Avire Catalogue E-Motive Portrait V04 (GB)

Product Catalogue

Displays

2

Table of Contents 4
5
Introduction to E-Motive® 8
Technology overview 12
Multimedia LCD iS2 16
Panorama Ultra-Wide Multimedia LCD 20
Picture LCD S1 22
Picture LCD R1 26
Dot Matrix 27
Hall Lanterns & Gongs 28
Encoders & Converters 30
Accessories 32
Fixtures 37
Software
Contacts

3

Introduction to Avire

AVIRE combines market leading brands (E-Motive, Janus, TL Jones and
Memco) in the elevator industry offering an extensive range of safety
and communications products. Avire products are installed in over 3
million buildings worldwide and our combined product portfolio
includes light curtains, electronic displays and emergency telephones.
With manufacturing locations in Singapore, Shanghai and the Czech
Republic, and sales offices in 13 locations across the globe, Avire is a
global brand with a local presence.
E-Motive products have been consistently redefining the industry since
their launch is 1993. From LCD Displays, Dot Matric displays through to
Elevator Positioning Systems and Lift Monitoring Software, our
comprehensive range of products provide the building owner with
choice, flexibility and an opportunity to truly differentiate their buildings.
E-Motive products are designed, developed and manufactured at our
Singapore research and development facility. Our teams work closely
with customers from concept to delivery, installation and ongoing
support to ensure our display solutions fully meet the building
requirements

4

LCD Technology - check with MB & Jiang
Overview

LCD Panel Type and Backlighting Solutions

LCD screens are typically based on the panel type and backlighting solutions. There
are three different panel type solutions available in the market: Twisted Nematic (TN),
In Plane Switching (IPS) and Vertical Alignment (VA). These options of panel types
provide different features, such as viewing angles, colour reproduction, response time
and contrast

TN Panels are the most established and are still the most popular technology as they
provide the shortest response times, offer high brightness, use less power and are
inexpensive to manufacture. Despite these advantages, it should be noted that colour
shift occurs at wider viewing angles and there is also a grey inversion effect when
viewing the picture from above or from the sides.

In comparison IPS Panels have noticeably improved colour reproduction and viewing
angles. The drawback is their difficulty to emphasise blacks, which in turn leads to
problems with the contrast. IPS Panels are also expensive and have not yet been
widely adopted by the market.

VA Panels, which are the panel types used in E-Motive® multimedia and picture LCD
products, combine the advantages of both TN and IPS. This solution offers good
viewing angles, improved blacks and excellent contrast.

5

Backlighting solutions, such as Electroluminescence popularity for large-format screens and this
(EL), Cold-Cathode Fluorescent lamp (CCFL) and technology is used in E-Motive® multimedia iS2 and
Light Emitting Diodes (LEDs), offer different types of ultra-wide Panorama. LED backlighting offers low
lighting solutions to the back of the panel. CCFL and electrical noise, a wider dimming range and a
LEDs are the main types of backlighting solutions for quicker stable light intensity.
LCD panels.
For backlighting solutions, one key factor is the
In the past, LED backlight has been typically used in lifespan, which is measured as Mean Time between
small-format screens, whereas CCFL has been used Failure (MTBF). This parameter is the time taken for
for large-format screens. CCFL provides an easy brightness to reduce from 100% to 50% of its
lighting solution for large areas and is driven by an original brightness. For small-format screens, typical
inverter. MTBF is about 10k-20k hours, whereas for large
screen formats, the MTBF is typically 50k hours.
More recently, LED backlighting has been gaining in

Network Technology

Infrastructure Building LAN networking utilises the existing LAN
infrastructure, the network devices and the cables
Dedicated LAN networks enable all client devices so there is no need for customers to purchase or
(i.e. LCD screens) to be connected to one central install new hardware. The main task is to work
configuration point via dedicated cable network. with the building (IT) consultant to set the correct
The cable network can be via either cat 5e/6 cable, network/hardware settings for the display units to
twisted-pair cable or optical fibre cable, which work within this building LAN network.
allows different types of communication
technology to be connected onto the LAN network.

