2024/2025 Superior Tool Rental & Repair Catalog

Item # Color Eye Approx. Weight of Vertical Choker Basket Length Per Foot Eyes VEE1 Purple 2,600 lbs 2,100 lbs 5,200 lbs 10" .26 lb VEE2 Green 5,300 lbs 4,200 lbs 10,600 lbs 10" .37 lb VEE3 Yellow 8,400 lbs 6,700 lbs 16,800 lbs 12" .52 lb VEE4 Tan 10,600 lbs 8,500 lbs 21,200 lbs 12" .62 lb VEE5 Red 13,200 lbs 10,600 lbs 26,400 lbs 14" .83 lb VEE6 Orange 16,800 lbs 13,400 lbs 33,600 lbs 16" .98 lb VEE7 Blue 21,200 lbs 17,000 lbs 42,400 lbs 16" 1.50 lbs Item # Width Eye Vertical Choker Basket Length 862RNT 2" 5,000 lbs 4,000 lbs 10,000 lbs 10" 1.6 lbs .18 lb 892RNT 2" 7,000 lbs 6,000 lbs 14,000 lbs 10" 1.9 lbs .22 lb 864RNT 4" 10,000 lbs 8,000 lbs 20,000 lbs 12" 3.2 lbs .36 lb 894RNT 4" 14,000 lbs 11,200 lbs 28,000 lbs 12" 3.8 lbs .44 lb Rated Capacity Weight 8' Base Add/ft Item # Sling Approx. Approx. Color Diameter Vertical Choker Basket Weight Per Foot VR1 Purple .60" 2,600 lbs 2,080 lbs 5,200 lbs .20 lb VR2 Green .80" 5,300 lbs 4,240 lbs 10,600 lbs .30 lb VR3 Yellow 1.00" 8,400 lbs 6,720 lbs 16,800 lbs .46 lb VR4 Tan 1.20" 10,600 lbs 8,500 lbs 21,200 lbs .54 lb VR5 Red 1.30" 13,200 lbs 10,560 lbs 26,400 lbs .78 lb VR6 Orange 1.40" 16,800 lbs 13,440 lbs 33,600 lbs .87 lb VR7 Blue 1.55" 21,200 lbs 17,000 lbs 42,400 lbs 1.12 lbs VR8 Orange 1.75" 25,000 lbs 20,000 lbs 50,000 lbs 1.51 lbs VR9 Orange 1.95" 31,000 lbs 24,800 lbs 62,000 lbs 2.06 lbs VR10 Orange 2.35" 40,000 lbs 32,000 lbs 80,000 lbs 2.86 lbs VR11 Orange 3.15" 52,900 lbs 42,320 lbs 105,800 lbs 3.59 lbs VR12 Orange 3.95" 66,100 lbs 52,880 lbs 132,200 lbs 4.58 lbs VR13 Orange 4.80" 90,000 lbs 72,000 lbs 180,000 lbs 6.14 lbs Viking™ Seamed Polyester Round Slings Eye & Eye Polyester Round Slings Rough N’ Tough Nylon Slings Rated Capacity Rated Capacity SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS NYLON & POLYESTER SLINGS 151

One Leg Eye & Eye Wire Rope Slings Wire Rope/Aircraft Cable* Vertical Choker Basket Vertical Choker Basket Vertical Choker Basket 1/4 2x4 .65 .48 1.3 .5 .34 1 .49 .38 .99 3/8 4x8 1.4 1.1 2.9 1.1 .74 2.2 1.1 .85 2.1 1/2 4x8 2.5 1.9 5.1 1.9 1.3 3.7 1.8 1.5 3.7 5/8 5x10 3.9 2.9 7.8 2.8 1.9 5.5 2.8 2.3 5.6 3/4 6x12 5.6 4.1 11 4.1 2.8 8.1 3.9 3.3 7.8 7/8 7x14 7.6 5.6 15 5.4 3.7 11 5.2 4.5 10 1 8x16 9.8 7.2 20 6.9 4.7 14 6.7 5.9 13 1-1/8 9x18 12 9.1 24 8.3 5.8 17 - - - 1-1/4 10x20 15 11 30 9.9 7 20 - - - 1-3/8 11x22 18 13 36 - - - - - - 1-1/2 12x24 21 16 42 - - - - - - 1/16 - - - - .24 .24 - - .008 3/32 - - - .46 .50 .46 - - .016 1/8 - - 1.00 .88 .85 .88 - - .029 5/32 - - 1.40 1.20 - 1.20 - - .045 3/16 - - 2.10 1.85 1.85 - - - .065 7/32 - - 2.80 2.50 - - - - .086 1/4 3.40 3.02 3.50 3.20 3.10 - .12 .11 .110 5/16 5.27 4.69 4.90 4.50 - - .18 .16 .173 3/8 7.55 6.72 7.20 6.00 - - .26 .24 .243 7/16 10.20 9.10 - - - - .35 .32 - 1/2 13.30 11.80 - - - - .46 .42 - 9/16 16.80 14.90 - - - - .59 .53 - 5/8 20.60 18.30 - - - - .72 .66 - 3/4 29.40 26.20 - - - - 1.04 .95 - 7/8 39.80 35.40 - - - - 1.42 1.29 - 1 51.70 46.00 - - - - 1.85 1.68 - 1-1/8 65.00 57.80 - - - - 2.34 2.13 - 1-1/4 79.90 71.10 - - - - 2.89 2.63 - 1-3/8 96.00 85.50 - - - - 3.50 3.18 - 1-1/2 114.00 101.00 - - - - 4.16 3.78 - * Not intended for aircraft use. Designed for industrial and marine applications. ** 6x25 and 6x37 breaking strengths are the same. Type 10 (6x26) “Tough-Lock™” Mechanical Sling Type 33 (7x7x19) “Cable-Flex™” Mechanical Sling Type 30 (6x26) Riggers Hand Splice * * * * * * * * Ratings based on a minimum D/d ratio of 25 (D =curvature around which the body is bent; d=diameter of wire rope) Wire Rope 6x25 & 6x37** EIPS IWRC FC Aircraft Cable* 7x7 GALV SS Aircraft Cable* 7x19 GALV SS Diameter (in) Weight Pounds Per Foot IWRC FC A/C • Breaking strengths tonnage and approximate weights SPECIFICATIONS SPECIFICATIONS WIRE ROPE SLINGS Rope Eye Diameter Size (in) (in) (AXB) Rated Capacity (Tons) Breaking Strength Tonnage 152

Observe Rated Capacity ! WARNING! Work load limits will be reduced when less than 90º from horizontal (see efficiency chart) Angles of less than 30º are not to be used. Inspect before use. Additional requirements and safe operating practices are outlined in current OSHA, Federal Register Part 29, 1910.184 and ASME B30.9 c-2000. Death or injury can occur from improper use or maintenance! Sling working load limits whether nylon, wire rope or chain slings are rated with their respective vertical, choker, and basket capacities. When selecting these slings, careful consideration must be made for the proper sling to load horizontal lifting angle. The greater angle to sling configuration will result in a reduction of sling efficiency and a loss of rated work load limits! SEE ILLUSTRATION AT LEFT: (A) At a 90º sling to load angle the sling is at 100% of the WLL. (B) At a 60º sling to load angle a loss of 14% efficiency occurs and the sling is capable of lifting only 8,600 lbs. (C) At a 45º sling to load angle a loss of 30% efficiency occurs and the sling is capable of lifting only 7,000 lbs. (D) At a 30º sling to load angle the working load limit is reduced by 50% and the sling is capable of lifting only 5,000 lbs. Horizontal Lift Angle Efficiency Rating Loss of Rating 90º 100% 0% 80º 98% 2% 70º 94% 6% 60º 86% 14% 50º 76% 24% 45º 70% 30% 40º 64% 36% 30º 50% 50% Load Angle Efficiency SLING TO LOAD ANGLE EFFICIENCY 153

Diameter Take Length Length Length Diameter Width Length Length Thread Up Closed Open Inside Inside Closed Position Position A B C D E F G H .54 3/8 6 11.49 16.85 7.2 .39 .51 1.14 1.92 1.03 1 1/2 6 12.79 17.91 7.59 .47 .7 1.41 2.28 1.85 1 1/2 9 15.74 23.89 10.59 .47 .7 1.41 2.24 2.31 1 1/2 12 18.74 29.92 13.62 .47 .7 1.41 2.24 2.77 1.59 5/8 6 15 19.8 7.99 .55 .82 1.73 3.11 2.97 1.59 5/8 9 17.91 25.78 10.98 .55 .82 1.73 3.07 3.52 1.59 5/8 12 20.91 31.81 14.01 .55 .82 1.73 3.07 4.23 2.36 3/4 6 16.29 20.94 8.38 .66 .98 2.12 3.54 4.47 2.36 3/4 9 19.21 26.92 11.37 .66 .98 2.12 3.5 5.48 2.36 3/4 12 22.2 32.95 14.4 .66 .98 2.12 3.5 5.84 2.36 3/4 18 28.22 44.96 20.39 .66 .98 2.12 3.5 6.74 2.27 7/8 12 23.66 34.21 14.8 .78 1.25 2.4 3.93 8.77 3.27 7/8 18 29.68 46.22 20.78 .78 1.25 2.4 3.97 11.28 4.54 1 6 19.56 23.77 9.17 .94 1.41 2.95 4.64 9.59 4.54 1 12 25.47 35.78 15.19 .94 1.41 2.95 4.6 13.05 4.54 1 18 31.41 47.79 21.18 .94 1.41 2.95 4.6 15.8 4.54 1 24 37.4 59.72 27.16 .94 1.41 2.95 4.56 16.57 6.9 1-1/4 12 27.99 38.74 15.15 1.18 1.81 3.54 5.7 21.6 6.9 1-1/4 18 33.89 50.62 21.14 1.18 1.81 3.54 5.66 24.93 6.9 1-1/4 24 39.92 62.59 27.12 1.18 1.81 3.54 5.66 26.67 9.71 1-1/2 12 29.76 40.27 15.78 1.25 2.12 4.13 6.14 31.3 9.71 1-1/2 18 36.06 52.55 21.77 1.25 2.12 4.13 6.29 36.37 9.71 1-1/2 24 41.92 64.37 27.75 1.25 2.12 4.13 6.22 37.69 12.7 1-3/4 18 40.11 54.96 22.71 1.49 2.36 4.68 7.75 50.92 12.7 1-3/4 24 46.1 66.96 28.7 1.49 2.36 4.68 7.71 57.98 16.8 2 24 49.76 70.19 29.37 1.81 2.71 5.78 9.09 89.72 27.2 2-1/2 24 56.25 77.36 31.49 2 3.14 6.49 10.78 141.09 34 2-3/4 24 59.17 80.23 31.49 2.24 3.3 7 12.24 194 Diameter Take Length Length Length Opening Length Diameter Thickness Diameter Thread Up Closed Open Closed Jaw Inside Pin Jaw Eye Jaw Eye Position Position Position A B C D E F G H I 2.36 3/4 6 14.48 19.17 17.24 .94 1.49 .62 .62 1.61 5.9 2.36 3/4 9 17.40 25.15 20.15 .94 1.49 .62 .62 1.61 6.68 2.36 3/4 12 20.39 31.14 20.78 .94 1.49 .62 .62 1.61 7.25 2.36 3/4 18 24.29 43.11 29.13 .94 1.49 .62 .62 1.61 8.04 3.27 7/8 12 22 32.48 25.03 1.06 1.65 .74 .74 1.88 10.8 3.27 7/8 18 28.03 44.52 31.06 1.06 1.65 .74 .74 1.88 13.11 4.54 1 6 17.59 21.85 21.06 1.18 1.96 .86 .78 2.16 11.48 4.54 1 12 35.35 33.81 26.88 1.18 1.96 .86 .78 2.16 15.34 4.54 1 18 29.52 48.82 32.87 1.18 1.96 .86 .78 2.16 18.51 4.54 1 24 35.51 57.83 38.85 1.18 1.96 .86 .78 2.16 19.62 6.9 1-1/4 12 25.23 36.06 29.44 1.73 2.79 1.14 1.02 2.67 26.23 6.9 1-1/4 18 31.22 47.95 35.43 1.73 2.79 1.14 1.02 2.67 29.98 6.9 1-1/4 24 37.83 60.55 42.08 1.73 2.79 1.14 1.02 2.67 31.3 9.71 1-1/2 12 26.57 37.04 31.73 2.04 2.79 1.37 1.1 3.14 37.25 9.71 1-1/2 18 32.48 48.97 37.63 2.04 2.79 1.37 1.1 3.14 42.55 9.71 1-1/2 24 38.58 61.02 43.74 2.04 2.79 1.37 1.1 3.14 45.63 12.7 1-3/4 18 36.73 51.57 43.11 2.32 3.38 1.65 1.29 3.54 55.11 12.7 1-3/4 24 42.67 63.54 49.05 2.32 3.38 1.65 1.29 3.54 63.27 16.8 2 24 45.39 65.82 52.67 2.48 3.66 2 1.61 4.25 100.08 27.2 2-1/2 24 49.37 72.04 58.22 2.95 4.48 2.24 1.61 5.62 194 34 2-3/4 24 51.37 73.93 61.45 3.54 4.33 2.75 1.61 6.22 216.05 HG-228 Green Pin® Jaw & Jaw Turnbuckles with Cotter Pin Green Pin® Eye & Eye Turnbuckles SPECIFICATIONS SPECIFICATIONS Dimensions (in) Dimensions (in) TURNBUCKLES Working Load Limit (tons) Working Load Limit (tons) Weight (lbs) Weight (lbs) 154

Dia. Take Length Length Opening Length Dia. Thickness Dia. Dia. Width Length Length Thread Up Closed Open Jaw Inside Pin Jaw Eye Jaw Eye Jaw Eye Inside Inside Closed Position Position Jaw A B C D E F G H I J K L .54 3/8 6 11.14 16.45 .47 .82 .31 .35 .82 .39 .51 1.49 1.92 1.12 1 1/2 6 12.4 17.51 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.28 1.96 1 1/2 9 15.31 23.5 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.24 2.42 1 1/2 12 18.3 29.48 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.24 2.88 1.59 5/8 6 14.29 19.13 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.11 3.48 1.59 5/8 9 17.24 25.11 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.07 4.05 1.59 5/8 12 20.23 31.10 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.07 4.89 2.36 3/4 6 15.39 20.03 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.54 5.15 2.36 3/4 9 18.3 26.02 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 5.99 2.36 3/4 12 21.29 32.04 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 6.5 2.36 3/4 18 27.32 44.01 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 7.27 3.27 7/8 12 22.83 33.34 1.06 1.65 .74 .74 1.88 .78 1.25 2.40 3.93 9.59 3.27 7/8 18 28.85 45.35 1.06 1.65 .74 .74 1.88 .78 1.25 2.40 3.97 12.03 4.54 1 6 18.58 22.79 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.64 10.27 4.54 1 12 24.52 34.8 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.6 13.99 4.54 1 18 30.51 46.81 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.6 17.59 4.54 1 24 36.45 58.77 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.56 18.49 6.9 1-1/4 12 26.61 37.36 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.7 24.07 6.9 1-1/4 18 32.75 49.48 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.66 24.25 6.9 1-1/4 24 38.89 61.57 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.66 28.43 9.71 1-1/2 12 28.18 38.66 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.14 28.88 9.71 1-1/2 18 34.29 50.74 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.29 32.40 9.71 1-1/2 24 40.23 62.71 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.22 39.24 12.7 1-3/4 18 38.58 53.38 2.32 3.38 1.65 1.29 3.54 1.49 2.36 4.68 7.75 49.16 12.7 1-3/4 24 44.52 65.39 2.32 3.38 1.65 1.29 3.54 1.49 2.36 4.68 7.71 60.62 16.8 2 24 47.55 68.03 2.48 3.66 2 1.61 4.25 1.81 2.71 5.78 9.09 94.57 27.2 2-1/2 24 52.79 73.46 2.95 4.48 2.24 1.61 5.62 2 3.14 6.49 10.78 149.91 34 2-3/4 24 55.27 75.7 3.54 4.33 2.75 1.61 6.22 2.24 3.3 7 112.24 200.62 1032493 500 .37 .25 .45 1.66 .64 11.19 7.19 12.18 8.18 4.07 1032518 800 .56 .31 .50 2.02 .87 13.07 8.57 14.12 9.62 4.58 1032536 1200 .85 .38 .53 2.11 .85 16.25 10.25 17.50 11.50 6.10 1032554 2200 1.82 .50 .64 3.22 1.07 18.65 12.65 20.14 14.14 6.03 1032572 2200 2.29 .50 .64 3.20 1.07 24.94 15.94 26.43 17.43 9.36 1032590 2200 2.71 .50 .64 3.20 1.07 30.94 18.94 32.43 20.43 12.36 1032616 3500 3.21 .63 .79 3.90 1.32 19.74 13.74 21.82 15.18 6.03 1032634 3500 3.95 .63 .79 3.89 1.32 26.08 17.08 28.16 19.16 9.39 1032652 3500 4.58 .63 .79 3.89 1.32 32.08 20.08 34.16 22.16 12.39 1032670 5200 4.80 .75 .97 4.71 1.52 21.09 15.09 23.68 17.68 6.13 1032698 5200 5.85 .75 .97 4.68 1.52 27.49 18.49 30.08 21.08 9.59 1032714 5200 6.72 .75 .97 4.68 1.52 33.49 21.49 36.08 24.08 12.59 1032732 5200 8.45 .75 .97 4.71 1.52 45.49 27.49 48.08 30.08 18.53 1032750 7200 9.37 .88 1.16 5.50 1.77 34.65 22.65 37.62 25.62 12.16 1032778 7200 11.8 .88 1.16 5.50 1.77 47.12 29.12 50.09 32.09 18.63 1032796 10000 10.4 1.00 1.34 6.09 2.05 23.82 17.82 27.18 21.18 6.18 1032812 10000 13.8 1.00 1.34 6.09 2.05 35.82 23.82 39.18 27.18 12.18 1032830 10000 17.1 1.00 1.34 6.09 2.05 47.82 29.82 51.18 33.18 18.18 1032858 10000 21.0 1.00 1.34 6.09 2.05 60.42 36.42 63.78 39.78 24.84 1032876 15200 21.9 1.25 1.84 8.09 2.82 39.37 27.37 43.58 31.58 12.06 1032894 15200 25.9 1.25 1.84 8.09 2.82 51.37 33.37 55.58 37.58 18.06 1032910 15200 29.8 1.25 1.84 8.09 2.82 63.93 39.93 68.14 44.14 24.62 1032938 21400 32.6 1.50 2.06 8.93 2.81 40.76 28.76 45.68 33.68 12.32 1032956 21400 38.0 1.50 2.06 8.93 2.81 52.76 34.76 57.68 39.68 18.32 1032974 21400 43.5 1.50 2.06 8.93 2.81 65.38 41.38 70.30 46.30 24.94 1033018 28000 53.5 1.75 2.60 9.36 3.35 53.35 35.35 59.16 41.16 18.37 1033036 28000 61.1 1.75 2.60 9.36 3.35 65.35 41.35 71.16 47.16 24.37 1033054 37000 96.3 2.00 2.62 11.80 3.74 69.64 45.64 76.72 52.72 24.48 1033072 60000 167 2.50 3.06 13.26 4.44 72.97 48.97 82.18 58.18 24.60 1033090 75000 199 2.75 3.69 14.92 4.19 74.75 50.75 85.50 61.50 24.65 † 1/4 x 4 † 5/16 x 4-1/2 † 3/8 x 6 1/2 x 6 1/2 x 9 1/2 x 12 5/8 x 6 5/8 x 9 5/8 x 12 3/4 x 6 3/4 x 9 3/4 x 12 3/4 x 18 7/8 x 12 7/8 x 18 1 x 6 1 x 12 1 x 18 1 x 24 1-1/4 x 12 1-1/4 x 18 1-1/4 x 24 1-1/2 x 12 1-1/2 x 18 1-1/2 x 24 1-3/4 x 18 1-3/4 x 24 2 x 24 2-1/2 x 24 2-3/4 x 24 E J K M N A B Closed G Open Closed Open Closed BB Thread Dia. Item # & Take Up Working Load Limit (lbs)* Weight Ea. (lbs) *Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized Green Pin® Eye & Jaw Turnbuckles with Cotter Pin HG-228 Jaw & Jaw Turnbuckles with Cotter Pin SPECIFICATIONS SPECIFICATIONS Dimensions (in) Dimensions (in) TURNBUCKLES Working Load Limit (tons) Weight (lbs) 155

