Cu Hammer Series G Circuit Breakers - Sensors, Incorporated

Eaton Cutler-Hammer® Series G Circuit Breakers

EG JG LG NG RG

Ampere Range 16 –160 A ᕡ 15 – 250 A 100 – 630 A ᕡ 400 – 1250 A ᕡ 1600 A ᕡ 800 – 2500 A
EGB EGE EGS JGE JGS JGH JGC LGE LGS LGH RGH
Breaker Type EGH LGC NGS NGH NGC NGS RGC
65 85 100 200 65 85 100 125
Breaker Capacity (kA rms) ac 50 – 60 Hz 25 35 65 100 35 50 65 65 200
18 25 35 50 18 25 35 50 100
NEMA® 240 Vac 25 25 35 85 85 100 100 65 85 100 200 65 85 100 200 65 100 200 – 135 65
65 85 100 150 65 85 100 100 200
480 Vac – 18 25 – 35 – 65 25 40 70 100 35 50 70 100 50 65 100 – 70 100
25 40 70 75 35 50 70 50 100
600 Vac – – 18 ᕢ 22 ᕢ 22 ᕢ 30 ᕢ 25 ᕢ 12 12 14 20 12 20 25 50 25 35 50 – 25 50
220 – 240 Vac 6 6 7 10 6 10 13 13 35
IEC 60947-2 Icu 25 25 35 85 85 100 100 10 35 42 42 22 22 42 200 85 100 200 85 – 18
Ics 10 35 42 42 22 22 42 – –
Icu 25 25 35 43 43 50 50 150 85 100 100 85 –
Ics 2, 3, 4 3,4 3, 4
380 – 415 Vac Icu – 18 25 – 40 – 70 100 50 70 100 50 –
660 – 690 Vac Ics Adjustable Adjustable –
Icu – 18 25 – 30 – 35 – – 75 50 50 50 50 –
Ics
–– 3 –4 – 6 35 20 25 35 20

–– 3 –3 – 3 18 10 13 18 10

250 Vdc 10 10 10 35 35 42 42 42 – – ––
(2 poles in series.)
10 10 10 35 35 42 42 42 – – ––

Number of Poles 1 2, 3, 4 2, 3, 4 1 2, 3, 4 1 2, 3, 4 2, 3, 4 3

Thermal Magnetic Fixed Thermal –
–
Adjustable Thermal –
–
Magnetic Fixed

Electronic rms LI –
LS
(Not suitable for dc application. LSI –
4-pole ground fault not available.)

–

LIG – –– –

LSG –

LSIG –

Interchangeable Trip – – –
Dimensions — Inches (mm) W W
H W D H W D H W D H – D H – D
1-Pole 1.00 (25.4) – – – – – – – – – – – –
5.50 (139.7) 2.00 (50.8) 2.99 (76.0) – – – – – – – 8.25 (210.0) – – 15.50 (394.0) –
2-Pole 7.00 (177.8) 4.13 (105.0) 3.57 (87.4) 10.13 (258.0) 5.48 (140.0) 4.09 (104.0) 16.00 (406.0) 11.13 (280.0) 5.50 (140.0) 16.00 (406.0) 20.00 (508.0) 9.75 (229.0)
1-Pole 4-Pole 7.22 (183.0)
3-Pole 1.1 (0.5) 3.00 (76.2) 3.9 (1.8) 2-Pole 5.34 (135.6) 4-Pole 3-Pole 4-Pole 3-Pole A 4-Pole 3-Pole A 4-Pole
11.4 (5.2) 3-Pole 15.3 (7.0) 16.0 (7.3) A 20.0 (9.1) 46.8 (21.3) 62.0 (28.3) 103.0 (47.0) 118.4 (54.0)
4-Pole 4.00 (101.6) 11.4 (5.2)
Weight (Approximate) — lbs. (kgs.) A
2-Pole 3-Pole

2.0 (0.9) 3.1 (1.4)

Utilization Category A

Molded Case Switches

3-Pole / 4-Pole 3-Pole 3-Pole / 4-Pole 3-Pole / 4-Pole 3-Pole / 4-Pole 3-Pole / 4-Pole

Motor Circuit Protectors

EG Frame — 600Y/347 Vac Maximum, 250 Vdc Maximum JG Frame — 600 Vac Maximum, 250 Vdc Maximum LG Frame — 600 Vac Maximum, 250 Vdc Maximum NG Frame — 600 Vac Maximum RG Frame — 600 Vac Maximum

Continuous Amperes Magnetic Range (Amperes) Continuous Amperes Magnetic Range (Amperes) Continuous Amperes Magnetic Range (Amperes) Continuous Amperes Magnetic Range (Amperes) Continuous Amperes Magnetic Range (Amperes)

3 – 100 9 – 1500 250 500 – 2500 600 1125 – 6000 800 – 1200 1600 – 9600 ––

Terminals — Note: EG, JG, LG MCCBs come with Cu/Al standard terminals. Steel Aluminum Aluminum Stainless Steel Aluminum Copper Aluminum Copper Aluminum Copper Aluminum Copper Aluminum Copper Aluminum Rear Connectors Rear Connectors
Cu/Al Cu/Al Cu/Al Copper Cu/Al Copper
Terminal Body Material 2.5 – 95 35 – 120 25 –185 Cu/Al Cu/Al Copper Cu/Al Copper 95 – 185 Cu/Al Copper Cu/Al – –
#14 – 3/0 2.5 – 50 16 –70 #3 – 250 #4 – 350 120 – 300 3/0 – 400
Wire Type #14 – 1/0 #6 –3/0 1 1 25 –185 240 – 380 35 –240 240 – 380 35 –240 35 – 240 4/0 – 500 300 – 500 50 – 300 35 – 300 – –
Metric Wire Range mm2 1 – T250FJ 4
AWG Wire Range – 11 #4 – 350 500 – 750 2 – 500 500 – 750 2 – 500 2 –500 3 T1200NB3M 500 –1000 1 – 600 2 – 600 1600 – 2000A 2500A
AWG Wire Number of Conductors 3T125EF –– 3TA160EFK 3TA160EFK TA1200NB3M
Catalog Number – 3TA125EF 3TA150EF – – 1 11 2 – 446 – –
Catalog Number (Package of 3 Terminals) –– – –
Catalog Number (Package of 4 Terminals) TA250FJ TC250FJ – TA350LK – T350LK –– – TA1600RDM T1600RDM TA2000RDM B2016RDM B2500RDM