6

Cat 5e/6
Cable
Twisted-Pair
Cable
Fibre Optic Cable

Communication Technology

High bit-rate data communication technologies VDSL2 was originally deployed for the traditional
can help to facilitate a large amount of multimedia telephone service as a way of delivering very
content or management data to be transferred high-speed internet access. This type of
between a configuration PC and client devices, technology is becoming popular as it requires only
such as display units within a network. Based on a simple pair of twisted-pair cables for
different conditions and constraints, different communication. The typical throughput can be as
communication technologies can be deployed high as hundreds of Mbps depending on the
using different transmission media. In most cases, distance of communication. Typically it allows a
a hybrid communication solution can be utilised, data communication distance between 100m and
which is the most cost-effective solution. 1.4km between two network devices.

Ethernet communication is one of the most Optical communication can transmit data at a
common data communication technologies distance of up to 2km for multi-mode, and more
available in the market. It uses cat5e/6 cable to than 2km for single-mode, through the conversion
achieve data communication bandwidth of of data into optical form.
10Mbps/100Mbps/1000Mbps or higher. The
distance of travel for this technology is usually Due to the ease of installation, multi-mode fibre
limited to less than 100m, which can be further optic technology is more commonly used than
extended through a repeater, such as a router or single-mode. By using this media, a data
switch. communication bandwidth of 10Mbps/100Mbps/
1000Mbps can be achieved with greater ease;
Very High Speed Digital Subscriber Line 2 (VDSL2) however, the cost of the cable and installation is
is an access communication technology that much higher than ethernet and VDSL2
exploits the existing infrastructure of copper wires. communication.

7

LCD

Multimedia Key Features
LCD iS2
++ Energy saving and eco-friendly with
The first to integrate intuitive live web-feed capabilities, LED backlight technology, screen power
seamless wireless connection and eco-friendly features, management
the innovative iS2 takes your elevator experience to a
new level. ++ RSS feed, various enhanced graphics and
content management
With enhanced graphics, the latest windows 7 OS and all-
rounded full colour multimedia TFT LCD display, the ++ Wireless connection for content
market’s new product is the ultimate solution of updating, monitoring and diagnostics
intelligence.
++ One unit supports both landscape and
Remote access to monitoring and content functions is portrait mode
now effortless, while energy saving features like screen
brightness dimming effects, LED backlit technology and a ++ Extended product lifetime due to
screen power scheduler pave the way to a generation of reliable system components
thoughtful technology.
++ Well-designed heat-dissipation system
The screen layouts are easy to configure using E-Motive
LCD software and the screens are available in a wide ++ Brilliant 16M colours of media integration
range of sizes at 10.4”, 12.1”, 15, 19” and 21.5”. and elevator Information

++ Video/Audio live-streaming with local
video playback capability

++ Floor level synchronized tenant content

++ Configurable both locally via USB and
remotely via network

++ Supports Mpeg 1/2/4 video

++ Supports plug and play media link
solutions

++ Supports multiple languages/font types

88 is there a better picture?

9

Screen Layouts

System Architecture

Cabling not supplied by Avire
1100

iS2 Specifications

Screen Size 10.4" 12.1" 15" 19" 21.5"
Model No. iS2-104 iS2-121 iS2-150 iS2-190 iS2-215
DISPLAY
LCD Display Type 1024 x 768 800 x 600 Thin Film Transistor (TFT) 1280 x 1024 1920 x 1080
Colour Depth 4:3 4:3 True Colour 5:4 16:9
Resolution 1024 x 768
Aspect Ratio 211 x 158 246 x 185 4:3 376 x 301 477 x 268
Viewing Area (W x H mm) +88/-88 304 x 228 +89/-89
Horizontal Viewing Angle (°) +89/-89 +89/-89
Vertical Viewing Angle (°) 500 +85/-85 300
Luminance (cd/m2) 1000:1 500 300 5000:1
Contrast Ratio 700:1 500 2000:1
ELECTRICAL & ENVIRONMENTAL 1.6 1000:1 3.1
Operating Voltage (VDC) 20 38
Typical Current Consumption (A) 121
Typical Power Consumption (W) 280 x 235 x 48 1.8 2.3 3.1 Open Frame:3
Operating Temperture (°C) 22 28 38 2527 x 338 x 40
MECHANICAL
Mounting Options 0 - 50 Main Module
278 x 202 x 32
Overall Dimensions (W x H x D mm) 290 x 240x 48 Flush Mount, Surface Mount2 Open Frame:3
357 x 290.5 x 48 435 x 380 x 40
COMMUNICATION & I/O INTERFACES Main Module
Signal Interface 278 x 202 x 32
Network Interface
I/O Interface E-Motive 4-Wire Serial4, RS485
Ethernet, RS 422, Wireless5
VGA, HDMI, USB, Audio Out

