The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

Transformer oil purification system - Transformer insulating oil quality is the key to high transformer performance. The insulating oils of your current and future transformers have to meet the highest standards regarding quality and purity to perform at their highest level of efficiency. During operation, the insulating fluids have to act both as an effective coolant and dielectric material. Using the right insulating oil with the right properties is, therefore, an essential part of the transformer business

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by hariskhankhalil058, 2020-06-22 22:24:23

Transformer oil purification system

Transformer oil purification system - Transformer insulating oil quality is the key to high transformer performance. The insulating oils of your current and future transformers have to meet the highest standards regarding quality and purity to perform at their highest level of efficiency. During operation, the insulating fluids have to act both as an effective coolant and dielectric material. Using the right insulating oil with the right properties is, therefore, an essential part of the transformer business

Keywords: Transformer oil purification system

Transformer Oil Purification Systems

Introduction

Are you looking for Transformer Oil purification Process? Then you
are landed on a right page here we have discussed about the systems
that are being used for the purification of Transformer oil and along
with that we have also discussed about the whole process of
transformer oil purification. Before going for the purification process,
we need to understand the term transformer oil filtration.

As we, all know that all the oils that are exempted from land have
waste material in them like the unwanted gases, sludge and the
undesired moisture. In addition, with the help of different filters and
filtration processes we can remove them out from the oil. These
processes and techniques are known as the filtration of transformer
oil.

Need of Filtration in transformer Oil

As we, all know about the benefits of filtration in transformer oil but
the next thing we also need to know is the need of filtration in
transformer oil. Here we have some of the things that will help you
to understand the actual need of filtration in transformer oil:

1. After filtration, the insulation properties of the oil will be improved
and even the properties of paper insulation properties are improved.

2. The process of filtration will increase the durability of the oil and
protect the transformer from several breakdowns.

3. As we have discussed that the process of filtration will increase
the durability of the oil and along with that, it will also increase the
efficiency of the oil, which helps you to make heavy profits.

4. Also the decrement in breakdown also removes the unwanted
interruptions in the power supply.

All we can say that if you want to increase the performance of the
transformer and want to make it more durable then you have to use
the filtered transformer oil in it. There are some of the companies
who will provide you the purest form of transformer oil, which
makes it an easy accessible thing.

Procedure for transformer oil purification

As we, all know that transformer holds a very important role in the
power supply industry, there are many companies who spend
thousands of rupees over the quality of the transformer, and this
thing shows that how important it is for the big industries and for the
companies as well. In addition, if you look at the reason behind the
performance of the transformer then it will clearly depend of the
purity of the oil in it. If you do regular filtration of the oil in the
transformer then it will give the maximum results.

With the help of transformer oil filtration system, you can also
reduce down the level of acids from the oil and make it alkaline. If
you have a high quality filter in your transformer then it will purify
the oil based on the standard purification methods. Also the
standards of the pure oil also depends upon the quality of the
unpurified oil and if the processed oil does not match with the stands
of ideal oil then all the process will go in the vain. However, there are
many alternative methods but you can skip them in this case.

In this article, you will get the important steps that are included in
the filtration of the transformer oil:

1. First Step

In the first step, you need to raise the temperature of the oil and if
we look at the temperature then the ideal temperature would be 65
degrees. With the help of this process, you can easily remove all the
unwanted moisture that will ruin the original capacity of the oil and
make it worse. In addition, the volume or viscosity of the oil also is

reduced so that it will be filtered very easily. I f we look at the ideal
heating filtration process then it will take about 2 square foot of
area. An only reason why most of the transformer oil filtration plant
has all the measures that are linked with the pressure control and
temperature management systems.

2. Second Step

In the second step, they will remove all the dirt and granules from
the transformer oil. For that, they use various filters and machine
systems, which will remove every single granule of dirt from the oil
and make it pure. There are some of the methods that are used for
the filtration and purification of transformer oil

• The first method is to clean the sludge from the candle shape
filter.

• The second method is to clean the sludge from configuration
process.

There are some extra classifications in the candle shape filter, which
will help you in making a correct decision. Candle filters are used in
two different machines:

• The machine that contain classical edge filter in it.
• The machine, which purifies the oil with the help of depth type

filter.

Both the methods are based on the cartridge system and there are
some advantages and disadvantages of it.

In edge type filters, you can use a single filter for three to four times,
which reduce down the costing of every filter. However, it will take
high number of workers to clean it or fit it again. If we look at the
advantages of edge cut machines then it is easily available in the
market and required less number of workers in it. This type of filter is
also considered as non-hydroscopic.

Another method for the removal of dirt is centrifugal method and
with the help of this method, you can change the efficiency of the oil
but in a very small amount. However, the process of centrifugal does
not require any external motor for making the speed higher and you
can easily purify the oil with this method.

Conclusion

With the final words we conclude that here we have discussed some
of the methods for transformer oil filtration. Along with that, we
have only included the important points, which is not available on
every platform. So read them thoroughly and get the information.


Click to View FlipBook Version
Previous Book
SARปี2562
Next Book
Deseo