DGR Assessment extracts 2016.pub

2016 IATA DGR EXTRACTS
For Training and Assessment

IATA 57th Edition PAGE NUMBER 
Dangerous Goods Regulations 3&4
5
Reference Material 7-9
10 - 12
For training and assessment purposes only 13
14 - 18
CONTENT  19
Passenger and Crew allowances (Table 2.3.A) 20
Excepted Quan es (Table 2.6.A) 22 - 48
State Varia ons 50
Operator Varia ons 51
Classi?ca on Tables (Class 3, Class 6.1 & Class 8)
Blue Pages Extracts
Numerical Cross Reference list
Special provisions extract
Packing Instruc on extracts
Radioac ve Material Proper Shipping Names
Values for Common Radionuclides





EXCEPTED QUANTITIES -
SECTION 2.6 IATA DGR

STATE and OPERATOR VARIATIONS -
SECTION 2 IATA DGR

State Code
Australia AUG
Saudi Arabia SAG
Singapore SGG
South Africa ZAG

Operator Code
Cathay Pacific Airways CX
Emirates EK
ETIHAD Airways EY
Korean Airlines KE
Qantas Airways QF
Qatar Airways QR

STATE VARIATIONS  AUG-03  Infec ous substances other than human blood products, human urine and
human ssue, are prohibited from entry to Australia without prior approval from
  Australian Health Authori es.

AUG (Australia)  Requests for approval should be addressed to:
Australian Quaran ne and Inspec on Service
The Australian na onal authority for Annex 18 and competent authority for these Department of Agriculture, Fisheries and Forestry
Regula ons is the: GPO Box 858, Canberra ACT 2601
Civil Avia on Safety Authority (CASA) AUSTRALIA
GPO Box 2005, Canberra ACT 2601 Tel: +61 2 6272 3933, Fax: +61 (2) 6272 3933
AUSTRALIA Website: h p://www.aqis.gov.au
Tel: +61 131757, Fax: +61 2 6217 1300 (see 1.2.8, 3.6.2, 8.1.6.9.4, 8.3 and 9.1.2).
email: [email protected]
Website: www.casa.gov.au/dg/index.htm AUG-04 For the purposes of compliance with 9.6.3, no ?ca on of a dangerous goods inci-
dent is to be reported to the Civil Avia on Safety Authority (CASA) within two working
AUG-01  Dangerous goods requiring approval under Special Provisions A1 or A2 (see days. This no ?ca on is in addi on to, and not instead of, that required under Annex 13.
Subsec on 4.2, Column M) may only be carried on a passenger or cargo aircra in
Australian territory with the approval of the Civil Avia on Safety Authority (CASA). AUG-05  Where a package(s) of dangerous goods is permi ed by these Regula ons for
Applica ons for approval should be lodged with CASA at least ten days prior to the carriage on both a passenger and cargo aircra and the package(s) has a?xed the “Cargo
proposed ?ight (see 1.2.5, 8.1.6.9.4 and 8.3). Aircra Only” label in accordance with a State Varia on(s) (e.g. USG-02, USG-10, USG-13,
etc.) then the package(s) may be transported on both passenger and cargo aircra within
AUG-02 Import and/or export of radioac ve material to Australia. A permit is required to Australia beyond the ?rst port of unloading of the package(s) in Australia, but in these
import or export radioac ve materials and can be obtained on applica on to the circumstances the “Cargo Aircra Only” label must be removed. The “Cargo Aircra Only”
Australian Radia on Protec on and Nuclear Safety Agency (ARPANSA). There are two label may be removed by the operator, the shipper or an agent of the operator or shipper.
categories of import permit available; one applies to medical radioisotopes, the other to The shipper must provide the appropriate dangerous goods transport document with the
non-medical radioisotopes. It is prohibited to import radioac ve waste to Australia. package(s) and, where applicable, an air waybill (or consignment note), prepared in
accordance with these Regula ons for transport of the package on both a passenger and
Further informa on and applica ons forms are available on the ARPANSA web site at: cargo aircra within Australia. When following the provisions of AUG-05, the operator
h p://www.arpansa.gov.au must complete a dangerous goods acceptance check in accordance with 9.1.3 prior to
Applica ons and inquiries can be made to: further transport of the package(s) aboard an aircra within Australia.
Import/Export Permits O?cer - ARPANSA
PO Box 655, Miranda NSW 1490
AUSTRALIA
Tel: +61 2 9541 8333, Fax: +61 2 9541 8314
email: [email protected]

SAG (Saudi Arabia)  SGG (Singapore) 

SAG-01 The transport of alcoholic beverages for delivery to or through any des na on in SGG-01 In accordance with paragraph 50D of the Singapore Air Naviga on Order, air oper-
Saudi Arabia is forbidden (see 2.3.5.7). ators wishing to carry dangerous goods into, transi ng or out of Singapore must
obtain a dangerous goods permit from the Civil Avia on Authority of Singapore (CAAS).
SAG-02  The shipper of any dangerous goods by air shall provide a wri en undertaking to Informa on and applica on forms for dangerous goods permits may be obtained from the
re-ship the consignment, at the shipper's cost and risk, if the shipment is not cleared and CAAS website (www.caas.gov.sg). All applica ons are to be made on prescribed forms and
received by the consignee within 10 working days from the arrival of the consignment to addressed to:
any des na on in Saudi Arabia.
Dangerous Goods Unit
SAG-03 Name, address and telephone number of consignee must be wri en in full on the Airworthiness/Flight Opera ons Division
Air Waybill for dangerous goods to any des na on in Saudi Arabia. Civil Avia on Authority of Singapore
PO Box 1, Singapore Changi Airport
SAG-04 Prior permission is required from the concerned government departments for the SINGAPORE, 918141
importa on of the following: Tel: +65 6541 3487, Fax: +65 6545 6519
[email protected]
(a) Explosives and muni ons of war, which require further approval from:
SGG-02  Singapore Air Naviga on Order (ANO) de?nes muni ons of war (MOW) as
Presidency of Civil Avia on “weapons and ammuni on designed for use in warfare or against any person, including
Air Transport Department any part designed for such weapons and ammuni on”. MOW includes weapons (for
PO Box 887 spor ng and non-spor ng purposes) such as ri?es, pistols and guns, and weapon
Jeddah 21165 components and parts. MOWs may themselves contain or are loaded with explosives,
SAUDI ARABIA cartridges, charges, primers and ammuni ons which are classi?ed as dangerous goods in
accordance with these Regula ons.
(b) Chemical products except for perfumery products, cosme cs and dry ice.
Operators wishing to carry muni ons of war by air into, transi ng or out of Singapore
(c) Radioac ve material. The ?nal des na on of radioac ve material must be Jeddah, must obtain a MOW permit and a dangerous goods permit in accordance with paragraphs
Riyadh or Dammam only, except those for medical purposes, which may be imported to 50C and 50D of the Air Naviga on Order.
any point in Saudi Arabia.
Informa on and applica on forms for MOW permits may be obtained from the CAAS
SAG-05  Radioac ve materials ?nal des na on must be Jeddah, Riyadh or Dammam only website (www.caas.gov.sg). All applica ons are to be made on prescribed forms and
except those intended for medical purposes may be imported to any point in Saudi Arabia addressed to:
unless purpose is re?ected in the Shipper's declara on.
Dangerous Goods Unit
SAG-06  Name, address, and telephone number of consignee must be wri en in full on Airworthiness/Flight Opera ons Division
each package of dangerous goods shipments to any des na on in Saudi Arabia. Civil Avia on Authority of Singapore
PO Box 1, Singapore Changi Airport
SINGAPORE, 918141
Tel: +65 6541 3487, Fax: +65 6545 6519
[email protected]

