catalog

Bosch Brute Electric Hammer Gas Stake Driver TENT INSTALLATION HARDWARE

• A must for any tent rental company to increase productivity • Equipped With: 2-1/2” (63.5mm) I.D. Master Chuck
• Drive in tent stakes with ease saving labor time • Hardened Steel Hammer and Anvil
• Operates on 115 Volt AC/DC • One-piece Pinion Gear and Clutch Drum
• Hardened Spur Gear
(15 amp wall outlet or 2500 portable generator) • High-Grade Aluminum Connecting Rod and Piston
• 1400 BPM • Oilite Bearings in Connecting Rod Assembly
• Accepts 1-1/8” hex tool system • Aluminum Castings, Heat-Treated Virgin Material
• Approximate weight 70 pounds • One-Piece Crankshaft
•Overall height 29-¾” (0.7m) • High Quality Sealed Bearings
• Hardened Wrist Pin
ACB11304K • Quality Viton O-Rings
69 lbs. (31.2 kg) • Weather-tight Electric Connection
• Aircraft-Quality Stainless Steel Hardware
• Stainless Steel Handle Tubes
• Powder Coated Chuck Tube
• High-Density EPDM Cushioned Handle

Side Handles
ACGPD40
38 lbs. (17.2 kg)

Accommodate your stake driver with a heavy D-Handle
duty power extension cord recommended size ACGPD40D
38 lbs. (17.2 kg)
10/3, 125v see page 84

Stake Driver Bit Raize it! Plate

• Works with Bosch Brute, Atlas-Copco Hammers • Raize It! Plate is a small, compact sled to aid in raising pole tent

• Hardened Steel construction center and quarter poles

• Fits stake heads up to 2” (50.8mm) diameter • 4’’ Plate used with poles up to 4” (101.6mm) in diameter

• Shank dimensions: 1 1/8” (28.58mm) flat to flat and 6” (152.4mm) top to • 7’’ Plate used with poles from 4” (101.6mm) to 7.5” (190.5mm) in diameter

collar • Lifts up to 1000 lbs (453.6 kg)

ACBLSDB01 Description SKU Wt./ lbs.
8 lbs. (3.62 kg)
4” Raize it! Plate ACRAIZEIT4 20 (9.07 kg)
7” Raize it! Plate ACRAIZEIT6 20 (9.07 kg)

Tent Squaring Kit

Includes everything you need to square a tent properly
• 2-300’ (91.4m) Open Reel Measuring Tapes
• 1-can of White Marking Paint
• 5-12” (304.8mm) Heavy Duty Spikes
• 2-500’ (152.4m) Cotton Twine Balls

ACUTKIT
15 lbs. (6.80 kg)

Anti-sink Treated Wood Pole Plate

• 6” (152mm) x 6” (152mm) Treated Wood Anti-Sink Pole Plate
• Helps prevent damage to the yard
• Helps keep tents tight by preventing the pole from sinking into the

ground in wet conditions.
• Results in less damage to your tent and customers property
• Recommended on all applications

ACPPW66
.56 lbs. (0.25 kg)
Sold in units of 20

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 51

TENT INSTALLATION HARDWARE Steel Tent Stakes Steel Tent Pins

• Required for securing tents to the ground properly • Ideal for anchoring Pinnacle tents & sidewalls
• Manufactured from high carbon steel
• 1” diameter (5/8” for the 18” double head stake) • Unpainted and intentionally weathered to reduce slipping in
• Unpainted and intentionally weathered to reduce slipping
moist / loose soil applications
in moist applications
• 42” stakes are recommended when installing tents
30’ wide & larger

Size Description SKU Wt./ lbs.
18’’ x 3/4’’ ACTS2618WHSH 2.4 (1.1 kg)
Single head anchoring
24’’ x 3/4’’ pin w/ side hook ACTS2624WHSH 4 (1.81 kg)

24’’ x 5/8’’ Single head anchoring ACTS2524B 3 (1.36 kg)
pin w/ side hook

Anchoring Hook

Military Tent Pin

Size Description SKU Wt./ lbs. Size Description SKU Wt./ lbs.
12” x 5/8” ACTS2512STPPR 1.5 (0.68 kg)
*18” x 5/8” Double Head CCAP182 4 (1.81 kg) Tent Pin Painted Red
24” x 1” Single Head ACTS2411 6 (2.72 kg) 18” x 5/8” Mil-P-501, Type II ACTS2518STPPR 2 (0.90 kg)
24” x 1” Double Head ACTS2412 6 (2.72 kg)
36” x 1” Single Head ACTS3611 8 (3.62 kg) Tent Pin Painted Red
36” x 1” Double Head ACTS3612 8 (3.62 kg) Mil-P-501, Type III
*42” x 1” Single Head *ACTS4211 10 (4.53 kg)
*42” x 1” Double Head *ACTS4212 10 (4.53 kg) 22” Anchoring Pin

*Recommended for Pinnacle Tents pg. 36 • 22” (55.9cm) long
*Recommended for all tents 30’ wide and larger
• Used on Pinnacle Series Frame Tents to secure the Pinnacle Base Plates to the

ground

Stake Bag 33.5’’L x 10’’ x 8’’H CCAP22
1 lbs. (0.45 kg)
• Measures 33.5” (850.9mm)L x 10” (254mm)W x 8” (203.2mm)H
18" x 1/2" Anchoring Hook
• 2” (50.8mm) Easy-Carry handles with reinforcement sewing
• 18” (46cm) long
• Genuine-leather reinforced bottom

• Securing strap with hook-and-loop closure

• Canvas construction

B1011 CCAP22
3 lbs. (1.36 kg) 1 lbs. (0.45 kg)

Auger Stakes

• For applications requiring extra hold in sand & loose soil conditions
• Auger stakes ‘screw’ in and out of the soil

Size Description SKU Wt./ lbs.

Stake Bag- 14’’ x 31’’ 1/2” x 15” 3’’ (7.6cm) single helix coil AS500X15 1.7 (0.8 kg)
5/8” x 30” 4” (10.2cm) double helix coil AS625X30 5 (2.26 kg)
• Measures 14” (355.6mm) x 31” (787.4mm) 3/4” x 48” 4” (10.2cm) double helix coil AS750X48 8 (3.62 kg)
• Two sewn-in separators to help distribute weight
• Canvas construction with nylon binding CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT
• Genuine-leather reinforced bottom
• Hook-and-loop closure
• Slide in design

B1010
2lbs. (0.90 kg)

52 PRICING AVAILABLE AT WWW.GETTENT.COM

2” Box Ratchet w/ Foot Plate Stake Plate TENT INSTALLATION HARDWARE

Fits a standard 1 1/8” socket wrench • Designed to increase anchoring strength
• Used in soft soil conditions, inclement weather, & key holding points
• Standard color may vary • Recommended for use on large tent installations & long term rentals
• Galvanized steel
• 2 Holes per plate, Hole Diameter: 1 ¼” (3.2 cm)

Foot Plate with Foot Plate with Size Dimensions SKU Wt./ lbs.
Concrete Anchor 42” Double Headed Stake ACSTKPLT142 5 lbs. (2.26 kg)
14” 14”L x 3”W x 0.5”H
Concrete anchor sold separately 42” Double headed stake sold separately (35.6cm x 7.6cm x 1.3cm)

HW2BRWFP 15” 15”L x 3” W x 0.5”H ACSTKPLT15 6 lbs. (2.72 kg)
7 lbs. (3.17 kg)
(38.1cm x 7.62cm x 1.27cm)

Tent Stake Caps 24” Stake Plate

• Prevents potential injury from protruding tent stakes • Designed to increase anchoring strength
• Ideal for rope applications & double head stakes when using ratchets • Used in soft soil conditions, inclement weather, & key holding points
• Not applicable for use on single head stakes when using ratchet straps • Recommended for use on large tent installations & long term rentals
• Fits up to 2” (5.08cm) stake head diameter • Dimensions: 24”L x 3”W x 0.5”H (61cm x 7.6cm x 1.3cm)
• Made of ABS Plastic • Galvanized steel
• Available by case only: 100 per case • 3 Holes per plate, Hole Diameter: 1 ¼” (3.2cm)
• Available in white only

208 ACSTKPLT243
.02 lbs. (0.01 kg) each 9.6 lbs. (4.4 kg)

Galvanized Floor Flange Stake Bar

•Used in conjunction w/ the Galvanized Nipple • Designed to increase anchoring strength
•Component used in Celina’s PII Series Tents • Used in soft soil conditions, inclement weather, & key holding points
•3/4” (19.1mm) • Recommended for use on large tent installations & long term rentals
• Galvanized steel
HWFLANGE34GAL • Hole Diameter: 1 ¼” (3.2cm)
0.55 lbs. (0.2kg)

Galvanized Nipple Size Dimensions SKU Wt./ lbs.
ACSTKBAR243 11.7 lbs (5.3 kg)
•Used in conjunction w/ the Galvanized Floor Flange 24” 24”L x 2”W x 2”H
•Component used in Celina’s PII Series Tents (61cm x 5.1cm x 5.1cm)
•3/4” (19.1mm) x 4” (101.6mm)
48” 48”L x 2”W x 2”H ACSTKBAR485 23.4 lbs (10.6 kg)
HWNIPPLE34X4GAL (1.2m x 5.1cm x 5.1cm)
0.32 lbs. (0.1 kg)
PLUG-R® Asphalt Hole Plugs
Ratchet Cover
• Repairs stake holes in asphalt, pavement, & black top
• White vinyl wraps with a strip of hook and loop
• Secures around the ratchets used in tent anchoring • May need to fill hole with sand prior to placing plug

Small • Place plug in the hole, cover with a board, & pound with hammer or stake head
RCS01
.05 lbs. (0.22 kg) Description SKU Wt./ lbs.

Large 7/8” Asphalt Plug ACAHP087525 .11 (0.04 kg)
RCL01 (1” Holes) ACAHP0875320 35 (15.8 kg)
.05 lbs. (0.22 kg) 320 units per case

1 1/8” Asphalt Plug ACAHP1125176 22 (9.97 kg)
(1 1 /4” Holes) Sold by case only
(special order)
176 Units Per Case

Before Asphalt Plugs After Asphalt Plugs
PRICING AVAILABLE AT WWW.GETTENT.CO.UK
CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 53

TENT INSTALLATION HARDWARE Ratchet Assemblies Loop end & Ratchet strap sold separately

• 2” (50.8mm) seatbelt webbing with 2” (50.8 mm) ratchet buckle
• Weight tested up to 4000 lbs. (1,814.3 kg)
• Provides a safe, easy, and secure method to anchoring tents
• Ideal replacement for rope system saving time on installations
• Only requires 4” (101.6mm) of the stake above the ground to secure properly
• Standard on all Celina Tent styles
• Available in gray (white special order)

Loop Straps 6” (152.4mm) sewn loop standard

Size SKU Color Wt./ lbs.

8’ (2.44m) Loop AC08SPGR Gray 1 (0.45 kg)
8’ (2.44m) Loop AC08SPWH White 1 (0.45 kg)
10’ (3.05m) Loop AC10SPGR Gray 1 (0.45 kg)
15’ (4.57m) Loop AC15SPGR Gray 1 (0.45 kg)

Ratchet Straps 2” (50.8 mm) ratchet buckle with loop strap

Size SKU Color Wt./ lbs.

