testing

DASAR D

ICP MULTIPLIERS

Category Item Desc

4 Human Capital Development

a) Technical Transfer, Skills and Comp
Services (e.g. on design, systems integ
development and Professional Certifi

b) On Job Training (International/Local P
* Attachment at OEM. All cost involve

c) Knowledge Transfer and Skills Developm
classroomactivities for design, engine

d) Non-Technical Transfer and Skills Dev

e) Training and Skills Development Cour

f) Higher Learning Placement Program at L
PhD)
* Tuition fee, allowances, accommod

5 Incidental/Others

5.1 Flight ticket, accommodation, allowances

3-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

cription Direct Indirect

petency Development for Professional 4 4
gration, platform technology, engineering & 2 3
ication etc.) 3 3
2 2
Placement) 2 2
e including flight ticket, accommodation, etc N/A 2
ment for Professional Services (e.g.
eering and development etc.) 1
velopment

rses-general

Local/International Institution (masters,

dation, etc

s, etc. 1

-3

DASAR D

Technology Readiness Levels (TRL) – definitio

TRL

1. Basic principles observed and This is the lowest "level" where scien
reported

2. Technology conceptand/or Next level of maturation, practical app
application formulated level, the application is still speculativ

3. Analytical and experimental At this step, active (R&D) is initiated. T
critical function and/or appropriate context and laboratory-b
characteristic proof of concept correct. Should constitute POC validat

Following successful POC work, basic

4. Component and/or breadboard will work together to achieve concept

validation in laboratory This validation must be devised to su

environment consistent withthe requirements of p

the eventual system: it could be comp

5. Component and/or breadboard At this level, the fidelity of the compon
validation in relevant basic technological elements must be
environment total applications (component-level,
somewhat realistic environment.

6. System/subsystem model or A major step in the level of fidelity of t
prototype demonstration in a a representative model or prototype
relevant environment (ground or discrete component level bread-boar
space) 'relevant environment' is the environ
space.

7. System prototype TRL 7 is a significant step beyond TRL 6
demonstration in a space environment. The prototype should b
environment demonstration must take place in spa

8. Actual system completed and In almost all cases, this level is the end
'flight qualified' through test and might include integration of new tech
demonstration (ground orspace)

9. Actual system 'flight proven' In almost all cases, the end of last 'bug
through successful mission integration of new technology into a
operations improvement of ongoing or reusable s

3-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

on by NASA

Description

ntific research begins to be translated into applied R&D.

plications of those characteristics can be 'invented' or identified. At this
ve: no experimental proof or detailed analysis to support the conjecture.
This must include both analytical studies to set the technology into an
based studies to physically validate that the analytical predictions are
tionof the applications/concepts formulatedat TRL 2.
c technological elements must be integrated to establish that the "pieces"
t-enabling levels of performance for a component and/or breadboard.
upport the concept that was formulated earlier, and should also be
potential system applications. The validationis "low-fidelity" comparedto
posed of ad hoc discrete components in a laboratory.
nent and/or breadboard being tested has to increase significantly. The
e integrated with reasonably realistic supporting elements so that the
, sub-system level, or system-level) can be tested in a 'simulated' or

the technology demonstration follows the completion of TRL 5. At TRL 6,
e system or system - which would go well beyond ad hoc, 'patch-cord' or
rding - would be tested in a relevant environment. At this level, if the only
nment of space, then the model/prototype must be demonstrated in

6, requiring an actual system prototype demonstration in a space
be near or at the scale of the planned operational system and the
ace.
d of true 'system development' for most technology elements. This
hnology into an existing system.
g fixing' aspects of true 'system development'. This might include
an existing system. This TRL does not include planned product
systems.

