Typical Roof Detail-Roof Detail

1 2 34
C
autodesk

C Architectural

420x330mm Double Roman interlocking tiles on 38x38mm "SA Desktop
Pine" tiling battens spaced at 380 centres on "SA Pine"
Gangnailed roof truss as per engineers specifications. General notes

114x50mm "SA Pine" Gangnailed roof truss spaced
between as per engineer.

38x114 "SA Pine" tie beam. At end placed on
38x114mm wall plate as detailed.

B 38x38mm "SA Pine" brandering on B
6.4 thick gypsium ceiling. A 6mm
Gypsium plaster skim coat -WHERE TRADE NAMES ARE SPECIFIED EQUAL OR APPROVED
underneath. PRODUCTS MAY BE USED
-ALL STEELWORK TO BE GALVANIZED
270 External cavity wall to be plastered. -CONTRACTORS AND SUB CONTRACTORS ARE TO CHECK ALL
DIMENSIONS AND LEVELS ON SITE PRIOR TO COMMENCING WORK
80mmx55mm Gutter fixed to Asbestos AND/OR ORDERING MATERIALS
Fascia. At gutter end: 76mm x 1.27mm -FIGURED DIMENSIONS TO BE TAKEN PREFERENCE TO SCALING AND
round aluminium down connected to LARGE SCALE DETAILS ARE TO SUPERCEDE SMALL SCALE
Pre-painted aluminium straps at 1000mm -ANY DISCREPANCIES IN ANY OF THE DOCUMENTATION IS TO BE
centres fixed to wall with nail plugs. REFERRED TO THE ARCHITECT PRIOR TO EXECUTION OF WORK AND
ORDERING OF MATERIALS
Double Pre-cast concrete lintels forming a
soffit for a cavity wall TYPICAL ROOF DETAIL

A SECTION & ANNOTATION
1
A

DETAIL AA

Scale 1:16

2 A1.0

34