–– 3TA631LK – 3T631LK – 3TA632LK 3T632LK – –– – –
– –– – –
–– 4TA631LK 4TA632LK 4T631LK 4T632LK ––

ᕡ Maximum UL and CSA ratings: EG – 125 amperes, LG – 600 amperes, NG – 1200 amperes. Cutler-Hammer is a federally registered trademark of Eaton Corporation.
ᕢ 600Y/347

Field Fit Internal Accessories Pole Location EG Frame JG Frame LG Frame NG Frame RG Frame Accessories
Shunt Trip — Standard SNT120CPK SNT120CPK SNT120CPK SNT5LP11K *
120 Vac – 12 Vdc Left SNT1200PK SNT1200PK SNT1200PK SNT5LP11K *
Undervoltage Release Mechanism SNT060CPK SNT060CPK SNT060CPK SNT5LP03K *
240 Vac Left SNT060CPK SNT060CPK SNT060CPK SNT5LP23K *
SNT480APK SNT480APK SNT480APK –
24 Vdc – 60 Vdc Left –
– – – SNT5LP14K SNT6P14K
48 Vdc Left
– – –
380 – 600 Vac Left UVR120APK UVR120APK UVR120APK Field Fit Internal Accessories Pole Location EG Frame JG Frame LG Frame NG Frame RG Frame
UVR240APK UVR240APK UVR240APK Alarm Lockout Right ALMBEPK ALMBEPK ALMBEPK
220 – 250 Vdc or – UVR024CPK UVR024CPK UVR024CPK Auxiliary Switch Make/Break Right ALM2M2BEPK ALM2M2BEPK ALM2M2BEPK A1L5RPK* A1L6RPK
380 – 440 Vac UVR048DPK UVR048DPK UVR048DPK 2 Make / 2 Break Right AUX1A1BPK AUX1A1BPK AUX1A1BPK
UVR012CPK UVR012CPK UVR012CPK Auxiliary Switch / Alarm Lockout 1A, 1B Right AUX2A2BPK AUX2A2BPK AUX2A2BPK A2L5RPK* A2L6RPK
UVR048APK UVR048APK UVR048APK 2A, 2B Right
480 – 600 Vac – UVR125DPK UVR125DPK UVR125DPK SNT5LP18K SNT6P18K Auxiliary Switch Auxiliary Switch 3A, 3B Right – – – A1X5RPK* –
UVR250DPK UVR250DPK UVR250DPK Plug-In Block 4A, 4B Right – – –
120 Vac Left UVR480APK UVR480APK UVR480APK UVH5LP08K * AUXALRMEPK AUXALRMEPK AUXALRMEPK A2X5RPK* A2X6RPK
UVR600APK UVR600APK UVR600APK
208 – 240 Vac Left UVH5LP11K * A3X5RPK* –

24 Vdc, Vac Left UVH5LP21K * – A4X6RPK

48 Vdc Left UVH5LP23K * AA115RPK* –

12 Vdc, Vac Left –– * Left pole mount available.

48 Vac Left ––

120 Vdc Left ––

220 – 250 Vdc Left ––

380 – 500 Vac Left –– Closed Coupled Handle Mechanism

525 – 600 Vac Left ––

* Right pole mount available.

Handle Mechanisms

Universal Direct Ordering Information — Close Coupled EG Frame JG Frame LG Frame NG Frame RG Frame
JHMCCBI LHMCCBI – –
Plug-in Blocks EG Frame JG Frame LG630 Frame NG Frame RG Frame White Handle Color with Interlock Catalog Number EHMCCBI JHMCCB LHMCCB – –
Poles JHMCCR LHMCCR – –
Catalog Number 34 3 4 3 4 – – White Handle Color without Interlock Catalog Number EHMCCB
Trip-on Drawout Interlock Kit
Poles PAD3E PAD4E PAD3J PAD4J PAD3L PAD4L – – Red Handle Color without Interlock Catalog Number EHMCCR
Catalog Number
EG Frame JG Frame LG Frame NG Frame RG Frame

343 4 3 4 – –

PIILEG PIILJG PIILLG – –

Rear Connecting Studs J250 Frame L630 Frame N Frame R Frame
Fit Type E125 Frame –

Field Fitted

Flex Shaft

Feet EG Frame JG Frame LG Frame NG Frame RG Frame
(Meters) JHMFS03I –
JHMFS04I
3 (.91) EHMFS03I JHMFS05I –– F6S04
JHMFS06I F6S05
4 (1.22) EHMFS04I JHMFS07I LHMFS041 F5S04CI F6S06
JHMFS08I
5 (1.52) EHMFS05I JHMFS09 – F5S05CI –
JHMFS10 –
6 (1.83) EHMFS06I – F5S06CI –
–
Flex Shaft 7 (2.13) EHMFS07I LHMFS071 –

