2018 Superior Tool Rental & Repair Catalog

®

2018 CATALOG • FOUNDED 1995

INDUSTRIAL EQUIPMENT RENTAL & SERVICE

superiortoolrental.com • 877-446-4352

Building YOU a Better Company

Welcome to the 2018 Superior Tool Rental & Repair catalog.

We’ve worked hard to gather all the rental and repair information
you need for the upcoming year into one, easy to use resource.
If there is something that you cannot find in this catalog or need
more information about, please do not hesitate to contact our
customer service staff or visit our website.

Brian Boychuk, President, Owner & CEO

Superior was founded in 1995 as a rental subsidiary of Midland Tool & Supply.
Founded in 1962 as a full-line, industrial construction supplier, Midland Tool & Supply possesses over 50 years of
industry experience. Under the same ownership and roof, Superior Tool Rental & Repair inherited Midland’s industry
expertise and innovative thinking. Between the two companies, there is no job or project that our knowledgeable staff

and extensive inventory cannot handle.
Our fleet consists of the most up-to-date tools and equipment on the market, sourced from leading

manufacturers in the construction industry.
Superior takes great pride in its high-quality rental fleet, and all of our tools and equipment are carefully housed and
organized in our facility. Our trained employees inspect, re-touch, paint, test, and certify each piece of equipment to
ensure safe and proper operation, both before and after rental. And for your convenience, Superior’s rentals are also
easily identifiable by their engraved markings, creating a quick accountability method on the job site, or when gang

boxes are simultaneously unloaded.
As your needs change and grow, so will our rental fleet.
Since 1995, Superior’s rental fleet has been built to meet and exceed our clients’ needs. They asked for it, we stocked it.
At present, we’re adding new rental products almost weekly. If you are looking for a tool or piece of equipment that you
cannot find in our online inventory or catalog, please call our customer service department to inquire if it has been

recently added or to put in a request for it.
We’re ready to build you a better company.
Superior Tool Rental & Repair has the equipment you need to get the job done, and done right. The first time. We
encourage you to take a look at our rental inventory, service and repair offerings, and to contact us to find out how we
can make your job site the most effective and efficient environment possible.

2

Shipping

Superior Tool Rental & Repair delivers nationwide.
We ship our products via FedEx SameDay®, FedEx Overnight®, and FedEx standard to all 50 states.

Superior also has an extensive and privately-owned fleet of delivery trucks, including:

• Semi-Tractors • Semi Flat Bed Trailers • Stake Trucks
• Enclosed Semi Trailers • Box Trucks • Pickup Trucks

www.SuperiorToolRental.com 877-446-4352 3

On-Site Tool Trailer Service

Midland Tool & Supply can provide large projects with on-site consignment tool trailers.
Our consignment tool trailers allow clients 24-hour access, so that high demand needs can be met immediately,
Our tool trailers are ideal for:
• Outages • Shutdowns • Turnarounds • Any Construction Project
We are committed to product storage and organization.
Just like our warehouse, Midland’s consignment tool trailers are exceptionally organized. Each trailer is equipped with
efficient shelving and stackable plastic bins that are clearly labeled. Our tool trailers also have special organizational
features, such as e-track hanger posts for air hose whips, stingers, grounds, and nylon slings.
Midland’s tool trailer organization system provides an exact place for every item, allowing for easy worker access and
replenishment on the job site. We also maintain an adequately stocked warehouse to allow for fast and/or frequent tool
trailer replenishment. And in some instances, we even maintain dedicated, job specific warehouse inventory.
Midland Tool & Supply provides more than just a consignment tool trailer. We provide a complete tool and
consumable trailer management service.
With our inventory management system, we can oversee your entire tool trailer experience, no matter how large or
demanding your job site is. From the placement of your initial order, to delivery, inventory accountability and trailer
introduction – Midland’s staff will be in constant communication with your job site’s management team to ensure your
project stays on budget and on time.

4

Welding & Accessories

www.SuperiorToolRental.com 877-446-4352 5

WELDING

Maxstar® 161 S Allows for any input voltage hookup (120–240V) PROCESS General Specifications
with no manual linking, providing convenience • Stick (SMAW)
907709 in any job setting. Ideal solution for dirty or Model 907709
unreliable power. Input Power Weldable Metals Steel, Stainless Steel
• 120–240 V, Current Type
Specifications 1-phase power Dimensions DC
Net Weight H 10.3" x W 5.6" x D 13.5"

13 lbs.

Welding Rated Output Amps Input at Rated KVA at Max. Open-
Welding Input Amperage Output, 50/60 Hz Duty Cycle KW Circuit Voltage
Mode Power Range

Stick 120 V, 20–90 A 60 A at 22.4 VDC, 100% duty cycle 14.68 1.75 1.71 48 VDC
(SMAW) 20 A 20–160 A 90 A at 23.6 VDC, 30% duty cycle 23.16 2.78 2.76 (12–16 VDC)
110 A at 24.4 VDC, 100% duty cycle 14.31 3.43 3.30
240 V 160 A at 26.4 VDC, 20% duty cycle 22.55 5.41 5.25

Maxstar® STR 210 120-480 V

Unit provides maximum flexibility PROCESSES General Specifications

by automatically connecting to any • TIG (GTAW) Model 907682
input power while maintaining the best • TIG DC (GTAW-DC)
DC Stick welding performance in its • Stick (SMAW) Weldable Metals Steel, Stainless Steel
product class.
Current Type CC / CV, DC
Specifications
Dimensions H 13.6" x W 8.6" x D 19.5"

Net Weight STR: 36 lbs.
Base/DX: 38 lbs.

Welding Input Welding Amps input at Rated Load Output, 50/60 Hz Max, Open-

Mode Power Amperage Range Rated Output Phase 120 V 208 V 240 V 400 V 480 V KVA KW Circuit Voltage

208–480 V 1–210 A 210 A at 18.4 V, 3-phase – 14 12 7 6 5.2 4.9 80 VDC
TIG (GTAW) 1–210 A 60% duty cycle 1-phase – 24 20 12 10 4.9 4.9
125 A at 15 V, 1-phase 22 – – – – 2.6 2.6
120 V 60% duty cycle

208–480 V 5–210 A 160 A at 26.4 V, 3-phase – 15 13 8 6 5.5 2.8 (11 VDC)
Stick (SMAW) 5-100 A
60% duty cycle 1-phase – 26 22 13 11 5.3 5.3
120 V
90 A at 23.6 V, 1-phase 22 – – – – 2.6 2.6
60% duty cycle
907682

6

WELDING

XMT® 350 CC/CV

Portability and excellent arc performance make the XMT family the most popular in the industry.
The XMT 350 CC/CV is the most popular model for its flexibility and simplicity.

PROCESSES General Specifications

907161014 • Air Carbon Arc Cutting and Gouging (CAC-A) Model 907161014
• MIG (GMAW) Weldable Metals Aluminum, Specialty Metals, Steel, S.S.
• Pulsed MIG (GMAW-P) Carbon Diameter
• Flux Cored (FCAW) Input Hz 1/4"
• Stick (SMAW) Current Type 50 / 60 Hz
• TIG DC (GTAW-DC) Dimensions CC / CV, DC
Weight H 17" x W 12" x L 20-3/4"

80 lbs.

Specifications 208 V Three-phase 907161014 Single-phase KW
40.4 190–630 V 190–630 V 11.2
Model 350 A at 34 VDC, 60% duty cycle KW 208 V
Input Power 13.6 60.8 300 A at 32 VDC, 60% duty cycle
Input Voltage Limits 10–38 V 10–38 V
Weld Output 5–425 A 5–425 A
Voltage Range in CV Mode 350 A at 34 VDC, 60% duty cycle
Amperage Range in CC Mode 230 V 400 V 460 V 575 V KVA 350 A at 34 VDC, 60% duty cycle
Rated Output 36.1 20.6 17.8 14.1 14.2 230 V 400 V 460 V 575 V KVA
Amps Input at Rated 75 VDC 54.6 29.7 24.5 19.9 11.7
Load Output, 60 Hz Dinse or Tweco®
Max. Open-Circuit Voltage 75 VDC
Output Connections Dinse or Tweco®

XMT 350 CC CV - 4 Pack Rack XMT 350 CC CV - 6 Pack Rack XMT 350 CC CV - 8 Pack Rack

4-pack 907585 6-pack 907406 8-pack 907585 (2)

Specifications XMT® 350 Rack 8 Pack Rack
907585 (2)
4 Pack Rack 6 Pack Rack
208–575 VAC, 50/60 Hz, 3-phase,
Model 907585 907406 with Auto-Line®
Input Power to Rack 208–575 VAC, 50/60 Hz, 3-phase, 208–575 VAC, 50/60 Hz, 3-phase, XMT 350 CC/CV

Welding Power Source with Auto-Line® with Auto-Line® XMT 350
XMT 350 CC/CV XMT 350 CC/CV Up to 5/16"
Power Source H: 59.375" W: 86" D: 34.375"
Single Power Source (in.) Air Carbon Arc Electrode Size
Dimensions 1198 lbs.
Weight XMT 350 XMT 350
Up to 5/16" Up to 5/16"
H: 59.375" W: 43" D: 34.375" H: 59.375" W: 43" D: 34.375"

599 lbs. 759 lbs.

www.SuperiorToolRental.com 877-446-4352 7

WELDING

Big Blue 450 Duo CST

The Big Blue 450 Duo CST is a rugged, compact, fuel efficient diesel welder/generator that provides

2 superior arcs in one economical package. General Specifications

PROCESSES Model 907477
• Air Carbon Arc Cutting and Gouging (CAC-A) Weldable Metals Steel, S.S.
• TIG DC (GTAW-DC) Carbon Diameter
• Stick (SMAW) Input Hz 3/16"
Current Type 50 / 60 Hz

DC

Amperage Range 5 – 450

Weld Output CC

Net Width W 26-1/4" x H 32" x L 56"

907477 Ship Weight 1114 lbs.

Specifications

Model 907477
Weld Mode/Process
Output Mode CC/DC (Stick/TIG) CC/DC (Stick/TIG)
Weld Output Range
Weld Output Rated at 122º Separate (dual outputs) Paralleled (combined)
Max. Open-Circuit Voltage
Generator Power Output Rated at 122º F 5–225 A (each side) 5–280 A (one side only) 10–450 A
Sound Levels at Rated Output, 23 ft.
USA Model 175 A, 27 VDC, 100% duty cycle USA Model 350 A, 27 VDC, 100% duty cycle

77 VDC 77 VDC

3 phase: 12,000 watts, 240VAC, 60 HZ 1 phase: 10,000 watts, 120/240 VAC, 60 Hz continuous

77 VDC 77 VDC

ArcReach® Stick/TIG Remote

Trailer Mounted Optional Remote control of the power source without a cord.
Portable and lightweight, the ArcReach Stick/TIG Remote paired with a Dimension,
XMT or compatible engine-driven ArcReach power source allows you to change
weld settings at your work area, saving a trip to the power supply. No extra control
cable to purchase, maintain, string or unstring–– saving time and money.

Processes Communications Via existing weld cable to
Stick (SMAW) Dimension,™ XMT® or compatible engine-driven
TIG (GTAW) ArcReach power sources
Air carbon arc gouging (CAC-A)
Operating Voltage 14–90 VDC

Big Blue 800 Duo Pro A complete multi-process & multi-operator welder / General Specifications
generator that delivers two independent pipe quality
907587 arcs in one complete package. Model 907587

Specifications PROCESSES Weldable Metals Steel, S.S.
Air Carbon Arc Cutting and Gouging (CAC-A)
Model MIG (GMAW) Carbon Diameter 1/2"
Weld Mode/Process Submerged Arc (SAW)
Output Mode Flux Cored (FCAW) Input Hz 50 / 60 Hz
Weld Output Range Stick (SMAW)
Weld Output at 100% Duty Cycle TIG DC (GTAW-DC) Current Type DC
Rated at 104º F
Max. Open-Circuit Voltage Amperage Range 20 – 800
Generator Power Output Rated at 104º F
Sound Levels at Rated Output, 23 ft. Weld Output CC / CV

Net Width 28-1/2"

Net Height 46"

Net Length 69-1/2"

Net Weight 1869 lbs.

907587

CC/DC (Stick/TIG) CV/DC (MIG/FCAW)

Separate (dual outputs) Paralleled (combined) Separate (dual outputs Paralleled (combined)

20–400 A 40–800 A 14–40 V 14–40 V

400 A at 36 V 700 A at 44 V 400 A at 34 V 750 A at 40 V

(each side) 800 A at 38 V (each side) 800 A at 38 V

85 VDC 15 VDC
3-phase: 27,000 W peak, 20,000 W continuous 1-phase: 15,000 W peak, 12,000 W continuous

Idle: 71.3 dB (96.1 Lwa), 75.3 dB at one meter from front panel

Weld (800 A load): 78.9 dB (103.7 Lwa), 82.8 dB at one meter from front panel

8

WELDING & ACCESSORIES

Big Blue 350 PipePro

Next-generation, rugged, low speed diesel welder/generator General Specifications
designed for the transmission pipeline contractor.
Model 907428

Weldable Metals Steel, Stainless Steel

PROCESSES Carbon Diameter 1/4"
• Air Carbon Arc Cutting
Input Hz 50 / 60 Hz
and Gouging (CAC-A)
• MIG (GMAW) Current Type DC
• TIG DC (GTAW-DC)
• Flux Cored (FCAW) Amperage Range 20 – 400
• Stick (SMAW)
Weld Output CC / CV

Net Width 26-1/4"

907428 Net Height 32"

Net Length 56"

Trailer Mounted Included Net Weight 1018 lbs.

Specifications CC/DC (TIG) 907428 CV/DC (FCAW/MIG)
20–400 A CC/DC (stick) 14–40 V
Model
Weld Mode/Process 20–400 A
Weld Output Range
Weld Output at 100% Duty Cycle 300 A at 32 VDC, 350 A at 27 VDC, 400 A at 24 VDC
Rated at 104º F
Max. Open-Circuit Voltage 85 VDC, 15 VDC
Generator Power Output Rated at 104º F 12,000 watts peak, 10,000 watts continuous 1-phase, 84/42 A, 120/240 VAC, 60 Hz
Sound Levels at Rated Output, 23 ft.
Idle: 68.7 dB (93 Lwa) Weld 72.1 dB (97 Lwa)

PROCESSES Trailblazer® 275 LP Trailblazer® 325 Gas Trailblazer® 325 Diesel
with Excel™ power, GFCI
• Air Carbon Arc Cutting 300-amp 300-amp
and Gouging (CAC-A) 275-amp

• MIG (GMAW)
• TIG (GTAW)
• Flux Cored (FCAW)
• Stick (SMAW)
• Plasma (PAC)

Cart Mounted Included 907691 907510 907566

Trailblazer® welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer
exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance. No other
compact machine in the 275-amp, 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less
noise – for productive, profitable, quieter jobsites.