2” (50.8mm) x 5’ (1.52m) Single AC05SGR Gray 2 (0.90 kg) Loop Ratchet
2” (50.8mm) x 5’ (1.52m) Single AC05SWH White 2 (0.90 kg)
2” (50.8mm) x 10’ (3.0 m) Single AC10SGR Gray 2 (0.90 kg)
2” (50.8mm) x 10’ (3.05m) Single AC10SWH White 2 (0.90 kg)
2” (50.8mm) x 15’ (4.57m) Single AC15SGR Gray 2 (0.90 kg)
2” (50.8mm) x 15’ (4.57m) Single AC15SWH White 2 (0.90 kg)

1’’ x 84’’ Strap Assembly Top 1’’ x 42’’ Ratchet Assembly Bottom

• 1’’ (25.4 mm) Gray Webbing with 3’’ (76.2mm) Web Loop • 1’’ (25.4 mm) Ratchet and 1.5’’(38.1mm) O ring

• Overall Length: 84” (2,133.6mm) - Includes 3’’ (76.2mm) web loop • 1’’ (25.4 mm) Gray webbing with silver finished hardware

• Load Rating: 4,000 lbs. (1,814.37 kg) • Overall Length: 42” (1,066.8mm) - Includes 8’’ (203.2mm) web loop

• Component used on Celina’s Pinnacle Series Cross Cable & Master Series • Weight Rating: 4,000 lbs. (1,814.37 kg)

Tents • Component used on Celina’s Pinnacle Series Cross Cable & Master Series Tents

ACRA1007T ACRA1007B
1.5 lbs. (0.68 kg) 1.5 lbs. (0.68 kg)

1.5’’ x 131’’ Strap Assembly Top 1.5''x 47'' Ratchet Assembly Bottom

• 1.5’’ (38.1mm) White webbing with a 8’’ (203.2mm) web loop • 1.5’’ (38.1mm) Silver Finished Ratchet & 8’’ (203.2mm) Web Loop, white Webbing
• Overall length: 131” (3,327.4 mm) - Includes 8’’ (203.2mm) web loop • Overall Length: 47” (1,193.8 mm) - Includes 8’’ (203.2mm) web loop
• Weight rating: 4,000 lbs. (1,814.37 kg) • Weight Rating: 4,000 lbs. (1,814.37 kg)

ACRA1003T ACRA1003B
0.5 lbs. (0.22 kg) 1.5 lbs. (0.68 kg)

16’10’’ White 10,000# Strap 2’’ x 69’’ Ratchet Assembly Bottom

• 2” (50.8 mm) White polyester webbing with heavy duty twisted snap hook • 2’’ (50.8mm) Heavy Duty Ratchet and 1.5’’ (38.1mm) Double D Ring
• Overall Length: 16’10” (5.1m) • 2’’ (50.8mm) White Webbing and Silver Finished Hardware
• Load Rating: 10,000 lbs. (4,535.92 kg) • Overall Length: 69” (1,752mm) - Includes 2’’ (50.8mm) heavy duty ratchet and
• Used with Box Ratchet for Engineered Certified Tents 1.5” (38.1mm) double D-Ring
• Weight Rating: 4,000 lbs. (1,814.37 kg)
AC17SPWH10ENGTS
2 lbs. (0.90 kg) ACRA1004B
3 lbs. (1.36 kg)
2’’ x 125’’ Strap Assembly Top
2'' x 193'' Cam Buckle Assembly
• 2’’ (50.8mm) Twisted snap hook silver finished
• 2’’ (50.8mm) White webbing • 2” (50.8mm) wide x 193” (5.9m) long
• Overall length: 125” (3,175mm) - Includes 2’’ snap hook • 2” (50.8mm) Cam Buckle on one end
• Weight rating: 4,000 lbs. (1,814.37 kg) hardware • Plain end opposite the buckle

ACRA1004T ACRA1006
1.5 lbs. (0.68 kg) 2 lbs. (0.90 kg)

54 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Frame Tent Jack / Lift Polyester Drop Cloths TENT INSTALLATION HARDWARE

• Recommended for use when installing all frame tents • Keeps tent tops clean reducing pin holes
• Reduces labor on frame tent installations
• Lifts frame while legs are inserted • Hemmed around the perimeter Extend the life of
• Safer installation than manual labor • #3 brass grommets
• Should be positioned close to fittings during use
• Cable & winch system for raising and lowering frame • Protects your tent investment your tent tops!
• Special “hook” design fits perfectly around perimeter of frame • Used for tent set up and tear down
• Base accepts standard 1” (25.4mm) dia. stakes to increase stability during use
• Large tires for easy transport • Standard color white (colors may vary)
• Height is 12’ (3.65m)
• Collapsible design • Lightweight & dries easily

ACFT12C
99 lbs. (44.9 kg)

Approximate Size Tent/Mid Size SKU Wt./ lbs.

25’ (7.6m) x 25’ (7.6m) 20’ (6.1m) x 20’ (6.1m) ACPDC2525 15 (6.80 kg)
25’ (7.6m) x 45’ (13.7m) 20’ (6.1m) x 40’ (12.1m) ACPDC2545 25 (11.3 kg)
35’ (10.6m) x 35’ (10.6m) 30’ (9.1m) x 30’ (9.1m) ACPDC3535 27 (12.2 kg)
45’ (13.7m) x 45’ (13.7m) 40’ (12.1m) x 40’ (12.1m) ACPDC4545 46 (20.8 kg)

Commercial Grade Tarpaulins

• Commercial Grade Tarpaulins
• Use on trailers, trucks, equipment covers or in any application to stay dry
• Constructed of durable coated PVC fabric
• Brass grommets every 30” (762mm) around perimeter
• Hemmed on all sides
• 18 oz. material

Insert stakes for additional stability
Stakes sold separately

Concrete Anchors Size SKU Color Wt./ lbs.
8’ (2.4m) x 10’ (3.1m) 18FT810 Black 11 (4.9 kg)
• Offer an alternative approach to installing tents on concrete 10’ (3.1m) x 10’ (3.1m) 18FT1010 Black 14 (6.3 kg)
• ½” hole drilled into concrete, anchor dropped into place, & bolt tightened 10’ (3.1m) x 12’ (3.6m) 18FT1012 Black 16 (7.2 kg)
• Reusable & ideal for installations on streets, parking garages, & 10’ (3.1m) x 15’ (4.5m) 18FT1215 Black 30 (13.6 kg)
driveways 15’ (4.5m) x 15’ (4.5m) 18FT1515 Black 36 (16.3 kg)
• Dimensions: 3” (76.2mm) lag, 0.5” (12.7mm) diameter, & 0.5” (12.7mm) lag bolt 15’ (4.5m) x 20’ (6.1m) 18FT1520 Black 47 (21.3 kg)
20’ (6.1m) x 20’ (6.1m) 18FT2020 Black 62 (28.1 kg)
ACCAU002 *36’ (10.9m) x 60’ (18.2m) 834000X088619 Tan 251 (113.8 kg)
1 lbs. (0.5 kg)

*Conforms to Military Specification MIL-C-43006

Multipurpose Expansion Drop In Anchors, Setting Tool, & Eyebolts

Zinc Plated C1008 Steel Concrete Anchors Setting Tool Eyebolt Tie-Down

Anchor Drill Min Ultimate Strength, lbs. Shear Qty. SKU Wt./ Item # Wt./ Load Limit (A) (C) SKU Wt./
Size Diameter Depth lbs. lbs. lbs.
Length Tension
-
3/8”-16 1/2” 1 1/2” 1 1/2” 3,960 4,160 10 A0375CA - A0375ST - 1,300 1 1/4” 1” A0375EB -
2,400 1 1/2” 1 3/16” A0500EB .80
1/2”-13 5/8” 2” 2” 6,240 7,000 10 A0500CA - A0500ST - 4,000 1 3/4” 1 3/8” A0625EB -
5,000
5/8”-11 7/8” 2 1/2” 2 1/2” 8,680 11,080 4 A0625CA .40 A0625ST .80 2” 1 1/2” A1000EB C
Eyebolt Tie-Down
3/4”-10 1” 3” 3 1/8” 11,000 21,600 4 A1000CA - A1000ST -
A
Steel Concrete Anchor Length Setting Tool

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 55











Rail Curtains TENT ACCESSORIES

• 16 oz Blockout vinyl
• Rail pocket sewn at top and bottom of curtain to support tube insert
• Banners sold separately
• Frame work sold separately (see pages 46 & 47)
• Color options and printing available

Height Width SKU Wt./ lbs.

30” (76.2cm) 9’10” (2.99m) ACRC30X118* 6 (2.7 kg) 2 Way Corner Rail Fitting 2 Way Straight Rail Fitting 1 Way End Rail Fitting
36” (91.4cm) 9’10” (2.99m) ACRC36X118* 6 (2.7 kg) F202WCRF F222WSRF F211WERF
42” (106.6cm) 9’10” (2.99m) ACRC42X118* 6 (2.7 kg)
30” (76.2cm) 11’10” (3.61m) ACRC30X142* 7 (3.1 kg)
36” (91.4cm) 11’10” (3.61m) ACRC36X142* 7 (3.1 kg)
42” (106.6cm) 11’10” (3.61m) ACRC42X142* 7 (3.1 kg)
30” (76.2cm) 14’10” (4.52m) ACRC30X178* 9 (4.1 kg)
36” (91.4cm) 14’10” (4.52m) ACRC36X178* 9 (4.1 kg)
42” (106.6cm) 14’10” (4.52m) ACRC42X178* 9 (4.1 kg)

* Indicate Color

Digital Printed Banners (ACSC) Call for Pricing 20’ x 30’

Display Unit Custom Display Unit attached to 20’ x 20’ frame tent
7’ x 20’ - banner height 6’ high
• Great for trade shows, exhibitions, vendor booths, & more

• Increase sales by attracting more attention to your tent

• Unit is 2’ (0.61m) high and comes in 10’ (3.1m) & 15’ (4.5m) lengths

• Compatible with frame & pole tents

• Customized banners available & sold separately (Call for Details)

Galvanized Frame Bay Size Wt./ lbs.
7’ (2.1m) X 10’ (3.1m) 60 (27.2 kg)
SKU 7’ (2.1m) X 15’ (4.5m) 72 (32.6 kg)
DUSFT007X010GST 8’ (2.4m) X 10’ (3.1m) 62 (28.1 kg)
DUSFT007X015GST 8’ (2.4m) X 15’ (4.5m) 75 (34.0 kg)
DUSFT008X010GST
DUSFT008X015GST

Aluminum Frame Bay Size Wt./ lbs.
7’ (2.1m) X 10’ (3.1m) 47 (21.3 kg)
SKU 7’ (2.1m) X 15’ (4.5m) 55 (24.9 kg)
DUSFT007X010AST 8’ (2.4m) X 10’ (3.1m) 49 (22.2 kg)
DUSFT007X015AST 8’ (2.4m) X 15’ (4.5m) 57 (25.8 kg)
DUSFT008X010AST
DUSFT008X015AST