1031877 500 .33 .25 .45 1.66 .64 11.57 7.57 12.28 8.28 .81 .34 1.76 4.07 1031895 800 .52 .31 .50 2.02 .87 13.50 9.00 14.30 9.80 .95 .44 2.20 4.58 1031911 1200 .80 .38 .53 2.11 .85 16.91 10.91 17.87 11.87 1.13 .53 2.48 6.10 1031939 2200 1.77 .50 .64 3.22 1.07 19.30 13.30 20.48 14.48 1.41 .71 3.56 6.03 1031957 2200 2.25 .50 .64 3.20 1.07 25.59 16.59 26.77 17.77 1.41 .71 3.54 9.36 1031975 2200 2.67 .50 .64 3.20 1.07 31.59 19.59 32.77 20.77 1.41 .71 3.54 12.36 1031993 3500 2.98 .63 .79 3.90 1.32 20.73 14.73 22.27 16.27 1.80 .88 4.35 6.03 1032019 3500 3.72 .63 .79 3.89 1.32 27.07 18.07 28.67 19.61 1.80 .88 4.34 9.39 1032037 3500 4.35 .63 .79 3.89 1.32 33.07 21.07 34.61 22.61 1.80 .88 4.34 12.39 1032055 5200 4.51 .75 .97 4.71 1.52 22.17 16.17 24.09 18.09 2.09 1.00 5.12 6.13 1032073 5200 5.56 .75 .97 4.68 1.52 28.57 19.57 30.49 21.49 2.09 1.00 5.09 9.59 1032091 5200 6.42 .75 .97 4.68 1.52 34.57 22.57 36.49 24.49 2.09 1.00 5.09 12.59 1032117 5200 8.14 .75 .97 4.71 1.52 46.57 28.57 48.49 30.49 2.09 1.00 5.12 18.53 1032135 7200 9.10 .88 1.16 5.50 1.77 35.68 23.68 37.91 25.91 2.38 1.25 5.79 12.16 1032153 7200 11.6 .88 1.16 5.50 1.77 48.15 30.15 50.38 32.38 2.38 1.25 5.79 18.63 1032171 10000 10.0 1.00 1.34 6.09 2.05 25.03 19.03 27.59 21.59 3.00 1.43 6.50 6.18 1032199 10000 13.4 1.00 1.34 6.09 2.05 37.03 25.03 39.59 27.59 3.00 1.43 6.50 12.18 1032215 10000 16.7 1.00 1.34 6.09 2.05 49.03 31.03 51.59 33.59 3.00 1.43 6.50 18.18 1032233 10000 20.6 1.00 1.34 6.09 2.05 61.63 37.63 64.19 40.19 3.00 1.43 6.47 24.84 1032251 15200 20.9 1.25 1.84 8.09 2.82 40.76 28.76 43.98 31.98 3.59 1.82 8.49 12.06 1032279 15200 24.8 1.25 1.84 8.09 2.82 52.76 34.76 55.98 37.98 3.59 1.82 8.49 18.06 1032297 15200 28.8 1.25 1.84 8.09 2.82 65.32 41.32 68.54 44.54 3.59 1.82 8.49 24.62 1032313 21400 30.6 1.50 2.06 8.93 2.81 42.50 30.50 46.21 34.21 4.09 2.12 9.46 12.32 1032331 21400 36.0 1.50 2.06 8.93 2.81 54.50 36.50 58.21 40.21 4.09 2.12 9.46 18.32 1032359 21400 41.5 1.50 2.06 8.93 2.81 67.12 43.12 70.83 46.83 4.09 2.12 9.46 24.94 1032395 28000 52.1 1.75 2.60 9.36 3.35 55.37 37.37 59.77 41.77 4.65 2.38 9.97 18.37 1032411 28000 59.7 1.75 2.60 9.36 3.35 67.37 43.37 71.77 47.77 4.65 2.38 9.97 24.37 1032439 37000 89.9 2.00 2.62 11.80 3.74 72.66 48.66 77.95 53.95 5.81 2.69 13.03 24.48 1032457 60000 158 2.50 3.06 13.26 4.44 76.08 52.08 82.68 58.68 6.49 3.12 13.76 24.60 1032475 75000 187 2.75 3.69 14.92 4.19 78.05 54.05 85.67 61.67 7.00 3.25 15.09 24.65 † 1/4 x 4 † 5/16 x 4-1/2 † 3/8 x 6 1/2 x 6 1/2 x 9 1/2 x 12 5/8 x 6 5/8 x 9 5/8 x 12 3/4 x 6 3/4 x 9 3/4 x 12 3/4 x 18 7/8 x 12 7/8 x 18 1 x 6 1 x 12 1 x 18 1 x 24 1-1/4 x 12 1-1/4 x 18 1-1/4 x 24 1-1/2 x 12 1-1/2 x 18 1-1/2 x 24 1-3/4 x 18 1-3/4 x 24 2 x 24 2-1/2 x 24 2-3/4 x 24 Item # Working Load Limit (lbs)* E J K M N X A B Closed G Open Closed Open Closed R S Closed BB 1031252 500 .29 .25 11.94 7.94 12.38 8.38 .81 .34 1.76 4.07 1031270 800 .48 .31 13.92 9.42 14.48 9.98 .95 .44 2.20 4.58 1031298 1200 .75 .38 17.56 11.56 18.24 12.24 1.13 .53 2.48 6.10 1031314 2200 1.72 .50 19.94 13.94 20.82 14.82 1.41 .71 3.56 6.03 1031350 2200 2.63 .50 32.23 20.23 33.11 21.11 1.41 .71 3.54 12.36 1031378 3500 2.75 .63 21.72 15.72 22.72 16.72 1.80 .88 4.35 6.03 1031412 3500 4.12 .63 34.06 22.06 35.06 23.06 1.80 .88 4.34 12.39 1031430 5200 4.22 .75 23.24 17.24 24.50 18.50 2.09 1.00 5.12 6.13 1031476 5200 6.12 .75 35.64 23.64 36.90 24.90 2.09 1.00 5.09 12.59 1031494 5200 7.83 .75 47.64 29.64 48.90 30.90 2.09 1.00 5.12 18.53 1031519 7200 8.83 .88 36.70 24.70 38.20 26.20 2.38 1.25 5.79 12.16 1031537 7200 11.5 .88 49.17 31.17 50.67 32.67 2.38 1.25 5.79 18.63 1031555 10000 9.62 1.00 26.24 20.24 28.00 22.00 3.00 1.43 6.50 6.18 1031573 10000 13.0 1.00 38.24 26.24 40.00 28.00 3.00 1.43 6.50 12.18 1031591 10000 16.3 1.00 50.24 32.24 52.00 34.00 3.00 1.43 6.50 18.18 1031617 10000 20.2 1.00 62.84 38.84 64.60 40.60 3.00 1.43 6.47 24.84 1031635 15200 19.9 1.25 42.14 30.14 44.38 32.38 3.59 1.82 8.49 12.06 1031653 15200 23.8 1.25 54.14 36.14 56.38 38.38 3.59 1.82 8.49 18.06 1031671 15200 27.8 1.25 66.70 42.70 68.94 44.94 3.59 1.82 8.49 24.62 1031699 21400 28.7 1.50 44.24 32.24 46.74 34.74 4.09 2.12 9.46 12.32 1031715 21400 34.1 1.50 56.24 38.24 58.74 40.74 4.09 2.12 9.46 18.32 1031733 21400 39.6 1.50 68.86 44.86 71.36 47.36 4.09 2.12 9.46 24.94 1031779 28000 50.7 1.75 57.38 39.38 60.38 42.38 4.65 2.38 9.97 18.37 1031797 28000 58.2 1.75 69.38 45.38 72.38 48.38 4.65 2.38 9.97 24.37 1031813 37000 83.5 2.00 75.68 51.68 79.18 55.18 5.81 2.69 13.03 24.48 1031831 60000 149 2.50 79.18 55.18 83.18 59.18 6.49 3.12 13.76 24.60 1031859 75000 174 2.75 81.34 57.34 85.84 61.84 7.00 3.25 15.09 24.65 † 1/4 x 4 † 5/16 x 4-1/2 † 3/8 x 6 1/2 x 6 1/2 x 12 5/8 x 6 5/8 x 12 3/4 x 6 3/4 x 12 3/4 x 18 7/8 x 12 7/8 x 18 1 x 6 1 x 12 1 x 18 1 x 24 1-1/4 x 12 1-1/4 x 18 1-1/4 x 24 1-1/2 x 12 1-1/2 x 18 1-1/2 x 24 1-3/4 x 18 1-3/4 x 24 2 x 24 2-1/2 x 24 2-3/4 x 24 J K M N X A Open Closed Open Closed R S Closed BB Thread Dia. & Take Up Thread Dia. & Take Up Item # Working Load Limit (lbs)* Weight Each (lbs) *Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized *Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized Weight Each (lbs) HG-226 Eye & Eye Turnbuckles HG-227 Jaw & Eye Turnbuckles SPECIFICATIONS SPECIFICATIONS Dimensions (in) Dimensions (in) TURNBUCKLES 156

A 14.17" B 10.91" C 2.2" D 5.28" E 2.68" F 2.28" Ratchet Binders DIMENSIONS RATCHET BINDERS DYNAMOMETER Item # LLXh Maximum Capacity 25 ton Test Load 50 ton Safety Coeifficient Minimum 4 0.2 % acco SO 376. 69.8ºF 50 daN Increment 10 daN Max. Display 27500 daN Autonomy From 300 to 1000 h depending of functions Radio Scope 262.47 ft (in open field) (I.P. 219.82 = 196.85) RF Technology 2.4 Ghz Weight 14.55 lbs IP Protection I.P. 65 (Option: I.P. 67) Usage From -4º to 104ºF Sensitivity to Tº 0.05% per 50ºF Sensor Material Aluminum DYNAFOR Load Indicator SPECIFICATIONS Precision Size Max Dimensions Capacity A B C D E F G H I J (Pin) (Dia.) (Clevis Jaw) (Handle) (Ref.) (Useable Threads) (Ratchet Barrel) (Ref.) 1-3/8" 28,300 lbs 1" x 3-7/8" 1.25" 2.375" 35" Min. 1-3/8" x 12" 1-3/8" x 22" 5.5" 12" 1-3/8" x 24" 3.5" 56.25" Max. 1.375" Acme 4–Pitch 1-3/4" 42,000 lbs 1-5/8" x 6" 2.37" 2.87" 37 Min. 1.75" x 12" 1.75" x 22" 6.5" 12" 1.75" x 24" 4" 57.5 Max. 1.75" Acme 4–Pitch 2" 55,000 lbs 2" x 7" 2.5" 3.5" 39" Min. 2" x 12" 2" x 26" 7.5" 12" 2" x 24" 4.78" 59" Max. 2" Acme 4–Pitch SPECIFICATIONS 157

PULLING

TOP VIEW TOP VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW 1,000 LB Standard Electric Winch-Hoist 3,000 LB Max Electric Winch-Hoist ELECTRIC WINCHES Item # 100AB Long lift applications Applications Multiple story construction site work Pull rolling loads up to 25,000 lbs Tower erection and maintenance Capacity Double Line: 2,000 lbs Single Line: 1,100 lbs 1/8" 1,000 ft Drum Storage 3/16" 450 ft 1/4" 250 ft 5/16" 150 ft Power • Universal 18,500 rpm • Reversible 1.25 hp brake motor Power Source 15 ft power cord plugs into any 115 V AC grounded outlet No Load 6 amp Full Load 14 amp 1,000 lbs 1-2 layers of cable (39 ft of 1/4" cable) 850 lbs 3 layers of cable (65 ft of 1/4" cable) Lifting Capacity 600 lbs full drum of cable (250 ft of 1/4" cable) Incline Max Load Weight 0% – (0) 25,000 lbs 10% – (6º) 8,000 lbs Pulling Capacity 20% – (11º) 4,000 lbs Rolling Load 40% – (22º) 2,100 lbs 60% – (31º) 1,500 lbs 80% – (39º) 1,300 lbs 100% – (45º) 1,100 lbs Weight 76 lbs Item # AC36B Ideal for in-plant use Applications Installation of elevator equipment Lifting motors and heavy apparatus Moving equipment Capacity Double Line: 6,000 lbs Single Line: 3,000 lbs 1/4" 250 ft Drum Storage 5/16" 160 ft 3/8" 110 ft • Universal 18,500 rpm Power • Reversible 1.25 HP brake motor Power Source 15 ft power cord plugs into any 115 V AC grounded outlet No Load 6 amp Full Load 14 amp 3,000 lbs 2 layers of cable (54 ft of 5/16" cable) Lifting Capacity 2,650 lbs 3 layers of cable (100 ft of 5/16" cable) 2,150 lbs full drum of cable (160 ft of 5/16" cable) Incline Max Load Weight 0% – (0) 75,000 lbs 10% – (6º) 24,000 lbs Pulling Capacity 20% – (11º) 12,200 lbs Rolling Load 40% – (22º) 6,400 lbs 60% – (31º) 4,600 lbs 80% – (39º) 3,800 lbs 100% – (45º) 3,300 lbs Weight 132 lbs SPECIFICATIONS SPECIFICATIONS 159