Specifications 907691 Trailblazer 275 907510 Trailblazer 325 Gas 907566 Trailblazer Diesel

Model CC/DC CV/DC CC/DC CV/DC CC/DC CV/DC
Welding Mode
Process Stick (TIG) MIG (FCAW) Stick (TIG) MIG (FCAW) Stick (TIG) MIG (FCAW)
Amp / Volt Ranges
Rated Weld Output at 104º F 20–275 A 10–35 V 10–325 A 10–35 V 10–325 A 10–35 V

Single-Phase Generator Power 275 A at 28 V, 100% duty cycle 325 A at 28 V, 100% duty cycle 325 A at 33 V, 100% duty cycle

Sound Levels at Peak: 12,000 watts, 11,000 watts with LP Peak: 12,000 watts, 11,000 watts with LP Peak: 12,000 watts
Rated Output, 23 ft.
Continuous: 10,500 watts Continuous: 10,500 watts Continuous: 10,500 watts

Weld: 150 A load: 65 dB (90 Lwa), Weld: 150 A load: 65 dB (90 Lwa), Weld: 150 A load: 75 dB (100 Lwa),

325 A load: 73.5 dB (98.5 Lwa) 325 A load: 73.5 dB (98.5 Lwa) 325 A load: 81.5 dB (106.5 Lwa)

General Specifications Steel, Stainless Steel Steel, Stainless Steel Steel, Stainless Steel
1/4" 1/4" 1/4"
Weldable Metals DC DC DC
Carbon Diameter 20" 20" 20"
Current Type 28" 28" 28"
Net Width 40.5" 40.5"
Net Height 45.375"
Net Length 459 lbs. 460 lbs. 620 lbs.
Net Weight

www.SuperiorToolRental.com 877-446-4352 9

WELDING & PLASMA CUTTING The Thermal Dynamics Cutmaster 60i is on the Loose
It’s seriously powerful, can slash through a multitude of metals, and never backs down,
Cutmaster 60i from first cut to cleanup. The Cutmaster 60i is only from Esab. And the question is: Are
you ready to unleash this beast?
Plasma powermax 85
Specifications K3198-1
10-60 A, continuously adjustable
Model
Amperage Output 7.6 kW
Rated Output Power 300 V
Open-Circuit Voltage (OCV) 208–480 VAC ± 10%
Input Voltage 1 ph
Number of Phases 50/60 Hz
Supply Frequency 50% @ 60 A / 60% @ 50 A / 100% @ 49 A
Rated Duty Cycle 43 A @ 208 V / 39 A @230 V / 19 A @ 480 V
Amperage Draw IP23S
Enclosure Rating 9 ft. single phase 8 AWG 3/C with NEMA 6-50P Plug
Input Power Cable and Plug 20 ft. #8 work cable with connection
Work Lead with Ground Clamp Compressed air
Gas Requirements 32ºF–122ºF
Operating Temperature Range 90–125 psi max (8.6 bar)
Input Pressure 300–500 scfh / 5–8.3 cfm (142–235 I/s)
Air Flow Requirements (cutting and gouging) Particulates to 5 Microns
Power Supply Gas Filtering Ability 5/8"
Recommended Cut 1-1/2"
Maximum Sever 5/8"
Pierce Rating 100% at 60 A @ 400 scfh air flow
Torch Duty Cycle 75 psi (5.2 bar)
Torch Air Pressure 6.7 cfm (190 I/s)
Torch Air Consumption SL60QD 1 Torch (supplied)
SL60/SL 100 1 Torch
Torches (for use with the Cutmaster 60i) SL100 Mechanized 1 Torch
SL100SLV Automated 1 Torch
Dimensions H 14.15" W 7.85" L 21.12"
Weight 37 lbs.

The Hypertherm® Powermax85® professional-grade
Plasma metal cutting and gouging system for handheld cutting 1" and mechanized piercing 3/4"

Maximum productivity
• Finish jobs faster with cut speeds two and a half times greater than oxyfuel on 1/2" mild steel.
• Spend less time on grinding and edge preparation due to superior cut and gouge quality.

250% faster Specifications Powermax85®
on 1/2" Model 200-480 V, 1-PH, 50/60 Hz
Input Voltage 200-600 V, 3-PH, 50/60 Hz
Cut speed
Kilowatt Output 12.2 kW
Input Current @ 12.2 kW 200/208/240/480 V, 1-PH 70/68/58/29 A
200/208/240/480/600 V, 3-PH 42/40/35/18/17 A
Output Current
Rated Output Voltage 25-85 A
143 VDC
Duty Cycle @ 104º F 60% @ 85 A, 230-600 V, 3-PH
1/2" 3/4" 1" 60% @ 85 A, 230-600 V, 3-PH
60% @ 85 A, 230-600 V, 3-PH
Capacity Thickness Cut speed Open Circuit Voltage (OCV) 60% @ 85 A, 230-600 V, 3-PH
Dimensions with Handles 60% @ 85 A, 230-600 V, 3-PH
Cutting Weight w/25' Torch 60% @ 85 A, 230-600 V, 3-PH
Gas Supply 305 VDC
Recommended 1" 20 ipm Recomended gas inlet D 19.7" - W 9.2" - H 17.9"
flow rate/pressure
1-1/4" 10 ipm Input Power Cable Length 71 lbs
Power Supply Type Clean, dry, oil-free air or nitrogen
Serverance (hand cutting) 1-1/2" 5 ipm Engine Drive Requirement Cutting: 400 scfh, 6,7 scfm @ 85 psi
Certifications Gouging: 450 scfh, 7,5 scfm @ 70 psi
Pierce* 3/4"
10'
Capacity Metal removal rate Grove profile Inverter - IGBT
20 kW for full 85 A Output
Gouging CSA-certified for use in the Americas and Asia, except China

Typical gouge 19.5 lbs per hour 23" D x .28" W

* Pierce rating for handheld use or with automatic torch height control

10

WELDING PROCESSES • Stick, TIG, Gouging

Invertec® V275-S Specifications

K2269-1 Model K2269-1

Input Power 220/380/400/415/440/3/50 220/380/400/415/440/1/50

Rated Output 250A/30V/35% 200A/28V/100%
Current / Voltage / Duty Cycle

Input Current at Rated Output 32/20/19/18/17A 25/15/15/14/13A 63/42/40/38/36A 48/32/30/29/27A

Output Range 5-275-A

Weight 54.5 lbs.

Dimensions H 13.6" W 9" D 20.24"

Flextec® 350X

PROCESSES • Stick, Flux-cored, MIG, TIG, Gouging
• Capable of Arc Gouging with 3/16" carbons

Specifications K4271-1
380/460/575/3/50/60
Model
Input Power 300A/32V/100% 350A/34V/60%
Rated Output
K4271-1 Current / Voltage / Duty Cycle 26/23/18
Input Current at Rated Output 5-425A Max OCV 80V DC
Output Range
Weight 77 lbs.
Dimensions H 17" W 13" D 23"

4-Pack Rack Flextec4-® 350X

Compact, Rugged and Complete FEATURES
• One easy connection Allows power sources to be connected with one primary power drop
• The power sources are factory installed in the rack and wired to the main power distribution panel
• Entire system meets National Electrical Code (NEC)
• Individual fuses – Provide overcurrent protection for each power source

PROCESSES
• Flextec 350: Stick, TIG, MIG, Flux-Cored, Gouging

K3402-1 Flextec 350X 4-Pack Rack Specifications K3402-1 4-Pack Rack Flextec 350X Construction Model (Compact)
Tweco
Model
Output Connection 380/460/575/3/50/60
Rack Input Power {1} 350A/34V/60% - 300A/32V/100%
Rated Output Current/Voltage/Duty Cycle {2}
Rack Input Current @ Rated Output 74/68/68 (4-Pack)
Output Range 5-425 Amps
Weight 620 lbs.
Dimensions
H 59.72" W 37.5" D 32.88"

www.SuperiorToolRental.com 877-446-4352 11

WELDING

Flextec® 650X

PROCESSES • Stick, TIG, MIG, Flux-cored, Submerged Arc, Gouging

Specifications K3425-1
380 / 460 / 575 / 3 / 50 / 60
Model
Input Power 750A/44V/60% 650A/44V/100% GTAW: 750A/34V/60% GTAW: 650A/34V/100%
Rated Output
Current / Voltage / Duty Cycle 61/50/40 57/47/38 – –
Input Current at Rated Output GTAW: 10-815A SMAW: 15-815A
K3425-1 Output Range 10-815A

4-Pack Rack Flextec4®- 650

FEATURES
• One easy connection Allows power sources to be connected
• Individual fuses – Provide overcurrent protection for each power source
• Two overhead lifting eyes, two fork lift slots, and four heavy duty optional casters – Provide ease of

portability
• Common disconnect – Units have a 200 amp, 600 volt, 3-phase disconnect switch
• Fold Down fuse panel – Makes it more convenient to access wiring and change fuses
• Compact, Rugged and Complete

PROCESSES
• Flextec 650: Stick, TIG, MIG, Flux-Cored, Gouging

K3144-1, Flextec 650 4-Pack Rack Specifications K3144-1, Flextec 650 4-Pack Rack
Lug
Model
Output Connection 380 / 460 / 575 / 3 / 50 / 60
Rack Input Power {1} 650A /44V/100%-750A/44V/60%
Rated Output Current/Voltage/Duty Cycle {2}
Rack Input Current @ Rated Output 202 / 167 / 103A
Output Range 10-815 Amps

Multi-Weld 350 K1735-1 FEATURES
• Independent arcs. Starting or stopping one Multi-Weld doesn’t affect the welding of the others
Connect Several DC+ Welders to • The Multi-Weld 350 is capable of continuous operation at 350 amps in 122ºF air temperature
One Power Supply • No control cables are needed. Single weld cable output from the power source to one or several

Distribution Box Multi-Weld 350s
• Controls are located close to the operator for quick access
K1736-1 • High efficiency design uses less than half the power of other grid systems
• Lincoln CT Chopper Technology for quality welds with instant control of the arc for superior welding results
• Constant voltage (CV) for MIG or Flux-cored wire welding
• Constant current (CC) for stick welding or arc gouging
• Additional stick welding controls include hot start, arc force, electrode type selection (E7018 and E6010)
• Arc gouging capability with a single Multi-Weld 350 and up to 5/16" electrode, or with
paralleled units for up to 700 amps of power using a 3/8" electrode

PROCESSES (DC+ Processes Only) • Stick, MIG, Flux-Cored, Gouging

Specifications Multi-Weld 350 K1735-1
80V DC (50-113 Peak Range)
Model
Input Volts 350A / 34V / 100% DC+
Rated DC+ Output Current/Voltage/Duty Cycle 165A
Input Current Rated at DC Output (80V DC)
Output Range 15-40 Volts, 30-350 amps, Max. OCV: 78V
Dimensions H 11.6" x W 10" x D 21.5"
Weight 59 lbs.

FEATURES
• Makes connecting up to 5 Multi Weld® 350s quick and easy. Contains copper bus bar for connecting

multiple “pig-tails”
• Four “pig tails” included.

12

WELDING

LN-25X MIG Feeder Miniflex K3972-3

Full control of your system with no control cables Portable Fume Extraction System

FEATURES PROCESSES
• Stick (Light Duty), TIG, MIG,
• Remotely controls preset voltage without a control cable
Flux-Cored (Light Duty)
• Industry-proven Maxtrac® Wire Drive System provides reliable feeding and easy changeovers

• Trigger lnterlock switch provides operator comfort over long welds

• Arc Hour Meter for tracking maintenance and productivity

• Digital Meters display voltage, current and wire feed speed PROCESSES

Specifications • MIG, Flux-Cored

Model K4267-1

Input Volts 15-110 VDC

(50-113 Peak Range) Specifications
Model
Output Capacity 450A/60% Sound Level Miniflex® K3972-3
Current/Duty Cycle Airflow CFM 80 dBA
Power Rating HP
Flow Meter Yes Input Power Voltage/Phase/Hertz Low: 95 High:108
Input Current 2.4 (1/2/motor)
Wire Feed Speed Range ipm 50-700 Dimensions 120/1/50/60
Weight 12.0A
Solid: 0.023-1/16"
H 29" x W 15.6" x L 16.8"
Wire Size Range Cored: 0.030-5/64" 40 lbs.

Aluminum: 0.035-5/64"

K4267-1 Dimensions H 15" x W 8.7" x L 23.2"

Weight Approx 37 lbs.

www.SuperiorToolRental.com 877-446-4352 13

WELDING

Classic 300 MP Perkins® Engine Model

Applications Rated Output Current/Voltage/Duty Cycle
• Pipeline, Maintenance and Repair, Construction • 300A D/32V/60%
Output Range • 250A DC/30V/100%
• 40-350A DC Welding (5 step current control)
• 3000 Watts AC Generator Number of Cylinders 3

Specifications PROCESSES
• Stick, Tig, MIG, Flux-Cored, Gouging

Model K4263-1 K4263-1
Description 300 Amp DC Arc Welder / All Copper Windings / Pure DC Power Generator K2686-4
Rated DC Output
Current / Voltage / Duty Cycle NEMA Ratings 300A/32V/60% 250A/30V/100%
DC Current Fine Adjustment Range 90V DC Max OCV
Auxiliary Power (1)
Dimensions 40-350 Amps 220-Max 160-240 120-190 80-130 Min-90
Weight 3,000 Watts 60 Hz, AC 20 A @ 120V with sealed GFCI Module 13 A @ 240V

H 37.1" x W 24.3" x L 62.8"
1364 lbs.

Vantage® 500

• Stainless steel panels offer added durability

• Select one of five welding process modes

• Plenty of AC Generator power

• Tier 4i Perkins® diesel engine

Specifications PROCESSES
• Stick, TIG, MIG, Flux-cored, Gouging

Model K2686-4
Rated Output, Current/Voltage?Duty Cycle 500A/40V/100%, 525A/38V/60%
30-525A DC, 40-300A Pipe, 20-250A DC TIG, 14-40V CV, 30-525A Gouge
Output Range 3-Phase AC Power: 22 kW Peak, 20 kW Continuous
1-Phase AC Power: 13 kW Peak, 12 kW Continuous
Dimensions H 37.1" x W 24.3" x L 62.8" To top of exhaust tube: 45.5"
Weight
1290 lbs.

SAE-500®

The SAE-500® are the preferred choice for their
great arc performance, design simplicity, reliability and
ruggedness! Designed especially for pipeline welding
and feild construction

Specifications PROCESSES K4053-1
• Stick, TIG, Flux-cored (with AV adapter) Gouging
Model
Applications K4053-1
Output Pipeline, Construction, Maintenance
Rated Output Current/ 80-575A DC Welding 3000 Watts AC Generator
Voltage / Duty Cycle
Dimensions 500A / 40V / 60%
Weight
H 45.8" x W 28" x L 83" To top of exhaust tube: 54.3"
2111 lbs.

Crosslinc™ Remote FEATURES
• Compatible with any CrossLinc™ -equipped Flextec® welder to adjust welding setting remotely at the arc,
K4345-1
including voltage on a wire feeder or current for stick or TIG welding.
• Remotely control output using existing non-CrossLinc-equipped wire feeders
• Added Protection – Sturdy steel case and rugged rubber corner bumpers
• Compatible with Stick, TIG or Wire welding processes., CC (constant current), CV (constant voltage),

DC+ and DC-
• Display preset and actual welding voltage or current

14

WELDING

5 Pack Welder & 30 KVA Power Pack SP-30-5W

Features
• Distributes 120 and 208 volt 1-phase power
• Completely portable
• Mounted on a 4-wheel cart with casters and Fork Lift Pockets for

effortless mobility, which includes 4 lifting eyes on all 4 corners
• Primary voltage is 480/3 phase 100 amp main circuit breaker,

which is stepped down with the 30 KVA transformer
• Secondary power is 120/208 volt 100 amp, which is mounted in

a stainless steel, weather-tight enclosure with a circuit breaker
viewing window
• (10) 120 volt – 20 amp duplex receptacles are provided on each
side of the unit, for use with power tools and portable lifting
• (2) 120/208 volt – 50 amp twist-lock receptacles are also included
for use with our SPB-6 in remote areas
• Power center which includes (6) 120 volt– 20 amp
• 20A 1-Pole G.F.C.I. Breakers Individually protect each duplex receptacles
• Unit includes 5 functional XMT 350 Miller Welders for your Remote
Welding Applications
• Includes a Roof with a 20 Degree Pitch for Additional Weather Protection
• UL listed and NEMA 3R certified

Specifications:
(10) 120 volt - 20 amp Hubble duplex receptacles with spring-back
weatherproof covers, all connected to 20 amp G.F.C.I. circuit
breakers(2) 120/208 volt 50 amp Hubble twist-lock
receptacles with spring-back weatherproof
covers, both are connected to 50 amp
G.F.C.I. circuit breakers

SP-30-5W

www.SuperiorToolRental.com 877-446-4352 15

AUTHORIZED SERVICE CENTER

AUTHORIZED SERVICE CENTER

Superior Tool Rental & Repair Facility

All equipment is checked for safe and proper operation before leaving our shop. Thank you for selecting Superior Tool
Rental & Repair for your rental equipment and service needs. Our goal is 100% customer satisfaction every time.