30” (76.2cm) Pole Strap
AC03GRCAM
.70 lbs. (0.31 kg)

Double Unit attached to a 20’ x 20’ frame tent Unit attached to a 10’ x 10’ frame tent
7’ x 10’ - banner height 2’ high 7’ x 10’ - banner height 2’ high

Tent Flags Exit Sign No Smoking Sign

• Constructed of 14 oz. vinyl secured to a pvc plastic tube • 8” (20.3cm) x 12” (30.4cm) • 8” (20.3cm) x 12” (30.4cm)

• Designed for use on top of traditional pole tents & pinnacle tents • Reflective Lettering

• 12” (30.4cm) x 27” (68.5cm) triangular shape ACAVT83642 ACAVT83639
.08 lbs. (0.03 kg) per sign .08 lbs. (0.03 kg) per sign
• PVC plastic tube core size ID 1.57” (3.9cm), OD 1.66” (4.2cm)

Color SKU
White ACFLAG1200
Red ACFLAG1201
Forest Green ACFLAG1202
Blue ACFLAG1203
Yellow ACFLAG1204

.36 lbs. (0.16 kg) PRICING AVAILABLE AT WWW.GETTENT.CO.UK 61
CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041

TENT ACCESSORIES Disposable Pole Covers

• Constructed using durable 4 mil. poly plastic

• Covers tent poles providing an elegant look

• Perforated for easy cutting

• Hollow center allows pole/tube to pass through easily

• Recommended to cut 1 ½ times the length of the desired pole and “scrunch” the cover for best results:

i.e. a 7’ (2.1m) pole requires 10 ½’ (3.2m) of pole cover

• Other uses include hose covers, ratchet assembly covers, & as a caution indicator

• Flame retardant

• Fits up to a 2.5” (6.35cm) pole

Size Color SKU Wt./lbs.

5” (12.7cm) X 750’ (228.6m) Roll White ACDPC0400 12 (5.4 kg) Also available in white

5” (12.7cm) X 750’ (228.6m) Roll Red ACDPC0401 12 (5.4 kg)

5” (12.7cm) X 750’ (228.6m) Roll Green ACDPC0402 12 (5.4 kg)

5” (12.7cm) X 750’ (228.6m) Roll Blue ACDPC0403 12 (5.4 kg)

Water Barrel Cover

• Constructed using 16 oz. vinyl Hook & Loop Hook & Loop
• 3’ (0.91m) high x 24” (60.9cm) diameter x 76” (193cm) circumference Style Flap Top
• Fits most 55 gallon drums 76” (193cm) circumference or less!
• Pull over style provides quick & easy installation Pull Over Solid Top
• Hook & loop style provides a slit down the side for Style
strapping to be hidden and is attached using hook & loop
• Stock color options available in white, black, red, forest green & blue
• 2.5 lbs. (1.1 kg) each

55 Gallon Hook & Loop Hook & Loop Top Before
After
White ACWBHLS00

Black ACWBHLS14

Red ACWBHLS51

Forest Green ACWBHLS52 55 Gallon Printed Solid Top Hook & Loop Flap Top Elastic - Open Top

Blue ACWBHLS53 Pull-Over ACWBPSPRINT ACWBPSPRINTVF ACWBELDP
Hook & Loop ACWBHLSPRINT ACWBHLSPRINTVF N/A
55 Gallon Pull Over Solid Top

White ACWBPS00

Black ACWBPS14 Elastic

Red ACWBPS51 • Held on the barrel with an elastic cord & slides over easily
• Elastic cord is hemmed inside for a clean finished look
Forest Green ACWBPS52

Blue ACWBPS52 Custom
Printing
Additional Sizes! (Size details may vary) Available!

Pull-Over Solid Top - White

5 Gallon ACWBPS05GAL00

20 Gallon ACWBPS20GAL00

30 Gallon ACWBPS30GAL00

Commercial Duty Tent & Structure Doors

• Installs quickly & easily into almost any temporary tent or semi-permanent clear span or event tent

• Integrated extruded aluminum keder tracks provide a clean method of attaching tent fabric to the door frame

• Adds a sophisticated appearance to any tent application

• Each door includes a durable storage and shipping case

• Requires a minimum tent leg height of 8’ (2.4m) to install

• Single or double door available

• Solid, glass, or french pane available Door Design
• 180 day warranty May Vary Upon

Tent Style

Storage Case

62 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

HI-PRO Party Tent Liners & Drapes TENT LINERS

Constructed to accommodate most traditional and high peak tent tops, the HI-PRO tent liner creates an elegant appearance for that special occasion. This universal
tent liner provides an economical solution to making your older tents look brand new again. These liners are ideal for weddings, corporate events, and elegant parties.
Rental companies with HI-PRO tent liners in their inventory definitely have an advantage over their competition. The liner is lifted from the center pole or center fitting
and easily attaches to the perimeter sidewall rope. Sectional liners easily connect to middle sections using hook and loop to expand the length. When done properly,

HI-PRO liners can be installed safely from ground level.

• Constructed of 100% polyester
• Pleated or gathered approximately every 4” (102mm)
• Fits most standard frame or pole tents
• Hides normal wear and tear
• Available in white only
• Flame resistant

Frame Tent Liners

SKU Description

FTLC10101PC Frame Tent Liner 10' (3.1m) x 10' (3.1m) 1 Pc

FTLC10GABLE Frame Tent Liner 10' (3.1m) Gable End

FTLC15GABLE Frame Tent Liner 15' (4.5m) Gable End

FTLC20GABLE Frame Tent Liner 20' (6.1m) Gable End

FTLC30GABLE Frame Tent Liner 30' (9.1m) Gable End 40’ x 60’

FTLC40GABLE Frame Tent Liner 40' (12.1m) Gable End

FTLC1005E Frame Tent Liner 10' (3.1m) x 5' (1.5m) Ends

FTLC1507E Frame Tent Liner 15' (4.5m) x7.5' (2.3m) Ends

FTLC2010E Frame Tent Liner 20' (6.1m) x 10' (3.1m) Ends

FTLC3015E Frame Tent Liner 30' (9.1m) x 15' (4.5m) Ends

FTLC4020E Frame Tent Liner 40' (12.1m) x 20' (6.1m) Ends

FTLC1005M Frame Tent Liner 10' (3.1m) x 5' (1.5m) Mid

FTLC1010M Frame Tent Liner 10' (3.1m) x 10' (3.1m) Mid

FTLC1505M Frame Tent Liner 15' (4.5m) x 5' (1.5m) Mid

FTLC1510M Frame Tent Liner 15' (4.5m) x 10' (3.1m) Mid Pole Tent Liners

FTLC1515M Frame Tent Liner 15' (4.5m) x 15' (4.5m) Mid SKU Description
PTLC2010E Pole Tent Liner 20' (6.1m) x 10' (3.1m) Ends
FTLC2005M Frame Tent Liner 20' (6.1m) x 5' (1.5m) Mid
PTLC3015E Pole Tent Liner 30' (9.1m) x 15' (4.5m) Ends
FTLC2010M Frame Tent Liner 20' (6.1m) x 10' (3.1m) Mid PTLC4020E Pole Tent Liner 40' (12.1m) x 20' (6.1m) Ends
PTLC2010M Pole Tent Liner 20' (6.1m) x 10' (3.1m) Mid
FTLC2015M Frame Tent Liner 20' (6.1m) x 15' (4.5m) Mid PTLC2020M Pole Tent Liner 20' (6.1m) x 20’ (6.1m) Mid
PTLC3010M Pole Tent Liner 30' (9.1m) x 10' (3.1m) Mid
FTLC2020M Frame Tent Liner 20' (6.1m) x 20' (6.1m) Mid PTLC3015M Pole Tent Liner 30' (9.1m) x 15' (4.5m) Mid
PTLC4010M Pole Tent Liner 40' (12.1m) x 10' (3.1m) Mid
FTLC0305M Frame Tent Liner 30' (9.1m) x 5' (1.5m) Mid PTLC4020M Pole Tent Liner 40' (12.1m) x 20' (6.1m) Mid

FTLC3010M Frame Tent Liner 30' (9.1m) x 10' (3.1m) Mid

FTLC3015M Frame Tent Liner 30' (9.1m) x 15' (4.5m) Mid

FTLC3020M Frame Tent Liner 30' (9.1m) x 20' (6.1m) Mid

FTLC4010M Frame Tent Liner 40' (12.1m) x 10' (3.1m) Mid

FTLC4015M Frame Tent Liner 40' (12.1m) x 15' (4.5m) Mid

FTLC4020M Frame Tent Liner 40' (12.1m) x 20' (6.1m) Mid Center Pole and Leg Drapes

SKU Pinnacle Tent Liners SKU Description
FCP1010 CPD17 17' (5.1m) Center Pole Drape with Sash
FCP1515 Description CPD18 18' (5.4m) Center Pole Drape with Sash
FCP2020 Tent Liner 10' (3.1m) x 10' (3.1m) Pinnacle CPD21 21' (6.4m) Center Pole Drape with Sash
Tent Liner 15' (4.5m) x 15' (4.5m) Pinnacle CPD22 22' (6.7m) Center Pole Drape with Sash
Tent Liner 20' (6.1m) x 20' (6.1m) Pinnacle

LD0740 7' (2.1m) x 40" (1m) Leg Drape with Sash
LD0840 8' (2.4m) x 40" (1m) Leg Drape with Sash
LD0940 9' (2.7m) x 40" (1m) Leg Drape with Sash

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 63

TENT MAINTENANCE, CLEANING, & REPAIR Vinyl Cement Pin Hole Patch

• Waterproof, strong, & provides flexible bonds • Patches pin holes easily

• Recommended for use on vinyl laminated materials • Dries fast providing long term outdoor durability

• Excellent for patching holes • Brush top lid

• Temperature & water resistant • Ideal for 14 oz. & 16 oz. vinyl

• 4 oz. Can

Size SKU Wt./ lbs. Color SKU

4 oz. Can ACHH664OZ 1 (0.45 kg) White ACPHP00
Pint Can ACHH66PC 2 (0.91 kg) Red ACPHP01
Quart Can ACHH66QC 2 (0.91 kg) Blue ACPHP03
Gallon Can ACHH66GC 6 (2.72 kg) Yellow ACPHP04

• Gallon can cannot ship UPS 1 lbs. (0.45 kg) per can

Vinyl Repair Kit Hand Held Heat Sealer Kit

• 1’ by 5’ (0.3m x 1.5m) of vinyl - 5 square feet (0.46 square meters) total Kit Includes:
(one color per kit) • Toolbox
• 2” (50.8mm) Silicone pressure roller
• Includes 4 oz. can of vinyl cement • Hand held heat sealer
• Available in 14 oz. or 16 oz. vinyl • Wide slot nozzle 1.5” (40mm)
• Patches should be cut in oval shapes
• Numerous colors available ACSRK01
6.5 lbs (2.95 kg)

