Cat Safety Eyewear

SAFETY EYEWEAR

Cat® Safety Eyewear

Many eye injuries occur when glasses are lifted to get a closer look – that’s why
clarity of vision through your protective eyewear is crucial.

Keep them on throughout the job!

Cat Safety Eyewear eliminates the reasons why you’d remove the frame.

Anti-fog coatings and ventilation systems, anti-scratch and easy clean are all
features that enhance your visual experience. Single hand lens angle
adjustment means you don’t have to remove the frame to alter the inclination.

As a frame is only as good as its fit and no two faces are alike, Cat frames
are ergonomically designed to flex-fit your individual facial shape. Temple
lengths and angles can be individually adjusted, and snap lock into position for
security.

Cat frames offer optimum protection. Polycarbonate lenses provide the ultimate ocular shield, locked in three directions to resist impact from front or side. Frame

materials are tested to resist chemicals and impact from particles. Cat has the comfort and style angle covered too. Looking good and feeling good in your eyewear
increases wearability. Flexible materials offer a pressure-free fit for continuous wear. Tips and bridges are non-slip. Frames are lightweight.

Cat Safety Eyewear meets and exceeds the following international standards for quality and safety:

ANSI Z87.1:2015 CAN / CSA Z94.3:15
CE EN 166:2001 AS/NZS 1337.1:2010

PLANO SAFETY RX SAFETY

DIGGER 7 PLANER 13 BARRIER 19
DOZER 8 REBEL 14 CARRIER 20
ECTOSHIELD 9 SHIELD 15 DEFENDER 21
HANDLER 10 TRACK 16 INSULATOR 22
JET 11 TREAD 17 RESISTOR 23
2 LOADER 12 VOLT 24

Lens is ultrasonically cleaned prior to fog prevention coating High comfort rubber tip composite
to maximize optical clarity Multi-length adjustment with four locking positions

Treated in a purified and strictly Rubber nose fit molded for comfort
dust-free environment

Protective brow guard injected in strong and flexible nylon - this perfect
finish resists corrosion, air pollution and continuous skin contact

Lens tested for optical and mechanical perfection, Lens locks into housing for secure impact resistance
impact and chemical resistance, high and low
temperature response, and by coating analyzer and 2.2mm polycarbonate lens material tested at velocity to shield from impact
abrasion tester to ensure quality Crystal clear optical class 1 lens for all models – distortion free vision, reduces eye fatigue
and headaches - for continuous daily use
Hard coated both sides for resistance to scratching by
fine particles, acids and solvents for ultra-clear vision

3

Protecting Your Eyes

The eye is a fragile organ – a small fleck of dust can cause conjunctivitis, a solid particle at high speed can cause a perforation of the eye, the detachment of the retina, or
permanent loss of sight.
Acute irritation of the eye and burns from chemicals and solvents can also cause partial to total loss of sight.
In the US 1000 work-related eye injuries occur every day. Over 10% of these result in a missed day of work. The majority of these come from foreign objects, blows, chemi-
cals and cuts to the eye - which are all preventable by wearing the correct safety eyewear.

Cat Safety Eyewear meets and exceeds The standards scientifically prove that all
the following international standards for Cat frames:
quality and safety:
• Withstand extreme pressures of heat and cold
CE EN 166:2001 • Resist mass impact at velocity
ANSI Z87.1:2015 • Shield against chemical splash
CAN / CSA Z94.3:15 • Provide excellence in optical quality including
AS/NZS 1337.1:2010 resilience to UV and other harmful rays

4

Cornea Muscle
Pupil Retina
Iris Crystalline lens
Optic nerve
Manufacturers mark
Symbol of conformity to EC directive Scale number of filter
Number of EN standard Manufacturer’s mark
Symbol of mechanical strength Optical class
at extremes of temperature Symbol of mechanical strength
at extremes of temperature

5

Fog prevention for optical clarity Multi-length adjustment

Precision molded for comfort

Resists chemical corrosion, A SCIENTIFICALLY-DESIGNED LIGHT & FLEXIBLE
shields from impact MAINFRAME FOR ALL-DAY COMFORT & PERFORMANCE.

PLANO SAFETY INTELLIGENT POLYMER MATERIALS ARE RESISTANT
TO WEAR, HEAT & FLEX.
CAT DURABLE PROTECTIVE EYEWEAR

6

DIGGER

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Protective brow guard injected in buff polished nylon Digger -100
• Lens inclination adjustment with snap-lock • Multi-length temple adjustment with 4 locking
ratchet mechanism positions Clear - filter category 2C-1.2
• Single wraparound 180 degree lens • High-comfort PVC tip composite Digger -104
• 2mm polycarbonate material tested at velocity • PVC nose fit molded for comfort Smoke - filter category 5-2.5
to shield from impact Digger -105
• Crystal clear optical class 1 lens recommended Weight - 26g / 0.917oz Blue Mirror - filter category 5-2.5
for continuous wear
• Fog prevention coating Universal wrap fit designed
• Hard coated both sides for resistance around different face shapes
to scratching
77
Multi position adjustable front 148mm - 160mm extendable sides
Soft molded contact points

