CATALOG INDUSTRIAL

mechanika.co.th

AIR COMPRESSOR

BELT-DRIVE SINGLE STAGE

PP35 PP35P PP275

PP310 PP315 PP620

เครื่องดูด-เป่าอากาศ/Ring Blower 47

AIR COMPRESSOR

OIL-FREE AIR SUPPLY. HIGH PERFORMANCE.
DURABLE DESIGN. LONGOVERHAUL CYCLE.

Suction filter Air valve High cool head

Piston
Cylinder

Heat cut piston pin Lpeisatkoncuritng
Connecting rod Rider ring

Breathing filter

SPECIFICATIONS (HORIZONTAL TANK MOUNT TYPE)

Pressure Switch Control

Model MotoOrukNWtpoumt inal SPooPuwHrecer MaxP.rMeDsiPsscauhrearge Control Method Extern(Walm×DDmim×Hen) sions

0.4LE-8S5A 0.4 1 0.8 Air Capacity VAoirlLuTmanek Air Outlet AScctaensdsaorrdies Weight
0.75OP-9.5GS5A L/min kg
0.75OP-9.5G5A 0.75 1 0.93 PreSSsatsofueprtyeVVGaalavlueeg, e,
1.5OP-9.5GS5A 0.75 3 0.93 42 20 - 600×322×608 40
1.5OP-9.5G5A 1.5 1 0.93 Pressure Gauge,
2.2OP-9.5GS5A 1.5 3 0.93 75 80 1/4B×1 Safety Valve, 1,173×380×852 90
2.2OP-9.5G5A 2.2 1 0.93 75 80 1/4B×1 Hose Joint, 1,173×380×852 85
3.7OP-9.5G5A 2.2 3 0.93 165 80 1/4B×1 Belt Cover, 1,173×431×897 121
5.5OP-9.5G5A 3.7 3 0.93 165 80 1/4B×1 1,173×393×897 110
7.5OP-8.5GA5A 5.5 3 0.93 240 90 1/4B×1 Silencer, 1,283×434×825 150
11OP-8.5GA5A 7.5 3 0.93 240 90 1/4B×1 Stop Valve 1,283×403×825 129
11 3 0.83 405 125 3/8B×1 1,345×423×913 158
605 150 3/8B×1 1,470×482×995 201
880 235 3/4B×1 1,674×552×1,045 282
1,285 290 3/4B×1 2,014×646×1,153 400

Note : 1. Use the compressor at a place where ambient temperature is 0 (at which there is no freeze of drain water) to 40˚C.
2. The capacity of compressed air is the amount of air discharged under the maximum pressure converted in terms of air suction (atmospheric pressure, ambient temperature 20˚C,humidity 60% .
3. Hitachi air compressors are not designed, intended or approved for breathing air applications.

MODEL NOMENCLATURE
3.7 O P - 9.5 G 5 A
for Asia
Motor Nominal Output (kw)

OIL FREE BEBICON Frequency (5 : 50Hz, 6 : 60Hz)

PU :: PAruetsosUurneloSawdeitrchTyTpyepe Green Series
Pressure (0.93MPa [9.5 kgf/cm2])

0.4 LE - 8S5A for Asia
Frequency (5 : 50Hz)
Motor Nominal Output (kw)
Super OIL FREE BEBICON(LE Series)

Single Phase

Pressure (0.8MPa)

