Tombstone City VB 5-Axis Catalog

Vischer & Bolli

Machining and workholding

Universal 5 Axis Vise
Positive high strength clamping
close to the work-piece
Obstruction free 5-axis machining

Vischer & Bolli www.vb-tools.com

Obstruction free
5-side machining

More and more companies are investing in 5 axis machining centres to enable increasingly challenging require-
ments for more complex work-pieces, shorter run times and smaller batch sizes to be satisfied.
Growing importance therefore attaches to the workholding method for which new solutions must be found.

The optimal solution for the following
key requirements

unrestricted all-around access to the work-piece Å 1

optimum clamping height above the table

high clamping force 34 kN / 7700 lb Ç, secure clamping by grip jaws with pull-down force É
low clamping depth É
suitability for raw or premachined, cubical, round or odd shaped parts Ö
un-parallel parts are easily clamped Ñ

variable clamping range, 1 - > 1000 mm (0,1” - > 40”)

minimum weight

easy loading

flexibility

operational from two sides

With a clamping depth of just 4 or 8 mm [.157” or .315”] and a freely selectable clamping height of 100, 125, 150 and 175 mm [3.93”,
4.92”, 5.90” , 6.89”] (page 4) above the table, machining is done in the best possible position for machine tool and work-piece. This
creates the possibility of working with the shortest and most stable tools.
Cube, round and odd shaped work-pieces can be clamped to fit their shape easily with the grip jaws (page 12) with no need for
previous embossing! Additionally pre-machined work-pieces can be clamped accurately using machinable soft jaws (page 12) and
support-plates (page 13). The clamping range (page 4) is limited only by the size of the machine table.

45 3

8 mm
4 mm

3
4

2

Vischer & Bolli www.vb-tools.com

The clamping unit can be mounted directly on T-slot (page 6) or grid machine tables (page 7),
grid-plates, pallets or on a base plate (page 5). This base plate includes a number of bores that permit a direct link to the

zero point clamping system (vb catalog 7.52) as well as to most T-slot or grid machine tables.

The clamping force is generated right below the clamping surface. This completely prevents spreading of the clamping
jaws, as can happen if conventional high clamping jaws are used on bed rails with a low mounted spindle.

2 conventional

parallel opens under
clamping working strain

Clamping force
no flare out
under tension

Clamping force

3

Vischer & Bolli www.vb-tools.com

Clamping capacity

(3.93170“0) 45 Clamping range 70

(3.93170“0) 45 Clamping range 70
Spindle
150 / 175
100 / 125 height (5.906“/ 6.890“) Spindle
(3.937“/ 4.921“)
height 80 80

Part no. Spindle length Clamping range Jaw movement max. tightening
mm mm mm clamping force
100 Nm / 80 ft-lb
742010-120 120 mm (4.724“) 0 – 120 mm (4.724“) ± 2 mm (0,0787“) 34 kN / 7700 lb
Coupling nut
742010-220 220 mm (8.661“) 0 – 220 mm (8.661“) ± 2 mm (0,0787“) part no. 742013

742010-320 320 mm (12.598“) 0 – 320 mm (12.598“) ± 2 mm (0,0787“)

Clamping of larger parts is easily done by joining 2 or more spindles together with the coupling nut part no. 742013.

Spindle setup

Secure spindle nut part no. 742008 with Spindle nut Spindle Locking slot Driving sleeve part no. 742011,
set screws part no. 742 SM5x6 on locking slots secure with locking screw
Mount locking nuts part no. 742009 with play, part. no. 742008 part no. 742 M6x30
secure with locking screw
part no. 742 M6x30 Mounting adapter
part no. 742000
Mounting adapter Locking slot Locking nuts minimum thread reach in Mounting aid for driving
part no. 742000 part no. 742009 to driving sleeve sleeve or locking nut
Mounting aid for driving Locking screw Locking screw
sleeve or locking nut part no. 742 M6x30 part no. 742 M6x30
Locking screw
part no. 742 M6x30

