Mechanical Engineering & Materials Science 2017

 10

2017 CATALOGUE

Click on titles for
more information

MECHANICAL ENGINEERING &
MATERIALS SCIENCE
Eurospan|group

1

SPECIAL PRE-PUBLICATION PRICE American Society of Mechanical Engineers
CONSENSUS ON PRE-COMMISSIONING
STRESS-CORROSION CRACKING STAGES FOR COGENERATION AND
Materials Performance and Evaluation, COMBINED CYCLE POWER PLANTS
Second Edition Combined Cycle Task Group for the Water
Technology Subcommittee of the ASME
Edited by Russell H. Jones Research and Technology Committee on Water
Jan 2017 500pp and Steam in Thermal Systems
Pre-publication price
9781627081184 Hardback £220.00 / €240.00 Feb 2017 100pp
(Price after publication £245.00 / €265.00) 9780791861264 Paperback £50.95 / €57.00
This new second edition serves as a go-to reference on An important adjunct to several previously published
the complex subject of stress corrosion cracking (SCC), documents prepared to inform, educate and assist the reader
offering information to help metallurgists, materials in adequately considering and planning for the many major
scientists, and designers determine whether SCC will activities involved in the design, construction and start-up of
be an issue for their design or applications; and for the cogeneration and combined cycle power plants.
failure analyst to help determine if SCC played a role in a BUY NOW
failure under investigation.
Research conducted over the last 20 years warranted new ASM International
coverage on crack tip chemistry analysis and modelling, ASM HANDBOOK, VOLUME 4E
SCC of low strength steels in alcohol, SCC in new high Heat Treating of Nonferrous Alloys
strength steels, new data in SCC of stainless steels and Edited by George E. Totten
nickel-based alloys, SCC of copper alloys in potable water,
and hydrogen induced cracking of aluminium alloys. Oct 2016 670pp
Additional case studies and a section on high strength 9781627081122 Hardback £275.00 / €350.00
low alloy steels were added. An appendix of relevant This singular work gives engineers, analysts, and technicians
standards pertaining to SCC is also included. a one-stop source on the wide variety of nonferrous alloys.
The book details the many conditions under which With expanded coverage on both the industrial practice and
SCC can occur, the parameters which control SCC, and the science of heat treating, this new volume provides more
methodologies for mitigating and testing for SCC, plus practical information to guide processing requirements and
information on the mechanism of SCC with experimental the necessary background information for those without
data on a variety of materials. It contains information extensive prior knowledge.
about the environmental, mechanical, microstructural BUY NOW
and chemical aspects of SCC to help predict and prevent
component failure. Click on titles for
more information
ASM International

BUY NOW

35 Years of Scientific, Engineering 2
and Biomedical Data

BEGELL DIGITAL
PORTAL

www.begellhouse.com/begell_digital_portal

www.begellhouse.com AD

To request a trial or to receive more information
on Begell House digital products please contact Tony O'Rourke

Email: [email protected]

Tel: +44 (0)20 7240 0856

Address: Eurospan Group, 3 Henrietta Street, London WC2E 8LU, UK

3

ASM HANDBOOK, VOLUME 3 ISA
Alloy Phase Diagrams
DETECTING LEAKS IN PIPELINES
Edited by Mark E. Schlesinger & Erik M. Mueller
Jul 2016 800pp Edward J. Farmer
9781627080705 Hardback £275.00 / €350.00 Dec 2016 380pp
ASM Handbook, Vol. 3 9781941546482 Paperback £110.00 / €120.00
Discusses the fundamentals of leak detection science and
The new 2016 edition of ASM Handbook, Volume 3: Alloy Phase technology. This book addresses threats pipelines encounter
Diagrams is a revision of the original 1992 edition. 40% of along with the underlying concepts, capabilities, and
the volume has been updated and now includes 1083 binary limitations of leak detection technology. It also develops the
systems, 1095 binary diagrams, 115 ternary systems, and applicable science, explores the available technology, shows
406 ternary diagrams. The revised volume provides a more how to monitor performance, and discusses how to maintain
complete explanation of phase diagrams and their significance and ensure consistency over time.
with the addition of new material on solid solutions and
phase transformations; thermodynamics; isomorphous, BUY NOW
eutectic, peritectic, and monotectic alloy systems; solid-state
transformations; and intermediate phases.