48 Ring Blower/เครื่องดูด-เป่าอากาศ

mechanika.co.thUNIT 3

Ring
Blower

เเครื่องดดู -เปา่ ออาากกาาศศ

เครื่องดูด-เป่าอากาศ/RING BLOWER 49

REGENERATIVE BLOWER

ภาพการใชงานทพ่ี บบอ ยๆ

50 RING BLOWER/เคร่ืองดูด-เป่าอากาศ

mechanika.co.th

REGENERATIVE BLOWER

TWO STAGE

เครื่องดูด-เป่าอากาศ/RING BLOWER 51

REGENERATIVE BLOWER

TWO STAGE

Vacuum selection diagram 50 Hz

52 RING BLOWER/เคร่ืองดูด-เป่าอากาศ

SC SERIES mechanika.co.th

OPERATING PRINCIPLE AND APPLICATION FEATURE AND ADVANTAGES

DIMENSIONS

THERMAL PROTECTION

เครื่องดูด-เป่าอากาศ/RING BLOWER 53

SC SERIES

BLOWER AND VACUUM WITH 50 Hz - 60 Hz

CONTINUOUS
OPERATION PERMITTED

54 RING BLOWER/เคร่ืองดูด-เป่าอากาศ

mechanika.co.th

2SC SERIES

2SC1420,2SC1520 2SC1820,2SC1920

2SC1940 2SC3220 2SC1943

BLOWER AND VACUUM WITH 50 Hz - 60 Hz

50 1.6 200-240 ∆ /345-415 7.5 ∆ /4.3Y 66 150 -280 280
180 -320 310
2SC1420-36 60 2.05 220-275 ∆ /380-480 7.6 ∆ /4.4Y 25 69
2SC1420-46
2SC1520-46 50 2.2 200-240 ∆ /345-415 9.7 ∆ /5.6Y 66 150 -330 420
2SC1520-57 27 69 180 -350 440
2SC1720-16
2SC1720-26 60 2.55 220-275 ∆ /380-480 10.0 ∆ /5.8Y
2SC1720-37
2SC1720-47 50 3.0 200-240 ∆ /345-415 12.5 ∆ /7.2Y 72 230 -340 410
2SC1720-57 74 275 -380 360
2SC1740-37 60 3.45 220-275 ∆ /380-480 12.6 ∆ /7.3Y 40
2SC1740-47
2SC1740-57 50 4.0 345-415 ∆ /600-720 10.0 ∆ /5.8Y 72 230 -390 440
275 -410 480
60 4.6 380-480 ∆ /660-720 9.9 ∆ /5.71Y 41 74

50 2.2 200-240 ∆ /345-415 9.7 ∆ /5.6Y 58 320 -220 210
60 2.55 220-275 ∆ /380-480 10.3 ∆ /6.0Y 43 60 380 -170 150

50 3.0 200-240 ∆ /345-415 12.5 ∆ /7.2Y 73 320 -280 260
76 380 -230 200
60 3.45 220-275 ∆ /380-480 12.6 ∆ /7.3Y 48

50 4.3 345-415 ∆ /600-720 10.0 ∆ /5.2Y 73 320 -360 380
380 -350 320
60 4.8 380-480 ∆ /660-720 10.4 ∆ /6.0Y 54 76

50 5.5 345-415 ∆ /600-720 13.3 ∆ /7.7Y 73 320 -440 500
380 -440 500
60 6.3 380-480 ∆ /660-720 13.3 ∆ /7.7Y 66 76

50 7.5 345-415 ∆ /600-720 16.7 ∆ /9.6Y 73 320 -440 570
380 -460 660
60 8.6 380-480 ∆ /660-720 17.3 ∆ /10.0Y 73 76

50 4.0 345-415 ∆ /600-720 9.0 ∆ /5.2Y 74 500 -150 140
600 -100 90
60 4.6 380-480 ∆ /660-720 9.0 ∆ /5.2Y 54 78

50 5.5 345-415 ∆ /600-720 13.3 ∆ /7.7Y 74 500 -240 260

60 6.3 380-480 ∆ /660-720 13.3 ∆ /7.7Y 69 78 600 -210 200

50 7.5 345-415 ∆ /600-720 16.7 ∆ /9.6Yเ ค รื่ อ ง ดู ด - เ ป่ า อ74า ก า ศ / R5I N00G B LO-2W40E R 53250