DOZER

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Multi-length temple adjustment with 4 Dozer -100
• Four lens inclination adjustments with locking positions
snap-lock ratchet mechanism • High-comfort PVC tip composite Clear - filter category 2C-1.2
• Single wraparound 180 degree lens • Rubber nose fit soft-molded for comfort Dozer -104
• 2.2mm polycarbonate material tested at Smoke - filter category 5-2.5
velocity to shield from impact Weight - 24g / 0.846oz
• Crystal clear optical class 1 lens recommended Universal wrap fit designed
for continuous wear around different face shapes
• Fog prevention coating
• Hard coated both sides for resistance
to scratching

Four position adjustable front 148mm - 160mm extendable sides
Soft-molded contact points

8

ECTOSHIELD

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Double injection rubber temples and brow Ectoshield -100
• Lens inclination adjustment with • Multi-length temple adjustment with
snap-lock ratchet mechanism 3 locking positions Clear - filter category 2C-1.2
• 1.8mm polycarbonate material tested at • Soft touch temple tips for comfort fit Ectoshield -104
velocity to shield from impact • Soft touch vented nose piece Smoke - filter category 5-2.5
• Crystal clear optical class 1 lens recommended • Metal free hinge design
for continuous wear Universal wrap fit designed
• Fog prevention coating Weight - 27g / 0.952oz around different face shapes
• Hard coated both sides for resistance
to scratching 9

Multi- position adjustable front 159mm - 169mm extendable sides
Soft-molded contact points

HANDLER

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Double injection rubber temples Handler -100
• High wrap molded lens for upper and • Universal fit
lower protection • Soft touch temple tips for Clear - filter category 2C-1.2
• Single wraparound lens comfort fit Handler -104
• 2.2mm polycarbonate material tested at • Soft touch vented nose piece Smoke - filter category 5-2.5
velocity to shield from impact
• Crystal clear optical class 1 lens recommended Weight - 24g / 0.846oz Universal wrap fit designed
for continuous wear around different face shapes
• Fog prevention coating
• Hard coated both sides for resistance
to scratching

Soft touch contact points

10

JET Designed for small faces

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Lightweight and durable polycarbonate chassis
• 100% optical lens clarity • Designed for small faces Jet -100
• Anti-scratch protection • Ultra-lightweight wrap design for added comfort Clear - filter category 2C-1.2
Jet -104
Weight - 18g / 0.634oz Smoke - filter category 5-3.1

Lightweight polycarbonate construction Universal wrap fit designed
around different face shapes

11

LOADER

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Double injection rubber temples Loader -100
• 2.2mm polycarbonate material tested at • Universal fit
velocity to shield from impact • Soft touch temple tips for Clear - filter category 2C-1.2
• Single wraparound lens comfort fit Loader -104
• Crystal clear optical class 1 lens recommended • Soft touch adjustable nose piece Smoke - filter category 5-2.5
for continuous wear
• Fog prevention coating Weight - 29g / 1.02oz Universal wrap fit designed
• Hard coated both sides for resistance around different face shapes
to scratching

Rubber inserts

12

PLANER

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• High wrap sports style Planer -100
• 2.2mm polycarbonate material tested at • Flexible temples
velocity to shield from impact • Full front and side protection Clear - filter category 2C-1.2
• Crystal clear optical class 1 lens recommended Planer -104
for continuous wear Weight - 32.3g / 1.14oz Smoke - filter category 5-2.5
• Fog prevention coating Planer -108
• Hard coated both sides for resistance Blue Mirror - filter category 5-2.5
to scratching Planer -160
Smoke - filter category 5-2.5
Flexible temples
Universal wrap fit designed
around different face shapes

13

REBEL

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Double injection rubber temples Rebel -100
• High wrap molded lens for upper and • Universal fit
lower protection • Soft touch temple tips for Clear - filter category 2C-1.2
• 2.2mm polycarbonate material tested at comfort fit Rebel -104
velocity to shield from impact Smoke - filter category 5-2.5
• Crystal clear optical class 1 lens recommended Weight - 25g / 0.88oz Rebel -106
for continuous wear Smoke - filter category 5-2.5
• Fog prevention coating Rebel -113
• Hard coated both sides for resistance Clear - filter category 2C-1.2
to scratching Rebel -119
Clear - filter category 2C-1.2
Rubber inserts Rebel -127
Smoke - filter category 5-2.5
14
Universal wrap fit designed
around different face shapes

SHIELD

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Universal fit Shield -100
• High wrap molded lens for upper and • Polycarbonate temples
lower protection • Color coded integrated nose fit Clear - filter category 2C-1.2
Shield -104
• 2.4mm polycarbonate material tested at Weight - 26g / 0.917oz Smoke - filter category 5-2.5
velocity to shield from impact
Universal wrap fit designed
• Crystal clear optical class 1 lens recommended around different face shapes
for continuous wear
15
• Hard coated both sides for resistance
to scratching