ZAG (South Africa)  ZAG-03  On shipments to, from or transi ng through the republic of South Africa, the
shippers declara on must include a 24 hour emergency response telephone number
ZAG-01 Applica ons for approval to transport dangerous goods under Special Provision A1 (including applicable area and interna onal codes) for use in the event of an incident
or A2 and Exemp on applica ons must be directed to (see 1.2.5, 8.1.6.9.4 and 8.3): involving the dangerous goods. The number must be monitored at all mes by a person
who:
The Commissioner for Civil Avia on
South Africa Civil Avia on Authority 1. is knowledgeable of the hazards and characteris cs of the dangerous goods being
Private Bag X08 transported; or
Waterkloof, REPUBLIC OF SOUTH AFRICA, 0145
2. has immediate access to a person who possesses such knowledge and informa on.
Individual shippers must obtain a permit for the carriage by air of the following (see 8.1.6.11, and 10.8.3.11).
commodi es in respect of each consignment before it is tendered for carriage to/from or
through the airspace: ZAG-04  Radioac ve material and infec ous substances (including diagnos c specimens
and biological products), are not permi ed in air mail either to, from or through the
Class 1—Explosives: Republic of South Africa (see 2.4 and 10.2.2).
Chief Inspector of Explosives
Private Bag X624, Pretoria
REPUBLIC OF SOUTH AFRICA, 0001

For military armaments and ammuni on of war:
The Commissioner for Civil Avia on
South Africa Civil Avia on Authority
Private Bag X08
Waterkloof, REPUBLIC OF SOUTH AFRICA, 0145
(see Note below)

Note: Where armaments and/or ammuni on are regarded as muni ons of war or if they
are to be used for military purposes, the approval of the Commissioner for Civil Avia on is
required in terms of Sec on 15A of the Avia on Act No. 74 of 1962.

ZAG-02  Transport of dangerous goods by air must be in accordance with the current
edi on of the ICAO Technical Instruc ons for the Safe Transport of Dangerous Goods by
Air, (Doc 9284-AN/905). Failure to comply with the Technical Instruc ons and all relevant
South African varia on is a viola on of the South African Civil Avia on Regula ons, 1997
as amended (see Subsec on 1.2).

Editorial Note: The IATA dangerous Goods Regula ons are fully in compliance with ICAO
Annex 18 and its associated Technical Instruc ons (Doc 9284).

OPERATOR VARIATIONS  CX-07 UN 3090 Lithium metal ba eries. Lithium metal cells and ba eries are prohibited
from carriage as cargo on Cathay Paci?c Airways aircra . This applies to Sec on IA, IB and
  Sec on II of Packing Instruc on 968.

CX (Cathay Paci?c Airways) This prohibi on does not apply to:

CX-01 UN 3480 Lithium ion ba eries. Lithium ion cells and ba eries are prohibited from • lithium metal cells and ba eries packed with or contained in equipment (UN 3091) in
carriage as cargo on Cathay Paci?c Airways aircra . This applies to Sec on IA, IB and accordance with PI 969 and PI 970 and lithium ion cells and ba eries (UN 3480 and UN
Sec on II of Packing Instruc on 965. 3481) in accordance with PI 965 to PI 967; or

This prohibi on does not apply to: ?? lithium ba eries (rechargeable and non-rechargeable) covered by the Provisions
for Dangerous Goods Carried by Passengers or Crew (see 2.3.2 to 2.3.5 and Table
•lithium ion cells and ba eries packed with or contained in equipment (UN 3481) in 2.3.A).
accordance with PI 966 and PI 967; or
CX-08 All shipments of lithium ba eries contained in equipment prepared in compliance
•lithium ba eries (rechargeable and non-rechargeable) covered by the Provisions for with Sec on II of PI 967 or PI970 must include the mandatory wording on the air waybill
Dangerous Goods Carried by Passengers or Crew (see 2.3.2 to 2.3.5 and Table 2.3.A). as shown in Sec on II (“Lithium ion ba eries in compliance with Sec on II of PI 967” or
“Lithium metal ba eries in compliance with Sec on II of PI 970”). This applies even to
CX-02 All combina on packagings containing liquid dangerous goods in Packing Groups I, II shipments where no lithium ba ery handling label is required to be a?xed to the
or III must contain su?cient absorbent material to absorb the en re package(s).
contents of all the inner packagings.
EK (Emirates)
CX-03 Not used.
EK-01 An emergency response contact number provided by the shipper must be inserted
CX-04 The shipper must provide a 24-hour emergency telephone number of a in the Addi onal Handling Informa on box of the Shipper's Declara on for Dangerous
person/agency who is knowledgeable of the hazards, characteris cs and ac ons to be Goods (see 8.1.6.11 and 10.8.3.11).
taken in case of an accident or incident concerning (each of) the dangerous goods being
transported. This telephone number, including country and area code, EK-02 The following dangerous goods will not be accepted for carriage as cargo on
preceded by the words “Emergency Contact” or “24-hour number” must be inserted on Emirates:
the DGD preferably in the “Addi onal Handling Informa on” box, e.g. “Emergency Contact
+47 67 50 00 00” (see 8.1.6.11 and 10.8.3.11). • UN 3090 – Lithium metal cells and ba eries, including lithium alloy cells and ba eries,
prepared in accordance with Sec on IA, IB and II of Packing Instruc on 968. This
CX-05 Liquid substances single packagings of drums and jerricans of any material must be prohibi on includes lithium metal ba eries shipped under an approval in accordance with
prepared as follows: Special Provision A88 and A99 and exemp on in accordance with Special Provision A201.

1. the steel drums/plas c drums/plas c jerricans must be protected by other strong outer • UN 3480 – Lithium ion cells and ba eries, including lithium polymer cells and ba eries,
packaging, for example ?breboard box; or prepared in accordance with Sec on IA, IB and II of Packing Instruc on 965. This
prohibi on includes lithium metal ba eries shipped under an approval in accordance with
2. if prepared as an open overpack, a suitably sized plas c, foam or wooden pallet must be Special Provision A88 and A99.
used to protect at least the top and bo om of the packaging.

CX-06 In addi on to the requirements of 8.2.5, the UN number(s) of all shipments of
dangerous goods in excepted quan es must be indicated on the air waybill.

EY (ETIHAD Airways) KE (Korean Airlines) 
KE-01  Dangerous Goods, including Dangerous Goods in Excepted Quan ty and
EY-01 The shipper must provide a 24-hour emergency telephone number of a person/ Radioac ve Material in Excepted Packages in consolida ons will not be accepted for
agency who is knowledgeable of the hazards, characteris cs and ac ons to be taken in carriage, except for the following shipments:
case of an accident or incident concerning (each of) the dangerous goods being transport-
ed. This telephone number, including country and area code, preceded by the •consolida ons having one master air waybill with one house air waybill;
words “Emergency Contact” or “24-hour number” must be inserted on the DGD
preferably in the “Addi onal Handling Informa on” box, e.g. “Emergency Contact +47 67 •consolida ons containing UN 1845, Carbon dioxide, solid (Dry ice) when used as a
50 00 00” (see 8.1.6.11 and 10.8.3.11). refrigerant.
(see 1.3.3, 8.1.2.4, 9.1.8 and 10.8.1.5).
A 24-hour emergency telephone number is not required for shipments that do not
require a Shipper's Declara on for Dangerous Goods. KE-02  Reserva ons must be made well in advance for any shipment containing
dangerous goods as de?ned in these Regula ons (see 1.3.2 and 9.1.2).
EY-02 All Class 1 Explosives, Division 6.2 Infec ous substances and Class 7 Radioac ve
materials and Salvage Packagings as de?ned in these Regula ons, will not be accepted KE-03  Shipper's Declara ons for Dangerous Goods must be completed in English, with
for carriage unless prior approval and booking arrangements are obtained from: copies requested by KE but not less than 2 copies for each shipment (see 8.1.2.1 and
10.8.1.4). All package and overpack markings required by these Regula ons must also be
ETIHAD Airways Cargo Reserva ons completed in English.
PO Box 35566
Cargo Village KE-04 Not used.
Abu Dhabi Interna onal Airport
United Arab Emirates KE-05 Radioac ve Type B(M) packages will not be accepted for carriage.
Tel: +971 2 599 0099
email: cargocs@e had.ae KE-06  Dangerous goods, including “Dangerous Goods in Excepted Quan ty” and
“Radioac ve Material in Excepted Package”, will not be accepted for carriage on KE's
EY-03 Dangerous goods in single packagings and cryogenic containers (Dewars), are not passenger ?ight. The only excep ons are UN 3166, ID 8000, UN 1845, UN 2807 and UN
accepted for carriage unless overpacked. 3373.