1 AC/DC switching power supply is included with this product
2 Additional fixture is required for surface mount
3 Open Frame and Main Module each uses a separate AC/DC switching power supply. Both are included in the scope of supply
4 E-Motive 4-Wire Serial is done via E-Motive Encoder which is sold separately
5 Wireless communication is done via USB WiFi adaptor (147-0-0-0053) which is sold separately

iS2 Accessories

Accessories Model No. Description
Included 146-0 230/110VAC 12VDC Switching Power Supply Unit
133-3 8 ohm Speaker
Optional - Installation Guide
133-C 5m VGA Cable (19” and 21.5" only)
OF iS2 Open Frame
134-P-A 6mm Polycarbonate Lens
ACC-VS Video Splitter, 300mm VGA Cable
133-C HDMI Cable
147, ML4019 Wi-Fi Adaptor/Network Router/Switch/Converter/Hub
VSERVER Video Server
ML4031 4-Input/1-Output 4-Wire Concentrator

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

11

LCD

Panorama Key Features
Multimedia
Ultra-Wide LCD ++ Ultra-wide screen with high
brightness
A revolutionary next-generation elevator media display,
E-Motive® Panorama provides stunningly crisp, exciting visuals ++ High-quality TFT screen at viewing angle
for an informative entertainment elevator experience. of almost 180°

Panorama uses LED-backlit LCD displays with enhanced dynamic ++ One unit supports both landscape and
contrast and brilliant colour depth, to provide vivid-coloured portrait
images. The display has flexible and configurable software
allowing rich media broadcasting in 1/3 the size of a typical 16:9 ++ Fits elevator transom and
screen. car front return panel

With a unique ultra-wide aspect ratio that enhances building ++ Write-protected operating system
space, the Panorama provides greater flexibility for users to
design screen layouts. Panorama is available in 3 screen sizes at ++ Extended product lifetime through
19”, 28” and 38”. reliable system components

++ Well-designed heat-dissipation system

++ Brilliant 16M colours of media integration
and elevator information

++ Video/Audio live streaming or recorded

++ Floor-level synchronised tenant content

++ Configurable both locally via
USB and remotely via network

++ Supports Mpeg1/2/4 video

++ Supports plug and play Media link
solutions

++ Supports multiple languages/font types

1122

13

Screen Layouts

System Architecture

Cabling not supplied by Avire
1144

Panorama Specifications

Screen Size 19" 28" 38"
Model No. P2-190 P2-180 P2-380
DISPLAY
LCD Display Type 1680 x 342 Thin Film Transistor (TFT) 1920 x 502
Colour Depth 16.3 True Colour 16:4.2
Resolution 1366 x 256
Aspect Ratio 474 x 97 16.3 931 x 244
Viewing Area (W x H mm) +89/-89 698 x 131 +89/-89
Horizontal Viewing Angle (°) +88/-88
Vertical Viewing Angle (°) 2000:1 1400:1
Luminance (cd/m2) 1000
Contrast Ratio 2.9 2500:1 9.25
ELECTRICAL & ENVIRONMENTAL 35 111
Operating Voltage (VDC) 121
Typical Current Consumption (A) Open Frame: 497 x 165 x 65 3.2 Open Frame: 968 x 315 x 70
Typical Power Consumption (W) Main Module: 278 x 202 x 35 38 Main Module: 278 x 202 x 35
Operating Temperture (°C) 0 - 50
MECHANICAL
Mounting Options Flush Mount, Surface Mount2
Overall Dimensions (W x H x D mm)3 Open Frame: 741 x 215 x 58
Main Module: 278 x 202 x 35
COMMUNICATION & I/O INTERFACES
Signal Interface E-Motive 4-Wire Serial4, RS485
Network Interface Ethernet, RS 422, Wireless5
I/O Interface VGA, HDMI, USB, Audio Out

1 AC/DC switching power supply is included with this product
2 Additional fixture is required for surface mount
3 Open Frame and Main Module each uses a separate AC/DC switching power supply. Both are included in the scope of supply
4 E-Motive 4-Wire Serial is done via E-Motive Encoder which is sold separately