16

LIGHT TOWER

Specifications HIGH PERFORMANCE, LED LUMINOSITY
The CPLT V5+ comes with 4 + lamps x 350 kW that gives you even more durability
Model CPLT V5+ and light coverage.

Performance Data

Rated frequency 60 Hz

Rated voltage 240/120 V

Rated power (PRP) 2.7 kW

Operating temp. 14/122 ºF (min/max)

Sound power @ 7m (LPA) dB(A) 63

Engine

Model Kubota Z482 EOA Tier 4 f

Speed 1800 rpm.

Rated net output (PRP) 3 kW

Coolant Liquid cooled Diesel

Number of cylinders 2

Alternator - Sincro

Model Mecalte LT3-75

Rated output kVA 4.5

Insulation / enclosure

protection Class/IP H/23

Consumption

Fuel tank capacity 28 gal.

Runtime before refueling

@ 4kW load h 150

Battery 45 Ah. 390 CCA

Power output

Aux power MCCB 1 kW

Lights

Floodlights 4 x LED

Wattage 4 x 350 W

Luminosity 0.5fc @7 acres

Construction

Trailer M Unibody trailer w/ 4 point leveling

Tires 155R13

Tow hitch 2 inch ball / pintle combo

Enclosure Heavy-duty polythylene canopy

Dimensions and weight

Dim. in transport L: 66" x W: 43" x H: 98"

Dim. in operation L 114" x W: 91" x H: 296"

Weight 1544 lbs.

LOW NOISE LONG FUEL AUTONOMY
Sound level: 63 dB(A) With Fuel efficiency of .56 GPH
the 28 gallon fuel tank allows
EASY SERVICE ACCESS optimal run times between refueling
Wide wing doors allow 100%
access to the machine, including CPLT V5+
service components and drains.

SPILLAGE-FREE FRAME
Environmentally friendly frame design
prevents oil, fluids and fuel from leaking out
and contaminating the ground.

www.SuperiorToolRental.com 877-446-4352 17

18

Impact Wrenches & Sockets

Only industrial-grade impact wrenches are used in our fleet, designed for
the most rugged of applications where super duty is expected and required.
• Several hundred impact wrenches in our rental fleet of 3/4" pistol grip,

1" pistol grip/D-handle, and 1-1/2" D-handle, 2-1/2" and up to 3-1/2" (two-man) square drive impact wrenches.

www.SuperiorToolRental.com 877-446-4352 19

IMPACT WRENCHES 3/4" RIGHT ANGLE 3/4" & 1" PISTOL GRIP 1" INDUSTRIAL IMPACT
3/4" PISTOL GRIP

3/4" 1"

Square Drive 3/4" Square Drive 3/4" Stainless Steel 3/4 & 1" Also available in 1"
Max Torque 1,100 ft. lbs. Max Torque 550 ft. lbs. 1,700 ft. lbs. #5 spline drive 2,000 ft. lbs.
Rec’d Hose Size 1/2" Rec’d Hose Size 1/2" Square Drive 1/2" 1/2"
Weight 12 lbs. Weight 26 lbs. Max Torque 13.5 lbs. Square Drive 25 lbs.
Length 8-3/4" Length 17.5" Rec’d Hose Size 9" Max Torque 12-1/4"
Avg. Air Cons. 40 cfm Avg. Air Cons. 36 cfm Weight 48 cfm Rec’d Hose Size 58cfm
Length Weight
Avg. Air Cons. Length
Avg. Air Cons.

1" PISTOL GRIP 1" RIGHT ANGLE 1-1/2" ONE-MAN 2-1/2" TWO-MAN

Also available in 1" Square Drive 1" Also available in 1-1/2" Square Drive 2-1/2"
#5 spline drive 2,000 ft. lbs. Max Torque 750 ft. lbs. #5 spline drive 3,000 ft. lbs. Max Torque 50,000 ft. lbs.
1/2" Rec’d Hose Size 1/2" 1/2" Rec’d Hose Size 1"
Square Drive 23 lbs. Weight 36 lbs. Square Drive 15 lbs. Weight 215 lbs.
Max Torque 9-7/8" Length 19" Max Torque 14-1/2" Length 26-5/8"
Rec’d Hose Size 58 cfm Avg. Air Cons. 58 cfm Rec’d Hose Size 70 cfm Avg. Air Cons. 155 cfm
Weight Weight
Length Length
Avg. Air Cons. Avg. Air Cons.

All of our impact wrenches feature a through hole anvil for use with retainer rings.

WORLD’S LARGEST IMPACT WRENCH EXAMPLE

3-1/2"

The IR-599A1, 3-1/2" is the world’s largest
and most powerful square drive impact
wrench, with remote control.

Square Drive 3-1/2"
Max Torque 80,000 ft. lbs.
Rec’d Hose Size 1-1/2"
Weight 599 lbs.
Length 37-1/2"
Avg. Air Cons. 375 cfm

20

TITANIUM IMPACT WRENCHES

IR Model #2925RBP1Ti IR Model #3940B2Ti 1" Super Duty Titanium Industrial Air Impact Wrench.

3/4" Reverse Biased Titanium Duty Features:
Industrial Air Impact Wrench. • High performance motor package includes 7-vane rotor

titanium hammer case increases strength, reduces Square Drive 1"
weight and provides exceptional corrosion resistance. Max Torque 2,500 ft. lbs.
• Laser-etched product information lasts the life of the tool. Rec’d Hose Size 1/2"
• Twin hammer mechanism has the strongest, most Weight 21.2 lbs.
durable long-life mechanism in the industry. Length 13-1/2"
• Integrated reverse lever provides protection in the most Avg. Air Cons. 70 cfm
abusive applications.

Features: IR Model #3955B2Ti 1-1/2" Super Duty Titanium Industrial Air Impact Wrench.
• Titanium hammer case
• Ergonomic handle design Features:
• Three-piece motor housing • Titanium hammer case increases strength, reduces

Square Drive 3/4" weight, and provides exceptional corrosion resistance. Square Drive 1-1/2"
Max Torque 1,300 ft. lbs. • High performance reverse biased motor package Max Torque 5,000 ft. lbs.
Rec’d Hose Size 1/2" Rec’d Hose Size 1/2"
Weight 11.8 lbs. includes a 7-vane rotor. Weight 34.6 lbs.
Length 8-7/8" • Twin hammer mechanism is the strongest, most Length 16-1/2"
Avg. Air Cons. 60 cfm Avg. Air Cons. 80 cfm
durable, longest-life mechanism in the industry.
• Ergonomic handle improves operator comfort.

SUPERPOWER IMPACT WRENCHES

Highest power-to-weight ratio. An ATLAS COPCO SWIVELS COME STANDARD
extremely powerful motor and a highly ON ALL IMPACT WRENCH RENTALS
efficient clutch, in combination with low
weight housings, give the LMS8-series
unrivaled power-to-weight characteristics,
allowing for very fast torque build up.

3/4" Pistol Grip 1" Impact Wrench 1-1/2" IMPACT WRENCH

Also available in
#5 spline drive

Model LMS58 HR20 Model LMS68 GIR25 Model LMS88 GIR38
Square Drive 3/4" Square Drive 1" Square Drive 1-1/2"
Torque Range 221-590 ft. lbs. Torque Range 442-1400 ft. lbs. Torque Range 737-4054 ft. lbs.
Max Torque 884 ft. lbs. Max Torque 2036 ft. lbs. Max Torque 7370 ft. lbs.
Impacts Per Min 900 Impacts Per Min 780 Impacts Per Min 540
Free Speed r/min 5500 Free Speed r/min 5000 Free Speed r/min 3800
Weight 10.6 lbs. Weight 21.1 lbs. Weight 33.0 lbs.
Air Consumption under load 30.5 cfm Air Consumption under load 58.9 cfm Air Consumption under load 69.4 cfm
Air Inlet Thread 3/8" Air Inlet Thread 1/2" Air Inlet Thread 1/2"

www.SuperiorToolRental.com 877-446-4352 21

IMPACT SOCKETS PURCHASE or RENT

PURCHASE ONLY 1" DRIVE 1-1/2" DRIVE #5 SPLINE DRIVE

3/4" DRIVE 6 Pt. STANDARD & DEEP 6 Pt. STANDARD & DEEP STANDARD & DEEP

6 Pt. STANDARD & DEEP

Stand. Deep Nom. Stand. Deep Nom. Stand. Deep Nom. Ret- Stand. Deep Nom.
Part Part Size Ret- Part Part Size Ret- Part Part Size Ring Part Part Size
No. No. (in.) Ring No. No. (in.) Ring No. No. (in.) No. No. (in.)
RR10020S Z-9512 Z-9512L
Z-1208 Z-1208L 1/2 RR10032S 8824 8924 3/4 6583 Z-2421 Z-2421L 1-5/16 84575 Z-9513 Z-9513L 3/4
8826 8926 13/16 6583 84822 84922 1-3/8 84575 5828 Z-9514L 13/16
6818 6918 9/16 6581 84823 84923 1-7/16 84575 5830 Z-9515L 7/8
84824 84924 1-1/2 84575 5832 Z-9516L 15/16
6820 6920 5/8 6581 8828 8928 7/8 6583 84825 84925 1-9/16 84575 5834 Z-9517L 1
84826 84926 1-5/8 84575 5836 Z-9518L 1-1/16
6822 6922 11/16 6581 8830 8930 15/16 6583 84827 84927 1-11/16 84575 5838 Z-9519L 1-1/8
84828 84928 1-3/4 84575 5840 Z-9520L 1-3/16
6824 6924 3/4 6581 8832 8932 1 6583 84829 84929 1-13/16 84575 5842 Z-9521L 1-1/4
84830 84930 1-7/8 84575 5844 Z-9522L 1-5/16
6826 6926 13/16 6581 8834 8933 1-1/16 6583 84831 84931 1-15/16 84575 5846 Z-9523L 1-3/8
8836 8936 1-1/8 6583 84832 84932 2 84575 5848 Z-9524L 1-7/16
6828 6928 7/8 6581 84833 84933 2-1/16 84575 Z-9525 Z-9525L 1-1/2
84834 84934 2-1/8 84575 5852 Z-9526L 1-9/16
6830 6930 15/16 6581 8838 8938 1-3/16 6583 84835 84935 2-3/16 84576 Z-9527 Z-9527L 1-5/8
8840 8939 1-1/4 6583 84836 84936 2-1/4 84576 5856 Z-9528L 1-11/16
6832 6932 1 6581 84837 84937 2-5/16 84576 5858 Z-9529L 1-3/4
84838 84938 2-3/8 84576 5860 Z-9530L 1-13/16
6834 6934 1-1/16 6581 8842 8942 1-5/16 6583 84839 84939 2-7/16 84576 Z-9531 Z-9531L 1-7/8
8844 8944 1-3/8 6581A 84840 84940 2-1/2 84576 5864 Z-9532L 1-15/16
6836 6936 1-1/8 6582 84841 84941 2-9/16 84576 Z-9533 Z-9533L 2
84842 84942 2-5/8 84576 Z-9534 Z-9534L 2-1/16
6838 6938 1-3/16 6582A 8846 8946 1-7/16 6581A 84843 84943 2-11/16 84576 Z-9535 Z-9535L 2-1/8
84844 84944 2-3/4 84576 Z-9536 Z-9536L 2-3/16
6840 6940 1-1/4 6582A 8848 8948 1-1/2 6581A 84845 84945 2-13/16 84576 Z-9537 Z-9537L 2-1/4
84846 84946 2-7/8 84576 Z-9538 Z-9538L 2-5/16
6842 6942 1-5/16 6582A 8850 8950 1-9/16 6584 84847 84947 2-15/16 84576 Z-9539 Z-9539L 2-3/8
84848 84948 3 84576 Z-9540 Z-9540L 2-7/16
6844 6944 1-3/8 6582A 8852 8952 1-5/8 6584 84849 84949 3-1/16 84576 Z-9541 Z-9541L 2-1/2
8854 8954 1-11/16 6584 84850 84950 3-1/8 84576 Z-9542 Z-9542L 2-9/16
6846 6946 1-7/16 6582A 84851 84951 3-3/16 84576 Z-9543 Z-9543L 2-5/8
84852 84952 3-1/4 84576 Z-9544 Z-9544L 2-11/16
6848 6948 1-1/2 6582A 8856 8956 1-3/4 6585 84853 84953 3-5/16 84576 Z-9545 Z-9545L 2-3/4
8858 8958 1-13/16 6585 84854 84954 3-3/8 84576 Z-9546 Z-9546L 2-13/16
6850 6950 1-9/16 6582A 84855 84955 3-7/16 84576 Z-9547 Z-9547L 2-7/8
84856 84956 3-1/2 84576 Z-9548 Z-9548L 2-15/16
6852 6952 1-5/8 6582A 8860 8960 1-7/8 6585 84857 84957 3-9/16 84576 Z-9549 Z-9549L 3
8862 8962 1-15/16 6585 84858 84958 3-5/8 84576 Z-9550 Z-9550L 3-1/16
6854 6954 1-11/16 6582A 84859 84959 3-11/16 84576 Z-9552 3-1/8
84860 84960 3-3/4 84576 Z-9553 3-1/4
6856 6956 1-3/4 6582A 8864 8964 2 6585 84861 84961 3-13/16 84576 Z-9554 3-5/16
84862 84962 3-7/8 84576 Z-9556 3-3/8
6858 6958 1-13/16 6582A 8866 8966 2-1/16 6585 84863 84963 3-15/16 84576 Z-9558 3-1/2
84864 84964 4 84578 Z-9560 3-5/8
6860 6960 1-7/8 6582A 8868 8968 2-1/8 6585 84865 84965 4-1/16 84578 Z-9562 3-3/4
84866 84966 4-1/8 84578 Z-9564 3-7/8
6862 6962 1-15/16 6582A 8870 8970 2-3/16 6585 84867 84967 4-3/16 84578 4
8872 8972 2-1/4 6585 84868 84968 4-1/4 84578
6864 6964 2 6582A 84869 84969 4-5/16 84578
84870 84970 4-3/8 84578
6890 6966 2-1/16 6582A 8874 8974 2-5/16 6585 84871 84971 4-7/16 84578
8876 8976 2-3/8 6585 84872 84972 4-1/2 84578
6892 6968 2-1/8 6582A 84874 84974 4-5/8 84578
84876 84976 4-3/4 84578
6894 69100 2-3/16 6582A 8878 Z-1639L 2-7/16 6585 84878 Z-2478L 4-7/8 RR10035S
8880 8980 2-1/2 6585 Z-2480 84980 5 84578
6896 69102 2-1/4 6582A 84882 Z-2482L 5-1/8 RR10035S
Z-2483 Z-2483L 5-3/16 84578
Z-1237 69104 2-5/16 RR18708S 8882 8981 2-9/16 6586 84884 5-1/4 84578
84886 Z-2486L 5-3/8 84578
6898 69106 2-3/8 6582A 8884Z-1642L 2-5/8 RR10017S 84888 5-1/2 85578
84896 6 85579
68100 69108 2-7/16 6582C 8886Z-1643L 2-11/16 RR10017S 848104 6-1/2