BUY NOW

IK International Publishing House MV Learning

ELASTICITY FOR ENGINEERS COMPOSITE MATERIALS AND STRUCTURAL
ANALYSIS
T.G. Sitharam & L. Govindaraju
Nov 2016 256pp N.G.R. Iyengar
9789385909344 Paperback £30.50 / €33.00 Jan 2016 294pp
Covers the basic principles - and the corresponding 9788130928081 Paperback £21.95 / €27.00
accompanying mathematical expressions - involved in the Examines various types of composite materials, failure
theory of elasticity, along with applications to a large variety of of laminates, characterization of composites, analysis of
problems in civil engineering. It also includes a comprehensive laminates under static and dynamic loads, higher order
range of worked examples and problems for students to theories for laminates and optimization of composite
consolidate their understanding of the fundamental principles laminates.
and illustrate their application in practical situations.
BUY NOW
BUY NOW

PNEUMATIC AND HYDRAULIC SYSTEMS
K. Hiraniya Singh

Nov 2016 355pp
9789385909337 Paperback £35.50 / €38.00
The various topics dealt with in this book are concise and self-
contained with pictorial illustrations, for easy understanding
and clear conception. Each chapter has review questions
at the end. Topics discussed include power source, storage,
transmission, service, control systems, power, circuits,
feedback, programme, disposal, electro pneumatics, actuators,
and electro-oilaulic.

BUY NOW

4

BESTSELLERS MOBILE ROBOTS FOR DYNAMIC
ENVIRONMENTS
American Society of Mechanical Engineers
Edited by Emin Faruk Kececi & Marco Ceccarelli
DESIGNS AND PROTOTYPES OF 2015 180pp
MOBILE ROBOTS 9780791860526 Hardback £135.00 / €155.00
Robotics Engineering Book Series
Edited by Marco Ceccarelli & Emin Faruk Kececi Mobile robots have been integral to the development of new
2015 202pp robotic systems for new applications, even in non-technical
9780791860472 Hardback £135.00 / €155.00 areas. Mobile robots have already been developed for such
Robotics Engineering Book Series uses as industrial automation, medical care, space exploration,
Mobile robots have been integral to the development of new surveillance, entertainment, and many other applications. This
robotic systems for new applications, even in non-technical book and its companion can be used as a graduate level course
areas. Mobile robots have already been developed for such book or a guide book for the practicing engineer.
uses as industrial automation, medical care, space exploration,
surveillance, entertainment, and many other applications. This BUY NOW
book and its companion can be used as a graduate level course
book or a guide book for the practicing engineer. PIPELINE DESIGN AND CONSTRUCTION
A Practical Approach, Third Edition
BUY NOW
Mo Mohitpour, Hossein Golshan & Alan Murray
THE ELEMENTS OF MECHANICAL DESIGN 2006 752pp, illustrations, maps
9780791802571 Paperback £205.00 / €235.00
James G. Skakoon Offers techniques for pipeline design and construction. This
2008 104pp, illustrations book presents the various elements that make up a single-
9780791802670 Paperback £32.95 / €38.00 phase liquid and gas pipeline system, including how to design,
Written by one of the authors of The Unwritten Laws of construct, commission, and assess pipelines and related
Engineering and The Unwritten Laws of Business, this book is facilities.
suitable for professionals interested in the basic principles and
practices of good mechanical design. It can help readers to BUY NOW
apply these fundamental concepts throughout their designs.
POWER PIPING
BUY NOW The Complete Guide to ASME B31.1

HOT AIR RISES AND HEAT SINKS Charles Becht IV
Everything You Know About Cooling 2013 262pp
Electronics is Wrong 9780791860144 Hardback £125.00 / €140.00
Provides background information, historical perspective, and
Tony Kordyban expert commentary on the ASME B31.1 Code requirements for
1998 240pp, Illustrations power piping design and construction.
9780791800744 Paperback £49.95 / €57.00
A collection of myths, mistakes, and “lessons learned” BUY NOW
from practicing engineers involved in the field of electronic
equipment cooling. Through anecdotes and stories, Tony
Kordyban covers the basic dimensions of heat transfer
concepts.

BUY NOW

5

ASM International TITANIUM
A Technical Guide, Second Edition
ASM HANDBOOK, VOLUME 5B
Protective Organic Coatings Matthew J Donachie
2000 381pp
Edited by Kenneth B. Tator 9780871706867 Hardback £255.00 / €275.00
2015 259pp Providing an overview of the major topics, this book provides
9781627080811 Hardback £275.00 / €350.00 a concise summary of the most useful information required to
ASM Handbook, Vol. 5B understand titanium and its alloys.
Addresses a need for comprehensive information on the part
of industrial coating users, specifiers, and contractors. Industry BUY NOW
respected authors and reviewers make this the authoritative
source for industrial coating information worldwide. UNDERSTANDING HOW COMPONENTS
FAIL
BUY NOW Third Edition