Mounting adapter
part no. 742000
Mounting aid for driving
sleeve or locking nut

Mounting adapter Spindle moving jaw side
part no. 742000 max. tightening 100 Nm / 80 ft-lb
Mounting aid for driving clamping force 34 kN/ 7700 lb
sleeve or locking nut
Torque wrench 40-200 Nm part no. Stahlwi gr20
fixed jaw side Ratchet insert 1/2 part no. Stahlwi 2-1/2
4 Socket head bit 8 mm part no. Stahlwi 8/1/2

Vischer & Bolli www.vb-tools.com

Set with T-slot baseplate

22 Sample:
15 742 Set 03 (clamping height 100 mm / 3.937“)

– 1 x mounting block (Pos.1 see page 11) Art. Nr. 742001-63
– 1 x mounting block (Pos.2 see page 11) part no. 742002-63
– 1 x T-slot baseplate (Pos.10 see page 10) part no. 742600-T126
– 1 x spindle 120 mm (4.724“) (Pos.15 see page 4) part no. 742010-120
clamping range 0-120 mm part no. 742006-8
– 2 x grip jaw 8 mm (0,315“) (Pos.22 see page 12)

2 10
1

Vise with mounting blocks T-slot baseplate 742...-T126
fixed jaw side part no. 742001-63
jaws-width moving jaw side part no. 742002-63
mm
vb 5 ax 100 - 100
clamping height

vb 5 ax 100 - 125
clamping height

vb 5 ax 100 - 150
clamping height

vb 5 ax 100 - 175
clamping height

L = 400 mm (15.748”)
Part no. 742400-T126
L = 500 mm (19.685”)
Part no. 742500-T126
L = 600 mm (23,622”)
Part no. 742600-T126

Order no. l l l
l l l
742 Set 01 l l
742 Set 02 l l
742 Set 03 l l
742 Set 04 l
742 Set 05 l l
742 Set 06 l
742 Set 07 l
742 Set 08 l l
742 Set 09 l l
742 Set 10
742 Set 11 l L
742 Set 12 l
l

height 250
100/125 (9.843“)
(3.937“/ 4.921“)

height
150/175
(5.906“/6.890“)

100
(3.937“)

Accessories see page 8

5

Vischer & Bolli www.vb-tools.com

Set to fit T-slot machine table

22 Mounting blocks assembly
15

2 14 screw M12x45 Ø 14-+00,,02

13 shoulder bush Ø 12-+00,,02 Pos.13 shoulder bush
Ø 10-+00,,02

Ø16

12 key way nut 18 H7 mounting block

11 1 11 T-nut 12 g7

Sample: 14 g7 Pos.12 key way nut
742 Set 30 (clamping height 100 mm / 3.937“) 16 g7 to fit T-slot

– 1 x mounting block (Pos.1 see page 11) part no. 742001-63 18 g7
– 1 x mounting block (Pos.2 see page 11) part no. 742002-63 T-slot
– 2 x key way nut T18-T14 (Pos.12) * part no. 742001-1814
– 8 x shoulder bush Ø16 -Ø12 (Pos.13) * part no. 742001-1612 Pos.11 T-nut
– 8 x screw M12x45 (Pos.14) * part no. 742 M12x45
– 8 x T-nut (Pos.11) * part no. 775-PT06-1412 Mounting blocks to fit
– 1 x spindle 120 mm (4.724“) (Pos.15 see page 4) part no. 742010-120 T-slot machine table (see page 11)
clamping range 0-120 mm part no. 742006-8
– 2 x grip jaw 8 mm (0,315“) (Pos.22 see page 12) Pos. 1 (fixed jaw side)
Pos. 2 (moving jaw side)
* matching to machine table (see page 8/9/11 or Check list page 14)

jaws-width Vise
mm

vb 5ax - 100 - 100
clamping height

vb 5ax - 100 - 125
clamping height

vb 5ax - 100 - 150
clamping height

vb 5ax - 100 - 175
clamping height

fixed jaw side
Part no. 742001-63
moving jaw side
Part no. 742002-63
fixed jaw side
Part no. 742001-50
moving jaw side
Part no. 742002-50
fixed jaw side
Part no. 742001-40
moving jaw side
Part no. 742002-40
fixed jaw side
Art. Nr. 742001-1
moving jaw side
Part no. 742002-1