Panorama Accessories

Accessories Model No. Description
Included 146-0 230/110V AC/DC Switching Power Supply Unit
153-S USB Stereo Speaker
Optional - Installation Guide
OF P2 Open Frame
147 Video Splitter
134 6mm Polycarbonate Lens
147, ML4019 Network Router/Switch/Converter/Hub
VSERVER Video Server
ML4031 4-Input/1-Output 4-Wire Concentrator

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

15

LCD

Picture LCD S1 Key Features

E-Motive® S1 LCD is a full-colour display solution which is ++ Slim quality TFT screen
ideal for simple aesthetic appeal in elevator displays. The S1
can be used for static advertising content or special event ++ Supports both landscape and
promotions, and its slim profile makes it an ideal choice for portrait mode
surface-mount fixtures in modernisation projects. The S1 is
available in a range of sizes at 5.7”, 7”, 10.4”, 12.1" and 15" ++ Brilliant colours of media integration and
elevator information

++ Configurable both locally via
SD Card and remotely via network

++ USB content updating is available (S1 12.1”
and 15”)

++ Supports multiple languages

++ Supports direct interface to elevator
controller (S1 12.1” and 15”)

Screen Layouts

1166

System Architecture (5.7”, 7” and 10.4” only)

Cabling not supplied by Avire

System Architecture (12.1” and 15” only)

Cabling not supplied by Avire

17

S1 Specifications

Screen Size 3.5" 4.3" 5.7" 7" 10.4" 12.1" 15"
Model No. R1-035 R1-043 S1-057 S1-070 S1-104 S1-121 S1-150
DISPLAY
LCD Display Type Thin Film Transistor (TFT) 1024 x 768
Colour Depth 4:3
Resolution True Colour
Aspect Ratio 304 x 228
Viewing Area (W x H mm) 320 x 240 480 x 272 640 x 480 800 x 480 640 x 480 1024 x 7168 +80/-80
Horizontal Viewing Angle (°) N/A N/A 4:3 +80/-80
Vertical Viewing Angle (°) 4:3 ?? 4:3
Luminance (cd/m2) 71 x 53 95 x 54 246 x 185 400
Contrast Ratio +80/-80 +80/-80 116 x87 152 x91 216 x 162 +80/-80
ELECTRICAL & ENVIRONMENTAL +80/-80 +60/-80 +80/-80 122
Operating Voltage (VDC) +70/-70 +70/-70 +88/-88 0.83
Typical Current Consumption (A) 450 480 500 20
Typical Power Consumption (W) 500:1 900:1 +50/-50 +60/-70 +88/-88
Operating Temperture (°C) 357 x 289.5 x 40
MECHANICAL 220 350 500
Mounting Options E-Motive 4-Wire
Overall Dimensions (W x H x D mm)3 300:1 400:1 1500:1 Serial
COMMUNICATION & I/O INTERFACES
241 241 241 241 241 122 Ethernet
Signal Interface4 N/A
0.1 0.1 0.3 0.3 0.5 0.63
Network Interface
I/O Interface 2.4 2.4 8 8 12 15

0 - 50

Flush Mount, Surface Mount3

130 x 80 x 22.5 154 x 90 x 22.5 174 x 120 x 22 195 x 130 x 23 260 x 235 x 23 290 x 243 x 40

E-Motive 4-Wire E-Motive 4-Wire E-Motive 4-Wire E-Motive 4-Wire E-Motive 4-Wire E-Motive 4-Wire
Serial, RS485 Serial, RS485 Serial Serial Serial Serial, 8 Discrete

RS422 RS422 RS422 RS422 RS422 Inputs

Hall Lantern/Gong Hall Lantern/Gong Hall Lantern/Gong Hall Lantern/Gong Hall Lantern/Gong Ethernet

N/A

1 AC/DC switching power supply is not included with this product and can be ordered separately
2 AC/DC switching power supply is included with this product
3 Additional fixture is required for surface mount
4 E-Motive 4-Wire Serial is done via E-Motive Encoder which is sold separately

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

1188

19

LCD

Picture LCD R1 Key Features

A high-quality, compact sized full colour display, E-Motive® R1 is ++ Slim quality TFT screen
ideal as a position indicator display solution for residential
buildings, both inside the car and on the landing. The R1 is easy to ++ Supports both landscape and
install and maintain, and its ultra-slim design means that it will fit portrait mode
into tight spaces, offering a flexible yet enhanced viewing
experience. Available in 3.5” and 4.3” ++ Brilliant colours of media integration and
elevator information