75

2SC1520-46 50 3.0 200-240 ∆ /345-415 12.5 ∆ /7.2Y 40 72 230 -340 410
60 3.45 220-275 ∆ /380-480 41
12.6 ∆ /7.3Y 43 74 275 -380 360
2SC1520-57 50 4.0 345-415 ∆ /600-720 48
60 4.6 380-480 ∆ /660-720 10.0 ∆ /5.8Y 54 72 230 -390 440
66
2SC2SC1720-16 SERIES50 2.2 200-240 ∆ /345-415 9.9 ∆ /5.71Y 73 74 275 -410 480
2SC1720-26 60 2.55 220-275 ∆ /380-480 54
50 3.0 200-240 ∆ /345-415 9.7 ∆ /5.6Y 26094 58 320 -220 210
60 3.45 220-275 ∆ /380-480 27151
10.3 ∆ /6.0Y 18837 60 380 -170 150
2SC1720-37 50 4.3 345-415 ∆ /600-720 28162
12.5 ∆ /7.2Y 211094 73 320 -280 260
BLOWER AND V6500ACUUM45..85WITH 50 Hz - 60 Hz380-480 ∆ /660-720 212200
2SC1720-47 12.6 ∆ /7.3Y 29310 76 380 -230 200
345-415 ∆ /600-720 213150
10.0 ∆ /5.2Y 12847 73 320 -360 380
60 6.3 380-480 ∆ /660-720 12987
10.4 ∆ /6.0Y 22094 76 380 -350 320
2SC1720-57 50 7.5 345-415 ∆ /600-720 23101
60 8.6 380-480 ∆ /660-720 13.3 ∆ /7.7Y 13837 73 320 -440 500
23192
2SC1740-37 50 4.0 345-415 ∆ /600-720 13.3 ∆ /7.7Y 24109 76 380 -440 500
60 4.6 380-480 ∆ /660-720 25210
16.7 ∆ /9.6Y 24380 73 320 -440 570
22SSCC11972400-3-477 5500 250..50 334455--441155 ∆∆ //660000--772200 26355
17.3 ∆ /10.0Y 24 76 380 -460 660
6600 263..30 338800--448800 ∆∆ //666600--772200 28
9.0 ∆ /5.2Y 29 74 500 -150 140
22SSCC11972400-4-577 5500 275..50 334455--441155 ∆∆ //660000--772200 30
9.0 ∆ /5.2Y 78 600 -100 90
6600 289..60 338800--448800 ∆∆ //666600--772200
4103.0.3∆∆/2/73..70YY 7744 1510100 --424400 520600
22SSCC11984200-2-177 5500 155..50 334455--441155 ∆∆ //660000--772200 4123.0.3∆∆/2/74..72YY 7788 1630100 --424100 423000
5126.0.7∆∆/3/90..60YY 7744 1510100 --424400 539200
6600 167..35 338800--448800 ∆∆ //666600--772200 5127..03 ∆∆ //3100..00YY 7788 1630100 --424700 534000
3153.0.3∆∆/2/70..70YY 7754 1592400 --123500 121400
22SSCC11984200-3-277 5500 270..50 334455--441155 ∆∆ //660000--772200 3163.5.3∆∆/2/71..70YY 8748 2632100 --16700 14600
4106.0.7∆∆/2/93..60YY 7754 1592400 --242000 240000
6600 283..60 338800--448800 ∆∆ //666600--772200 4127..03 ∆∆ //2140..20YY 8748 2632100 --136600 133300
5228..00 ∆∆ //3106..02YY 7754 1592400 --341300 268000
22SSCC11984200-4-377 5500 2151..00 334455--441155 ∆∆ //660000--772200 5229..00 ∆∆ //3106..07YY 8748 2632100 --247600 262000
3352..05 ∆∆ //2108..08YY 7754 2502500 --146600 167700
6600 2192..06 338800--448800 ∆∆ //666600--772200 3364..55 ∆∆ //2119..09YY 8748 --142900 171500
4106.0.7∆∆/2/93..60YY 7754 2642800 --225000 213800
22SSCC11984230-2-477 5500 1155..00 334455--441155 ∆∆ //660000--772200 4127..03 ∆∆ //2140..20YY 8748 2900500 --119500 118200
5228..00 ∆∆ //3106..02YY 7754 21408500 --321800 238700
6600 1177..53 338800--448800 ∆∆ //666600--772200 5229..00 ∆∆ //3106..07YY 8748 2900500 --237100 233500
284.0∆∆/2/.136Y.2Y 5784 21408500 --337000 429700
22SSCC11984430-3-277 5500 270..50 334455--441155 ∆∆ //660000--772200 294.0∆∆/2/.136Y.7Y 6728 141710 --424200 428000
375..50 ∆∆ //42.03.Y0Y 5784 163010 --347100 635700
6600 283..60 338800--448800 ∆∆ //666600--772200 376..65 ∆∆ //42.14.Y0Y 6728 141710 --530400 734000
450..40 ∆∆ //32.31.Y0Y 5794 163010 --444000 458000
22SSCC11984430-4-377 5500 2151..00 334455--441155 ∆∆ //660000--772200 452..40 ∆∆ //32.41.Y2Y 6738 161510 --448400 448300
572..50 ∆∆ //43.03.Y0Y 5794 173610 --444400 554900
6600 2192..06 338800--448800 ∆∆ //666600--772200 572..50 ∆∆ //43.04.Y0Y 6738 161510 --546400 650400
375..50 ∆∆ //42.03.Y0Y 6715 173610 --418300 415100
22SSCC31292200-2-1677 5500 01.28.15 230405--244105 ∆∆ //364050--471250 376..65 ∆∆ //42.14.Y0Y 6864 189740 -4-6300 44100
401.30∆∆//72.35.Y0Y 6715 2130150 --520200 725000
6600 01.49.45 232800--247850 ∆∆ //368600--478200 421.30.8∆∆/2/48.Y2Y 6864 189740 --511600 815300
5121..04 ∆∆ //360.6.0YY 6745 2130150 --437100 426800
22SSCC31292200-5-2677 5500 116.5.5 230405--244105 ∆∆ //364050--471250 5121..02 ∆∆ //360.5.0YY 7804 1192400 --520700 425200
35.0 9∆ ∆/20.0Y 6755 2134150 --510600 812700
6600 11.97.50 232800--247850 ∆∆ //368600--478200 36.59∆.5/2∆1.0Y 7814 2102500 --513200 811100
401.30∆∆//72.35.Y0Y 6775 2144850 --426500 520300
22SSCC31392200--43677 5500 210.1.0 230405--244105 ∆∆ //364050--471250 4124..02 ∆∆ //284.2.2YY 7814 2106550 --418900 412800
6600 52.012∆.5/3∆0.0Y 6785 2149850 --436100 724800
213.3.0 232800--247850∆∆//368600--478200 52.01∆2 /∆30.0Y 7824 2106550 --428700 824300
58 2149850 -370 490
22SSCC31392200--54677 5500 215.5.0 230405--244105 ∆∆ //364050--471250 4 ∆ /2.3Y
62 47 -440 480
6600 12.97.50 232800--247850∆∆//368600--478200 4 ∆ /2.3Y
58 60 -370 650
22SSCC31492400--22677 5500 115.5.0 230405--244105 ∆∆ //364050--471250 7.5 ∆ /4.3Y
62 47 -500 740
6600 11.77.55 232800--247850∆∆//368600--478200 7.6 ∆ /4.4Y
59 60 -400 480
22SSCC31492400--53677 5500 230.3.0 230405--244105 ∆∆ //364050--471250 5.4 ∆ /3.1Y
6600 63 65 -480 480
233.8.0 232800--247850∆∆//368600--478200 5.4 ∆ /3.1Y
59 76 -440 540
22SSCC31592400--24678 5500 225.2.0 230405--244105 ∆∆ //364050--471250 7.5 ∆ /4.3Y
63 65 -560 600
6600 22.95.50 232800--247850∆∆//368600--478200 7.5 ∆ /4.4Y
61 76 -480 450
22SSCC31592403--72778 5500 154.0 345-431455-∆41/650∆0-720 7.5 ∆ /4.3Y
6600 147.6.5 380-438800-∆48/606∆0-720 87

