Product Guide 2020_V1

Hoyalux Amplitude Stellify Photochromic Long

• Standard with Double Sided Super Hard Coat
• Photochromic technology

SPECIFICATIONS Hoyalux Amplitude Stellify Photochromic Long
PROGRESSIVES
Lens Type AMP-1.55P-15
Product Code 1.55
Index 70/75
Diameter Up to 3 Diopters
Prism 385nm
UV Protection 15mm
Corridor 18mm
Min. Fitting Height Preset
Inset 1.20
Specific Gravity 40
Abbe Value Not available
Decentration Available
Special Thickness SF2
Engraving Mark Not available
Tinting Super Hard, VP
Coatings Available
Base Curve Nomination Not available
Position of Wear (POW)

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Hoyalux Amplitude Stellify Photochromic Long

 Table of Contents  Product Chart 201

Hoyalux Amplitude Short

• Eyas 1.60 material is three times stronger and much clearer than standard CR39 lenses
• Ideal for plastic & metal frames

SPECIFICATIONS Hoyalux Amplitude Short
PROGRESSIVES
Lens Type AMP-1.60-11
Product Code 1.60
Index 75
Diameter Up to 3 Diopters
Prism 385nm
UV Protection 11mm
Corridor 14mm
Min. Fitting Height 1.32
Specific Gravity 41
Abbe Value Not available
Decentration Available
Special Thickness SS3
Engraving Mark
Tinting SunStyle & Eyeveil II (No match tint)
Coatings VP
Spherical/Aspherical
Aspherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Hoyalux Amplitude Short

202  Table of Contents  Product Chart

Hoyalux Amplitude Long

• Standard with superior scratch resistant VP multi-coat
• Standard with UV protection
• Ideal for plastic & metal frames

SPECIFICATIONS Hoyalux Amplitude Long
PROGRESSIVES
Lens Type AMP-1.60-15
Product Code 1.60
Index 75
Diameter Up to 3 Diopters
Prism 15mm
Corridor 18mm
Min. Fitting Height 385nm
UV Protection 1.32
Specific Gravity 41
Abbe Value Not available
Decentration Available
Special Thickness SF3
Engraving Mark
Tinting SunStyle & Eyeveil II (No match tint)
Coatings VP
Spherical/Aspherical
Aspherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Hoyalux Amplitude Long

 Table of Contents  Product Chart 203

BIFOCALS

FLAT TOP 28, CURVE TOP 28

HOYA produces two types of Bifocal Lenses to suit any wearer

Flat Top 28

The Flat Top bifocal lens is made with HOYA’s standard 1.50 material and 1.53 Phoenix material. The Phoenix material is impact
resistant, making it one of the strongest lens materials on the market. Flat Top 28 lenses have a segment width of 28mm.

Curve Top 28

The Curve Top bifocal lens is made from HOYA’s 1.60 Eyas material, one of the lightest and thinnest lens materials available.
This lens provides athinner and lighter alternative to the Flat Top bifocal. The Curve Top also comes complete with our VP or
SFT multicoat.

204  Table of Contents  Product Chart

Bifocals

Flat Top 28

• Multicoat recommended
• Ideal for metal & shell frames

SPECIFICATIONS Flat Top 28
BIFOCAL
Lens Type PFT28-70 / PFT28-75
Product Code
Index 1.50
Diameter 70/75
Prism Up to 3 Diopters
UV Protection 385nm
Specific Gravity 1.32
Abbe Value
Decentration 58
Special Thickness Not available
HOYA Quality Mark
Tinting Available
Coatings (-)4
Spherical/Aspherical
SunStyle & Eyeveil II
Super Hard, VP, SFT, Diamond Finish

Spherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Flat Top 28

75mm
70mm

 Table of Contents  Product Chart 205

Flat Top 28 Transitions VII

• Double-Sided Super Hard Coat as standard
• UV Protection as standard
• Ideal for metal & shell frames
• Transitions VII photochromic technology: Grey only