EY-04 Fully Regulated Lithium Metal Ba eries (RLM) will not be accepted (see PI 968 - PI KE-07  Except for ID 8000, Consumer commodity, all liquid dangerous goods must
970). comply with the following packaging requirements in addi on to those speci?ed in the
packing instruc ons (see 5.0.2.14):
EY-05 Dangerous Goods in Excepted Quan es will not be accepted.
(a) Single Packaging using UN Speci?ca on Packaging is:
EY-06 UN 3480 Lithium ion ba eries. Lithium ion cells and ba eries are prohibited from
carriage as cargo on E had aircra . This applies to Sec on IA, IB and Sec on II of Packing • acceptable if it is a Steel Drum (1A1 or 1A2) or Composite Packaging—plas c receptacle
Instruc on 965. with outer steel drum (6HA1); or

This prohibi on does not apply to: • acceptable it is overpacked by a strong wooden crate.

•lithium ion cells and ba eries packed with or contained in equipment (UN 3481) in (b) Combina on Packaging using Limited Quan ty Packaging is:
accordance with PI 966 and PI 967; or •acceptable if it is overpacked by a strong wooden crate.

•lithium ba eries (rechargeable and non-rechargeable) covered by the Provisions for
Dangerous Goods Carried by Passengers or Crew (see 2.3.2 to 2.3.5 and Table 2.3.A).

EY-07 Dangerous goods as de?ned in these Regula ons will not be accepted in Air Mail.

QF (Qantas Airways)  QR (Qatar Airways) 

QF-01 Not used QR-01 UN 1845 Carbon dioxide, solid (Dry Ice) is restricted as follows:
–Maximum of 200 kg per aircra hold (A and bulk holds are considered as one hold) on
QF-02 Division 4.1 Flammable solids. Passengers and crew are not permi ed to bring book all aircra types except on B777F.
matches onto aircra for personal use. Book matches are only allowed as correctly packed –B777F – 400 kg in lower deck (Total in FWD + AFT + Bulk). Total Dry Ice quan ty in lower
and declared dangerous goods consignments (see 2.3.5.6) deck and main deck must not exceed 1000 kg.

QF-03 Operator approval is required for the carriage of all new and used internal QR-02 Dangerous goods are not permi ed in the following:
combus on engines (see 2.3.5.15). • Air mail, including those items permi ed by 2.4.2
• Qatar Airways excess cargo product “courier baggage voucher (CBV)”
QF-04 Oxygen or air, gaseous cylinders required for medical use are only accepted for
transport in or as carry-on baggage (see 2.3.4.1). QR-03 The shipper must provide a 24-hour emergency telephone number of a person/
agency, who is knowledgeable of the hazards, characteris cs and ac ons to be taken
QF-05 Shipments of UN 3090, lithium metal cells and ba eries are prohibited from during an emergency concerning each of the dangerous goods being transported. This
carriage on Qantas aircra . This applies to Sec on IA, IB and Sec on II of Packing telephone number, including the country and area code, preceded by the words
Instruc on 968. “Emergency Contact” must be inserted on the “Handling Informa on” box of the DGD.

Shipments exempt from this provision are: 2.8.4 - New Provision - List of Operator VariaOons
• UN 3091, lithium metal cells and ba eries when packed with or contained in equipment
in accordance with Packing Instruc ons 969 and 970; QR-04 The following will not be accepted for carriage on Qatar Airways passenger ?ights:
• UN 3481, lithium ion cells and ba eries when packed with or contained in equipment •UN 3090—lithium metal ba eries;
in accordance with Packing Instruc on 966 and 967; •UN 3091—lithium metal ba eries contained in equipment;
• Lithium ba eries when in accordance with the Provisions for Dangerous Goods Carried •UN 3091—lithium metal ba eries packed with equipment.
by Passengers or Crew.
The above include both Sec on I (fully regulated) and Sec on II (excepted) (see PI 968–
QF-06 Shipments of UN 3480 – Lithium ion ba eries, including lithium polymer ba eries 970).
are prohibited from carriage as cargo on Qantas aircra . This applies to Sec on IA, IB and
II of Packing Instruc on 965. Shipments exempt from this prohibi on are: QR-05 Class 8—Corrosives. The following items will not be accepted on Qatar Airways pas-
• UN 3480 Lithium ion ba eries (including lithium polymer ba eries), shipped as A.O.G senger and cargo aircra :
spares. •UN 2803—Gallium;
•UN 2809—Mercury; and
° The words “A.O.G Spares” must be entered in the “Addi onal Handling •UN 3506—Mercury contained in manufactured ar cles.
Informa on” on the Shipper’s Declara on or on the air waybill when no Shipper’s
Declara on is required in the “Handling Informa on” or “Nature and Quan ty of
Goods”.

• UN 3480 Lithium ion ba eries (including lithium polymer ba eries), when shipped
for use in urgent life-saving devices (where no other means of transport is available).

° The words “Urgently required to Support Life-Saving Devices” must be entered in
the “Addi onal Handling Informa on” on the Shipper’s Declara on or on the air
waybill when no Shipper’s Declara on is required in the “Handling Informa on” or
“Nature and Quan ty of Goods”.

The above exempt shipments must:
• not exceed 100 kg net each;
• comply with all relevant parts of the Dangerous Goods Regula ons (e.g. Shipper's
Declara on if applicable);
• not exceed 100 kg total weight per aircra ; and
• be loaded into a Class C cargo compartment (lower deck only).

CLASSIFICATION TABLES -
SECTION 3 IATA DGR

TABLE 3.3.A
Class 3 - Packing Group Assignment

IDENTIFICATION (BLUE PAGES) &
NUMERICAL CROSS-REFERENCE EXTRACT -

SECTION 4.2 & 4.3 IATA DGR

Passenger and Cargo
Cargo Aircraft Aircraft Only
Ltd Qty
UN/ Proper Shipping Class or Hazard EQ Max Net Pkg Inst Max Net S.P. ERG
ID no. Name/Description Div. (Sub Labels(s) see Max Net Qty/Pkg Qty/Pkg see 4.4 Code
PG 2.6 Pkg Inst Qty/Pkg Pkg Inst
Risk) D
AB EF G H I J K L MN
C Oxidizer
1442 Ammonium perchlorate II E2 Y544 2.5 kg 558 5 kg 562 25 kg A22 5L
5.1

Amosite, see Asbestos amphibole † (UN 2212)

1106 Amylamine 3 (8) Flamm. liquid II E2 Y340 0.5 L 352 1 L 363 5 L A3 3C
& Corrosive III E1 Y342 1L 354 5 L 365 60 L A803 3C

2212 Asbestos amphibole † 9 Forbidden Forbidden Forbidden A61 9L
(amosite, tremolite, actinolite, anthophylite, crocidolite) 852 5 L