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS Item # 1,100 LB 2,500 LB 2,500 LB 3,000 LB 4,400 LB Drum Short Short Long Long Long Brake Manual Brake Auto Brake Auto Brake Manual Brake Auto Brake Line Speed at Capacity 62 ft/min 150 ft/min 150 ft/min 150 ft/min 62 ft/min 213 ft of 1/4" 737 ft of 3/8" 1,520 ft of 3/8" 1,445 ft of 3/8" 952 ft of 7/16" Cable Capacity 147 ft of 5/16" 411 ft of 1/2" 852 ft of 1/2" 813 ft of 1/2" 768 ft of 1/2" 253 ft of 5/8" 524 ft of 5/8" Air Inlet Thread 3/4" 1" 1" 1-1/4" 1" Hose Size 1" 1" 1" 1" 1" Average Air Cons. @ 90 psi 71 cfm 175 cfm 175 cfm 191 cfm 191 cfm Weight w/o Rope 97 lbs 490 lbs 562 lbs 598 lbs 654 lbs Item # 1,100 LB 2,500 LB 2,500 LB 3,000 LB 4,400 LB A 21.10" 32-7/8" 40-15/16" 40-15/16" 40.55" B 4.49" 7-1/8" 15-3/16" 15-3/16" 14.02 " C 12.68" 22-5/16" 30-3/8" 30-3/8" 28.03" D Air Inlet Pipe Tap 3/4" 1-1/4" 1-1/4" 1-1/4" 1" E Exhaust Pipe Tap 3/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" F 9.6" 18-1/4" 18-1/4" 18-1/4" 23.35" SPECIFICATIONS DIMENSIONS AIR TUGGERS 160

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS Item # 5,000 LB 6,600 LB 10,000 LB 11,000 LB 22,000 LB Drum Short Long Long Long Long Brake Auto Brake Auto Brake Manual Brake Auto Brake Auto Brake Line Speed at Capacity 62 ft/min 62 ft/min 55 ft/min 62 ft/min 27.9 ft/min 851 ft of 7/16" 820 ft of 3/4" 820 ft of 3/4" Cable Capacity 715 ft of 1/2" 1,050 ft of 5/8" 755 ft of 7/8" 755 ft of 7/8" 457 ft of 5/8" Air Inlet Thread 1-1/4" 1-1/4" 1-1/4" 1-1/4" 2" Hose Size 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" Average Air Cons. @ 90 psi 318 cfm 318 cfm 318 cfm 318 cfm 600 cfm Weight w/o Rope 890 lbs 1,161 lbs 1,550 lbs 1,923 lbs 5,071 lbs Item # Double Drum Air Tugger Height 93" Length 95" Width 70" Seat 15" SPECIFICATIONS DIMENSIONS DIMENSIONS AIR TUGGERS 1,460 ft of 7/8" 1,455 ft of 1" 904 ft of 1-1/8" 700 ft of 1-1/4" Item # 5,000 LB 6,600 LB 10,000 LB 11,000 LB 22,000 LB A 39" 50.43" 58-1/2" 57.44" 74.22" B 10" 18.19" 24" 23.62" 19.69" C 25-3/4" 30.32" 31.04" 40.99" 42.19" D Air Inlet Pipe Tap 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" E Exhaust Pipe Tap 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2 min" F 21-3/4" 28.62" 25.98" 34.72" 41.34" SPECIFICATIONS Double, Long Drum Air Tugger Skid Unit with Auto Brake Item # Double Drum Air Tugger Single Tugger Capacity Min 4,400 lbs Single Tugger Capacity Max 11,000 lbs Drum Long Air Inlet Thread 1-1/4" Hose Size 1-1/2" Air Consumption at 90 psi Min 191 cfm for Single Tugger Max 318 cfm Brake Type Auto Mount Safety Features Protective screen for operator to sit behind while tuggers are in use Dimensions W 70" x L 95" x H 93" Weight of Skid 1,200 lbs • (2) 11,000 LB Long Drum Air Tuggers with Auto Brake, which can be used together or independently • Mounted on a Michigan Pneumatic Tool, Inc. Mounting Skid (MP-W100DD), which places one tugger at a higher level than the other. The higher tugger allows the operator to pay in or pay out cable from each tugger without entanglement. 161

A B C D G H J K L P R S T U V 1035000 3/8" 5.69 2.72 81 .81 1.38 3.06 7.80 1.88 .88 1.56 .44 2.13 .44 1.25 1.38 1035009 1/2" 6.88 3.47 1.00 1.00 1.62 3.76 8.91 1.26 1.06 1.94 .50 2.56 .53 1.75 1.88 1035018 5/8" 8.25 4.30 1.25 1.19 2.12 4.47 10.75 1.99 1.22 2.25 .56 3.25 .69 2.00 2.19 1035027 3/4" 9.88 5.12 1.50 1.38 2.44 5.28 12.36 2.41 1.40 2.63 .66 3.63 .78 2.34 2.56 1035036 7/8" 11.25 5.85 1.75 1.63 2.69 6.16 14.37 2.48 1.67 3.13 .75 4.31 .88 2.69 2.94 1035045 1" 12.81 6.32 2.00 2.00 2.94 6.96 16.29 3.04 2.00 3.75 .88 4.70 1.03 2.88 3.28 1035054 1-1/8" 14.38 6.92 2.25 2.25 3.31 7.62 18.34 2.56 2.25 4.25 1.00 5.44 1.10 3.25 3.56 1035063 1-1/4" 16.34 8.73 2.62 2.50 3.56 9.39 20.48 2.94 2.34 4.50 1.06 6.13 1.19 4.62 4.94 Wire Rope Diameter S-421T Item # NOTE: For intermediate wire rope sizes, use next larger size socket. • Wedge sockets assembly includes socket, wedge, pin and wire rope clip UB500 “E” Working Load Weight Eye Hook Limit Item # 1036000* 4 tons 58 lbs 1036009* 4 tons 102 lbs 1036027* 4 tons 162 lbs 1036036* 4 tons 201 lbs 1036045* 7 tons 109 lbs 1036054* 7 tons 170 lbs 1036072* 7 tons 210 lbs 1036081* 7 tons 321 lbs 1036090* 10 tons 216 lbs 1036099* 10 tons 260 lbs 1036117* 10 tons 365 lbs 1036126* 10 tons 403 lbs 1036135* 10 tons 718 lbs Item # 2003822 2003830 2003831 2003832 Wire Rope Sizes 1/4"-5/16" 3/8" 1/2"-5/8" 5/8" - 3/4" - 7/8" Weight 15 lbs 20 lbs 50 lbs 100 lbs Ball Diameter 5.06" 5.38" 7.12" 9.19" * Utilizes Crosby “N” style hooks with integrated latch. Replacement latch kit is S-4055 latch will not fit. Standard Crosby S-5 Thrust Style Swivels cannot be used with UB500 Overhaul Balls for replacement swivels, contact Our Customer Service. S-421T Wedge Sockets CUP BASE LIVE PAT. PEND 3/4 GO CUP BASE LIVE PAT. PEND 3/4 GO CUP BASE LIVE PAT. PEND 3/4 GO DIMENSIONS SPECIFICATIONS Overhaul Ball Assembly Split Overhaul Balls UB500 “E” Working Load Weight Eye Hook Limit Item # 1036144* 12 tons 216 lbs 1036153* 12 tons 258 lbs 1036171* 12 tons 365 lbs 1036180* 12 tons 403 lbs 1036189* 12 tons 718 lbs 1036198* 15 tons 298 lbs 1036207* 15 tons 456 lbs 1036216* 15 tons 753 lbs 1036225* 15 tons 1311 lbs 1036234* 20 tons 298 lbs 1036243* 20 tons 456 lbs 1036252* 20 tons 753 lbs 1036261* 20 tons 1311 lbs 1036270* 25 tons 533 lbs 1036279* 25 tons 865 lbs 1036288* 25 tons 1421 lbs 1036297* 30 tons 865 lbs 1036306* 30 tons 1421 lbs WEDGE SOCKETS OVERHAUL BALL ASSEMBLY SPLIT OVERHAUL BALLS Wire Rope Diameter 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" S-421T Item # 1035000 1035009 1035018 1035027 1035036 1035045 1035054 1035063 S-421 TW Item # 1035555 1035564 1035573 1035582 1035591 1035600 1035609 1035618 Wedge Only Optional G-4082 Bolt 1092227 1092236 1092254 1092281 1092307 1092325 1092343 1092372 Nut & Cutter Item # Dimensions (in) SPECIFICATIONS SPECIFICATIONS 163

Swivel # Swivel # Swivel # Item # Item # Item # Working Load Limit (tons*) Working Load Limit (tons*) Wire Rope Size (in) Wire Rope Size (in) Weight (lbs) Weight (lbs) Weight (lbs) C G H J K N O Q R S T 297039 3-S-3 3 1/2 9.12 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25 297235 5-S-3 5 5/8 13.50 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25 297431 8-S-3 8-1/2 3/4 24.90 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50 297636 10-S-3 10 7/8 43.50 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88 297832 15-S-3 15 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12 298136 25-S-3 25 - 135.00 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38 298234 35-S-3 35 - 150.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38 298332 45-S-3 45 - 225.00 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00 Dimensions (in) Dimensions (in) A F G H J K L M N O P V 297011 3-S-1 3 1/2 9.81 11.44 4.84 2.75 .75 .88 1.62 1.53 1.41 1.31 1.00 1.44 1.12 297217 5-S-1 5 5/8 15.51 13.34 6.28 3.00 .88 1.00 2.25 1.94 1.62 1.12 1.00 1.81 1.44 297413 8-S-1 8-1/2 3/4 29.42 16.45 7.54 4.00 1.00 1.56 2.81 2.46 2.22 2.12 1.38 2.25 1.62 297618 10-S-1 10 7/8 46.75 19.75 8.34 4.50 1.50 1.75 3.38 2.59 2.41 3.50 1.75 2.59 1.94 297814 15-S-1 15 1 73.75 22.24 10.34 5.00 1.50 1.75 3.38 2.81 3.19 3.50 1.75 3.00 2.38 298118 25-S-1 25 - 140.00 26.78 13.62 6.00 2.00 2.00 4.62 3.44 3.62 3.69 2.38 3.66 3.00 298216 35-S-1 35 - 220.00 29.94 14.06 6.50 2.00 2.00 4.62 3.88 3.75 3.69 2.38 4.56 3.19 298314 45-S-1 45 - 251.00 35.06 15.44 7.00 2.25 2.50 5.00 4.75 4.25 4.00 3.00 5.06 3.25 S-1 Jaw & Hook S-2 Jaw & Jaw S-3 Jaw & Eye SPECIFICATIONS SPECIFICATIONS SWIVELS B G H J K N O 297020 3-S-2 3 1/2 9.63 9.28 2.75 .75 .88 1.62 1.31 1.00 297226 5-S-2 5 5/8 13.69 10.31 3.00 .88 1.00 2.25 1.62 1.12 297422 8-S-2 8.5 3/4 26.16 12.62 4.00 1.00 1.56 2.81 2.12 1.38 297627 10-S-2 10 7/8 45.75 16.75 4.50 1.50 1.75 3.38 3.50 1.75 297823 15-S-2 15 1 62.75 17.12 5.00 1.50 1.75 3.38 3.50 1.75 298127 25-S-2 25 - 140.00 20.75 6.00 2.00 2.00 4.62 3.69 2.38 298225 35-S-2 35 - 155.00 20.75 6.50 2.00 2.00 4.62 3.69 2.38 298323 45-S-2 45 - 235.00 25.25 7.00 2.25 2.50 5.00 4.00 3.00 Dimensions (in) IMPORTANT Contact the wire rope manufacturer for the proper wire rope to be used with Crosby Swivels. SPECIFICATIONS Wire Rope Size (in) Working Load Limit (ton*) 164

C G H J K N O Q R S T 297048 3-S-4 3 1/2 9.00 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25 297244 5-S-4 5 5/8 12.33 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25 297440 8-S-4 8-1/2 3/4 29.00 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50 297645 10-S-4 10 7/8 44.00 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88 297841 15-S-4 15 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12 298145 25-S-4 25 - 135.00 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38 298243 35-S-4 35 - 150.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38 298341 45-S-4 45 - 225.00 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00 D G Q R S T 297057 3-S-5 3 1/2 8.50 9.41 2.75 .75 1.03 1.12 1.25 297253 5-S-5 5 5/8 11.30 9.81 3.00 1.00 1.28 1.25 1.25 297459 8-S-5 8-1/2 3/4 29.25 11.88 4.00 1.25 1.41 1.62 1.50 297654 10-S-5 10 7/8 42.00 15.50 4.50 1.69 1.69 2.75 1.88 297850 15-S-5 15 1 49.00 16.38 5.00 1.94 2.03 2.75 2.12 298154 25-S-5 25 - 130.00 22.25 6.00 2.25 2.31 3.88 2.38 298252 35-S-5 35 - 145.00 22.25 6.50 2.25 2.31 3.88 2.38 298350 45-S-5 45 - 215.00 26.50 7.00 2.50 2.53 4.00 3.00 E F G L M P Q R S T V 297066 3-S-6 3 1/2 9.32 11.50 4.84 2.75 1.53 1.41 1.44 .75 1.03 1.12 1.25 1.12 297262 5-S-6 5 5/8 14.24 13.09 6.28 3.00 1.94 1.69 1.81 1.00 1.28 1.25 1.25 1.44 297468 8-S-6 8-1/2 3/4 32.00 16.07 7.54 4.00 2.46 2.22 2.25 1.25 1.41 1.62 1.50 1.62 297663 10-S-6 10 7/8 45.50 19.12 8.34 4.50 2.59 2.41 2.59 1.69 1.69 2.75 1.88 1.94 297869 5-S-6 15 1 68.00 21.24 10.34 5.00 2.81 3.19 3.00 1.94 2.03 2.75 2.12 2.38 298163 25-S-6 25 - 135.00 27.53 13.62 6.00 3.44 3.62 3.66 2.25 2.31 3.88 2.38 3.00 298261 35-S-6 35 - 215.00 30.69 14.06 6.50 3.88 3.75 4.56 2.25 2.31 3.88 2.38 3.19 298369 45-S-6 45 - 270.00 35.69 15.44 7.00 4.75 4.25 5.06 2.50 2.53 4.00 3.00 3.25 Dimensions (in) Dimensions (in) Dimensions (in) Dimensions (in) * Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. S-4 Eye & Jaw S-5 Eye & Eye S-6 Eye & Hook SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SWIVELS Swivel # Swivel # Swivel # Item # Item # Item # Item # Working Load Limit (tons*) Working Load Limit (tons*) Working Load Limit (tons*) Working Load Limit (tons*) Wire Rope Size (in) Wire Rope Size (in) Wire Rope Size (in) Wire Rope Size (in) Weight (lbs) Weight (lbs) Weight (lbs) Weight (lbs) A B C D E F G H I 1016001 .45 1/8 .7 .88 .25 .25 .38 .41 4.32 2.86 .93 .73 1.50 1096325 1016010 .75 1/4 1.5 1.31 .38 .31 .44 .56 5.44 3.16 .97 .84 1.50 1096374 1016025 1.5 3/8 2.3 1.63 .50 .50 .69 .78 6.35 4.00 1.16 1.14 1.50 1096374 1016026 3.0 1/2 6.5 2.00 .75 .75 .94 1.19 8.69 4.84 1.41 1.44 2.50 1096374 1016040 5.0 5/8 12.9 2.50 .88 1.00 1.13 1.53 10.71 6.28 1.69 1.82 3.00 1096562 1016045 8.5 3/4 26.4 3.00 1.19 1.56 1.34 2.09 13.65 8.34 2.41 2.60 4.00 1096657 1016056 10 7/8 53.0 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 5.00 1096704 1016064 15 1 53.0 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 5.00 1096704 1016075 25 1-1/4 97.0 5.00 2.00 2.00 2.38 3.69 20.88 13.62 3.25 3.62 6.50 1090161 1016082 35 1-1/2 140.0 5.00 2.00 2.00 2.38 3.69 24.00 14.06 3.00 4.56 7.00 1090189 Deformation Indicator AA Replacement Latch Kit Stock # ANGULAR CONTACT BEARING SWIVELS SPECIFICATIONS AS-1 Jaw & Hook 165

