ABB Semiconductor Mounting Clamps 2021

—
Semiconductor mounting clamps
Product catalog 2021

—
Table of contents

003 Product range overview
004 – 033 Mounting clamps,
Aluminium/Steel
034 Pressure pad insulator
035 – 039 Aluminium reaction bars
040 Cleaning kit
041 Thyristor tester
042 – 043 Worldwide distributors

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 3

—
Semiconductor mounting clamps
Product range overview

Selection guide Steel Clamping force
Mounting clamp
Aluminium

Bolt distance

Recommended
for device
flange diameter

Type Page mm mm kN 4 8 10 11 12 15 16 20 22 33 40 50 70 •• • • •90 110 135 190

5SAC29V 4–5 172–197 290 A •• • •• • ••• • •• •• •• ••
• •• • • • •
5SAC22V 6–7 150–172 220 A

5SAC18V 8–11 60–150 180 A

5SAC15V 12–13 75–120 146 A

5SAC14V 14–19 60–110 140 A

5SAC13V 20 40–118 132 S

5SAC10V 22–25 60–75 102 A S
S
5SAC10V 26–27 42–75 102 S
S
5SAC09V 28–29 60 85

5SAC07V 30–31 60 70

5SAC05V 32–33 42 54

Please find in the right column a quick guide explaining the composition Standard part number 5SAC 18V9020
of the standard ABB part numbers for mounting clamps. 5S – Original drawing responsible, CHSEM
A – Acessories
An example of adapted standard part number is 5SAC 1890V0001, C – Clamp
where the number 90 has changed place when compared to the standard 18 – approximately 18 cm bolt distance
part number. V – Mechanical version
90 – 90 kN of spring force
20 – Version number

Technical Specification – Environmental

Ambient temperature -40°C to +70°C
Transport -5°C to +40°C
Storage -5°C to +80°C
Operation

Relative humidity 5% to 85%,
No condensation allowed

Contamination levels No conductive dust allowed

Storage IEC60721-3-1
Class 1C2 (chemical gases)
Class 1S2 (solid particles)

Transportation IEC60721-3-2
Class 2C2 (chemical gases)
Class 2S2 (solid particles)

Operation IEC60721-3-3

(Assembled) Class 3C2 (chemical gases)
Class 3S2 (solid particles)

4 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC29V: 110 and 190 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter 172 to 197 mm clamping force • Not sensitive to magnetic fields
5SAC29V1120 110 and 190 kN, in alloy EN-AW-6082-T6. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
1. Leaf spring with • Clamping force up to 110 and 190 kN
correct clamping • (-10%, +20%)
force indicator and • ABB’s correct clamping force indicator
pressure pad.
2. Washers
3. Label

5SAC29V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC29V1120 02
5SAC29V1920 force insulation for partial for cont.

voltage discharge operation

mm mm kg kN kV kV °C

– 290 3.6 110 – – 80

– 290 5.1 190 – – 80

— 70
01
1
Ø20.5 3
2
(108)
(55) 110 kN

(82.5) 82

290
346

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 5

—
Aluminium mounting clamp
5SAC29V: 110 and 190 kN

— PRODUCT SPECIFICATIONS Washers
Figure 02 Leaf spring Material: Aluminium EN-AW-6082
5SAC29V1920 Material: Aluminium EN-AW-6082 Surface treatment: Anodized nature (10μm)
Surface treatment: Anodized nature (10μm)
Each part number Environmental
includes: Indicating spring IEC60721-3-3 set IE33, Class 3C1
1. Leaf spring with Material: EN-AW-6005 Relative humidity 5 to 85%, no condensation
correct clamping Surface treatment: Anodized nature (10μm) allowed.
force indicator and
pressure pad. Press piece
2. Washers Material: Aluminium EN-AW-6082
3. Label Surface treatment: Anodized nature (10μm)

— 1 100
02 97
3
Ø20.5
2
(108) 190 kN
(55)

(82.5)
290
346

(mm)

6 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC22V: 90 and 135 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter 150 to 172 mm clamping force • Not sensitive to magnetic fields
5SAC22V9020 90 and 135 kN, in alloy EN-AW-6082-T6. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
1. Leaf spring with • Clamping force up to 90 and 135 kN
correct clamping
force indicator (-10%, +20%)
and pressure pad. • ABB’s correct clamping force indicator
2. Washers
3. Label

5SAC22V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Clamping Max. Voltage Max. temp
Length Distance force insulation for partial for cont. 01
5SAC22V9020 voltage discharge operation 02
5SAC22V1320 mm mm kg kN kV kV °C
– 220 2.00 90
– 220 2.74 135 – – 80

– – 80

—
01

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 7

—
Aluminium mounting clamp
5SAC22V: 90 and 135 kN

— PRODUCT SPECIFICATIONS Washers
Figure 02 Leaf spring Material: Aluminium EN-AW-6082
5SAC22V1320 Material: Aluminium EN-AW-6082 Surface treatment: Anodized nature (10μm)
Surface treatment: Anodized nature (10μm)
Each part number Environmental
includes: Indicating spring IEC60721-3-3 set IE33, Class 3C1
1. Leaf spring with Material: EN-AW-6005 Relative humidity 5 to 85%, no condensation
correct clamping Surface treatment: Anodized nature (10μm) allowed.
force indicator
and pressure pad. Press piece
2. Washers Material: Aluminium EN-AW-6082
3. Label Surface treatment: Anodized nature (10μm).

— 1 100
02 97
3
Ø20.5
2
(108) 190 kN
(55)

(82.5)
290
346

(mm)

8 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC18V: 50, 70 and 90 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter 100 to 150 mm, mounting force • Not sensitive to magnetic fields
5SAC18V5020 50 to 90 kN in alloy EN-AW-6082-T6. • Low weight
5SAC18V7020 • High alloy content makes clamp exceptionally
5SAC18V9020
strong
Each part number • Clamping force 50, 70 and 90 kN (-10%, +20%)
includes: • ABB’s correct clamping force indicator
Leaf spring with
correct clamping
force indicator,
spring support,
washers (M16)
item 1 and 2 and
label item 3.