8 (2.44) EHMFS08I ––

9 (2.74) EHMFS09 ––

Ground Fault / 10 (3.05) EHMFS10 LHMFS101 F5S10CI
Earth Leakage Module

Lock-offs and Interlocks Fit Type EG Frame J250 Frame L630 Frame N Frame R Frame
Non-Padlockable Handle Block – – LKD4 –
Padlockable Handle Block Field Fitted EFHB – –
Padlockable Handle Lock Hasp FJPHBOFF LBHPOFF PLK5
Key Interlock Kit (Provision Only) Field Fitted EFPHBOFF FJPHLOFF LPHL KYK4 HLK6 Ground Fault / Earth Leakage Modules
Slide Bar Interlock – Requires 2 Breakers KYKL SBK5 KYK6
Walking Beam Interlock – Requires 2 Breakers Field Fitted EFPHLOFF KYKFJ – Padlockable Handle Block EG Frame (Side Mounted, JG Frame (Bottom Mounted, LG Frame (Bottom Mounted, NG Frame RG Frame
FJSBI SBKL3/SBKL4 – End Cap Kit 230 – 415 Vac, 50/60 Hz) 230 – 415 Vac, 50/60 Hz) 230 – 415 Vac, 50/60 Hz)
Field Fitted – FJWBI WBLL3630/ –
WBLL4630
Field Fitted 68C6304G01 Amperes 125 160 250 400 630 – –

Factory Fitted – Poles 3 4 3 4 3 4 3 4 3 4 ––

Catalog Number ELESE3125W ELESE4125W ELJBE3160W ELJBE4160W ELJBE3250W ELJBE4250W ELLBE3400W ELLBE4400W ELLBE3630W ELLBE4630W – –

Test Kit E125 Frame J250 Frame L630 Frame N Frame R Frame

Electronic Portable Test Kit (Digitrip 310/310+) – – – STK2 STK2

Electrical Operator J250 Frame L630 Frame N Frame R Frame
Voltage E125 Frame EOPFJ240C EOPLG240C EOP5T07 EOP6T08
EOPFJ240C EOPLG240C EOP5T11 EOP6T11
120 Vac EOPEF240C
– –– –
240 Vac EOPEF240C EOPFJ24D EOPLG24D EOP5T21 EOP6T19K Electrical Operator
EOPFJ48D EOPLG48D EOP5T22 EOP6T21K
380 Vac – EOPFJ240C EOPLG240C EOP5T26
–
24 Vdc EOPEF24D Universal Rotary Handle Mechanism

48 Vdc EOPEF48D

125 Vdc EOPEF240C

Terminal Accessories EG JG LG NG RG
Multiwire Connectors
Maximum Amperes 125 250 – – – Handle Mechanisms / Universal Rotary
Control Wire Terminal Kit Wires per Terminal
End Caps Wire Size Range AWG Cu 36 36 – –– Universal Rotary Ordering Information EG Frame JG Frame LG Frame NG Frame RG Frame
Terminal Shields Kit Catalog Number* 12.00 (304.8) 235 (9)
Interphase Barriers 14 – 2 14 – 6 14 – 2 14 – 6 – –– Shaft Length — Inches (mm) 6.00 (152.4) 12.00 (304.8) 24.00 (609.6) 6.00 (152.4) 12.00 (304.8) 24.00 (609.6) 6.00 (152.4) Black or Red 24.00 (609.6) 6.00 (152.4) 12.00 (304.8) 16.00 (406.4) 24.00 (609.6) Black
KLHMVD12(BorR) Black or Red HMVD6B
3TA125E3K 3TA125E6K 3TA250J3 3TA250J6 – –– Handle Color Black or Red Black or Red Black or Red Black or Red Black or Red Black or Red Black or Red KLHMVD24(BorR) Black Black Black Black
– –
EFCWTR (Package of 12) FJCWTK (Package of 14) – –– Complete Catalog Number EHMVD06(BorR) EHMVD12(BorR) EHMVD24(BorR) FJHMVD06(BorR) FJHMVD12(BorR) FJHMVD24(BorR) KLHMVD06(BorR) – – HMVD5B – – – –
–
3-Pole EF3RTWK, 4-Pole EF4RTWK 3-Pole FJ3RTWK, 4-Pole FJ4RTWK 3-Pole L3RTWK, 4-Pole L4RTWK – – Cutler-Hammer Rotary

3-Pole EFTS3K, 4-Pole EFTS4K 3-Pole FJTS3K, 4-Pole FJTS4K 3-Pole LTS3K, 4-Pole LTS4K –– Complete Catalog Number IEC IP65 – – – – – – – WHM5R06 WHM5R12 WHM5R16 WHM5R24
WHM5R06X WHM5R12X WHM5R16X WHM5R24X
EIPBK (Package of 2) 3-Pole FJIABK, 4-Pole FJIPBK4 – IPB5 – IEC IP66 – – – – – – –

* End cap kit required.

Standards

Eaton Cutler-Hammer Molded Case Australian Standard AS 2184 British Standards Institution International Electrotechnical National Electrical Manufacturers South African Bureau of Standards, Swiss Electrotechnical Association Union Technique de l’Electricite Verband Deutscher Elektrotechnike
Circuit Breakers are designed to and AS 3947-2 Molded Case Standard BS 4752: Part 1, Commission Recommendations Association Standards Publication Standard SABS 156, Standard Standard SEV 947.2, Safety Standard NF C 63-120, Low Voltage (Association of German Electrical
conform with the following Circuit Breakers. Switchgear and Control Gear IEC 60947-2 Circuit Breakers. No. AB1-1975 Molded Case Specification for Molded Case Regulations for Circuit Breakers. Switchgear and Control Gear Engineers) Standard VDE 0660,
international standards: Part 1, Circuit Breakers. CE marked. Circuit Breakers. Circuit Breakers. Circuit Breaker Requirements. Low Voltage Switchgear and
Control Gear, Circuit Breakers.