ACVRK* Dead Blow Hammer
1 lbs. (0.45 kg)
*Please specify color when ordering • 3.5 lbs. (1.58 kg) Mallet w/ 12” (30.4cm) Handle Steel Reinforced, for setting grommets
• Will not damage tool like conventional hammers
Pressure Roller HW35DBH
4 lbs. (1.81 kg)
• One-arm pressure roller 40mm, with ball bearings (silicon)
Ball Bungee Tie Downs
ACSR2IN
1 lbs. (0.45 kg) • Easily stretches for multiple use
• 6” (15.2cm) length
64 PRICING AVAILABLE AT WWW.GETTENT.COM • Sold in quantities of 25
ACBB6W
1 lbs. (0.45 kg)

Available in white only

CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

#6 Grommet Kit #3 Grommet Kit TENT MAINTENANCE, CLEANING, & REPAIR

Kit Includes: Kit Includes:
• 18, #6 rolled rim grommets & spur washer • 18, #3 sheet grommets & spur washers
• Die setter • Die setter
• Cutter • Cutter
• Wood block • Wood block

K2366 K2363
5 lbs. (2.26 kg) 3 lbs.(1.36 kg)

#6 Grommets #3 Grommets

• #6 Rolled Rim Grommets & Spur Washer • #3 Sheet Grommets & Spur Washer
• 3/4” (6.35mm) Inside diameter • 7/16” (11.11mm) Inside diameter
• 1 9/16” (39.6mm) Outside diameter • 1” (25.4mm) Outside diameter
HW6SWG
.04 lbs. (0.02 kg) HW3ETWG
.02 lbs. (0.01 kg)
Standard component on Celina Pole Tent Pole Locations
Standard component on Celina Sidewalls and Grommet End Sectional Tents
#6 Grommet Die Setting Tool
#3 Grommet Die Setting Tool
• For use with #6 Grommets & spur washer
• 3/4’’ (6.35mm) Inner diameter • For use with #3 Grommets & spur washer
HW6DS • 7/16’’ (11.11mm) Inner diameter
2 lbs. (0.91 kg)
HW3DS
#3 Hole Cutter - 7/16'' Holes 2 lbs. (0.91 kg)

• 7/16’’ (11.11mm) Inner diameter Polypropylene Rope
HW3HC
2 lbs. (0.91 kg) • Resistance to mildew and moisture
• Great for outdoor use
#6 Hole Cutter - 3/4’’ Holes
Description SKU Wt./ lbs.
• 3/4’’ (6.35mm) Inner diameter
HW6HC 1/4” (6.3mm) x 1200’ (365.7m) Spool ACRPP250X1200 15 (6.80 kg)
2 lbs. (0.91 kg) 3/8” (9.5mm) x 600’ (182.8m) Spool ACRPP375X600 17 (7.71 kg)
1/2” (12.7mm) x 600’ (182.8m) Spool ACRPP500X600 29 (13.1 kg)
5/32’’ Dia Nylon Laceline Rope 5/8” (15.8mm) x 600’ (182.8m) Spool ACRPP625X600 35 (15.8 kg)
1/2” (12.7mm) x 17.5’ (5.3m) Guy Rope ACRGR500X175 1 (0.45 kg)
• 5/32'' (3.97mm) diameter rope
• Used to repair the lace line on sectional tent tops Polyester Rope # 7
• Breaking strength 3.38kn
• Sold in spools containing 328' (100m) • Low stretch with a unique solid core & braided casing
ACALX01 • Used as sidewall replacement rope & anchoring sidewalls
.02 lbs. (0.01 kg) per ft. • Solid core & braided casing
• 7/32” (5.55mm) polyester rope
CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 • 1000 ft. (30.4 m) per roll

ACEPE219
.02 lbs. (0.01 kg) per ft.

PRICING AVAILABLE AT WWW.GETTENT.CO.UK 65

TENT MAINTENANCE, CLEANING, & REPAIR Mold & Mildew Stain Remover SAFE-T-SOLVE

• Color and fabric safe • Removes heavy grease, oil, adhesives, ink, paint, tar, gum, & more
• Removes mold, mildew, dirt, food, and blood stains • Water-based, non-petroleum, & biodegradable
• Gentle on skin with no harmful vapors • High flash point, low VOC, and EPA registration is not required
• Biodegradable and non-choleric powder form • Use as directed
• Ideal on vinyl, boat covers, tarps, plastics, fiberglass, and more
• 12 oz. jar makes 3 gallons of solution 32 oz. spray
• 1 gallon covers up to 150 square feet ACSTS032
3 lbs. (1.4 kg)
12 oz. Jar - makes 3 gallons
ACMMSR012 1 Gallon
1 lbs. (0.5 kg) ACSTSGAL
9 lbs. (4.1 kg)
65 oz. Pail - makes 14 gallons
ACMMSR065 Celina MPT
6 lbs. (2.7 kg) (Mildew Prevention Treatment)

Celina Mold Cleaner • MPT is a mildew prevention product created for tents
• Both sides of the entire tent must be treated to prevent mildew growth
• Incredible cleaner that penetrates and kills mold & mildew spores • Bonds with the molecular structure of the vinyl fabric
• Prevents mildew growth for 1 year • Prevents mildew growth for 1 year
• Highly concentrated and fast acting • Works best when applied to a clean and dry surface
• Active ingredients 5% Calcium Hypochlorite • Pump up sprayer use 1 gallon water to 1 gallon MPT
• Recommended for use on Celina vinyl products only • Mixed with water 1:1 ratio
• Allow 5-10 minutes for Celina Mold Cleaner to act • Will not be removed by washing
• 200 times less corrosive than household bleach • 1 gallon should cover 2,650 square feet
• Dry before use or storage
1 Gallon
1 Gallon MOST ACTC12024
ACTC12010 POPULAR! 10 lbs. (4.5 kg)
10 lbs. (4.5 kg)

Tent Cleaner Celina Citrus Cleaner For LINEN and PVC

• First cleaner developed just for tents • Versatile and 100% biodegradable solvent
• Penetrates and removes dirt film and most mildew stains • No harmful side effects as compared to petroleum based solvents
• Can be used with a pressure washer while tent is erect or manually • Efficiently dissolve adhesive, tar, grease, and oils
while tent is spread on flat surface • Quickly removes adhesive residue from tents, inflatable bouncers,
• Dilute 1 part tent cleaner to 25 parts water PVC, and plastics
• Leaves whites whiter and colors brighter • Great stain remover for candle wax and lipstick on linens, tablecloths, and
• Rinse tents thoroughly napkins
• Dry before use or storage • 2.3 oz / 1 Gallon Water
• Deodorizes
1 Gallon • Non-Toxic
ACTC12011
10 lbs. (4.5 kg) 1 Gallon
ACTC12018
Add Celina’s Tent Cleaner to a dry mop 10 lbs. (4.5 kg)
and wipe dirt away!
COMPLETELY
66 PRICING AVAILABLE AT WWW.GETTENT.COM CLEANS AND REMOVES:

Engine Grease, Tar / Asphalt, Paints / Inks,
Glue / Adhesive, Shoe Polish, Tape Residue, Lipstick,

Crayon, Kitchen Grease, and Chewing Gum

CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Seam Sealer Tear Mender TENT MAINTENANCE, CLEANING, & REPAIR

• Prevents most seams from leaking • Instantly mends any material it can penetrate
• Will not change the look or feel of the material • Easily rubs off fingers and solid surfaces
• Ideal for awnings, tents, boat covers, & backpacks • Does not contain any harsh or harmful chemicals
• Protects sewn seams • Convenient squeeze bottle with applicator tube
• Applies fast, stays flexible, permanent, & dries quickly
4 oz. Bottle
ACSS004 2 oz. Bottle
1 lbs. (0.5 kg) ACTM002
1 lbs. (0.5 kg)
1 Gallon
ACSS128 6 oz. Bottle
9 lbs. (4.1 kg) ACTM006
1 lbs. (0.5 kg)

E-Z Snap Lubricant Colored Duct Tape - Industrial Duty

• Ideal for tents, boat covers, and wet/dry suit zippers • 2” (5.08cm) x 180’ (54.8m) roll, 10 mil
• For use with snap zippers, hinges, and hardware • Great for last minute temporary repairs on tents & sidewalls
• Lubricates, waterproofs, and reduces friction • Secure lighting, extension cords, and other hard to secure items
• Will not rinse away or dissipate in hot weather • Ideal for weatherproofing
• Keeps snaps from corroding & locking up
• Does not contain solvents, silicone, or teflon Color SKU Also Available in Green and Blue
• Keeps zippers free flowing White ACS377W
Red ACS377R
ACEZS001 Blue ACS377B
0.10 lbs. (0.05 kg) Green ACS377G
Yellow ACS377Y

1.5 lbs. (0.7 kg) per roll

Tear-Aid

• Constructed using a tough matte finish elastomer

• Abrasion, puncture, & tear resistant

• Powerful adhesive formulated for high bond strength

• Provides a simple and easy way to patch holes & tears

• See through patch keeps your material looking the same

Type A Original Polyethylene Type A • Each kit includes:
Polypropylene ACTAA (1) 3” (7.62cm) x 12” (30.4cm) patch
Sticks to: Polyurethane (1) 0.87” (0.22cm) x 0.87” (0.22cm) patch
Canvas Non-oiled leather Type B (1) 1.37” (34.7cm) x 0.37” (9.39cm) patch
Most fabrics Sunbrella ACTAB (1) 12” (30.4cm) reinforcement filament, and two alcohol prep pads
Rubber Type B Vinyl Only
Neoprene
Most plastics Sticks to:
Nylon Vinyl
Stainless steel Vinyl coated materials
Aluminum steel

Alligator Clip Repair Assembly Ring Repair Assembly 4 Way Ring Assembly
ACHWPBR4WAY
• Standard 1” (2.54cm) alligator clip • Standard 2” (5.08cm) webbing 1 lbs. (0.5 kg)

• For frame tent use • For pole tent use

ACACRA1 • Includes 4 oz. can of vinyl cement,
1 lbs. (0.5 kg)
bolts, nuts and washers

3 Way Ring Assembly
ACHWPBR3WAY
1 lbs. (0.5 kg)

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 67











Knock Down Pedestal Table TABLES

• Converts to 30” (76.2cm) or 42” (106.6cm) in height 42”
• 30” (76.2cm) or 36” (91.4cm) round top
• 28” (71.1cm) star base 30”
• Some assembly required
• Sold in units of 2

30” (76.2cm) Round Top
KDPT30R
27 lbs. (12.2 kg)

36” (91.4cm) Round Top
KDPT36R
29 lbs. (13.1 kg)

Converts to Knock down pedestal table includes:
30” or 42” (1) 30” or 36” round top, (1) 28” star base
in Height (1) 30” pedestal column, (1) 42” pedestal column