SPECIFICATIONS Flat Top 28 Transitions VII
BIFOCAL
Lens Type PFT28 T7G
Product Code 1.50
Index 75
Diameter
Prism Up to 3 Diopters
UV Protection 385nm
Specific Gravity 1.32
Abbe Value 57
Decentration
Special Thickness Not available
Engraving Mark Available
Tinting N/A
Coatings Not available
Spherical/Aspherical
Super Hard, VP, SFT
Spherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Flat Top 28 Transitions VII

206  Table of Contents  Product Chart

Flat Top 28 Phoenix

• Phoenix 1.53 material is 10 times stronger than standard CR39 lenses
• Provides mechanical strength without compromising the optical quality
• Double-Sided Super Hard Coat as standard
• Ideal for plastic & metal frames

SPECIFICATIONS Flat Top 28 Phoenix
BIFOCAL
Lens Type PFT28-PNX
Product Code 1.53
Index 65/70
Diameter
Prism Up to 3 Diopters
UV Protection 400nm
Specific Gravity 1.11
Abbe Value 43
Decentration
Special Thickness Not available
HOYA Quality Mark Available
Tinting (-)P
Coatings
Spherical/Aspherical SunStyle & Eyeveil II (No match tint)
Super Hard, VP, SFT, Diamond Finish

Spherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Flat Top 28 Phoenix

 Table of Contents  Product Chart 207

Curve Top 28 Eyas

• Eyas 1.60 material is three times stronger and much clearer than standard CR39 lenses
• 100% UV Protection as standard
• Standard with superior scratch resistant VP Multi-coat
• Ideal for plastic & metal frames

SPECIFICATIONS Curve Top 28 Eyas
BIFOCAL
Lens Type PCT28EX
Product Code 1.60
Index 65/70
Diameter
Prism Up to 3 Diopters
UV Protection 400nm
Specific Gravity 1.32
Abbe Value 41
Decentration
Special Thickness Not available
HOYA Quality Mark Available
Tinting (-)6
Coatings
Spherical/Aspherical SunStyle & Eyeveil II (No match tint)
VP, SFT

Spherical

*Refer to the Hoya Product Chart for all available coating, tinting and Sensity combinations.

Curve Top 28 Eyas

208  Table of Contents  Product Chart

Hoyalog

Efficient and highly professional online ordering and Lens Ordering System
remote edging system.
HOYAlog on-line enables you to communicate with
What is HOYAlog? the HOYA Lab Management System. It gives you direct
order access to the complete range of HOYA lenses. This
• Lens Ordering System user-friendly system also gives you up to the minute
• Remote Edging System information on the status of an order.
• Minimum Edge Thickness System (mets)
• Point of Sale Tool Remote Edging System
• Laboratory Ordering Tracking System
• Real time laboratory ordering tracking information As well as all the benefits of ordering HOYA lenses via the
• Efficient customer management on-line system, HELP allows you to trace your own frame
• Modern, high tech images at point of sale with our 3D tracer. HOYA will then cut the lenses to within
• On-line ordering 2/1000mm accuracy giving you finished, remotely edged*
• Automatic measurement reading lenses that are delivered directly to your door with no
• Calculation and comparison of thickness and weight further processing necessary. Simply fit the lenses into
• 3-Dimensional tracing - calculates curvature and the frame and the spectacles are ready to be fitted to the
customer. The system is efficient and highly professional,
inclination angles for edging, and traces each eye with less time spent on glazing lenses meaning more
separately for the highest level of precision time spent dispensing and meeting customers’ needs.
• Errors are reduced to a minimum – as a result of orders
being entered directly into the production and *NB: Remote Edging is available for stock and RX lenses.
ordering system rather than communicating verbally
with a third party Point of Sale Tool
• Savings in terms of administration (phone calls, faxes
etc.) leaving Eye Care Professionals with more time to These days customers want more choice, high quality and
spend with their customers the very latest in lens design. HOYA helps in the delivery
• Guaranteed accuracy of lens edged sizing process with the HOYAlog on-line system. The HOYAlog
system runs under Windows, making it extremely easy
Minimum Edge Thickness System (METS) to use. You can easily select and show customers the
benefits of thinner and lighter lens designs, to the exact
METS is a system that optimises lens edge thickness dimensions of their chosen frames. At the touch of a
and is recommended for surfaced single vision, bifocal button you are able to trace the frame and calculate
and progressive lenses. METS is especially beneficial the exact thickness and weight of each lens. With the
for all plus powered lenses. This means minimum HOYAlog on-line system, you have a professional high
edge and centre thickness is guaranteed. tech point of sale ordering tool, meaning you can devote
more time with your customers. The technology and
SUNIX & Optomate Link service customers receive will show them that you are
really looking after their needs, increasing the perceived
HOYAlog to SUNIX and Optomate links are now available. value in their minds.
This function is only available for stand-alone computers
that are not on a terminal server. For more information
please contact your local HOYA Sales Consultant.