Order no. l ll
l ll
742 Set 30 l ll
742 Set 31 l ll
742 Set 32
742 Set 33 l ll
742 Set 34 l ll
742 Set 35 l ll
742 Set 36 l ll
742 Set 37
742 Set 38 l ll
742 Set 39 l ll
742 Set 40 l ll
742 Set 41 l ll
742 Set 42
742 Set 43 l ll
742 Set 44 l ll
742 Set 45 l ll
l ll

Accessories see page 8
6

Vischer & Bolli www.vb-tools.com

Set to fit grid machine table

22 Sample:
742 Set 56 clamping height 175 / 6.890“ mounted to off-center-position-
grid spacing 50 by brackets with 2 torsion plates and 1 damping plate)
15
– 1 x mounting block (Pos.1 see page 11) part no. 742001-50
– 1 x mounting block (Pos.2 see page 11) part no. 742002-50
– 1 x spindle 120 mm (4.724“) (Pos.15 see page 4) part no. 742010-120
clamping range 0-120 mm
2 – 2 x grip jaw 8 mm (0,315“) (Pos.22 see page 12) part no. 742006-8

– 4 x bracket to grid 50 Ø16 (Pos.29) part no. 742015-50
– 8 x shoulder bolt M16 for grid 50 (Pos.30) part no. PT31-1665

742 Set 57 clamping height 175 / 6.890“ mounted to off-center-position-

grid spacing 40 by brackets with 2 torsion plates and 1 damping plate)

– 1 x mounting block (Pos.1 see page 11) part no. 742001-40
– 1 x mounting block (Pos.2 see page 11) part no. 742002-40
– 1 x spindle 120 mm (4.724“) (Pos.15 see page 4) part no. 742010-120
30 clamping range 0-120 mm
29 – 2 x grip jaw 8 mm (0,315“) (Pos.22 see page 12) part no. 742006-8
30 1 – 4 x bracket to grid 40 Ø12 (Pos.29) part no. 742015-40
jaws-width
mm – 8 x shoulder bolt M12 for grid 40 (Pos.30) part no. 742 M12-36-55

Order no. Vises Mounting blocks to fit grid, spacing 50 or 40 (see page 11)
742 Set 50 Pos. 1 (fixed jaw side)
742 Set 51
742 Set 52 Pos. 2 (moving jaw side)
742 Set 53
742 Set 54 vb 5ax 100 - 100 grid spacing 50 Ø16M16 grid spacing 40 Ø12M12
742 Set 55 clamping height mounting blocks to fit on mounting blocks to fit on
742 Set 56 off-center-position-grid by off-center-position-grid by
742 Set 57 vb 5ax 100 - 125 brackets part no. 742015-50 brackets part no. 742015-40
clamping height fixed jaw side fixed jaw side
742 Set 60 part no. 742001-50 part no. 742001-40
742 Set 61 vb 5ax 100 - 150 moving jaw side moving jaw side
742 Set 62 clamping height part no. 742002-50 part no. 742002-40
742 Set 63
742 Set 64 vb 5ax 100 - 175
742 Set 65 clamping height
742 Set 66
742 Set 67 l l l
l l l
Accessories see page 8 l l
l l l
l

l
l

l
l

Blank mounting blocks Mounting blocks
part no. 742002-1 / 742001-1 to part no. 742001-63 / 742002-63 to
fit on center-position-grid 50 fit on center-position-grid 40
Ø16M16 mounted with brackets Ø12M12 mounted with brackets
part no. 742015-50 part no. 742015-40
Blank mounting blocks can be
machined to fit any custom size

l l l
l l l
l l
l l l
l

l
l

l
l

7

Vischer & Bolli www.vb-tools.com

Parts list

23 23
22

18 17 16 15 32 23

20 31

20 78 5a 21
19
6
4
5 55 3
14 14

13 29
29 13
1
30
12
9 11

30 78
2 11

29

29a

10

8

Pos. Description pcs Part no.