SPECIFICATIONS AS-2 Jaw & Jaw AS-3 Jaw & Eye A B C D E F G H 1016103 .45 1/8 .4 .88 2.38 3.13 .38 .25 .25 .19 .41 1016114 .75 1/4 .9 1.31 3.56 4.44 .44 .31 .38 .22 .56 1016122 1.5 3/8 2.0 1.63 4.06 5.44 .69 .50 .50 .28 .78 1016131 3.0 1/2 4.9 2.00 6.25 8.13 .94 .75 .75 .38 1.19 1016139 5.0 5/8 9.6 2.50 7.75 10.63 1.13 1.00 .88 .53 1.53 1016148 8.5 3/4 15.8 3.00 9.63 12.31 1.34 1.56 1.19 .56 2.09 1016157 10 7/8 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50 1016166 15 1 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50 1016175 25 1-1/4 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69 1016184 35 1-1/2 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69 A B C D E F G H I J K L 1016205 .45 1/8 .3 .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .84 1016216 .75 1/4 .9 1.31 3.69 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88 1016224 1.5 3/8 1.9 1.63 4.19 5.44 .50 .28 .50 .69 .78 .50 .66 .63 1.38 1016232 3.0 1/2 4.6 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00 1016243 5.0 5/8 9.1 2.50 7.88 10.19 1.00 .53 .88 1.13 1.50 1.00 1.25 1.19 2.63 1016250 8.5 3/4 15.6 3.00 9.50 12.25 1.56 .56 1.25 1.34 2.09 1.25 1.41 1.50 3.13 1016259 10 7/8 39.0 4.00 13.75 17.31 1.75 .81 1.50 1.75 3.50 1.72 1.63 1.81 4.69 1016268 15 1 40.0 4.00 13.44 17.31 1.75 .81 1.50 1.75 3.50 2.00 2.00 2.13 4.69 1016277 25 1-1/4 78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25 1016286 35 1-1/2 78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.2 Working Load Limit (tons*) Wire Rope Size (in) Weight (lbs) Dimensions (in) Dimensions (in) ANGULAR CONTACT BEARING SWIVELS Item # Item # Working Load Limit (ton*) Wire Rope Size (in) Weight (lbs) AS-4 Eye & Jaw A B C D E F G H I J K L 1016306 .45 1/8 .3 .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .81 1016314 .75 1/4 .9 1.31 3.63 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88 1016325 1.5 3/8 1.9 1.63 4.19 5.50 .50 .28 .50 .69 .78 .50 .66 .63 1.34 1016332 3.0 1/2 4.6 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00 1016343 5.0 5/8 9.1 2.50 7.88 10.19 1.00 .53 .88 1.13 1.44 1.00 1.25 1.19 2.6 1016352 8.5 3/4 15.7 3.00 9.44 12.25 1.56 .56 1.19 1.34 2.09 1.25 1.41 1.50 3.13 1016361 10 7/8 39.0 4.00 14.13 17.75 1.75 .81 1.50 1.75 3.50 1.72 1.66 1.81 4.69 1016370 15 1 40.0 4.00 13.81 17.75 1.75 .81 1.50 1.75 3.50 2.00 2.03 2.13 4.69 1016375 25 1-1/4 75.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25 1016379 35 1-1/2 75.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25 * Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. Dimensions (in) SPECIFICATIONS A B C D E F G 1016409 .45 1/8 .3 .88 2.6 3.38 .38 .25 .25 .81 1016418 .75 1/4 .9 1.31 3.75 4.63 .44 .31 .38 .88 1016427 1.5 3/8 1.8 1.63 4.31 5.56 .63 .50 .66 1.34 1016436 3.0 1/2 4.3 2.00 6.13 8.13 1.00 .75 .91 2.00 1016445 5.0 5/8 8.6 2.50 7.75 10.63 1.19 1.00 1.25 2.63 1016454 8.5 3/4 15.4 3.00 9.31 12.31 1.50 1.25 1.41 3.13 1016463 10 7/8 37.0 4.00 13.88 17.50 1.81 1.72 1.63 4.69 1016472 15 1 39.0 4.00 13.25 17.5 2.13 2.00 2.13 4.69 1016481 25 1-1/4 72. 5.00 16.00 20.75 2.38 2.25 2.31 5.25 1016490 35 1-1/2 72.0 5.00 18.00 20.75 2.38 2.25 2.31 5.25 Dimensions (in) AS-5 Eye & Eye SPECIFICATIONS SPECIFICATIONS Item # Item # Working Load Limit (tons*) Working Load Limit (tons*) WireRope Size (in) Wire Rope Size (in) Weight (lbs) Weight (lbs) 166

A B C D E F G H 1016502 .45 1/8 .7 .88 4.36 2.86 .93 .25 .25 .73 .93 1.50 1096325 1016513 .75 1/4 1.5 1.31 5.56 3.16 .97 .38 .31 .84 .97 1.50 1096374 1016520 1.5 3/8 2.9 1.63 6.22 4.00 1.16 .66 .50 1.14 1.16 1.50 1096374 1016529 3.0 1/2 6.2 2.00 8.63 4.84 1.41 .91 .75 1.44 1.41 2.50 1096374 1016538 5.0 5/8 12.4 2.50 10.77 6.28 1.69 1.25 1.00 1.82 1.69 3.00 1096562 1016547 8.5 3/4 23.5 3.00 13.52 8.34 2.41 1.40 1.25 2.60 2.41 4.00 1096657 1016556 10 7/8 52.0 4.00 18.08 10.34 3.19 1.66 1.72 3.00 3.19 5.00 1096704 1016565 15 1 53.0 4.00 17.64 10.34 3.19 2.03 2.00 3.00 3.19 5.00 1096704 1016574 25 1-1/4 94.0 5.00 20.88 13.62 2.25 2.34 2.25 3.62 3.25 6.50 1090161 1016583 35 1-1/2 138.0 5.00 24.00 14.06 3.00" 2.34 2.25 4.56 3.00 7.00 1090189 Deformation Indicator AA Replacement Latch Kit Stock # Dimensions (in) Dimensions (in) A B C D E F G 1016604 .45 1/8 .4 .88 2.38 3.13 .38 .25 .31 .40 1016611 .75 1/4 1.1 1.31 3.56 4.44 .44 .31 .38 .56 1016622 1.5 3/8 1.8 1.63 4.06 5.19 .56 .50 .44 .81 1016631 3.0 1/2 3.8 2.00 5.44 7.06 .81 .75 .63 .94 1016640 5.0 5/8 8.0 2.50 7.75 10.06 1.13 1.00 .88 1.56 1016649 8.5 3/4 14.5 3.00 9.88 12.38 1.25 1.31 1.00 2.13 1016652 10 7/8 40.0 4.00 13.13 16.75 1.75 1.75 1.50 3.25 1016658 15 1 40.0 4.00 13.13 16.75 1.75 1.75 1.50 3.25 1016662 25 1-1/4 84.0 5.00 15.94 20.75 2.38 2.00 2.00 3.69 1016667 35 1-1/2 84.0 5.00 15.94 20.75 2.38 2.00 2.00 3.69 Item # Item # Item # Item # Item # AS-6 Eye & Hook AS-7 Bullet Style Jaw & Jaw SPECIFICATIONS SPECIFICATIONS ANGULAR CONTACT BEARING SWIVELS AS-11 Thimble & Jaw Dimensions (in) Dimensions (in) A B C D E F G 1017020 8.5 3/4 18.0 3.00 8.66 13.00 1.34 1.56 1.19 2.09 1017029 15 1 42.0 4.00 11.66 17.53 1.75 1.78 1.50 3.50 A B C D E F G 1017225 8.5 t 3/4 20.0 3.00 9.00 13.25 1.25 1.31 1.00 2.13 1017258 15 1 40.0 4.00 11.50 17.38 1.75 1.75 1.50 3.25 1017261 25 1-1/4 81.0 4.00 14.31 21.19 2.38 2.00 2.00 3.69 AS-14 Thimble & Bullet SPECIFICATIONS SPECIFICATIONS Dimensions (in) A B C D E F G 8013342 8.5 3/4 14.5 3.00 10.13 12.63 1.25 1.31 1.00 2.13 8013343 15 1 40.0 4.00 13.50 17.00 1.75 1.75 1.50 3.25 8013376 25 1-1/4 84.0 5.00 16.16 20.92 2.38 2.00 2.00 3.69 8013344 35 1-1/2 84.0 5.00 16.16 20.92 2.38 2.00 2.00 2.75 8013385 45 - 150.0 6.00 20.25 26.25 3.00 2.53 2.25 2.75 Working Load Limit (tons*) Working Load Limit (tons*) Working Load Limit (tons*) Working Load Limit (tons*) Working Load Limit (tons*) Wire Rope Size (in) Wire Rope Size (in) Wire Rope Size (in) Wire Rope Size (in) Wire Rope Size (in) Weight (lbs) Weight (lbs) Weight (lbs) Weight (lbs) Weight (lbs) * Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit. AS-17 Bullet Style Jaw & Jaw Slurry Swivel SPECIFICATIONS 167

HVAC

CONSTRUCTION HEATERS PORTABLE AIR CONDITIONERS • The ExtraCooler® unit is the ideal solution for almost any cooling crises or need. • HVAC systems fail creating a need for emergency cooling • Temporary cooling is needed when primary systems require maintenance. • Supplemental or after-hours cooling is needed for IT, or key areas. • Cooling is needed in factories to increase productivity. • As a portable military grade air conditioning unit, the versatility of the ExtraCooler® is indispensable. • Our portable A/C units are easily disconnected and moved to other areas, with no alteration to your building Item # SCT42CB Cooling Capacity, BTU/Hr1 41,000 Power Supply2 Volts/Phase/Amps 208-230/1/30 Thermostat Control Digital Metering Device TX Value Power Consumption - Cooling, Watts 4,500 Current Consumption - Cooling, Amps 19.7 Recommended Circuit Amps 30 NEMA Plug Type 6-30P Evaporator CFM, Free Discharge 1,200 Condenser CFM 1,500 Maximum ESP, in WC 0.10 Hot Air Duct Diameter (inches) 14" Maximum Duct Length, ft. 40 Condensate Removal 5 gal. tank Condensate-Pump Head, ft. 15 Operating Limits, (min-max) ºF 65-105 Sound level, dB 67 R-410-A Charge oz. 70 Dim. / Weight L 30" W 28" H 51" / 336 lbs Flexible Cooling Solutions – 3.5 Ton 1200 to 1600 sq. ft. SPECIFICATIONS 169 BOSS™ 400,000 & 1,000,000 BTU/HR Direct Fired Heaters Item # 400 DF 1000 DF BTU/H Rating 400,000 1,000,000 Blower Fan Output (CFM) 2,500 5,000 Heat Type Direct Fired* Direct Fired* Fuel Type Dual Fuel – LP/NG Dual Fuel – LP/NG Ignition Type Spark Spark Motor Horsepower 1/2 HP 1 HP Dimensions L 49-7/8" W 21.25" H 22.5" L 65" W 31" H 23.25" Weight 125.0 300.0 Built-In-Volt Meter Yes Yes Built-In-Thermostat Yes Yes Vent Mode Yes Yes Ductable No No Omni Certified U.S./Canada ANSI Z83.7-2017 / CSA 2.14-2017 Push big heat into large, wide open job sites and warehouses with high CFM and 99% fuel efficiency SPECIFICATIONS

PIPE THREADING & FABRICATION

Nominal Pipe Size Nominal Pipe Size (Threads Per Inch) When using the OO-RB die head in the #700 power drive, the #770 adapter must also be used in conjunction. Item # 41935 Model # 700 Pipe Capacity 1/8"-2" Bolt Capacity 1/4" – 1" (using OO-RB Die Heads) Switch Double-throw reversible Switch has spring return to OFF position Die cast aluminum Gear Head Hardened steel spindle gear Spring-loaded adapter pawls Spur gear reduction face gear drive Material Cast aluminum Dimensions L 28-1/4" W 6-1/16" H 7-13/16" Weight 25 lbs Model 700 Hand-Held Power Drive Model 12-R Die Heads Machine Accessories Pipe Dies for Models OO-R, 11-R, 12-R, or O-R Die Heads SPECIFICATIONS ACCESSORIES 42620 774 Square Dr. Adapter (15/16") 42625 775 Support Arm for Model 700 Hand-Held Power Drive 10883 418 Oiler with 1 Gallion Premium Thread Cutting Oil 42600 770 Adapter for OO-R and OO-RB Item # Model # Description 700 POWER DRIVE & ACCESSORIES SPECIFICATIONS SPECIFICATIONS 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" National Pipe Taper (NPT) Alloy RH 37375 37380 37385 37390 37395 37400 37405 37410 37415 High-Speed LH 37435 37440 37445 37450 37455 37460 High-Speed RH 37465 37470 37475 37480 37485 37490 37495 37500 37505 High-Speed for Stainless Steel RH 37510 37515 37520 37525 37530 37535 37540 37545 37550 High-Speed for PVC RH 83450 83455 83460 83465 83470 83475 83480 83485 High-Speed for Plastic Coated Pipe 51857 51862 51867 51872 51877 51882 Alloy for IMC RH 92690 92695 92700 92705 92710 92715 National Pipe Straight Mechanical (NPSM) Alloy RH 37555 37560 37565 37570 37575 37580 37585 37590 37595 1/8"-27 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11-1/2 1-1/4"-11-1/2 1-1/2"-11-1/2 2"-11-1/2 National Pipe Taper (NPT) Alloy RH 37810 37815 37820 37825 37830 37835 37840 37845 37850 High-Speed RH 37855 37860 37865 37870 37875 37880 37885 37890 37895 High-Speed LH 37050 37055 38060 37065 37070 38075 38080 38085 H.S. For Stainless Steel RH 37900 37905 37910 37915 37920 37925 37930 37935 37940 H.S. For PVC RH 70685 70690 70695 70700 70705 70710 70715 HS Reversible RH 49707 49712 49717 49722 49727 National Pipe Straight Mechanical (NPSM) Alloy RH 37945 37950 37955 37960 37965 37970 37975 37980 37985 418 171

Nominal Pipe Size Rod Diameter (Threads Per Inch) Bolt Threaders Button Dies for Model OO-RB Ratchet Bolt Threaders 1" 700 POWER DRIVE & ACCESSORIES SPECIFICATIONS 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" Unified National Course 20 TPI 18 TPI 16 TPI 14 TPI 13 TP 12 TP 11 TPI 10 TPI 9 TPI 8 TPI Alloy RH 37610 37615 37620 37625 37630 37635 37640 37645 37650 37655 Alloy LH 37675 37695 Unified National Fine 28 TPI 24 TPI 24 TPI 20 TPI 20 TPI 18 TPI 18 TPI 16 TPI 14 TPI 14 TPI Alloy RH 37710 37715 37720 37725 37730 37735 37740 37745 37755 Alloy LH 37775 37780 37785 37790 37795 37800 37805 Unified National Course (UNC) 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 9/16"-12 5/8"-11 3/4"-10 7/8"-9 1"- 8 38335 38340 38345 38350 38355 38360 38365 38370 38375 38380 Unified National Fine (UNF) 1/4"-28 5/16"-24 3/8"-24 7/16"-20 1/2"-20 9/16"-18 5/8"-18 3/4"-16 7/8"-14 1"-12 38385 38390 38395 38400 38405 38410 38415 38420 38425 15317 Alloy RH Alloy RH Model OO-RB Die Heads SPECIFICATIONS 172

Item # Model # Description Weight 42360 1206 Stand for 300 Power Drive 31 lbs 42575 32 Transporter (for Power Drives and Tri-stand Vises) 14.5 lbs 68815 311 Carriage with No. 312 Lever 15 lbs 10883 418 Oiler with 1 Gallon of Nu-Clear Thread Cutting Oil 20.5 lbs 42365 341 Reamer for No. 311 Carriage 7 lbs 42370 360 Cutter for No. 311 Carriage 8.5 lbs 97065 811A Universal Q.O. Die Head Only, Right Hand Only 12.5 lbs 97075 815A Self Opening Die Head Only, Right Hand Only 13.5 lbs 51005 819 Nipple Chuck Complete, 1/2" - 2" 10.5 lbs 22638 1452 Removable Tool Tray 6 lbs 46660 E-863 LH/RH Reamer Cone 7 lbs Item # 15682 Model # 300 Complete Description 115V, 25-60 Hz NPT Spindle Speed 38 rpm Pipe Threading Capacity 1/8" – 2" Rod Threading Capacity 1/4" – 2" Geared Threader Capacity 6" Motor Type Reversible 1/2 HP universal motor Switch Heavy-duty forward / off / reverse and integral foot switch Chuck RIDGID speed chuck with replaceable rocker-action jaws Rear Centering Device Cam-action, turns with chuck Support Bar Heavy-duty Weight 218 lbs Item # 41855 Model # 300 Only 1/4" – 2" Rod Capacity 1/8" - 2" Pipe 2-1/2" - 4" with #141 4" - 6" with #161 Geared Threaders RPM 38 Voltage 115 V Frequency 50-60 Hz Phase 1 Motor Type Universal Power 1/2 HP Switch Heavy-duty forward / off / reverse and integral foot switch Chuck RIDGID speed chuck with replaceable rocker-action jaws Rear Centering Device Cam-action, turns with chuck Support Bar Two heavy-duty Weight 94 lbs Item # Model # Description Weight 10883 418 Oiler with 1 Gallon Premium Thread Cutting Oil 20.5 lbs 51005 819 Nipple Chuck Complete,1/2" - 2" NPT 10.5 lbs 97065 811A 1/8" – 2" NPT Die Head, Quick-Open RH 13 lbs 97075 815A 1/8" - 2" BSPT Die Head, Self-Opening RH 13 lbs 42360 1206 Stand 31 lbs 42365 341 Reamer Assembly 6.75 lbs 42370 360 Cutter Assembly 8.5 lbs 42385 312 Lever Carriage Feed Kit 3 lbs 42575 32 Transport Cart 14.25 lbs 46660 E-863 Reamer Cone LH & RH 7 lbs 68815 311 Carriage with Lever 15 lbs 97365 - Jaw Insert Set for Plastic Coated Pipe (Pack of 3) 0.5 lbs 22638 1452 Clip-On Tool Tray 6 lbs 68160 819 Nipple Chuck 1/2" - 2" BSPT 10.5 lbs 97070 811A 1/8" - 2" NPT Die Head, Self-Opening RH 12.5 lbs 97080 815A 1/8" - 2" BSPT Die Head, Self-Opening RH 13 lbs Model 300 Power Drive Model 300 Power Drive Complete SPECIFICATIONS SPECIFICATIONS ACCESSORIES ACCESSORIES 300 POWER THREADING MACHINES & ACCESSORIES 418 418 173