5SAC18V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Clamping Max. Voltage Max. temp
Length Distance force insulation for partial for cont. 01
5SAC18V5020 voltage discharge operation 01
5SAC18V7020 mm mm kg kN kV kV °C 01
5SAC18V9020 – 180 1.26 50 – – 80 02
5SAC18V5021 – 180 1.26 70 – – 80 02
5SAC18V7021 – 180 1.26 90 – – 80 02
5SAC18V9021 – 180 1.38 50 7.0 > 7.0 80 03
5SAC18V5022 – 180 1.38 70 7.0 > 7.0 80 03
5SAC18V7022 – 180 1.38 90 7.0 > 7.0 80 03
5SAC18V9022 – 180 1.55 50 7.0 > 7.0 80
– 180 1.55 70 7.0 > 7.0 80
– 180 1.55 90 7.0 > 7.0 80

—
01

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 9

—
Aluminium mounting clamp
5SAC18V: 50, 70 and 90 kN

— —
Figure 02 02
5SAC18V5021
5SAC18V7021 (mm)
5SAC18V9021 —
03
Each part number
includes:
Leaf spring with
correct clamping
force indicator,
spring support,
washers (M16)
item 1 and 2 and
label item 3.
2. Pressure pad
insulator item 4.

—
Figure 03
5SAC18V5022
5SAC18V7022
5SAC18V9022

Each part number
includes:
Leaf spring with
correct clamping
force indicator,
spring support,
washers (M16)
item 1 and 2 and
label item 3.
2. Pressure pad
insulator item 4.
3. Bolt insulators
item 5 and 6.

(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M12 property class 8.8 (DIN 931) –
Bolt Coated or stainless steel 17 x 45 x 3 –
Plain washer

10 S E M I C O N D U C T O R M O U N T I N G C L A M P S P R O D U C T C ATA LO G 2 0 21

—
Aluminium mounting clamp
5SAC18V: 20 and 40 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 150 mm, mounting force • Not sensitive to magnetic fields
5SAC18V2011 20 to 40 kN in alloy EN-AW-6882-T6. • Low weight
5SAC18V4011 • High alloy content makes clamp exceptionally

Each part number strong
includes: • Clamping force 20 and 40 kN (-10%, +20%)
• Leaf spring with • ABB’s correct clamping force indicator
correct clamping
force indicator.
• Pressure pad.

5SAC18V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Clamping Max. Voltage Max. temp
Length Distance force insulation for partial for cont. 01
5SAC18V2011 voltage discharge operation 01
5SAC18V4011 mm mm kg kN kV kV °C
Insulators – 180 0.44 20
2744010-3 – 180 0.44 40 – – 80
5FSE704857V1001
– – 80
—
01 –– 0.11 – 7.0 > 7.0 80 02

–– 0.11 – 7.0 > 7.0 80 03

180

180

62 59 Ø60

Ø11 (2x) Ø60 Max 1.5
Ø11 (2x) 222
4 38
38(mm) 222

ABB
Made in Sweden
5SAC 18V4011 40 kN
ABB Logistics Center
Made in Sweden
5SAC 18V2010 20 kN

4

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 11

—
Aluminium mounting clamp
5SAC18V: 20 and 40 kN

— — 3 Ø60.2 ±0.08
Figure 02 02 0.1 A
2744010-3 25.5
(mm)8 4
Pressure pad insulator —
03
—
Figure 03
5FSE704857V1001

Pressure pad insulator

38 ±1 0.1 not convex

Ø58
Ø74
Ø95

Ø3.3 -0.2
Ø4.8 ±0.1

(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M10 property class 8.8 (DIN 931) –
Bolt (11–20 kN) Coated or stainless steel M10 property class 10.9 (DIN 931) –
Bolt (40 kN) Coated or stainless steel 10.5 x 23 x 2 –
Plain washer Coated or stainless steel 10.5 x 23 x 2.5 (DIN 6796) –
Disc washer

12 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC15V: 20, 22, 33, 40, 50 and 70 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 120 mm, mounting force • Not sensitive to magnetic fields
5SAC15V2010 20 to 70 kN. • Low weight
5SAC15V2210 • High alloy content makes clamp exceptionally
5SAC15V3310
5SAC15V4010 strong
5SAC15V5010 • Clamping force 20, 22, 33, 40, 50 and 70 kN
5SAC15V7010
(-10%, +20%)
Each part number • ABB’s correct clamping force indicator
includes:
• Leaf spring with
correct clamping
force indicator.
• Pressure pad

5SAC15V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Distance Clamping Max. Voltage Max. temp
Length force 01
5SAC15V2010 01
5SAC15V2210 kN insulation for partial for cont. 01
5SAC15V3310 20 voltage discharge operation 01
5SAC15V4010 22 01
5SAC15V5010 mm mm kg 33 kV kV °C 01
5SAC15V7010 – 146 0.57 40 02
5SAC15V2001 – 146 0.57 50 – – 80 02
5SAC15V2201 – 146 0.57 70 02
5SAC15V3301 – 146 0.57 20 – – 80 02
5SAC15V4001 – 146 0.57 22 02
5SAC15V5001 – 146 0.57 33 – – 80 02
5SAC15V7001 – 146 0.69 40 03
5SAC15V2002 – 146 0.69 50 – – 80 03
5SAC15V2202 – 146 0.69 70 03
5SAC15V3302 – 146 0.69 20 – – 80 03
5SAC15V4002 – 146 0.69 22 03
5SAC15V5002 – 146 0.69 33 – – 80 03
5SAC15V7002 – 146 0.81 40
– 146 0.81 50 7.0 > 7.0 80
– 146 0.81 70
– 146 0.81 7.0 > 7.0 80
– 146 0.81
– 146 0.81 7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