2829 Caproic acid 8 Corrosive III E1 Y841 1L Forbidden 856 60 L A803 8L

1365 Cotton, wet 4.2 Forbidden 653 1 L Forbidden A2 4L
654 5 L
Creosote, see Toxic liquid, organic n.o.s. ?
(UN 2810)

2076 Cresols, liquid 6.1 (8) Toxic II E4 Y640 0.5 L 660 30 L 6C
1594 Diethyl sulphate 1L 662 60 L 6L
& Corrosive

6.1 Toxic II E4 Y641

1170 Ethanol solution 3 Flamm. liquid II E2 Y341 1L 353 5L 364 60 L A3 3L

1176 Ethyl borate III E1 Y344 10 L 355 60 L 366 220 L A58 3L
1891 Ethyl bromide
A180

3 Flamm. liquid II E2 Y341 1L 353 5L 364 60 L 3L

6.1 Toxic II E4 Y641 1L 654 5L 662 60 L 6L

Class Passenger and Cargo
or Cargo Aircraft Aircraft Only
Div. Ltd Qty
UN/ Proper Shipping Hazard EQ Max Net Pkg Inst Max Net S.P. ERG
ID no. Name/Description (Sub Labels(s) see Max Net Qty/Pkg Qty/Pkg see 4.4 Code
Risk) PG 2.6 Pkg Inst Qty/Pkg Pkg Inst

A B C D EF G H I J K L MN

1190 Ethyl formate 3 Flamm. liquid II E2 Y341 1L 353 5L 364 60 L 3H

Ethyl sulphate, see Diethyl sulphate (UN 1594)

1993 Flammable liquid, n.o.s. ? 3 Flamm. liquid I E3 Forbidden 351 1 L 361 30 L A3 3H

II E2 Y341 1L 353 5L 364 60 L 3H
3L
III E1 Y344 10 L 355 60 L 366 220 L

2924 Flammable liquid, corrosive, n.o.s. ? 3 (8) Flamm. liquid I E0 Forbidden 350 0.5 L 360 2.5 L A3 3CH

& Corrosive II E2 Y340 0.5 L 352 1 L 363 5 L A803 3CH

III E1 Y342 1L 354 5L 365 60 L 3C

3412 Formic acid 8 Corrosive II E2 Y840 0.5 L 851 1 L 855 30 L 8L
with = 10% but = 85% acid by weight

3412 Formic acid 8 Corrosive III E1 Y841 1L 852 5L 856 60 L A803 8L
with = 5% but < 10% acid by weight

1779 Formic acid 8 (3) Corrosive II E2 Y840 0.5 L 851 1 L 855 30 L 8F
with more than85% acid by weight & Flamm. Liquid

Formic ether, see Ethyl formate (UN 1190)

Hexanoic acid, see Caproic acid (UN 2829)

1789 Hydrochloric acid 8 Corrosive II E2 Y840 0.5 L 851 1 L 855 30 L A3 8L

III E1 Y841 1L 852 5L 856 60 L A803 8L

1790 Hydrofluoric acid 8 (6.1) Corrosive II E2 Y840 0.5 L 851 1 L 855 30 L 8P
60% or less strength & Toxic

UN/ Proper Shipping Class Hazard EQ Passenger and Max Net Cargo
ID no. Name/Description or Labels(s) see Cargo Aircraft Qty/Pkg Aircraft Only
Div. PG 2.6 Ltd Qty
Max Net S.P. ERG
(Sub Max Net Pkg Inst Qty/Pkg see 4.4 Code
Risk) Pkg Inst Qty/Pkg Pkg Inst

AB C D EF GH I J K L MN

1790 Hydrofluoric acid 8 (6.1) Corrosive I E0 Forbidden 850 0.5 L 854 2.5 L 8P
more than 60% strength & Toxic

1786 Hydrofluoric acid and sulphuric acid mixture 8 (6.1) Corrosive I E0 Forbidden Forbidden 854 2.5 L A1 8P
& Toxic Forbidden Forbidden

1048 Hydrogen bromide, anhydrous 2.3 (8) Forbidden A2 2CP

2014 Hydrogen peroxide, aqueous solution 5.1 (8) Oxidizer II E2 Y540 0.5 L 550 1L 554 5L 5C

with 20% or more but 40% or less hydrogen peroxide & Corrosive

(stabilized as necessary)

2984 Hydrogen peroxide, aqueous solution 5.1 Oxidizer III E1 Y541 1.0 L 551 2.5 L 555 30 L A803 5L

with 8% or more but less than 20% hydrogen peroxide

(stabilized as necessary)

2014 Hydrogen peroxide, aqueous solution 5.1 (8) Forbidden Forbidden Forbidden A2 5C
with more than 40% but 60% or less hydrogen peroxide A75
(stabilized as necessary)

1218 Isoprene, stabilized 3 Flamm. liquid I E3 Forbidden 351 1 L 361 30 L 3H

1219 Isopropanol 3 Flamm. liquid II E2 Y341 1L 353 5L 364 60 L A180 3L

2054 Morpholine 8 (3) Corrosive I E0 Forbidden 850 0.5 L 854 2.5 L 8F
& Flamm. liquid

1268 ? 3 Flamm. liquid I E3 Forbidden 351 1 L 361 30 L A3 3H

Petroleum distillates, n.o.s. II E2 Y341 1L 353 5L 364 60 L 3H

?

III E1 Y344 10 L 355 60 L 366 220 L 3L

Passenger and Cargo
Cargo Aircraft Aircraft Only

UN/ Proper Shipping Class or Hazard EQ Ltd Qty Pkg Inst Max Net Max Net S.P. ERG
ID no. Name/Description Div. Labels(s) see Qty/Pkg Pkg Inst Qty/Pkg see 4.4 Code
(Sub PG 2.6 Max Net
Risk) D Pkg Inst Qty/Pkg

AB C Corrosive EF G H I J K L MN

2577 Phenylacetyl chloride 8 II E2 Y840 0.5 L 851 1 L 855 30 L 8i

?

Phenylamine, see Aniline (UN 1547)

1-Phenylbutane, see Butylbenzenes (UN2709)
2-Phenylbutane, see Butylbenzenes (UN2709)

3332 Radioactive material, Type A package, 7 Radioactive Forbidden See 10.3 See 10.3 A78 7L
special form non-fissile or fissile excepted 200 75 kg A139

3159 Refrigerant gas R 134a 2.2 Non-flamm. gas E1 Forbidden 200 150 kg 2L

1500 Sodium nitrite 5.1 Oxidizer & Toxic III E1 Y546 10 kg 559 25 kg 563 100 kg A803 5P
(6.1)
1385 Sodium sulphide †
with less than 30% water of crystallization 4.2 Spont. comb. II E2 Forbidden 467 15 kg 470 50 kg 4L

1385 Sodium sulphide, anhydrous † 4.2 Spont. comb. II E2 Forbidden 467 15 kg 470 50 kg 4L
2810 Toxic liquid, organic n.o.s. ?
6.1 Toxic I E5 Forbidden 652 1 L 658 30 L A3 6L
654 5 L 662 60 L A4 6L
II E4 Y641 1L 655 60 L 663 220 L A137 6L

III E1 Y642 2L

UN or Name and Description Page UN or Name and Description Page
ID No. Hydrogen bromide, anhydrous No. ID No. No.
2014 Hydrogen peroxide, aqueous solution
1048 16 with 20% or more but 40% or less hydrogen peroxide 16
14 2014 (stabilized as necessary)
1106 Amylamine 14 16
14 2054 Hydrogen peroxide, aqueous solution
1170 Ethanol solution 15 with more than 40% but 60% or less hydrogen peroxide 16
16 (stabilized as necessary) 14
1176 Ethyl borate 16 14
16 Morpholine
1190 Ethyl formate 14 16
17 17
1218 Isoprene, stabilized 17 2076 Cresols, liquid 14
1219 Isopropanol 14 2212 15
1268 Petroleum distillates, n.o.s. 17 Asbestos amphibole † 16
1365 Cotton, wet 14 2577 (amosite, tremolite, actinolite, anthophylite, crocidolite)
1385 Sodium sulphide † with less than 30% water of crystallization 15 2810 Phenylacetyl chloride 17
17
16 Toxic liquid, organic n.o.s. ?
15 15
1385 Sodium sulphide, anhydrous † 15 2829 Caproic acid
1442 Ammonium perchlorate 2924 15
16 2984 Flammable liquid, corrosive, n.o.s. ?
1500 Sodium nitrite
14 3159 Hydrogen peroxide, aqueous solution
1594 Diethyl sulphate 15 with 8% or more but less than 20% hydrogen peroxide
(stabilized as necessary)
1779 Formic acid
1786 with more than85% acid by weight Refrigerant gas R 134a