97065 811A Universal Q.O RH Yes Univ. 1/8"-2" 1/4"-2" * 12.5 lbs 97075 815A Universal S.O RH Yes Univ. 1/8"-2" 1/4"-2" * 13 lbs 84537 816 Universal S.A RH Yes Univ. 1/8"-3/4" * 13 lbs 84532 817 Universal S.A RH Yes Univ. 1"-2" * 13 lbs 23282 842 Universal Q.O LH Yes Univ. 1/8"-2" * 12.5 lbs 10491 555 555 Q.O RH Yes Dual/Bolt 1/8"-3/4" * 8 lbs Item # Model # How Opened Thread Direction Oil Thru Head Dies Used Pipe Cap. Bolt Cap. Used On Die Head Weight Description Machine NPT Die Heads 97045 531 Bolt Q.O RH/LH Yes 500B 1/4"-1" * 7.5 lbs 97050 532 Bolt Q.O RH/LH Yes 500B 1-1/8"-2" * 9 lbs 42047 500A Mono Q.O RH Yes Mono 1/8" * 6-3/4 lbs 42052 500A Mono Q.O RH Yes Mono 1/4" * 7 lbs 42057 500A Mono Q.O RH Yes Mono 3/8" * 7 lbs 42062 500A Mono Q.O RH Yes Mono 1/2" * 7-1/4 lbs 42067 500A Mono Q.O RH Yes Mono 3/4" * 7-1/4 lbs 42072 500A Mono Q.O RH Yes Mono 1" * 8 lbs 42077 500A Mono Q.O RH Yes Mono 1-1/4" * 8 lbs 42082 500A Mono Q.O RH Yes Mono 1-1/2" * 8-1/2 lbs 42087 500A Mono Q.O RH Yes Mono 2" * 8-1/2 lbs S.O - Self-Opening Q.O - Quick-Opening S.A - Semi-Automatic S.O - Self-Opening Q.O - Quick-Opening S.A - Semi-Automatic S.O - Self-Opening Q.O - Quick-Opening S.A - Semi-Automatic * 535-535A-1822 Machines and 300, 300 Compact and 300-A w/carriage. Model 535 Threading Machine Machine Bolt Die Heads Machine Mono Die Heads Model # Model # Item # Item # How Opened How Opened Thread Direction Thread Direction Oil Thru Head Oil Thru Head Dies Used Dies Used Pipe Cap. Pipe Cap. Bolt Cap. Bolt Cap. Used On Used On Weight Weight Die Head Description Die Head Description ACCESSORIES SPECIFICATIONS SPECIFICATIONS 535 THREADING MACHINE & ACCESSORIES Item # 535 Model # 96497 Description Hammer Chuck Machine Only (No Die Heads or Dies) Pipe Capacity 1/8" – 2", 2-1/2" – 4", 4" – 6" with 141 and 161 geared threaders Bolt Capacity 1/4" – 2" RPM 36 Voltage 115 V Frequency 50-60 Hz Phase 1 Motor Type Universal Amperage Draw 15A Power 1/2 HP Weight 111.1 lbs SPECIFICATIONS 174

Unified National Course (UNC) 8 UN Nominal Pipe Size (Threads Per Inch) Unified National Fine (UNF) 12 UN 16-32 mm - 1.5 40-63 mm - 1.5 1/2"-5/8" - 18 3/4"-1-1/4" - 16 Alloy RH 50645 50650 66700 66705 SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 535 THREADING MACHINE ACCESSORIES High-Speed RH Rod Size TPI High-Speed RH Rod Size TPI 48215 1/4" - 20 48295 1/4" - 28 48220 5/16" - 18 48225 3/8" - 16 48305 3/8" - 24 48230 7/16" - 14 48310 7/16" - 20 48235 1/2" - 13 48315 1/2" - 20 48240 9/16" - 12 48320 9/16" - 18 48245 5/8" - 11 48325 5/8" - 18 48250 3/4" - 10 48330 3/4" - 16 48255 7/8" - 9 48335 7/8" - 14 48260 1" - 8 48340 1" - 14NS * 48265 1-7/8" - 7 48375 1" - 12 48270 1-1/4" - 7 48345 1-1/8" - 12 48275 1-3/8" - 6 48350 1-1/4" - 12 48280 1-1/2" - 6 48355 1-3/8" - 12 48285 1-3/4" - 5 48360 1-1/2" - 12 48290 2" - 4-1/2 *NS = Non Standard High-Speed RH Rod Size TPI High-Speed RH Rod Size TPI 49215 1-1/8" - 8 49240 1-3/4" - 8 49220 1-1/4" - 8 49245 1-7/8" - 8 49225 1-3/8" - 8 49250 2" - 8 49230 1-1/2" - 8 High-Speed RH Rod Size TPI 49345 2" - 12 Pipe Dies for Universal Die Heads Pipe Dies for 500A Mono Die Heads Conduit Dies for Universal Die Heads Bolt Dies for Universal Die Heads Bolt Dies for 500B, 532 & 542 Die Heads 50785 50920 66710 SPECIFICATIONS Nominal Conduit Size (ISO) (Pitch in mm) Nominal Conduit Size (BEC) (Threads Per Inch) Nominal Pipe Size (Threads Per Inch) National Pipe Taper (NPT) National Pipe Straight Mechanical (NPSM) 1/8"- 1/4"-3/8"- 1/2"-3/4"- 1"-2"- 1/8"- 1/4"-3/8" 1/2"-3/4" 1"-2"- 27 18 14 11-1/2 27 -18 -14 11-1/2 Alloy RH 47735 47740 47745 47750 High-Speed RH 47755 47760 47765 47770 47845 47850 47855 47860 High-Speed LH 39587 47810 47815 47820 H.S. For Stainless Steel RH 47775 47780 47785 47790 H.S. For Cast Iron 70740 H.S. For PVC RH 70745 70750 H.S. For Plastic Coated Pipe RH 50012 31822 National Pipe Taper (NPT) 1/8" - 27 1/4" - 18 3/8" - 18 1/2" - 14 3/4" - 14 1" - 11-12 1-1/4"- 1-1/2" - 2" - 11-1/2 11-1/2 11-1/2 High-Speed RH 50700 50705 50710 50715 50720 50725 50730 50735 50740 H.S. For Stainless Steel RH 50745 50750 50755 50760 50765 50770 50775 50780 National Pipe Straight Mechanical (NPSM) High-Speed RH 50895 50900 50905 50910 50915 1-1/2"- 2-1/2" - 14 175

535 THREADING MACHINE ACCESSORIES Rebar Dies for 500B, 531 & 532, & 542 Die Heads Beveling Dies Cut Grooving Dies Bolt Dies for 500B, 531, 532, 541 & 542 Die Heads High-Speed RH High-Speed LH Rod Size (TPI) High-Speed RH Rod Size (TPI) For use with 531, 541 and 500B 1/4"-1" Die Heads For use with 532, 542 and 500B 1-1/8"-2" Die Heads 48605 1/4" - 20 48690 1/4" - 28 48610 48915 5/16" - 18 48695 5/16" - 24 48615 48920 3/8" - 16 48700 3/8" - 24 48620 48925 7/16" - 14 48705 7/16" - 20 48625 48930 1/2" - 13 48710 1/2" - 20 48630 48935 9/16" - 12 48715 9/16" - 18 48635 48940 5/8" - 11 48720 5/8" - 18 48640 48945 3/4" - 10 48725 3/4" - 16 48645 48950 7/8" - 9 48730 7/8" - 14 48650 48955 1" - 8 48735 1" - 12 48655 48960 1-1/8" - 7 49305 1" - 14NS 48660 48965 1-1/4" - 7 48740 1-1/8" - 12 48665 48970 1-3/8" - 6 48745 1-1/4" - 12 48670 48975 1-1/2" - 6 1-3/8" - 12 48675 1-3/4" - 5 48755 1-1/2" - 12 48680 48985 2" - 4-1/2 2" - 4-1/2 Unified National Corse (UNC) Unified National Fine (UNF) SPECIFICATIONS High-Speed RH Rebar Size (TPI) High-Speed RH Rebar Size (TPI) 34077 3/8" - 16 85850 1" - 8 34082 1/2" - 13 79120 1-1/8" - 7 34087 5/8" - 11 85855 1-3/8" - 6 34092 3/4" - 10 Unified National Corse (UNC) Unified National Fine (UNF) SPECIFICATIONS Item # Description Pipe Size Used in Die Head 52192 37-1/2º Bevel Die Set 1/2" - 3/4" 12-20 mm Universal 50960 37-1/2º Bevel Die Set 1" - 2" 25-50 mm Universal 52202 45º Bevel Die Set 1/2" - 3/4" 12-20 mm Universal 52965 45º Bevel Die Set 1" - 2" 25-50 mm Universal SPECIFICATIONS Item # Description Pipe Size Used in Die Head 52217 Grooving Die Set 1/2" - 3/4" 12-20 mm Universal 50985 Grooving Die Set 1" - 2" 25-50 mm Universal SPECIFICATIONS • For beveling pipe prior to welding • A set of beveling dies consists of three guide segments and one cutting segment • To cut groove pipe for mechanical type couplings 176

Note: Die Heads do not include dies. All Die Heads are through-head oiling. Item # Model # 26212 764 1/4"-4" Wheel-Type Cutter 26217 744 1/4"-4" Blade-Type Reamer 34577 1/4"-4" Blade-Type Reamer 26187 Jaw Insert and Roll Set for PE-Coated Pipe 51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 34157 419 Nipple Chuck 2-1/2" NPT 34162 419 Nipple Chuck 3" NPT 34167 419 Nipple Chuck 4" NPT 61122 840A Universal Drive Shaft 26707 Transmission Grease, 1 lbs Item # Model # Description Description Capacity Weight 26132 711 Universal Hand Dies, Self-Opening, RH 1/4" - 2" 12.2 lbs 26142 713 1/4" - 2" NPT 1224 Die Head, Quick-Opening, LH 1/4" - 2" 12.2 lbs 26152 714 Receding Hand Dies, Self-Opening, RH 2-1/2" - 4" 30 lbs 26162 541 1/4" - 1" Bolt 1224 Die Head, Quick-Opening, RH/LH 1/4" - 1" 7.5 lbs 26167 542 1-1/8" - 2" Bolt 1224 Die Head, Quick-Opening, RH/LH 1-1/8" - 2" 9.2 lbs 55447 725 2-1/2" - 4" Cut Grooving Die Head 2-1/4" - 4" 30 lbs 57452 766 Blade Type Cutter 3/4" - 4" 21 lbs 57502 4" Grooving Bit Only* 57492 4" Grooving Die Set* 2.2 lbs 57507 2-1/2" - 3-1/2" Grooving Bit Only* 57497 2-1/2" - 3-1/2" Grooving Die Set* 2-1/2" - 3-1/2" 2.2 lbs 58712 Tool Bit Model 1224 Threading Machine Die Heads for Model 1224 Accessories Pipe Dies for Model 1224 Threading Machine Pipe Dies for Use in Universal Die Heads (Models 504A, 811A, 815A, 816, 817, 865, 911 & 913) SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 1224 THREADING MACHINE & ACCESSORIES Nominal Pipe Size (Threads Per Inch) Size 1/8" - 27 1/4" - 3/8" - 18 1/2" - 3/4" - 14 1" - 2" - 11-1/2 High-Speed RH 47755 47760 47765 47770 H.S. For Stainless Steel RH 47775 47780 47785 47790 26192 High-Speed NPT Dies 2-1/2"- 4 31827 High-Speed NPT Dies for Plastic Pipe 2-1/2"- 4 32237 High-Speed NPT Dies for PVC 2-1/2"- 4 33057 High-Speed NPT Dies for Stainless Steel 2-1/2"- 4 33072 1224 45º Beveling Dies 2-1/2"- 4 33077 1224 37-1/2º Beveling Dies 2-1/2"- 4 44992 1224 Bevel Guide Set 2-1/2"- 4 44997 1224 37-1/2º Bevel Bit Only 45002 1224 45º Bevel Bit Only Item # Description Capacity SPECIFICATIONS Item # 1224 Catalog # 26092 Pipe Capacity 1/4" – 2" @ 36 rpm 2-1/2" - 4" @ 12 rpm 4" - 6" with 161 Geared Threader Bolt Capacity 1/4" – 2" Description 1/2" - 4" NPT Hammer Chuck Machine Die Heads 711 / 714 RPM 36 / 12 Voltage 120 V Frequency 60 Hz Phase 1 Motor Type Induction Amp Draw 151 Motor Control Reverse / off / forward, heavy-duty rotary type and integral foot switch Power 1-1/2" hp Chuck Hammer-type with replaceable rocker-action jaw inserts Rear Centering Device Cam action Oiling Pump Self-priming, gerator-type, automatic-reversing, constant-flow Oiling Method Thru die head Weight 509 lbs SPECIFICATIONS 177

TAPPING TOOL SPECIFICATIONS Tapping Tool • Easy to use: At only 21", this lightweight and compact tool is great for tight quarters and awkward locations. • Heavy-duty design: Sturdy machined, corrosion-resistant materials for dependable lifelong benefits. • Built-in bleed valve allows for easy purge of chips. • Independent cutter feed gives the operator total independent control of the cutter feed rotation for optimal saw life. • Taps a variety of materials including steel, cast iron, ductile iron and plastic pipe. • Versatility: The RT3422 is capable of tapping mains of water up to 500 psig and steam, air and natural gas up to 150 psig. • Coupon retaining bits: Exclusive pilot bits give you the confidence that the coupon will not be dropped in the pipe, preventing medium contamination or possible damage of down stream equipment. Item # RT3422 T-101b Capacity 3/4" – 2" 1/2" – 4" Saddle, Thread-o-let, Saddle, Thread-o-let, Mounting Weld-o-let®, Weld-o-let®, Welded Nipple Welded Nipple Cutter Travel 14" 18" Air ratchet, Air ratchet, Activation Hand ratchet, Hand ratchet, ` Right angle drill Right angle drill Cutter Feed Rotation of sleeve around an Rotation of sleeve around an Acme threaded barrel Acme threaded barrel Steam, air and Pressure natural Gas: 150 psig @ 370°F Water: 500 psig @ 100°F SPECIFICATIONS SPECIFICATIONS Item # 915 1-1/2", 2-1/2" – 3" Sch. 80 PVC 1-1/4" – 12" Sch. 10 Steel and Stainless Steel Pipe Capacity 1-1/4" – 6" Sch. 40 PVC 1-1/4" – 6" Sch. 40 Steel and Stainless Steel Pipe 2" – 8" K, L, M, DWV Cooper 1-1/4" – 1-1/2" Sch. 10 or 40 Steel or Stainless Steel Optional 2" – 8" Cooper Tube Type K, L, M, and DWV Groove Sets 4" – 6" Sch. 40 Steel or Stainless Steel 8" – 12" Sch. 10 Steel or Stainless Steel Actuation Feed screw with 1/2" ratchet wrench (included) Handle Cast-in carrying handle makes it easy to transport or lock up to prevent theft Included 2" – 6" Sch. 10 (2" – 3-1/2" Sch. 40) Roll Set, Ratchet Weight 23 lbs RIDGID® 915 Manual Roll Groover RIDGID® 975 Combo Roll Groover Item # 975 1-1/2" – 4" Schedule 80 PVC Pipe 1-1/4" – 2" Schedule 40 Stainless Steel Pipe Capacity 1-1/4" – 6" Schedule 10 1-1/4" – 6" Schedule 10 and Schedule 40 Steel, Aluminum, and PVC Pipe With Roll Change 2" – 8" Copper Tube (Type K, L, M, and DWV) Depth Adjustment Adjusting screw and integral, index depth gauge Actuation Feed screw with 1/2" ratchet wrench (included) or any 15/16" hex Power Drive Mounting RIDGID 300 Compact with Adapter 67662 RIDGID 300 Power Drive 38/57 rpm Included Ratchet Weight 26 lbs ROLL GROOVERS RT3422 178 The Maximum working pressure is 1,480 psi (100bar) at 100ºF (38ºC). Its operating temperatures are -20ºF (29C) to 700ºF (371ºC at 700 psi (48 bar) for intermittent service. The Maximum continuous rating is 350ºF (177ºC) at 1,025 psi (70 bar). T-101b