22SSCC31692403--33678 5500 230.3.0 230405--244105 ∆∆ //364050--471250
6600
233.8.0 232800--247850∆∆//368600--478200

22SSCC31692403--54778 5500 255.7.0 345-431455-∆41/650∆0-720
6600 269.6.0 380-438800∆-4/86060-720

50 0.81 200-240 ∆ /345-415
2SC3220-267 60 0.94 220-275 ∆ /380-480

50 1.5 200-240 ∆ /345-415
2SC3220-567 60 1.75 220-275 ∆ /380-480

50 1.1 200-240 ∆ /345-415
2SC3320-467 60 1.3 220-275 ∆ /380-480

2SC3320-567 50 1.5 200-240 ∆ /345-415

56 RING B6L0OW E R1/.7เ5ค ร่ื อ ง2ด2ู0ด-2-7เ5ป∆่ า/อ38า0ก-4า8ศ0

50 1.5 200-240 ∆ /345-415

22SSCC11984400--2277 5500 175..50 334455--441155 ∆∆ //660000--772200 3156.0.7∆∆/2/90..60YY 19817 7754 1990400 --123000 111800
6600 187..65 338800--448800 ∆∆ //666600--772200 3167..53 ∆∆ //2110..00YY 211120
4208..00 ∆∆ //2136..02YY 211897 8748 21301500 --16500 41020
4229..00 ∆∆ //2146..27YY 212907
22SSCC11984400--3377 5500 2101..00 334455--441155 ∆∆ //660000--772200 5228..00 ∆∆ //3106..02YY 230 7754 1990400 m e-c-222h800a n i ka2.30c70o0 . t h
5229..00 ∆∆ //3106..07YY 235
6600 2132..06 338800--448800 ∆∆ //666600--772200 3355..00 ∆∆ //2200..00YY 24 8748 21301500 --136100 133500
3366..55 ∆∆ //2211..00YY 28
2152..05 334455--441155 ∆∆ //660000--772200 40.0 ∆ /23.0Y 22094 11914100 --331000 228700
2SC22SSCC11994200--4177 SERIES5500 42.0 ∆ /24.2Y 23101 7754
52.0 ∆ /30.0Y 13837
22SSCC11994230--2277 6600 2194..05 338800--448800 ∆∆ //666600--772200 52.0 ∆ /30.0Y 23192 8748 21331100 --227200 222000
24109
5500 1156..05 334455--441155 ∆∆ //660000--772200 4 ∆ /2.3Y 25210 7754 21015100 --146100 137700
4 ∆ /2.3Y 24380
6600 1179..50 338800--448800 ∆∆ //666600--772200 7.5 ∆ /4.3Y 26355 8748 21438100 --132400 131000
7.6 ∆ /4.4Y 24
50 20.0 345-415 ∆ /600-720 405.04 ∆ /233.1.0YY 28 75 2050 -250 230
425.04 ∆ /234.1.2YY 29
2SC1943-37 AND V5600ACUUM2253..W00 ITH 50 Hz - 60 Hz380-480 ∆ /660-720 527.05 ∆ /340.3.0YY 30 84 2480 -190 180
527.05 ∆ /340.4.0YY 33
BLOWER 345-415 ∆ /600-720 357.05 ∆ /240.3.0YY 39 75 2050 -310 280
367.56 ∆ /241.4.0YY 40
2SC1943-47 60 29.0 380-480 ∆ /660-720 401.30 ∆ /72.35.Y0Y 51 84 2480 -270 230
421.30.8∆ ∆/2/48.Y2Y 48
50 0.81 200-240 ∆ /345-415 5121.0.4∆∆/3/60..60YY 65 58 47 -370 490
5121.0.2∆∆/3/60..50YY
2SC3220-267 60 0.94 220-275 ∆ /380-480 35.0 ∆9 /∆20.0Y 62 60 -440 480
36.59∆.5/2∆1.0Y
50 1.5 200-240 ∆ /345-415 401.30 ∆ /72.35.Y0Y 58 47 -370 650
4124.0.2∆∆/2/84..22YY
2SC3220-567 60 1.75 220-275 ∆ /380-480 52.012∆.5/3∆0.0Y 62 60 -500 740
52.0 1∆2/3∆0.0Y
2SC139320-34767 50 210..10 324050-421450 ∆ /630405-742105 4 ∆ /2.3Y 7549 116150 --444000 54080
4 ∆ /2.3Y
60 213..30 23280-247850 ∆ /36860-47820 7.5 ∆ /4.3Y 7683 137160 -4480 4380
7.6 ∆ /4.4Y
2SC139320-45767 50 215..50 324050-421450 ∆ /630405-742105 5.4 ∆ /3.1Y 7549 116150 -440 559400
5.4 ∆ /3.1Y
60 219.7.05 23280-247850 ∆ /36860-47820 7.5 ∆ /4.3Y 7683 137160 -45460 56400
7.5 ∆ /4.4Y
2SC1394420-2767 50 115..50 324050-421450 ∆ /630405-742105 7.5 ∆ /4.3Y 7651 198470 -14380 141500
7.6 ∆ /4.4Y
60 17.7.5 23280-247850 ∆ /36860-47820 13 ∆ /7.5Y 8646 2130150 --46300 44100
13.8 ∆ /8Y
2SC1394420-35767 50 230..30 324050-421450 ∆ /630405-742105 11.4 ∆ /6.6Y 7651 198470 -25200 27050
11.2 ∆ /6.5Y
60 233..80 23280-247850 ∆ /36860-47820 8646 2130150 -15610 18350
9∆
2SC1395420-42768 50 225..20 324050-421450 ∆ /630405-742105 9.5 ∆ 7654 1192400 --341700 248600
13 ∆ /7.5Y
60 29.5.05 23280-247850 ∆ /36860-47820 14.2 ∆ /8.2Y 8740 2134150 -25700 24250
12.5 ∆
2SC13954230-2778 50 154.0 345-431455∆-4/1650∆0-720 12 ∆ 765 2102500 --156000 18720