Hydrofluoric acid and sulphuric acid mixture 3332 Radioactive material, Type A package,
3412 special form non-fissile or fissile excepted
1789 Hydrochloric acid 3412
Formic acid
1790 Hydrofluoric acid with = 10% but = 85% acid by weight
1790 60% or less strength
1891 Formic acid
Hydrofluoric acid with = 5% but < 10% acid by weight
more than 60% strength

Ethyl bromide

1993 Flammable liquid, n.o.s. ?

SPECIAL PROVISION EXTRACT

A1 This ar cle or substance may be transported on passenger aircra only with the prior approval of the appropriate authority of the State of origin and the State of the operator under the
wri en condi ons established by those authori es. A copy of the document of approval, showing the quan ty limita ons and packing requirements, must accompany the consignment.
The ar cle or substance may be carried on cargo aircra in accordance with Columns K and L of the List of Dangerous Goods in Subsec on 4.2. Where States, other than the State of origin
and the State of the operator, have lodged a varia on advising that they require prior approval of shipments made under this Special Provision, approval must also be obtained from these
States, as appropriate.

Note: Where Special Provision A1 applies to an item in SubsecOon 4.2 and the “hand” symbol “ is also shown in the leO margin, these items may be accepted for transport by operator(s) on cargo aircraO provided approval has been re-
ceived and advance arrangements made with the operator(s) (see also SubsecOon 9.0).

A2 This ar cle or substance may be transported on cargo aircra , only with the prior approval of the appropriate authority of the State of origin and the State of the operator under the
wri en condi ons established by those authori es.
Where States, other than the State of origin and the State of the operator, have lodged a varia on advising that they require prior approval of shipments made under this Special Provision,
approval must also be obtained from the States of transit, over?ight and des na on, as appropriate.
In each case, a copy of the document(s) of approval, showing the quan ty limita ons and the packing requirements, must accompany the consignment.

A3 (223) If the chemical or physical proper es of a substance covered by this descrip on are such that, when tested, it does not meet the established de?ning criteria for the class or
division listed in Column C, or any other class or division, it is not subject to these Regula ons.

A4 Liquids having a vapour inhala on toxicity of Packing Group I are forbidden on both passenger and cargo aircra . Liquids having a mist inhala on toxicity of Packing Group I are forbid-
den on a passenger aircra .
They may be carried on cargo aircra providing they are packed in accordance with the packing instruc ons for the Packing Group I substance and the maximum net quan ty per package
does not exceed 5 L.

A22 (152) The classi?ca on of this substance will vary with par cle size and packaging, but borderlines have not been experimentally determined. The appropriate classi?ca on must be
made using the procedure for the classi?ca on of explosives.

A97 These entries must be used for substances which are hazardous to the environment but do not meet the classi?ca on criteria of any other class or other substance within Class 9. This
must be based on the criteria as indicated in 3.9.2.4. This designa on may also be used for wastes not otherwise subject to these Regula ons but which are covered under the Basle Con-
ven on on the Control of Transboundary Movements of Hazardous Wastes and their Disposal.

A137 (315) This entry must not be used for Division 6.1 substances that meet the inhala on toxicity criteria for Packing Group I described in 3.6.1.5.3.2.

A158 (335) Mixtures of solids which are not subject to these Regula ons and liquids or solids classi?ed by the shipper as environmentally hazardous substances (UN 3077 and UN 3082)
may be transported under this entry, provided there is no free liquid visible at the me the substance is loaded or at the me the packaging is closed. Sealed packets and ar cles containing
less than 10 mL of an environmentally hazardous liquid, absorbed into a solid material but with no free liquid in the packet or ar cle, or containing less than 10 g of an environmentally
hazardous solid, are not subject to these Regula ons.

A803 Notwithstanding the assignment of a packing group III in column E, substances assigned to these entries must be packed in UN Speci?ca on packagings that meet packing group II
performance standards. This does not apply when the substances are prepared for transport in accordance with the limited quan ty provisions.

PACKING INSTRUCTIONS EXTRACT -
SECTION 5 IATA DGR

PACKING INSTRUCTION Y340

OPERATOR VARIATIONS: 5X-02 AA-01 AM-03 AS-02 BW-01 CX-02 DE-01 FX-02/17 GA-03 GF-04 HA-01 IJ-12 KA-02 KC-11 KE-07 KQ-08 LD-02 LH-01 LX-02 LY-04 MH-14 OM-08 OS-03
OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01 WY-04 XG-01 XK-03 XQ-01
This instruction applies to Limited Quantities of flammable liquids with a Class 8 or a Class 8 and Division 6.1 subsidiary risk in Packing Group II.
The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to
meet the marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in
Subsection 6.6.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;
?? a 24 hour stacking test;
?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);
?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 0.5 L 0.5 L
Plastic 0.5 L
0.5 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alumin- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other

Desc Steel ium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood stituted board Plastic metal

PACKING INSTRUCTION Y341

STATE VARIATIONS: BEG-03 SAG-01

OPERATOR VARIATIONS: 5X-02 AA-01 AM-03 AS-02 BW-01 CX-02 DE-01 FX-02 /17 GA-03 GF-04 HA-01 IJ-12 IR-06 KA-02 KC-11 KE-07 KQ-08 LD-02 LH-01 LX-02 LY-04 MH-14 OM-08 OS-03
OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01 WY-04 XG-01 XK-03 XQ-01

This instruction applies to Limited Quantities of flammable liquids with no subsidiary risk or a subsidiary risk of Division 6.1 in Packing Group II.

The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.

Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;

?? a 24 hour stacking test;

?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);

?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package

Glass 0.5 L 1.0 L
Metal 0.5 L
Plastic 0.5 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other

Desc Steel minium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood stituted board Plastic metal

PACKING INSTRUCTION Y342

OPERATOR VARIATIONS: AM-03 CX-02 DE-01 FX-17 GA-03 GF-04 IJ-12 KA-02 KC-11 KE-07 KQ-08 LD-02 LH-01 LX-02 LY-04 MH-14 OM-08 OS-03 OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01
WY-04 XG-01 XK-03 XQ-01
This instruction applies to Limited Quantities of flammable liquids with a Class 8 subsidiary risk in Packing Group III.
The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;
?? a 24 hour stacking test;
?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);
?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 1.0 L
Plastic 1.0 L
1.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other

Desc Steel minium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood stituted board Plastic metal

PACKING INSTRUCTION Y344

STATE VARIATIONS: BEG-03, SAG-01, USG-04
OPERATOR VARIATIONS: AM-03 CX-02 DE-01 FX-17 GA-03 GF-04 IJ-12 KA-02 KC-11 KE-07 KQ-08 LD-02 LH-01 LX-02 LY-04 MH-14 OM-08 OS-03 OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01
WY-04 XG-01 XK-03 XQ-01
This instruction applies to Limited Quantities of flammable liquids with no subsidiary risk in Packing Group III.
The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;
?? a 24 hour stacking test;
?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);
?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 10.0 L
Plastic 5.0 L
5.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other

Desc Steel minium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood stituted board Plastic metal

PACKING INSTRUCTION 351

STATE VARIATIONS: BEG-03
OPERATOR VARIATIONS: AI-02, AM-03, BR-02, CX-02, FX-17, KA-02, KZ-07, LD-02, LY-04, OM-12, OZ-04, TU-05, VN-04
This instruction applies to flammable liquids in Packing Group I on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? Inner packagings must be packed with sufficient absorbent material to absorb the entire contents of the inner packagings and

placed in a rigid leakproof receptacle before packing in outer packagings.
Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package

Glass 0.5 L 1.0 L
Metal 1.0 L
Plastic Forbidden

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium Plastic Steel minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal Steel wood board Plastic metal