Eaton Electrical Inc. © 2004 Eaton Corporation
1000 Cherrington Parkway All Rights Reserved
Moon Township, PA 15108 Printed in USA
United States Pub. No. PT01200001E / Z2575
tel: 1-800-525-2000 September 2004
www.EatonElectrical.com

Series G High performance handle mechanism

High performance operating handles
for Series G circuit breakers

Eaton’s new Series GT rotary circuit breaker handle
mechanism is built for high performance. Its clean,
functional design makes installation and operation easier
than ever. Underneath the aesthetically pleasing exterior
of the door-mounted handle is a robust metal core
constructed for reliable operation in harsh environments.
To fit a variety of applications and enclosure configuration
types, this handle mechanism is offered in three
shaft lengths, two color schemes, and Type 1/12/3R or
Type 4/4X ratings.

Used in control panels for Ease of installation
industrial machinery and operation
The handle mechanism‘s
• Pumps and compressors design enables fast and efficient
• Conveyors and material mounting. To further ease
installation and positioning of the
handling equipment shaft, the handles are designed
• Mixers and grinders with guided shaft alignment.
• Metalworking machines These handle mechanisms
• Extruders, injection molding can accept padlocks or multi-
hasp locks for added flexibility.
and other plastics machinery The door is interlocked when
• Packaging machinery padlocked and cannot be
bypassed—a key feature to
Rugged, compact design enhance personnel safety.
Suitable for use in even the With a shallow profile, the
most severe environments, mechanism has an overall
the external handle’s key handle depth of only 1.77 inches
functional components are all (45 mm) 1, so the handle can
metallic, ensuring reliability. easily be used in applications
The metal-on-metal defeater where an internal/double door
between the handle and shaft is required.
prevents contaminant build-up
that could impede operation, Emergency applications
while UV and chemical agent Red and yellow handles
resistant materials protect the are available for use on
handle from heat and fading local safety enclosure to
in direct sunlight and from designate emergency
contaminants that may be intro- disconnecting means.
duced in harsh environments.
In addition to its robust design 1 Applies to Series G EG, JG and LG
features, the handle mechanism handle types.
has stand-off support that
allows for easy operation with
a gloved hand.

Internal handle can be operated Design allows for fast and Red/Yellow color option is available Lock-out feature prevents opening
independent of door position and efficient mounting. for emergency disconnect. door when handle is padlocked.
locked-out to meet NFPA 79 and
UL 508A disconnect requirements.

Series G Frame Color Shaft Length mm Rating Type IP Catalog Number
E Black/Blue Inches NEMA
152.4 20/54/55 EGHMVD06B
Red/Yellow 6.00 304.8 1/12/3R 20/54/55 EGHMVD12B
12.00 609.6 1/12/3R 20/54/55 EGHMVD24B
Black/Blue 24.00 152.4 1/12/3R 20/54/55 EGHMVD06R
6.00 304.8 1/12/3R 20/54/55 EGHMVD12R
Red/Yellow 12.00 609.6 1/12/3R 20/54/55 EGHMVD24R
24.00 152.4 1/12/3R 66 EGHMVD06BX
J Black/Blue 6.00 304.8 4/4X 66 EGHMVD12BX
12.00 609.6 4/4X 66 EGHMVD24BX
Red/Yellow 24.00 152.4 4/4X 66 EGHMVD06RX
6.00 304.8 4/4X 66 EGHMVD12RX
Black/Blue 12.00 609.6 4/4X 66 EGHMVD24RX
24.00 152.4 4/4X 20/54/55 JGHMVD06B
Red/Yellow 6.00 304.8 1/12/3R 20/54/55 JGHMVD12B
12.00 609.6 1/12/3R 20/54/55 JGHMVD24B
L Black/Blue 24.00 152.4 1/12/3R 20/54/55 JGHMVD06R
6.00 304.8 1/12/3R 20/54/55 JGHMVD12R
Red/Yellow 12.00 609.6 1/12/3R 20/54/55 JGHMVD24R
24.00 152.4 1/12/3R 66 JGHMVD06BX
Black/Blue 6.00 304.8 4/4X 66 JGHMVD12BX
12.00 609.6 4/4X 66 JGHMVD24BX
Red/Yellow 24.00 152.4 4/4X 66 JGHMVD06RX
6.00 304.8 4/4X 66 JGHMVD12RX
N Black/Blue 12.00 609.6 4/4X 66 JGHMVD24RX
Red/Yellow 24.00 152.4 4/4X 20/54/55 LGHMVD06B
Black/Blue 6.00 304.8 1/12/3R 20/54/55 LGHMVD12B
Red/Yellow 12.00 609.6 1/12/3R 20/54/55 LGHMVD24B
24.00 152.4 1/12/3R 20/54/55 LGHMVD06R
6.00 304.8 1/12/3R 20/54/55 LGHMVD12R
12.00 609.6 1/12/3R 20/54/55 LGHMVD24R
24.00 152.4 1/12/3R 66 LGHMVD06BX
6.00 304.8 4/4X 66 LGHMVD12BX
12.00 609.6 4/4X 66 LGHMVD24BX
24.00 152.4 4/4X 66 LGHMVD06RX
6.00 304.8 4/4X 66 LGHMVD12RX
12.00 609.6 4/4X 66 LGHMVD24RX
24.00 203.2 4/4X 20/54/55 NGHMVD08B
8.00 203.2 1/12/3R 20/54/55 NGHMVD08R
8.00 203.2 1/12/3R 66 NGHMVD08BX
8.00 203.2 4/4X 66 NGHMVD08RX
8.00 4/4X

Note: Also available as separate handle, shaft and mechanism. Refer to Tab 1 of the OEM Product Guide, PG08302001E, for more information.