60 147..65 380-438800∆-4/8606∆0-720 8741 2144850 -15230 1810

2SC13964230-3768 50 230..30 324050-421450 ∆ /630405-742105 7657 2106550 -24560 253000

60 233..80 23280-247850 ∆ /36860-47820 8741 2149850 -14980 148200

2SC13964230-4578 50 255..70 345-431455∆-4/1650∆0-720 7658 2106550 --341600 278400

60 269..60 380-483080∆-4/68600-720 8742 2149850 -24780 28340

50 0.81 200-240 ∆ /345-415 58 47 -370 490

2SC3220-267 0.94 220-275 ∆ /380-480 480
SERIES60 62 60 -440
3SC2SC3220-567
50 1.5 200-240 ∆ /345-415 58 47 -370 650

60 1.75 220-275 ∆ /380-480 62 60 -500 740

50 1.1 200-240 ∆ /345-415 59 65 -400 480
2SC3320-467 60 1.3 220-275 ∆ /380-480
63 76 -480 480

50 1.5 200-240 ∆ /345-415 59 65 -440 540

2SC3320-567 60 1.75 220-275 ∆ /380-480 63 76 -560 600

50 1.5 200-240 ∆ /345-415 61 87 -480 450

2SC3420-267 60 1.75 220-275 ∆ /380-480 66 105 -430 410

50 3.3 200-240 ∆ /345-415 61 87 -500 750
2SC3420-567 60 3.8 220-275 ∆ /380-480
66 105 -510 850

50 2.2 200-240 ∆ /345-415 64 120 -470 460

2SC3520-268 60 2.55 220-275 ∆ /380-480 703SC3613450-678-500 450
820
50 4 345-415∆ 65 120 -500
2SC3520-778 60 4.6 380-480∆
71 145 -530 810

50 3.3 200-240 ∆ /345-415 67 165 -460 500

2BSCL3O62W0-E36R8 AND V60ACUUM3.8WITH 52200-H27z5-∆6/3080H-4z80 71 195 -480 420

50 5.7 345-415∆ 68 165 -460 740
2SC3620-578 60 6.6 380-480
72 195 -480 840

50 "7.5 345-415 ∆ 16 ∆ 72 70 -730 1040
3SC3630-678 60 8.6" 380-480 ∆ 16 ∆ 86 76 200 -700 1040

เครื่องดูด-เป่าอากาศ/RING BLOWER 57

50 3.3 200-240 ∆ /345-415 13 ∆ /7.5Y 67 165 -460 500
60 3.8 220-275 ∆ /380-480 14.2 ∆ /8.2Y 71
2SC3620-368 50 5.7 48 68 195 -480 420
2SC3620-578 60 6.6 345-415∆ 12.5 ∆ 65 72
380-480 12 ∆ 165 -460 740

