battery consumption
is highly limited. If, whilst remaining in the detection zone, it does not move, the internal motion sensor sets it in stand-by. The wake-up signal at 125
KHz carries even a byte with the serial number of the antenna ( 1 - 99 ). Once awake, and as long as it stands in the field at 125 Khz, the tag transmits an
encrypted signal with its serial number and the serial number of the antenna. The receiver decrypts the signal and extracts this information. If the output
set is wiegand or RS-485, the information is sent on the wiegand bus or RS-485 line otherwise if the output is “relay” the receiver activates the relay ( 1
or 2 ) if the S/N of the tag has been authorized. In this case the receiver can drive directly a automatic closure system ( gate, road barrier, door, etc..).
NOTE : The communication between the active tag and the receiver can be set as UNIDIRECTIONAL or BIDIRECTIONAL.
- In UNIDIRECTIONAL mode as long as the tag stands within the detection zone at 125 KHz it is woken periodically by the trigger aerial and transmits its
RF signal at 433 MHz.
- In BIDIRECTIONAL mode after one transmission at 433 MHz, the active tag receives an acknoledgement signal from the receiver and doesn’t transmit
anymore, even if standing within the field, saving the battery.
If it is moved outside the active zone and remains there more then 6 sec. as soon as it comes back in the field, it transmits its RF signal at 433 Mhz again.
If it is moved onto another field where is operating a trigger antenna with a different ID, it will restart immediately the signal at 433 MHz.
System architecture
125 KHz
433 MHz
10 m 100 - 150 m Access control Panel
In open space Wiegand / RS-485
3
Relay output
Automation
50 The Installer’s choice