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
3H2 4A 4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 4F

PACKING INSTRUCTION 352

STATE VARIATIONS: USG-04
OPERATOR VARIATIONS: 5X-02 AA-01 AM-03 AS-02 BW-01 CX-02/05 FX-02/17 KA-02/05 KZ-07 LD-02/06 LY-04 UX-04
This instruction applies to flammable liquids with a Class 8 and/or Division 6.1 subsidiary risk in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 1.0 L
Plastic 1.0 L
1.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
Steel minium Plastic Steel minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal wood board Plastic metal

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

PACKING INSTRUCTION 353

STATE VARIATIONS: BEG-03
OPERATOR VARIATIONS: AM-03 CX-02 FX-17 IR-06 KA-02 KZ-07 LD-02 LY-04
This instruction applies to flammable liquids without a subsidiary risk in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 5.0 L
Plastic 5.0 L
5.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium Plastic Steel minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal Steel wood board Plastic metal
3B1
1A1 1B1 1H1 1N1 3A1 3B2 3H1 4C1 4F 4H1
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3H2 4A 4B 4C2 4D 4G 4H2 4N

PACKING INSTRUCTION 354

OPERATOR VARIATIONS: AM-03 AY-04 CA-10 CI-04 CX-02/05 EI-01 EY-03 FX-17 JL-09 KA-02/05 KC-06 KE-07 KZ-07 LD-02/06 LY-04 MK-12 M6-01 NH-06 OK-04 OZ-08 SK-04 TG-02 UA-01
This instruction applies to flammable liquids with a Class 8 subsidiary risk in Packing Group III on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? packagings must meet Packing Group II performance standards.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 5.0 L
Plastic 5.0 L
5.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
Steel minium Plastic Steel minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
3H1 3H2
Spec. 1A1 1A2 1B1 1B2 1H1 1H2 1N1 1N2 3A1 3A2 3B1 3B2 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 355

STATE VARIATIONS BEG-03, USG-04/13
OPERATOR VARIATIONS: 5X-02, AA-01, AM-03, AS-02, AY-04, BA-01, BW-01, CA-10, CX-02, EI-01, EY-03, FX-02/17, JL-09 KA-02, KC-06, KE-07, KZ-07, LD-02, LY-04, M6-01, MK-12, NH-06,
OK-04, OM-06, TG-02, UA-01, UX-04
This instruction applies to flammable liquids with no subsidiary risk or a subsidiary risk of Division 6.1 in Packing Group III on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 60.0 L
Plastic 10.0 L
10.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
Steel minium Plastic Steel minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
3H1 3H2
Spec. 1A1 1A2 1B1 1B2 1H1 1H2 1N1 1N2 3A1 3A2 3B1 3B2 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 361

STATE VARIATIONS: BEG-03, USG-04
OPERATOR VARIATIONS: 5X-02 AY-04 BR-02 CA-10 CCX-02 EY-03 FX-02/15/17 JL-09 KA-02 KE-07 KZ-07 LD-02 MK-12 NH-06 OZ-08 TG-02
This instruction applies to flammable liquids with no subsidiary risk or a subsidiary risk of Division 6.1 in Packing Group I on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? Inner packagings must be packed with sufficient absorbent material to absorb the entire contents of the inner packagings and

placed in a rigid leakproof receptacle before packing in outer packagings.
Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 30.0 L
Plastic 5.0 L
Forbidden

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
minium minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Plastic Steel wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
Spec. 1A1 3H1
1B1 1H1 1N1 3A1 3B1 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 363

OPERATOR VARIATIONS: 5X-02 AY-04 CA-10 CI-04 CX-02/05 EY-03 FX-02/17 JL-09 KA-02/05 KE-07 KZ-07 LD-02/06 MK-12 NH-06 OZ-08 TG-02
This instruction applies to flammable liquids with a Class 8 or a Class 8 and Division 6.1 subsidiary risk in Packing Group II on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 5.0 L
Plastic 5.0 L
2.5 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
minium Plastic minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Steel wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
Spec. 1A1 3H1
1B1 1H1 1N1 3A1 3B1 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 364

STATE VARIATIONS: BEG-03
OPERATOR VARIATIONS: 5X-02 AY-04 BA-01 CA-10 CX-02 EY-03 FX-02/17 IR-06 JL-09 KA-02 KE-07 KZ-07 LD-02 M6-01 MK-12 NH-06 OZ-08 TG-02
This instruction applies to flammable liquids with no subsidiary risk or a subsidiary risk of Division 6.1 in Packing Group II on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 60.0 L
Plastic 10.0 L
5.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Recon-

Alu- Ply- Other Alu- Alu- Ply- stituted Other

Desc Steel minium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood wood Fibreboard Plastic metal

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
Spec. 1A1 3H1
1B1 1H1 1N1 3A1 3B1 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 365

OPERATOR VARIATIONS: AY-04 CA-10 CI-04 CX-02/05 EY-03 FX-17 JL-09 KA-02/05 KE-07 KZ-07 LD-02/06 M6-01 MK-12 NH-06 OZ-08 TG-02
This instruction applies to flammable liquids with a Class 8 subsidiary risk in Packing Group III on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? packagings must meet Packing Group II performance standards if the substance has a Class 8 subsidiary risk.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 5.0 L 60.0 L
Plastic 25.0 L
10.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
minium Plastic minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Steel wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
3H1 3H2
Spec. 1A1 1A2 1B1 1B2 1H1 1H2 1N1 1N2 3A1 3A2 3B1 3B2 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 366

STATE VARIATIONS: BEG-03, USG-04
OPERATOR VARIATIONS: 5X-02 AY-04 BA-01 CA-10 CX-02 EY-03 FX-02/17 JL-09 KA-02 KE-07 KZ-07 M6-01 MK-12 NH-06 OZ-08 TG-02
This instruction applies to flammable liquids with no subsidiary risk or a subsidiary risk of Division 6.1 in Packing Group III on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 5.0 L 220.0 L
Plastic 25.0 L
10.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
Steel minium Plastic Steel minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium
Steel Aluminium Plastic Other metal Steel Plastic Plastic
3H1 3H2
Spec. 1A1 1A2 1B1 1B2 1H1 1H2 1N1 1N2 3A1 3A2 3B1 3B2 As permitted
All in 5.0.6.6

PACKING INSTRUCTION 467

OPERATOR VARIATIONS: 5X-02 AM-04 KZ-07 LY-04 UX-05
This instruction applies to Division 4.2 solids without a subsidiary risk in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 kg 15.0 kg
Plastic 2.5 kg
2.5 kg

Plastic bag 1.0 kg

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium minium Wood wood stituted board Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Plastic Steel wood
4G 4H1
1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2
3B2 3H2 4A 4B 4C2 4D 4F

PACKING INSTRUCTION 470

OPERATOR VARIATIONS: 5X-02 EY-03 FX-02 IJ-02 JL-09 KZ-07 MK-12 NH-06 SQ-03 TG-02
This instruction applies to Division 4.2 solids in Packing Group II on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;

?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? fibreboard, wood and plywood single packagings must be fitted with a suitable liner.

Combination and single packagings are permitted.