mounting block fixed jaw for T-slot 63 742001-63
mounting block fixed jaw for grid 50 / T-slot 100 742001-50
1 mounting block fixed jaw for grid 40 / T-slot 80 1 742001-40

mounting block fixed jaw blank 742001-1
mounting block moving jaw for T-slot 63 742002-63
mounting block moving jaw for grid 50 / T-slot 100 742002-50
2 mounting block moving jaw for grid 40 / T-slot 80 1 742002-40

mounting block moving jaw blank 742002-1
adapter plate for height 125 742004-125
3 adapter plate for height 150 1 742004-150
adapter plate for height 175 742004-175
4 fixed jaw 1 742004
torsion plate for height 100 1 742007-100
torsion plate for height 125 1 742007-125
5 torsion plate for height 150 2 742007-150

torsion plate for height 175 2 742007-175
damping plate for height 150 742007-150D
5a damping plate for height 175 1 742007-175D

6 moving jaw 1 742005
7 socket screw M8x25(mounting torsion plate to moving jaw side) 8 742 M8x25
8 socket screw M8x30 (mounting 2 torsion plates to moving jaw side) 8 742 M8x30
shoulder bolt M12x20-35 for height 100 742 M12-20-35
shoulder bolt M12x45-60 for height 125 742 M12-45-60
9 shoulder bolt M12x70-85 for height 150 3 742 M12-70-85

shoulder bolt M12x95-110 for height 175 742 M12-95-110
base plate 250x400x45 T-slot 14 -126 742400-T126
10 base plate 250x500x45 T-slot 14 -126 1 742500-T126
base plate 250x600x45 T-slot 14 -126 742600-T126
T-nut 12 M10 (corresponding to T-slot on table) 775 PT06-1210
T-nut 14 M12 (corresponding to T-slot on table) 775 PT06-1412
11 T-nut 16 M14 (corresponding to T-slot on table) 8 775 PT06-1614
T-nut 18 M16 (corresponding to T-slot on table) 775 PT06-1816
T-nut 20 M18 (corresponding to T-slot on table) 775 PT06-2018
key way nut T18-T12 742001-1812
key way nut T18-T14 742001-1814
12 key way nut T18-T16 2 742001-1816

key way nut T18-T18 742001-1818
shoulder bush Ø16 -Ø10 742001-1610
13 shoulder bush Ø16 -Ø12 8 742001-1612
shoulder bush Ø16 -Ø14 742001-1614
socket screw M10x45 742 M10x45
14 socket screw M12x45 (standard) 8 742 M12x45
socket screw M16x50 742 M16x50
spindle 120 mm 742010-120
15 spindle 220 mm 1 742010-220
spindle 320 mm 742010-320
Coupling nut 1 742013
Torque wrench 40-200 Nm 1 Stahlwi gr20
Ratchet insert 1/2 1 Stahlwi 2-1/2
Socket head bit 8 mm 1 Stahlwi 8/1/2
16 spindle nut 1 742008
17 set screw M5x6 for spindle nut 4 742 SM5-6
18 locking nut 2 742009
19 driving sleeve 1 742011
20 socket screw M6x30 4 742 M6x30
21 mounting adapter 1 742000-00
grip jaw 5 mm height 2 742006-4
grip jaw 8 mm height 2 742006-8
soft jaw 8 mm height 2 742006-R8
22 soft jaw 34 mm height 2 742006-R34

grip jaw round 5 mm height 4 742006-C4
grip jaw round 8 mm height 4 742006-C8
23 hexagon socket screw M6x16 8 742 M6-16
24 spacer to support plate on moving jaw side) 2 742014
support plate for height 100 742012-100
support plate for height 125 742012-125
25 support plate for height 150 2 742012-150

support plate for height 175 742012-175
26 socket screw M8x40 (mounting support plate to moving jaw side) 2 742 M8-40
27 socket screw M8x16 (mounting support plate to fixed jaw side) 2 742 M8-16
28 socket screw M8x45 (mounting support-plate to moving jaw side fitted with 2 torsion plates) 2 742 M8-45
bracket grid 40 - Ø12 M12 742015-40
29 bracket grid 50 - Ø16 M16 4 742015-50