68102 69110 2-1/2 6582C 8888 8988 2-3/4 6586
8890 8990 2-13/16 6586
68104 69112 2-9/16 6582C

68106 69114 2-5/8 6582C 8892 8992 2-7/8 6586
8894 8994 2-15/16 6586
68108 69116 2-11/16 6582C

68110 69118 2-3/4 6582C 8896 8996 3 6586

68112 69120 2-13/16 6582C Z-1649 Z-1649L 3-1/16 RR10017S

68114 69122 2-7/8 6582C 8897 89100 3-1/8 6586

68116 69124 2-15/16 6582C Z-1651 Z-1651L 3-3/16 RR10017S

68118 69126 3 6582C 8897A 89104 3-1/4 6586

Z-1653 Z-1653L 3-5/16 RR10017S
8898 89108 3-3/8 6586

Z-1655 Z-1655L 3-7/16 RR10017S
8899 89112 3-1/2 6586

Z-1657 Z-1657L 3-9/16 RR10019S
88116 89116 3-5/8 6587

Z-1659 Z-1659L 3-11/16 RR10019S

88120 89120 3-3/4 6587

Z-1661 Z-1661L 3-13/16 RR10019S

88124 89124 3-7/8 6587
Z-1663 Z-1663L 3-15/16 RR10019S

88128 89128 4 6587

Z-1665 Z-1665L 4-1/16 RR10019S

88132 89132 4-1/8 6587
Z-1667 Z-1667L 4-3/16 RR10019S

88136 89136 4-1/4 6587

Z-1669 Z-1669L 4-5/16 RR10019S

Z-1670 Z-1670L 4-3/8 RR10019S

Z-1671 Z-1671L 4-7/16 RR10019S
88144 89144 4-1/2 6587

22

IMPACT SOCKETS

PURCHASE or RENT

2-1/2" DRIVE-STANDARD 2-1/2" DRIVE-DEEP

6 Pt. STANDARD 6 Pt. DEEP

Stand. Nom. Ret- Stand. Nom. Pin Deep Nom. Ret- Deep Nom.
Part Size Ring Pin Part Size Ret- Part Size Ring Pin Part Size Ret-
No. (in.) R40127 P40127 No. (in.) Ring P40150 No. (in.) R40127 P40127 No. (in.) Ring Pin
Z-4026 1-5/8 R40127 P40127 5-1/4 85578 P40150 Z-4026L R40127 P40127
Z-4027 1-11/16 85576 85842 5-3/8 85578 Z-4027L 1-5/8 R40127 P40127 Z-4084L 5-1/4 R40127 P40127
85814 1-3/4 R40127 P40127 85843 5-1/2 85578 P40150 Z-4028L 1-11/16 R40127 P40127
Z-4029 1-13/16 85576 85844 5-5/8 85578 P40150 Z-4029L 1-3/4 R40127 P40127 Z-4086L 5-3/8 R40127 P40127
85815 1-7/8 R40127 P40127 85845 5-3/4 85578 Z-4030L 1-13/16 R40127 P40127
Z-4031 1-15/16 85576 85846 5-7/8 R40150 P40175 Z-4031L 1-7/8 R40127 P40127 Z-4088L 5-1/2 R40127 P40127
85816 2 R40127 P40127 Z-4094 6 R40150 Z-4032L 1-15/16 R40127 P40127
Z-4033 2-1/16 85576 Z-4096 6-1/8 85578 P40175 Z-4033L 2 R40127 P40127 Z-4090L 5-5/8 R40150 P40150
85817 2-1/8 R40127 P40127 85849 6-1/4 R40150 P40175 Z-4034L 2-1/16 R40127 P40127
Z-4035 2-3/16 85576 Z-40100 6-3/8 R40150 P40175 Z-4035L 2-1/8 R40127 P40127 Z-4092L 5-3/4 R40150 P40150
85818 2-1/4 R40127 P40127 Z-40102 6-1/2 85578 P40175 Z-4036L 2-3/16 R40127 P40127
Z-4037 2-5/16 85576 85852 6-5/8 R40175 P40175 Z-4037L 2-1/4 R40127 P40127 Z-4094L 5-7/8 R40150 P40150
85819 2-3/8 R40127 P40127 Z-40106 6-3/4 85580 Z-4038L 2-5/16 R40127 P40127
Z-4039 2-7/16 R40127 P40127 85854 6-7/8 85580 P40175 Z-4039L 2-3/8 R40127 P40127 Z-4096L 6 R40150 P40150
Z-4040 2-1/2 85576 85855 7 R40175 P40175 Z-4040L 2-7/16 R40127 P40127
85820A 2-9/16 85576 Z-40112 7-1/8 R40175 P40175 Z-4041L 2-1/2 R40127 P40127 Z-4098L 6-1/8 R40150 P40150
85821 2-5/8 R40127 P40127 Z-40114 7-1/4 R40175 Z-4042L 2-9/16 R40127 P40127
Z-4043 2-11/16 85576 Z-40116 7-3/8 R40175 P40175 Z-4043L 2-5/8 R40127 P40127 Z-40100L 6-1/4 R40150 P40150
85822 2-3/4 R40127 P40127 Z-40118 7-1/2 R40175 P40175 Z-4044L 2-11/16 R40127 P40127
Z-4045 2-13/16 R40127 P40127 Z-40120 7-5/8 85580 P40175 Z-4045L 2-3/4 R40127 P40127 Z-40102L 6-3/8 R40150 P40150
Z-4046 2-7/8 85576 85861 7-3/4 R40175 P40175 Z-4046L 2-13/16 R40127 P40127
85823 2-15/16 85576 Z-40124 7-13/16 R40175 P40175 Z-4047L 2-7/8 R40127 P40127 Z-40104L 6-1/2 R40150 P40150
85824 3 R40127 P40127 Z-40125 7-7/8 R40175 P40175 Z-4048L 2-15/16 R40127 P40127
Z-4049 3-1/16 85576 Z-40126 8 85580 P40175 Z-4049L 3 R40127 P40127 Z-40106L 6-5/8 R40175 P40175
85825 3-1/8 R40127 P40127 85864 8-1/8 R40175 P40175 Z-4050L 3-1/16 R40127 P40127
Z-4051 3-3/16 85576 Z-40130 8-1/4 R40175 P40175 Z-4051L 3-1/8 R40127 P40127 Z-40108L 6-3/4 R40175 P40175
85826 3-1/4 R40127 P40127 Z-40132 8-3/8 R40175 Z-4052L 3-3/16 R40127 P40127
Z-4053 3-5/16 85576 Z-40134 8-1/2 R40175 Z-4053L 3-1/4 R40127 P40127 Z-40110L 6-7/8 R40150 P40175
85827 3-3/8 R40127 P40127 Z-40136 8-3/4 R40175 Z-4054L 3-5/16 R40127 P40127
Z-4055 3-7/16 85576 Z-40140 8-7/8 R40175 Z-4055L 3-3/8 R40127 P40127 Z-40112L 7 R40175 P40175
85828 3-1/2 R40127 P40127 Z-40142 9 R40175 Z-4056L 3-7/16 R40127 P40127
Z-4057 3-9/16 85576 Z-40144 9-1/8 R40175 Z-4057L 3-1/2 R40127 P40127 Z-40114L 7-1/8 R40175 P40175
85829 3-5/8 R40127 P40127 Z-40146 9-1/4 R40175 Z-4058L 3-9/16 R40127 P40127
Z-4059 3-11/16 85578 Z-40148 Z-4059L 3-5/8 R40127 P40127 Z-40116L 7-1/4 R40175 P40175
85830 3-3/4 R40127 P40127 Z-4060L 3-11/16 R40127 P40127
Z-4061 3-13/16 85578 Z-4061L 3-3/4 R40127 P40127 Z-40118L 7-3/8 R40175 P40175
85831 3-7/8 R40127 P40127 Z-4062L 3-13/16 R40127 P40127
Z-4063 3-15/16 85578 Z-4063L 3-7/8 R40127 P40127 Z-40120L 7-1/2 R40175 P40175
85832 4 R40127 P40127 Z-4064L 3-15/16 R40127 P40127
Z-4065 4-1/16 85578 Z-4065L 4 R40127 P40127 Z-40122L 7-5/8 R40175 P40175
85833 4-1/8 R40127 P40127 Z-4066L 4-1/16 R40127 P40127
Z-4067 4-3/16 85578 Z-4067L 3-1/8 R40127 P40127 Z-40124L 7-3/4 R40175 P40175
85834 4-1/4 R40127 P40127 Z-4068L 4-3/16 R40127 P40127
Z-4069 4-5/16 85578 Z-4069L 4-1/4 R40127 P40127 Z-40125L 7-13/16 R40175 P40175
85835 4-3/8 R40127 P40127 Z-4070L 4-5/16 R40127 P40127
Z-4071 4-7/16 85578 Z-4071L 4-3/8 R40127 P40127 Z-40126L 7-7/8 R40175 P40175
85836 4-1/2 85578 Z-4072L 4-7/16 R40127 P40127
85837 4-5/8 85578 Z-4074L 4-1/2 R40127 P40127 Z-40128L 8 R40175 P40175
85838 4-3/4 85578 Z-4076L 4-5/8 R40127 P40127
85839 4-7/8 85578 Z-4078L 4-3/4 R40127 P40127 Z-40130L 8-1/8 R40175 P40175
85840 5 85578 Z-4080L 4-7/8 R40127 P40127
85841 5-1/8 R40127 P40127 Z-4082L 5 R40127 P40127 Z-40132L 8-1/4 R40175 P40175
Z-4083 5-3/16 Z-4083L 5-1/8
5-3/16 Z-40134L 8-3/8 R40175 P40175

Z-40136L 8-1/2 R40175 P40175

Z-40140L 8-3/4 R40175 P40175

Z-40142L 8-7/8 R40175 P40175

Z-40144L 9 R40175 P40175

Z-40146L 9-1/8 R40175 P40175

Z-40148L 9-1/4 R40175 P40175

2-1/2" Drive PURCHASE ONLY

Universal

3-1/2"
SQUARE DRIVE
Available Upon

Request

www.SuperiorToolRental.com 877-446-4352 23

24

IMPACT ATTACHMENTS PURCHASE or RENT Impact Extensions
Impact Universal Joint
Impact Adapters

Drive Part # Ret. Ring Drive Part # Description Ret. Ring Drive Part # Length Ret. Ring
3/4" 6800 6581 3/4"
6900 3/4" F x 1/2" M 6580 6907 7" 6581
3/4" 1" 6910 10" 6581
3/4" F x 1" M 6581 1-1/2" 6913 13" 6581
6901 #5 69E24 24" 6581
1" 8800 6581A 1" F x 3/4" M 6583 69E36 36" 6581
8900 8907 7" 6581A
1" 1" F x 1-1/2" M 6584 8910 10" 6581A
8913 13" 6581A
1-1/2" 84800 84575 8902 1-1/2" F x 1" M 84575 89E24 24" 6581A
84908 8" 84575
84900 1-1/2" F x 2-1/2" M 84575 84912 12" 84575
1-1/2" 84915 15" 84575
2-1/2" U4040 R40127 2-1/2" F x 1-1/2" M R40127 E9508 8"
84901 E9515 15" -
#5 Spline 5800 - 2-1/2" F x 3-1/2" M R40127 E9518 18" -
A4024 -
2-1/2" #5 F x 1" M –

A4056

#5 5901

www.SuperiorToolRental.com 877-446-4352 25

26

Chipping Hammers & Rivet Busters

®
Along with accessories and replacement parts for all of our hand-held demo tools,
we offer Points, Chisels, Upper & Lower Sleeves, Bumpers,Springs and much
more. Our inventory is extensive...

READY FOR SHIPMENT

www.SuperiorToolRental.com 877-446-4352 27

CHIPPING HAMMERS & ACCESSORIES CH-M4BLT CH-4R
CH-K2LR

Mini-Chippers are ideal for brick or mortar The mini 4-bolt chipping hammer is the The most resilient rental chipping hammer by
tear-out in hard to reach areas and overhead hardest hitting tool of it’s size. For those far. The 4-bolt design is nearly indestructible
applications. Also used in tear-out of small jobs that require a hard hitting tool. and designed for any industrial tear-out
refractory water wall casing. • .680 round shank oval collar application.
• .680 round shank oval collar • .680 round shank oval collar

Blows Per Minute 3600 Blows Per Minute 2750 Blows Per Minute 1700
Piston Stroke 1-3/4" Piston Stroke 2.6" Piston Stroke 4-1/4"
Bore 7/8" Bore 1.1" Bore 1-1/8"
Weight 8 lbs. Weight 10.5 lbs. Weight 20 lbs.
Length 11-3/4" Length 14-1/2" Length 15-1/2"
Avg. Air Cons. 18 cfm Avg. Air Cons. 20 cfm Avg. Air Cons. 30 cfm

CHIPPING HAMMER & ACCESSORIES

1190 Series Solid Type Lock Spring
Chisel Retainer 1194-2

1190-CPT1 (Gooseneck)
1190-SUL1 (4-Bolt)

.680 round shank oval collar.

Oval Collar 3/4" Flat Chisel Blade Style Bushing Tool
Retainer Type Moil Point

9" Round Round Round
12"
18" 303 313ST 50100
24" 303-12 315 -
36" 303-18 315-18 -
48" 303-24 315-24 -
60" 303-36 315-36 -
72" 303-48 315-48 -
84" 303-60 315-60 -
96" 303-72 315-72 -
120" 303-84 315-84 -
144" 303-96 315-96 -
192" 303-120 315-120 -
216" 303-144 315-144 -
303-192 315-192 -
303-216 315-216 -

5Dixon Fittings H.D. 500 PSI Swivel End

(for minimal field repairs)

Refer to page 116
for Hoses and Fittings

Double Banded

28

RIVET BUSTERS & ACCESSORIES

RB-4181-4 ALL PARTS INTERCHANGEABLE EXCLUDING PISTON BARREL

RB-4181-6

Rivet Buster (jumbo series) with a smaller 4" stroke. For any overhead Rivet Buster (jumbo series) with a 6" stroke for those medium duty
refractory or brick demolition work. A small tool that packs a lot of punch. demolition jobs.

Blows Per Minute 1350 Weight 23 lbs. Blows Per Minute 1200 Weight 25 lbs.
Piston Stroke 4" Length 18-1/4" Piston Stroke 6" Length 20-1/4"
Bore 1-3/16" Avg. Air Cons. 40 cfm Bore 1-3/16" Avg. Air Cons. 40 cfm

RB-4181-11 RB-4181-14

Rivet Buster (jumbo series). The original 11" stroke Rivet Buster (jumbo series). For the heaviest of
tool for Blast Furnace and Stove demolition work. Blast Furnace & Stove tearout and repair work.
This 14" stroke tool is the largest Rivet Buster made in the World today.

Blows Per Minute 720 Weight 34 lbs. Blows Per Minute 700 Weight 39 lbs.
Piston Stroke 11" Length 25" Piston Stroke 14" Length 30"
Bore 1-3/16" Avg. Air Cons. 52 cfm Bore 1-3/16" Avg. Air Cons. 52 cfm

RB-1133 RB-4181-11T

Superior’s own #1133 “D” handle, inside-trigger Rivet Buster (jumbo series). Rivet Buster “T” handle (jumbo series). Our same
For use in refractory tear-out, furnace relining and masonry demolition. 11" stroke model, ideal for any trenching application.

Blows Per Minute 850 Weight 34 lbs. Blows Per Minute 720 Weight 42 lbs.
Piston Stroke 11" Length 25" Piston Stroke 11" Length 36"
Bore 1-3/16" Avg. Air Cons. 52 cfm Bore 1-3/16" Avg. Air Cons. 52 cfm

RIVET BUSTER ACCESSORIES

ALL ACCESSORIES FOR PURCHASE ONLY

Retainer Parts 2000 Series Replacment Retainer Parts Type Part No.