ASM HANDBOOK, VOLUME 7 Edited by Donald J. Wulpi & Brett Miller
Powder Metallurgy 2013 300pp
9781627080149 Hardback £215.00 / €250.00
Edited by Prasan K. Samal & Joseph W. Newkirk Focuses on the metallurgical and materials evaluation for
2015 850pp failure mode identification. Comprehensive information
9781627080873 Paperback £275.00 / €325.00 covering the basic principles and practices are clearly explained.
ASM Handbook, Vol. 7
Focuses on conventional powder metallurgy and includes a BUY NOW
new section on metal injection molding. The newly developed
handbook format is aimed at simplifying the understanding of Begell House, Inc.
process and property relationships by treating each metal/alloy
family in individual divisions. HANDBOOK OF HYDRAULIC RESISTANCE
Fourth Edition
BUY NOW
I.E. Idelchik
ASM HANDBOOK, VOLUME 9 2007 861pp
Metallography and Microstructures 9781567002515 Hardback £305.00 / €325.00
Resistance to flow is an important engineering subject. It is
G.F. Vander Voort applicable to every branch of engineering where flows of liquids
2004 1150pp, illustrations and gases take place. The importance of exact and true values
9780871707062 Hardback £275.00 / €325.00 of flow resistance is, primarily, a question of determining
ASM Handbooks, Vol. 9 the pumping or power requirements for any apparatus or,
A comprehensive reference that features over 30 new articles eventually, for the entire plant involved in the motion of fluid.
with substantive updates on metallographic techniques and
microstructural interpretation. BUY NOW

BUY NOW

STEEL METALLURGY FOR THE
NON-METALLURGIST

Dr. John Verhoeven
2007 228pp, illustrations
9780871708588 Hardback £130.00 / €145.00
Explains the metallurgy of steel and its heat treatment for
non-metallurgists, starting with the basics and then gradually
introducing more complex concepts involved in heat
treatment of most types of steel.

BUY NOW

6

IK International MV Learning

CONCRETE TECHNOLOGY PRINCIPLES OF PHYSICAL
METALLURGY
S.S. Bhavikatti Second Edition
2015 368pp
9789384588670 Paperback £31.50 / €36.00 Abhijit Mallick
Provides an introduction to concrete structures, the properties 2015 576pp
and requirements of constituents of concrete, including the 9788130931470 Paperback £22.50 / €36.00
role of various admixtures to get special properties. Focuses on the fundamentals of physical metallurgy, including
crystal structure and imperfections, phase equilibria, phase
BUY NOW transformations and heat treatment. Failure and corrosion
properties of materials are discussed in detail. The book also
HYDRAULICS AND PNEUMATICS highlights optical properties, diffusion, chemical bonding,
non-conventional energy resources, ceramics and composites.
Jagadeesha T.
2015 448pp BUY NOW
9789384588908 Paperback £36.50 / €39.00
Offers a comprehensive treatment of the principles of PHI Learning
hydraulics and pneumatics. The main objective is to provide
a clear understanding of the concepts underlying hydraulics
and pneumatics.

BUY NOW

Krieger Publishing Company CAD/CAM
Concepts and Applications
COMPACT HEAT EXCHANGERS
Third Edition Chennakesava R. Alavala
2013 564pp
W.M. Kays & A.L. London 9788120333406 Paperback £15.50 / €18.00
1998 352pp Coverage in this textbook includes interactive computer
9781575240602 Hardback £71.95 / €83.00 graphics, CAD, finite element analysis, numerical control,
Compiles experimental data on the basic heat transfer and flow computer numerical control, manual part programming,
friction characteristics of “compact” heat exchangers. The data computer-aided part programming, adaptive control systems,
can be applied to space heating, spacecraft heat exchangers, group technology, computer-aided process planning,
aircraft heat exchangers and various cooling systems. computer-aided planning of resources for manufacturing,
computer-aided quality control, industrial robots, cellular
BUY NOW manufacturing, lean manufacturing and computer integrated
manufacturing.

BUY NOW

FUNDAMENTALS OF
MECHANICAL ENGINEERING
Thermodynamics, Mechanics, Theory of
Machines, Strength of Materials and Fluid
Dynamics, Third Edition

G.S. Sawhney
2015 960pp
9788120351332 Paperback £22.95 / €27.00
Explains the fundamentals of mechanical engineering in the
area of thermodynamics, mechanics, theory of machines,
strength of materials and fluid dynamics. This revised edition
includes a new chapter on fluid dynamics.

