Car Repair Products Adhesives / Tapes - soft99

Car Repair Products Adhesives / Tapes 1

00608 DIY Super Strong Double Faced Adhesive Tape for Interior Spec info.
1sheet (90x150mm)
DIY Super Strong Double Faced Adhesive Tape for Interior has extremely
strong adhesive effect which can be used for professional use. It is specially Case dimension
designed for materials such as dashboards. It is flexible to lumpy surfaces and W 256 H 122 D 206 mm
has high vibrational absorption. Best used for installing and reinforcing ETC Case weight
device, GPS base and other interior goods. 1.6 kg
Case unit
Directions 50
1. Remove dust, oil and water from the desired area and dry thoroughly. Control No.
2. Cut the tape freely as needed and put it on the part firmly. AD-608
3. Remove a release liner and set it firmly on the desired area.
* The bigger the tape dimension, the stronger the tape adhesive effect. JAN code
* A low temperature surface makes the tape's adhesive effect decrease. In that
case, heat it with a hair dryer in order to enhance its adhesive effect. ZV9H57FJUKKQKSOV4975759006084
* The adhesive effect gradually enhances as time passes. It shows its original
adhesive effect 24 hours after taping.

00609 DIY Super Strong Double Faced Adhesive Tape for Exterior Spec info.
1sheet (90x150mm)
DIY Super Strong Double Faced Adhesive Tape for Exterior has extremely
strong adhesive effect which can be used for a professional use. It is specially Case dimension
designed with high durable acrylic form for using outside. It is flexible to lumpy W 256 H 122 D 206 mm
surfaces and effectively absorbs vibrations, so it can be used for installation of Case weight
reinforcement of emblems, aero parts, etc. 1.6 kg
Case unit
Directions 50
1. Remove dust, oil and water from the desired area and dry thoroughly. Control No.
2. Cut the tape freely as needed and put it on the part firmly. AD-609
3. Remove a release liner and set it firmly on the desired area.
* The bigger the tape dimension, the stronger the tape adhesive effect. JAN code
* A low temperature surface makes the tape's adhesive effect decrease. In that
case, heat it with a hair dryer in order to enhance its adhesive effect. ZV9H57FJUKKQKTLV4975759006091
* The adhesive effect gradually enhances as time passes. It shows its original
adhesive effect 24 hours after taping.

00610 DIY Super Strong Double Faced Adhesive Tape Transparent Spec info.
1sheet (90x150mm)
DIY Super Strong Double Faced Adhesive Tape for Exterior has extremely
strong adhesive effect which can be used for a professional use. It is specially Case dimension
designed with high durable acrylic form for using outside. The transparent tape W 256 H 122 D 206 mm
adheres and reinforces without showing obviously. It effectively absorbs Case weight
vibrations, so it can be used for installing many parts despite interior or exterior. 1.6 kg
Case unit
Directions 50
1. Remove dust, oil and water from the desired area and dry thoroughly. Control No.
2. Cut the tape freely as needed and put it on the part firmly. AD-610
3. Remove a release liner and set it firmly on the desired area.
* The bigger the tape dimension, the stronger the tape adhesive effect. JAN code
* A low temperature surface makes the tape's adhesive effect decrease. In that
case, heat it with a hair dryer in order to enhance its adhesive effect. ZV9H57FJUKKQLKRV4975759006107
* The adhesive effect gradually enhances as time passes. It shows its original
adhesive effect 24 hours after taping.

00611 DIY Instant Glue Set for Plastic Spec info.
Fast-acting adhesive: 3g
The primer allows to adhere firmly. It can be used on difficult plastics such as Primer: 3g
polyethylene and polypropylene. Best used for repairing bumper, aero parts,
lamp unit, speaker, rubber part, installation parts etc. Case dimension
Directions W 428 H 205 D 121 mm
1. Make sure of cracks and defects and be sure that the desired area can fit Case weight
each other. If not, arrange the shape of the area using an abrasive sandpaper 1.5 kg
or the like. Case unit
* In case of repair, be sure the size of the parts are correct. 40
2. Remove dust, oil and water from the desired area and dry thoroughly. Control No.
3. Lightly apply the primer on the desired area. AD-611
4. Apply a small amount of the fast-acting adhesive to one side of the desired
area lineally or punctate for 20-30 seconds as soon as the primer gets dry. JAN code
* Do not allow the surface to sit for a long time after applying the primer. It may
weaken the effect. ZV9H57FJUKKQLLOV4975759006114
* It requires 30 minutes to reach a practical strength. Do not move the desired
area in the meantime.