29a double bracket grid 40 2 742015-40-1
double bracket grid 50 / 2” 742015-50-1
shoulder bolt for grid 40 - M12-36-55 742 M12-36-55
30 shoulder bolt for grid 50 - M16-43-65 8 PT31-1665

31 Workpiece stop 1 742 6AWSM
32 Coupling nut 1 742013

9

Vischer & Bolli www.vb-tools.com

T-slot baseplate zero point clamping system

Matches all common machine-tool tables and

45mm 400mm 4x DockLock 1t plug bores Ø25 (Ø0.984“)
(1.772“) (15.748“) 8x for M16 mounting holes
8x for M12 mounting holes
6mm 11mm 21,4mm vb DockLock spacing 200±0.01 (7.874“)
(0.236“) (0.433“) (0.843“) ==

14 H7 27mm 111mm (4.370“)
(0.551“) (1,063“) 100mm (3.937“)

126 (4.961“) 16mm 25mm 40mm (1.575“) == Part no.
(0,630“) (0.984“) 25mm (0.984“) vb DockLock spacing 200±0.01 (7.874“) 742400-T126
250mm (9.843“)
0

25mm (0.984“)
40mm (1.575“)

100mm (3.937“) 0 4xM10x25/45
111mm (4.370“) 4xM10x0.984“/1.77“
180mm (7.087“) 125mm (4.921“)
Slot for mounting by brackets 167mm (6.575“) 150mm (5.906“)
part no. 751172 160mm (6.299“) 160mm (6.299“)
150mm (5.906“) 167mm (6.575“)
125mm (4.921“) 180mm (7.087“)

45mm 500mm 4x DockLock 1t plug bore Ø25 (Ø0.984“)
(1.772“) (19.685“) 12x for M16 mounting holes
vb DockLock spacing 200 ±0.01 (7.874“) 8x for M12 mounting holes
6mm 11mm 21,4mm ==
(0.236“) (0.433“) (0.843“) Part no.
742500-T126
14 H7 27mm 111mm (4.370“)
(0.551“) (1,063“) 100mm (3.937“) 4xM10x25/45
4xM10x0.984“/1.77“
126 (4.961“) 16mm 25mm 40mm (1.575“) ==
(0,630“) (0.984“) 25mm (0.984“) vb DockLock spacing 200 ±0.01 (7.874“)
250mm (9.843“)
0

25mm (0.984“)
40mm (1.575“)

100mm (3.937“)
111mm (4.370“)

0

230mm (9.055“) 125mm (4.921“)
225mm (8.858“) 150mm (5.906“)
180mm (7.087“) 160mm (6.299“)
160mm (6.299“) 180mm (7.087“)
150mm (5.906“) 225mm (8.858“)
125mm (4.921“) 230mm (9.055“)

45mm 600mm 4x DockLock 1t plug bore Ø25 (Ø0.984“)
(1.772“) (23.622“) 16x for M16 mounting holes
8x for M12 mounting holes
6mm 11mm 21,4mm vb DockLock spacing 200 ±0.01 (7.874“)
(0.236“) (0.433“) (0.843“) == Part no.
742600-T126
14 H7 27mm 111mm (4.370“)
(0.551“) (1,063“) 100mm (3.937“) 4xM10x25/45
4xM10x0.984“/1.77“
126 (4.961“) 16mm 25mm 40mm (1.575“) ==
(0,630“) (0.984“) 25mm (0.984“) vb DockLock spacing 200 ±0.01 (7.874“)
250mm (9.843“)
0

25mm (0.984“)
40mm (1.575“)

100mm (3.937“)
111mm (4.370“)

280mm (11.024“) 0 125mm (4.921“)
250mm (9.843“) 150mm (5.906“)
225mm (8.858“) 160mm (6.299“)
180mm (7.087“) 180mm (7.087“)
160mm (6.299“) 225mm (8.858“)
150mm (5.906“) 250mm (9.843“)
125mm (4.921“) 280mm (11.024“)