-4

DASAR D

LOCAL CONTENT MULTIPLIERS

Cat (k) Item i) Design and systems inte
ii) High Skill Works
A Local Services/Sourcing
* Personnel that requir
B Local Product iii) Installation, Assembly,
iv) General Works
C Plant Facility i) Parts & Component, Ma
D Logistics
a) Custom Made
E Partnership/Consortium b) Off The Shelves
F Professional and High i) Plant equipment and m
Technical Skill Employment ii) Tools, Jigs and Fixtures
i) Integrated logistic supp
ii) Forwarding, haulage an
iii) Local Insurance
Work scope awarded to Lo
The minimum skill require

3-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

Description Multiplier

egration work 4
re certification such as TIG welding, diving, NDT, etc 3
Testing, Commissioning and Project Management
2
ain Equipment, Test Equipment 1

machinery 3
1
port (ILS) 3
nd transportation, storage & warehouse 4
1
ocal Partner 1
ed is certificate 1
1
1

-5

DASAR D

Penalty Calculation

PENALTY CALCULATION

• Penalty will be calculated based on un-achievemen
Non-LC

Program

Where;

Unachieved ICV (RM)

Program

= Unachieved Non-LC ICV (RM) + Un

4-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

ATTACHMENT 4
nt of the Mandatory ICV for both LC and

m

nachieved LC ICV (RM)

-1

DASAR D

Penalty Calculation

1. Example of penalty calculation for Un-achie
Total Mandatory ICV = RM 500mil
Non-LC Obligation = 70% × RM 500 mil =
LC Obligation = 30% × RM 500 mil = RM
Upon PIA,
Total Non-LC ICV verified = RM 300 mil
Total LC ICV verified = RM 150 mil
Total Unachieved Non-LC ICV = RM 350
Total Unachieved LC ICV = RM 150 mil –
Therefore, penalty impose:
Penalty (RM) = (Unachieved Non-LC
× Performance Bond
= (RM 50 mil + RM 0 m
= RM 2.5 mil

4-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

evement of the Non-LC only
= RM 350 mil
M 150 mil

mil – RM 300 mil = RM 50 mil
– RM 150 mil = RM 0 mil
ICV (RM)+ Unachieved LC ICV (RM) )
(%)
mil) × 5%

-2

DASAR D

Penalty Calculation

2. Example of penalty calculation for Un-achi
Total Mandatory ICV = RM 500mil
Non-LC Obligation = 70% × RM 500 mil =
LC Obligation = 30% × RM 500 mil = RM

Upon PIA,
Total Non-LC ICV verified = RM 450 mil
Total LC ICV verified = RM 100 mil

Total Unachieved Non-LC ICV = RM 450
= + RM

Total Unachieved LC ICV = RM 150 mil –
Therefore, penalty impose:
Penalty (RM) = (Unachieved Non-LC

Performance Bond (
= (RM 0 mil + RM 50
= RM 2.5 mil

4-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

ievement of the LC only
= RM 350 mil
M 150 mil

mil – RM 350 mil
M 100 mil (exceed Non-LC Obligation)
– RM 100 mil = RM 50 mil
C ICV (RM)+ Unachieved LC ICV (RM) ) ×
(%)

mil) × 5%

-3

DASAR D

Penalty Calculation

3. Example of penalty calculation for Un-achi
Total Mandatory ICV = RM 500mil
Non-LC Obligation = 70% × RM 500 mil =
LC Obligation = 30% × RM 500 mil = RM
Upon PIA,
Total Non-LC ICV verified = RM 300 mil
Total LC ICV verified = RM 100 mil
Total Unachieved Non-LC ICV = RM 350
Total Unachieved LC ICV = RM 150 mil –
Therefore, penalty impose:
Penalty (RM) = (Unachieved Non-LC
× Performance Bond
= (RM 50 mil + RM 50
= RM 5 mil

4-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

ievement of both Non-LC and LC
= RM 350 mil
M 150 mil

0 mil – RM 300 mil = RM 50 mil
– RM 100 mil = RM 50 mil
ICV (RM)+ Unachieved LC ICV (RM) )
(%)
mil) × 5%

-4

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

ATTACHMENT 5

KLAUSA PROGRAM KOLABORASI INDUSTRI (ICP) DI BAWAH PEROLEHAN
KEMENTERIAN-KEMENTERIAN DAN AGENSI-AGENSI KERAJAAN

(a) Pihak Pembekal hendaklah melaksanakan program ICP melalui Perjanjian Utama ICP
yang menggariskan obligasi Kerajaan dan pihak Pembekal berkenaan pelaksanaan
ICP.

