INTUMESCENT PROTECTIVE COATINGS
STANCOLAC Top Coat NULLIFIRE Intumescent Basecoat STANCOLAC Primer 2
Primer Intumescent Basecoat STANCOLAC Primers are designed to protect the surface of structural steel from corrosive attack. They also provide a suitable key onto which a NULLIFIRE intumescent coating can be applied. It is important to use products that have been tested together for compatibility. Top Coat Smooth hardwearing finish to seal the basecoat, which protects from bumps, cuts & accidental damage. The decorative aspect of the top seal provides an aesthetically attractive appearance. The intumescent coating is applied to the correct thickness to provide the specified level of fire protection. Nullifire leads the way in intumescent basecoat technology. Protective Primer Intumescent Basecoat Top Coat Combine STANCOLAC Primers & Top Coats with NULLIFIRE Intumescent Basecoats to provide a complete system for fire protection and then decoration of structural steel. STANCOLAC products are tested for compatibility to minimize the risk of problems occuring on site. 3
Step 1: Primer Choice 812 EPOXY PRIMER Two component, anticorrosive, epoxy primer for steel constructions. It presents excellent adhesion, flexibility and high anticorrosive protection. It can be recoated with any type of STANCOLAC coating. Certified by European Institute. Packaging: 24kg (A:20kg, B:4kg) Mixing Ratio: A:B - 5:1 per weight Consumption: 7-8 m² / kg / 50 μm Thinner: 1131-1120-1015 Shades: Grey, Red Oxide, White 4
323 ALKYD PRIMER High quality alkyd, anticorrosive primer, suitable for the protection of metallic surfaces. It is the professional solution for industrial buildings, bridges etc. Quick-drying, easily applied, without creating an overspray. Certified by European Institute. 914 VINYL MASTIC EPOXY Two component vinyl epoxy coat with excellent adhesion to galvanized, stainless steel and non-ferrous metals. Provides high adhesion and protection of poorly prepared surfaces. Packaging: 27kg Consumption: 8-9 m² / kg / 50 μm Thinner: 1121-1120-1015-1124 Shades: Grey, Red Oxide, Black, White Packaging: 25kg (A:20kg, B:5kg) Mixing Ratio: A:B - 4:1 per weight Consumption: 4,75 m² / kg / 100 μm Thinner: 1131-1120 Shades: Unlimited 5
Step 2: Intumescent Choice SC803 SC803 has been designed to lead the market in all aspects of 60 to 90 minute fire protection. SC803 displays excellent spraying characteristics, making it the product of choice for specialist fire protection contractors. 90 mins 6 Type: On-site Classification: C1, C2, C3 Application area: Internal, Semi-exposed Fire rating: 30 minute, 60 minute, 90 minute
Product Overview SC803 Intumescent Coating is a water-based, white, thin film intumescent coating for the protection of structural steelwork. Optimised to provide 60 minutes fire resistance to “I” section beams, columns, hollow columns and hollow beams. Limited 90 minute protection is also available. Advantages at a glance: • Ultra low VOC • Water based • Market leading loadings • Compatible with a wide range of STANCOLAC Primers and topcoats • Easy to apply Properties (typical values) Specific gravity: 1.38 ± 0.02 Volume solids: 69% ± 3% VOC: 0.5 g/l 7
Step 2: Intumescent Choice SC902 is an innovative patented intumescent coating delivering ground breaking performance for the protection of internal, semi-exposed, and external steelwork. Suitable for both on-site and off-site work. Fast Track Intumescent Coating 120 mins SC902 8 Type: On-site, Off-site Classification: C1, C2, C3, C4, C5 Application area: Internal, Semi-exposed, External Fire rating: 30 minute, 60 minute, 90 minute, 120 minute
Exposure Scenario ISO 12944 C1 C2 C3 C4 C5 Z1/Y Y/X X n/a Z2 √ √ √ √ √ ETAG SC902 Hybrid Intumescent Product Overview SC902 is a fast-track, on-site, low VOC, one-coat, high-build system, based on patented technology. Designed to provide up to 120 minutes fire resistance to “I” section beams, columns, hollow columns and cellular beams. Advantages at a glance: • Fire rating up to 120 minutes tested to BS476 and EN13381 • Fast cure: early weather resistance , shower proof within 1 hour • Achieves external durability with an approved top seal • Cures up to 0°C and fully dry by the following day • Self-priming system,up to 2 weeks post blasting • High-build potential with all rating possible in one application (up to 5000μm) Properties (typical values) Specific gravity: Part A: 1.55 ±0.02, Part B: 0.99 ±0.01, Mixed: 1.46 ±0.02 Volume solids: 85% ±3% VOC: 137 g/l Mix ratio: By weight 100:12, by volume 5.6:1 Pot life: Minimum 60 minutes 9
Step 3: Top Coat Choice 5008 - PU Aliphatic polyurethane, high solids coating. Ideal for heavy industrial constructions. It presents high gloss, weather and yellowing resistance. Certified by European Institute. Packaging: 25kg (A:20kg, B:5kg) Mixing Ratio: A:B - 4:1 per weight Consumption: 9 m² / kg / 50 μm Thinner: 1115-2540-1131 Shades: Unlimited METALUX Quick-drying, anticorrosive, alkyd coating for steel structures. It presents excellent mechanical and chemical resistance, and strong adhesion. Certified by European Institute. Packaging: 24kg Consumption: 8-9 m² / kg / 50 μm Thinner: 1121-1120-1015-1124 Shades: Unlimited 10
8004 ACRYLIC PU Two component, aliphatic, acrylic polyurethane coating for the protection of metallic structures in industrial environment. It presents high gloss, great resistance to yellowing and color stability. Packaging: 25kg (A:20kg, B:5kg) Mixing Ratio: A:B - 4:1 per weight Consumption: 9 m² / kg / 50 μm Thinner: 1115-1131-2540 Shades: Unlimited 11
12 SKG INTERNATIONAL AIRPORT 2019 KOS AIRPORT 2019
13 ATHENS INTERNATIONAL AIRPORT 2019 SKIATHOS AIRPORT 2018
DIGITAL HUB PFIZER 2021 ΙΚΕΑ 2020
“SOTIRIA” HOSPITAL 2020 THRACE PLASTICS 2021
scan here Everlasting protection www.stancolac.gr