7.0 > 7.0 80

146

— 146
01

53 53

Ø60
Ø60

186
186

Ø14 (2x)
Ø14 (2x)

40 40 ABB Logistics Center 51.5 51.5
Made in Sweden
5ASBABCLo1g5iVs.t.i1c0s C..eknNter
Made in Sweden
5SAC 15V..10 .. kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 13

—
Aluminium mounting clamp
5SAC15V: 20, 22, 33, 40, 50 and 70 kN

— 146
Figure 02
5SAC15V2001 — 146
5SAC15V2201 02
5SAC15V3301
5SAC15V4001 Ø4.8 38 38
5SAC15V5001 61 61
5SAC15V7001 ØØ34..38
Ø14 (2x) Ø58
Each part number Ø14 (2x)
includes: Ø3.3
• Leaf spring with 40 40 ØØ9585 51.5 51.5
correct clamping Ø95
force indicator.
• Pressure pad 186
• Pressure pad
insulator 186

— ABB AB
Figure 03 Made in Sweden
5SAC15V2002 5SAC 15V..01 .. kN
5SAC15V2202 ABB Logistics Center
5SAC15V3302 Made in Sweden
5SAC15V4002 5SAC 15V..01 .. kN
5SAC15V5002
5SAC15V7002 (mm)

Each part number 146
includes:
• Leaf spring with — 146
correct clamping 03
force indicator.
• Pressure pad 118.5 38 38
• Pressure pad 97 68 68
insulator
• Bolt insulators
• Plain washers
• Disc washers

118.5 Ø25
97 Ø4.8

Ø25 Ø3.3 Ø16.2
Ø58 Ø4.8 Ø16.2

Ø30 Ø95 Ø3.3
Ø58

Ø30 Ø95

186

186

40 40 ABB AB 51.5 51.5
(mm) Made in Sweden
5SAC 15V..02 .. kN
Environmental
IEC60721-3-3 set IE33, Class 3C1. ABB Logistics Center
Relative humidity 5 to 85%, no condensation allowed. Made in Sweden
5SAC 15V..02 .. kN

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M12 property class 8.8 (DIN 931) –
Bolt Coated or stainless steel 13 x 34 x 3 Fig. 03
Plain washer Coated or stainless steel 13 x 29 x 3 (DIN 6796) Fig. 03
Disc washer

14 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC14V33: 33 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 110 mm, mounting force • Not sensitive to magnetic fields
5SAC14V3310 33 kN. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
• Leaf spring with • Clamping force 33 kN (-10%, +20%)
correct clamping • ABB’s correct clamping force indicator
force indicator
and pressure pad.

5SAC14V33 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC14V3310 02
5SAC14V3300 force insulation for partial for cont. 03
5SAC14V3301
voltage discharge operation

mm mm kg kN kV kV °C

– 140 0.53 33 – – 80

– 140 0.63 33 – – 80

140 140 0.85 33 4.8 > 4.8 80

— 140
01

51Ø60
39
165
4
30 Ø11 (2x) Max 1.5

ABB AB
Made in Sweden

5SAC 14V3310 33kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 15

— Included in products
Aluminium mounting clamp Fig. 03
5SAC14V33: 33 kN Fig. 03
Fig. 03
— — 140
Figure 02 02 140
5SAC14V3300
— 47
Each part number 03 59
includes:
• Leaf spring with Ø4.8 66 47
correct clamping Ø58 59
force indicator Ø95
and pressure pad.
• Pressure pad Ø4.8
insulator Ø58
Ø95
— 165
Figure 03
5SAC14V3301 Ø11 (2x) 165

Each part number Ø11 (2x) Max 1.5
includes: Max 1.5
• Leaf spring with ABB AB
correct clamping 30 30 (mm) Made in Sweden
force indicator 44 5SAC 14V3300 33kN
and pressure pad.
• Pressure pad ABB Logistics Center
insulator Made in Sweden
• Bolts (M10x140) 5SAC 14V3300 33kN
• Bolt insulators
• Plain washers 140
• Disc washers 140

107 107 Ø4.8 66
88 88 Ø58 Ø4.8 51 51
ØØ9558 59 59
Ø95
Ø15.Ø515.5

33 33

165 M10
165 M10

ABB AB Max 1.5
Made in Sweden Max 1.5
A5SBABCLo1g4iVs3tic3s01Ce3n3tekrN
30 30 Made in Sweden
44 5SAC 14V3301 33 kN

(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm
Piece part Coated or stainless steel M10 property class 8.8 (DIN 931)
Bolt Coated or stainless steel 10.5 x 25 x 2
Plain washer Coated or stainless steel 10.5 x 23 x 2.5 (DIN 6796)
Disc washer

16 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC14V20: 20 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 110 mm, mounting force • Not sensitive to magnetic fields
5SAC14V2010 20 kN. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
• Leaf spring with • Clamping force 20 kN (-10%, +20%)
correct clamping • ABB’s correct clamping force indicator
force indicator
and pressure pad.

5SAC14V20 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC14V2010 02
5SAC14V2000 force insulation for partial for cont. 03
5SAC14V2001
voltage discharge operation

mm mm kg kN kV kV °C

– 140 0.34 20 – – 80

– 140 0.38 20 – – 80

140 140 0.60 20 4.8 > 4.8 80

— 140

01

5026.4
38165

4 Ø11 (2x) Max 1.5
30
ABB AB
Made in Sweden
5SAC 14V2010 20kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 17