(b) Pihak Pembekal dikehendaki untuk menandatangani Perjanjian ini dan Perjanjian
Utama ICP secara serentak. Sekiranya Perjanjian Utama ICP tidak dapat
ditandatangani secara serentak dengan Perjanjian ini, Perjanjian Utama ICP
hendaklah ditandatangani sebelum Pembayaran Pertama sebagaimana dinyatakan
dalam Jadual X (Jadual Pembayaran).

(c) Pihak Pembekal bersetuju bahawa Kerajaan berhak untuk menangguhkan
Pembayaran Ke-empat seperti yang dinyatakan dalam Jadual X (Jadual Pembayaran)
sekiranya pihak Pembekal gagal/mungkir/abai di dalam mematuhi klausa (b) di atas.

KLAUSA BON PELAKSANAAN

(a) Sebagai jaminan bagi pelaksanaan obligasi-obligasi Pembekal bagi Program
Kolaborasi Industri (Industrial Collaboration Programme-ICP), Bon Pelaksanaan
yang dikemukakan oleh Pembekal seperti yang dinyatakan di dalam Jadual X (Bon
Pelaksanaan) Perjanjian ini hendaklah digunapakai sebagai Bon Pelaksanaan bagi
Program Kolaborasi Industri (Industrial Collaboration Programme-ICP) sekiranya
pihak Pembekal gagal/mungkir/abai di dalam menjalankan obligasi Pembekal
berkenaan pelaksanaan ICP.

5-1

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

(b) Bon Pelaksanaan tersebut hendaklah kekal sah laku:
(i) bermula dari tarikh ia dikeluarkan sehingga dua belas (12) bulan selepas
tamat Tempoh Tanggungan Kecacatan (Defect Liability Period)
(ii) atau selepas pengeluaran Perakuan Siap Memperbaiki Kecacatan (Certificate
of Completion of Making Good Defect), mengikut mana yang terkemudian;
atau
(iii) sekiranya Perjanjian ini ditamatkan, sehingga dua belas (12) bulan selepas
Perjanjian Utama ICP ditamatkan atau dua belas (12) bulan selepas tarikh tamat
tempoh Perjanjian Utama ICP, mengikut mana yang terkemudian.
(selepas ini dirujuk sebagai “Tempoh Sah Bon Pelaksanaan”)

(c) Sekiranya tuntutan atau potongan dibuat oleh Kerajaan ke atas Bon Pelaksanaan
tersebut yang menyebabkan jumlah jaminan bank/insurans tersebut berkurangan
daripada jumlah yang dinyatakan di Klausa (a) di atas, maka Pembekal hendaklah
mengemukakan Bon Pelaksanaan tambahan supaya nilai Bon Pelaksanaan yang
dipegang oleh Kerajaan bersamaan dengan nilai yang dinyatakan di bawah Klausa (a)
di atas.

5-2

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

INDUSTRIAL COLLABORATION PROGRAMME (ICP) CLAUSE UNDER THE
PROCUREMENT BY GOVERNMENT MINISTRIES OR AGENCIES

(a) The Supplier shall implement ICP through the First Tier ICP Agreement which
outlines the obligations of the Government and the Supplier regarding to the
implementation of ICP.

(b) The Supplier shall execute this Agreement and the First Tier ICP Agreement
simultaneously. In the event the First Tier ICP Agreement cannot be executed
simultaneously with this Agreement, the First Tier ICP Agreement shall be executed
prior to first payment as specified in Schedule X (Schedule of Payment)

(c) The Supplier agrees that the Government shall be entitled to defer the fourth payment
as specified in Schedule X (Schedule of Payment) in case of the Supplier’s failure to
comply with this clause.

