Reynars Lift and Slide

CP155

sophistication for quality & insulation

PERFORMANCES Uw-value down to 1.07 W/m² (*),
depending on the frame/vent combination.
E NERGY
Rw (C; Ctr) = 35 (-2;-5) dB / 42 (-1;-3) dB, depending on glazing type
Thermal Insulation (1)
EN ISO 10077-2 11 22 33 44
(150(1P5a0) Pa) (300(3P0a0) Pa) (600 Pa) (600 Pa) (600(6P0a0) Pa)
COMFORT
(101APAa) 2A(520APa) 3A (1030AP4aA) 4A (25050AAPa) 6A 6A(3070APa) 7A 8A 8A 9A 9A EE99000
Acoustic performance (2) (150 Pa) (250 Pa) (450 Pa()450 Pa(6) 00(6Pa0)0 Pa) (9(0900PaP)a)
EN ISO 140-3; EN ISO 717-1
11 22 33 4 4 5 5 Exxx
Air tightness, max. test pressure (3) (400(4Pa0)0 Pa) (800 Pa) (800 Pa) (1200 Pa) (1200 Pa) (160(016Pa0)0 Pa) (2000 Pa) (2000(>P2a0)00 Pa)
EN 12207
AA BB CC
W ater tightness (4) ( 1/1(15/01)50) (1( /210/200) 0) (1/30(0) 1/300)
EN 12208
W KW1K 1 WWKK 22 W KW3K 3
Wind load resistance,
max. test pressure (5)
EN 12211; EN 12210

Wind load resistance to
frontal deflection
EN 12211; EN 12210

SAFET Y

Burglar resistance (6)
ENV 1627 – ENV 1630

This table shows possible classes and values of performances. The values indicated in green are the ones relevant to this system.

(1) The Uw-value measures the heat flow. The lower the Uw-value, the better the thermal insulation of the frame.
(2) The sound reduction index (Rw) measures the capacity of the sound reduction performance of the frame.
(3) The air tightness test measures the volume of air that would pass through a closed window at a certain air pressure.
(4) The water tightness testing involves applying a uniform water spray at increasing air pressure until water penetrates the window.
(5) The wind load resistance is a measure of the profile’s structural strength and is tested by applying increasing levels of air pressure to simulate the windforce. There are up to five

levels of wind resistance (1 to 5) and three deflection classes (A,B,C). The higher the number, the better the performance.
(6) The burglar resistance is tested by statistical and dynamic loads, as well as by simulated attempts to break in using specified tools.

CP 155 is a premium insulated sliding system with elevated value). This results in a glazed element with insulation values
performances. lower than 1.0 W/m²K, allowing the CP 155-HI system, which
is certified with a Minergie label, to be used for low energy
The sophisticated concept fulfils the user’s high buildings.
expectations of optimum quality, high insulation and ease
of operation. The system gives a lot of design freedom by Furthermore, the system is available with a low threshold that
allowing very large dimensions up to 3 meters in height and creates a perfect continuity between the indoor and
up to a vent weight of 400 kg. outdoor spaces and improves the accessibility to the
building. This accessibility and comfort is further improved
Thanks to the “High Insulation” upgrade, the system can by the solutions for automatic opening.
achieve superior insulation levels down to 1.07 W/m²K (Uf

Technical characteristics

Variants CP 130 CP 130-LS
Monorail, duo rail and 3-rail Monorail, duo rail and 3-rail
Visible width / Frame / Threshold
height Vent 50 / 28 mm 20 / 28 / 35 / 40 mm
T-profile 94 mm
Meeting section 94 mm
Meeting section 4 doors from 76 mm to 154 mm
from 76 mm to 154 mm 69 / 98 mm
Overall system depth Frame 194 mm
69 / 98 mm
Vent Monorail: 139 mm
194 mm Duo Rail: 139 mm
Letting the outside in Maximum element height
Maximum vent weight Monorail: 130 mm 3-Rail: 210 mm
A sliding door opens up a multitude of possibilities. Open this door just a few centimetres for a little fresh Rebate height Duo Rail: 110 / 130 / 139 mm 59 mm
air, a little wider to slip out into the garden or open it all the way to really let the outside in. This versatile Glass thickness
door creates an extra feeling of space and generates more natural light within the home. 3-Rail: 181 / 210 mm 2700 mm
Glazing method 300 Kg
59 mm 25 mm
CP130 Slide and CP130 Lift & Slide Thermal insulation
HI variant 2700 mm up to 42 mm
All types of CP130 sliding door use durable, stainless steel wheels and rails for ease of operation. In the dry glazing with EPDM or
case of the lift and slide system, the sliding door is lifted slightly before opening or closing. This reduces 300 Kg
the friction and makes the operation smooth and effortless. In the closed position, the lift and slide door is neutral silicones
lowered onto the track, providing additional weather resistance. 25 mm
23 mm and 32mm fibreglass
up to 42 mm reinforced polyamide strips

dry glazing with EPDM or extra insulation gaskets
neutral silicones

23 mm, 18.6mm and 32mm
fibreglass reinforced
polyamide strips

extra insulation gaskets

Monorail, duo rail or 3-rail

A monorail system combines a moving part with a fixed glazed element that is anchored directly into the
outer frame profile for a minimalistic look. The fixed pane is normally set to the inside of the track and is
internally beaded.

Monorail CP 130 CP 130-LS

XX

A duo rail system integrates two glazed opening vents with an identical appearance, giving an Flush floor integration Slim Line middle section Ventalis integration
aesthetically pleasing and versatile sliding door. Both vents can be made as sliding elements, giving total
flexibility.