— Included in products
Aluminium mounting clamp Fig. 03
5SAC14V20: 20 kN Fig. 03
Fig. 03
— 140
Figure 02
5SAC14V2000 — 140
02
Each part number
includes: Ø4.8 22
• Leaf spring with Ø38 54.5 54.5
correct clamping Ø100 Ø4.8
force indicator Ø11 (2x) Ø38 Max 1.5
and pressure pad. Ø11 (2x) Ø100 Max 1.5
• Pressure pad
insulator 30 30 (mm) 165
44
— 165
Figure 03
5SAC14V2001 ABB AB
Made in Sweden
Each part number 5SAC 14V2000 20kN
includes: ABB Logistics Center
• Leaf spring with Made in Sweden
correct clamping 5SAC 14V2000 20kN
force indicator
and pressure pad. 140
• Pressure pad 140
insulator
• Bolts (M10x140)
• Bolt insulators
• Plain washers
• Disc washers

—
03

107 107 Ø4.8 22
88 88 Ø38 Ø4.8 47 47
ØØ13080 54 54
Ø100
Ø15.5Ø15.5

33 33

165 M10
165 M10

Max 1.5
Max 1.5

4 30 30 ABB AB
Made in Sweden

5SAC 14V2001 20 kN
ABB Logistics Center
Made in Sweden

5SAC 14V2001 20 kN

(mm)4

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm
Piece part Coated or stainless steel M10 property class 8.8 (DIN 931)
Bolt Coated or stainless steel 10.5 x 25 x 2
Plain washer Coated or stainless steel 10.5 x 23 x 2.5 (DIN 6796)
Disc washer

18 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC14V10: 10 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 110 mm, mounting force • Not sensitive to magnetic fields
5SAC 14V1010 10 kN. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
• Leaf spring with • Clamping force 10 kN (-10%, +20%)
correct clamping • ABB’s correct clamping force indicator
force indicator
and pressure pad.

5SAC14V10 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC 14V1010 02
5SAC 14V1000 force insulation for partial for cont. 03
5SAC 14V1001
voltage discharge operation

mm mm kg kN kV kV °C

– 140 0.31 10 – – 80

– 140 0.35 10 – – 80

140 140 0.57 10 4.8 > 4.8 80

— 140
01

5026.4
38165

4 Ø11 (2x) Max 1.5
27
ABB AB
Made in Sweden
5SAC 14V1010 10kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 19

— Included in products
Aluminium mounting clamp Fig. 03
5SAC14V10: 10 kN Fig. 03
Fig. 03
— 140
Figure 02
5SAC 14V1000 — 140
02
Each part number
includes: Ø4.8 22
• Leaf spring with Ø38 Ø4.8 54.5 54.5
correct clamping ØØ13080
force indicator Ø100
and pressure pad.
• Pressure pad 165
insulator 165

— Ø11 (2x) Max 1.5
Figure 03 Ø11 (2x) Max 1.5
5SAC 14V1001
30 30 ABB AB
Each part number 4 Made in Sweden
includes:
• Leaf spring with 5ASBABCLo1g4iVs1tic0s00Ce1n0tekrN
correct clamping Made in Sweden
force indicator
and pressure pad. 5SAC 14V1000 10kN
• Pressure pad
insulator 4
• Bolts (M10x140)
• Bolt insulators (mm)
• Plain washers
• Disc washers 140
140
—
03

107 107 Ø4.8 22
88 88 Ø38 Ø4.8 47 47
ØØ13080 54 54
Ø100
Ø15.5Ø15.5

33 33

165 M10
165 M10

Max 1.5
Max 1.5

30 30 ABB AB
Made in Sweden

A5SBABCLo1g4iVs1tic0s01Ce1n0tekrN
Made in Sweden

5SAC 14V1001 10 kN

44
(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm
Piece part Coated or stainless steel M10 property class 8.8 (DIN 931)
Bolt Coated or stainless steel 10.5 x 25 x 2
Plain washer Coated or stainless steel 10.5 x 23 x 2.5 (DIN 6796)
Disc washer

20 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 21

—
Steel mounting clamp
5SAC13V5000: 40 and 50 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter 100 to 120 mm, mounting force • Corrosion resistant
5SAC13V5000 40 and 50 kN. • Clamping force 40 and 50 kN (-10%, +20%)
• ABB’s correct clamping force indicator
Each part number Designed for the ABB Air Cooled Heat sink
includes: 5SAA21V3500 (YAP8-03).
• Leaf spring
• Correct clamping
force indicator
• Reaction bar
• Insulator
• Bolts (M10x140)
• Spring washers

5SAC13V5000 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp 01
Length Distance Clamping
5SAC13V5000
— force insulation for partial for cont.
01
voltage discharge operation

mm mm kg kN kV kV °C
– 1.8 40, 50
132 5.4 > 5.4 125

132

132

M10 ~1.8 ~1.8 Ø3
M10 Ø3
Ø15
Ø15 45
45 ~78
Ø16.5
Ø16.5 ~78~192
~192

67
67

25 2.5 2.5 158

ABB AB 158 40 kN USE GREASE
Made in Sweden
5SAC 13V5000 50 kN CAUUTSIOENG!R!!EASE
40
ABB Logistics Center kN
Made in Sweden
2.5 2.5 25 5SAC 13V5000 50 kN CAUTION !!!

(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M10 property class 10.9 (DIN 931) Fig. 01
Bolt Coated or stainless steel 17 x 45 x 3 Fig. 01
Spring washer

22 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC10V22: 22 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 75 mm, mounting force • Not sensitive to magnetic fields
5SAC10V2210 22 kN. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
• Leaf spring with • Clamping force 22 kN (-10%, +20%)
correct clamping • ABB’s correct clamping force indicator
force indicator.
• Pressure pad

5SAC10V22 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC10V2210 02
5SAC10V2200 force insulation for partial for cont. 03
5SAC10V2201
voltage discharge operation

mm mm kg kN kV kV °C

– 102 0.20 22 – – 80

– 102 0.21 22 4.8 > 4.8 80

– 102 0.32 22 4.8 > 4.8 80

— 102

01

38 Ø35
3 128

25Ø9 (2x)Max 1.5
37.5
ABB AB
Made in Sweden
5SAC 10V2210 22 kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 23