Lightweight polycarbonate construction

TRACK

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Universal fit Track -100
• High wrap molded lens for upper and • Polycarbonate temples co-injected with soft tips
lower protection • High comfort PVC tip composite Clear - filter category 2C-1.2
• Color coded integrated nose fit Track -104
• 2.4mm polycarbonate material tested at Smoke - filter category 5-2.5
velocity to shield from impact Weight - 25g / 0.881oz
Universal wrap fit designed
• Crystal clear optical class 1 lens recommended around different face shapes
for continuous wear

• Fog prevention coating

• Hard coated both sides for resistance
to scratching

Soft molded contact points

16

TREAD

LENS SPECIFICATION FRAME CHASSIS LENS COLORS
• Flex temples with integrated cushioning system Tread -100
• Three lens inclination adjustments with • Neck cord attachment facility
snap-lock ratchet mechanism • Upper and lower eye protection, vented for Clear - filter category 2C-1.2
• 2.2mm polycarbonate material tested at air flow and fog resistance Tread -104
velocity to shield from impact • Soft touch vented nose piece Smoke - filter category 5-2.5
• Crystal clear optical class 1 lens recommended Tread -105
for continuous wear Weight - 29g / 1.02oz Blue Mirror - filter category 5-2.5
• Fog prevention coating Tread -112
• Hard coated both sides for resistance Yellow - filter category 2-1.2
to scratching
Universal wrap fit designed
Three position adjustable front Cushioned temple tips around different face shapes
Neck cord attachment point
17

Individual frame adjustment (temple area, nosepad area, tip area)
Lightweight structurally
robust stainless steel

Polycarbonate Cat side shield

Natural handfinished
acetate CAT tips

Front loading safety rim, Compared to alternative materials the
higher on inside edge benefits of polycarbonate lenses are:
for security from impact
a higher impact resistance from
Accommodates single, bifocal Flex spring hinges flying particles
and varifocal lenses more lightweight and thin aiding
your comfort
safer than all other materials and
rigorously tested using a 6mm 0.86g
ball fired at the lens at 45m/s
Cat RX safety frames can accommodate
all prescriptions for single vision, bifocal
or varifocal lenses from – 6 to +6.

RX OPTICAL SAFETY

CAT PROTECTIVE EYEWEAR IN YOUR PRESCRIPTION

BARRIER

FULL FRAME • STAINLESS STEEL • INTEGRATED SIDE SHIELD

FRAME SPECIFICATION FRAME COLORS
003 Matte Brown
• Machinery inspired detail to temples
• Durable stainless steel chassis 004 Matte Black
• Precision laser engraved logo
• Integrated side shield 005 Matte Gun
• Shatterproof PC side shields
• Fully adjustable acetate tips
• Silicone anti-slip nose pads

18 52 140

32

19

CARRIER

FULL FRAME • CP/TR90 • INTEGRATED SIDE SHIELD FRAME COLORS
104 Crystal Clear / Black
FRAME SPECIFICATION

• Non conductive - no metal parts
• Integrated side shield
• Shatterproof PC side shields
• Ultra lightweight universal fit
• Brow guard
• Rubber adjustable nose pads

18 56 132

37
20

DEFENDER

FULL FRAME • METAL • POP ON SHIELD FRAME COLORS
003 Matte Brown
FRAME SPECIFICATION
004 Matte Black
• Integral monoblock spring hinges
• Deboss temple design with precision laser engraved logo 005 Matte Gun
• Robust double bridge design
• Pop on side shield
• Shatterproof PC side shields
• Fully adjustable acetate tips
• Silicone anti-slip nose pads

17 58 140

34

21

INSULATOR

FULL FRAME • CP/PC • INTEGRATED SIDE SHIELD FRAME COLORS
100 Crystal Clear / Black
FRAME SPECIFICATION
103 Matte Brown
• Non conductive - no metal parts
• Integrated side shield 104 Matte Black
• Shatterproof PC side shields
• Ultra lightweight universal fit

16 57 140

35
22

RESISTOR

FULL FRAME • METAL • POP ON SHIELD FRAME COLORS
003 Matte Brown
FRAME SPECIFICATION
004 Matte Black
• Integral monoblock spring hinges
• Deboss temple design with precision laser engraved logo 005 Matte Gun
• Robust frame construction
• Pop on side shield
• Shatterproof PC side shields
• Fully adjustable acetate tips
• Silicone anti-slip nose pads

17 58 140

34

23

VOLT

FULL FRAME • CP/PC • INTEGRATED SIDE SHIELD FRAME COLORS
100 Crystal Clear / Black
FRAME SPECIFICATION

• Non conductive - no metal parts
• Integrated side shield
• Shatterproof PC side shields
• Ultra lightweight universal fit
• Rubber gasket
• Rubber tips
• Adjustable temple heights

18 56 121

34
24



INSPECS - UK
7-10 Kelso Place
Upper Bristol Road
Bath BA13AU - UK
Tel: +44 (0)1225 717000
Email: sales@inspecs.com
INSPECS - USA
30798 US Hwy 19N

Palm Harbor
Florida 34684 - USA
Tel: +1 (727) 771-7710
Email: sales@inspecsusa.com
Web: www.inspecs.com

www.cat.com www.caterpillar.com
©2021 Caterpillar.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Inspecs Ltd., a licensee of Caterpillar Inc.