PERFORMANCE BOND CLAUSE

(a) As a security for the due and successful performance and fulfilment of all its
obligations under Industry Collaboration Program (ICP), the duly executed
Performance Bond issued by the Supplier which is attached in Schedule X
(Performance Bond) of this Agreement shall also be used as a Performance Bond for
Industry Collaboration Program (ICP) in the event that the Supplier fails / default /
neglect in carrying out the obligations in respect of the implementation of the ICP
Program.

5-3

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

(b) The Performance Bond shall remain and continue to be valid —
(i) from the date of its issuance up to twelve (12) months after the end of the
Defect Liability Period or after the issuance of the Certificate of Completion
of Making Good Defect, whichever is later; or
(ii) in the event this Agreement is terminated, up to twelve (12) months after the
First Tier ICP Agreement is terminated or twelve (12) months after the expiry
date of the First Tier ICP Agreement, whichever is later,
(hereinafter referred to as the “Performance Bond Validity Period”).

(c) In the event that any claim or deduction made by the Government on the Performance
Bond as a result of the breach by the Supplier, reduce the value of the bank guarantee
/ insurance stated in Clause (a) above the Supplier shall submit an additional
Performance Bond to maintain the value of the Performance Bond specified under
Clause (a) above.

5-4

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

KLAUSA PROGRAM KOLABORASI INDUSTRI (ICP) DI BAWAH PEROLEHAN
SYARIKAT-SYARIKAT PEGANGAN KERAJAAN (GOC)

(a) Pihak Pembekal hendaklah melaksanakan program ICP melalui Perjanjian Utama
ICP yang menggariskan obligasi Kerajaan Malaysia, [Syarikat Pegangan Kerajaan]
dan pihak Pembekal berkenaan pelaksanaan ICP.

(b) Pihak Pembekal dikehendaki untuk menandatangani Perjanjian ini dan Perjanjian
Utama ICP secara serentak. Sekiranya Perjanjian Utama ICP tidak dapat
ditandatangani secara serentak dengan Perjanjian ini, Perjanjian Utama ICP
hendaklah ditandatangani sebelum Pembayaran Pertama sebagaimana dinyatakan
dalam Jadual X (Jadual Pembayaran).

(c) Pihak Pembekal bersetuju bahawa [Syarikat Pegangan Kerajaan] berhak untuk
menangguhkan Pembayaran ke-_____ seperti yang dipersetujui oleh [Syarikat
Pegangan Kerajaan] dan Kerajaan Malaysia sekiranya pihak Pembekal
gagal/mungkir/abai di dalam mematuhi klausa (b) di atas.

KLAUSA BON PELAKSANAAN

(a) Sebagai jaminan bagi pelaksanaan obligasi-obligasi Pembekal bagi Program
Kolaborasi Industri (Industrial Collaboration Programme-ICP), pihak Pembekal
hendaklah mengemukakan kepada pihak [Syarikat Pegangan Kerajaan], dalam
tempoh masa Empat Belas (14) hari daripada tarikh Perjanjian Utama ICP, suatu
Bon Pelaksanaan yang tidak boleh dibatalkan bernilai lima peratus (5%) daripada
Nilai Kontrak Perbekalan sebanyak Ringgit Malaysia XXX (RM XXX) sahaja
di dalam bentuk jaminan bank/insurans yang dikeluarkan oleh bank atau syarikat
insurans yang berlesen dan beroperasi di Malaysia

5-5

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

(b) Bon Pelaksanaan tersebut hendaklah dituntut sekiranya pihak Pembekal
gagal/mungkir/abai di dalam menjalankan obligasi Pembekal berkenaan
pelaksanaan ICP