Table Top Bag 32'' x 32'' Tent Seating Chart

• Measures 32” x 32” (0.81m x 0.81m) Tent Size W x L Square Stand-Up Buffet Sit Down Cathedral
• Holds two 30’’ (76cm) table tops per bag Footage Cocktail Dinner Dinner Seating
• Separating sleeve inside to create two separate compartments
• Hook and loop strap closes the top of the bag 20’ Wide 20 x 20 400 67 50 40 67
• 2 exterior pole storage pockets (1 per side) 30’ Wide
• 2” (50.8mm) wide strap handles for easy carrying 20 x 30 600 100 75 60 100
40’ Wide 20
B1013 20 x 40 800 133 100 80 133
3.45 lbs. (1.56 kg) 60’ Wide 20
80’ Wide 30 x 50 1000 167 125 100 167
30
30 x 60 1200 200 150 120 200
30
30 x 30 900 150 113 90 150
30
30 x 40 1200 200 150 120 200
30
30 x 45 1350 225 169 135 225
40
40 x 50 1500 250 188 150 250
40
40 x 60 1800 300 225 180 300
40
40 x 75 2250 375 291 225 375
40
40 x 90 2700 450 338 270 450
40
60 x 105 3150 525 394 315 525
60
60 x 120 3600 600 450 306 600
60
60 x 40 1600 267 200 160 267
80
80 x 60 2400 400 300 240 400
80
80 x 80 3200 533 400 320 533
80
Table Upright Pole Bag 30'' 80 x 100 4000 667 500 400 667
80
• Holds 10 poles up to 30’’ (0.76m) long x 120 4800 800 600 480 800
• Genuine leather reinforced bottom
• Sewn-in sleeves to keep poles separated x 140 5600 933 700 560 933
• 2” (50.8mm) reinforced, backpack-style straps for easy carrying
• Hook and loop securing strap for cover x 160 6400 1067 800 640 1067
B1012
2.9 lbs. (1.32 kg) x 180 7200 1200 900 720 1200

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 x 200 8000 1333 1000 800 1333

x 60 3600 600 450 360 600

x 80 4800 800 600 480 800

x 90 5400 900 675 540 900

x 100 6000 1000 750 600 1000

x 120 7200 1200 900 720 1200

x 80 6400 1067 800 640 1067

x 100 8000 1333 1000 800 1333

x 120 9600 1600 1200 960 1600

x 140 11200 1867 1400 1120 1867

x 160 12800 2133 1600 1280 2133

x 180 14400 2400 1800 1440 2400

x 200 16000 2667 2000 1600 2667 73

PRICING AVAILABLE AT WWW.GETTENT.CO.UK

TABLES Fill ‘N Chill Party Table

• 500 lbs. (226.7 kg) capacity including 75 (32.6 kg) to 100 lbs. (45.3 kg) of ice
• Available in white and black
• Tapered bottom features a 2 stage drainage system
• Rugged, lightweight construction
• Durable, easy-to-clean, one piece, FDA-approved
• Polyethylene table top
• Sturdy, powder coated, collapsible steel legs
• Stackable design for convenient storage
• Easily transportable in a mini-van or SUV
• Inside dimensions: 29” (73.6cm) x 69” (175.2 kg), 3½” (8.89cm) deep
• Exterior dimensions: 31” (78.7 cm) x 73” (185.4cm), 6½” (16.5cm)deep
• Indoor & outdoor use

White
1FNC7765
Black
1FNC8765
58 lbs. (26.3 kg)

2/3 table depth extenders, table insert, clips and skirting not included.

8” Table Depth Extension Chillin’ Banquet Cart

• Accessorize your Fill ‘N Chill table with removable depth • Place Fill “N Chill Table (not included) with legs folded on
extensions ideal for tall containers banquet cart for easy moving
• Panels made of clear Lexan • Powder Coated 1” (25.4mm) square tube steel
• Extensions include 4 long panels, 3 short panels, • Heavy Duty 5” (127.0mm) wheels
4 corner pieces, and 2 center “T” pieces • Weight capacity 1000 lbs. (453.5 kg)
• Available in white and black • Brushed stainless steel bottom shelf

White 10BC7254
10DE1039 115 lbs. (52.1 kg)
Black
1DE8039
17 lbs. (7.7 kg)

Fill ‘N Chill not included Fill ‘N Chill not included

2/3 Table Depth Extension Chillin’ Kwik Cover

• Panels made of clear Lexan Optional Insert • Disposable plastic cover
• Available in white and black • Protect food and beverages
• Cover table prior to arrival of guests
White • Ideal for outdoor settings
10DE1223 • Available in white only
Black • 50 per case
10DE8223
17 lbs. (7.7 kg) Fill ‘N Chill & insert 10KC0428
not included 1 lbs. (2.5 kg)

Fill ‘N Chill not included

Table Insert for Fill ‘N Chill Sneezeguard for Fill ‘N Chill

• Dimensions: 26” (66cm) x 24” (60cm) x 3.5” (8.9cm) deep • Protect food and beverages

• Made with high density polyethylene • One sided

• Available in white and black

White 10SG0617
10IN0929 25 lbs. (10.8 kg)
Black
10IN8929 Insert shown in use above Fill ‘N Chill, banquet cart, &
5lbs. (2.27 kg) 2/3 depth extension not included

74 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Little Chiller Party Table TABLES

• Designed to hold ice keeping food and beverages cold
• Weight capacity 350 lbs. (158.7 kg) including 35 (15.8 kg) to 50 lbs. (22.6 kg) of ice
• Dimensions Outside 48'' (1.2m) x 24'' (0.6m) x 6 ½'' (165mm) Depth
• Dimensions Inside 44'' (1.1m) x 20'' (0.5m) x 3 ½'' (89m) Well Depth
• High Density Polyethylene
• Rugged, lightweight construction
• Stackable design for convenient storage
• Easily transportable in a mini-van or SUV
• Powder coated steel legs
• Indoor & outdoor use

White
1LCT0516
Black
1LCT8516
40 lbs. (18.1 kg)

Little Chiller Insert Little Chiller Full Depth Extension

• The Little Chiller insert provides a level tabletop • Increases working depth of Little Chiller Party Table to 6 1/2'' (16.5 cm)
• Area covers 1/3 of the inside of the table • Better accommodate long neck bottles and tall containers
• Use for tableware or as part of a portable bar set up • Can be constructed for use in ½ the table or entire table
• High Density Polyethylene • Extensions include 4 - 21'' (53.3m) panels, 3 - 18'' (45.7cm) panels
• Assembled with stainless steel screws
• Dimensions: 14 ½'' (0.4m) X 20'' (0.5m) made of clear Lexan 4 corner pieces, 2 center “T’’ pieces made of polyethylene
• Use in-conjunction with little chiller 2/3 depth extension • Table will accommodate 4 ½ cases of beverages (12 oz bottles)
• Not recommended for use with full depth extensions
White
White 10DE0928
10IN0309 Black
Black 10DE8928
10IN8389 15 lbs. (6.8 kg)
5 lbs. (2.26 kg)

Little Chiller Party Table and Little Chiller 2/3 Depth Extension not included Little Chiller Party Table not included

Little Chiller 2/3 Depth Extension Fill ‘N Chill Skirt Clips

• Increases working depth of Little Chiller Party Table to 6 ½'' (16.5 cm) • Fits the standard Fill ‘N Chill Party Table or the Little Chiller Table
• Better accommodate long neck bottles and tall containers • Clip slides over the edge of the table; along the back of the clip is a patch
• Can be constructed for use in 1/3 or 2/3 of table of hook fastener, allowing you to connect the loop-backed skirting by simply
• Extensions Include: 4 - 20'' (50.8cm) panels, 4 -14''(35.5cm) pressing it to the clip
• Panels made of clear Lexan • Sold in units of 25
• 8 corner pieces made of polyethylene
Black
White 1CP87622
10DE1060 White
Black 1CP77622
10DE8060
15 lbs. (6.8 kg)

Little Chiller Party Table, insert & skirting not included PRICING AVAILABLE AT WWW.GETTENT.CO.UK 75

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041

LINENS, TABLECLOTHS & NAPKINS Vinyl Table Covers Great for
Food Service
• Constructed of 1st quality 16 oz blockout vinyl Applications!
• Great for outdoor or indoor use
• Water resistant and easy to clean
• 3 or 4 sided size option
• Length of third side is 12’’ (30.4cm) for 3 sided covers
• Flame Resistant, meets CPAI-84
• High definition digital printing

Size SKU 3 Sides
Open Back
4’ (1.21m)- 3 Sided Vinyl Table Cover TC48LOFITTED50
6’ (1.82m)- 3 Sided Vinyl Table Cover TC72LOFITTED50
8’ (2.43m)- 3 Sided Vinyl Table Cover TC96LOFITTED50
4’ (1.21m)- 4 Sided Vinyl Table Cover TC48LOFITTED504
6’ (1.82m)- 4 Sided Vinyl Table Cover TC72LOFITTED504
8’ (2.43m)- 4 Sided Vinyl Table Cover TC96LOFITTED504

Plastic Table Skirting

• 29” (0.74m) x 14’ (4.27m) Adjustable up to 19’ (5.79m)
• 3.5 mil thick, heavy-duty plastic
• Multiple colors available (see plastic table cover color options below)
• 6 per case

#529 (Color Code)
10 lbs. (4.54 kg) per case

Plastic Table Covers View seating options online at www.GetTent.com

Colors Available Oblong
Round
(BE) Beige, (BB) Blueberry, (BK) Black, (BL) Blue, (BU) Burgundy, (CH)
Chocolate, (CL) Clear, (GO) Gold, (HY) Harvest Yellow, (HP) Hot Pink, (HG)
Hunter Green, (IV) Ivory, (KG) Kelly Green, (LV) Lavender, (LB) Light Blue,
(ML) Melon, (MT) Metallic Gold, (MG) Mint Green, (NB) Navy Blue, (PE) Peach,
(PK) Pink, (PR) Purple, (RD) Red, (RO) Rose, (SI) Silver, (SB) Slate Blue, (YL)
Yellow, (TG) Tangerine, (TL) Teal, (WH) White

Size SKU Wt./ lbs.

72” (1.82m) Rd #72 (Color Code) 10 (4.54 kg) per case
84” (2.13m) Rd 12 (55.3 kg)per case
54” (1.37m) x 108” (2.74m) #84 (Color Code) 10 (4.54 kg) per case
24 Per Case #549 (Color Code)

Fast - Covers Fast - Cover 60” Round

• Adjustable corners & adhesive strips • 60” (1.52m) round plastic custom fit
provide a custom fit without wrinkles • 2 mil table cover with adjustable elastic
• Heavy duty, 2-mil thick plastic • Available in white only
• Disposable for easy clean-up • Easy clean up
• 30” (0.76m) x 96” (2.44m) • 24 per case
• 24 per case
FC60WH
#FC549WH (white) 10 lbs. (4.54 kg) per case
#FC549RD (red)
#FC549BK (black)
#FC549BL (blue)
10 lbs. (4.54 kg) per case

76 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Custom Printed Table Runners LINENS, TABLECLOTHS & NAPKINS

• 100% Woven Polyester, long lasting & easy care

• Hemmed Edges

• Flame Resistant, meets the NFPA 701 small scale

• Machine washable & wrinkle resistant

Size Print Area SKU Table Covers not
30”w x 88”h Front, Top & Back TCRUNNER30X88 included with runner
36”w x 88”h Front, Top & Back TCRUNNER36X88
48”w x 88”h Front, Top & Back TCRUNNER48X88 8” x 108” Chair Sash

Polyester Tablecloths Square & Banquet Style
Tablecloths
• 100% Polyester, long lasting, and easy care

• Samples not available

• Stock colors: white (W), black (B), and ivory (I)

