Industrial Equipment Rental & Service
MICHIGAN’S
ONLY AUTHORIZED
WARRANTY SERVICE CENTER
Bending
Classic Electric Bender for Conduit & Pipe 555C Series Electric
Bender Shoe Guides
Item #555C VERSATILE
Item #28008
• Bend 1/2" to 2" RIGID/IMC/EMT Rigid/IMC Shoe Group, 1/2" to 2"
on 2 shoes Item #23803
EMT Shoe Group, 1/2" to 2"
MOBILE
• No loose pieces
• Lightweight, compact design for • One time setup
easy jobsite portability • Bend 1/2" to 2" on one shoe
• Works with 555C electric conduit benders
RELIABLE • Less lifting reduces operator fatigue
• Greenlee’s classic “triple-nickel”
electric bender, features simple
relay controls for easy field repairs
Electric Bender VERSATILE
Item #854DX • 1 shoe bends 1/2" to 2" EMT, IMC and Rigid conduit
• Simple switching between vertical and horizontal
bending configurations
ACCURATE
• Absolute encoder stops bending at precise angles
• Digital pendant sets angle and
monitors process
RELIABLE
• Solid state electronics rated for 1,000,000+ bends
• Solid state system eliminates arcing and prevents
damage from temporary power loss
Mobile Bending Table
Item #881-MBT
EFFICIENT
• Save one hour with every move
• All components pin to the table, reducing component
loss allowing convenient transport from site to site
MOBILE
• Minimize material handling and repetitive
lifting with on-board storage
• Fits through standard height doors 36" wide
ERGONOMIC
• Waist-height bending for operator comfort
Cable Pulling
Ultra Tugger® 8 Ultra Tugger® 10 G3 Tugger® Cable Puller
(UT8) Cable Puller: 8000 lb. (UT10) Cable Puller: 10,000 lb.
Item #G3
Item #6806 Item #6906
• 3X faster set-up than competition -
SPEED SPEED no loose pieces
• 8,000 lbs. pulling force to handle most • 2-Speed gear-motor enable 20% faster • 20% faster than competition
pulling jobs. pulling time • 25% stronger than competition
• Clamp easily adjusts for different sizes of
VERSATILE • Shift from high-speed/low-load pulling to
low-speed/high-load pulling with a simple conduit
• Available with Mobile VersiBoom for double-tap motion on the foot-pedal • Right angle sheave safely keeps operators
less than 2 minute, one person set-up,
& 20' tall VERSATILE out of direct line of pulls
• Portable handle and wheels for increased
• Available with floor • Available with Mobile VersiBoom for less
mount & chain than 2 minute, one person set-up, & 20' tall mobility around jobsites
mount for tighter • Change tail length, pull direction, and angle
spaces • Available with floor mount
& chain mount for of pull with ease
tighter spaces • Can hook on the back of a truck hitch
• Customized motor with
HEAVY DUTY
circuit breaker
• Customized gear motor specifically
specifically for heavy-duty designed for
cable pulling application cable pulling
and meet UL & cUL
safety requirements
Available with pulling rope when requested Pulling Rope 1/2" x 600 ft pulling rope Item #456
7/8" x 1200 ft pulling rope Item #34138
Hand Tools
Hand Bender Crimper Compact Ratchet
Cable Cutter
Item #841AH Item #K09-2GL
Item #760
• Aluminum Hand Bender Head with Handle
for 3/4" EMT, 1/2" Rigid/IMC • Crimping Capacity: • 1000 kcmil (MCM) Maximum Use,
8 AWG - 4/0 AWG Copper 750 kcmil (MCM) Frequent Use
• Superior, patented Site-Rite sighting system featuring
cast-in, readable markings on the bender heads and a • Color-coded, hexagonal rotating dies • Simple, one-hand operation
finish that provides for the best visibility in low-light • Full cycle mechanism releases only • Compact – convenient for working in
• Strong, stable square hook design after full crimp cycle is completed tight places and stores easly in tool
pouches
Cable Stripping Tool Non-Contact Voltage • Blade release allows blades to be
Detector opened in mid-cut
Item #G2090
Capacity: Item #GT-12A
• 8 AWG to 750 kciml
• Intuitive Blade Design allowing for user to • Single button operation
• CAT IV 1000 V rated for maximum safety
maintain contact with the cable at all times • Automatically shuts off after 5 minutes of
• Cable jacket lifting edge
• Blade lacerations comprise approximately 40% of all inactivity to extend battery life
recordable injuries on the jobsite.