Duo rail CP 130 CP 130-LS CP130-LS open corner system

XX Designed exclusively for the CP130-LS duo rail system, this clever corner system comprises two
sliding units that meet at a corner. Closed, the thick double weather gaskets protect against the
elements; slide the two doors apart to open up the whole corner with no fixed corner post to get in
the way or obstruct the view.

A 3-rail system makes it possible for a third opening vent to be installed. This solution allows the user to
slide door leaves one and two behind leaf three, opening up two-thirds of the width to the garden.

3-rail CP 130 CP 130-LS

XX

Technical characteristics

Variants CP 155 / CP 155-HI CP 155-LS / CP 155-LS / HI WITH
CP 155-LS / HI LABEL

Frame 52 mm 45 mm 60 mm
Vent 102 mm
102 mm 102 mm from 76 mm
Visible width / T-profile to 154 mm
height from 76 mm from 76 mm 115 mm
Meeting section to 154 mm to 154 mm 69 mm
Threshold
Meeting section 4 doors 115 mm 115 mm n/a

Overall system Frame 60 mm 20 mm 192 mm
depth Vent
212 mm 212 mm 68 mm / 105 mm
Maximum element height 3000 mm
155 mm / 242 mm 155 mm / 242 mm 400 Kg
Maximum vent weight (3-rail) (3-rail) 25 mm
up to 61 mm
Rebate height 68 mm 68 mm
dry glazing with
Glass thickness 3000 mm 3000 mm EPDM or

Letting the outside in Glazing method 300 Kg 400 Kg neutral silicones
41 mm and 23 mm
A sliding door opens up a multitude of possibilities. Open this door just a few centimetres for a little fresh Thermal insulation 25 mm 25 mm fibreglass reinforced
air, a little wider to slip out into the garden or open it all the way to really let the outside in. This versatile HI variant polyamide strips with
door creates an extra feeling of space and generates more natural light within the home. up to 52 mm up to 52 mm
3 chambers
dry glazing with dry glazing with
EPDM or EPDM or standard available

neutral silicones neutral silicones

32 mm and 23 mm 32 mm and 23 mm
fibreglass reinforced fibreglass reinforced
polyamide strips with polyamide strips with

3 chambers 3 chambers

extra insulation extra insulation
gaskets gaskets

CP155 Slide and CP155 Lift & Slide

All types of CP155 sliding door use durable, stainless steel wheels and rails for ease of operation. In the
case of the lift and slide system, the sliding door is lifted slightly before opening or closing. This reduces
the friction and makes the operation smooth and effortless. In the closed position, the lift and slide door
is lowered onto the track, providing additional weather resistance.

Monorail, duo rail or 3-rail Slim Line middle section CP 155-LS/HI low threshold CP 155-LS/HI with Minergie label

A monorail system combines a moving part with a fixed glazed element that is anchored directly into the
outer frame profile for a minimalistic look. The fixed pane is normally set to the inside of the track and is
internally beaded. If the Minergie specification product is required, the fixed pane will be set to the outside
of the track and will be externally beaded.

Monorail CP 155 / CP 155-HI CP 155-LS / CP 155-LS / HI WITH Performances
CP 155-LS / HI LABEL
Energy
XXX Uf-value up to 1.07 W/m2 (*),
Thermal Insulation (1) depending on the frame/vent combination
EN ISO 10077-2
A duo rail system integrates two glazed opening vents with an identical appearance, giving an Rw (C; Ctr) = 35 (-2;-5) dB / 42 (-1;-3) dB, depending on glazing type
aesthetically pleasing and versatile sliding door. Both vents can be made as sliding elements, giving Comfort
total flexibility.
Acoustic performance (2)
Duo rail CP 155 / CP 155-HI CP 155-LS / CP 155-LS/HI WITH EN ISO 140-3; EN ISO 717-1 1 2 3 4
CP 155-LS / HI LABEL (150 Pa) (300 Pa) (600 Pa) (600 Pa)
Air-tightness, max. test
pressure (3) 1A 2A 3A 4A 5A 6A 7A 8A 9A E900
EN 12207 (0 Pa) (50 Pa) (100 Pa) (150 Pa) (200 Pa) (250 Pa) (300 Pa) (450 Pa) (600 Pa) (900 Pa)

XX Water-tightness(4) 1 2 3 4 5
EN 12208 (400 Pa) (800 Pa) (1200 Pa) (1600 Pa) (2000 Pa)

Wind load resistance, A B C
max. test pressure (5) (‹ 1/150) (‹ 1/200) (‹ 1/300)
EN 12211; EN 12210
A 3-rail system makes it possible for a third opening vent to be installed. This solution allows the user to WK 1 WK 2 WK 3
slide door leaves one and two behind leaf three, opening up two-thirds of the width to the garden. Wind load resistance to
frontal deflection
EN 12211; EN 12210

Safety

Burglar resistance(6)
ENV 1627 – ENV 1630

3-rail CP 155 / CP 155-HI CP 155-LS / CP 155-LS/HI WITH This table shows classes and values of performances which can be achieved for specific configurations and opening types.
CP 155-LS/HI LABEL
(1) The Uf-value measures the heat flow. The lower the Uf-value, the better the thermal insulation of the frame.
XX (2) The sound reduction index (Rw) measures the capacity of the sound reduction performance of the frame and glass.
(3) The air tightness test measures the volume of air that would pass through a closed window at a certain air pressure.
(4) The water tightness test involves applying a uniform water spray at increasing air pressure until water penetrates the window.
(5) The wind load resistance is a measure of the profile’s structural strength and is tested by applying increasing levels of air pressure

to simulate the wind force.
(6) The burglar resistance is tested by static and dynamic loads, as well as by simulated attempts to break in using specified tools.

This variant requires specific burglar resistance accessories.
(7) Please refer to Reynaers’ CE passport for all technical data including size limitations.
(*) Value for HI-variant with Minergie label.