— Included in products
Aluminium mounting clamp Fig. 03
5SAC10V22: 22 kN Fig. 03
Fig. 03
— 102
Figure 02 — 102
5SAC10V2200 02

Each part number Ø3 1.8 1.8
includes: Ø41 29 29
• Leaf spring with Ø50 Ø3 41 41
correct clamping Ø41
force indicator Ø9 (2x) Ø50 Max 1.5
and pressure pad. Ø9 (2x) Max 1.5
• Pressure pad 128
insulator
128
—
Figure 03 38 38 ABB AB
5SAC10V2201 Made in Sweden
5SAC 10V2200 22 kN
Each part number
includes: ABB Logistics Center
• Leaf spring with Made in Sweden
correct clamping 5SAC 10V2200 22 kN
force indicator
and pressure pad. (mm)33
• Pressure pad
insulator — 102
• Bolts (M8x100) 03 102
• Bolt insulators
• Plain washers
• Disc washers

68 68 Ø3 1.8 1.8
55 55 33 33
Ø41 Ø3 41 41
Ø13 ØØ5401
Ø13
Ø50

32 32 M8
M8
128 Max 1.5
Max 1.5
128
38 38
ABB AB
Made in Sweden
5SAC 10V2201 22 kN
ABB Logistics Center
Made in Sweden
5SAC 10V2201 22 kN

Environmental 33 (mm)

IEC60721-3-3 set IE33, Class 3C1.

Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm
Piece part Coated or stainless steel
Bolt Coated or stainless steel 8.4 x 20 x 2
Plain washer Coated or stainless steel 8.4 x 18 x 2 (DIN 6796)
Disc washer

24 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium mounting clamp
5SAC10V10: 10 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 75 mm, mounting force • Not sensitive to magnetic fields
5SAC10V1010 10 kN. • Low weight
• High alloy content makes clamp exceptionally
Each part number
includes: strong
• Leaf spring with • Clamping force 10 kN (-10%, +20%)
correct clamping • ABB’s correct clamping force indicator
force indicator
and pressure pad.
• Pressure pad

5SAC10V10 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC10V1010 02
5SAC10V1000 force insulation for partial for cont. 03
5SAC10V1001
voltage discharge operation

mm mm kg kN kV kV °C

– 102 0.12 10 – – 80

– 102 0.13 10 4.8 > 4.8 80

100 102 0.24 10 4.8 > 4.8 80

— 102

01

3 21 Ø35
25
37.5128

Ø9 (2x) Max 1.5

ABB AB
Made in Sweden
5SAC 10V1010 10 kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 25

—
Aluminium mounting clamp
5SAC10V10: 10 kN

— — 102
Figure 02 02
5SAC10V1000
Ø3 1.8
Each part number Ø41 29
includes: Ø50 41
• Leaf spring with
correct clamping 128
force indicator
and pressure pad. Ø9 (2x) Max 1.5
• Pressure pad
insulator 3 21 ABB AB
Made in Sweden
— 5SAC 10V1000 10 kN
Figure 03
5SAC10V1001 (mm)

Each part number —
includes: 03
• Leaf spring with
correct clamping
force indicator
and pressure pad.
• Pressure pad
insulator
• Bolts (M8x100)
• Bolt insulators
• Plain washers
• Disc washers

102

68 Ø3 1.8
55 Ø41 33
Ø13 Ø50 41

32

128 M8
Max 1.5
ABB AB
21 Made in Sweden
3 5SAC 10V1001 10 kN

Environmental (mm)

IEC60721-3-3 set IE33, Class 3C1.

Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M8 property class 8.8 (DIN 931) Fig. 03
Bolt Coated or stainless steel 8.4 x 20 x 2 Fig. 03
Plain washer Coated or stainless steel 8.4 x 18 x 2 (DIN 6796) Fig. 03
Disc washer

26 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Steel mounting clamp
5SAC10V16: 4, 8, 12 and 16 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 75 mm, mounting force • Corrosion resistant
5SAC10V1610 4 to 16 kN. • Clamping force 4, 8, 12 and 16 kN (-10%, +20%)
• ABB’s correct clamping force indicator
Each part number
includes:
• Leaf spring
• Correct clamping
force indicator

5SAC10V16 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC10V1610 02
5SAC10V1600 force insulation for partial for cont. 02
5SAC10V1601
voltage discharge operation

mm mm kg kN kV kV °C

– 102 0.09 4, 8, 12, 16 – – 80

110 102 0.40 4, 8, 12, 16 6.5 > 6.5 80

120 102 0.40 4, 8, 12, 16 6.5 > 6.5 80

— 128
01 102

2 21 2 Ø3
~1.5
20
Ø11.5 (2x) 142kN
186kN
ABB AB
Made in Sweden
5SAC 10V1610

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 27

—
Steel mounting clamp
5SAC10V16: 4, 8, 12 and 16 kN

— — 102
Figure 02 02 Ø3
5SAC10V1600
5SAC10V1601 M8

Each part number 2 21 2
includes: ~1.5
• Leaf spring
• Correct clamping
force indicator
• Bolts and nuts
• Bolt insulators
• Plain washers
• Disc washers

A B
39
Ø16

24

Ø28

128

ABB AB 142kN
Made in Sweden 186kN
5SAC 10V16..

(mm)

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M8 property class 8.8 (DIN 931) Fig. 02
Bolt Coated or stainless steel 8.4 x 20 x 2 Fig. 02
Plain washer Coated or stainless steel 8.4 x 18 x 2 (DIN 6796) Fig. 02
Disc washer

28 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Steel mounting clamp
5SAC09V12: 12 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 60 mm, mounting force • Corrosion resistant
5SAC09V1210 12 kN. • Clamping force 12 kN (-10%, +20%)
• ABB’s correct clamping force indicator
Each part number
includes:
• Leaf spring with
correct clamping
force indicator.