• Special order colors:
Oyster, Tan, Honey, Camel, Cornsilk, Maize, Lemon, Goldnerod, Gold, Acid Green, Cafe,
Toast, Army Green, Olive, Ice Peach, Peach, Coral, Orange, Neon Orange, Copper, Burnt
Orange, Terra Cotta, Brick, Chocolate, Espresso, Mint, Seamist, Sage, Aqua, Caribbean,
Turquoise, Jade, Teal, Lagoon, Lime, Neon Green, Kelly, Emerald, Moss, Hunter, Forest,
Light Blue, Ice Blue, Slate, Wedgewood, Periwinkle, Cobalt, Royal, Deep Royal, Navy, Mid-
night, Ice Pink, Light Pink, Pink Balloon, Dusty Rose, Mauve, Neon Pink, Hot Pink, Water-
melon, Raspberry, Magenta, Aubergine, Ruby, Burgundy, Holiday Red, Cherry Red, Lilac,
Plum, Purple, Silver, & Charcoal

Size SKU Wt./ lbs. 20” x 20” Napkins

90” (2.29m) Round MTA90* 3 (1.36 kg)
96” (2.43m) Round MTA96* 3 (1.36 kg)
108” (2.74m) Round MTA108* 4 (1.81 kg)
120” (3.04m) Round MTA120* 4 (1.81 kg)
132” (3.35m) Round MTA132* 5 (2.26 kg)
8” x 108” Chair Sash MTA08X108CT* 2 (0.90 kg)
20” (0.2m) x 20” (2.74m) Napkin (Dozen) MTA20X20ND* 2 (0.90 kg)
54” (1.37m) x 54” (1.37m) MTA54X54* 2 (0.90 kg)
70” (1.82m) x 70” (1.82m) MTA70X70* 2 (0.90 kg)
90” (2.28m) x 90” (2.28m) MTA90X90* 3 (1.36 kg)
60” (1.52m) x 120” (3.04m) MTA60X120* 3 (1.36 kg)
72” (1.82m) x 120” (3.04m) MTA72X120* 3 (1.36 kg)

* Indicate Color

Round Tablecloths

Shirred Skirting

• Includes hook & loop & 3/4” (19.0mm) clips with hook
• Applicable Table Thickness: 5/8” (15.88mm)
• Attachment Clip Spacing: 1’ (304.8mm)
• 100% polyester
• Skirting Available in White, Black, & Ivory ONLY
• Sold in Units of 2

Size SKU Wt./ lbs.

13’ (3.96m) x 29” (73.7cm) Shirred Skirting MTA14SKT* 4 (1.81 kg)
17’ (5.18m) x 29” (73.7cm) Shirred Skirting MTA17SKT* 5 (2.26 kg)
21’ (6.40m) x 29” (73.7cm) Shirred Skirting MTA21SKT* 7 (3.17 kg)

* Indicate Color PRICING AVAILABLE AT WWW.GETTENT.CO.UK 77
CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041

LINENS, TABLECLOTHS & NAPKINS Custom Printed Table Covers

Celina’s printed table covers are perfect for promotional events, trade

shows, conventions, pop up tents, retailers and much more!

• 100% Woven Polyester, long lasting & easy care

• Hemmed Edges (Rounded corners on draped styles) 3 Sides
Open Back
• Flame Resistant, meets the NFPA 701 small scale

• Machine washable & wrinkle resistant

• High definition printing Easy Access
Zipper Back
• No setup, art or other hidden charges!
Draped Table Covers
• Receive a FREE Digital Proof with all Quote Requests!

Size & Style SKU

8’ Draped High Definition (Full Color) Table Cover TC96HDDRAPED

6’ Draped High Definition (Full Color) Table Cover TC72HDDRAPED

4’ Draped High Definition (Full Color) Table Cover TC48HDDRAPED

8’ Fitted High Definition (Full Color) Table Cover TC96HDFITTED

6’ Fitted High Definition (Full Color) Table Cover TC72HDFITTED

4’ Fitted High Definition (Full Color) Table Cover TC48HDFITTED

8’ Three Sided Draped High Definition (Full Color) TC96HDDRAPED3

6’ Three Sided Draped High Definition (Full Color) TC72HDDRAPED3

4’ Three Sided Draped High Definition (Full Color) TC48HDDRAPED3

Easy Access Table Covers Quantity
Pricing Available
• Fitted table covers that fit snug to 3 sides of the table Call for Details
& have a zippered easy access opening in the back

Size SKU Wt./ lbs. Fitted Table Covers
4’ Easy Access TC48HDFITCS
6’ Easy Access TC72HDFITCS 3 (1.36 kg)
8’ Easy Access TC96HDFITCS 3.5 (1.58 kg)
4 (1.81 kg)

Fitted Round Table Covers Convertible Table Covers

• Best for indoor or short term outdoor use • Easily converts a fitted table cover to a draped table cover
• 72” Dia x 29” tall will have a top seam(s) • Uses hook and loop attachments
• Designed to fit standard 4’, 6’ or 8’ banquet style tables
Size SKU Wt./ lbs.

36” Dia x 29” Tall TCBS36X29HD 2.5 (1.13 kg) Size SKU Wt./ lbs.
48” Dia x 29” Tall TCBS48X29HD 3 (1.36 kg)
60” Dia x 29” Tall TCBS60X29HD 4 (1.81 kg) 4’-6’ Convertible TCC48F72DHD 2.5 (1.13 kg)
72” Dia x 29” Tall TCBS72X29HD 4.5 (2.04 kg) 6’-8’ Convertible TCC72F96DHD 3 (1.36 kg)

4’ Fitted Converts
to a 6’ Draped

6’ Fitted Converts
to a 8’ Draped

Couture Table Covers Standard
lead time
• Spandex / polyester fabric, long lasting & easy care 5-8 days after
• Great for indoor or outdoor use, will not blow away! artwork approval.
• Sleek contour fit eliminates wrinkles Quick ship options
• Machine washable available!

Size SKU

4’x 29’ Four Sided Banquet Fitted TCPS48HD

6’x 29” Four Sided Banquet Fitted TCPS72HD

8’x 29” Four Sided Banquet Fitted TCPS96HD

30” Dia x 29” Tall Round Fitted TCPS3029HD

36” Dia x 29” Tall Round Fitted TCPS3629HD

48” Dia x 29” Tall Round Fitted TCPS4829HD

60” Dia x 29” Tall Round Fitted TCPS6029HD

72” Dia x 29” Tall Round Fitted TCPS7229HD

30” x 42” Tall Round Pedestal Fitted TCPS3042HD

36” x 42” Tall Round Pedestal Fitted TCPS3642HD

78 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Attention Catcher Flags & Accessories
FLAGS
Size Description SKU
Celebrate!
Blade - Single Sided Print
TENT RENTALS
Small Blade Flag Fabric, Single Side FFBS1
Medium Blade Flag Fabric, Single Side FFBM1
Large Blade Flag Fabric, Single Side FFBL1

Blade - Double Sided Print

Small Blade Flag Fabric, Double Side FFBS2
Medium Blade Flag Fabric, Double Side FFBM2
Large Blade Flag Fabric, Double Side FFBL2

Tear Drop - Single Sided Print

Small Tear Drop Flag Fabric, Single Side FFTS1
Medium Tear Drop Flag Fabric, Single Side FFTM1
Large Tear Drop Flag Fabric, Single Side FFTL1

Tear Drop - Double Sided Print

Small Tear Drop Flag Fabric Double Side FFTS2
Medium Tear Drop Flag Fabric Double Side FFTM2
Large Tear Drop Flag Fabric Double Side FFTL2

Poles Small Medium Large

Blade FHBLSM01 FHBLMD02 FHBLLG03
FHTDLG03
Tear Tear Drop FHTDSM01 FHTDMD02
Drop

Large Stock Flags Large Wall
16’ (4.9m) Available 16’ (4.9m) Mounts
on
Blade Medium 25 Degree
GetTent.com 11’ (3.4m) FA0006
Plate Weight
15.5” x 15.5” Medium 90 Degree
11.5’ (3.5m) FA0007
FA0004

X Stand Small HOT Small
28”x 32” 8’ (2.4m) FRESH 7’ (2.1m)
FA0003 PIZZA!
Call Today! CWar
Anchor Pin DEAL
19” Long x 1/2” Dia. A TODAY
S
FA0001 H $5

Wheel / Tire V Stand
FA0005

Base Height Not Included. All Sizes are approximate. 180 Degree
FA0008
Screw In Anchor Backpack Flags
9” Thread Teardrop
FA0009 • Hands-free mobile marketing! Rectangle
• Light weight and comfortable
Plastic Weight Water Weight Bag • Aluminum/fiber glass pole kit Blade
FA0010 FA0002 • Easy Assembly
• Single or double sided printing options

Description SKU 79
Backpack FBP03
Flag Rectangle - Single Sided FFBPR1
Flag Rectangle - Double Sided FFBPR2
Flag Tear Drop - Single Sided FFBPT1
Flag Tear Drop - Double Sided FFBPT2
Flag Blade - Single Sided FFBPB1
Flag Blade - Double Sided FFBPB2

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK

CHAIRS Oxford Resin Folding Chair BEST Oxford Folding
SELLER!
• Sleek, light weight, and virtually maintenance free Chair Pad
• Interlocking construction for easy stacking & transporting
• Stackable up to 25 chairs high for transport & 40 high for storage • 14”W x 12.75”D (35.6cm x 32.4cm)
• Padded seat cushion is removable and interchangeable • 3/8” (9.53mm) padding
• UV resistant & 100% waterproof
• UV stabilized polypropylene Black
• Never needs to be painted RFCBLK01PAD
• Indoor & outdoor use White
• Height: 30.5” (77.4cm) RFCWHT01PAD
• Width: 17.5” (44.4cm) 1lbs. (0.45 kg)
• Seat Height: 18” (45.7cm)
• Stacking Height: 2 1/8” (5.39cm) Bellbrook Fan Back Poly Folding Chair
• Capacity: 265 lbs. (120.2 kg)
• 1 Year Warranty • Maintenance-free rivets attach seat and back to the frame
• 1250- 20’(6.1 m) Container • 17-gauge (19 x 1.4mm) commercial duty steel frame
• 2700- 40’ (12.1 m) Container • Feet caps are injected molded of tough, non-marring polyethylene
• Quick ship: 56 chairs per pallet • Double riveted rear cross-brace
• Sold in quantities of 4 • 3/8” (0.95cm) from floor for easy set up
• Overlapping back protects the frame
RFCWHT01 White • Width: 17.25’’ (43.8cm)
RFCBLK01 Black • Height: 36’’ (0.91m)
12 lbs. (5.4 kg) per chair • Depth: 18’’ (45.7cm)
• Quick Ship: 84 chairs per pallet
Folding Chair Storage Bag • Also available in 40’ (12.1m) container
• Sold in quantities of 6
• Commercial heavy duty weight canvas
• Stores up to 4 chairs SFFANWW
• Bag contains 4 separate pouches to keep chairs from rubbing White
• Intended for use with Celina’s line of folding chairs 8 lbs. (3.62kg) per chair
• Dimensions: 18.5’’ Wide x 34’’ Tall (0.47m x 0.86m)

WFCBAG01
3 lbs. (1.36 kg)