 Table of Contents  Product Chart 209

Predefined Shapes − Easy Ordering

1. Set up your HOYAlog to order ABC METSLens
Ordering System

• Open HOYAlog Configuration
• Go to the “Common” tab
• Select “ABC METS” and click “OK”

2. Ordering uncut lenses using predefined shapes

• Enter all the data as per normal into the order entry
screen

• Make sure you have selected “UnCut” and “Mets (grind)”
• To choose a predefined frame shape, go to “Tools”
• Follow the prompts: “Tools” -> “Get Shape from...” ->

“Predefined Shapes”

3. Choose from a selection of predefined frame shapes

• Using the nine predefined shapes, select the one that
most resembles the frame shape you require.

• Input measurements of A=Eye Size*, B=Frame height
and DBL=Distance Between Lens

• Click “OK”
* add 2mm to the eye size printed on the frame.

210  Table of Contents  Product Chart

Predefined Shapes 3 TIP
6
12 9 Tracing frames provides
better results with regards
45 to cut out and edge
thickness. This is due to
78 the full dimensions of
the frame being used in
the calculation of the lens
production.

*Please input Edge Thickness requirements manually for Nylon, Inline and Rimless orders.

Edge Thickness Nylon Inline Rimless
2.0mm n/r n/r
Lens Materials n/r n/r
CR39 1.50 n/r n/r n/r
NuPolar 1.50 2.0mm
Transitions 1.50 1.5mm 2.2mm 1.6mm
Phoenix 1.53 2.0mm n/r n/r
Stellify 1.55 1.7mm
Eyas 1.60 1.7mm 2.2mm 1.7mm
Eynoa 1.67 1.7mm 2.2mm 1.8mm
Eyry 1.70 2.2mm 1.9mm

 Table of Contents  Product Chart 211

How to order

VIA HOYALOG – Online Ordering and Remote Edging System

For more information about HOYA’s online ordering system HOYAlog, please contact your local HOYA Sales
Consultant, or alternatively contact HOYA’s National HOYAlog Manager, David Evans: 0437 393 483.

Stock and Grind Lenses

For uncut orders, please fax, email or phone through to one of our Customer Care Consultants with your
prescription order.
For Safety Lenses with or without fitting to own safety frames are ordered via our secure website www.hoyalens.
com.au.

Stock and Grind Lenses with Fitting to Frame

• Call, fax or email the script specifying ‘Frame to Follow’
• Send the frame and a copy of the script to HOYA, noting ‘Job in Progress’.

Safety Eyewear & Kits

• Click on HOYA website and use your HOYA login and password to access the order forms via the Safety Eyewear
section. Or contact the Safety department via hapl_rx_safety@hoya.com or call 02 9384 2087, alternatively you
can contact our Customer Service team– see table for details

HOYA Lens Australia – Head Office & Lab HOYA Lens – South Australia & Tasmania Branch