(c) Bon Pelaksanaan tersebut hendaklah kekal sah laku:
(i) sekiranya Perjanjian ini ditamatkan, sehingga dua belas (12) bulan selepas
Perjanjian Utama ICP ditamatkan atau dua belas (12) bulan selepas tarikh tamat
tempoh Perjanjian Utama ICP, mengikut mana yang terkemudian.
(selepas ini dirujuk sebagai “Tempoh Sah Bon Pelaksanaan”)

(d) Sekiranya tuntutan atau potongan dibuat oleh [Syarikat Pegangan Kerajaan] ke atas
Bon Pelaksanaan tersebut yang menyebabkan jumlah jaminan bank/insurans
tersebut berkurangan daripada jumlah yang dinyatakan di Klausa (a) di atas, maka
Pembekal hendaklah mengemukakan Bon Pelaksanaan tambahan supaya nilai Bon
Pelaksanaan yang dipegang oleh [Syarikat Pegangan Kerajaan] bersamaan dengan
nilai yang dinyatakan di bawah Klausa (a) di atas.

5-6

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

INDUSTRIAL COLLABORATION PROGRAMME (ICP) CLAUSE UNDER THE
PROCUREMENT BY GOVERNMENT OWNED COMPANIES (GOC)

(a) The Supplier shall implement ICP through the First Tier ICP Agreement which
outlines the obligations of the Government, GOC and the Supplier regarding to the
implementation of ICP.

(b) The Supplier shall execute this Agreement and the First Tier ICP Agreement
simultaneously. In the event the First Tier ICP Agreement cannot be executed
simultaneously with this Agreement, the First Tier ICP Agreement shall be executed
prior to first payment as specified in Schedule X (Schedule of Payment)

(c) The Supplier agrees that the GOC shall be entitled to suspend payment of _______
as agreed by the GOC or the Government of Malaysia if the supplier
fails/deny/ignore in compliance with clause (b) above.

PERFORMANCE BOND CLAUSE

(a) As a security for the due and successful performance and fulfilment of all its

obligations under the Supplier shall furnish

the GOC within fourteen (14) days from the date of the First Tier ICP Agreement,

an irrevocable performance bond for the amount of Ringgit Malaysia XXX (RM

XXX) only being equivalent to five percent (5%) of the total Contract Sum in

the form of a bank guarantee/insurance issued by the bank (onshore) and licensed

insurance company which operated in Malaysia (Performance Bond).

(b) Performance Bond shall be called upon in the event that the Supplier fails / default
/ neglect in carrying out the obligations in respect of the implementation of the ICP
Program.

(c) The Performance Bond shall remain and continue to be valid —

5-7

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

(i) in the event this Agreement is terminated, up to twelve (12) months after the
First Tier ICP Agreement is terminated or twelve (12) months after the expiry
date of the First Tier ICP Agreement, whichever is later,
(hereinafter referred to as the “Performance Bond Validity Period”).

(d) In the event that any claim or deduction made by the GOC on the Performance Bond
as a result of the breach by the Supplier, reduce the value of the bank guarantee /
insurance stated in Clause (a) above the Supplier shall submit an additional
Performance Bond to maintain the value of the Performance Bond specified under
Clause (a) above.

5-8

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

ATTACHMENT 6

RELIEF OF OBLIGATION LETTER
Reference No. :
Date :

To: ICP PROVIDER (Full name and address)

Dear Sir,

RELIEF OF OBLIGATION: INDUSTRIAL COLLABORATION PROGRAM (ICP)
FOR PROCUREMENT OF XXXXX

This is in reference to the First Tier ICP Agreement for the procurement of
_______________________________________, Reference No. ________________, signed
on _________________ between ______________________ (ICP Provider), and the
Government of Malaysia.

2. It is acknowledged that (ICP Provider) has fully
implemented ICP Projects as follows:

i) Project 1: __________________________________ ii)
Project 2: __________________________________ iii)
Project 3: __________________________________ iv)
Project n: __________________________________

3. It is also acknowledged ______________________ (ICP Provider) has fulfilled the
obligation requirements set out in the Policy and Guidelines on ICP, and has achieved ICP
Credit Value of RM________________. This amount generates an excess of
RM__________________ (as compared to the Mandatory ICP Credit Value of
RM__________________) which entitled for ICP Credit Banking.

