Operating Manual ergometrics ER 900 (english)

Operation Manual
ergometrics er900

Art-Nr: 475.037 J Version: 05/02

Operation Manual for Bicycle Ergometer er900

Printed in Germany.
We reserve the right of modifications due to technical development at any time and without prior notice.
Reprinting, translation and copying in any form - also in parts - is only permitted after prior written consent
by the manufacturer.

This Operation Manual is not registered for automatic update in case of possible alterations.
Information regarding the latest version is available from the manufacturer.

This Operation Manual Ergometer ergometrics 900
Version: 05/02
is valid for the following Software-Versions:
V.236, V.240 and V.243
ergoline GmbH
Lindenstraße 5
D-72475 Bitz
Tel.: +49 7431 98 94 - 0
Fax: +49 7431 98 94 - 127
e-mail: [email protected]
internet: http://www.ergoline.com

Version: 05/02 er900 Operation Manual
Art-No: 475.037



Version: 05/02 er900 Operation Manual
Art-No: 475.037

Operation Manual Ergometer
Contents Type er900

Table of Contents

EC Declaration of Conformity
Table of Contents.............................................................................................. 1
Foreword ........................................................................................................... 4

1. Introduction ....................................................................................................... 5
1.1 Comments by the Manufacturer for the User......................................................... 5
1.2 Product Relevant Regulations .............................................................................. 6
1.3 Warranty Regulation ............................................................................................ 6

2. Safety Notices ................................................................................................... 7
2.1 Safety .................................................................................................................. 7
2.2 Intended Use ....................................................................................................... 7
2.3 Basic Safety Comments ...................................................................................... 7
2.4 Normative Notices ............................................................................................... 8
2.4.1 Notice for EMC (electromagnetic compatibility) ................................................... 8
2.5 Requirements for Operating Personnel ................................................................ 8
2.6 Safety and Device Protecting Features................................................................ 9
2.7 Maintenance, Safety Relevant and Metrological Inspections ................................. 9
2.8 Identification Plate, Labelling ............................................................................. 10

3. Installation ....................................................................................................... 11
3.1 Installation Steps ............................................................................................... 11
3.2 Scope of Delivery .............................................................................................. 11
3.3 Accessories ...................................................................................................... 12
3.4 Transport ........................................................................................................... 12

4. Putting into Operation .................................................................................... 13
4.1 Operating Elements and Connections................................................................ 13
4.2 Measurement Head ........................................................................................... 14
4.2.1 Keypad ............................................................................................................. 14
4.3 Connectors and Interfaces ................................................................................. 15
4.3.1 Power Connection ............................................................................................. 15
4.3.2 Connector for Blood Pressure Cuff .................................................................... 15
4.3.3 Signal Connections ........................................................................................... 16
4.4 Power on Sequence .......................................................................................... 17

Version: 05/02 1 er900 Operation Manual

Art-No: 475.037















































Operation Manual Ergometer
Ergometry Process Type er900

6.3 Preparations for Control by ECG or PC

The ergometer must be specifically configured to the controlling ECG-Type or PC, see
Appendix. The ECG or PC is then in total control of the ergometry. Any entries that may
have been made on the ergometer are therefore nullified. There is no preparation of
the ergometer to be made on the console. Configure your ECG or PC in accordance
with the appropriate operator’s instructions for ergometry. Start the ergometric ses-
sion with the ECG or PC.

6.4 Starting the Ergometry

6.4.1 Starting Ergometry with Internal Control

1. Check to see if all the parameters are correctly entered.
2. Start the ergometric procedure by pressing the red „START“ key.
The ergometer will begin by measuring the blood pressure value at rest.

E

6.4.2 Starting an ECG or PC Controlled Ergometry

Start the ergometric program on your ECG or PC in accordance with the correspond-
ing instructions. After a successful start the ergometer will begin by measuring the blood
pressure value at rest.

Version: 05/02 25 er900 Operation Manual

Art-No: 475.037