5SAC09V12 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC09V1210 02
5SAC09V1200 force insulation for partial for cont. 03
5SAC09V1201
voltage discharge operation

mm mm kg kN kV kV °C

– 85 0.15 12 – – 125

– 85 0.16 12 4.8 > 4.8 125

100 85 0.29 12 4.8 > 4.8 125

— 105
01 85

15

1.5 ±0.2

Ø9.5 (2x)

21 ABB AB
2 5SAC 09V1210 12kN

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 29

—
Steel mounting clamp
5SAC09V12: 12 kN

— — 105
Figure 02 02 85
5SAC09V1200
Ø3 1.8
Each part number Ø41 31
includes: Ø50
• Leaf spring with Ø9.5 (2x)
correct clamping ABB AB
force indicator. 21 5SAC 09V1200 12kN
• Pressure pad 2
• Pressure pad 105
insulator (mm) 85
105
— — 85
Figure 03 03
5SAC09V1201

Each part number
includes:
• Leaf spring with
correct clamping
force indicator.
• Pressure pad
• Pressure pad
insulator
• Bolts (M8x100)
• Bolt insulators
• Disc washers

66.5 66.5 Ø3 1.8 1.8
55 55 Ø41 Ø3 35 35
Ø50
33.5 33.5 Ø41
Ø13 Ø50
Ø13

M8

M8

21 21 ABB AB
2 5SAC 09V1201 12kN
ABB Logistics Center
(mm)2 5SAC 09V1201 12kN

Environmental Dimensions mm
IEC60721-3-3 set IE33, Class 3C1. M8 property class 8.8 (DIN 931)
Relative humidity 5 to 85%, no condensation allowed. 8.4 x 18 x 2 (DIN 6796)

Recommendations for piece parts Material Included in products
Piece part Coated or stainless steel Fig. 03
Bolt Coated or stainless steel Fig. 03
Disc washer

30 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Steel mounting clamp
5SAC07V08: 8 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 60 mm, mounting force • Corrosion resistant
5SAC07V0810 8 kN. • Clamping force 8 kN (-10%, +20%)
• ABB’s correct clamping force indicator
Each part number
includes:
• Leaf spring with
correct clamping
force indicator.
• Washers

—
Figure 02
5SAC07V0800

Each part number
includes:
• Leaf spring with
correct clamping
force indicator.
• Pressure pad

5SAC09V12 Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC07V0810 02
5SAC07V0800 force insulation for partial for cont. 03
5SAC07V0802 04
5SAC07V0803 voltage discharge operation

mm mm kg kN kV kV °C

– 70 0.13 8 – – 125

– 70 0.27 8 – – 125

100 70 0.26 8 2.8 > 2.8 110

70 70 0.36 8 2.8 > 2.8 110

— — 70 25
01 02 Ø9.2 5

70 13 8 10 13

15 20 Ø8.4
1.5 ±0.2 52
Ø3 1.5 ±0.2 Ø3
Ø20 35

90 90

Ø8

ABB AB
5SAC 07V0810 8kN

ABB
5SAC 07V0800 8kN

(mm)

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 31

—
Steel mounting clamp
5SAC07V08: 8 kN

— — 97.2
Figure 03 02 70
5SAC07V0802
13
Each part number
includes: 115.5 Ø3 Ø11
• Leaf spring with 49 Ø20 Ø10
correct clamping
force indicator. 1.5 ±0.2
• Bolts (M8x100)
• Bolt insulators 28.5
• Washers
(mm) M8
—
Figure 04 ABB AB
5SAC07V0803 5SAC 07V0802 8 kN

Each part number
includes:
• Leaf spring with
correct clamping
force indicator.
• Pressure pad
• Pressure pad
insulator
• Bolts (M8x70)
• Bolt insulators
• Washers

— 97.2
70
03 M4 (2x) 25.5

13

94.5 1.5 ±0.2 Ø3 Ø11
85.5 35 Ø10
25
M8
17.5

(mm)

ABB AB
5SAC 07V0803 8 kN

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M8 property class 8.8 (DIN 931) Fig. 03 and 04
Bolt

32 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Steel mounting clamp
5SAC05V: 4 and 8 kN

— Clamping system for hockey-puck devices with Features
Figure 01 flange diameter up to 42 mm, mounting force • Corrosion resistant
5SAC05V0403 4 and 8 kN. • Clamping force 4 and 8 kN (-10%, +20%)
• ABB’s correct clamping force indicator
Each part number
includes:
• Leaf spring with
correct clamping
force indicator
and preassure pad.
• Bolts (M6x45)
• Bolt insulators
• Washers

5SAC05V Bolt Weight Fm Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp
Length Distance Clamping 01
5SAC05V0403 02
5SAC0508V0001 force insulation for partial for cont. 03
5SAC0508V0002
voltage discharge operation

mm mm kg kN kV kV °C

45 54 0.11 4 2.2 > 2.2 110

– 54 0.20 8 2.2 > 2.2 110

– 54 0.20 8 2.2 > 2.3 110

— 74
01 54 13

59.5 Ø3
16 Ø20

13 M6

(mm) ABB AB Ø8
5SAC 05V0403 8 kN

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 33

—
Steel mounting clamp
5SAC05V: 4 and 8 kN

— 79 13
Figure 02 13
5SAC0508V0001 54
— 79 Ø11
Each part number 02 54 Ø11
includes: Ø10
• Leaf spring with 66.5 66.5 1.5 1.5 Ø3 52.5 52.5 Ø10
correct clamping 30 Ø3
force indicator. 13
• Bolt insulators 30 Ø8.2
Ø8.2
— (mm)
Figure 03 ABB AB
5SAC0508V0002 — 5SAC 0508V0001 8 kN
03 ABB Logistics Center
Each part number 5SAC 0508V0001 8 kN
includes:
• Leaf spring with 79
correct clamping 54
force indicator
and pressure pad.
• Bolt insulators

Ø3
Ø11
85.5
49

1.5 ±0.2
71.5

(mm) Ø8.2 Ø10

ABB Logistics Center
5SAC 0508V0002 8 kN

Environmental
IEC60721-3-3 set IE33, Class 3C1.
Relative humidity 5 to 85%, no condensation allowed.