Inner Packaging (see 6.1) COMBINATION PACKAGINGS Total net quantity per package
Net quantity per inner packaging

Glass 2.5 kg 50.0 kg
Metal 5.0 kg
Plastic 5.0 kg
Plastic bag 2.5 kg

OUTER PACKAGINGS Drums Jerricans Boxes
Type
Alu- Recon-
Alu- Ply- Other Steel minium Plastic Steel Alu- Ply- stituted Fibre- Other
minium wood wood board metal
Desc Steel minium wood Fibre Plastic metal Wood Plastic
4N
1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
Spec. 1A2 1B2 1D 1G 1H2 1N2 4H2
3A2 3B2 3H2 4A 4B 4C2 4D 4F 4G

SINGLE PACKAGINGS

Type Drums Jerricans Boxes Composites Cylinders
Plastic
Alu- Other Alu- Plas- Alu- Ply- Recon- Plastic Other- As
Desc Steel minium Plastic metal Steel minium tic Steel minium Wood wood stituted Fibre- metal permitted
wood board in 5.0.6.6

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4F 4G 4H2 4N All
Spec. 1A2 1B2 1H2 1N2 3A2 3B2 3H2 4A 4B 4C2 4D

PACKING INSTRUCTION Y540

OPERATOR VARIATIONS: 5X-02 AA-01 AM-05 AS-02 BW-01 BY-01 CM-03 CX-02 DE-01 FX-02/17 GA-03 GF-04 HA-01 IJ-12 JJ-07 KA-02 KC-11 KE-07 KQ-08 LD-02 LH-01 LX-02 LY-04 MH-14
OM-08 OS-03 OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01 WY-04 XG-01 XK-03 XQ-01
This instruction applies to Limited Quantities of Division 5.1 liquids in Packing Group II.
The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;
?? a 24 hour stacking test;
?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);
?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 0.1 L 0.5 L
Plastic 0.1 L
0.1 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
board Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel minium Plastic Steel minium Wood wood stituted

PACKING INSTRUCTION 550

OPERATOR VARIATIONS: 5X-02 AA-01 AM-05 AS-02 BW-01 BY-01 CM-03 CX-02 CX-05 FX-02 FX-17 JJ-07 KA-02 KA-05 KZ-07 LD-02 LD-06 LY-04 UX-04
This instruction applies to Division 5.1 liquids in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

Inner Packaging (see 6.1) COMBINATION PACKAGINGS Total net quantity per package
Net quantity per inner packaging 1.0 L
Glass
Metal 1.0 L
Plastic 1.0 L
1.0 L

OUTER PACKAGINGS Drums Boxes
Type

Desc Steel Alu- Plastic Other Alu- Wood Ply- Recon- Fibre- Other
minium Plywood Fibre metal Steel minium wood stituted board Plastic metal
wood

Spec. 1A1 1A2 1B1 1B2 1D 1G 1H1 1H2 1N1 1N2 4A 4B 4C1 4C2 4D 4F 4G 4H1 4H2 4N

PACKING INSTRUCTION 554

OPERATOR VARIATIONS: 5X-02 CX-02 CX-05 FX-02 FX-15 FX-17 IJ-02 KA-02 KA-05 KZ-07 LD-02 LD-06
This instruction applies to Division 5.1 liquids in Packing Group II on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

Inner Packaging (see 6.1) COMBINATION PACKAGINGS Total net quantity per package
Net quantity per inner packaging 5.0 L
Glass
Metal 2.5 L
Plastic 2.5 L
2.5 L

OUTER PACKAGINGS Drums Boxes
Type

Desc Steel Alu- Plastic Other Alu- Wood Ply- Recon- Fibre- Other
minium Plywood Fibre metal Steel minium wood stituted board Plastic metal
wood

Spec. 1A1 1A2 1B1 1B2 1D 1G 1H1 1H2 1N1 1N2 4A 4B 4C1 4C2 4D 4F 4G 4H1 4H2 4N

PACKING INSTRUCTION Y640

OPERATOR VARIATIONS: 5X-02 AA-01 AM-06 AS-02 BW-01 CX-02 DE-01 FX-02 GA-03 GF-04 HA-01 IJ-12 JU-06 KA-02 KE-07 KQ-08 LA-06 LD-02 LH-01 LX-02 LY-04 MH-14 OM-04 OS-03 OU-04
PX-10 SW-02 TN-04 UA-02 UX-02 VO-03 VT-01 WY-04 XG-01 XK-03 XQ-01
This instruction applies to Limited Quantities of Division 6.1 liquids with a Class 8 or a Class 3 and Class 8 subsidiary risk in Packing Group II.
The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Limited Quantity Requirements
The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;
?? a 24 hour stacking test;
?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);
?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 0.1 L 0.5 L
Plastic 0.1 L
0.1 L

OUTER PACKAGINGS

Type Drums Jerricans Boxes

Alu- Ply- Other Alu- Recon- Fibre- Other
minium Alu- Ply- stituted board Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Plastic Steel minium Wood wood wood

PACKING INSTRUCTION 653

OPERATOR VARIATIONS: 5X-02 AA-01 AM-06 AS-02 BW-01 CX-02/05 FX-02 HA-01 JJ-07 KA-02/05 KZ-07 LA-06 LD-02/06 LY-04 TU-09 UA-02 UX-04
This instruction applies to Division 6.1 liquids in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion for substances with a Class 8 subsidiary risk.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 1.0 L
Plastic 1.0 L
1.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
Steel minium Plastic Steel minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal wood board Plastic metal

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

PACKING INSTRUCTION Y840

OPERATOR VARIATIONS: 5X-02 AA-01 AM-08 AS-02 BW-01 BY-01 CI-04 CX-02 DE-01 FX-02/04/17 GA-03 GF-04 HA-01 IJ-12 JU-06 KA-02 KE-07 KQ-08 LD-02 LH-01 LX-02 MH-14 OM-04 OS-03
OU-04 PX-10 SW-02 TN-04 UX-02 VO-03 VT-01 WY-04 XG-01 XK-03 XQ-01

This instruction applies to Limited Quantities of Class 8 liquids in Packing Group II.

The General Packing Requirements of Subsections 2.7.5, 5.0.2 to 5.0.4 (with the exception of 5.0.2.3, 5.0.2.5, 5.0.2.11 and 5.0.2.14.2) must be met except that the packagings do not have to meet the
marking and testing requirements of 6.0.4 and Subsection 6.3. Packagings must meet the construction criteria specified in Subsections 6.1 and 6.2 and the test criteria specified in Subsection 6.6.

Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion;
?? substances of Class 8 are permitted in glass inner packagings only if the substance is free from hydrofluoric acid.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? glass inner packagings must be packed with sufficient absorbent material to absorb the entire contents of the inner packagings and placed in a rigid leakproof receptacle before packing in outer

packagings.
Limited Quantity Requirements

The requirements of Subsection 2.7 must be met including:

?? the capability of the package to pass a drop test of 1.2 m;

?? a 24 hour stacking test;

?? inner packagings for liquids must be capable of passing a pressure differential test (5.0.2.9);

?? the gross weight of the completed package must not exceed 30 kg.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package

Glass 0.1 L 0.5 L
Metal 0.1 L
Plastic 0.1 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium Plastic minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal Steel Steel wood board Plastic metal

PACKING INSTRUCTION 850

OPERATOR VARIATIONS: 5X-02 AA-01 AM-08 AS-02 BR-02 BW-01 BY-01 CI-04 CX-02 CX-05 FX-02 FX-17 JJ-07 KA-02 KA-05 KE-07 LD-02 LD-06 TU-11 UX-04 VN-04
This instruction applies to Class 8 liquids in Packing Group I on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion;
?? substances of Class 8 are permitted in glass inner packagings only if the substance is free from hydrofluoric acid.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? inner packagings must be packed with sufficient absorbent material to absorb the entire contents of the inner packagings and placed in a rigid leakproof receptacle before packing in outer

packagings.
Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 0.5 L
Plastic
0.5 L 0.5 L

0.5 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Recon- Fibre- Other
minium Alu- Ply- stituted board Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Plastic Steel minium Wood wood wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4F

PACKING INSTRUCTION 851

OPERATOR VARIATIONS: 5X-02 AA-01 AM-08 AS-02 BR-12 BW-01 BY-01 CI-04 CM-03 CX-02/05 FX-02/04/17 JJ-07 KA-02 KA-05 KE-07 LD-02/06 TU-11 UX-04
This instruction applies to Class 8 liquids in Packing Group II on passenger aircraft.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion;
?? substances of Class 8 are permitted in glass inner packagings only if the substance is free from hydrofluoric acid.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L
Plastic
1.0 L 1.0 L