Car Repair Products Adhesives / Tapes 2

09081 Double Faced Adhesive Tape Spec info.
20mm×2.5m
This double sided adhesive tape has strong adherence and weather resistant
abilities. As time goes by, it's adherence gets stronger. We recommend you to Case dimension
use this to attach emblems. W 330 H 240 D 220 mm
Case weight
Directions 2.5 kg
1. Remove dust, water drops or oil cleanly from the area being attached. Atelier Case unit
99 Silicone Off is convenient for that. 50
2. Cut the tape as needed, peel off the release paper and attach it, pressing it Control No.
on firmly. B-081

JAN code

ZV9H57FJUKTKSLQV4975759090816

09082 Sticker Remover Spec info.
25ml
Not only does it allow you to peel off stickers, seals, labels or tape cleanly
without any glue residue, but also it removes the residue of old glue. Case dimension
W 320 H 290 D 220 mm
Directions Case weight
1. Soak the liquid on the sticker or seal. Take off the plastic or metal of the 2.5 kg
surface in advance. Case unit
2. Leave it for 5-6-minutes and peel it off with the spatula. Heating the sticker 50
with a drier helps you peel it off more easily. Control No.
3. Wipe it off with a slightly damp towel which has been wrung out. B-082

JAN code

ZV9H57FJUKTKSMNV4975759090823

09083 Instant Jelly Glue Spec info.
3g
You can use this jelly-type instant glue even on a vertical plane or bumpy
surface and it won't drip off. You can adjust the position after attaching because Case dimension
the hardening speed is slow. W 250 H 200 D 220 mm
Case weight
Directions 1.5 kg
1. Remove dust, oil and dirt from the area being applied, and dry it well. Case unit
2. Drop a small amount of the liquid as a dot or line on one side of the item 50
being attached. Control No.
3. It will not move 30-60 seconds after attached, and it hardens completely after B-083
24 hours.
JAN code

ZV9H57FJUKTKSNKV4975759090830

09084 Rubber & Leather Glue Spec info.
40ml
It keeps the elasticity after being attached and is very convenient when
attaching something soft. A spatula is included. Case dimension
W 390 H 240 D 210 mm
Directions Case weight
1. Remove dust, oil, rust or dirt from both sides of the item being attached, and 3.5 kg
dry it well. In order to enhance its adherence, rub the surface being attached Case unit
with a sandpaper, especially when you attach it on leather or rubber. 50
2. Apply the liquid on both side of the surface evenly and dry it well for 10-30 Control No.
minutes. B-084
3. Press it on firmly until it does not come off.
JAN code

ZV9H57FJUKTKSORV4975759090847

Car Repair Products Adhesives / Tapes 3

09119 Crepe Masking Tape Spec info.
18mm×8m
This crepe tape allows you to trace curved parts or lines. It is also highly elastic,
which helps you peel it off cleanly but quickly. Case dimension
W 205 H 70 D 223 mm
Directions Case weight
1. Cover the area which you do not want to get paint on by using this tape and 9.5 kg
newspapers and so on. Case unit
2. After the paint is almost dry, pull the tape slowly to peel it off. 30
Control No.
B-119

JAN code

ZV9H57FJUKTLLTQV4975759091196

09120 Masking Tape Spec info.
18mm×18m
With this 18mm masking tape, you can protect the car from the unwanted paint
while painting or coating the car body or the glass. Case dimension
W 430 H 240 D 370 mm
Directions Case weight
1. Cover the area which you do not want to get paint on by using this tape and 9.5 kg
newspapers and so on. Case unit
2. After the paint is almost dry, pull the tape slowly to peel it off. 30
Control No.
B-120