++ Configurable locally via SD card upon
request

++ Supports multiple languages

Screen Layouts

2200

R1 Specifications

Screen Size 3.5" 4.3"
Model No. R1-035 R1-043
DISPLAY
LCD Display Type Thin Film Transistor (TFT)
Colour Depth True Colour
Resolution
Aspect Ratio 320 x 240 480 x 272
Viewing Area (W x H mm) N/A N/A
Horizontal Viewing Angle (°)
Vertical Viewing Angle (°) 71 x 53 95 x 54
Luminance (cd/m2) +80/-80 +80/-80
Contrast Ratio +80/-80 +60/-80
ELECTRICAL & ENVIRONMENTAL
Operating Voltage (VDC) 450 480
Typical Current Consumption (A) 500:1 900:1
Typical Power Consumption (W)
Operating Temperture (°C) 241 241
MECHANICAL 0.1 0.1
Mounting Options 2.4 2.4
Overall Dimensions (W x H x D mm)
COMMUNICATION & I/O INTERFACES 0 - 50
Signal Interface
Network Interface Flush Mount, Surface Mount2
I/O Interface
130 x 80 x 22.5 154 x 90 x 22.5

E-Motive 4-Wire Serial3, 12 Discrete Inputs
RS422

Hall Lantern/Gong

1 AC/DC switching power supply is not included with this product and can be ordered separately
2 Additional fixture is required for surface mount
3 E-Motive 4-Wire Serial is done via E-Motive Encoder which is sold separately

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

21

Dot Matrix

Dot Matrix

E-Motive® offers a wide range of dot matrix display formats for both horizontal and vertical
mounting. These products display arrows, floor position and programmed messages and are
available in both standard and slim profiles. The E-Motive dot matrix displays are often used for
surface-mount installation, making them an ideal solution for modernisation applications. Standard
diameter dot sizes are 1.8mm, 3mm and 5mm and the dots are red in colour.
The long format dot matrix display is an LED digital signage system designed for semi-outdoor
applications such as sports stadiums and train stations. With its large size (up to 1500mm) and high
brightness, this product is clearly visible from afar, making it ideal for high-profile installations. Along
with the ability to show static or scrolling text messages, the long format dot matrix display is also
able to interface to hall lanterns and gongs, indicating the direction of travel of an elevator.

Long Format Dot Matrix

Dot Matrix Model: 3008

CD3008 - Standard profile UD3008 - Slim Profile

2222

Dot Matrix Model: 1008

CD1008 - Standard profile UD1008 - Slim profile

Dot Matrix Model: 3010

CD3010 - Standard profile UD3010 - Slim profile

Dot Matrix Model: 1010

CD1010 - Standard profile UD1010 - Slim profile

23

Dot Matrix CD3001 - Standard profile
CD1001 - Standard profile
Dot Matrix Model: 3001 CD4006 - Standard profile
Dot Matrix Model: 1001 UD3006 - Slim profile
Dot Matrix Model: 4006
Dot Matrix Model: 3006

24

Dot Matrix Model: 4005

CD4005 - Standard profile UD4005 - Slim profile

Dot Matrix Model: 8003

CT8003 - Standard profile

Dot Matrix Specifications

Display Size (W 1.54" x 1.78" 1.78" x 1.54" 2.1" x 3" 3" x 2.1" 3.15" x 1.58" 3.54" x 1.54" 4.7" x 1.58" 5" x 2.5" 6" x 2.1" 11" x 1.58"
x H) CD 1010 CD 1008 CD 1001 CT 8003
CD 3010 CD 3008 UD 1010 CD 4006 CD 3001 CD 4005 UD 3006
Model No.
(Standard Profile) 5 3
RED1 RED1
Model No. UD 3010 UD 3008 7 x 10 UD 1008 UD 4005 16 x 32
(Slim Profile)
242 242
DISPLAY 0.2
0.064
Dot Size (mm) 3 3 5 1.8 3 1.8 5 1.8
RED1 RED1 RED1 RED1 RED1 RED1
Colour Depth RED1 RED1 7 x 10 16 x 32 7 x 20 16 x 48 7 x 20 16 x 112

No. of LED Dots 7 x 10 7 x 10
(rows x columns)

ELECTRICAL & ENVIRONMENTAL

Operating Voltage 242 242 242 242 242 242 242 242
(VDC) 0.064 0.135 0.087 0.1443 0.087 0.22

Typical Current 0.068 0.068
Consumption (A)