195 -480 840

FIL TER

58 RING BLOWER/เคร่ืองดูด-เป่าอากาศ

mechanika.co.thUNIT 4

MOTOR
AIR MOTER

มมอเตอร/์ มอเเตตออรร์ลล์ มม

มอเตอร์/มอเตอร์ลม/MOTOR/AIR MOTER 59

AIR MOTOR 2AM-FCW-13 คณุ ลกั ษณะ
2AM-FCC-1
1AM-NCE-14 2AM-NCW-7A - ใชแทนมอเตอรกันระเบดิ
1AW-NPV-39A 2AM-NRV-89 - ปรับความเรว็ รอบได
1UP-NRV-3A - ใชในพ้นื ที่ไวไฟ
- เคลอื่ นยายและตดิ ต้ังสะดวก
- ปรบั ปรงบิดหรือแรงมาได

2AM-NRV-90 2AM-ARV-92
2AM-NCC-43A 2AM-ARV-93
4AM-ARV-120
4AM-ARV-119

4AM-FRV-13H 4AM-FRV-13H 4AM-FRV-13H
4AM-FRV-63A 4AM-FRV-63A 4AM-FRV-63A

60 MOTOR/AIR MOTER/มอเตอร์/มอเตอร์ลม

mechanika.co.th

AIR MOTOR 6AM-NRV-11A 6AM-ARV-54
6AM-NRV-22A 6AM-ARV-55
6AM-FRV-5A
6AM-FRV-23A

6AM-NRV-7A 8AM-FRV-2B 8AM-ARV-70
8AM-NRV-5B 8AM-ARV-71

8AM-NRV-32A 16AM-FRV-2 16AM-FRV-13

มอเตอร์/มอเตอร์ลม/MOTOR/AIR MOTER 61

AIR POWER GEARMOTOR

1AM-NRV-56 GEAR 4AM-RV-75 GEAR
1AM-NRV-60 GEAR
1UP-NRV-4 GEAR

4AM-70C-CB20 GEAR 6AM-22A-CB10 GEAR
4AM-RV-75-GB25 GEAR 6AM-22A-DB20 GEAR

6AM-22A-GB-40 GEAR 16AM-13HB-20 GEAR
6AM-20A-DB20 GEAR

62 MOTOR/AIR MOTER/มอเตอร์/มอเตอร์ลม

mechanika.co.th

AIR MOTOR

MVP HUB MOUNT

DIMENSIONS

The hub face hole pattern is the
same on all MVP models.

PORTING & THREADING

MVP02 and MVP03 models have 1/4” and 3/8” porting. MVP05
and MVP06 models have 3/8” and 1/2” porting. Imperial
models are NPT thread and metric models are BSP thread.

Model Number Inches C
AB
MVP02DS-ANC-HXXA-01 2.75
MVP02DS-ANC-HXSA-01 4.65 2.60 2.75
MVP03DS-ANC-HXXA-01 4.65 2.60 2.75
MVP03DS-ANC-HXSA-01 5.25 2.60 2.75
MVP05DS-ANC-HXXA-01 5.25 2.60 3.25
MVP05DS-ANC-HXSA-01 5.56 2.64 3.25
MVP06DS-ANC-HXXA-01 5.56 2.64 3.25
6.28 2.61

มอเตอร์/มอเตอร์ลม/MOTOR/AIR MOTER 63

AIR MOTOR FLANGE MOUNT PORTING & THREADING

MVP HUB MOUNT

FLANGE MOUNT

MVP02 and MVP03 models have 1/4” and 3/8” porting. MVP05 and MVP06 models have
3/8” and 1/2” porting. Imperial models are NPT thread and metric models are BSP thread.

IEC D71-B5 FLANGE DIMENSIONS IEC D80-B5 FLANGE DIMENSIONS

Model Number Inches NEMA 56C FLANGE DIMENSIONS
MVP02DS-ANC-NXXA-01 A B C Flange
MVP02DS-ANC-NXSA-01
MVP02DS-ANC-IXXA-01 5.15 2.10 2.75 NEMA 56C
MVP03DS-ANC-NXXA-01 5.15 2.10 2.75 NEMA 56C
MVP03DS-ANC-NXSA-01 5.15 1.18 2.75 IEC D71-B5
MVP03DS-ANC-IXXA-01 5.75 2.10 2.75 NEMA 56C
MVP05DS-ANC-NXXA-01 5.75 2.10 2.75 NEMA 56C
MVP05DS-ANC-NXSA-01 5.75 1.18 2.75 IEC D71-B5
MVP05DS-ANC-IXXA-01 6.06 2.14 3.25 NEMA 56C
MVP06DS-ANC-NXXA-01 6.06 2.14 3.25 NEMA 56C
MVP06DS-ANC-IXXA-01 6.05 1.59 3.25 IEC D80-B5
6.78 2.11 3.25 NEMA 56C
6.77 1.59 3.25 IEC D80-B

64 MOTOR/AIR MOTER/มอเตอร์/มอเตอร์ลม

mechanika.co.th

SUPER LINE J SERIES

มอเตอร์ไฟฟา้ THREE PHASE INDUCTION MOTOR

THREE PHASE MOTOR CHARACTERISTICS
HT (380~415V 50Hz, 380~440V 60Hz)