6-1

DASAR DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

4. In this regard, the Government of Malaysia hereby reliefs the ICP obligations of
______________________ (ICP Provider) for the above-stated procurement effective from the
date of this letter.

5. The Government of Malaysia wish to thank you for the cooperation and commitment in
implementing the ICP. Documents and records related to the implementation of this ICP
programme are being kept by Technology Depository Agency Berhad (TDA) for future
reference.

Thank you.

“SERVING THE NATION”

Yours sincerely,

.....................................................
Name
Position
Ministry of Finance
On behalf: Chairman of MIEC/ Appointed Approving Authority

6-2

DASAR D

MALAYSIAN ICP MANAGEMENTFRAM

Pre-Implementation

ICP ICP ICP ICP
Requirement Proposal Projects Agreem
Document
and Maximize socio Agree on
Articulate ICP Evaluation economics ICP
strategies and returns and
formation of Proposal support onto deliverab
relevant ICP knowledge and expe
committees and based impact w
identify economy time & c
potential limits
recipients

Market and ICP Recipient Audit
Industry Database
ICP Strat

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

LAMPIRAN 1

MEWORK

Implementation Post-Implementation

P ICP Monitoring & ICP ICP
ments Reporting Verification Program

n the ICP monitoring Assessment on Relief from
on agreed the obligation
bles programme performance of upon
ected ICP Programme completion
within Ensure
cost performance
within agreed
parameters

Surveillance Audit Post Implementation
Audit

tegy

-1

DASAR D

SUMMARY OF MALAYSIAN ICP MAN

Start

Government Pre-Implementatio
Procurement (Clause 4.2)

Implementation
(Clause 4.3)

Post Implementati
(Clause 4.4)

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

NAGEMENT FLOW CHART

Approval Pre-ICP
(Clause 5)
on

Penalty
Process
n (Clause 2.4.6)

Yes No

ion Penalty? Relief of

Obligation

(Clause 4.4.3)

End
-2

DASAR D

Process Flow (Carta Alir):

TASK ICP RESPONSIB
Provider
Agency IMU

Start

Develop ICP Strategy Procurement S
Document (ISD)

ICP Management Unit IMU
(IMU) establishment Appointment

ICP Committee (IC) IC Formation
formation

ICP Requirement IRD Development
Document (IRD)
Development

Tender Issuance

A

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

BILITIES IC MIEC DESCRIPTION

TDA Procurement triggered
by Procuring Agency.
ICP
Strategies TDA is to develop the ICP
Strategy Document (ISD)
to be used for the ICP
Requirement Document
(IRD) development.

With assistance from
TDA, the Procuring
Agency shall appoint ICP
Management Unit (IMU)
and form an ICP
Committee (IC).

With assistance from
TDA, the IMU shall
develop an IRD for
approval by IC.

-3

DASAR D

RESPONSI

Provider

ICP

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

IBILITIES

DESCRIPTION

-4

DASAR D

RESPONSIB

Provider

Agreemen
Implementation
S

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

BILITIES

Surveillance
Rep

-5

DASAR D

RESPONSIB

Provider

Im
Programme

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

BILITIES

mplementation

Banking

-6

DASAR D

RESPONSIB

Provider

Pr
Imp

1-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

BILITIES

plementation

-7

DASAR D

ICP Credit Value (ICV) Calculation

1. ICV PROGRAM ∑ ICV

ICVProgram i=1 Projects (i)