Item # 918-1 Catalog # 64977 Description Roll Grooving Machine Complete Voltage 115 Weight 185 lbs 1"- 12" Sch 10 Steel 1"- 8" Sch 40 Steel Capacity 2"- 6" Copper (types K, L, M & DWV) 1-1/2", 2-1/2" - 4" Sch 80 PVC Motor Universal 1/2 HP Motor Control On/Off Heavy-Duty w/ Foot Switch Speed 45 rpm No Load Item # Description Weight 48405 Roll Set for 8"-12" Sch 10 (8" Sch 40) with Carry Case 18 lbs 48407 Roll Set for 1-1/4"-1-1/2" Sch10/40 with Carry Case 10 lbs 48412 Roll Set for 1" Sch 10/40 and 1-1/4"-1-1/2" Sch 10/40 w/Carry Case 20 lbs 48417 Roll Set for 2"-6" Copper 10 lbs 59992 Roll Set for 1"-12" Stabilizer for Grooving Nipples 11 lbs 76822 Inch Diameter Tape 0.5 lbs 76827 Metric Diameter Tape 0.5 lbs Item# Description 36642 Footswitch, ASM. 48405 Roll Set for 8"-12" Sch 10 (8" Sch 40) with Carry Case 49217 Groove Roll 2" - 6" 51432 Drive Roll 2" - 6" 59992 1" - 12" Stabilizer for Grooving Nipples 64192 Stand, ASM 918-I 49087 T-Handle Hex Key, 1/8" 54317 Box Wrench 67192 Spanner Wrench 67197 Hex Key 3/8" 53987 Roll Storage Case 918-I Roll Groover SPECIFICATIONS STANDARD EQUIPMENT ACCESSORIES ROLL GROOVERS Item # Model # Description Weight 42575 32 #32 Transporter (for Power Drives and Tristand Vises) 14.25 lbs 76822 - Inch Diameter Tape 0.5 lbs 76827 - Metric Diameter Tape 0.5 lbs 96372 RJ624 RJ624 Large Diameter Pipe Stand 167 lbs 96982 - Drive & Groove Roll Set for 2"-8" Copper Tube Type K,L,M, & DMV 20 lbs 96987 - Drive & Groove Roll Set for 18"-20" Sch. 10 Steel or Stainless Steel 21 lbs 96992 - Drive & Groove Roll Set for 22"-24" Sch. 10 Steel or Stainless Steel 22 lbs 96997 - Drive & Groove Roll Set for 4"-6" Sch. 40 Steel or Stainless Steel 20 lbs Item # Description 42575 #32 Transporter (for Power Drives and Tristand Vises) 920 Training Video & User Manual 10843 Set of Rolls 2-6" 920 10848 Set of Rolls 8-12" 920 10853 Set of Rolls 14-16" 920 Item # 920 Catalog # 95782 Description 920 Roll Groover with 2" - 6" Sch. 40.8" - 12" Sch. 40 and 14" - 16" Std. Voltage 115 2" Wall Steel, Stainless Steel, Aluminum Capacity 2"-8" Sch 40 PVC 2-1/2"-4 Sch 80 PVC 2"-8" Copper (K, L, & M) 3"-8" Copper (DWV) Weight 199 lbs 920 Roll Groover SPECIFICATIONS STANDARD EQUIPMENT ACCESSORIES 179

Item # 258 258-XL Catalog # 50767 50227 Description Pipe Cutter Pipe Cutter Cutting Capacity 2-1/2" to 8" schedule 10*/40 steel pipe 8" to 12" schedule 10*/40 steel pipe Powered Model 700 Power Drive (not included) Model 700 Power Drive (not included) Power Drive RPM 26-30 (no load) 26-30 (no load) Weight 105 lbs (excludes Power Drive) 140 lbs (excludes No. 700 Power Drive) 258 & 258-XL Power Pipe Cutters SPECIFICATIONS STANDARD EQUIPMENT - 66687 Item # Catalog # Description Weight 8-1/2" H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/ pins, cover plate) 13 lbs E-258 50812 8-1/2" H-D Cutter Wheel only 2 lbs E258-T 58222 8-1/2" Thin Wall Cutter Wheel Only (PVC and Steel) 2 lbs - 54397 Transport Cart 24 lbs 258PS 60002 Ball Transfer Pipe Support 2-1/2" to 12" 21 lbs - 61757 Pipe Roller for Beveling (for Model 258 only) 13 lbs Accessories for 258 and 258-XL RIDGID® Pipe Saw Kit w/ 2 Clamps, 1" – 12" Capacity B-500 Pipe Beveler SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS *Use the thin wall cutter wheel for best results. Note: Model 258 is not recommended to cut cast iron pipe. For Optimum wheel life always properly support the work piece with ball transfer pipe supports. Item # 49298 Capacity 4" Pipe and Larger, Flat Plate Pipe Wall/Plate Thickness Min 0.188" Max 0.50" Bevel Angles 37.5º (Standard - Included) 30º and 45º (with Optional Cutter Heads) Cutter Head Rated for Most Steel & Stainless Steel* Weight 52.5 lbs Tool Weight Size 15.8" L x 11.5" W x 13.3" H Land Width 0"- 3/16" in approximately 1/32" increments Motor Type Universal Single Phase Motor Rating 1.2 HP, 115V, 50/60Hz Amps 13A (115V) Operating Speed (No Load): 950 RPM (115V) Body Steel Frame Standard Equipment Beveller, Manual Crank Handle, 37-1/2º Cutter Head, 6 – 4 Edged Inserts, Torque Driver, and Screws Item # 66398 Nominal Cutting Capacity Large Clamp: 6" to 12" Small Clamp: 1" to 6" Pipe Outside Diameter Large Clamp: 6.5" to 12.75" Small Clamp: 1.26" to 6.625" Minimum Cut-Off Length 1" (Pipe Saw Not For Facing Pipe End) Cut Quality (Max. Offset) 0.050" Cast Iron: Diamond Abrasive and 1/2" Max Wall Thickness Plastic: Carbide Tipped Blade and 0.070" Max Wall Thickness Pipe Material & Blade Guide Steel, Stainless Steel and Most Metal: Cermet-Tipped Blade and 1/2" Max Wall Thickness Saw Blade Type 8" Outside Diameter with 5/8" Round Arbor Motor Current: 15 Amp Power: 1800 W Voltage: 110V – 120V AC No Load Speed 3900 RPM Controls On/Off (I/O) Switch Model PC-106 1" – 6" Pipe Saw Clamp Includes Model PC-612 6" – 12" Pipe Saw Clamp Model PCS-500 Pipe Saw Accessories Saw Blade for Iron Pipe (69988), Saw Blade for Plastic Pipe (69053), Saw Blade for Steel and Stainless Steel (66413) 258 258-XL * Beveller cutting head and inserts are optimized for standard A53 mild steel pipe. Reduced insert life can be expected on other materials. PIPE BEVELER PIPE CUTTERS PIPE SAW 180

SPECIFICATIONS RIDGID® RP 340 Battery Press Tool Kit with ProPress® JAWS, 1/2" – 2" Capacity • More than 400 presses per charge using Advanced Lithium 4 Battery • Ability to switch between battery and AC power on the same tool • LED-light for continued operations in no or low-light environments • The only standard sized tool that offers a full line of jaws and rings compatible with: • 1/2" - 4" ProPress for cu & ss • 1/2" – 2" PureFlow for PEX • 1/2" – 2" MegaPress for steel Item # RP 340 Capacity 1/2" – 4" copper, steel and stainless steel 1/2" – 2" PEX Connection Flameless system connects pipe by press in less than 5 seconds. Works wet or dry. Hydraulic Ram Output 7,200 lbs Cycle Time ~4 seconds Head Rotation 270° Barrel/Jaw Swivel Service Interval 42,000 cycles Power 18V Advanced Lithium Ion Battery (400+ crimps per charge using) Operating Temp 15° F to 122° F Lighting Built-in LED light 1" Jaw for ProPress (76662) Includes 1/2" Jaw for ProPress (76652) 18V Advanced Lithium Ion Battery and Charger 3/4" Jaw for ProPress (76657) Tool Only: 7.3 lbs Weight Tool with Battery and 1/2" Jaws: 12.3 lbs Tool with Battery: 8.3 lbs PROPRESS® TOOLS SPECIFICATIONS RIDGID® Standard Series Jaws for ProPress System, 1/2" – 2" Capacity • Compatible only with RIDGID® Standard Series pressing tools, including the RP 340 Press Tool and ProPress System fittings. Item # 76652 76657 76662 76667 76672 76677 Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" for PorPress® Weight 4 lbs 4.25 lbs 4.5 lbs 4.75 lbs 6.5 lbs 10 lbs PROPRESS® TOOL ACCESSORIES SPECIFICATIONS Item # 48553 Capacity 1/2" to 2" black iron pipe For Use With RIDGID® Standard Press Tools (including our RP 340 Rental) Fitting Compatibility Viega MegaPress and MegaPress fittings Connection Pressed (can be made on a wet system) 1" MegaPress Jaw (37968) 1/2" MegaPress Jaw (37958) Includes 1-1/2" MegaPress Ring (37978) 1-1/4" MegaPress Ring (37973) 2" MegaPress Ring (37983) 3/4" MegaPress Jaw (37963) Weight 48.5 lbs RIDGID® MegaPress® Standard Jaw and Ring Kit for Black Iron Pipe, 1/2" – 2" Capacity 181

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Item # 60638 For Use With RIDGID® Standard Press Tools with Press Booster (RP 340, RP 330) Fitting Compatibility For use with MegaPress® XL and MegaPress® XL Stainless Fittings Capacity 2-1/2" to 4" Steel Connection Flameless system connects pipe in less than 25 seconds 2-1/2" Ring for MegaPress XL (60643) Includes 3" Ring for MegaPress XL (60648) 4" Ring for MegaPress XL (60653) Weight 52.5 lbs Item # 34403 Compatability Works with all RIDGID standard press tools (CT-400,320-E, RP 330-B and RP 330-C) Capacity 1-1/2" to 4" No Hub & Service Weight Soil Pipe Case Includes Operator's Manual Press Snap Cutter Item # 20483 Capacity 2-1/2" to 4" copper or stainless steel tube For Use With RIDGID® Standard Press Tools (including our RP 340 Rental) Fitting Compatibility ProPress XL-C Fittings Connection Pressed 2-1/2" XL-C Press Ring (20543) Includes 3" XL-C Press Ring (20548) 4" XL-C Press Ring (20553) V2 Press Ring Actuator (21878) Weight 40.5 lbs RIDGID® Standard Series ProPress® XL-C™ Ring and Actuator Kit for Copper and Stainless Steel, 2-1/2" – 4" Capacity RIDGID® Press Booster Kit for Use with Viega Megapress® XL Fittings, 2-1/2" – 4" Capacity RIDGID® Press Snap™ Soil Pipe Cutter Kit RIDGID® STRUTSLAYR® Strut Shear Head PROPRESS® TOOL ACCESSORIES Item # 64058 For Use With RIDGID 32kN press tools, including the RP 340 Material Compatability Strut Channel (Not for use with stainless steel strut) Cutting Capability Up to 12 ga 1-5/8" x 1-5/8" strut channel to the MFMA-4 Standard Up to 12 ga 1-5/8" x 13/16" strut channel to the MFMA-4 Standard Cut Squareness +/- 2° (strut must extend past strut support) 1-5/8" Die Shear 13/16" Die Shear Includes Case Strutslayr Head 182

BEVELING BAND A Whip B Crank Handle C Latch Handle D Set Screw Assembly E Torch Holder F Drive Wheels G 7/16" Cap Screws H Legs #206A Manual Beveling Crawler and 6" - 60" Beveling Bands SPECIFICATIONS The SMC Crawlers and Bands from Sawyer set the industry standard for large diameter pipe cutting and beveling. Ideal for cutting in tight spaces, the unique right angle drive attachment for this pipe beveling machine allows you to cut with only 6 inches of clearance in the bell hole, and the flexible stainless steel beveling bands on this pipe cutter adapt to any situation and permit the crawler to smoothly and consistently cut and bevel pipe. • Available for pipe sizes 6" and larger • Allow single-operator setup on pipes as large as 48 inches in diameter • Smooth, accurate cuts and bevels • Lightweight and adaptable to any beveling requirement Item # Description Dimensions Weight 206A-9 Beveling Crawler 23" x 23" x 12" 30 lbs with 9 ft Shaft 206C-6 6" Beveling Band 12" x 9" x 6" 6 lbs 206C-8 8" Beveling Band 14" x 10" x 10" 8 lbs 206C-10 10" Beveling Band 14" x 10" x 10" 10 lbs 206D-12 12" Beveling Band 18" x 18" x 10" 12 lbs 206D-14 14" Beveling Band 18" x 18" x 10" 14 lbs 206D-16 16" Beveling Band 18" x 18" x 10" 16 lbs 206D-18 18" Beveling Band 18" x 18" x 10" 18 lbs 206D-20 20" Beveling Band 23" x 23" x 10" 20 lbs 206D-22 22" Beveling Band 23" x 23" x 10" 22 lbs 206D-24 24" Beveling Band 23" x 23" x 10" 24 lbs 206D-26 26" Beveling Band 25" x 25" x 10" 26 lbs 206D-28 28" Beveling Band 31" x 31"x 10" 28 lbs 206D-30 30" Beveling Band 31" x 31"x 10" 30 lbs 206D-32 32" Beveling Band 31" x 31"x 10" 32 lbs 206D-34 34" Beveling Band 31" x 31"x 10" 34 lbs 206D-36 36" Beveling Band 37" x 37" x 10" 36 lbs 206D-38 38" Beveling Band 37" x 37" x 10" 38 lbs 206D-40 40" Beveling Band 37" x 37" x 10" 40 lbs 206D-42 42" Beveling Band 43" x 43" x 10" 42 lbs 206D-44 44" Beveling Band 43" x 43" x 10" 44 lbs 206D-46 46" Beveling Band 43" x 43" x 10" 46 lbs 206D-48 48" Beveling Band 49" x 49" x 10" 48 lbs 206D-50 50" Beveling Band 49" x 49" x 10" 50 lbs 206D-52 52" Beveling Band 49" x 49" x 10" 52 lbs 206D-54 54" Beveling Band 52" x 54" x 10" 54 lbs 206D-56 56" Beveling Band 54" x 56" x 10" 56 lbs 206D-58 58" Beveling Band 58" x 60" x 10" 58 lbs 206D-60 60" Beveling Band 62" x 64" x 10" 60 lbs 183

BEVELING BAND SPECIFICATIONS Standard Torch Beveling Machine D251 Double Chain Clamp Each H & M machine is constructed of durable, lightweight, hard-anodized aluminum for easy transportation to any job-site. It is used for cutting and beveling 2" to 36" pipe precisely, quickly and economically, even under the toughest conditions. • Ring gear and saddle are precisely machined and calibrated to ± .025 in concentricity and ± .015 in squareness. • H & M’s unique “split horseshoe” design permits easy placement over pipe sections. • A quick-operating boomer assembly securely locks the machine to the pipe for an entire 360-degree rotation. No re-positioning is ever needed! H & M’s Cuboid Spacer System keeps the spacers on the machine to minimize downtime. • H & M Pipe Beveling Machines save weld prep time and money compared to hand cutting. • With easy-to-follow manuals and a few minutes of instruction, any operator can easily make accurate cuts and bevels. • HOW FAST? For example, when using the No. 3 Standard Beveling Machine, a 20" pipe can be cut and beveled in about four minutes! Item # Standard Pipe Sizes Weight No. 0 2", 2.5", 3" and 4" 9.5 lbs No. 1 3", 4", 6" and 8" 18 lbs No. 2 6", 7", 8", 10" and 12" 27 lbs No. 3 12", 14", 16", 18" and 20" 55 lbs No. 4 20", 22", 24" and 26" 81 lbs No. 30 24", 26", 28" and 30" 92 lbs No. 5 30", 32", 34" and 36" 145 lbs Item # D251-1048 Number of Main Blocks 1 Number of Jackbars 9 Pipe Range 10" – 48" Pipe Tensile Strength 1 (Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch) Material Type 12 • (2) Nickel plated or stainless steel high-strength leaf chains • Extra heavy-duty stainless steel Jackbars (quantity as listed inspecifications) Includes • Double chain Main block with (2) Fine Adjustments • Level and Support Device (D251-1060 model and larger supplied with cable hoist) • Jackscrew Wrench • Parts and Operating Manual Weight 278 lbs The Mathey Dearman Double Chain Clamp is a heavy-duty vessel clamp designed for aligning and reforming pipes and vessels up to 20' (6 m) in diameter with Schedule 80 wall thickness. • Numerous jackbars provide clamping pressure exactly where needed for perfect alignment • Reforms and aligns pipe with Schedule 80 wall thickness • Fits extremely large range of pipe diameters • Jackbar pads pivot independently to handle uneven pipe and fitting surfaces • Joints on large pipe or tube shells up to 20' (6096 mm) in diameter can be aligned, reformed and welded without removing the clamp, saving time and improving weld quality. SPECIFICATIONS DOUBLE CHAIN CLAMP Includes Torch 184