Address: Unit 1, 12-14 Baker Street, Address: 1-3 Starr Avenue, North Plympton SA 5037
Banksmeadow 2019 Phone: 08 8212 2844 / 1800 500 976
Phone: 02 9384 2000 / 1800 500 971 Fax: 08 8212 2866
Fax: 02 9310 3099 Email: hapl_cs_sa@hoya.com
Email: hapl_cs_nsw@hoya.com
HOYA Lens – Western Australia Branch
HOYA Lens – Victoria Branch
Address: Unit 4, 324 Orrong Road (Entrance via President St.)
Address: 71-73 Capel Street, Welshpool, WA 6106
West Melbourne VIC 3003 Phone: 1800 999 221
Phone: 03 9654 8955 Fax: (08) 6154 6453
Fax: 03 9654 8935 Email: hapl_cs_wa@hoya.com
Email: hapl_cs_vic@hoya.com
HOYA Lens New Zealand
HOYA Lens – Queensland Branch
Address: G Floor, Building 2,
Address: 36 Holland Street, 110 Mt. Eden Road, Auckland NZ
Northgate, QLD 4013 Phone: 64 9 630 3182 / 0800 744 692
Phone: 07 3221 3522 Fax: 64 9 630 4182
Fax: 07 3220 0090 Email: hapl_cs_nz@hoya.com
Email: hapl_cs_qld@hoya.com

212  Table of Contents  Product Chart

MODEL FRAME: MATADOR MOJO BLACK / RED

CORRECT.
PROTECT.
PRESERVE.

Prescription Safety Eyewear

The new standard in Safety Eyewear

 Table of Contents  Product Chart 213

Hoya Safety Prescription Eyewear

Introducing Hoya Safety Eyewear Chemical Resistant

HOYA Lens has been offering prescription Safety Eyewear Phoenix (polyurethane) Safety Lenses are completely
to customers since 2007, and currently offers low and resistant to common chemicals.
medium impact safety frames and lenses under the
1337.6 ANZ standard. HOYA’s Safety Eyewear range offers Item PHOENIX Polycarbonate
a complete product including frame and lenses. Our Acetone yes no
extensive frame range has been independently tested to Perfumes yes no
suit all workplace environments. Hairspray yes no
Household cleaners yes no
Introducing HOYA Safety Eyewear into your practice is an Solvents yes no
opportunity for you to build on your business. Wlndex yes no
Ammonia yes no
It will increase your customer database, improve
customer satisfaction and loyalty, and develop your Available Lens Range
bottom line. You will also be offering the latest in lens
technology and modern frames, differentiating yourself • Available in Single Vision, Progressives and Bifocals, in
from competitors. a wide range of prescriptions

Low vs. Medium impact • Available in Clear, Sensity, Transitions and tints
• Available in HOYA’s unique Phoenix 1.53 material
The type of safety eyewear you wear is dependent on the • Available in HOYA’s Super Hard Coat and Superior
task or activity conducted, and the risk that task can have
on damaging your eyes. HOYA Safety Eyewear offers Scratch resistant VP Multi-coat
both low and medium impact options:
Safety Eyewear Standard
Low Impact:
On the 22nd July 2012 a new standard became effective
Suitable for tasks where there is low risk of damage to covering safety prescription eyewear for low and medium
the eyes, with no debris, however some protection is impact requirements called AS/NZS1337.6.2012. This
still required. Suitable for occupations such as a dentist, new standard provides a more suitable option for people
doctor or any chemical laboratory related tasks. with prescription safety requirements, other than a mask
and fit over goggles.
Medium Impact:
Sai Global Accreditation
Suitable for occupations where there is a high risk of
debris that can damage the eyes, or where blunt objects To ensure the highest quality products, HOYA Lens
are utilised. This can include mining, construction, Australia has gained accreditation with SAI Global
grinding, farming and agriculture, wood-working, (licence number SMKH20522). Each frame and lens is
machinery usage, hammering or brick laying. independently tested by a NATA accredited laboratory for
low and medium impact, ballistics testing, penetration
Hoya Phoenix 1.53 Lenses tests at both ambient and elevated temperatures,
thickness criteria and prescription accuracy. SAI Global
HOYA’s unique proprietary Phoenix 1.53 lens material is a conduct a bi-annual audit to ensure all records and batch
medium impact certified lens material used throughout testing samples are maintained by HOYA Lens Australia.
HOYA’s Safety Eyewear range. It is completely resistant
to common chemicals, making it the perfect material for
safety in the workplace. Phoenix is also extremely light-
weight and is available with HOYA’s Super Hard Coat and
VP Multi-coat, guaranteeing crisp, clear vision across the
entire surface of the lens.