1.0 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium minium Wood wood stituted board Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel Plastic Steel wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4F 4H1
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4B 4C2 4D 4G 4H2 4N

PACKING INSTRUCTION 854

OPERATOR VARIATIONS: 5X-02 BR-12 CI-04 CX-02/05 FX-02/04/17 KA-02/05 KE-07 LD-02/06
This instruction applies to Class 8 liquids in Packing Group I on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion;
?? substances of Class 8 are permitted in glass inner packagings only if the substance is free from hydrofluoric acid.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Additional Packing Requirements

?? inner packagings must be packed with sufficient absorbent material to absorb the entire contents of the inner packagings and placed in a rigid leakproof receptacle before packing in outer

packagings.
Single packagings are not permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 1.0 L 2.5 L
Plastic 1.0 L
1.0 L

OUTER PACKAGINGS

Type Drums Jerricans Boxes

Alu- Ply- Other Alu- Alu- Ply- Recon- Fibre- Other
minium Plastic Steel minium Wood wood stituted
Desc Steel minium wood Fibre Plastic metal Steel wood board Plastic metal

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4F 4H1
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4B 4C2 4D 4G 4H2 4N

PACKING INSTRUCTION 855

OPERATOR VARIATIONS: 5X-02 AY-04 BR-12 CA-10 CI-04 CX-02/05 EY-03 FX-02/04/17 JL-09 KA-02/05 KE-07 LD-02/06 M6-01 MK-12 NH-06 OZ-08 TG-02
This instruction applies to Class 8 liquids in Packing Group II on Cargo Aircraft Only.
The General Packing Requirements of 5.0.2 must be met.
Compatibility Requirements

?? substances must be compatible with their packagings as required by 5.0.2.6;
?? metal packagings must be corrosion resistant or with protection against corrosion;
?? substances of Class 8 are permitted in glass inner packagings only if the substance is free from hydrofluoric acid.

Closure Requirements

?? closures must meet the requirements of 5.0.2.7.

Combination and single packagings are permitted.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package
Glass
Metal 2.5 L 30.0 L
Plastic 2.5 L
2.5 L

OUTER PACKAGINGS Drums Jerricans Boxes
Type

Alu- Ply- Other Alu- Alu- Ply- Recon- Other
minium Plastic Steel minium Wood wood stituted Fibreboard Plastic metal
Desc Steel minium wood Fibre Plastic metal Steel wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
3H2 4A 4B 4C2 4D 4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Desc Aluminium Plastic
Steel Aluminium Plastic Other metal Steel Plastic
Spec. 1A1 3H1
1B1 1H1 1N1 3A1 3B1 All As permitted

PACKING INSTRUCTION 856

OPERATOR VARIATIONS: 5X-02 AY-04 BR-12 CA-10 CI-04 CX-02 CX-05 EY-03 FX-02 FX-17 JL-09 KA-02 KA-05 KE-07 LD-02 LD-06 MK-12 NH-06 OZ-08 TG-02

This instruc on applies to Class 8 liquids in Packing Group III on Cargo Aircra Only.

The General Packing Requirements of 5.0.2 must be met.
Compa bility Requirements                               

?? substances must be compa ble with their packagings as required by 5.0.2.6;

?? metal packagings must be corrosion resistant or with protec on against corrosion;

?? substances of Class 8 are permi ed in glass inner packagings only if the substance is free from hydro?uoric acid.

Closure Requirements                               

?? closures must meet the requirements of 5.0.2.7.

Addi onal Packing Requirements     

?? packagings must meet Packing Group II performance standards.

CombinaOon and single packagings are permi?ed.

COMBINATION PACKAGINGS

Inner Packaging (see 6.1) Net quantity per inner packaging Total net quantity per package

Glass 5.0 L

Metal 10.0 L 60.0 L

Plastic 5.0 L

OUTER PACKAGINGS

Type Drums Jerricans Boxes

Alu- Ply- Fibre Plastic Other Steel Alu- Plastic Alu- Ply- Recon- Fibreboard Plastic Other
Desc. Steel minium wood metal minium Steel minium Wood wood stituted metal
wood

1A1 1B1 1H1 1N1 3A1 3B1 3H1 4C1 4H1
4G 4H2 4N
Spec. 1A2 1B2 1D 1G 1H2 1N2 3A2 3B2 3H2 4A 4B 4C2 4D 4F

SINGLE PACKAGINGS

Type Drums Jerricans Composites Cylinders
Aluminium Plastic
Desc. Steel Aluminium Plastic Other metal Steel Plastic
1N1 1N2 3A1 3A2 3B1 3B2
Spec. 1A1 1A2 1B1 1B2 1H1 1H2 3H1 3H2 All As permitted in

RADIOACTIVE MATERIAL PROPER SHIPPING NAMES -
SECTION 10 IATA DGR

Table 10.4.A

UN Number Proper Shipping Name and Description

Excepted Package (10.3.11.1) a The term “fissile excepted” refers only to material
excepted under 10.3.7.2
UN 2908 Radioactive material, excepted package - empty packaging
UN 2909 Radioactive material, excepted package - articles manufactured from depleted uranium b For UN 3507, see also Special Provision A194 and
UN 2909 Radioactive material, excepted package - articles manufactured from natural thorium PI 877.
UN 2909 Radioactive material, excepted package - articles manufactured from natural uranium
UN 2910 Radioactive material, excepted package - limited quantity of material
UN 2911 Radioactive material, excepted package - articles
UN 2911 Radioactive material, excepted package - instruments
UN 3507 Uranium Hexafluoride, radioactive material, excepted package, less than 0.1kg per package, non-fissile or fissile excepted. a b

Low Specific Activity (LSA) Material (10.3.11.2)

UN 2912 Radioactive material, low specific activity material (LSA-I), non fissile or fissile-excepted a
UN 3321 Radioactive material, low specific activity material (LSA-II), non fissile or fissile-excepted a
UN 3322 Radioactive material, low specific activity material (LSA-III), non fissile or fissile-excepted a
UN 3324
UN 3325 Radioactive material, low specific activity material (LSA-II), fissile

Radioactive material, low specific activity material (LSA-III), fissile

Surface Contaminated Objects (SCO) (10.3.11.3)

UN 2913 Radioactive material, surface contaminated objects (SCO-I), non fissile or fissile-excepted a
UN 2913 Radioactive material, surface contaminated objects (SCO-II), non fissile or fissile-excepted a
UN 3326 Radioactive material, surface contaminated objects (SCO-I), fissile
UN 3326
Radioactive material, surface contaminated objects (SCO-II), fissile

Type A Package (10.3.11.4)

UN 2915 Radioactive material, Type A package, non-special form, non fissile or fissile-excepted a
UN 3327 Radioactive material, Type A package, fissile, non-special form
UN 3332 Radioactive material, Type A package, Special Form, non fissile or fissile-excepted a
UN 3333
Radioactive material, Type A package, Special Form, fissile

Type B(U) Package (10.3.11.6)

UN 2916 Radioactive material, Type B(U) package, non fissile or fissile- excepted a
UN 3328 Radioactive material, Type B(U) package, fissile

Type B(M) Package (10.3.11.6)

UN 2917 Radioactive material, Type B(M) package, non fissile or fissile- excepted a
UN 3329 Radioactive material, Type B(M) package, fissile

Type C Package (10.3.11.6)

UN 3323 Radioactive material, Type C package, non fissile or fissile-excepted a
UN 3330 Radioactive material, Type C package, fissile

Special Arrangement (10.3.12)

UN 2919 Radioactive material, transported under special arrangement, non fissile or fissile-excepted a
UN 3331 Radioactive material, transported under special arrangement, fissile

Uranium Hexafluoride (10.3.11.5)

UN 2978 Radioactive material Uranium hexafluoride, non fissile or fissile-excepted
UN 2977
UN 3507 Radioactive material, Uranium hexafluoride, Fissile
Uranium Hexafluoride, radioactive material, excepted package, less than 0.1kg per package, non-fissile or fissile excepted. a b