Eaton Corporation PowerChain Management is a registered
Electrical Sector trademark of Eaton Corporation.
1111 Superior Ave. All other trademarks are property of their
Cleveland, OH 44114 respective owners.
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2009 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. PA01222001E / Z8710
August 2009

Series G Handle Mechanisms

High Performance Rotary Handles 12.2 Series G Handle Mechanisms 12
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flex Shaft Flange-Mounted Handle Mechanisms. . . . . . . . . . . . . . . . . . . . . . . 2
High Performance Rotary Handle Mechanisms . . . . . . . . . . . . . . . . . . . . . . . .
Universal Rotary Through-the-Door Handle Mechanisms . . . . . . . . . . . . . . . . . . . 3 12
Direct (Close-Coupled) Handle Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . .
5

8 12
9 12

12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12

Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com 1

12.2 Series G Handle Mechanisms

15–2500 Amperes for UL, CSA and IEC Applications

12 Series G Family Contents
12
12 Product Overview Description Page
12
12 Handle Mechanisms Flex Shaft Flange-Mounted Handle Mechanisms . . . . . . . . 3
12 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
12 Handle mechanisms are used Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
12 to operate molded case Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
12 circuit breakers, molded case 5
12 switches and motor circuit High Performance Rotary Handle Mechanisms . . . . . . . . . . 5
12 protectors. They are available Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
12 in three basic configurations— 8
12 Flange Mounted, Through- Universal Rotary Through-the-Door Handle Mechanisms . . 9
12 the-Door and Direct (Close- Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12 Coupled)—providing safe,
12 dependable operation and Direct (Close-Coupled) Handle Mechanisms . . . . . . . . . . . .
12 ease of installation. Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12 Flange Mounted Handle mechanisms are used
12 ● Flex Shaftீ on enclosed circuit breakers,
12 control panels and motor
12 Through-the-Door control centers in many
12 ● High Performance Rotary different applications. Eaton
12 ● Universal Rotary has a handle mechanism for
12 virtually any need.
12 Direct (Close-Coupled)
12 ● Universal Direct
12
12
12

2 Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com

Series G Handle Mechanisms 12.2

15–2500 Amperes for UL, CSA and IEC Applications

Flex Shaft 12
12
Flange-Mounted Handle Mechanisms 12
12
Flange-mounted handle Flex Shaft comes preset from Flex Shaft is ULா listed under 12
File E64893 and meets CSAா 12
mechanisms mount on the the factory, requiring only requirements. 12
flange of an enclosure door. minor field adjustments on 12
Note 1: Type 4X handle 12
The Flex Shaft is an extra installation, which takes mechanisms are available. 12
Add Suffix X to the complete 12
heavy-duty mechanism that about 10 minutes—a Catalog Number. 12
includes a flexible shaft in significant time savings 12
Note 2: When selecting the 12
various lengths, 3 feet (0.9m) compared to installation of length of shaft, ensure minimum 12
through 10 feet (3m) for use other types of flange handle bending radius of 4 inches 12
with various size enclosures. mechanisms. The Flex Shaft (101.6 mm) is maintained to 12
operate properly. 12
The Flex Shaft handle will mechanism also takes up less 12
accept up to three padlock interior enclosure space than Note 3: The standard method 12
shackles, each with a competitive designs, and the of shipment includes the 12
maximum diameter of handle fits standard flange mechanism preset at the factory; 12
3/8 inch (9.5 mm). It can be cutouts. Flex Shaft handle however, minor field adjustments 12
used with Type12 fabricated can be remotely mounted may be required. 12
enclosures. An optional from breaker, where an 12
handle is available for Flex operator can use it by 12
Shaft that is suitable for use “funneling” the cable 12
with Type 4 environments. through conduit. 12
12
Product Selection 12

Flex Shaft Flex Shaft Flange-Mounted Handle Mechanisms ᕃᕄ

Flexible Shaft Length in Feet (m)

2 (0.6) 3 (0.9) 4 (1.2) 5 (1.3) 6 (1.8)
Catalog Catalog
Breaker Catalog Price Catalog Price Catalog Price Number Price Number Price
Frame Number U.S. $ ᕅ Number U.S. $ ᕅ Number U.S. $ ᕅ U.S. $ ᕅ U.S. $ ᕅ
EHMFS05 EHMFS06
EG EHMFS02 613.00 EHMFS03 618.00 EHMFS04 630.00 JHMFS05 642.00 JHMFS06 659.00
850.00 — 860.00 — 825.00
JG N/A — JHMFS03 833.00 JHMFS04 840.00 F5S05CI F5S06CI
1006.00 F6S05 — F6S06 —
LG N/A —— — LHMFS04 1130.00 1018.00 1029.00
1147.00 1164.00
NG N/A — N/A — F5S04CI
Price
RG N/A — N/A — F6S04 U.S. $ ᕅ

Flexible Shaft Length in Feet (m) 703.00
911.00
7 (2.1) 8 (2.4) 9 (2.7) 10 (3.1) 904.00
Catalog Catalog 1057.00
Breaker Catalog Price Catalog Price Number Price Number
Frame Number U.S. $ ᕅ Number U.S. $ ᕅ U.S. $ ᕅ —
EHMFS09 EHMFS10
EG EHMFS07 669.00 EHMFS08 675.00 JHMFS09 692.00 JHMFS10
JG 850.00 — 906.00 LHMFS10
LG JHMFS07 899.00 JHMFS08 N/A F5S10CI
NG — N/A — N/A
RG LHMFS07 890.00 — — —
— —
N/A — N/A

N/A — N/A

Notes

ᕃ 3-pole only for EG-; three- and four-pole for JG- and LG-Frame.
ᕄ EG-, JG- and LG-Frame can be left- or right-hand mounted.
ᕅ Discount Symbol: CB-2.

Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com 3

12.2 Series G Handle Mechanisms

15–2500 Amperes for UL, CSA and IEC Applications

12 Accessories
12
12 Handle Auxiliary Switch—Early Break Design, Type 12 Safety Door Hardware for Flex Shaft
12 1A–1B Contact for Flex Shaft (E- through R-Frame) ᕃ
12
12 Breaker Catalog Price Catalog Price
12 Frame Number U.S. $ ᕆ Number ᕄ U.S. $ ᕆ
12
12 EG AUX1EBFSEG 295.00 C361KJ4 137.00
12
12 JG AUX1EBFSJG 295.00 C361KJ6 145.00
12
12 LG AUX1EBFSLG 295.00 C361KR 29.50
12
12 Auxiliary contact changes state prior to parting of breaker
12 contacts to allow for shutdown of equipment. Contacts
12 mounted on breaker mechanism customer supplied wiring.
12
12 UL Type—IP Crossover
12
12 UL Type IP Type
12
12 1 IP20
12
12 3R IP55
12
12 12 IP54
12
12 4/4X IP66
12
Dimensions

Type 12 Safety Door Hardware for Flex Shaft
(E- through R-Frame) ᕃ

Catalog Handle Length
Number ᕄ in Inches (mm)

C361KJ4 4.00 (101.6)

C361KJ6 6.00 (152.4)

C361KR Roller latch ᕅ

Notes

ᕃ Customer: Consult with box manufacturer for correct door hardware and any adapters
required for assembly.

ᕄ The 1/4-inch x 1/2-inch (6.35 x 12.7 mm) standard mill rectangular locking bar is not supplied
with these kits.

ᕅ Third roller latch for use with 4.00- or 6.00-inch (101.6 or 152.4 mm) handle when three-point
latching is required.

ᕆ Discount Symbol: CB-2.

4 Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com

Series G Handle Mechanisms 12.2

15–2500 Amperes for UL, CSA and IEC Applications

High Performance Rotary Handle Mechanisms 12
for Series Gா Molded Case Circuit Breakers 12
12
The high performance rotary fading in direct sunlight, as The high performance ● Type 1, 12, 3R, 4 and 12
handle mechanism uses a well as chemicals that may external handle can accept 4X ratings 12
simple, yet robust design be introduced in harsh padlocks or multi-hasp locks. 12
to make installation and environments. The door is interlocked when ● Black/Blue or Red/Yellow 12
operation easy. The external padlocked and cannot be external handle colors 12
handle’s key functional In addition to its robust bypassed. The mechanisms 12
components are all metallic, design features, the handle for EG, JG and LG breakers ● Three shaft lengths: 6, 12 12
ensuring reliability. The metal- mechanism has stand-off have an internal handle that and 24 inches 12
on-metal defeater between support that allows for easy can be operated independent 12
the handle and shaft prevents operation with a gloved hand. of door position, and locked- ● Conveniently packaged as 12
contaminant buildup that With a shallow profile, the out to meet NFPAா 79 and kit containing handle, shaft 12
could impede operation, handle can easily be used in UL 508A disconnect and mechanism 12
while UV and chemical agent applications where an internal requirements. 12
resistant materials protect or double door is required. ● Replacement parts are 12
the handle from heat and available separately 12
12
Product Selection 12
12
Handle Mechanisms for Series G Frames 12
12
External Handle in Complete Kits EG-Frame ᕃ JG-Frame LG-Frame NG-Frame 12
the Vertical Position Catalog Catalog Catalog 12
Rating Type Number Number Number Catalog 12
External Handle Number 12
with Padlocks Color UL IP EGHMVD06B Price JGHMVD06B Price LGHMVD06B Price Price 12
Black/Blue 1/12/3R 20/54/55 EGHMVD12B U.S. $ ᕄ JGHMVD12B U.S. $ ᕄ LGHMVD12B U.S. $ ᕄ U.S. $ ᕄ 12
Internal Handle EGHMVD24B JGHMVD24B LGHMVD24B 12
Mechanism EGHMVD06R 225.00 JGHMVD06R 225.00 LGHMVD06R 255.00 NGHMVD08B 395.00
EGHMVD12R 225.00 JGHMVD12R 225.00 LGHMVD12R 255.00
EGHMVD24R 295.00 JGHMVD24R 295.00 LGHMVD24R 325.00 ——
EGHMVD06BX 225.00 JGHMVD06BX 225.00 LGHMVD06BX 225.00
EGHMVD12BX 225.00 JGHMVD12BX 225.00 LGHMVD12BX 255.00 ——
EGHMVD24BX 295.00 JGHMVD24BX 295.00 LGHMVD24BX 325.00
Red/Yellow 1/12/3R 20/54/55 EGHMVD06RX 285.00 JGHMVD06RX 285.00 LGHMVD06RX 295.00 NGHMVD08R 395.00
EGHMVD12RX 285.00 JGHMVD12RX 285.00 LGHMVD12RX 295.00
EGHMVD24RX 350.00 JGHMVD24RX 350.00 LGHMVD24RX 365.00 ——
285.00 285.00 295.00
285.00 285.00 295.00 ——
350.00 350.00 365.00
Black/Blue 4/4X 66 NGHMVD08BX 440.00

——

——

Red/Yellow 4/4X 66 NGHMVD08RX 440.00

——

——

Notes

ᕃ Compatible with three-pole and four-pole EG breakers only.
ᕄ Discount Symbol: CB-2.

Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com 5

12.2 Series G Handle Mechanisms

15–2500 Amperes for UL, CSA and IEC Applications

12 EG-Frame Handle Mechanism Components ᕃᕄ
12
12 Color Rating Type Shaft Length External Handle Price Shaft Price Mechanism Price
12 UL IP Inches (mm) Catalog Number U.S. $ ᕆ Catalog Number U.S. $ ᕆ Catalog Number U.S. $ ᕆ
12 66A6010H01
12 Black/Blue 1/12/3R 20/54/55 6.00 (152.4) 68C6048G01 125.00 66A6010H02 25.00 69D6002G17 97.00
12 125.00 66A6010G97 ᕅ 48.25 69D6002G17 97.00
12 12.00 (304.8) 68C6048G01 125.00 66A6010H01 95.00 69D6002G17 97.00
12 125.00 66A6010H02 25.00 69D6002G17 97.00
12 24.00 (609.6) 68C6048G01 125.00 66A6010G97 ᕅ 48.00 69D6002G17 97.00
12 125.00 66A6010H01 95.00 69D6002G17 97.00
12 Red/Yellow 1/12/3R 20/54/55 6.00 (152.4) 68C6048G02 185.00 66A6010H02 25.00 69D6002G17 97.00
12 185.00 66A6010G97 ᕅ 48.00 69D6002G17 97.00
12 12.00 (304.8) 68C6048G02 185.00 66A6010H01 95.00 69D6002G17 97.00
12 185.00 66A6010H02 25.00 69D6002G17 97.00
12 24.00 (609.6) 68C6048G02 185.00 66A6010G97 ᕅ 48.25 69D6002G17 97.00
12 185.00 95.00 69D6002G17 97.00
12 Black/Blue 4/4X 66 6.00 (152.4) 68C6048G03 Shaft
12 Price Catalog Number Price
12 12.00 (304.8) 68C6048G03 U.S. $ ᕆ 66A6010H01 U.S. $ ᕆ
12 66A6010H02
12 24.00 (609.6) 68C6048G03 125.00 66A6010G98 ᕅ 25.00
12 125.00 66A6010H01 48.00
12 Red/Yellow 4/4X 66 6.00 (152.4) 68C6048G04 125.00 66A6010H02 95.00
12 125.00 66A6010G98 ᕅ 25.00
12 12.00 (304.8) 68C6048G04 125.00 66A6010H01 48.00
12 125.00 66A6010H02 95.00
12 24.00 (609.6) 68C6048G04 185.00 66A6010G98 ᕅ 25.00
12 185.00 66A6010H01 48.25
12 JG-Frame Handle Mechanism Components ᕄ 185.00 66A6010H02 95.00
185.00 66A6010G98 ᕅ 25.00
Color Rating Type Shaft Length External Handle 185.00 48.25 Mechanism Price
UL IP Inches (mm) Catalog Number 185.00 95.00 Catalog Number U.S. $ ᕆ

Black/Blue 1/12/3R 20/54/55 6.00 (152.4) 68C6048G01 69D6020G17 97.00
69D6020G17 97.00
12.00 (304.8) 68C6048G01 69D6020G17 97.00
69D6020G17 97.00
24.00 (609.6) 68C6048G01 69D6020G17 97.00
69D6020G17 97.00
Red/Yellow 1/12/3R 20/54/55 6.00 (152.4) 68C6048G02 69D6020G17 97.00
69D6020G17 97.00
12.00 (304.8) 68C6048G02 69D6020G17 97.00
69D6020G17 97.00
24.00 (609.6) 68C6048G02 69D6020G17 97.00
69D6020G17 97.00
Black/Blue 4/4X 66 6.00 (152.4) 68C6048G03

12.00 (304.8) 68C6048G03

24.00 (609.6) 68C6048G03

Red/Yellow 4/4X 66 6.00 (152.4) 68C6048G04

12.00 (304.8) 68C6048G04

24.00 (609.6) 68C6048G04

Note

ᕃ Compatible with three-pole and four-pole EG breakers only.
ᕄ For replacement purposes.
ᕅ 24.00 inches (609.6 mm) includes support bracket.
ᕆ Discount Symbol: CB-2.

6 Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com

Series G Handle Mechanisms 12.2

15–2500 Amperes for UL, CSA and IEC Applications

LG-Frame Handle Mechanism Components ᕃ 12
12
Color Rating Type Shaft Length External Handle Price Shaft Price Mechanism Price 12
UL IP Inches (mm) Catalog Number U.S. $ ᕅ Catalog Number U.S. $ ᕅ Catalog Number U.S. $ ᕅ 12
66A6010H01 69D6051G30 12
Black/Blue 1/12/3R 20/54/55 6.00 (152.4) 68C6048G01 125.00 66A6010H02 25.00 69D6051G30 117.00 12
125.00 66A6010G99 ᕄ 48.25 69D6051G30 117.00 12
12.00 (304.8) 68C6048G01 125.00 66A6010H01 95.00 69D6051G30 117.00 12
125.00 66A6010H02 25.00 69D6051G30 117.00 12
24.00 (609.6) 68C6048G01 125.00 66A6010G99 ᕄ 48.25 69D6051G30 117.00 12
125.00 66A6010H01 95.00 69D6051G30 117.00 12
Red/Yellow 1/12/3R 20/54/55 6.00 (152.4) 68C6048G02 185.00 66A6010H02 25.00 69D6051G30 117.00 12
185.00 66A6010G99 ᕄ 48.25 69D6051G30 117.00 12
12.00 (304.8) 68C6048G02 185.00 66A6010H01 95.00 69D6051G30 117.00 12
185.00 66A6010H02 25.00 69D6051G30 117.00 12
24.00 (609.6) 68C6048G02 185.00 66A6010G99 ᕄ 48.25 69D6051G30 117.00 12
185.00 95.00 117.00 12
Black/Blue 4/4X 66 6.00 (152.4) 68C6048G03 Shaft Mechanism 12
Price Catalog Number Price Catalog Number Price 12
12.00 (304.8) 68C6048G03 U.S. $ ᕅ 66A6013H01 U.S. $ ᕅ 69D9101G30 U.S. $ ᕅ 12
66A6013H01 69D9101G30 12
24.00 (609.6) 68C6048G03 150.00 66A6013H01 65.00 69D9101G30 236.00 12
150.00 66A6013H01 65.00 69D9101G30 236.00 12
Red/Yellow 4/4X 66 6.00 (152.4) 68C6048G04 165.00 65.00 236.00 12
165.00 65.00 236.00 12
12.00 (304.8) 68C6048G04 12
12
24.00 (609.6) 68C6048G04 12
12
NG-Frame Handle Mechanism Components ᕃ 12