Chisel, Sleeves and Bumper Assembly Retainer for RB-4181 2190 -2.557
Retainer for RB-1133 1851-1133
Rubber Bumper Retainer Lock Rubber Lower Upper Lock Spring 2194
Lower Sleeve Upper Sleeve 2101
Upper Sleeve Spring Bumper Sleeve Sleeve Lower Sleeve 2103
Rubber Bumper 2104

Standard Chisel Moil Point Back Out Punch & Long Clearance Back Out Punch Rivet Buster Handle

for cutting loose rivets for concrete demolition for backing out tight rivits for long clearance punches

Length 2000 Series Length 2000 Series Back Length 2000 Series Back Length 2000 Series
Jumbo Extra Jumbo Extra
Heavy-Duty Heavy-Duty Out Jumbo Extra Out Jumbo Extra

Punch Heavy-Duty Punch Heavy-Duty

9" 2005 9" 2011 1/2" 9" 2019 9" 2020
12" 2005-12 12" 2011-12 5/8" 9" 2007
18" 2005-18 18" 2011-18 3/4" 9" 2024-4LC 1" 9" 2028-4LC
24" 2005-24 24" 2011-24 7/8" 11" 2024-6LC 11" 2028-6LC
36" 2005-36 36" 2011-36 13" 2024-8LC
48" 2005-48 48" 2011-48 9" 2008BP 13" 2028-8LC
60" 2005-60 60" 2011-60 9" 2025-4LC
72" 2005-72 72" 2011-72 11" 2025-6LC 9" 2021BP
96" 2005-96 96" 2011-96 13" 2025-8LC
120" 2005-120 120" 2011-120 9" 2009 1-1/8" 9" 2029-4LC Placement
144" 2005-144 144" 2011-144 9" 2026-4LC 11" 2029-6LC 360° rotation
168" 2005-168 168" 2011-168 11" 2026-6LC along any part
192" 2005-192 192" 2011-192 13" 2026-8LC 13" 2029-8LC of the barrel.
216" 2005-216 216" 2011-216 Handle designed to fit
all of our Rivet Busters.

www.SuperiorToolRental.com 877-446-4352 29

CHIPPING HAMMER, RIVET BUSTER, ROCK DRILL & PAVEMENT BREAKER STEEL
144"

Chipping Hammer Length 9" – 216"
Rivet Busters Length 10" – 216"
Pavement Breakers Length 14" – 240"
Rock Drills Length 24" – 144"

72"

30

PAVEMENT BREAKERS, CLAY DIGGERS & ROCK DRILLS

Pavement Breakers Roto-Hammers / Rock Drills
CP-9A
PB-30 PB-60 PB-90 ST-115

RD-30-78 RD-60-1

Model No. PB-30 PB-60 PB-90 Model No. CP-9A ST-115 RD-30-78 RD-60-1

Blows Per Minute 1550 1400 1200 Shank Size CP Round 7/8" x 3-1/4" 7/8" x 3-1/4" 1" x 4-1/4"
Piston Stroke 3-3/8" 5" 6-1/2" Weight 8 lbs. 15 lbs. 30 lbs. 60 lbs.
Shank Size 1" x 4-1/4" 1-1/4 x 6" Length 14-3/4" 18-3/4" 18-1/2" 24"
Weight 33 lbs. 1-1/4 x 6" 91 lbs. Avg. Air Cons. 20 cfm 35 cfm 50 cfm 60 cfm
Length 22-1/2" 66 lbs. 28-3/4"
Rec’d Hose Size 1/2" 25-3/8" 3/4"
Avg. Air Cons. 39 cfm 3/4" 75 cfm
58 cfm

Clay Diggers CDT-78
CD-78

30 lb. Clay Digger is ideal for any vertical or
trenching applications. The “T” handle provides
the operator more leverage for demo applications.

Model No. CD-78 CDT-78

Shank Size 7/8" x 3-1/4" 7/8" x 3-1/4"
Weight 30 lbs. 30 lbs.
Length 22-1/2" 23-1/2"
Avg. Air Cons. 47 cfm 47 cfm

www.SuperiorToolRental.com 877-446-4352 31

PAVEMENT BREAKER, CLAY DIGGER & ACCESSORIES 3" Chisel
Narrow Chisel & Moil Point - Standard

Length Chisel No. Moil Point Shank Size Length Under Collar Part No.
Shank Size Under Collar 7/8" x 3-1/4"
923NC 1011 1" x 4-1/4" 14" 934
14" 924 1012 1-1/4" x 6" 18" 935WC
18" 924-2 1012-2 24" 935-2
24" 924-3 1012-3 36" 935-3
36" 924-4 1012-4 14" 936
48" 924-5 1012-5 18" 937
60" 924-6 1012-6 24" 937-2
72" 924-8 1012-8 36" 937-3
96" 924-10 1012-10 14" 1042W
120" 924-12 1012-12 18" 1043
144" 924-14 1012-14 24" 1043-2
168" 924-16 1012-16 36" 1043-3
192" 924-18 1012-18
7/8" x 3-1/4" 216" 924-20 1012-20 Bushing Tool - 16 Teeth - 2" x 2" Face
1" x 4-1/4" 240" 925 1013
1-1/4" x 6" 14" 926 1014 Shank Size Length Under Collar Part No.
18" 926-2 1014-2 7/8" x 3-1/4" 9" 846
24" 926-3 1014-3 1" x 4-1/4" 847
36" 926-4 1014-4 1-1/4" x 6" 849
48" 926-5 1014-5
60" 926-6 1014-6 Clay Spade - 5-1/2" Width x 8-1/2" Blade Length
72" 926-8 1014-8
96" 926-10 1014-10 Shank Size Length Under Collar Part No.
120" 926-12 1014-12 7/8" x 3-1/4" 16-1/2" 982
144" 926-14 1014-14 972
168" 926-16 1014-16 1" x 4-1/4" 1077
192" 926-18 1014-18 1-1/4" x 6"
216" 926-20 1014-20
240" 1034 1023 Asphalt Cutter - 5" Width x 6" Blade Length
14" 1035 1024
18" 1035-2 1024-2 Shank Size Length Under Collar Part No.
24" 1035-3 1024-3 7/8" x 3-1/4" 11" 942
36" 1035-4 1024-4 12" 943
48" 1035-5 1024-5 1" x 4-1/4" 12" 1046
60" 1035-6 1024-6 1-1/4" x 6"
72" 1035-7 1024-7
84" 1035-8 1024-8
96" 1035-10 1024-10
120" 1035-12 1024-12
144" 1035-14 1024-14
168" 1035-16 1024-16
192" 1035-18 1024-18
216" 1035-20 1024-20
240"

ACCESSORIES ON NEXT PAGE

32

ROCK DRILL STEEL Rock Drill Steels
Carbide Tipped Drills (Whirley Bits)

7/8" x 3-1/4" Hex Shank 1" x 4-1/4" Hex Shank

Length Length Length 7/8" hex x 3-1/4" 1" hex x 4-1/4"
Under Steel Shank Size Steel Shank Size
Part Under Drill Part Under Drill Collar
No. No. “H” Thread “H” Thread
Collar Size Depth Collar Size Depth 1 ft. Part No. Part No.
1-1/2 ft.
546 9" 6" 550-12SPL 12" 9" 2 ft. 731-H 141-H
2-1/2 ft. 73112-H 14112-H
546-12 12" 5/8" 9" 550-18SPL 18" 3/4" 15" 3 ft. 732-H 142-H
550-24SPL 24" 21" 4 ft. 73212-H 14212-H
546-18 18" 15" 5 ft. 733-H 143-H
6 ft. 734-H 144-H
546-24 24" 21" 550-30SPL 30" 27" 8 ft. 735-H 145-H
10 ft. 736-H 146-H
550 9" 6" 551-12SPL 12" 9" 12 ft. 738-H 148-H
7310-H 1410-H
550-12 12" 9" 551-18SPL 18" 7/8" 15" 7312-H 1412-H
551-24SPL 24" 21"
550-18 18" 3/4" 15"

550-24 24" 21" 551-30SPL 30" 27"

550-30 30" 27" 552-12SPL 12" 9"

551 9" 6" 552-18SPL 18" 1" 15"

551-12 12" 9" 552-24SPL 24" 21"

551-18 18" 7/8" 15" 552-30SPL 30" 27"

551-24 24" 21" 553-12SPL 12" 9" Drill Steel Extensions

551-30 30" 27" 553-18SPL 18" 1-1/8" 15"

552 9" 6" 553-24SPL 24" 21"

552-12 12" 9" 553-30SPL 30" 27"

552-18 18" 1" 15" 554-12SPL 12" 9" Model TH-30
“H” Threaded Coupling
552-24 24" 21" 554-18SPL 18" 15"
554-24SPL 24" 1-1/4" 21" Overall Length Thread
552-30 30" 27" Part No.
24" H
553-12 12" 9" 554-30SPL 30" 27" 522-2EXT 36" H
522-3EXT 48" H
553-18 18" 15" 555-12SPL 12" 9" 522-4EXT 60" H
553-24 1-1/8" 522-5EXT 72" H
555-18SPL 18" 1-3/8" 15" 522-6EXT 96" H
24" 21" 522-8EXT

553-30 30" 27" 555-24SPL 24" 21"

554-12 12" 9" 555-30SPL 30" 27"

554-18 18" 15" 556-12SPL 12" 9"
554-24 24" 1-1/4" 21"
556-18SPL 18" 1-1/2" 15" Threaded Rock Bits
554-30 30" 27" 556-24SPL 24" 21"

555-12 12" 9" 556-30SPL 30" 27" Carbide
Insert
555-18 18" 15" All Steel
555-24 1-3/8"

24" 21"

555-30 30" 27" Steel Bit Carbide Bit Carbide Bit
“H” Thread Single-Use Multi-Use*
556-12 12" 9" Bit Size “H” Thread “H” Thread
Diameter Part No.
556-18 18" 15" Part No. Part No.
556-24 1-1/2"
1-3/8" LH35SH HSC138 T1207M0
24" 21" 1-1/2" LH38SH HSC112 T1507M0
1-5/8" LH41SH HSC158 T1607M0
556-30 30" 27" 1-3/4" LH44SH HSC134 T1707M0
1-7/8" LH47SH T1907M0
2" LH50SH HSC200 T2007M0
2-1/4" LH57SH T2207M0
2-1/2" LH63SH T2507M0
2-5/8" LH66SH
2-3/4" HC234
3" T3007M0

*Multi-use carbide bits are designed for multiple
resharpening
In stock

www.SuperiorToolRental.com 877-446-4352 33

34

Bolting - Hydraulic

Superior Tool Rental & Repair provides
a complete bolting experience, both in house and on-site.
Our mobile bolting service can make your job-site as efficient as
possible. From on-site bolting, setup and assistance to testing, repair, calibration and certification – Superior Tool
Rental & Repair has you covered.
We are able to test, repair, calibrate and certify all of the following:
• Manual Torque Wrenches
• Hydraulic Torque Wrenches, Square Drives and Cassette Style with testing capabilities up to 35,000 ft. lbs.
• Pneumatic Torque Controlled Impact Guns
• Gauge calibration and certification
We can give advice on the best solution and most effective tools for your application.
For more information or to schedule a job-site visit, training and/or tool demonstration, please call your sales or rental representative.

www.SuperiorToolRental.com 877-446-4352 35

BOLTING - HYDRAULIC

S1500X-3/4" PRESSURE/TORQUE CONVERSION

3/4" square drive hydraulic ALL HYDRAULIC TORQUE
torque wrench, delivering up WRENCH PUMPS SET TO
to 1,952 ft. lbs. of torque. 10,000 PSI UPON RENTAL
DELIVERY, DIAL DOWN
Typical Socket Range 3/4" – 2" ACCORDINGLY
Optional Allen
Key Range 1/2" – 1"
Weight
7 lbs.
Torque Range Min. Max.
144 1,952
NOTE: Always set pressure with tool & or pump RUNNING
and away from job!

S3000-1" Pump S1500X S3000 S11000 S25000 RT-50
Pres.
1" square drive hydraulic (PSI) Torque Torque Torque Torque Torque
torque wrench, delivering up (Ft/Lbs) (Ft/Lbs) (Ft/Lbs) (Ft/Lbs) (Ft/Lbs)
to 3,200 ft. lbs. of torque.

Typical Socket Range 7/8" – 3-7/8" 1,000 195 320 1,100 2,515 –
Optional Allen 1,200 235 384 1,320 3,018 –
Key Range 5/8" – 1-1/4" 1,400 274 448 1,540 3,521 –
Weight 1,600 311 512 1,760 4,024 8,400
12.3 lbs. 1,800 351 576 1,980 4,527 9,450
Torque Range Min. Max. 2,000 390 640 2,200 5,030 10,500
323 3,200 2,200 430 704 2,420 5,533 11,550
2,400 470 768 2,640 6,036 12,600
S11000-1-1/2" 2,600 506 832 2,860 6,539 13,650
2,800 546 896 3,080 7,042 14,700
1-1/2" square drive hydraulic 3,000 586 960 3,300 7,545 15,750
torque wrench, delivering up 3,200 625 1,024 3,520 8,048 16,800
to 11,000 ft. lbs. of torque. 3,400 662 1,088 3,740 8,551 17,850
3,600 702 1,152 3,960 9,054 18,900
Typical Socket Range 1-5/8" – 6-1/4" 3,800 741 1,216 4,180 9,557 19,950
4,000 781 1,280 4,400 10,060 21,000
Optional Allen 1-1/4" – 1-3/4" 4,200 821 1,344 4,620 10,563 22,050
Key Range 4,400 857 1,408 4,840 11,066 23,100
4,600 897 1,472 5,060 11,569 24,150
Weight 34.67 lbs 4,800 937 1,536 5,280 12,072 25,200
5,000 976 1,600 5,500 12,575 26,250
Torque Range Min. Max. 5,200 1,016 1,664 5,720 13,078 27,300
5,400 1,053 1,728 5,940 13,581 28,350
1,100 11,000 5,600 1,092 1,792 6,160 14,084 29,400
5,800 1,132 1,856 6,380 14,587 30,450
S25000-2-1/2" 6,000 1,171 1,920 6,600 15,090 31,500
6,200 1,211 1,984 6,820 15,593 32,550
2-1/2" square drive hydraulic 6,400 1,248 2,048 7,040 16,096 33,600
torque wrench, delivering up 6,600 1,287 2,112 7,260 16,599 34,650
to 25,150 ft. lbs. of torque. 6,800 1,327 2,176 7,480 17,102 35,700
7,000 1,367 2,240 7,700 17,605 36,750
Typical Socket Range 2-3/8" – 10" 7,200 1,406 2,304 7,920 18,108 37,800
7,400 1,443 2,368 8,140 18,611 38,850
Optional Allen 1-1/2" – 2-1/4" 7,600 1,483 2,432 8,360 19,114 39,900
Key Range 7,800 1,522 2,496 8,580 19,617 40,950
8,000 1,562 2,560 8,800 20,120 42,000
Weight 70.8 lbs. 8,200 1,602 2,624 9,020 20,623 43,050
8,400 1,638 2,688 9,240 21,126 44,100
Torque Range Min. Max. 8,600 1,678 2,752 9,460 21,629 45,150
8,800 1,718 2,816 9,680 22,132 46,200
2,515 25,150 9,000 1,757 2,880 9,900 22,635 47,250
9,200 1,794 2,944 10,120 23,138 48,300
RT-50 Series Torque Wrench 2-1/2" 9,400 1,834 3,008 10,340 23,641 49,350
9,600 1,873 3,072 10,560 24,144 50,400
2-1/2" square drive hydraulic 9,800 1,913 3,136 10,780 24,647 51,450
torque wrench, delivering up 10,000 1,952 3,200 11,000 25,150 52,500
to 52,500 ft. lbs. of torque.