MECHANICAL

Mounting Options Flush Mount, Surface Mount4

COMMUNICATION & I/O INTERFACES

Signal Interface5 E-Motive 4-Wire Serial, 10 Discrete Inputs6 E-Motive
4-Wire Serial

Network Interface N/A
I/O Interface Hall Lantern/Gong

1 Other colours may be available upon request
2 AC/DC switching power supply is not included with this product and can be ordered separately
3 Current consumption for slim profile is 0.17A
4 Additional fixture is required for surface mount
5 E-Motive 4-Wire Serial is done via E-Motive Encoder which is sold separately
6 UD 4005 has no discrete inputs

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

25

Hall Lanterns & Gongs

Hall Lanterns & Gongs

E-Motive’s range of gongs and hall lanterns are fully compatible with our LCD and LED display products.
The gongs and hall lanterns provide an audio and visual indicator to announce elevator arrival and
intended direction of travel. These cost-effective, easy-to-fit solutions ensure that your elevator complies
with barrier-free accessibility codes and standards.

Jewel Hall Lantern (HL4000)

Key Features
+ U niquely shaped opaque, semi-translucent or in “glass effect” acrylic arrow
+ D ual colour illumination: green-light for up, red-light for down
+ 12mm arrow depth allowing 180˚ viewing angle
+ A vailable in 50mm and 70mm arrow height
+ D irect input trigger at 24VDC
+ M eets requirements of EN81-70 and ADA for landing signals
+ C an be used in combination with E-Motive LCD and Dot Matrix Products

Opaque Hall Lantern (HL4000)

Key Features
+ U niquely shaped opaque, milky white acrylic arrow with back box
+ 10mm arrow depth allowing 180˚ viewing angle
+ 70mm arrow height
+ D irect input trigger at 24VDC

Gong in Box (GONGBL) Slimline Gong (GONGSL)

2266 Gongs

Key Features
+ O ne sound for up, two sounds for down
+ Adjustable volume
+ A vailable in 2 design profiles
+ B ox design offers additional protection in PVC box,
+ S limline design easily fits into any fixture
+ Direct input trigger at 12-24VDC
+ M eets requirements of EN81-70 and ADA for landing signals
+ Can be used in combination with E-Motive LCD and Dot Matrix Products

The Slimline Gong is available in Serial version, used with E-Motive Encoder or
Converter, when direct input trigger is not available or to receive signal input trigger
from serial elevator controller.

Encoders & Converters

Encoders & Converters

E-Motive® has a range of Encoder and Converter products to read signals from the elevator controller and
encode these signals to provide elevator position and status information.

Encoder CX-BASIC CX-MP3

Key Features

+ 24 discrete inputs
+ USB/RS232 port for configuration via PC
+ Dipswitch for addressing setting
+ Stackable with CX-SYNCHRO Synchroniser for

additional 16 discrete inputs, date/time update
and synchronisation, and on-board configuration
with built-in LCD module
+ Stackable with CX-MP3 Voice Annunciator for
speech announcement

CX-SYNCHRO

Encoder CX7005

Key Features
+ 34 discrete inputs
+ D ate/time update and synchronization with on-board configuration
+ On-board diagnostic LED
+ RS232 port for configuration via PC
+ Dipswitch for addressing setting

Serial Encoder and Converter (CX/CONV)

Key Features
+ Supports various elevator controller protocols for SPI, CAN, RS485, RS422
+8 discrete inputs for external signals such as CCTV and telephone system is available upon
request

Picture shows a Converter for SPI protocol

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

27

Accessories

Accessories

The EPS and R1 Display kit combines the E-Motive R1 display with Key Features
the E-Motive Elevator Positioning system (EPS). This provides
a simple to install retro-fit LCD for elevators and eliminates the ++ Simple and quick to install
requirement to access the lift control circuits and the need for ++ No travelling cables required
travelling cables. ++ Operates and installs without the need

E-Motive R1 is a high-quality, compact sized full colour display to access the lift controller
which is ideal as a position indicator display solution for inside the ++ Full colour LCD
car and on the landing. The display has an ultra-slim design and is ++ Portrait or landscape orientation
available in 3.5” and 4.3” sizes.

The EPS is a sensor designed for use with display indicators to
show the current floor position and direction of travel. The sensor
is located on the top of car and a magnet is placed at each floor.
As the sensor passes the magnet it increases or decreases the
floor number depending on the direction of travel.