Color Rating Type Shaft Length External Handle
UL IP Inches (mm) Catalog Number

Black/Blue 1/12/3R 20/54/55 8.00 (203.2) 68C6048G05
Red/Yellow 1/12/3R 20/54/55 8.00 (203.2) 68C6048G06
Black/Blue 4/4X 66 8.00 (203.2) 68C6048G07
Red/Yellow 4/4X 66 8.00 (203.2) 68C6048G08

Notes

ᕃ For replacement purposes.
ᕄ 24.00 inches (609.6 mm) includes support bracket.
ᕅ Discount Symbol: CB-2.

Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com 7

12.2 Series G Handle Mechanisms

15–2500 Amperes for UL, CSA and IEC Applications

12 Universal Rotary
12
12 Through-the-Door Handle Mechanisms
12
12 Eaton’s Universal Rotary is and indicate ON/OFF/Tripped/ The Universal Rotary
12 suitable for use with Type 1 Reset positions. The mechanisms for EG-, JG- and
12 or 12 enclosure types. All Universal Rotary has the LG-Frame MCCBs can be
12 rotary handle mechanisms added feature of international operated by hand with the
12 include a handle “lock off” to markings for ON (I) and OFF door open or “locked off” to
12 prevent turning the breaker (O). The Universal Rotary is prevent operation with the
12 ON while in the OFF position, made of molded material. door open.
12
12 Product Selection
12
12 Universal Rotary Universal Rotary Through-the-Door Handle Mechanisms
12
12 Handle UL Shaft Length Complete Price
12 Color Rating in Inches (mm) Catalog Number ᕃ U.S. $ ᕅ
12
12 EG-Frame 108.00
12 113.00
12 Black 1, 12 6.00 (152.4) EHMVD06B 143.00
12 108.00
12 12.00 (304.8) EHMVD12B 113.00
12 143.00
12 24.00 (609.6) EHMVD24B
12 136.00
12 Red 1, 12 6.00 (152.4) EHMVD06R 141.00
12 176.00
12 12.00 (304.8) EHMVD12R 136.00
141.00
24.00 (609.6) EHMVD24R 176.00

JG-Frame 207.00
215.00
Black 1, 12 6.00 (152.4) FJHMVD06B 235.00
207.00
12.00 (304.8) FJHMVD12B 215.00
235.00
24.00 (609.6) FJHMVD24B
502.00
Red 1, 12 6.00 (152.4) FJHMVD06R 608.00

12.00 (304.8) FJHMVD12R 664.00

24.00 (609.6) FJHMVD24R

LG-Frame

Black 1, 12 6.00 (152.4) KLHMVD06B

12.00 (304.8) KLHMVD12B

24.00 (609.6) KLHMVD24B

Red 1, 12 6.00 (152.4) KLHMVD06R

12.00 (304.8) KLHMVD12R

24.00 (609.6) KLHMVD24R

NG-Frame

Black 1 6.00 (152.4) HMVD5B
6.00 (152.4) HMVD5BT ᕄ

RG-Frame

Black 1 9.00 (228.6) HMVD6B

Notes

ᕃ Complete catalog number includes handle, mechanism, shaft and mounting hardware.
ᕄ Same as HMVD5B, except uses T handle.
ᕅ Discount Symbol: CB-2.

8 Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com

Series G Handle Mechanisms 12.2

15–2500 Amperes for UL, CSA and IEC Applications

Direct (Close-Coupled) Handle Mechanisms 12
12
Direct (close-coupled) handle They are typically used for The Universal Direct handle The Universal Direct handle 12
mechanisms mount directly applications where high mechanism is available as mechanism is UL listed, 12
to the circuit breaker. volume, standardized standard with a door interlock IEC 60947-1/2 compliant and 12
They are used in shallow enclosures are being to prevent opening the meets CSA requirements. 12
enclosures where the fabricated. enclosure while the circuit 12
standard variable depth breaker is in the ON position. 12
Through-the-door type The Universal Direct handle It is also available without a 12
mechanism is not practical mechanisms are rated Type 1 door interlock. 12
or cannot be used. and Type 12. 12
12
Product Selection 12
12
Universal Direct Universal Direct Handle Mechanisms 12
(EG – LG) 12
Black Handle Color Red Handle Color 12
12
With Interlock Without Interlock With Interlock Without Interlock 12
12
Frame Catalog Price Catalog Price Catalog Price Catalog Price 12
Number U.S. $ ᕃ Number U.S. $ ᕃ Number U.S. $ ᕃ Number U.S. $ ᕃ 12
12
EG EHMCCBI 168.00 EHMCCB 161.00 EHMCCRI 168.00 EHMCCR 161.00 12
12
JG JHMCCBI 168.00 JHMCCB 161.00 JHMCCRI 168.00 JHMCCR 161.00 12
12
LG LHMCCBI 295.00 LHMCCB 188.00 LHMCCRI 295.00 LHMCCR 188.00 12
12
Note 12
ᕃ Discount Symbol: CB-2.

Series G Handle Mechanisms CA01222001E—September 2009 www.eaton.com 9