BUY NOW

7

IRONMAKING AND STEELMAKING SME
Theory and Practice
FUNDAMENTALS OF COMPOSITES
Ahindra Ghosh & Amit Chatterjee MANUFACTURING
2012 492pp Materials, Methods, and Applications,
9788120332898 Paperback £16.50 / €20.00 Second Edition
This authoritative account covers the entire spectrum from
iron ore to finished steel, from the history of iron and steel A.Brent Strong
production, through to transport phenomena, mixing and 2007 640pp, illustrations
mass transfer in ironmaking and steelmaking processes, and 9780872638549 Hardback £125.00 / €145.00
finally to modern developments in blast furnaces. Describes advances, key information, case studies, and
examples that can broaden your knowledge of composites
BUY NOW materials and manufacturing methods.

MATERIALS SCIENCE AND ENGINEERING BUY NOW
A First Course, Sixth Edition
GEAR HOBBING, SHAPING AND SHAVING
V. Raghavan A Guide to Cycle Time Estimating and
2015 488pp Process Planning
9788120350922 Paperback £11.50 / €14.00
Provides a thorough analysis of the subject in an easy-to- Robert Endoy
read style. It begins by examining the background topics in 1990 180pp
chemical equilibrium, kinetics, atomic structure and chemical 9780872633834 Paperback £11.50 / €13.00
bonding. Then follows a detailed discussion of the structure Everyone involved in gear design and production will benefit from
of solids, crystal imperfections, phase diagrams, solid-state the practical guidelines in this book. Refer to it on-the-job for tips
diffusion and phase transformations. on process selection, process planning, cycle time formulas and
calculations, speeds and feeds, and volume considerations.
BUY NOW
BUY NOW

SALES REPRESENTATION & CONTACTS 8

EUROPE, MIDDLE EAST & AFRICA MIDDLE EAST SOUTH EAST ASIA

UK & REPUBLIC OF IRELAND Bahrain, Iran, Iraq, Israel, Jordan, Brunei, Malaysia, Singapore
Kuwait, Lebanon, Oman, Palestine, Raymond Lim
UK & Republic of Ireland Qatar, Saudi Arabia, Syria, Turkey, [email protected]
Graeme Innes-Johnstone United Arab Emirates, Yemen
graeme.innes-johnstone David Atiyah Cambodia, East Timor, Indonesia,
@eurospangroup.com [email protected] Laos, Philippines, Thailand, Vietnam
Melvin Choo
London AFRICA [email protected]
Darryl Richards
[email protected] Algeria, Egypt, Libya, Morocco, Tunisia FAR EAST

CONTINENTAL EUROPE David Atiyah China, Hong Kong, Taiwan
[email protected]
Denmark, Finland, Iceland,
Norway, Sweden Angola, Ghana, Kenya, Nigeria, Sudan, Benjamin Pan
David Towle Uganda, Zambia, Zimbabwe [email protected]
[email protected]
Guy Simpson Japan
Bosnia Herzegovina, Bulgaria, Croatia,
Czech Republic, Estonia, Georgia, [email protected] Tim Burland
Hungary, Latvia, Lithuania, Poland,
Romania, Russia, Serbia, Slovakia, Botswana, Namibia, Lesotho, South [email protected]
Slovenia, Ukraine Africa, Swaziland
László Horváth Chris Reinders Mark Gresham
[email protected] [email protected]

Austria, Belgium, France, Germany, [email protected] South Korea
Italy, Luxembourg, Netherlands,
Portugal, Spain, Switzerland ChongHo Ra
Michelle Zappa
[email protected] ASIA-PACIFIC [email protected]

Greece CENTRAL ASIA AUSTRALASIA & OCEANIA
Charles Gibbes
[email protected] Afghanistan, Kazakhstan, Kyrgyzstan, Australia, New Zealand, Oceania
Tajikistan, Turkmenistan, Uzbekistan
All other European countries Emma White
Graeme Innes-Johnstone Marc Bedwell [email protected]
graeme.innes-johnstone
@eurospangroup.com [email protected] LATIN AMERICA & THE CARIBBEAN

SOUTH ASIA Craig Falk
Bangladesh, Bhutan, India, Maldives, [email protected]
Nepal, Sri Lanka

Vinod Vasishtha
[email protected]

Pakistan

Tahir Lodhi
[email protected]

Due to currency fluctuations and publisher price changes, prices charged may vary from those listed.

CUSTOMER SERVICES DESPATCH INFORMATION OTHER ENQUIRIES

Tel: +44 (0)1767 604972 Standard delivery per order - Tel: +44 (0)20 7240 0856
Fax: +44 (0)1767 601640 UK £3.50 Fax: +44 (0)20 7379 0609
[email protected] Continental Europe €6.00 [email protected]
Middle East US$15.00 3 Henrietta Street
Africa US$15.00 Covent Garden
Asia-Pacific US$15.00 London WC2E 8LU, UK
Latin America & the Caribbean US$15.00
Faster delivery options available on request.

Eurospan|group