ELECTRICIAN'S TOOLS

G3 Tugger® Cable Puller, 2,000 LB Capacity G6 Turbo™ Cable Puller 6,000 LB Capacity Item # G3 Applications Pulling 4/0 to 1,000 KCMIL cable Cable Type Electrical Cable Load Continuous Rating: 1,200 lbs Intermittent: 2,000 lbs High Speed: No Load @ 97 ft/min, 500 lb @ 59 ft/min, 1000 lb @ 36 ft/min Capacity Low Speed: No Load @ 41 ft/min, 1,000 lb @ 21 ft/min, 2,000 lb (Intermittent – 5 minutes on, 20 minutes off) @ 13 ft/min Voltage Rating 120 V Speed Pulling Rope: 1/2" Polyester (10,000 LB Minimum Breaking Strength) Mounting Boom Prime Mover Specification 1/2" double-braided composite rope (10,000 LB Average Breaking Strength) Item # G6 Continuous: 4,000 lbs (17.800 KN) Pulling Force Intermittent: 5,000 lbs (22.200 KN) Momentary: 6,000 lbs (26.700 KN) Rope Size 3/4" Double-Braided Composite, Rated at 26,000 lbs (115.600 kN) Motor 120 VAC, 50/60 Hz, 12 amps No Load Main High Speed: 28 ft/min Capstan Speed Low Speed: 11 ft/min No Load 2nd High Speed: 90 ft/min Capstan Speed Low Speed: 35 ft/min Includes Foot Switch, Force Indicator Standard Boom Extension 7.5 ft Weight 252 lbs SPECIFICATIONS SPECIFICATIONS UT10 Ultra Tugger® Cable Puller, 10,000 LB Capacity UT8 Ultra Tugger® Puller w/ Mobile Versa Boom, 8,000 LB Capacity SPECIFICATIONS SPECIFICATIONS Item # 6906 Applications Cable Pulling and Low Load Pulling 15 Minutes On/15 Minutes Off: 6,500-8,000 lbs (28.9-35.6 kN) Capacity Continuous Operation: 0-6,500 lbs (0-28.9 kN) Momentary: 8,000-10,000 lbs (35.6-44.5 kN) Item # 6806 Cable Type Electrical Cable Load 8,000 (35.8 kN) lbs pulling force Capacity 2,000 lbs @ 9 ft/min 8,000 lbs @ 6 ft/min Prime Mover Average Breaking Strength: 143 kN (32,000 lb) minimum Specification Required Rope: 7/8" diameter, double-braided, polyester composite Voltage Rating 115 V Amperage Rating 20 Amp Mounting Mobile Versi Boom CABLE PULLERS Cable Puller, 25,000 LB Capacity SPECIFICATIONS Item # 6810 Cable Sizes 8 x 250 MCM, 6 x 500 MCM, 5 x 750 MCM Maximum Traction Force All Cables: 800 lbs Single Cable: 200 lbs Speed 4 ft/min to 36 ft/min Voltage Rating 115V Dimensions / Weight L 41" H 27.5" W 37.5" / 285 lbs 186

Single Shoe Electric Conduit Bender, Includes 1/2" to 2" Rigid, EMT & IMC Shoes Mobile Bending Table SPECIFICATIONS SPECIFICATIONS • Simple switching between vertical and horizontal bending configurations • Digital pendant sets angle and monitors process • Solid state system eliminates arcing and prevents damage from temporary power • Absolute encoder stops bending at precise angles Item # 881-MBT Includes 4 Shoe Groups 2-1/2" One Shot 90° EMT, IMC, Rigid Shoe Group (27554) Shoe Groups 3-1/2" One Shot 90° EMT, IMC, Rigid Shoe Group (31281) 3" One Shot 90° EMT, IMC, Rigid Shoe Group (27555) 4" One Shot 90° EMT, IMC, Rigid Shoe Group (31274) Dimensions L 67" x W 31.5" x H 41" Height Without Pump: 35" Weight 1,326 lbs Item # 854DX Bender Type Electric Conduit Bender Voltage Rating 120 VAC Conduit Type EMT, IMC, PVC Coated Rigid w/ Optional Accessory, Rigid Conduit Size 1/2" to 2" Rigid, EMT and IMC Bend Radius 4.25" – 9" EMT, IMC Rigid for 1/2" – 2" Shoe Size Includes 1/2" – 2" Rigid, EMT and IMC Shoes, Digital Pendant, Roller Support Amperage Rating 20 AMP GFCI Protected Receptacle Standard C/US UL Listed Weight 550 lbs • Locking swivel wheels for maneuverability • Fork pockets to conveniently move the unit with a fork truck • Ram positioner to ease the setup of the ram to accommodate different size shoes • Steel pegs with hitch pins for storage of shoes and saddles • Carriage assembly to mount the 881 Bender unit directly to the MBT • Vice-chain to hold conduit securely for accurate bends, prevents conduit from twisting or turning during bend • Pump basket holds the hydraulic pump for the 881 bender unit G-Series Smart Pull Force Gauge SPECIFICATIONS Item # Smart Pull FG01 Power Supply Up to 5aH Makita Battery Pulling Force Up to 10,000 lbs Pulling Rope Up to 7/8" Diameter Double Braided Voltage Rating 18 V Onboard Memory 128 MB Accuracy +/- 2% Dimensions L 25.5" x H 9.5" x W 8" Weight 34.2 lbs without case, 52.2 lbs with case • The Greenlee FG01 G-Series Smart Pull is a cable puller accessory intended to monitor the force developed when cable is pulled into conduit. • Includes provisions for mounting of the Ultra Tugger® Cable Puller and the Ultra Tugger® boom and G6 Turbo® Puller. CABLE PULLING ACCESSORIES CONDUIT BENDERS Pulling Rope Available When Requested SPECIFICATIONS Item # 916600PR 9161200PR 34600PR 341200PR 78600PR 781200PR Size 9/16" 9/16" 3/4" 3/4" 7/8" 7/8" Length 600 ft 1200 ft 600 ft 1200 ft 600 ft 1200 ft 187

Classic Bender Power Unit, 1/2" to 2" Conduit & Pipe 1/2" to 2" EMT Shoe Group 1/2" to 2" Rigid/IMC Shoe Group 1/2" to 1-1/4" PVC-Coated Rigid Shoe Unit SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Item # 555C Bender Type Electric Conduit Bender Voltage Rating 120 VAC Conduit Type EMT, IMC, PVC Coated Rigid, Rigid Conduit Size 1/2" to 2" Rigid, EMT, IMC, PVC Coated Rigid Operating Temperature -5° to 120° F Relative Humidity 0-98% 1/2" – 1-1/4" Rigid PVC Bending Shoe (00573) Shoe Groups 1/2" – 2" EMT Single Shoe (23803) 1/2" – 2" Rigid Single Shoe (28008) Standard C/US UL Listed Weight 260 lbs Item # 00573 For Use With Greenlee® 555CX, 555DX and 555C Electric Conduit Benders Conduit Type 1/2" – 1-1/4" Rigid PVC Conduit • Simple relay controls for easy field repairs, and compact handle design to prevent interference with conduit when bending. • Lightweight, compact design for easy job-site mobility. • Bending shoe groups are available to accommodate the following types: • Electrical Metallic Tubing • Intermediate Metallic Conduit • Rigid Conduit • PVC-Coated Rigid Conduit • Schedule 40 Pipe Item # 23803 Application Conduit Bending For Use With Greenlee® 555C Electric Conduit Bender Conduit Capacity 1/2" – 2" EMT 1/2": 4-1/4" 3/4": 5-7/16" Centerline Bend 1": 6-15/16" Radius 1-1/4": 8-3/4" 1-1/2": 8-1/4" 2": 9" Item # 28008 Application Conduit Bending For Use With Greenlee® 555CX, 555DX and 555C Electric Conduit Benders Conduit Capacity 1/2" – 2" Rigid 1/2": 4-1/4" 3/4": 5-7/16" Centerline Bend 1": 6-15/16" Radius 1-1/4": 8-3/4" 1-1/2": 8-1/4" 2": 9" CONDUIT BENDERS 188

189 Item # Catalog # Description Weight 816 84537 1/8" - 3/4" Semi-Automatic Die Head 13 lbs 531 97045 1/4" -1" Bolt Die Head Quick-Open R.H./L.H. 7.5 lbs 532 97050 1-1/8" -2" Bolt Die Head Quick-Open R.H./L.H. 9 lbs 811A 97065 NPT Die Head Quick-Open R.H. 13 lbs 815A 97075 815A 1/8" - 2" NPT Die Head, Self-Opening, R.H. 13 lbs 817 84532 1/2" - 2" Semi-Automatic Die Head 13 lbs 811A 97070 815A 1/8" - 2” NPT Die Head, Self-Opening, R.H. 12.5 lbs 815A 97080 815A 1/8" - 2" BSPT Self-Opening Die Head 13 lbs Item # Catalog # Description How Opened Thread Direction Oil Thru Head Dies Used Pipe Capacity Weight 42047 Mono Q.O. RH Yes Mono 1/8" 6.75 lbs 42052 Mono Q.O. RH Yes Mono 1/6" 7 lbs 42057 Mono Q.O. RH Yes Mono 3/8" 7 lbs 42062 Mono Q.O. RH Yes Mono 1/2" 7.25 lbs 500A 42067 Mono Q.O. RH Yes Mono 3/4" 7.25 lbs 42072 Mono Q.O. RH Yes Mono 1" 8 lbs 42077 Mono Q.O. RH Yes Mono 1-1/4" 8 lbs 42082 Mono Q.O. RH Yes Mono 1-1/2" 8.5 lbs 42087 Mono Q.O. RH Yes Mono 2" 8.5 lbs Item # Catalog # Description Weight 819 51005 Nipple Chuck Complete, 1/2" - 2" NPT 10.5 lbs - 67662 Adapter Bracket for 300 Compact 30 lbs 819 68160 Nipple Chuck, 1/2" - 2" BSPT 10.5 lbs Mounted Chain Vise Workhorse™ All-In-One Bending and Threading Workstation OVERALL WORKHORSE™ SPECIFICATIONS #300 COMPACT NPT DIE HEADS #300 COMPACT DIE HEADS #300 COMPACT ACCESSORIES 1/2" to 2" EMT SHOE GROUP SPECIFICATIONS 1/2" to 2" RIGID SHOE GROUP SPECIFICATIONS 1/2" to 1-1/4" PVC-COATED RIGID SHOE UNIT SPECIFICATIONS Item # WK100 Casters (2) 8" locking casters, (2) 8" swivel casters Storage Lockable, Open Bend check to measure conduit and verify 90-degree bends, cord wrap, Features document holder, fork pockets on 3 sides, pass-through holes for electrical cords, and stow-able pipe supports for use with bend check tray. Handle Ergonomic handle height reduces lower back strain (1) Mounted 467 Chain Vise (1) Mounted Greenlee® 555CX Electric Bender Includes (1) Mounted RIGID #300 Compact Threading Machine (3) Shoe groups for use with 555CX Electric Bender Dimensions L 74" x H 69" x D 32" Weight 1,120 lbs Pipe Capacity 1/8" – 2" Bolt Capacity 1/4" – 2" Motor Control Heavy-duty rotary forward/off/reverse and integral foot switch Chuck Hammer-type with replaceable, rocker-action jaw inserts Oiling System Though-the-head with integral oil reservoir and self-priming, constant-flow, gerotor pump Conduit Size & Type 1/2" to 2" Rigid, EMT, IMC, PVC Coated Voltage Rating 120 VAC Amperage Rating 20 AMP GFCI-protected receptable Includes Standard pendant Operating Temp -5° to 120° F Relative Humidity 0-98% Item # 28008 Conduit Capacity 1/2" – 2" Rigid Centerline 1/2": 4-1/4" 3/4": 5-7/16" 1": 6-15/16" Bend Radius 1-1/4": 8-3/4" 1-1/2": 8-1/4" 2": 9" Item # 23803 Conduit Capacity 1/2" – 2" EMT Centerline 1/2": 4-1/4" 3/4": 5-7/16" 1": 6-15/16" Bend Radius 1-1/4": 8-3/4" 1-1/2": 8-1/4" 2": 9" Item # 00573 Conduit Type 1/2" – 1-1/4" Rigid PVC Conduit BENDING AND THREADING STATION 555X® ELECTRIC BENDER SPECIFICATIONS #300 COMPACT THREADING MACHINE SPECIFICATIONS

Gator® 6 Ton Battery Powered Quad Point Crimper Gator® 12 Ton Battery Powered Indent Crimper Gator® Battery Powered 50mm Cable Cutter Gator® Inteli-PUNCH™ Battery Powered Hydraulic Knockout Driver and Case, 11 Ton Capacity SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Item # EK12IDLX11 Crimper Type Dieless Applications 12 Ton Crimping Crimping Capacity 1000 Kcmil (MCM) Cu & Al Crimping Force 24,000 lbs (106kN) Handle Pistol Style Battery 18V 4.0Ah Li-ion Rotation Crimping Head Rotates 350° Standard C/US UL Listed Dim./Weight 16-1/2" L x 14-1/2" H / 15 lbs Item # EK6FTLX11 Crimper Type Dieless Applications 6 Ton Crimping Crimping Capacity 750 Kcmil (MCM) Cu & AI Wire Size 6 AWG – 750 Kcmil Cu & AI Crimping Force 12,400 lbs (55 kN) Handle Pistol Style Battery 18V 4.0Ah Li-ion Rotation Crimping Head Rotates 350° Standard C/US UL Listed Length / Weight 14.875" / 11 lbs Item # LS100XB Applications For punching holes in mild steel, stainless steel, aluminum, brass, copper, fiberglass and plastics Capacity 4" conduit up to 10 ga mild steel 4" conduit up to 10 ga stainless steel Max Cycle Time 8 seconds Rotation 360° rotating head to easily punch at any angle Battery Makita® 18V Li-Ion (30 minute charge time) Includes Driver and case Item # ESG50LX11 Cutter Type Guillotine Applications Aluminum, Copper Cutting Edge Hard Metal, Aluminum Cutting Range 2" (50mm) Diameter Aluminum or Copper Cable Jaw Size 1.97" Handle Pistol Style Battery 18 V lithium ion (Li-ion) Rotation Cutting Head Rotates 350° Length 15.75" CRIMPERS CABLE CUTTER KNOCKOUT TOOL 190

MATERIAL HANDLING

Skip pans are designed as specialized material baskets with solid steel sides and a slope at on end. Skip pans are most commonly used for holding construction materials. Four top lift points and forklift pockets allow for ease of movement. • Designed to transport pallets of bricks safely to a work location via overhead crane with 4 point lifting lugs B A C • Two dump lugs opposite the sloped side • Stainless Steel data plate with individual serial numbers with RFID tracking • Meets or exceeds ASME B30.20 “Below-the-Hook Lifting Devices” • Design & Fabricated to ASME BTH-1 design standard • Proof Tested to 125% C B A • Expanded metal sides • Stainless steel data plate with individual serial numbers with RFID tracking • Meets or exceeds ASME B30.20 “Below-the-Hook Lifting Devices” • Painted yellow with durable enamel paint • Design and fabricated to ASME BTH-1 design standard • Proof tested to 125% C Item # SP-7939 SP-7250 Capacity 6,000 lbs A 4' 4' B 20" 20" Dimensions C 6' 8' D 8' 10' Weight 1800 lbs 2010 lbs Item # MB-3579 Capacity 6,000 lbs A 14' Dimensions B 4' C 2' Weight 1,972 lbs Item # BSC Capacity 4,409 lbs Inside Bin Outside Bin Dimensions A 50" 52" B 50" 55-1/2" C 54" 62" Weight 331 lbs Skip Pans Brick Handling Bin Material Basket SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS D B A SKIP PANS, BRICK HANDLING BIN & MATERIAL BASKET 192

Kit Set Kit / Set Roller Kit / Set Includes (All Kits Include Steel Cases) Weight Item # Item # Capacity Capacity Steel Case Kit Box KB-D1: 16" x 12.375" x 4.44" KRS-3-4S - 3 tons 0.75 tons (4) 0.75-SP Rollers, (2) 3-KH Handles 55 lbs - RS-3-45 3 tons 0.75 tons (4) 0.75-SP Rollers, (2) 3-KH Handles 52 lbs KRS-3-2S/2R - 3 tons 0.75 tons (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles 55 lbs KRS-3-4S RS-3-2S/2R 3 tons 0.75 tons (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles 52 lbs KRS-8-4S - 8 tons 2 tons (4) 2-SP Rollers, (2) 8-KH Handles 85 lbs - RS-8-4S 8 tons 2 tons (4) 2-SP Rollers, (2) 8-KH Handles 76 lbs KRS-8-2S/2R - 8 tons 2 tons (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 85 lbs - RS-8-2S/2R 8 tons 2 tons (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 76 lbs Kit Set Kit/Set Roller Kit/Set Includes (All Kits Include Steel Cases) Wgt Item # Item # Capacity Capacity Steel Case Kit Box KD-D2: 27.75" x 14.75" x 9.63" (lbs) KRS-15-SLP - 15 tons 3.75 tons (4) 3.75-SLP Rollers, (2) KDH48F Handles 203 - RS-15-SLP 15 tons 3.75 tons (4) 3.75-SLP Rollers, (2) H36F 36" Handles 156 KRS-15-SLD - 15 tons 3.75 tons (4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 203 - RS-15-SLD 15 tons 3.75 tons 4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) H36F 36" Handles 156 KRS-30-SLP - 30 tons 7.5 tons (4) 7.5-SLP Rollers, (2) KDH48F Handles 215 - RS-30-SLP 30 tons 7.5 tons (4) 7.5-SLP Rollers, (2) H48F 48" Handles 172 KRS-30-SLD - 30 tons 7.5 tons (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 215 - RS-30-SLD 30 tons 7.5 tons (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 172 KRS-40-SLP - 40 tons 10 tons (4) 10-SLP Rollers, (2) KDH48F Kit Size Handles 219 - RS-40-SLP 40 tons 10 tons (4) 10-SLP Rollers, (2) H48F 48" Handles 176 KRS-40-SLD - 40 tons 10 tons (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 219 - RS-40-SLD 40 tons 10 tons (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 176 KRS-60-SLP - 60 tons 15 tons (4) 15-SLP Rollers, (2) KDH48F Kit Size Handles 255 - RS-60-SLP 60 tons 15 tons (4) 15-SLP Rollers, (2) H48F 48" Handles 212 KRS-60-SLD - 60 tons 15 tons (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 259 - RS-60-SLD 60 tons 15 tons (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 216 KRS-60-SLP RS-120-SLP 120 tons 30 tons (4) 30-SLP Rollers, (2) H60F 60" Handles 542 - RS-120-SLD 120 tons 30 tons (4) 30-SLD Rollers, (2) P-2 Preload Pads, (2) H60F 60" Handles 540 KRS-60-SLD RS-200-SLP 200 tons 50 tons (4) 50-SLP Rollers, (2) H60F 60" Handles 834 - RS-200-SLD 200 tons 50 tons (4) 50-SLD Rollers, (4) P-2 Preload Pads, (2) H60F 60" Handles 848 Light Duty Series Machinery Rollers, 3 – 8 Tons • Riggers Kits and Sets Capacities: 3 and 8 Tons Heavy Duty Machinery Rollers, 15 – 200 Tons • Deluxe Kit Capacities: 15-60 Tons • Complete Set Capacities: 15-200 Tons SPECIFICATIONS SPECIFICATIONS LIGHT DUTY MACHINERY ROLLERS HEAVY DUTY MACHINERY ROLLERS 193