FASTER. SAFER. EASIER®.
Hand Tools Clamp Meter
Quick Change Carbide Cutter Kit, 8PC Item #CMI-600
Item #648 • Amperage Measurement: 60, 600
Amps AC+DC
• Quick Change Arbor – change cutter heads with a
simple push and turn • Measurement Category:
CAT III 600V, CAT IV 300V
Specifications:
• Application: Cut fast, accurate holes in stainless • Measures AC+DC current and
DC microamps
steel, mild steel, iron, copper, brass, aluminum,
fiberglass and plastic sheet up to 3/16" thick • Tests continuity and diodes
• Cutting Edge: Tungsten Carbide Teeth • Phase Sequence & Motor
• Hole Size: 6 sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"
Rotation tests
1/2" x 2" Hydraulic Driver Punch Set • Peak-RMS measures motor in
Item #7306SB rush current
• Fast, easy and simple to operate • Data hold
• Compact design for field use on • Two voltage detection modes -
construction sites and maintenance jobs non-contact or using a single test lead
• Punches 10 times faster than wrench method
• Will also drive 751 Cable Cutter head Fish Stix Kit 1/4" x 12'
• Can be used with most standard
Item #540-12
round Slug-Buster® and
Slug-Splitter SC® punches
(not 1/2", 9/16", 5/8")
INTELLI-PUNCH™ 11-Ton Tool • Highly visible green color rods can be easily
threaded together
Item #LS100X11A
• 1/4" diameter fiberglass adds rigidity when
Application: connecting multiple sections
• Punch conduit size holes in mild steel, aluminum,
• 200 LBS maximum pulling strength
fiberglass and plastic • Two different threaded tips accommodate
• Capacity: 11-Ton
• Capacity Mild Steel: various bundles of wire or cable
• 4" Conduit up to 10 gauge 6 Ton Dieless Crimping Tool
• 6" Conduit up to 14 gauge
• Capacity Stainless Steel: Item #EK6IDL11
• 4" conduit up to 10 guage
Capacity:
Dieless Crimping Tool Gorilla Press • Copper #8 -500 kcmil (MCM)
• Aluminum 1/0 - 350 kcmil (MCM)
Item #EK12IDL11 Item #PSTLP-KIT001 • Crimp Cycle Time: Max. 7 seconds
• Crimping Force:
• Intelligent Crimping System Technology includes • Safely install fittings without
a pressure sensor that monitors the crimping soldering or welding Variable 3-6 Ton (30-60Kn)
force of each crimp and provides the operator a • Estimated Cycles per Charge:
visual and audible alert if the force is below • Saves time when performing
specifications multiple presses 100-300 based on cable size
• Tools automatically retract when the crimping • Secure grip for easy one-handed
cycle is complete operation
• Crimping Capacity: 4 AWG -1000 kcmil copper • Enables quick exchange
color coded lugs and splices, 6 AWG -1000 kcmil of pressing jaws
aluminum color coded lugs and splices 1000 kcmil
• Crimping Force
12.000 ton
Our sales, repair, and customer service teams received
extensive training from Greenlee for the full
line of products we offer.
MICHIGAN’S
ONLY AUTHORIZED
WARRANTY SERVICE CENTER
Industrial Equipment Rental & Service
MidlandTool.com • 877-44MIDLAND • SuperiorToolRental.com