Recommendations for piece parts Material Dimensions mm Included in products
Piece part Coated or stainless steel M6 property class 8.8 (DIN 931) Fig. 01
Bolt

34 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Pressure pad insulator
5FSE704857V1001

5FSE704857V1001 Material Vc Vm Tm Fig.
Type and ordering number Max. Voltage Max. temp 01
insulation
voltage for partial for cont.
kV
discharge operation

kV °C

5FSE704857V1001 Ultrason E2010 G6 7.0 7.0 80

—
Figure 01
5FSE704857V1001

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 35

—
Aluminium reaction bar
5FSE704857-805: 290 mm

PRODUCT SPECIFICATIONS Features
Designed for stack assemblies • Not sensitive to magnetic fields
Material: Aluminium alloy EN-AW-6082 T6 • Low weight
Surface treatment: Anodized nature (10μm)

(82) R2
R2
M20(35)
(65)
20°
11 318 (4x) 9
M20
60 11 290 41
25 (340) 82

(mm)

36 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium reaction bar
5FSE704857-804: 220 mm

PRODUCT SPECIFICATIONS Features
Designed for stack assemblies • Not sensitive to magnetic fields
Material: Aluminium alloy EN-AW-6082 T6 • Low weight
Surface treatment: Anodized nature (10μm)

50 2x45°(2x) 50
2x45°(2x) 25 25

M20(2x)

0.5x45° 4

0.5x45° 72
220 ±0,3

270

2.0(2x)

(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 37

—
Aluminium reaction bar
5FSE704857-801: 180 mm

PRODUCT SPECIFICATIONS Features
Designed for stack assemblies • Not sensitive to magnetic fields
Material: Aluminium alloy EN-AW-6082 T6 • Low weight
Surface treatment: Anodized nature (10μm)

(mm)

38 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Aluminium reaction bar
5FSE704857-802: 146 mm

PRODUCT SPECIFICATIONS Features
Designed for stack assemblies • Not sensitive to magnetic fields
Material: Aluminium alloy EN-AW-6082 T6 • Low weight

40 2x45°(2x) 40
2x45°(2x) 20 20

M12(2x)

0.5x45° 4

0.5x45° 60 146 ±0,3
180

0.5(2x)
(mm)

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 39

—
Aluminium reaction bar
YK2172001-1: 140 mm

PRODUCT SPECIFICATIONS Features
Designed for stack assemblies • Not sensitive to magnetic fields
Material: Aluminium alloy EN-AW-6082 T6 • Low weight

30

2x45° (2x) 30
15
2x45° (2x)

M10 (2x)

0.5x45° 50
Ø4
0.5x45°
0.5 (2x) 140 ±0.3
165

(mm)

40 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Cleaning kit
Silicon oil

Cleaning kits Description Contents Silicon oil
Part number Complete cleaning kit for preparation of semiconductor Cleaning solvent
5FSE70 4857-1 amd heatsink contact surfaces before assembly. 25 ml Abrasive cloth
60 ml Lintfree paper
5FSE70 4857-A Kit for preparation of semiconductor and heatsink contact 1 pc
surface before assembly. For export reasons the cleaning solvent 10 pc Silicon oil
5FSE70 4857-26 is not included. Abrasive cloth
5FSE70 4857-28 Silicon oil 25 ml Lintfree paper
Silicon oil 1 pc
10 pc

25 ml

250 ml

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 41

—
Thyristor tester
YSP 50-01

The thyristor tester type YSP 50-01 meets Features
the need for a compact, portable and low weight Test voltages: VDRM and VRRM up to 5000 V
tool for tests of thyristors and diodes. Test of triggering data

YSP 50-01 Description Type Weight Test voltage Supply voltage
Part number VDRM VRRM
Thyristor tester YSP 50-01 14.5 kg up to 5 kV 220 V / 50 Hz
5FSE 704857-5 Thyristor tester YSP 50-01 14.5 kg 110 V / 60 Hz
5FSE 704857-6 Test fixture YSP 40-01 4.4 kg up to 5 kV –
5FSE 704857-7
10 kV