214  Table of Contents  Product Chart

HOW TO ORDER

Online

The easiest way to order HOYA Safety Eyewear is
through Hoyalog or via the order forms on the
HOYA website. Use your HOYA login and password
to access the Safety Eyewear section or contact the
Safety department via hapl_rx_ safety@hoya.com.
Alternatively you can contact Customer Service – see
P248 for more details.

Safety Eyewear Kit

To order a 24 piece safety eyewear kit contact your local
Hoya representative or email your request to:
hapl_rx_safety.com

HOYA SAFETY FRAME RANGE – MEDIUM IMPACT CERTIFIED

DISCLAIMER: All HOYA safety frames have been tested to the powers listed below. Prescription ranges may vary
depending on PD, base curve or frame style.

Matador Mojo, 56-21 Matador Mojo, 56-21 Matador Mojo, 56-21 Matador Mojo, 56-21
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Silver Silver/Blue Matte Black/Red Matte Black

Matador Mojo, 56-21 Matador Katalina, 56-16 Matador Katalina, 56-16 Matador Katalina, 56-16
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Tortoiseshell Smoke Black Tortoiseshell

Matador Katalina, 56-16 Matador Rio, 57-16 Matador Rio, 57-16 Matador Rio, 57-16
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/6.00cyl +6.00 to -6.00/6.00cyl +6.00 to -6.00/6.00cyl

Brown Black/Orange Black/Red Black/Yellow

AS/NZS 1337.6.2012  Table of Contents  Product Chart 215
SMKH 20522
SAI Global

Matador Rio, 57-16 Matador Rio, 57-16 Matador Loco, 57-17 Matador Loco, 57-17
+6.00 to -6.00/6.00cyl +6.00 to -6.00/6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Black/Blue Black/Grey Matte Black Crystal

Matador Harley Matador Harley Matador Harley Matador Harley
54-18 +6.00 to -6.00/-6.00cyl 54-18 +6.00 to -6.00/-6.00cyl 54-18 +6.00 to -6.00/-6.00cyl 54-18 +6.00 to -6.00/-6.00cyl

Black/Blue Black/Green Black/Red Matt Black

All Mojo frames come standard with a removable foam seal gasket and adjustable head strap.

Matador Mojo Matador Mojo
Gasket Head Strap

All Rio frames come standard with a removable foam seal gasket and adjustable head strap.

Matador Rio Matador Rio
Gasket Head Strap

AS/NZS 1337.6.2012  Product Chart
SMKH 20522
SAI Global

216  Table of Contents

HOYA SAFETY FRAME RANGE – LOW AND MEDIUM IMPACT

DISCLAIMER: All HOYA safety frames have been tested to the powers listed below. Prescription ranges may vary
depending on PD, base curve or frame style.

CUMMINGS OPTICAL FRAME RANGE

Cummings Optical 108, Cummings Optical 200, Cummings Optical 202, Cummings Optical 207,
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Gun Metal Gun Metal Gun Metal Gun Metal
Available in size : 52/18, 54/18 Available in size : 52/16, 54/16 Available in size : Available in size :
50/20, 52/20, 54/20, 56/20 52/16, 54/16, 56/18

ONGUARD 220 RANGE

OnGuard 220, OnGuard 220, OnGuard 220, OnGuard 220,
55-15 and 58-15. 55-15 and 58-15. 55-15 and 58-15. 55-15 and 58-15.
+6.00 to – 6.00/6.00 cyl +6.00 to – 6.00/6.00 cyl +6.00 to – 6.00/6.00 cyl +6.00 to – 6.00/6.00 cyl

Black Brown Clear Grey-Pink

OnGuard 220,
55-15 and 58-15.
+6.00 to – 6.00/6.00 cyl

Purple-White

C-SAFE FRAME RANGE

Velocity, 55-16  Table of Contents  Product Chart 217
+6.00 to -6.00/-6.00cyl

Matt Black

AS/NZS 1337.6.2012
SMKH 20522
SAI Global

HOYA SAFETY FRAME RANGE – LOW AND MEDIUM IMPACT

DISCLAIMER: All HOYA safety frames have been tested to the powers listed below. Prescription ranges may vary
depending on PD, base curve or frame style.