Typical Socket Range 2-3/8" – 10"

Weight 96 lbs.

Torque Range Min. Max.

7,875 52,500

36

BOLTING - HYDRAULIC Portable Electric Torque Wrench Pump
SRS-Series, Extended Reaction Arms

ENTERPAC

• Lightweight
interchangeable design

Wrench Max. Dimensions (in) Wt.
Model Torque (lbs.)*
Model No. ABC D E
1328 SRS151 1.34 1.8
SRS152 3.81 3.43 5.04 0.94 1.34 2.2
S1500X 1210 SRS153 ENTERPAC 1.34 2.6
SRS301 1.89 3.5
1131 SRS302 4.80 3.86 5.47 0.94 1.89 4.4
SRS303 1.89 4.4
2890 SRS1101 5.47 4.29 5.90 0.94 2.99 9.7
SRS1102 2.99 11.2
S3000 2738 SRS1103 4.37 4.09 6.69 1.34 2.99 12.8 For Use Maximum Pressure Oil Flow Rate Usable Electric Weight
SRS2501 3.94 16.8 Motor (lbs)
2636 SRS2502 5.39 4.69 7.28 1.34 3.94 18.1 with Rating (psi) (in3/min) Oil 53
SRS2503 3.94 22.0 115V-
10805 6.38 5.24 7.87 1.34 Torque 1st 2nd 1st 2nd Capacity 1 ph
Wrenches Stage Stage Stage Stage (gal) -50/60Hz
S11000 10294 5.94 6.22 2.33 1.81
S3000X
9874 6.93 6.81 9.17 1.81 W2000X 700 10,000 200 20 .50
W4000X
24736 7.91 7.36 10.31 1.81

S25000 23638 7.20 8.86 12.36 1.97

22680 8.19 9.45 12.95 1.97 ZU4T Electric Torque Wrench Pumps

9.17 10.00 13.54 1.97

* Weights indicated are for the accessories only and do not include the wrench.

ENTERPAC

RTE- Series, Reaction Tube Extensions

• Full torque rated ENTERPAC 2 port manifold
• Increases tool fit in 4 port manifold

restricted access areas

Torque Wrench Dimensions (in) Wt.
Model Number
Model No. A B C D E (lbs.)*
S1500X
RTE15 27.80 5.98 25.04 2.28 23.62 10.1

S3000 RTE30 28.86 5.98 25.47 2.24 23.62 12.1

S11000 RTE110 30.28 5.98 26.57 2.99 23.62 24.7

S25000 RTE250 32.01 5.98 26.97 3.94 23.62 38.1

RT-50 – ––- – ––

* Weights indicated are for the accessories only and do not include the wrench.

Torque Wrench Dimensions (in)

2 port manifold w/cage

For Use with Torque Wrenches All Wrenches

Model A B C D E F G H Weight (lb) Motor Electrical Spec. 115 V-1 ph
Usable Oil Capacity 1.0 gal
S1500X- 3/4" 1.55 2.54 4.24 3.74 5.35 0.99 2.72 4.69 5.95 Weight with Oil 100 73 lb
Motor Size 700 1.7 hp
S3000-1" 1.91 3.14 5.28 4.96 6.77 1.30 3.54 6.26 11.02 5,000 700
Output Flow Rate 10,000 535
S11000-1-1/2" 2.81 4.48 7.71 7.35 8.98 1.95 5.22 8.98 33.07 (in3/min) (psi) 76
60
S25000-2-1/2" 3.48 5.63 9.62 9.50 11.31 2.52 7.16 11.46 68.34
1,800-10,000 psi
RT-50-2-1/2" 6.5 8.9 14 11.4 23.9 30.8 15.2 20.375 135 Relief Valve Adjustment Range

www.SuperiorToolRental.com 877-446-4352 37

BOLTING - HYDRAULIC

W2000 W4000

W2000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS W4000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS
Maximum Torque at 10,000 psi:
Maximum Torque at 10,000 psi:
2,000 Ft. lbs
4,000 Ft. lbs
Hexagon Range:
Hexagon Range:
11/8 – 23/8 inch
15/16 – 33/8 inch
Maximum Operating Pressure:
Drive Unit Model No. W4000 Maximum Operating Pressure:
Drive Unit Model No.W2000 10,000 psi
10,000 psi

Hex. Model Hex. Part Hex. Part Hex. Part Hex. Model Hex. Part Hex. Part Hex. Part
Size No. Reducer No. Reducer No. Reducer No. Size No. Reducer No. Reducer No. Reducer No.
(in) (in) (in) (in)
(in) (in) (in) (in)

11/8 W2102 – – –– – – 15/16 W4105 – – –– – –

13/16 W2103 – – –– – – 13/8 W4106 – – –– – –

11/4 W2104 – – –– – – 17/16 W4107 – – –– – –

15/16 W2105 – – –– – – 11/2 W4108 – – –– – –

13/8 W2106 – – –– – – 19/16 W4109 – – –– – –

17/16 W2107 17/16 - 11/8 W2107R102 – – – – 15/8 W4110 – – –– – –

11/2 W2108 – – –– – – 111/16 W4111 – – –– – –

19/16 W2109 – – –– – – 13/4 W4112 – – –– – –

15/8 W2110 15/8 - 11/4 W2110R104 15/8 - 13/16 W2110R103 – – 113/16 W4113 – – –– – –

111/16 W2111 – – –– – – 17/8 W4114 – – –– – –

13/4 W2112 – – –– – – 115/16 W4115 – – –– – –

113/16 W2113 113/16 - 17/16 W2113R107 113/16 - 11/4 W2113R104 – – 2 W4200 2 - 17/8 W4200R107 – – – –

17/8 W2114 – – –– – – 21/16 W4201 – – –– – –

115/16 W2115 – – –– – – 21/8 W4202 – – –– – –

2 W2200 2 - 15/8 W2200R110 2 - 17/16 W2200R107 – – 23/16 W4203 23/16 - 15/8 W4203R110 23/16 -17/16 W4203R107 23/16 -11/4 W4203R104

21/16 W2201 – – –– – – 21/4 W4204 – – –– – –

21/8 W2202 – – –– – – 25/16 W4205 – – –– – –

2 3/16 W2203 23/16 - 113/16 W2203R113 23/16 - 15/8 W2203R110 23/16 - 17/16 W2203R107 23/8 W4206 23/8 - 2 W4206R200 23/8 -113/16 W4206R113 23/8 -17/16 W4206R107

21/4 W2204 – – –– – – – – 23/8 - 13/8 W4206R106 – – – –

25/16 W2205 – – –– – – 27/16 W4207 27/16 - 2 W4207R200 – – – –

23/8 W2206 23/8 - 2 W2206R200 23/8 - 17/8 W2206R114 23/8 - 113/16 W2206R113 21/2 W4208 21/2 - 2 W4208R200 21/2 -113/16 W4208R113 21/2 - 21/16 W4208R201

– – 23/8 - 11/2 W2206R108 23/8 - 17/16 W2206R107 23/8 - 15/8 W2206R110 29/16 W4209 29/16 - 23/16 W4209R203 29/16 -21/8 W4209R202 – –

– – 29/16 - 2 W4209R200 29/16 -113/16 W4209R113 – –

360° Swivel Rotation & 160° Tilt 25/8 W4210 – – –– – –

211/16 W4211 – – –– – –

23/4 W4212 23/4 - 23/8 W4212R206 23/4 -13/16 W4212R203 23/4 - 21/8 W4212R202

213/16 W4213 – – –– – –

27/8 W4214 – – –– – –

215/16 W4215 215/16 -29/16 W4215R209 215/4 -23/8 W4215R206 215/16 -23/16 W4215R203

– – 215/16 - 2 W4215R200 – – – –

3 W4300 3 - 23/16 W4300R203 – – – –

31/16 W4301 – – –– – –

31/8 W4302 31/8 - 215/16 W4302R215 31/8 -23/4 W4302R212 31/8 - 29/16 W4302R209

– – 31/8 - 23/8 W4302R206 31/8 -25/16 W4302R205 31/8 - 21/4 W4302R204

– – 31/8 - 23/16 W4302R203 31/8 -21/8 W4302R202 31/8 - 2 W4302R200

33/16 W4303 – – –– – –

31/4 W4304 – – –– – –

35/16 W4305 – – –– – –

33/8 W4306 – – –– – –

38

BOLTING - HYDRAULIC

W8000 W15000

W8000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS W15000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS

Maximum Torque at 10,000 psi: Maximum Torque at 10,000 psi:

8,000 Ft. lbs 15,000 Ft. lbs

Hexagon Range: Hexagon Range:

17/8 – 41/8 inch 27/16 – 45/8 inch

Drive Unit Model No. W8000 Maximum Operating Pressure: Maximum Operating Pressure:

10,000 psi Drive Unit Model No. W15000 10,000 psi

Hex. Model Hex. Part Hex. Part Hex. Part Hex. Model Hex. Part Hex. Part Hex. Part
Size No. Reducer No. Reducer No. Reducer No. Size No. Reducer No. Reducer No. Reducer No.
(in) (in) (in) (in)
(in) (in) (in) (in)

17/8 W8114 – – –– – – 27/16 W15207 – – –– ––

115/16 W8115 – – –– – – 21/2 W15208 – – – – – –

2 W8200 – – – – – – 29/16 W15209 – – –– ––

21/16 W8201 – – –– – – 25/8 W15210 – – – – – –

21/8 W8202 – – –– – – 211/16 W15211 – – –– ––

23/16 W8203 – – –– – – 23/4 W15212 – – – – – –

21/4 W8204 – – –– – – 213/16 W15213 – – –– ––

25/16 W8205 – – –– – – 27/8 W15214 – – – – – –

23/8 W8206 – – –– – – 215/16 W15215 – – –– – –

27/16 W8207 – – –– – – 3 W15300 3 - 21/8 W15300R202 – – – –

21/2 W8208 – – –– – – 31/16 W15301 – – –– ––

29/16 W8209 29/16 - 2 W8209R200 – – – – 31/8 W15302 31/8 - 29/16 W15302R209 – – – –

25/8 W8210 – – –– – – 33/16 W15303 – – –– ––

211/16 W8211 – – –– – – 31/4 W15304 – – – – – –

23/4 W8212 23/4 - 23/16 W8212R203 35/16 W15305 – – –– – –

213/16 W8213 – – –– – – 33/8 W15306 – – – – – –

27/8 W8214 – – –– – – 37/16 W15307I – – –– ––

215/16 W8215 215/16 - 23/8 W8215R206 215/16 -13/16 W8215R203 31/2 W15308 31/2 -215/16 W15308R215 31/2 -23/4 W15308R212 – –

3 W8300 – – – – – – 39/16 W15309 – – –– – –

31/16 W8301 – – –– – – 35/8 W15310 – – – – – –

31/8 W8302 31/8 - 29/16 W8302R209 31/8 -23/8 W8302R206 31/8 - 23/16 W8302R203 311/16 W15311 – – –– – –

– – 31/8 - 2 W8302R200 – – – – 33/4 W15312 33/4 - 31/8 W15312R302 33/4 -215/16 W15312R215 – –

33/16 W8303 – – –– – – 313/16 W15313 – – –– – –

31/4 W8304 – – –– – – 37/8 W15314 37/8 - 31/8 W15314R302 37/8 -215/16 W15314R215 – –

35/16 W8305 – – –– – – 315/16 W15315 – – –– ––

33/8 W8306 – – –– – – 4 W15400 – – – – – –

37/16 W8307I – – –– – – 41/16 W15401I – – –– ––

31/2 W8308 31/2 - 3 W8308R300 31/2 -215/16 W8308R215 31/2 - 23/4 W8308R212 41/8 W15402 41/8 - 31/2 W15402R308 41/8 -35/16 W15402R305 41/8 - 31/4 W15402R304

39/16 W8309 – – –– – – 43/16 W15403I – – – – – –

35/8 W8310 – – –– – – 41/4 W15404 41/4 - 31/2 W15404R308 41/4 - 31/8 W15404R302 – –

311/16 W8311 – – –– – – 45/16 W15405 – – –– ––

33/4 W8312 33/4 - 31/8 W8312R302 33/4 -215/16 W8312R215 33/4 - 23/4 W8312R212 43/8 W15406 – – – – – –

313/16 W8313 – – –– – – 47/16 W15407 – – –– – –

37/8 W8314 37/8 - 31/8 W8314R302 37/8 -215/16 W8314R215 – – 41/2 W15408I – – – – – –

315/16 W8315 – – –– – – 49/16 W15409I – – –– ––

4 W8400 – – – – – – 45/8 W15410I 45/8 - 315/16 W15410R315 45/8 -37/8 W15410R314 45/8 - 23/4 W15410R312

41/16 W8401I – – –– – – – – 45/8 - 31/2 W15410R308 – – – –

41/8 W8402 – – –– – –

www.SuperiorToolRental.com 877-446-4352 39

BOLTING - HYDRAULIC

W22000 W35000

W22000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS W35000 SERIES IMPERIAL CASSETTES & REDUCER INSERTS
Maximum Torque at 10,000 psi:
Maximum Torque at 10,000 psi:
35,000 Ft. lbs
22,000 Ft. lbs
Hexagon Range:
Hexagon Range:
31/8 – 61/8 inch
215/16 – 53/8 inch
Maximum Operating Pressure:
Maximum Operating Pressure:
Drive Unit Model No.W35000 10,000 psi
Drive Unit Model No. W22000 10,000 psi

Hex. Model Hex. Part Hex. Part Hex. Part Hex. Model Hex. Part
Size No. Reducer No. Reducer No. Reducer No. Size No. Reducer No.
(in) (in) (in)
(in) (in) 31/8 W35302 (in) W35302R200
33/16 W35303 31/8 - 2 –
215/16 W22215 – – –– – – 31/4 W35304 –
35/16 W35305 – –
3 W22300 – – – – – – 33/8 W35306 – –
37/16 W35307 – –
31/16 W22301 – – –– – – 31/2 W35308 – –
39/16 W35309 – –
31/8 W22302 31/8 - 23/8 W22302R206 31/8 -23/16 W22302R203 – – 35/8 W35310 – –
311/16 W35311 –
33/16 W22303 – – –– – – 33/4 W35312 – W35308R205
313/16 W35313 31/2 - 25/16 –
31/4 W22304 – – – – – – 37/8 W35314 – –
315/16 W35315 – –
35/16 W22305 – – –– – – 4 W35400 – –
41/16 W35401 – –
33/8 W22306 – – – – – – 41/8 W35402 –
43/16 W35403 37/8 - 211/16 W35314R211
37/16 W22307 – – –– – – 41/4 W35404 315/16 - 213/16 W35315R213
45/16 W35405 –
31/2 W22308 31/2 - 23/4 W22308R212 31/2 -29/16 W22308R209 31/2 - 23/8 W22308R206 43/8 W35406 – –
47/16 W35407 – –
39/16 W22309 – – –– – – 41/2 W35408 – –
49/16 W35409 41/4 - 31/16 –
35/8 W22310 – – –– – – 45/8 W35410 – W35404R301
43/4 W35412 – –
311/16 W22311 – – –– – – 47/8 W35414 – –
5 W35500 – –
33/4 W22312 33/4 -215/16 W22312R215 – – – – 51/8 W35502 – –
53/16 W35503 5- 4 –
313/16 W22313 – – 51/4 W35504 51/8 - 41/8 W35500R400
53/8 W35506 – W35502R402
37/8 W22314 37/8 - 31/8 W22314R302 37/8 -215/16 W22314R215 37/8 - 23/4 W22314R212 51/2 W35508 – –
59/16 W35509 53/8 - 45/16 –
315/16 W22315 – – –– – – 55/8 W35510 – W35506R405
53/4 W35512 – –
4 W22400 – – – – – – 57/8 W35514 – –
6 W35600 53/4 - 43/4 –
41/16 W22401 – – –– – – 61/8 W35602 57/8 - 47/8 W35512R412
– W35514R414
41/8 W22402 – – – – – – 61/8 - 51/8 –
W3560R502
43/16 W22403 – – –– – –