42 SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021

—
Worldwide distributors

Europe Germany Norway
GvA Leistungselektronik GmbH Hans H. Schive AS
Austria Boehringer Strasse 10 – 12 Undelstadlia 27
ABB AG 68307 Mannheim, Germany 1387 Asker, Norway
Clemens-Holzmeister-Str. 4 Tel.: +49 (621) 789 9210 Tel.: +47 66 760 500
1109 Wien, Austria Fax: +49 (621) 789 9299 Fax: +47 66 904 484
Tel.: +43 (1) 60109 6381 [email protected] [email protected]
Fax: +43 (1) 60109 8600
[email protected] Hungary Romania
Budaker Ltd. SYSCOM 18 SRL
Belgium Fehérvári út 168-178 A. lph. fsz. 3 Calea Plevnei 139B
KWx B.VBA. 1116 Budapest, XI., Hungary 060011 Bucharest, Romania
Prins Boudewijnlaan 30/6 Tel.: +36 1 424 5094 Tel.: +40 21 310 2678
2550 Kontich, Belgium Fax: +36 1 228 2291 Fax: +40 21 316 9176
Tel.: +32 3 450 78 00 [email protected] Mobile: +40 72 251 4939
Fax: +32 3 450 78 05 [email protected]
[email protected] www.kwx.be Italy
ABB S.p.A. Russia
Bulgaria Discrete Automation and Motion ABB Ltd.
SIMEX-TRANS EOOD Division Obrucheva Str. 30/1, Building 2
Trakia, 3 Osvobozdenie Blvd. Via L. Lama 33 117997 Moscow, Russia
Komplex SPS, Floor 3, Office 323 20099 Sesto S. Giovanni (Mi), Italy Tel.: +7 (495) 777 2220
4023 Plovdiv, Bulgaria Tel.: +39 (02) 2414 8494 Fax: +7 (495) 956 6276
Tel./Fax: +359 32 68 28 76 Fax: +39 (02) 2414 3421 [email protected]
Mobile: +359 887 922 669 [email protected]
[email protected] Slovakia
Israel ZTS Eltop, spol. s.r.o.
Czech Republic ABB Technologies Ltd Mierové námestie 24
TUNKR, spol. s.r.o. Topaz Bldg., Shaar Carmel 018 51 Nová Dubnica,
Dlouhá 33 Nahum Het str., 5 Slovenská republika
Pribyslavice 35085 Haifa, Israel Tel.: +421 42 4430031
664 83 Domasov u Brna, Czech Rep. Tel.: +972 (4) 851 9237 Fax: +421 42 4430031
Tel.: +420 603 221 136 Fax: +972 (4) 850 2112 Mobile: +421 905 349742
Fax: +420 546 440 087 [email protected] [email protected]
[email protected] www.ztseltop.sk
Netherlands
France KWx B.V. Spain / Portugal
ABB France Aston Martinlaan 41 Iberica Semiconductores de Potencia S.L.
PP/PS-PPHV NL-3261 NB Oud-Beijerland c/Lugano, 35
16, Rue de l’Equerre - Zl des Bethunes Tel.: +31 186 633600 28420 Galapagar, Madrid, Spain
95310 Saint Ouen l’Aumone, France Fax: +31 186 633605 Tel.: +34 (91) 849 9620
Tel.: +33 (1) 3440 7557 [email protected] Fax: +34 (91) 188 1311
Fax: +33 (1) 3440 7599 [email protected]
Mobile: +33 6 7016 8341
[email protected]

SEMICONDUCTOR MOUNTING CLAMPS PRODUC T C ATA LOG 2 021 43

Sweden Central Japan
ABB AB & South America Nihon Inter Electronics Corp.
Energy Industries, Service Center Attend On Tower 10F
72159 Västerås, Sweden Brazil 2-8-12, Shin-Yokohama, Kohoku-ku
Tel.: +46 (21) 325000 ABB Ltda. Yokohama-City, Kanagawa-ken
[email protected] Av. dos Autonomistas 1496 222-0033, Japan
06020 - 902 Osasco, SP, Brazil Tel.: +81 45 470 6082
Switzerland Tel.: +55 (11) 3688 9974 Fax: +81 45 472 7162
PowerParts AG Fax: +55 (11) 3688 9421 [email protected]
Schareggstrasse 1 Mobile: +55 (11) 98354 6348
5506 Mägenwil, Switzerland [email protected] Korea
Tel.: +41 (62) 896 7080 Milim Syscon Co., Ltd
Fax: +41 (62) 896 7088 Asia Pacific B214 Biz Center
[email protected] SK n Technopark 190-1
Australia, New Zealand Sangdaewon-Dong
Turkey & South East Asia Jungwon-Gu, Seongnam-Si
Protek Teknik Elektrik Ltd.Sti. Si-Chip Power Technologies Ltd. 462-721 Gyeonggi-Do, Korea
Okcumusa Cad.Kismet Han no:36/2 12th Floor, Rutton Jee House, Tel.: +82 (31) 776 2288/2291
34420 Karakoy, Istanbul, Turkey Tel.: Duddel Street, Central, Hong Kong Fax: +82 (31) 776 2292
+90 (212) 237 20 00 Tel.: +61 (3) 9008 7271 [email protected]
Direct: +90 (216) 685 10 10 Fax: +61 (3) 9646 4434 www.milimsys.com
Fax: +90 (212) 235 46 09 info @si-chip.com
[email protected] www.si-chip.com Taiwan
www.protek-teknik.com.tr Industrade Co., Ltd
China 10 F, No. 29 -1, Section 2
UK Beijing Sunking Electronic Zhong Zheng East Road
PPM Power Technology Co. Ltd. Tamsui District,
65 Shrivenham Hundred Bus. Floor 25, No 99 Kechuang 14th street 25170 New Taipei City, Taiwan, R.O.C.
Park Watchfield, Swindon SN6 8TY Economic and Technology Develop- Tel.: +886 (2) 2809 1251
Wiltshire, Great Britain ment Zone Fax: +886 (2) 2808 4990
Tel.: +44 (1793) 784 389 101111 Beijing, China [email protected]
Fax: +44 (1793) 784 391 Tel.: +86 (10) 5630 1111 www.industrade.com.tw
[email protected] Fax: +86 (10) 5630 1112
www.ppmpower.co.uk [email protected] Africa

USA / Canada India South Africa
Pankaj Electronics ABB South Africa
5S Components Inc. A-09, Sector 67 0200 - Power Electronics
630 Fifth Avenue Noida - 201303, India 2 Lake Road, Longmeadow Business
East McKeesport, PA 15035, USA Tel.: +91 (120) 248 4316 Estate (North)
Tel.: +1 (412) 967 5858 [email protected] 1609 Modderfontein, Gauteng,
Fax: +1 (412) 967 5868 South Africa
[email protected] Tel.: +27 (10) 202 5480
www.5SComponents.com Fax: +27 (11) 579 8650
Mobile: +27 (83) 703 7165
[email protected]

— 3BSE054408 rev H 2021.03
abb.com
abb.com/semiconductors
online.abb.com
[email protected]

—
We reserve the right to make technical
changes to the products or modify the
contents of this document without prior
notice. With regard to purchase orders,
the agreed particulars shall prevail.
ABB does not assume any responsibility
for any errors or incomplete information
in this document.
We reserve all rights to this document
and the items and images it contains.
The reproduction, disclosure to third
parties or the use of the content of this
document – including parts thereof
– are prohibited without ABB’s prior
written permission.
© Copyright 2021 ABB.
All rights reserved.