UGLY FISH RANGE

• Ugly Fish insert frames utilise an RX insert to house the prescription lenses
• Suitable for high and extended power ranges
• Power range available up to +/-10.00 for insert only products
• Transitions VII or Sensity are not available in insert models

Slim Glide Ultimate Cruize

Flame, 55-18 Warhead, 58-15 Cannon, 59-15
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl
Matte Black/Gloss Black
Tortoiseshell Matte Black

Robot, 55-16 Robot, 55-16
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Matte Black Crystal

Twister, 54-15 Twister, 54-15 Twister, 54-15
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Gloss Black Brown Red

Whirlwind, 51-18 Whirlwind, 51-18 Whirlwind, 51-18
+6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl +6.00 to -6.00/-6.00cyl

Black Grey Navy

218  Table of Contents  Product Chart AS/NZS 1337.6.2012
SMKH 20522
SAI Global

HOYA SAFETY – FREQUENTLY ASKED QUESTIONS

FAQS For any additional safety queries, please contact the Safety department on 02 9384 2087 or our customer
service team, see p248 for contact details.

1. What is the difference between a Certified and 8. Can I replace a lens or frame if it has been
Compliant safety appliance? damaged?

A Certified safety appliance has been tested by a 3rd party Safety eyewear products are designed to protect the eye
to the relevant eyewear standards and is given a “pass or and its surroundings. Any impact to the product means
fail” result. A Compliant appliance has been tested by the it has served its purpose and needs to be replaced and as
manufacturer to the relevant eyewear standards. such HOYA will not replace a frame or lens if it has been
damaged. Any damaged appliance that continues to be
2. What engravings appear on a Certified safety worn will have no warranty from HOYA.
appliance?
9. What is the lens power range available?
In accordance with 1337.6.2012, the lenses should
be engraved with markings that indicate who the All HOYA safety appliances are available in a maximum
manufacturer is, the impact rating of the appliance, if it power range of +6.00 to -6.00/-6.00 cylinder. This power
is a prescription device and if it is for indoor or outdoor range is applicable across all of HOYA’s lens designs.
use. The frame should be engraved with the license Contact your local Hoya Safety Representative for more
number of the manufacturer, the standard the appliance information.
meets and the Certifying body’s name and logo. HOYA
uses SAI Global. 10. What lens designs are available?

3. Does Phoenix meet the Standards? Our existing safety lens range is available with the
Phoenix or CR39 lens material in all lens designs. Single
Phoenix lens material has been independently tested Vision, Bifocals, Conventional and FreeForm Progressives.
and meets all the testing requirements of 1337.6.2012 . Tinting, Transitions, Sensity and Polarised are further
On top of this, Phoenix has greater scratch resistance, options with Super Hard coat standard on all lenses.
is lighter and has greater chemical resistance when Multicoat is also available.
compared to other safety lens materials.
11. How much does HOYA safety eyewear cost?
4. What frames are available for HOYA safety
appliances? Your existing safety pricelist is available from your local
HOYA Sales Consultant. Please contact them for a full
HOYA has a large range of Certified frames available in pricelist.
both metal and plastic material. HOYA’s frame range can
be viewed on the HOYA lens website. 12. What does the safety fitting charge cover?

5. Can I send a customer’s own safety frame for This charge covers the cost of the safety case, the safety
fitting? certificate that accompanies all HOYA safety jobs,
product insurance and additional costs to manufacture
HOYA will only use its Certified frame range for Certified safety products.
jobs. We do not fit customer’s own frames and Certify
them to the standards. This would put us in breach of 13. What is the turnaround time for HOYA safety
the standards and also our license with SAI Global. eyewear?