41/4 W22404 41/4 - 31/2 W22404R308 41/4 - 31/8 W22404R302 41/4 -215/16 W22404R215

45/16 W22405 – – –– – –

43/8 W22406 – – – – – –

47/16 W22407 – – –– – –

41/2 W22408 – – – – – –

49/16 W22409 – – –– – –

45/8 W22410 45/8 - 37/8 W22410R314 45/8 -33/4 W22410R312 45/8 - 31/2 W22410R308

43/4 W22412 – – –– – –

47/8 W22414 – – –– – –

5 W22500 5 - 41/4 W22500R404 5 - 41/8 W22500R402 5 - 37/8 W22500R314

51/8 W22502 – – – – – –

53/16 W22503 – – –– – –

51/4 W22504 – – – – – –

53/8 W22506 53/8 - 45/8 W22506R410 53/8 - 41/4 W22506R404 53/8 - 41/8 W22506R402

– W22506 53/8 - 37/8 W22506R314 – – – –

40

BOLTING - HYDRAULIC

PRESSURE/TORQUE CONVERSION Accessores for W-Series
Torque Wrenches
ALL HYDRAULIC TORQUE
WRENCH PUMPS SET TO TPS
10,000 PSI UPON RENTAL WTE
DELIVERY, DIAL DOWN WRP
ACCORDINGLY Series

NOTE: Always set pressure with tool & or pump RUNNING 1 Hexagon Cassette
and away from job! 2 Drive Unit
3 Pro Series Swivel
Pump W2000 W4000 W8000 W15000 W22000 W35000 4 Extended Reaction Arm
Pres. 5 Reducer Insert
(PSI) 6 Reaction Paddle

TPS-Series, Pro Series Swivels

Torque Torque Torque Torque Torque Torque
(Ft/Lbs) (Ft/Lbs) (Ft/Lbs) (Ft/Lbs) (Ft/Lbs) (Ft/Lbs)

1,000 204 418 847 1,533 2,250 3,500 TSP-Series
1,200 245 501 1016 1,840 2,700 4,200
1,400 286 585 1,186 2,146 3,150 4,900 • Featuring Tilt and Swivel technology
1,600 326 668 1,335 2,453 3,600 5,600 • 360º X-axis and 160º Y-axis rotation
1,800 367 752 1,525 2,759 4,050 6,300 • Increases tool fit in restricted access areas
2,000 408 835 1,694 3,066 4,500 7,000 • Simplifies hose placement
2,200 449 919 1,863 3,373 4,950 7,700
2,400 490 1002 2,033 3,679 5,400 8,400 Torque Wrench Model No. Model No. Maximum Wt.
2,600 530 1,086 2,202 3,986 5,850 9,100 Presure (psi) (lbs)
2,800 571 1,169 2,372 4,292 6,300 9,800
3,000 612 1,253 2,541 4,599 6,750 10,500 W2000, W4000 TSP100 10,000 .44
3,200 653 1,336 2,710 4,906 7,200 11,200 .44
3,400 694 1,420 2,880 5,212 7,650 11,900 W8000, W15000, W22000, W35000 TSP200 10,000
3,600 734 1,503 3,049 5,519 8,100 12,600
3,800 775 1,587 3,219 5,825 8,550 13,300 WTE-Series, Extended Reaction Arm
4,000 816 1,670 3,388 6,132 9,000 14,000
4,200 857 1,754 3,557 6,439 9,450 14,700 WTE-Series
4,400 898 1,837 3,727 6,745 9,900 15,400
4,600 938 1,921 3,896 7,052 10,350 16,100 • Full torque rated
4,800 979 2,004 4,066 7,358 10,800 16,800 • Increases tool fit in restricted access areas
5,000 1020 2,088 4,235 7.665 11,250 17,500
5,200 1061 2,171 4,404 7,972 11,700 18,200 Torque Wrench ModelNo. Dimensions (in) Wt.*
5,400 1102 2,255 4,574 8,278 12,150 18,900
5,600 1142 2,338 4,743 8,585 12,600 19,600 Model No. A B C (lbs)
5,800 1183 2,422 4,913 8,891 13,050 20,300
6,000 1224 2,505 5,082 9,198 13,500 21,000 W2000 WTE20 2.20 15.67 2.99 5.73
6,200 1265 2,589 5,251 9,505 13,950 21,700 W4000 WTE40 2.60 17.17 2.91 10.14
6,400 1306 2,672 5,421 9,811 14,400 22,400 W8000 WTE80 3.35 17.68 2.60 16.75
6,600 1346 2,756 5,590 10,118 14,850 23,100 W150000 WTE150 4.02 19.61 2.84 26.46
6,800 1387 2,839 5,760 10,424 15,300 23,800 W350000 WTE350 5.00 16.48 5.23 39.17
7,000 1428 2,923 5,929 10,731 15,750 24,500
7,200 1469 2,006 6,098 11,038 16,200 25,200 * Weights indicated are for the accessories only and do not include the wrench
7,400 1510 2,090 6,268 11,344 16,650 25,900
7,600 1550 3,173 6,437 11,651 17,100 26,600 WRP-Series, Low Profile Reaction Paddles
7,800 1591 3,257 6,607 11,957 17,550 27,300
8,000 1632 3,340 6,776 12,264 18,000 28,000 WRP-Series
8,200 1673 3,424 6,945 12,571 18,450 28,700
8,400 1714 3,507 7,115 12,877 18,900 29,400 • Lightweight interchangeable design
8,600 1754 3,591 7,284 13,184 19,350 30.100 • Allows for offset reaction when in-line reaction
8,800 1795 3,674 7,454 13,490 19,800 30,800
9,000 1836 3,758 7,623 13,797 20,250 31,500 is not available
9,200 1877 3,841 7,792 14,104 20,700 32,200 • Full torque rated
9,400 1918 3,925 7,962 14,410 21,150 32,900
9,600 1958 3,008 8,131 14,717 21,600 33,600 Torque Wrench Model Dimensions (in) Wt.*
9,800 1999 3,092 8,301 15,023 22,050 34,300
10,000 2040 4,175 8,470 15,330 22,500 35,000 Model No. No. A B C D E (lbs)

W2000 WRP20 3.31 0.62 1.38 1.77 5.83 .88
W4000 WRP40 4.29 0.83 1.85 2.32 7.48 1.76
W8000 WRP80 5.39 1.02 2.24 2.71 8.78 4.41
W150000 WRP150 6.50 1.26 2.71 3.43 10.12 8.60
W350000 WRP350 8.84 1.65 3.57 7.15 14.44 23.35

* Weights indicated are for the accessories only and do not include the wrench

www.SuperiorToolRental.com 877-446-4352 41

BOLTING - HYDRAULIC Flange Spreader 14 Ton

Flange Spreader Set-up Flange Spreader applies 14 tons of maximum spread
force. Stepped arm design: each step can spread
Lightweight hand pump under full load and only requires .24"
with 6' or 10' hose used access gap. Can be used in tandem
with the 14 ton hydraulic with split-flow manifold.
flange spreader.

Safety block Part No. SB-1

Flange Spreader Manual ( POP-IT®) Max. Spreading Force 14 Ton
Model No. FSH-14
The POP-IT® TOOL is the most versatile flange spreading Tip Cleararance
and prying tool on the market. The POP-IT® is lightweight, Max. Spread* .24"
durable, and delivers an incredible amount of force. 2-5/8"
Extremely easy to use. Simply insert the toes & turn
the ratchet handle. Stepped Blocks FSB-1.
Use this pair of stepped blocks
Minimum Maximum Weight to increase wedge opening up to 3-1/2".
Model No. Spread Spread Capacity

P95-525 1/16" 5-1/4" 10,000 lbs. 11 lbs.

1/2" 5-1/2" 30,000 lbs. 33 lbs. Model #P95-525
PHD0535

3" 8-1/2" 20,000 lbs. 33 lbs.

Flange Spreader 10 Ton

Flange Spreader (pin type hydraulic) that applies 10 tons of
spreading capacity. Wedge style for guide and easy gasket
replacement. Adjustable jaw widths from 4.10" – 8.5"

Model No. FS109

Max Flange Thickness 2 x 3.63"
Stud Size 1.25-1.63"
Standard Wedge .13-1.13"
Cap. 10 ton

NC-Series Hydraulic Nut Cutter STANDARD NUT CUTTER SELECTION CHART

Nut Cutters, ranging from 1/2" - 2-7/8" nut size. In 5 ton to Hexagon Heavy hex Bolt Capacity Oil Weight Replacement Model
90 ton capacity. Easy and fast removal of nuts during shut- Nut Range nut & bolt
down and turnaround work. Can be used with hand or across the flats Range Capacity Chisel Model No.
electric pumps. (in) (in) (ton) (in3) (lbs) Number
• Unique angled head allows flush access
• Single-acting, spring return cylinder 1/2 - 3/4 7/8 - 1-1/4 .31-.50 5 .92 1.8 NCB-1319 NC-1319

3/4 - 15/16 1-1/4 - 1-7/16 .50-.63 10 1.22 4.4 NCB-1924 NC-1924

15/16 - 1-1/8 1-7/16 - 1-13/16 .63-.88 15 3.66 6.6 NCB-2432 NC-2432

1-1/8 - 1-9/16 1-13/16 - 2-3/8 .88-1.13 20 4.88 9.7 NCB-3241 NC-3241

1-9/16 - 2 2-3/8 - 3-1/8 1.31-1.38 35 9.46 18.0 NCB-4150 NC-4150

2 - 2-1/4 3-1/8 - 3-1/2 1.38-1.50 50 14.64 26.0 NCB-5060 NC-5060

2-3/8 - 2-7/8 3-1/2 - 4-1/4 1.50-1.88 90 30.00 75.1 NCB-6075 NC-6075

* No Cutting of stainless steel nuts or bolts, good for all grades of steel below grade 5

NS-Series Hydraulic Nut Splitter STANDARD NUT SPLITTER SELECTION CHART

Hexagon Heavy hex Bolt Capacity Oil Weight Replacement Model
Nut Range nut & bolt No.
across the flats Range Capacity Blade Model
(in)
(in) (ton) (in3) (lbs) Number

2-3/4 - 3-1/8 4-1/4 - 4-5/8 1.75-2.00 103.2 23.0 81.4 NSB-70 NS-7080

2-3/4 - 3-1/2 4-1/4 - 5-3/8 1.75-2.25 103.2 23.0 82.7 NSB-70 NS-7085

2-3/4 - 3-7/8 4-1/4 - 5-3/4 1.75-2.50 103.2 23.0 84.9 NSB-70 NS-7095

Nut range from 2-3/4" - 5-3/8" In 103.2 ton to 192.5 ton. 2-3/4 - 4-1/4 4-1/4 - 6-1/2 1.75-2.75 103.2 23.0 87.1 NSB-70 NS-70105

• Single-acting, spring return cylinder or double for fast retraction 4-1/4 - 4-5/8 6-1/2 - 7-1/8 2.75-3.00 192.5 50.0 151.6 NSB-110 NS-110115
• Hydraulic nut splitters are specially designed to suit 4-1/4 - 5-3/8 6-1/2 - 8-1/4 2.75-3.50 192.5 50.0 158.3 NSB-110 NS-110130
standard ANSI B16.5 / BS1560 flanges

• Tri-blade technology provides three cutting surfaces on a single blade * No Cutting of stainless steel nuts or bolts, good for all grades of steel below grade 5

• Preset scale allows controlled blade extension, which avoids damage to bolt threads

• Grip tape and handle included for more secure maneuverability

42

BOLTING - PNEUMATIC RTP4100-HR25 - 1" RTP8100-GIR38 - 1-1/2"
RTP1300-HR20 - 3/4"

Whatever your industry, if your operations include loosening or tightening heavy duty bolts, Atlas Copco’s slim,
lightweight RTP pneumatic nutrunner can help increase your productivity.

TECHNICAL DATA

Model RTP1300-HR20 RTP4100-HR25 RTP8100-GIR38
Bolt size 3/4" – 1-1/16" 1-3/16" – 1-3/4" 1-1/4" – 2"
Square drive 1-1/2"
Min torque at 22 psi 3/4" 1" 1600 ft lb
Max torque at 91 psi 236 ft lb 738 ft lb 6000 ft lb
Free speed r/min 1000 ft lb 3097 ft lb 10
Weight 30 lb
Length 20 10 17"
Air cons. at free speed 8.2 lb 19.2 lb 105 cfm
Recommended hose size 9.7" 1/2"
Air inlet thread 48.7 cfm 14" 1/2"
1/2" 65.5 cfm
3/8"
1/2"
3/8"

PRESSURE/TORQUE CONVERSION

NOTE: Always set pressure with tool & or pump RUNNING and away from job!

Pump Pres. (PSI) RTP1300-HR20 RTP4100-HR25 RTP8100-GIR38

Torque (Ft/Lbs.) Torque (Ft/Lbs.) Torque (Ft/Lbs.)

22 238 789 1900
25 270 885 2120
28 302 981 2350
31 334 1080 2560
33 367 1190 2770
36 399 1290 2970
39 431 1390 3170
42 464 1500 3360
45 496 1600 3550
48 529 1700 3730
51 562 1810 3920
54 594 1920 4090
57 626 2020 4270
60 659 2120 4440
62 690 2230 4610
65 721 2320 4770
68 752 2420 4940
71 782 2520 5100
74 811 2610 5260
77 841 2700 5420
80 870 2790 5580
83 900 2880 5730
86 929 2950 5890
89 959 3030 6040
91 988 3110 6200

www.SuperiorToolRental.com 877-446-4352 43

BOLTING - PNEUMATIC RAD 34GX - 1" RAD 85GX - 1-1/2"
RAD 25GX - 1"

RAD 110DX - 1-1/2" DIMENSIONS

Model A BC D

25GX 9.7" 3.1" 3.3" 9.5"

34GX 12.5" 3.4" 3.78" 10.8"

85GX 14.35" 4.5" 4.5" 10.8"

110DX 13.9" 5.0" 5.0" 11.07"

TECHNICAL DATA

Part No. 12377 12356 12383 110DX
Model RAD SINGLE SPEED
Square drive RAD 25GX RAD 34GX RAD 85GX
Min torque at 22 psi 1-1/2"
Max torque at 91 psi 1" 1" 1-1/2" 4000 ft.lb.
Free speed r/min 11000 ft.lb.
Weight 500 ft.lb. 1000 ft.lb. 3000 ft.lb.
Length 3
Noise Level 2500 ft.lb. 3400 ft.lb. 8500 ft.lb. 42.0 lb.
Rec. hose size 13.9"
Air inlet thread 9 12 4.5 85 db

13.5 lb. 20.0 lb. 38.5 lb. 1/2"
1/2"
9.7" 12.5" 14.35"

85 db 85 db 85 db

1/2" 1/2" 1/2"

3/8" 3/8" 1/2"

PRESSURE/TORQUE CONVERSION

NOTE: Always set pressure with tool & or pump RUNNING and away from job!