มอเตอร์/มอเตอร์ลม/MOTOR/AIR MOTER 65

SUPER LINE K SERIES

มอเตอรไ์ ฟฟา้ SINGLE PHASE INDUCTION MOTOR

CHARACTERISTICS AND PERFORMANCE

66 MOTOR/AIR MOTER/มอเตอร์/มอเตอร์ลม

mechanika.co.thUNIT 5

CHEMICAL
PUMP

ป๊ มั สารเคมมี ี

ป๊ ัมสารเคมี/CHEMICAL PUMP 67

SOLENOLD

DIAPHRAGM METERING PUMP
MSJ1 SERIES

PVDF SS

PARAMETER TABLE

68 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

SOLENOLD

DIAPHRAGM METERING PUMP
MSJ2 SERIES

PARAMETER TABLE

ป๊ ัมสารเคมี/CHEMICAL PUMP 69

MECHANICAL

DIAPHRAGM METERING PUMP
MMJ1 SERIES

PARAMETER TABLE

70 CHEMICAL PUMP/ป๊ ัมสารเคมี

MECHANICAL mechanika.co.th
MMG3
DIAPHRAGM METERING PUMP
MMG SERIES

MMG1 MMG2

ป๊ ัมสารเคมี/CHEMICAL PUMP 71

MECHANICAL

DIAPHRAGM METERING PUMP
MMG1 SERIES

PARAMETER TABLE

MMG1

72 CHEMICAL PUMP/ป๊ ัมสารเคมี

MECHANICAL mechanika.co.th
MMG2
DIAPHRAGM METERING PUMP

MMG2 SERIES

PARAMETER TABLE

MMG3 SERIES MMG3

PARAMETER TABLE

ป๊ ัมสารเคมี/CHEMICAL PUMP 73

MECHANICAL

DIAPHRAGM TYPE METERING PUMP
MPA SERIES

TECHNICAL DATA

74 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

MECHANICAL

DIAPHRAGM TYPE METERING PUMP
MMG2 SERIES

TECHNICAL DATA

ป๊ ัมสารเคมี/CHEMICAL PUMP 75

ACCESSORIE

76 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

DOSSER ROTOR PUMP

TYPICAL ROTORS AND APPLICATION FEATURES

Model Capacity Flow Speed Max Pressure Viscosity Power Connection on
LR11-L L/R m3/h rpm Mpa cp kw Hoop Flange
LR12-L 0.05 0~1 40~700 1.0
LR13-L 0.1 0.2~2 40~700 1.2 1~500000 0.25~1.5 1” DN20
LR15-L 0.17 0.4~3 40~500 1.2 1~500000 0.55~2.2 1.25” DN25
LR18-L 0.26 0.6~5 40~500 1.5 1~1000000 0.75~3.0 1.5” DN32
LR112-L 0.46 1~8 40~450 1.5 1~1000000 1.5~5.5 2” DN40
LR120-L 0.70 1.6~1.2 40~450 1.5 1~1000000 2.2~11 2.5” DN50
LR135-L 1.20 2.8~20 40~400 1.5 1~1000000 3.0~15 2.5” DN50 or DN65
LR155-L 2.10 5~35 40~400 1.5 1~1000000 4.0~18.5 3” DN65 or DN80
LR180-L 4.20 10~55 40~350 1.5 1~1000000 7.5~30 4” DN100
LR1120-L 6.70 16~80 40~350 1.5 1~1000000 11~45
11.0 26~120 40~350 1.5 1~1000000 15~75 - DN125
1~1000000 22~90 - DN125 or DN150
- DN150

ป๊ ัมสารเคมี/CHEMICAL PUMP 77

CHEMPRO SELF PRIMING PUMP

PD AND PD-F TYPE SPECIFICATIONS

78 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

CHEMPRO SELF PRIMING PUMP

ป๊ ัมสารเคมี/CHEMICAL PUMP 79

DIAPHAGM PUMP “DP SERIES”

ป๊ มั ไดอะแฟรม

DP15 DP40 DP50 DP80
Stainless Pump Plastic Pump Aluminum Cast Iron Pump Aluminum Pump

SPECIFICATIONS

80 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

AGNET PUMP “PMD SERIES”

FOR CHEMICAL & SEA WATER

ป๊ ัมสารเคมี/CHEMICAL PUMP 81

CHEMICAL PUMP

Material

82 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

WATER QUALITY CONTROLLER

FEATURES

ป๊ ัมสารเคมี/CHEMICAL PUMP 83

ph/ORP CONTROLLER

SPECIFICATIONS
SPECIFICATIONS

84 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

DISSOLVED OXYGEN

SPECIFICATIONS

SPECIFICATIONS

ป๊ ัมสารเคมี/CHEMICAL PUMP 85

RESIDUAL CHLORINE

SPECIFICATIONS
SPECIFICATIONS

86 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

CONDUCTIVITY

P CONTROLLER/pH CHECKER

ACCESSORIES

FEATURES

SPECIFICATIONS
STANDARD ACCESSORIES

ป๊ ัมสารเคมี/CHEMICAL PUMP 87

SENSOR

88 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

SENSOR

PROBE

CHIP

SENSOR

HOLDER

ป๊ ัมสารเคมี/CHEMICAL PUMP 89

MAGNETIC DRIVE PUMP

APPLICATIONS

Circulation of moderately corrosive acids, alkalis, solvents, brine, plating solutions,
sterile solutions, and other moderately corrosive chemicals and solutions that are
compatible with the pump's material of construction