6. Can I use a frame from the HOYA safety kit? On average the turnaround time for prescription safety
eyewear is 7 working days.
The frames in the HOYA safety kit are samples to be used
for reference purposes when discussing safety eyewear 14. Can I replace worn nose pads, gaskets and
with customers and as such we do not fit lenses to our temple tips?
sample frames.
These frame parts are considered non-essential to the
7. Can I re-use a safety frame? integrity of the appliance and as such can be replaced at
the point of purchase.
Once a finished appliance leaves HOYA we cannot re-use
the frame as we are unable to guarantee the integrity of 15. Can I fit lenses to any safety frame and claim?
the product. Even though the frame may look in good
condition we are unable to guarantee this. Compliance to the standards?The 1337.6.2012 standards
contain all the testing requirements needed to comply

 Table of Contents  Product Chart 219

HOYA SAFETY – FREQUENTLY ASKED QUESTIONS

with the standard. If you can validate that your product f. Hoya does not cover RX changes or misuse
meets the standards, usually via a test report, you can
make claim to complying with it. If you cannot, you will For further information on the Hoya Safety range,
not be able to make such a claim and in fact could be please see website or email us for information on
breaching the Trade Practices Act. hapl_rx_safety@hoya.com.

17. How long do safety glasses last?

If a HOYA safety product isn’t damaged and is well
maintained it could last for sometime however it would
be advised to have the product checked regularly by an
optical store for any signs of damage and wear and tear.
Any damage sustained by a HOYA safety product means
it has completed the task it is meant to do – protect your
eyes and surrounding area. Any impact to the product
means it is unable to meet further impacts and as such
needs to be replaced immediately.

18. What warranties apply to HOYA safety eyewear?

Safety Lens Warranty:

HOYA safety lenses come with a two year warranty
against coating failure and any replacement lenses will
be supplied with a new frame. HOYA Progressive lenses
come with a ninety day warranty against non-adaption,
change of heights or change of PDs. Further details
outlined in our Credit and Warranty Policy.

Safety Frame Warranty:

a. All Hoya provided safety frames come with a one year
supplier warranty against faulty workmanship, this
warranty covers faulty goods or parts but not misuse

b. Any Safety frame that has been damaged due to
impact needs to be replaced with immediate effect,
including the lenses, and replaced with a new frame,
new lenses, new safety engravings and paperwork at
normal Hoya prices

c. Any Safety frame that needs a replacement non-
essential part, for example; nose pads or temple tip,
can be replaced at the end point of sales and done by
an authorized agent

d. Any part of a safety frame that has been tampered
with, and requires replacement, will be charged at
the full list price

e. Any progressive warranties or coatings warranties
will be supplied with a new safety frame at Hoya’s
cost

220  Table of Contents  Product Chart

Credit and Warranty Policy

Manufacturing defects • Warranty replacement lenses must be the same
• All work will be completed to Australian Standards prescription and specifications as original.

as a minimum. • Hard Coat 2 years warranty
• Warranties will be assessed against Australian Cancelled jobs policy
• HOYA processes all orders immediately upon receipt.
Standard specifications.
• HOYA will not cover any breakages or fitting errors HOYA must be advised of cancellations as soon as
possible to minimise the cost to the store as per the
that were not fitted by HOYA. conditions below.
• Claims for fitting defects must be returned with the • Jobs cancelled prior to the start of the surfacing
process will not be invoiced.
frame and lenses for assessment. • Jobs cancelled after the start of the surfacing process
• Warranty replacement lenses must be the same will be invoiced at 50% of the net price.

prescription and specifications as original. Stock lens returns policy (not applicable to
safety eyewear)
Progressive lenses • Lenses must be returned in the original packaging.
• Prescription changes allowed for Hoyalux iD MyStyle • The packaging and the lenses must be received in a