JAN code

ZV9H57FJUKTLMKMV4975759091202

09121 Wide Masking Tape Spec info.
36mm×9m
It is very convenient to do masking in a flash around emblems or door handles.
Case dimension
Directions W 530 H 320 D 370 mm
1. Cover the area which you do not want to get paint on by using this tape and Case weight
newspapers and so on. 11.5kg
2. After the paint is almost dry, pull the tape slowly to peel it off. Case unit
30
Control No.
B-121

JAN code

ZV9H57FJUKTLMLTV4975759091219

09150 Masking Sheet Spec info.
1pc :55cm×10m
You can cover over a wide area quickly without newspaper. This specially-
treated masking sheet does not allow the paint to drip off, so it is used by Case dimension
professionals. Static electricity allows the sheet stick to the surface and is W 640 H 250 D 210 mm
hardly affected by wind, which helps you do masking quickly and easily. Case weight
4.0 kg
Directions Case unit
1. Press the edge of the sheet firmly in order to prevent the paint from soaking 50
in. Control No.
2. Cut the sheet as needed before spreading it out. B-150
3. Tape up the edge of the sheet.
JAN code

ZV9H57FJUKTLPKTV4975759091509

Car Repair Products Adhesives / Tapes 4

09164 Emblem Remover kit Spec info.
Remover :10ml
The innovative kit allows you to peel off emblem and so on cleanly with the Grip×2 / Spare thread2m
special thread when you take it off or change it.
Case dimension
Directions W 540 H 280 D 230 mm
1. Check how the emblem is attached. Case weight
2. Slip the thread with the included grip between the emblem and car surface. 2.5 kg
Hold on the grip with both hands and rub down slowly to separate the glue of Case unit
the emblem from the car surface. 50
3. Remove the glue residue remaining on the car body with the included Control No.
release agent and spatula while being careful not to damage the car body. B-164
4. Wipe the residue off with a soft cloth.
JAN code

ZV9H57FJUKTLQOQV4975759091646

09207 Dashboard Tape Spec info.
4sheets (100×25mm)
The double sided adhesive tape can adhere firmly to materials used on the
dashboard such as polypropylene (PP) or polyvinyl chloride(PVC). It allows the Case dimension
glue residue and so on to remain and prevents dashboard material from W 235 H 215 D 240 mm
damage after being peeled off. Case weight
2.0 kg
Direction Case unit
1. Remove water drops, oil or dirt from the area being attached. 50
2. Cut the tape as needed and peel off the blue release paper and then attach Control No.
what you want to attach. B-207
3. Peel off the white release paper and attach it to the surface of the
dashboard. JAN code

ZV9H57FJUKTMKRKV4975759092070

09210 Butyl Tape Spec info.
18mm×2.7m
The clay-like material which has strong adherence, allows you to use it to
anywhere. Case dimension
W 275 H 215 D 730 mm
Directions Case weight
1. Remove water drops, oil, wax or dust from the area being attached. Atelier 8.8 kg
99 Silicone Off is very convenient to remove oil. Case unit
2. Cut the tape as needed with scissors 50
3. press it on with fingers or a spatula to adhere to the surface. Control No.
4. If you need to fill in the gap or hole, you can shape it as you want and use it. B-210

JAN code

ZV9H57FJUKTMLKKV4975759092100

09220 Heatproof Crepe Masking Tape Spec info.
1pc (10mm×7m)
This is a special blended polyolefin, which fits to any complicated shape and
allows you to trace the curved parts accurately as you want. It makes the Case dimension
boundary line come out clearly, which helps you to paint accurately. It can also W 330 H 396 D 210 mm
resist heat up to 150ºC, therefore, you can use it during a baking paint. Case weight
Directions 4.3 kg
1. Cover the area which you do not want to get paint on by using this tape and Case unit
newspapers and so on. 30
2. After the paint is almost dry, pull the tape slowly to peel it off. Control No.
B-220

JAN code

ZV9H57FJUKTMMKTV4975759092209