RAD 25GX RAD 34GX RAD 85GX RAD 110DX

Pump Pres. PSI Torque (Ft/Lbs.) Pump Pres. PSI Torque (Ft/Lbs.) Pump Pres. PSI Torque (Ft/Lbs.) Pump Pump Torque (Ft/Lbs.)
Pres. PSI Torque (Ft/Lbs.) Pres. PSI
15 500 23 1000 28 3013
18 600 26 1100 26 3205 31 4000 70 9000
21 700 28 1200 35 3672
24 800 30 1300 40 4206 32 4200 72 9200
28 900 33 1400 45 4656
31 1000 36 1500 50 5157 34 4400 75 9400
34 1100 38 1600 55 5627
37 1200 41 1700 60 6022 35 4600 77 9600
40 1300 44 1800 65 6433
44 1400 46 1900 70 6989 37 4800 79 9800
47 1500 49 2000 75 7331
50 1600 52 2100 80 7747 38 5000 81 10000
54 1700 55 2200 85 8151
57 1800 58 2300 90 8489 40 5200 83 10200
60 1900 61 2400
64 2000 64 2500 41 5400 85 10400
68 2100 67 2600
73 2200 69 2700 42 5600 87 10600
77 2300 73 2800
81 2400 76 2900 44 5800 89 10800
85 2500 80 3000
83 3100 45 6000 91 11000
87 3200
90 3300 47 6200
94 3400
48 6400

50 6600

52 6800

53 7000

55 7200

57 7400

58 7600

60 7800

62 8000

63 8200

65 8400

67 8600

69 8800

44

TORQUE TESTER

1" DRIVE TORQUE WRENCH 1-1/2" DRIVE TORQUE WRENCH 2-1/2" DRIVE TORQUE WRENCH W4000 TORQUE WRENCH

NOT FOR RENT

Hydraulic torque wrench tester. Test from 2,500 – 25,000 ft. lbs. of torque. Superior Tool can supply a
calibration certificate for the tool within a tolerance of 4% clockwise, 6% counterclockwise of accuracy.

Superior Tool can provide a certificate with all torque wrench rentals or for your company owned equipment.

W8000 TORQUE WRENCH

PURCHASE or RENT

BACK UP TOOL

PART No. SIZE PART No. SIZE

Q431460 7/8" Q431474 2-9/16"
Q431461 1-1/16" Q431479 2-15/16"
Q431462 1-1/4" Q431471
Q431463 1-7/16" Q431482 2-3/4"
Q431464 1-5/8" Q431484 3-1/8"
Q431465 1-13/16" Q431485 3-1/2"
Q431466 Q431491 3-7/8"
Q431467 2" Q431493 4-1/4"
Q431470 2-3/16" Q431494 4-5/8"
2-3/8" 5-3/8"

BACKING TOOL FASTENING PROCEDURE 6 Upon completion of tightening, The Backing Tool may be removed
1 Before beginning the fastening procedure, make sure your work by hand. If necessary, a hammer can be used against the strike
plate of the tool for removal. Use the smallest hammer necessary.
area is safe in condition and all applicable personal protective Make sure your tether is secure before removal begins.
equipment (PPE) is in satisfactory and worn.
7 The Backing Tool is designed to enhance safety and effectiveness
2 Inspect The Backing Tool, tether, and ball detente for any in the workplace. Proper care of The Backing Tool as a quality
possible defects, and insure Muskegon Tools is imprinted on this tool should be maintained.
device, which will insure the tool meets required specifications.
8 During the course of operating The Backing Tool, if more or less
3 Push The Backing Tool over the nut or bolt head intended for tension on the “ball detente” is required, remove the cap protecting
the back up device. Make sure full contact is made and the right the threads with an allen wrench and adjust the depth with a screw
angle lip on The Backing Tool is suitably contacted with the outer driver (or for the 2-3/4" and larger sizes, an allen wrench).
diameter on the flange.
The Backing Tool is designed for torqueing, tightening, and
4 Attach a suitable tether to the ring on The Backing Tool and the loosening of flange bolted connections. While a very superior tool
other end to a stationary object. As in any fastening operation, designed for enhanced safety and efficiency, The Backing Tool is not
make sure the area below is barricaded and clear. recommended for use in any abusive action that veers from
reasonable safety practices, such as intentional stud shearing usually far
5 The fastening operation is now ready. For hands free backup, exceeding torque safety factors resulting in possible damage of
keep hands free of The Backing Tool and apply necessary components involved and possible injury. Responsible use of The Backing
torque to the opposing side of the fastener. Tool allows the craftsman valuable assistance providing a safer and
more productive day.

www.SuperiorToolRental.com 877-446-4352 45

BOLTING - MANUAL
Torque Wrenches

#4478
#6448
#10005LDFN
#8447
#8448

#8449

Model No. Torque Range Manual Torque Wrenches Length (in.) Weight (lbs.)

#4478 0-250 ft. lbs. Drive (in.) Head Style No. of Ext. Handles 24 3.15
#6448 100-600 ft. lbs. 42 17
#10005LDFN 0-1000 ft. lbs. 1/2 Ratchet 0 74 30
#8447 200-1000 ft. lbs. 3/4 Ratchet 0 70 25.0
#8448 200-1000 ft. lbs. 1 Plain 1 69 24.5
#8449 300-2000 ft. lbs. 1 Ratchet 1 108-1/2 48.75
1 Plain 1
1 Plain 2

Torque Multipliers

#9S391 #9S292 #9S392B #9S393A

Output Capacity 1200 ft. lbs. Output Capacity 2.000 ft. lbs. Output Capacity 2,200 ft. lbs. Output Capacity 3,200 ft. lbs.
Input Capacity 200 ft. lbs. Input Capacity 500 ft. lbs. Input Capacity 162 ft. lbs. Input Capacity 173 ft. lbs.
Input Drive 1/2" sq. female Input Drive 3/4" sq. female Input Drive 1/2" sq. female Input Drive 1/2" sq. female
Output Drive 3/4" sq. male Output Drive 1" sq. male Output Drive 1" sq. male Output Drive 1" sq. male
Torque Ratio 6:1 Torque Ratio 3.5:1 Torque Ratio 13.6:1 Torque Ratio 18.5:1
A Length 19.6" Gear Ratio 4.267:1 Gear Ratio 15.0:1 Gear Ratio 20.25:1
B Head Dia. 3.94" A Length 19-1/2" A Length 19-5/8" A Length 19-5/8"
C Height 4" B Head Dia. 4-1/2" B Head Dia. 4-1/16" B Head Dia. 4-1/16"
Wt. lbs. 9.1 lbs. C Height 3-13/16" C Height 6-1/2" C Height 6-1/2"
Size 1200 ft. lbs. Wt. lbs. 13.91 lbs. Wt. lbs. 20.19 lbs. Wt. lbs. 18.3 lbs.
Size 2000 ft. lbs. Size 2,200 ft. lbs. Size 3,200 ft. lbs.

46

MANUAL TORQUE WRENCH TESTER
NOT FOR RENT

Certificate of Calibration

Nut / Bolt Size vs. Width Across Flats

NUT/BOLT 1/2 5/8 3/4 7/8 1 11/8 11/4 13/8 11/2 15/8 13/4 17/8 2 21/4 21/2 3 31/2
SIZE 23/16 13/8 29/16 23/4 215/16 31/8 31/2 37/8 45/8 53/8

WRENCH 7/8 11/16 11/4 17/16 15/8 113/16 2
SIZE

Torque Procedure Torque Sequence

When torquing it is common to tighten only one
bolt at a time. This can result in Point Loading and
Load Scatter. To avoid this, torque is applied in
stages following a prescribed pattern:

Step 1 Spanner tight ensuring that 2 - 3 Step 4 Increase the torque to full torque following
threads extend above nut. the pattern shown above.

Step 2 Tighten each bolt to one-third of the final Step 5 Perform one final pass on each bolt working
required torque following the pattern as clockwise from bolt 1, at the full final torque
shown above.

Step 3 Increase the torque to two-thirds following
the pattern shown above.

www.SuperiorToolRental.com 877-446-4352 47

Hydraulic Pumps & Cylinders

®

We rent the most reliable and recognized name in the lifting business today. These cylinders come in all shapes, sizes,
capacities and strokes. If your application comes with tonnage and clearances, we can outfit your lifting requirements
from a single cylinder to a COMPLETE LIFTING SYSTEM.
All in one - hydraulic electric pump with manifold system, for easy job site use. (Single or double acting cylinders)

All in one cart, electric hydraulic
pump with 4 port manifold system
with built in gage. Can be used for
either single or double acting
hydraulic cylinders. Easy mobility
for jobsite use and transportation.

48

HYDRAULIC PUMPS PU-Series, Economy Electric Pumps

P-Series, Ultima Steel Hand Pumps Standard electric and battery
Hand pumps, including the P-39 and P-80 operated pumps.

Model Usable Used Pressure Rating Output Flow Valve Weight
Number Oil with (psi) Rate (in3/min) Type
Capacity Cylinder
Model Usable Oil Pump Pressure Rating Weight (gal) 1st 2nd 1st 2nd
Number Capacity (in3) Type 1st stage 2nd stage stage stage stage stage

PUD-1301B 1.00 Single- 200 10,000 200 20 Dump 35 lbs.
& Hold
P-39 47 Single N/C 10,000 psi 13.6 lbs. .50 acting 200 10,000 3-way,
PUJ-1200B 200 20 2-pos. 24 lbs.
P-80 134 Two-Speed 500 10,000 psi 23.6 lbs.

ZU-Series, Electric Pumps ZE-Series, Electric Pumps
Mid-size hydraulic pumps for single and double acting cylinders.
Larger electric reservoir pump w/filter and gauges for
single and double acting hydraulic cylinders.

Model Used with Valve Pump Usable Weight Output Flow Used with Valve Usable Weight
Rate at
Number Cylinder Function Control Oil with Cylinder Function Oil
Capacity Oil
115 VAC3) Single Double 10,000 psi: Capacity
(gal) (lbs) 60 in3/min
1 Phase acting acting Advance Hold Retract Model No. Single Double Advance Hold Retract (gal) (lbs)
acting acting
ZU4308PB • - • • • Remote (Man.) 2.0 71

ZU4408PB - • • • • Remote (Man.) 2.0 71 ZE4310SB • - • •• 2.5 134
ZU4420PB - • • • • Remote (Man.) 5.0 110 ZE4320SB • - • •• 5.0 161

www.SuperiorToolRental.com 877-446-4352 49

HYDRAULIC CYLINDERS CLL-Series Single-Acting, Lock Nut Cylinders
RC-Series Duo Cylinders, Single-Acting

Cylinder Stroke Collap. Ext. Outside Weight Model
Capacity Height Height Diam. No.
(ton) (in)
1.00 A BD RC-251 Cylinder Stroke Collap. Ext. Outside Lock Weight Model
25 2.00 (in) (in) (in) (lbs) RC-252 Height Diam. Nut No.
4.00 RC-254 Capacity Height Height
(25.8) 6.25 5.50 RC-256 B D CLL-502
8.25 6.50 6.50 3.38 13 RC-258 (ton) (in) (in) (in) lbs. CLL-504
50 10.25 8.50 RC-2510 (in) (in) CLL-506
(55.2) 12.25 10.75 8.50 3.38 14 RC-2512 50 1.97 6.46 1.42 35 CLL-508
100 14.25 12.75 12.50 3.38 18 RC-2514 3.94 8.43 8.43 4.92 1.42 46 CLL-5010
(103.1) 2.00 14.75 RC-502 100 5.91 10.39 12.36 4.92 1.42 57 CLL-5012
4.00 16.75 17.00 3.38 22 RC-504 7.87 12.36 16.30 4.92 1.42 68 CLL-1002
6.25 18.75 21.00 3.38 27 RC-506 150 9.84 14.33 20.24 4.92 1.42 79 CLL-1004
13.25 6.94 RC-5013 11.81 16.30 24.17 4.92 1.42 90 CLL-1006
6.63 8.94 25.00 3.38 31 RC-1006 200 1.97 7.36 28.11 4.92 1.73 68 CLL-1008
10.25 11.13 29.00 3.38 36 RC-10010 250 3.94 9.33 9.33 6.50 1.73 87 CLL-10010
18.13 300 5.91 11.30 13.27 6.50 1.73 106 CLL-10012
14.06 33.00 3.38 39 400 7.87 13.27 17.20 6.50 1.73 125 CLL-1502
17.69 500 9.84 15.24 21.14 6.50 1.73 143 CLL-1504
8.94 5.00 33 600 11.81 17.20 25.08 6.50 1.73 162 CLL-1506
800 1.97 8.23 29.02 6.50 1.73 117 CLL-1508
12.94 5.00 42 1000 3.94 10.20 10.20 8.07 1.73 146 CLL-15010
5.91 12.17 14.13 8.07 1.73 174 CLL-15012
17.38 5.00 51 7.87 14.13 18.07 8.07 1.73 203 CLL-2002
31.38 5.00 83 9.84 16.10 22.01 8.07 1.73 231 CLL-2006
11.81 18.07 25.94 8.07 1.73 260 CLL-20012
20.69 7.00 130 1.97 9.57 29.88 8.07 1.97 183 CLL-2502
27.94 7.00 160 5.91 13.50 11.54 9.25 1.97 260 CLL-2506
11.81 19.41 19.41 9.25 1.97 376 CLL-25012
RSM/RCS-Series, Low Height Cylinders 1.97 9.80 31.22 9.25 2.20 256 CLL-3002
5.91 13.74 11.17 10.83 2.20 359 CLL-3006
RCS-Series RSM-Series 11.81 19.65 19.65 10.83 2.20 515 CLL-30012
1.97 11.61 31.46 10.83 2.36 382 CLL-4002
Cylinder Stroke Collap. Ext. Outside Weight Model 5.91 15.55 13.58 12.20 2.36 514 CLL-4006
Capacity Height Height Diam. No. 11.81 21.46 21.46 12.20 2.36 712 CLL-40012
A 1.97 13.19 33.27 12.20 2.76 553 CLL-5002
(ton) B D (lbs) 5.91 17.13 15.16 13.78 2.76 721 CLL-5006
(maxi) (in) (in) (in) 11.81 23.03 23.03 13.78 2.76 972 CLL-50012
(in) 1.97 14.76 34.84 13.78 3.15 809 CLL-6002
20 (22.4) .44 2.03 2.47 5.91 18.70 16.73 15.75 3.15 1029 CLL-6006
30 (32.4) .50 2.31 2.81 4.00 x 3.00 6.8 RSM-200 11.81 24.61 24.61 15.75 3.15 1360 CLL-60012
50 (48.1) .63 2.63 3.25 4.63 x 3.75 10 RSM-300 1.97 15.55 36.42 15.75 3.35 985 CLL-8002
75 (79.5) .63 3.13 3.75 5.50 x 4.50 15 RSM-500 5.91 19.49 17.52 16.93 3.35 1241 CLL-8006
100 (98.1) .63 3.38 4.00 11.81 25.39 25.39 16.93 3.35 1625 CLL-80012
150 (153.4) .63 3.94 4.56 6.50 x 5.50 25 RSM-750 1.97 17.91 37.20 16.93 3.94 1565 CLL-10002
5.91 21.85 19.88 19.88 3.94 1918 CLL-10006
20 (22.1) 1.75 3.88 5.63 7.00 x 6.00 32 RSM-1000 11.81 27.76 27.76 19.88 3.94 2446 CLL-100012
1.97 19.49 39.57 19.88 4.33 2094
30 (32.4) 2.44 3.63 7.06 8.50 x 7.50 58 RSM-1500 5.91 23.43 21.46 22.05 4.33 2517
50 (48.1) 2.38 4.81 7.19 11.81 29.33 29.33 22.05 4.33 3151
100 (98.1) 2.25 5.56 7.81 3.63 11 RCS-201 41.14 22.05

4.00 15 RCS-302
4.88 24 RCS-502

6.50 50 RCS-1002

50