V+, iD LifeStyle V+ and iD WorkStyle V+, MyStyle condition suitable for resale as deemed by HOYA.
Profile and Balansis and LifeStyle 3. (Not applicable to • Discontinued lenses will not be accepted for credit.
safety eyewear)
• Warranty claims are accepted for patient Non- Warranty and credit claim periods
adaptation, PD adjustment, and Height adjustment • Warranty claims for Manufacturing Defects must be
only.
• Warranty covers the cost of the coatings, lens received within 60 days of original invoice date.
treatments and HOYA supplied fitting. • Stock lens returns must be received within 30 days
• Warranty replacement lenses will be charged at the
net price and credit issued on the lowest invoice. of original invoice date (Not applicable to safety
• Progressive warranty is valid for 3 months from eyewear)
original invoice date. • Progressive lens warranty claims must be received
• Warranty does not include glazing errors. within 3 months of the original invoice date.
• Non-adapt warranty replacements are credited at • Coating claims must be received within 2 years of the
your net of the lowest invoice. original invoice date. (3 years on Diamond Finish
• Only one claim per job. coated lenses)
• Warranty replacement lenses must be the same
prescription and specifications as original. Credit claim procedure
• Re-order replacement lenses.
Coatings • Return original lenses with a fully completed HOYA
• Diamond Finish coated lenses carry an extended
credit application form including the customers name
manufacturing defect warranty for a period of 3 years, and date of sale. Invoice numbers must be provided.
plus a 12-month scratch guarantee from original (Credit application forms are available from your local
invoice date. (Not applicable to safety eyewear) HOYA office).
• VP & SFT coated lenses carry a manufacturing defect • Credit application will be assessed by the HOYA
warranty for a period of 2 years from original invoice Quality Control Department.
date. Successful applications will have a credit processed
• Mirror coated lenses carry a manufacturing defect and sent to the store. Unsuccessful applications will be
warranty for a period of 2 years from original invoice returned to the store with a reason for the credit being
date. declined.
• Warranty does not include scratching, machine
slippage, heat damage or any other form of
mistreatment.

 Table of Contents  Product Chart 221

Glossary

Sensity Sensity Dark Sensity Shine
Grey
SNGY Brown SDGY Grey SDSB Blue
SNBR Green
SNGN SDBR Brown SDSC Copper

SDGN Green SDSS Silver

Light Mirror Full Mirror

HARD LS Silver HARD MS Silver

HARD LB Blue HARD MB Blue

HARD LR Copper HARD MG Gold

HARD LV Violet

HARD DF Coatings
HARD SFT Diamond Finish
HD HV2VP SFT
BSAR VP
S-HARD Back Surface AR
HD DFBC Super Hard
HD DFUV
HD VPBC Diamond Finish Blue Control
Diamond Finish UV Control

VP Blue Control

222  Table of Contents  Product Chart

 Table of Contents  Product Chart 223

HOYA Lens Australia NSW Head Office (ABN 80 001 266 548)

Unit 1, 12-14 Baker St, Banksmeadow, NSW 2019
P: 1800 500 971 F: (02) 9310 3099 E: hapl_cs_nsw@hoya.com

VICTORIA

71-73 Capel St,
West Melbourne, VIC 3003
P: 1800 500 973
F: (03) 9654 8935
E: hapl_cs_vic@hoya.com

QUEENSLAND

36 Holland St,
Northgate, QLD 4013
P: 1800 500 974
F: (07) 3220 0090
E: hapl_cs_qld@hoya.com

SOUTH AUSTRALIA

1-3 Starr Ave,
North Plympton, SA 5037
P: 1800 500 975
F: (08) 8212 2866
E: hapl_cs_sa@hoya.com

WESTERN AUSTRALIA

Unit 4, 324 Orrong Road,
(Entrance via President St.)
Welshpool, WA 6106
P: 1800 999 221
F: (08) 6154 6453
E: hapl_cs_wa@hoya.com

NEW ZEALAND

2/110 Mt. Eden Rd,
Mt Eden, Auckland
P: 0800 744 692
F: (64) 9 630 4182
E: hapl_cs_nz@hoya.com

www.hoyavision.com.au @hoyalensaustralia @hoyalensnewzealand