Where:
n is number of agree

Program is defined either one of the followin

EEP = Direct and/or Indirect Ec

Offset = Direct and/or Indirect Of

CT = Countertrade

ICV ∑ ICVDirect EEP proj
EEP
i=1
ICV
Offset ∑ ICVDirect Offset pro

ICV i=1
CT
NV
CT

2-

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

LAMPIRAN 2

ed projects

ng;

conomic Enhancement Program
ffset

ject (i) ∑ ICVIndirect EEP project (i)
oject (i)
i=1

∑ ICVIndirect Offset project (i)

i=1

-1

DASAR D

ICP Credit Value (ICV) Calculation

2. ICV DIRECT

ICV ∑ ICVDirect project (i)
Direct Offset/EEP
i=1
ICV
Direct project ∑ Non-LC

ICV

[

where

NV = Nominal Value is the actual
LC = Local Content
M Category = Multiplier based on Catego
M Cat(k) = Multiplier based on Cat A, C

LC Multiplier table

* The formula is applicable for both EEP and O

2-2

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

∑ ICVLC [ ]M Cat(k)

]M Category

l cost of the proposed project

ory as specified in the Multiplier table
Cat B, Cat C, Cat D, Cat E and Cat F as per

Offset

2

DASAR D

ICP Credit Value (ICV) Calculation

3. ICV INDIRECT

ICV ∑ ICV

; ICV ∑

Indirect project ]M Category × (1 + µ)

∑= ICVNon-LC

= ∑ [NV

where

2-3

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

] + ∑ [NV ]× M ×Cat(k) (1 + µ)

3

DASAR D

ICP Credit Value (ICV) Calculation

3.1 Impact Coefficient, µ

Impact coefficient derived from:
• Programs that support government’s initiatives in

GNI growth;
• Programs that support high value jobs creation and

human capital capabilities development;
• Programs that support increase of investment

portfolios

2-4

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

• Prioritized economic activities
• Prioritized Growth Zones (ETP, NKEA,

Malaysia Plan, Industrial Master Plan
etc.)

4

DASAR D

3.2 Criteria for µ entitlement

12 NKEA FOCUSING CORR
1. Oil & Gas 1. Iskandar Malay
2. Palm oil and related
2. Northern Corri
products Region
3. Financial services
4. Wholesale & Retail 3. East Coast Eco
5. Tourism 4. Sarawak Corrid
6. Information & Comm
Energy
technology 5. Sabah Develop
7. Education
8. Electrical & Electronic
9. Business Services
10. Private Healthcare
11. Agriculture
12. Greater K. Lumpur

Criteria must contain at least one of the factors.
(NKEA ‘OR’ CORRIDOR ‘OR’ OBJECTIVE)

2-5

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

RIDORS ICP OBJECTIVES
ysia
idor Economic 1. Foster strategic local and
international partnership
o. Region
dor Renewable 2. Maximize the usage of local contents

pment Corridor 3. Establish a sustainable Malaysian
industrial, economic and
technological base, with strategic
capabilities development and
industrial participation in the global
supply chain

4. Technology Acquisition,
Development and Diffusion

5. Collaborate in Strategic (R&D&C)
projects

6. Facilitate investments and
collaborate in Strategic Human
Resource Development (HRD)
initiatives.

5

DASAR D

ICP Credit Value (ICV) Calculation

3.3 Example of ICV calculation:

3.3.1 Case 1: Project title: Project Financing for C
Assuming an investment of RM100 mil to suppor
which aim to add value to the palm oil industry by
partnership.
Solution:
Nominal value = RM 100 mil
Applicable for µ (30% NKEA, 30% Economic Co
Objective)
Multiplier = 5 (cash investment, project financin

[ICV = NV × M Category × (1
Indirect
project

= [RM 100 mil × 5 × (1+0
= RM 750 mil

2-6

DAN GARIS PANDUAN PROGRAM KOLABORASI INDUSTRI (ICP) DI DALAM PEROLEHAN KERAJAAN

Company A (Investment):

rt project located in Sabah Development Corridor
y fostering strategic local and international

orridor, and 40% µ = 0.5 × (0.3+0.3+0.4)
ng) µ = 0.5 × 1
µ = 0.5

1 + µ)]

0.5)]

6