Bellbrook Poly Folding Chair Replacement Poly Chair
Feet Ganging Clip

Available • Quickly & easily gang

• Maintenance-free rivets attach seat and back to the frame multiple chairs together

• 17-gauge (19 x 1.4mm) commercial duty steel frame

• Feet caps are injected molded from tough, non-marring polyethylene

• Double riveted rear cross-brace

• 3/8” (0.95cm) from floor for easy set up

• Overlapping back protects the frame

• Width: 17.25’’ (43.8cm)

• Height: 36’’ (0.91m) Quantity Black
• Depth: 18’’ (45.7cm) Pricing SFGC02
• Also available in 40’ (12.1m) container Available White
• Quick ship: 120 chairs per pallet SFGC01
0.1lbs. (0.04 kg)
• Sold in quantities of 10
CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT
SF2250EBK Black
SF2250EWW White
SF2250EOW Wedding White (special order only, price may vary)
SF2250ENE Neutral Frame - Chocolate Seat & Back (special order only, price may vary)
SF2250EDB Brown (special order only, price may vary)

8 lbs. (3.62 kg) per chair WWW.CELINATABLESANDCHAIRS.COM
80 PRICING AVAILABLE AT WWW.GETTENT.COM









Staging STAGING

• 4’ (1.21m) x 4’ (1.21m) standard deck sizing stacks and stores easily SL44 SLC44R
• 3/4” (19.1mm) 11 ply exterior black plywood is finished on both sides 4’x4’ Deck 4’x4’ Curved Corner Deck
• Plywood is reversible allowing you to flip when one side becomes used / damaged
• Optional 5/8” (15.8mm) exterior plywood with gray carpet also available
• Roto-locks can be accessed from either the top or bottom of the deck
• Compatible with most other 4’ (1.21m) x 4’ (1.21m) systems
• Deck Capacity - 160 psf

SKU Description Wt./ lbs.

Black Plywood Square Decks 74 (33.5 kg)
48 (21.7 kg)
SL44 4’ (1.21m) x 4’ (1.21m)’ Deck 49 (22.2 kg)

SL24 2’ (0.61m) x 4’ (1.21m) Deck 55 (24.9 kg)
32 (14.5 kg)
SLC45 4’ (1.21m) x 4’ (1.21m) 45 Corner Deck 32 (14.5 kg) SL24 SLC4R
2’x4’ Deck 4’ Curved Deck - Right
Curved Decks 73 (32.6 kg)
51(27.6 kg)
SLC44R 4’ (1.21m) x 4’ (1.21m) Corner Deck 52 (23.5 kg)

SLC4L 4’ (1.21m) Deck - Left

SLC4R 4’ (1.21m) Deck - Right

Carpeted SLC45 SLC4L
4’x4’ 45 Corner Deck 4’ Curved Deck - Left
SL44C 4’ (1.21m) x 4’ (1.21m) Deck
A
SL24C 2’ (0.61m) x 4’ (1.21m) Deck

SLC45C 4’ (1.21m) X 4’ (1.21m) 45° Deck Corner

4’ (1.21m) x 4’ (1.21m) Stage Deck (SL44) (A) Roto-locks (shown with T Handle Wrench) fasten decks
together to form an integrated unit.

(B) Connecting clips allow for easy installation and enables
decks to be offset.

Diagonal angle supports give frame additional
support.

B

Additional Parts Stage Configuration Samples

SKU Description Wt./ lbs. Although the possibilities for stage layouts are virtually endless,
1(0.45 kg) here are some sample layouts to help give you an idea for your
2 (0.91 kg) future stage. Everything from a basic rectangle or circle, to more
1 (0.45 kg) intricate shapes with curves and runways.
1(0.45 kg)
SSTH T Handle Wrench - 5/6” (25.4mm) 1(0.45 kg)
1(0.45 kg)
SSTHEX Extender Handle for T Wrench 2 (0.91 kg)
1(0.45 kg)
SN 2” (50.8mm) Snap Pin

SSDS Deck Screw

SSDSC Deck Screw Clip

SSTS Thumb Screw

SSRS Riser Socket with Hex Nuts

SSROTO Replacement Roto lock w/ bolts & nuts

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 85

STAGING Stage Legs, Feet & Braces SKU Description Wt./ lbs.

• Starter and adjustable legs are drilled in 1” (25.4mm) increments Square Galvanized Starter (Outside) Leg - 1 3/4” (4.44 cm) 1 (0.45 kg)
2 (0.91 kg)
• The foot is non-marring with fine adjustment SS17506 6” (15.2cm) Leg / Stage Ht, 8” (20.3cm) 2 (0.91 kg)
3 (1.36 kg)
• Unique telescopic leg design offers maximum stage adjustment SS17509 9” (22.8cm) / Stage Ht, 11” (27.9cm) 3 (1.36 kg)

• The Quik-Connect brace is held in place with only 2 snap pins SS17512 12” (30.4cm) / Stage Ht, 14” (35.5cm)

• The diagonal brace adds stability to stage deck heights above 24” (60.9cm)

SS17513 13” (33.0cm) / Stage Ht, 15” (38.1cm)

SS17518 18” (45.7cm) / Stage Ht, 20” (50.8cm)

SS17524 24” (60.9cm) / Stage Ht, 26” (66.0cm) 5 (2.26 kg)
SS17530 30” (76.2cm) / Stage Ht, 32” (81.2cm) 6 (2.72 kg)
SS17536 36” (91.4cm) / Stage Ht, 38” (96.5cm) 7 (3.17 kg)

SS17548 48” (121.9cm) / Stage Ht, 50” (127.0cm) 9 (4.08 kg)

Square Galvanized (Inside) Leg - 1 1/2” (3.81cm) Used for adjustments.
6” (15.2cm) must be retained for connection with starter leg.

4’ (1.21m) x4’ (1.21m) Stage SS15012 12” (30.4cm) / adds up to 6” (15.2cm) 2 (0.91 kg)
Deck with Quik-Connect Brace
SS15018 18” (45.7cm) / adds up to 12” (30.4cm) 3 (1.36 kg)

21” (53.3cm) SS15021 21” (53.3cm) / adds up to 15” (38.1cm) 3 (1.36 kg)

SS15024 24” (60.9cm) / adds up to 18” (45.7cm) 4 (1.81 kg)

SS15030 30” (76.2cm) / adds up to 24” (60.9cm) 5 (2.26 kg)

SS15036 36” (91.4cm) / adds up to 30” (76.2cm) 6 (2.72 kg)

13” (33.0cm) SS15048 48” (121.9cm) /adds up to 42” (106.6cm) 7 (3.17 kg)

Non-Maring Adj Base Foot (Snap Pins Included)

SSBFS Short Stem 2 (0.91 kg)

SSBFL Long Stem 3 (1.36 kg)

Quik-Connect Diagonal Braces (Snap Pins Included)

SSBR46SD Starter Brace (gray) - Use on legs with 46” (116.8 8 (3.62 kg)
cm) spacing

1.5” (3.81cm) 1.75” (4.44cm) Foot SSBR48D Continuous Brace (black) Use on legs with 48” 8 (3.62 kg)
(121.9cm) spacing
Inner Leg Starter Leg

Stage Chart for Decks & Legs (Square / Rectangular Staging)

4’ (1.21m) 8’ (2.43m) 12’ (3.65m) 16’ (4.87m) 20’ (6.09m) 24’ (7.31m) 28’ (8.53m) 32’ (9.75m) 36’ (10.9m) 40’ (12.1m) 44’ (13.4m) 48’ (14.6m)

Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs
Decks
Legs

4’ (1.21m) 1 4 2 6 3 8 4 10 5 12 6 14 7 16 8 18 9 20 10 22 11 24 12 39
8’ (2.43m) 2 6 4 9 6 12 8 15 10 18 12 21 14 24 16 27 18 30 20 33 22 36 24 52
12’ (3.65m) 3 8 6 12 9 16 12 20 15 24 18 28 21 32 24 36 27 40 30 44 33 48 36 65
16’ (4.87m) 4 10 8 15 12 20 16 25 20 30 24 35 28 40 32 45 36 50 40 55 44 60 48 78
20’ (6.09m) 5 12 10 18 15 24 20 30 25 36 30 42 35 48 40 54 45 60 50 66 55 72 60 91
24’ (7.31m) 6 14 12 21 18 28 24 35 30 42 36 49 42 56 48 63 54 70 60 77 66 84 72 104
28’ (8.53m) 7 16 14 24 21 32 28 40 35 48 42 56 49 64 56 72 63 80 70 88 77 96 84 117
32’ (9.75m) 8 18 16 27 24 36 32 45 40 54 48 63 56 72 64 81 72 90 80 99 88 108 96 130
36’ (10.9m) 9 20 18 30 27 40 36 50 45 60 54 70 63 80 72 90 81 100 90 110 99 120 108 117
40’ (12.1m) 10 22 20 33 30 44 40 55 50 66 60 77 70 88 80 99 90 110 100 121 111 132 120 143

86 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

Adjustable Stairs STAGING

• Most versatile stair on the market

• Integrated handles and locking feature make the stairs easy to carry and transport

• Stairs fold down to less than 12” (30.4cm) tall for storage

• Code compliant, when used at recommended stage heights

• Handrails included

Adjustable Stairs Wt./ lbs.
132 (59.8 kg)
SKU Description
175 (79.3 kg)
SS3STR1232 3 Step Package w/ Hand Rail
Adjustable from 12” (30.4cm) to 32” (81.2cm) 300 (136.1 kg)

SS5STR2048 5 Step Package w/ Hand Rail Three Step Stair Unit
Adjustable from 20” (50.8cm) to 48” (121.9cm) (SS3STR1232)

SS8STR3272 8 Step Package w/ Hand Rail
Adjustable from 32” (81.2cm) to 72” (182.8cm)

Access Ramp

Due to the unique design of the stage, the use of only a starter deck and connecting deck permits a ramp of any length to be assembled using standard stage decks to

complete it. The angled leg adapter used with regular legs makes this possible. 1” (25.4mm) Rise to 12” (30.4cm) run. (1:12 pitch). Guard rail packages are available.

Access Ramp

SKU Description Wt./ lbs.

SL430SD 4’ (1.21m) x 30” (76.2cm) Access Ramp Starter Deck* 68 (30.8 kg)

SL412CD 4’ (1.21m) x 12” (30.4cm) Access Ramp Connecting Deck* 30 (13.6 kg)

SS175AL 5” (12.7cm) x 1¾” (4.44cm) Angled Leg Adapter 1.5 (0.68 kg)

SSRTH Stage End Hand Rail Section 9 (4.08 kg)

SSRIH Intermediate Hand Rail Section 12 (5.44 kg)

SSRBH Starter Deck End Hand Rail Section 17 (7.7 kg)

SSRHPI Intermediate Side Hand Rail Post 7 (3.17 kg)

SSRHPS Starter End Hand Rail Posts Assembly 16 (7.25 kg)

SSBR48H Horizontal Brace 4’ spacing with U-Bolt 7.5 (3.40 kg)

*Ramp assembly uses standard 4’ (1.21m) x 4’ (1.21m) decks between the connecting
and starter decks. No special 4’ (1.21m) x 4’ (1.21m) decks are needed.