The EPS and R1 kit provides a stand-alone, quick to install and
cost effective solution for indicator replacement.

InputEfrleovmatoArllPaons?itioning System (EPS)
EPS is a sensor which is designed for use with display indicators to show
current floor and direction of travel. The system is quick and easy to install,
involving mounting a sensor on the elevator and placing a magnet at each
floor. As the sensor passes the magnet, it increases or decreases the floor
number depending on the direction of travel

Key Features

+ S tand-alone from controller board: no reliance on protocol compatibility
+ Indicates floor level and direction of travel
+ Q uick and easy to install
+ W orks for all elevator applications up to 8m per second and covers up to

32 floors
+ Low maintenance
+ T he sensor can be configured to output the floor setting in binary, Gray

code, or sequential output.

EPS Specifications

Input Max Distance Operating
Voltage between Magnet
Model No. Output Voltage Face and Sensor Case Outputs Connections IP Rating Temp. EMC Compliance
D100 001
24VDC Nominal. An Current 8mm 5 Bit floor output, transistor 9-core cable IP65 -10°C to +60°C Emissions to EN
input range of 12V – Maximum 1A drive to Vin with floating low terminated 12015:2004; Immunity
30VDC is acceptable for all outputs in boot laced to EN12016:2004
Separate Up and Down
combined outputs with transistor drive ferrules

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

28

Voice Annunciator (CX-MP3)

Key Features
+ S peech announcement of elevator position and status information
+ B ackground music inbetween speech announcements
+ m p3 format speech and music files
+ S upports multiple languages
+ C onfigurable locally via SD card
+ S peech duration not limited
+ A djustable volume
+ S peech audio bandwidth up to 16 kHz
+ S upports audio transmission distance up to 150m
+ 8 discrete inputs
+ A vailable in stackable version to work with Encoder CX-BASIC

Synchronizer (CX-SYNCRO/PX7017)

Key Features
+ P rovides date and time to displays
+ S ynchronises date and time for displays within a group of multiple elevators
+ Available in stackable version to work with Encoder CX-BASIC

Picture shows a CX-SYNCRO

Buzzer (BUZZ)

Key Features
+ 24VDC input trigger at V+, 0V and Push Feed
+ W orks only when elevator is in operation
+ A djustable volume
+ M eets requirements of EN81-70 for elevator call registration feedback

EPS Accessories

Model No. Description
D100 800 Pack of 7 magnets

EMD-135-0-1-0015 1 x 24VDC power supply

29

Fixtures

Fixtures Key Features

Fixture solutions are the latest addition to E-Motive's extensive ++ Stainless steel faceplate
range of LCD and LED display products. These fixtures are ++ Up to 25mm overall depth for slim-profile
available in both slim profile surface-mount and flush-mount
designs with a stainless steel finish. They provide a readily surface-mount
assembled solution for modernisation and new installation ++ 80mm box depth for flush mount
projects at landing and in car. ++ Available up to 1300mm height
++ Complements E-Motive displays and
Custom-made fixture material and design are also made
available upon request. accessories

30

Hall / Car Position Indicator HPI/CPI

Surface Mount Flush Mount

For more information, download our product
datasheet at www.emotivedisplay.com

31

Software

Software

LCD Configuration Software Key Features

Our LCD configuration software allows users to configure screen ++ C hoice of default screen layouts and
layouts on E-Motive LCDs iS2, P2, S1 and R1. selections from software library

This software enables configuration of the elevator position, ++ U ser-friendly multimedia content
status information, custom defined messages and screen configuration (picture content for
layouts. S1 and R1)

++ Multimedia content streaming
(iS2 and Panorama)

++ System date/time update and
synchronisation (iS2 and Panaroma)

NEW PICTURES?

S1 and R1 Software iS2 Software
P2 Software

32

Lift Monitoring System LMS Key Features

E-Motive® Lift Monitoring System (LMS) is designed to ++ Delivers real-time information on
encompass a broad spectrum of elevator monitoring elevator operations
requirements at a designated central location. The software
system is provided with a graphical user interface that allows ++ Allows immediate or scheduled control of
monitoring, controlling, reporting and analysis via a network. elevator parameters

++ D ata is collected, organised and stored
in a database for off-line reporting and
analysis

++ Windows-based interface for
ease of use

CHECK IMAGES

For more information, download our product datasheet at
www.avire-global.com/emotivedisplays

33

Notes

34

PA_09/03/2016

35

36