Item # Fits Fits Description Length Weight 3-KH FT 3 Ton Kits Nylon 2 Ton Kits One Part Handle 15" 3 lbs 8-KH FT 8 Ton Kits Nylon 4 Ton Kits One Part Handle 30" 6 lbs KDH48F FT 15 - 60 Ton Kits Nylon 8 - 24 Ton Kits One Part Handle 48" 12 lbs H36F FT 3.75 - 15 Ton Rollers Nylon 2 - 6 Ton Rollers One Part Handle 36" 10 lbs H48F FT 3.75 - 30 Ton Rollers Nylon 2 - 10 Ton Rollers One Part Handle 48" 12 lbs H60F FT 3.75 - 50 Ton Rollers Nylon 2 - 10 Ton Rollers One Part Handle 60" 25 lbs Swivel Locking with Diamond Steel Grid Swivel Locking with Smooth Steel Swivel Padded Swivel Smooth Rigid Padded Rigid with Steel Spikes Rigid with Smooth Steel Swivel Locking Padded SLP SLD SLS SP SS RP RD RS Heavy Duty Series Machinery Rollers, 0.75 – 50 Tons Steering Handles with Safety Grips SPECIFICATIONS SPECIFICATIONS HEAVY DUTY MACHINERY ROLLERS ACCESSORIES * Width dimension of top exceeds roller trame width **Height to topof spike Item # Capacity Top Style Height Width Length Weight Contact Rolls 3.75-SLP 3.75 tons* 5" 5-3/4" 10-1/2" 34 lbs 5 7.5-SLP 7.5 tons* 5-1/4" 5-3/4" 10-1/2" 38 lbs 4 10-SLP 10 tons* 5-1/4" 5-3/4" 10-1/2" 38 lbs 4 15-SLP 15 tons 5-1/8" 6-3/8" 12-3/4" 49 lbs 5 30-SLP 30 tons* 8" 8" 15" 122 lbs 5 50-SLP 50 tons* 8-15/16" 8" 21" 193 lbs 7 3.75-SLD 3.75 tons* 4-3/4" 5-3/4" 10-1/2" 34 lbs 5 7.5-SLD 7.5 tons* 5" 5-3/4" 10-1/2" 37 lbs 4 10-SLD 10 tons* 5" 5-3/4" 10-1/2" 37 lbs 4 15-SLD 15 tons 4-7/8" 6-3/8" 12-3/4" 49 lbs 5 30-SLD 30 tons 7-3/32" 8" 15" 118 lbs 5 50-SLD 50 tons 8-1/16" 8" 21" 189 lbs 7 3.75-SLS 3.75 tons* 4-5/8" 6" 10-1/2 35 lbs 5 7.5-SLS 7.5 tons* 4-7/8" 6" 10-1/2" 38 lbs 4 10-SLS 10 tons* 4-7/8" 6" 10-1/2" 38 lbs 4 15-SLS 15 tons 4-3/4" 6-3/8" 12-3/4" 50 lbs 5 30-SLS 30 tons 6-31/32" 8" 15" 119 lbs 5 50-SLS 50 tons 7-15/16" 8" 20-7/8" 191 lbs 7 .75-SP 0.75 ton 3-7/16" 3-5/8" 6-1/2" 9 lbs 5 2-SP 2 tons 3-15/16" 4-1/8" 6-1/2" 15 lbs 4 .75-SS 0.75 ton 3-1/16" 3-5/8" 6-1/2" 9 lbs 5 2-SS 2 tons 3-9/16" 4-1/8" 6-1/2" 15 lbs 4 .75-RP 0.75 ton 3-1/8" 3-5/8" 6-1/2" 9 lbs 5 2-RP 2 tons 3-5/8" 4-1/8" 6-1/2" 15 lbs 4 3.75-RP 3.75 tons* 4-3/16" 5-3/4" 10-1/2" 29 lbs 5 7.5-RP 7.5 tons* 4-7-16" 5-3/4" 10-1/2" 33 lbs 4 10-RP 10 tons* 4-7/16" 5-3/4" 10-1/2" 33 lbs 4 15-RP 15 tons* 4-5/16" 6-3/8" 12-3/4" 42 lbs 5 30-RP 30 tons* 6-3/4" 8" 15" 107 lbs 5 50-RP 50 tons* 7-3/4" 8" 21" 179 lbs 7 3.75-RD 3.75 tons* 4-1/16"** 5-5/8" 10-1/2" 29 lbs 5 7.5-RD 7.5 tons* 4-5-16"** 5-5/8" 10-1/2" 32 lbs 4 10-RD 10 tons* 4-5/16"** 5-5/8" 10-1/2" 32 lbs 4 15-RD 15 tons 4-3/32"** 6-3/8" 12-3/4" 38 lbs 5 30-RD 30 tons* 6-1/8"** 8" 15" 105 lbs 5 50-RD 50 tons* 7-1/8"** 8" 21" 176 lbs 7 .75-RS 0.75 ton 3-3/4" 3-5/8" 6-1/2" 8 lbs 5 2-RS 2 tons 3-1/4" 4-1/8" 6-1/2" 15 lbs 4 3.75-RS 3.75 tons* 3-11/16" 5-5/8" 10-1/2" 29 lbs 5 7.5-RS 7.5 tons* 3-15-16" 5-5/8" 10-1/2" 32 lbs 4 10-RS 10 tons* 3-15/16" 5-5/8" 10-1/2" 32 lbs 4 15-RS 15 tons 3-13/16" 6-3/8" 12-3/4" 43 lbs 5 30-RS 30 tons* 5-3/4" 8" 15" 105 lbs 5 50-RS 50 tons* 6-3/4" 8" 21" 176 lbs 7 194

Item # 2416 Height Max. (Forks Up) 16' 11-3/8" Height Max. (Forks Down) 15' 11-5/8" Lift Capacity 450 lbs Height Stowed 62.8" Length Stowed 23" Length Operating 48" Width Stowed 26.4" Width Operating 55.25" Winch Cranks Per Foot 8 Weight 243 lbs B A C D Item # 781062 For Use With R-250 25 ft Roust-A-Bout Description Allows the R-250 Roust-A-Bout to lift wider loads Capacity 1,000 lbs Ease of Use Takes minutes to attach and detach Dimensions / Weight A 37" B 73" C (Length) 68" / 33 lbs Item # 780301 780303 Description R-150 Roust-A-Bout R-250 Roust-A-Bout Capacity R-150 1,500 lbs R-250 1,500 lbs Max Height 15' 2-1/2" 25'-3/8" Weight 336 lbs 493 lbs A 79" 119" B 20" 30" C/D 12" 17.5" Base Dimension 40 x 40" 60 x 60" Accessories None R-250 Tee-Head Extension Bar Item # 784755 Each mast and carriage can have a factory installed Description gravity actuated brake, which holds loads in place should the cable go slack. 15' & 25' Roust-A-Bouts 16' Duct Hoist SPECIFICATIONS SPECIFICATIONS R-250 TEE-HEAD EXTENSION BAR CABLE STAY BRAKE SPECIFICATIONS 16' FORK EXTENSION SPECIFICATIONS PIPE CRADLE SPECIFICATIONS TRAY SPECIFICATIONS Item # 784695 Description Button operated fork extender and retractor Fork Extension Range 23.3" to 29.8" Weight Capacity Reduction 200 lbs (marked on extender) Item # 783705 Description Slide over forks for air hoist and other HVAC applications Quantity Packaged two per set Item # 784320 Description Steel tray slides onto forks Dimensions 24" x 28" ROUST-A-BOUT & DUCT HOIST 195

Lifting Magnet SPECIFICATIONS MATERIAL THICKNESS MAGSWITCH Item # 8100364 Nominal Max Breakaway Force 1*2* 2217 lbs Nominal Max Shear Force 1*2* 441 lbs Full Saturation Thickness 3* 0.750" Min. Thickness for De-Stack 1*2* 0.374" Magnetic Pole Footprint 8.78" x 2.80" Weight 20.5 lbs Material Thickness Chart for material thickness / maximum force in Product Rsources tab 1* Determined in laboratory environment on SAE1018 Steel with surface roughness 63 micro inches. Many factors contrribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment. 2* All data applies to unit with flat pole shoes. 3* Determined with SAE1018 Steel L = 0.750" 5* Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5: 1 for most applicatoins Depth 1.5" 1.9" 2.7" 3.0" 3.5" 4.76" 6.35" 9.53" 12.7" 19.05" Maximum Force 1*2*5* 231 lbs 324 lbs 474 lbs 563 lbs 684 lbs 957 lbs 1305 lbs 1769 lbs 2079 lbs 2217 lbs 196

Air Lifting Bags, 1.1 to 77 Ton Lifting Capacity Item # Capacity Maximum Length Width Thick Air Required Max Weight Lifting @116 psi Burst Pressure (tons) (A) (B) (C) (cu/ft) (psi) (lbs) B1A 1.1 2.7" 6" 6" 1.1" 0.18 464 1.38 22-888110G2 1.5 3.0" 6" 6" 3/4" - - 1.2 B3A 3.1 5.1" 9" 9" 1.1" 1.53 464 2.8 22-888120G2 3.5 3.5" 6" 12" 3/4" - - 2.3 22-888130G2 5.4 5.4" 10" 10" 3/4" - - 3.1 B6A 6.4 5.9" 12" 12" 1.1" 1.48 464 5.3 22-888135G2 8.2 6.4" 12" 12" 7/8" - - 5.5 B11A 10.8 7.0" 15" 15" 1.1" 3.04 464 8.8 22-888138G2 12.9 7.1" 12" 18" 7/8" - - 8.3 22-888140G2 13.7 8.1" 15" 15" 7/8" - - 8.8 B14A 14.2 8.6" 18" 18" 1.1" 5.37 464 11.6 22-888150G2 19.0 9.0" 15" 21" 7/8" - - 12.0 B22A 22.7 10.6" 22" 22" 1.1" 10.45 464 17.8 22-888160G2 25.6 10.8" 20" 20" 7/8" - - 15.9 B28A 27.7 11.8" 24" 24" 1.2" 14.7 464 24.6 22-888165G2 34.0 11.8" 20" 26" 7/8" - - 20.1 B35A 35.3 14.1" 27" 27" 1.2" 21.9 464 29.9 22-888170G2 38.0 13.0" 24" 24" 7/8" - - 22.0 22-888180G2 39.5 9.5" 15" 42" 7/8" - - 24.5 B46A 46.4 16.5" 31" 31" 1.2" 32.5 464 40.1 22-888190G2 52.7 15.3" 28" 28" 7/8" - - 30.0 B59A 58.8 17.7" 35" 35" 1.2" 46.8 464 49.6 22-888195G2 69.7 17.0" 32" 32" 1" -- - 45.2 B77A 77 20.5" 38" 38" 1.2" 53.1 464 55.8 22-888200G2 89.2 20.0" 37" 37" 1" - - 58.0 • Operate on standard shop air, up to 116 psi • All models feature 2-ply Kevlar® with neoprene • Light weight for easy set up • B22A - B77A items feature side holes for attaching bags together B22A 22 Ton Air Bag 22" x 22" BHB16A 16' Blue Hose BC3A Deadman Controller BHY16A 16' Yellow Hose BC1A Air Regulator B22A LIFTING BAGS SPECIFICATIONS 197

DRILLING & CUTTING

Gas Rail Saw SPECIFICATIONS ACCESSORIES Item # 0127601 0127611 04420 04415 04419 K1270 K1270 Trak-Blade™ Trak-Blade™ Trak-Blade™ Description Gas Powered Rail Saw 16" Hi-Performance 16" Cut-Off 14" Cut-Off Rail Saw w/ Large Clamp Zirconia Wheel Wheel SPECIFICATIONS Super Heavy-Duty Cutting Nibbler Item # K1270 Motor X-Torq 7.8 HP 7.25 in 2 cycle gas RPM 4700 max Arbor Size 1" Wheel Size 16" Dim. H 18.5" W 9.57" L 29.72" Weight 46.7 lbs Item # N1000-0 Cutting Capacities Mild Steel: 0.375" Stainless: 0.276" Aluminum: .05" Motor 2-Speed Cutting Speed Gear 1: 3.25 ft/min Gear 2: 5.25 ft/min Minimum Radius 16" Weight 32 lbs SAWS * When operating a compressor with pressure greater than 90 PSI, it is recommended to use a “service” unit with pressure regulator” in-line to prevent over-speeding the saw. Item # CS 536163-3 Power 6.5 hp No Load Speed 5700 rpm Max. Depth of Cut 20" Motor Specifications* 124 cfm @ 90 psi 6 bar No Load Torque 104 in/lbs Noise Level at 3 ft 88 dB(A) Weight w/ Bar & Chain 34 lbs Item # CSH 150 Saw Type Hand-Held Power H.P. 9.5 No Load Speed 3200 rpm Max Depth Cut 7" Max. Blade Capacity 18" CFM @ 100 psi 92 Drive Gearbox Weight 28 lbs Item # TS 420 Saw Type Hand-Held Fuel Capacity 24 oz Max. Spindle Speed 5,350 rpm Arbor Size 20 mm Maximum Wheel Size 14" Maximum Cutting Depth 4.9" Weight 21.2 lbs 20" Pneumatic Concrete Chain Saw SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS 18" Pneumatic Hand-Held Concrete Saw 14" Gas Powered Chop Saw See Associated Rail Drill on Next Page 199

Item # BCR 150/5MG Applications Ideal for horizontal drilling Motor 115 V, 3-Speed Gearing, 60 Hz Motor Power 2.6 HP, 2000 W Motor Housing Aluminum Wet/Dry Drilling Yes 3/8" – 5-1/8" Bit Range Dry Handheld Drilling in Masonry: 3/4" – 6-1/2" Rig Mounted Drilling in Concrete: 3/8" – 5-1/8" Wet Handheld Drilling in Concrete: 3/8" – 1-1/2" No Load Speed 900 / 2180 / 4290 rpm Spindle Threading 1-1/4" - 7 & 1/2" thread combo spindle 5/8" -11 thread adapter included Diameter 5" Capacity 1st Gear: 2-1/4" – 5-7/8" Gear Selection 2nd Gear: 1" – 2-3/8" 3rd Gear: 3/8" – 1-3/8" LED Overload Indicator Yes Digital Read-Out Option Yes Grip Type Mid-Handle Water Flow Indicator Yes Water Valve Protection Yes Dim. / Weight 17-1/2" x 12" x 4-1/2" / 16 lbs Lackmond® Beast/B+BTec Hand Held Core Drill SPECIFICATIONS DRILLS Cutter Size Decimal Equivalent 3/4" .7500 7/8" .8750 15/16" .9375 1" 1.0000 1-1/16" 1.0625 1-1/8" 1.1250 1-3/16" 1.3125 1-1/4" 1.2500 1-5/16" 1.3125 1-3/8" 1.3750 1-7/16" 1.4375 1-1/2" 1.5000 1-5/8" 1.6250 1-11/16" 1.6875 Black TiAIN Coated Carbide Tip Cutter Item # Cutter Item # 15324 18-15224 15328 18-15228 15330 18-15230 15332 18-15232 15334 18-15234 15336 18-15236 15338 18-15238 15340 18-15240 15342 18-15242 15344 18-15244 15346 18-15246 15348 18-15248 15352 18-15252 15354 18-15254 RailBoss™ Gas Powered Bonding Drill SPECIFICATIONS ACCESSORIES Item # RB30 Motor 2.5 HP Honda 4-Stroke with Oil Alert, No Mixing Gas RPM 150 Diameter Drills holes up to 11/16" diameter Capacity 70-155 LB rail Drill Speed No bog down drilling 7/8" to 1-1/2" diameters in fully heat-treated rail under 15 seconds using Trak-Star Twister™ Bits Handle Quill feed spindle and single stroke feed handle allows operator to stand when drilling Weight 45 lbs See Associated Rail Saw on Previous Page 200