10

Vischer & Bolli www.vb-tools.com

Mounting blocks

moving jaw side part no. 742002-50 moving jaw side part no. 742002-40 bracket grid 40 - Ø12 M12
part no. 742015-40
234±0,01 188±0,01
(9.213") (7.402")

21mm
(0.826")
110mm 21mm 100mm 12,5mm (21.810m2m“) 1mm
(4.331") (0.826") (3.937") (0.4921“) (0.039“)

100mm (3.937") 80mm (3.150") 21mm
75mm (2.953") 60mm (2.362") (0.827“)
50mm (1.969") 40mm (1.575")
0 0 40mm
50mm (1.969") 40mm (1.575") (1.575“)
75mm (2.953") 60mm (2.362")
100mm (3.937") 80mm (3.150")
50mm 40mm
(1.969") (1.575")

250mm (Raster 50)
(9.843" grid 50)
(Ø 0.630") (Ø 0.472")(Ø 0.472")200mm (Raster 40)145mm
(Ø 0.472")(7.874" grid 40) (5.709“)

(Ø 0.630") 40mm
(1.575“)
(Ø 0.630")
fixed jaw side part no. 742001-50 fixed jaw side part no. 742001-40 40mm
(1.575“)

21mm 250mm (Raster 50) (Ø 0.630") 21mm 200mm (Raster 40) 0.472") 21mm
(0.826") (9.843" grid 50) (0.826") (7.874" grid 40) (0.827“) 35mm

40m (mØ (1.378“)
(1.575")
bracket grid 50 - Ø16 M16 / 2”
130mm 100mm (3.937") 110mm part no. 742015-50
(5.118") 75mm (2.953") (4.331")
50mm (1.969")
80mm (3.150") (21.810m2m“) 1mm
0 60mm (2.362") (0.039“)
50mm (1.969") 40mm (1.575") 15mm
75mm (2.953") (0.591“) 21mm
100mm (3.937") 0 (0.827“)
40mm (1.575")
50mm 50mm 60mm (2.362")
(1.969") (1.969") 80mm (3.150")

40mm
(1.575")

234±0,01 188±0,01 50mm
(9.213") (7.402") (1.969“)

Use for: Use for: 180mm
– Grid 50 center-position / off-center-position – Grid 40 center-position / off-center-position (7.087“)
– T-slot 100 center-position / off-center-position – T-slot 80 center-position / off-center-position 50mm
– T-slot 150 off-center-position – T-slot 120 off-center-position (1.969“)
– Off-center-position-grid 50 Ø16M16 – Off-center-position-grid 40 Ø12M12
mounted with brackets (Pos.29) mounted with brackets (Pos.29)

50mm
(1.969“)

moving jaw side part no. 742002-63 moving jaw side part no. 742002-1

148±0,01 21mm 184±0,01 21mm
(5.827") (0.826") (7.244") (0.827“) 35mm

21mm (1.378“)
(0.826")
63mm (2.480")
31,5mm (1.240") 30mm 130mm To mount 2 or more 5ax vises next to
0 (1.181") (5.118") each other on a grid 40 / 50 or 2inch
31,5mm (1.240")
63mm (2.480")

90mm double bracket grid 40
(3.543") part no. 742015-40-1

(Ø 0.472") 30mm (Ø 0.630") 200mm (Raster 50) ==
(1.181") (7.874" grid 50)
(Ø 0.630")160mm (Raster 40)
(Ø 0.630")(6.299" grid 40)

(Ø 0.472") 35 0.3
(Ø 0.472") == 8 0.3
fixed jaw side part no. 742001-63 fixed jaw side part no. 742001-1 145 = = 15-+00..03
12.5 40 40 40 (12.5)

21mm 160mm (Raster 40) (Ø 0.472") 21mm 200mm (Raster 50) (Ø 0.630") 4x
(0.826") (6.299" grid 40) (0.826") (7.874" grid 50)

70mm 130mm double bracket grid 50 / 2”
(2.756") (5.118") part no. 742015-50-1
100mm
(3.937") ==