2-MD-SC

1/25 HP or 1/30 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

580503 2-MD-SC 115 6' 8.5 gpm
230 1.8 m 32.2 lpm
580513 2-MD-SC 8.5 gpm
580598 - 6' 32.2 lpm
2-MD-SC 1.8 m
Pump head less motor (w/o plug) -

-

3-MD-SC

1/12 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

581503 3-MD-SC 115 6' 12.5 gpm
230 1.8 m 47.3 lpm
581513 3-MD-SC 12.5 gpm
581597 - 6' 47.3 lpm
3-MD-SC 1.8 m
Pump head less motor (w/o plug) -

-

90 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

MAGNETIC DRIVE PUMP

4-MD-SC

1/10 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

582503 4-MD-SC 115 6' 14 gpm
582598 4-MD-SC - 1.8 m 53 lpm
Pump head less motor
- -

5-MD-SC

1/8 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

583503 5-MD-SC 115 6' 17.5 gpm
230 1.8 m 66.2 lpm
583513 5-MD-SC 17.5 gpm
583598 - 6' 66.2 lpm
5-MD-SC 1.8 m
Pump head less motor (w/o plug) -

-

ป๊ ัมสารเคมี/CHEMICAL PUMP 91

MAGNETIC DRIVE PUMP

APPLICATIONS

Circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile
solutions, and other highly corrosive chemicals and solutions that are compatible with
the pump's material of construction

2-MD-HC

1/30 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

580603 2-MD-HC 115 6' 8.5 gpm
230 1.8 m 32.2 lpm
580613 2-MD-HC 8.5 gpm
580698 - 6' 32.2 lpm
2-MD-HC 1.8 m
Pump head less motor (w/o plug) -

-

3-MD-HC

1/12 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

581603 3-MD-HC 115 6' 12.5 gpm
230 1.8 m 47.3 lpm
581613 3-MD-HC 12.5 gpm
581697 - 6' 47.3 lpm
3-MD-HC 1.8 m
Pump head less motor (w/o plug) -

-

92 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

MAGNETIC DRIVE PUMP

4-MD-HC

1/10 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

582603 4-MD-HC 115 6' 14 gpm
582698 4-MD-HC - 1.8 m 53 lpm
Pump head less motor
- -

5-MD-HC

1/8 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

583603 5-MD-HC 115 6' 17.5 gpm
230 1.8 m 66.2 lpm
583613 5-MD-HC 17.5 gpm
583698 - 6' 66.2 lpm
5-MD-HC 1.8 m
Pump head less motor (w/o plug) -

-

ป๊ ัมสารเคมี/CHEMICAL PUMP 93

MAGNETIC DRIVE PUMP

APPLICATIONS

Circulation of moderately corrosive acids, alkalis, solvents, brine, plating solutions,
sterile solutions, and other moderately corrosive chemicals and solutions that are
compatible with the pump's material of construction

TE-4-MD-SC

1/10 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

582504 TE-4-MD-SC 115 6' 14 gpm
582514 TE-4-MD-SC 230 1.8 m 53 lpm
14 gpm
6' 53 lpm
1.8 m
(w/o plug)

TE-5-MD-SC

1/8 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

584504 TE-5-MD-SC 115/230 6' 20 gpm
584598 - 1.8 m 75.7 lpm
TE-5-MD-SC Cord not installed
Pump head less motor -

94 CHEMICAL PUMP/ป๊ ัมสารเคมี

mechanika.co.th

MAGNETIC DRIVE PUMP

TE-6-MD-SC

1/2 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

586504 TE-6-MD-SC 115/230 Not included 38 gpm
586598 TE-6-MD-SC 143.8 lpm
Pump head less motor --
-

TE-7-MD-SC

3/4 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

587400 TE-7-MD-SC 115/230 Not 53 gpm
included 200.6 lpm

ป๊ ัมสารเคมี/CHEMICAL PUMP 95

MAGNETIC DRIVE PUMP

APPLICATIONS

Circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile
solutions, and other highly corrosive chemicals and solutions that are compatible with
the pump's material of construction.

TE-3-MD-HC

1/25 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

581604 TE-3-MD-HC 115 6' 9.75 gpm
581614 230 1.8 m 36.9 lpm
581698 TE-3-MD-HC 9.75 gpm
TE-3-MD-HC - 6' 36.9 lpm
Pump head less motor 1.8 m
(w/o plug) -

-

TE-4-MD-HC

1/10 HP
Non-Submersible, In-line Use

Item # Model Volts Cord Capacity

582604 TE-4-MD-HC 115 6' 14 gpm
582614 TE-4-MD-HC 230 1.8 m 53 lpm
14 gpm
6' 53 lpm
1.8 m
(w/o plug)

96 CHEMICAL PUMP/ป๊ ัมสารเคมี