Guard Rails

SKU Description Wt./ lbs.

Guard Rail Panels - 3 Rail Horizontal 19 (8.61 kg)
34 (15.4 kg)
SSGRH34 4’ (1.21m) Horizontal Rails
24 (10.8 kg)
SSGRH38 8’ (2.43m) Horizontal Rails 43 (19.5 kg)

Guard Rail Panels - Half Vertical 5 (2.26 kg)
3 (1.36 kg)
SSGRVH4 4’ (1.21m) Half Vertical 1 (0.45 kg)

SSGRVH8 8’ (2.43m) Half Vertical

Mounting Brackets

SSSDS Side Double Socket Bracket (Inc U-Bolt)

SSCOS Corner Offset Socket Bracket (Inc U-Bolt)

SSCIS Corner In Line Socket Bracket

3 Rail Horizontal Half Vertical SSSDS SSCOS SSCIS PRICING AVAILABLE AT WWW.GETTENT.CO.UK 87

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041

SPIRAL DUCTING SPIRAL DUCTING

Spiral Ducting from Celina is crafted to your exact needs; from your choice of base materials to the myriad end connecting options, your order can be specially
modified to fit the purpose of your choice. Celina’s experience in bonding fabrics gives us the advantage of a warehouse full of optional materials for duct fabrication
for Miliary and industrial use.

Materials used to create ducting are held to the same flame resistance specifications that are required of
fabric structures used by or around individuals. Flame resistance does NOT mean that fabrics are flame
proof; always keep any fabrics away from open flame.

In addition to stock materials, ducting created with insulation is also available. We offer both aeroplast
insulation and industry-standard batting insulation to provide the ducts with advanced environmental control
abilities. Insulated ducting is great for ECU systems, as it resists external environmental interference. Most
materials are block-out fabrics, which don’t allow errant light to escape the ducts or structures. The degree
of light suppression is high enough to prevent detection even when night vision goggles are used. The con-
nections between ducting and ECU’s or shelters need to be particularly inspected for this to be achieved.

Military Materials: Additional Materials:
• MILPRF-20696 (Tan/Green) • MIL-20696
• MILPRF-44103 (Black/Tan) • 20696 - Tan
• MILPRF-44103 (Black/Green) • 20696 - Green
• MILPRF-44103 (Infrashield) • V1650 - 16 oz. Block-Out White
• MSHA Yellow (2 weights) • Bondcote Bondbarrier
• CBRNE-Approved Fabrics • And more!
• Laminated PVC’s
• Coated PVC’s

Wear Strip Wear Strips
In order to combat everyday wear and tear associated with the most common failure points, wear strips,
also known as scuff strips, can be added to the ducting to protect the areas where the internal wire may
cause additional duct wall damage. Wear stripping is attached to the outside of the ducts during the
manufacturing process and is available in widths of .75” (19mm), 1” (25.4mm), and 1.25” (31.7mm). Wear
stripping is optional, and can be left off of the final product if desired.

Widths
Having chosen the base materials to create the duct, tubing diameter is chosen. To aid in customization
of all spiral ducting, we offer tubing from 2” (50.8mm) to 48” (121.9cm) in diameter, with intermediate
diameters available in 2” (50.8mm) increments.

Pitch
Further customization of the ducting can include the pitch of the internal reinforcement wire; the pitch of
the wire refers to the distance between corresponding areas on two loops in the wire. We offer standard
pitches of 2” (50.8mm), 4” (101.6mm), and 6” (152.4mm). Tighter pitch grants more duct strength, but
imposes greater rigidity. Larger pitch allows the tubing to move more freely, with less reinforcement per
distance of tubing.

Finishing
Each end of the manufactured duct can be finished with any of our connectors/finishing methods:
• Belt Cuff- a strip of fabric is incorporated into the cuff, equipped with an alligator clip fastener
• Soft Cuff - a fabric extension is added to the end without support wire
• Velcro Cuff - Loop is sewn around the cuff of one duct end, with a hook flap attached to the connecting
end of the next duct; the hook flap wraps around the loop end
• Screw Clamp Cuff - a built in steel band with a screw clamp for easy tightening
• Wire Rope Coupling - ends of the ducting have a wire ring incorporated into the fabric, which is inserted
into a ducting end with the same finish – coupling assemblies are used to secure the two rings together
• Rigid Coupling - a solid internal metal hoop is attached to the end, allowing the attachment of Belt or
Screw Cuffs, which required a solid base for connection
• Zipper Cuff - corresponding sides of a zipper are sewn to the ends ducting intended to connect

Due to the manufacturing process, air flow within spiral
ducting is required to flow in one specific direction. Keep
this in mind when choosing your finish for each end, to en-
sure that when installed air flows in the proper direction.

AmBeEnRdRmYent WWW.CELINAINDUSTRIES.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT

88 PRICING AVAILABLE AT WWW.GETTENT.COM

Box Style Heaters CLIMATE CONTROL

• Thermostatically controlled for a consistent, comfortable environment

• Operates as both fresh air circulator or a heater at the touch of a switch

• Easily converts from propane to natural gas

• Duct options for all tent and party applications

• Direct spark ignition system Use your
• 20’ (6.1m) Cord for remote location tents
• 115V/60Hz/1PH/15Amp power requirement
• Super quiet, super efficient year round!

• Easy to setup

• Rugged design

SKU Description Wt./ lbs. Heater Diffuser Duct Diffuser 10’ (3.04 m) Flexible Duct
THC85P 85,000 BTU Heater, LP (Propane) 135 (61.2 kg)
THC175P 175,000 BTU Heater, LP (Propane) 177 (80.2 kg)
THC85N 85,000 BTU Heater, NG (Natural Gas) 135 (61.2 kg)
THC175N 175,000 BTU Heater, NG (Natural Gas) 177 (80.2 kg)

Model THC85 THC175
BTU/hr 85,000 175,000
Heated Air Output 450 CFM 1,200 CFM
LxWxH 30” x 16” x 22” 30.6” x 18.25” x 31.125”

Replacement Parts Accessories

SKU Description Wt./ lbs.
15 (6.80 kg)
THCPWD12 Duct - White 12’ (3.7m) x 12” (304.8mm) 2 (0.91 kg)
25 (11.3 kg)
THCPDA12 Duct Adaptor* 25 (11.3 kg)
25 (11.3 kg)
THCPDD Duct Diffuser (All THC Series)
-
THCPHD85 Heat Diffuser THC85 -
-
THCPHD175 Heat Diffuser THC175

THCPTH Thermostat

THCPHK85 15’ (4.57m) x 1/2” (12.7mm) Hose & 2nd Stage Regulator Kit THC85

THCPHK175 15’ (4.57m) x 1/2” (12.7mm) Hose & 2nd Stage Regulator Kit THC175

*Included when purchasing complete replacement duct. (Replacement adapter)

Propane Tank Manifold Pounds of Maximum Continuous BTU Output
Propane In Per Hour at Various Temperatures
• For multiple tank connections, use the propane tank manifold to connect several Cylinder
0oF 20oF 40oF
propane tanks to any heater.

100 113,000 167,000 214,000

90 104,000 152,000 200,000 100 lb.

80 94,000 137,000 180,000 (45.3kg)

70 83,000 122,000 160,000 40 lb.

60 75,000 109,000 140,000 (18.1kg)

50 64,000 94,000 125,000 20 lb.

40 55,000 79,000 105,000 (9.07kg)

30 45,000 66,000 85,000

20 36,000 51,000 68,000

10 28,000 38,000 49,000

To figure out the amount of heat required for a job site

1. Figure cubic square feet of space to be heated.
Length x width x height
Example: 50’ long x 30’ wide x 15’ high = 22,500
Cubic square feet of space.

2. What is the average temperature outside? This is a guess
by the customer.
Example: outside temp is 15 degrees

30” (76.2cm) 48” (121.9cm) 3. What does the customer want the temperature to be in the building?
Rubber Hose Rubber Hose Example: 55 degrees
4. The heat rise is 55 degrees - inside
1630RU 1648RU -15 degrees - outside
.80 lbs. (0.36 kg) 1 lbs. (0.45 kg)
40 degrees

T-Block 5. Multiply the cubic square foot by the heat rise.
P400 22,500 x 40 degrees = 900,000
6. Multiply by .133
.80 lbs. (0.36 kg) .133 x 900,000 = 119,000 or approx. 120,000
BTU/HR needed to heat the building.

CELINA TENT EUROPE LTD. / WWW.GETTENT.CO.UK / +44 115 794 0041 PRICING AVAILABLE AT WWW.GETTENT.CO.UK 89

CLIMATE CONTROL Portable Air Conditioning Units Wt./ lbs. Military
475 (215.4 kg) Industrial
SKU Description 1,350 (612.3 kg)
MOB42HP 42,000 BTU A/C Unit w/ Heat Pump 3,200 (1451.4 kg) MOB42HP

MOB100S 125,000 BTU A/C Only, Skid Mounted Unit Commercial

MOB250S 290,000 BTU A/C Only, Skid Mounted Unit

MOB42HP
• All-in-one services for air conditioning, area cooling,
dehumidifying, or portable heating needs
• Completely self-contained and portable
• Provides 42,000 Btu/h of cooling and 40,000 Btu/h of heating
• UL listed for outdoor use and runs on 230V, single phase power

MOB100
• Designed for large-area cooling applications
• High-performance portable unit capable of handling up to 126,000 Btu/h
• Can supplement an HVAC system during routine shutdowns
• Provides cost-effective emergency backup cooling
• Skid mounted unit

MOB100

MOB250

MOB250
• Designed for large-area cooling applications
• High-performance portable air conditioning unit capable of handling up to 290,000 Btu/h
• Can supplement an HVAC system during routine shutdowns
• Provides cost-effective emergency backup cooling
• Skid mounted unit

Wisperkool

Wisperkool HVAC equipment is offered in 3 sizes to fit your individual heating and cooling needs. Vertical style units are typically used through the wall tent applica-
tions. The standard bi-directional “free blow” grille arrangement distributes the air inside the tent. Optional duct adaptors extend the versatility of the units for other
applications or where the tent application must be ducted. Other applications include manufacturing processes or temporary spot cooling / heating.

WK20TPV

• 20 Ton Portable Vertical Air-Conditioning and Heating System
• Heavy duty bolted steel construction
• Hot dipped galvanized base with tie-down points
• Aluminum exterior panels and powder-coated aluminum
• Measurements 35” (88.9cm) Deep, 92” (2.3m) Long, 94-7/16” (2.4m) Tall

WK30TPV
• 30 Ton Portable Vertical Air-Conditioning and Heating System
• Heavy duty bolted steel construction
• Hot dipped galvanized base with tie-down points
• Aluminum exterior panels and powder-coated aluminum
• Measurements 48” (1.2m) Deep, 93” (2.3m) Long, 96” (2.4m) Tall

SKU Description Wt./ lbs.
WK20TPV
WK30TPV Wisperkool 20 Ton HVAC 2,200 (997.9 kg)

Wisperkool 30 Ton HVAC 3,200 (1451.4 kg)

90 PRICING AVAILABLE AT WWW.GETTENT.COM CELINA TENT INC. / WWW.GETTENT.COM / 1.866.GET.TENT