63mm (2.480") 184±0,01 8
31,5mm (1.240") (7.244")
= = 18-+00..30
0 Use for:
31,5mm (1.240") – Customizing
63mm (2.480") – Center-position-grid 50 Ø16M16
148±0,01 mounted with brackets (Pos.29)
(5.827") 180 =
=
Use for:
– T-slot 63 center-position / off-center-position (1.3) (1.3) (1.3) (1.3)
– Center-position-grid 40 Ø12M12
mounted with brackets (Pos.29) 35 75
== 76.3

76.3 26.3 17
75 25
0
25

26.3

11

Vischer & Bolli www.vb-tools.com

Jaws

Grip jaw, hardened, 8 mm height Grip jaw, hardened, 5 mm height Soft jaw part no. 742006-R8 Soft jaw part no. 742006-R34
part no. 742006-8 part no. 742006-4 (8 mm in height from support plate) (34 mm in height from support plate)

8 7 5 3,6
(0,315“) (0,276“) (0,197“) (0,142“)

4 4 12 38
(0,157“) (0,157“) (0,472“) (1,496“)

100 100 100
(3,937“) (3,937“) (3,937“)

100
(3,937“)

Grip jaw round, hardened, 8 mm height Grip jaw round, hardened, 5 mm height
part no. 742006-C8 part no. 742006-C4

8
(0,315“)
4
(0,157“)
7
(0,276“)

8
(0,315“)
5
(0,197“)
3,6
(0,142“)

ø29 ø29
(ø1,142“) (ø1,142“)
(ø1,ø43059,“8) (ø1,ø43059,“8)

Workpiece stop Part no. 742 6AWSM (Pos.31) see page 9

80
(3,15“)
(1,1022“8//25,3087“)

(2,25065“)

12

Vischer & Bolli www.vb-tools.com

Support plates

Accurate height clamping of premachined work pieces is performed by using support plates in combination with
machinable soft jaws.

4 100
(0,157“) (3,937“)

Description Height Part no.
mm / “

(3.937“/ 4.921“/ 5.906“/ 6.890“) Support plate Pos.25 742012-100
Spacer Pos.24 100 742014
height 100 / 125 / 150 / 175 ± 0,01 mm Hexagon socket screw M8x40 Pos.26 3.937“ 742 M8x40
Hexagon socket screw M8x16 Pos.27
742 M8x16
Support plate Pos.25 742012-125
Spacer Pos.24 125 742014
Hexagon socket screw M8x40 Pos.26 4.921“ 742 M8x40
Hexagon socket screw M8x16 Pos.27 742 M8x16
742012-150
Support plate Pos.25 150 742014
Spacer Pos.24 5.906“ 742 M8x16
Hexagon socket screw M8x16 Pos.27 742 M8x45
Hexagon socket screw M8x45 Pos.28 742012-175
175 742014
Support plate Pos.25 6.890“ 742 M8x16
Spacer Pos.24 742 M8x45
Hexagon socket screw M8x16 Pos.27


Hexagon socket screw M8x45 Pos.28

Soft jaw, part no. 742006-R8 or 742006-R34 (see page 12)

Spacer (Pos.24) socket screw M8x40 (Pos.26) socket screw M8x16 (Pos.27)
Part no. 742014 Part no. 742 M8-40 Part no. 742 M8-16
(with two torsion plates M8x45
Art. Nr. 742 M8x45, Pos. 28)

13

Vischer & Bolli www.vb-tools.com

Check list for custom dimensions

Height above table: ___________________________________
Clamping length: _____________________________________

T-slot tables

T-slot spacing:________________________________________
T-slot width: _________________________________________
Thread size: _________________________________________
Center-position slot:
Off-center-position slot:

Grid tables

Grid spacing: _______________________________________
Grid size / thread size: _______________________________
Mounting fixed and moving jaw side by brackets:
Mounting fixed side to grid, moving side by brackets:
Center-position-grid:
Off-center-position-grid:

14

Vischer & Bolli www.vb-tools.com

Examples of applications

15

09.12 / 500 / LD © Copyright Vischer & Bolli AG changes reserved