The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by CKDESIGN, 2017-07-06 05:46:32

Olda-product-catalogue-2017_en_web

Olda-product-catalogue-2017_en_web

OLDA

door fittings
(hardware)

2017

RZ OLDA Innovation AB

Åvägen 1B, SE-435 44 Mölnlycke, Sweden
tel: +46(0)31-26 68 92
[email protected]
web: www.olda.com

VAT.No: SE 556592-7224-01
ISO 9001:2008 & ISO 14001:2004 CERTIFIED

® INNOVATION AB The company

History When OLDA® was founded 1985 in Gothenburg, Sweden, the main
business was development of special tools and equipment for Volvo Cars,
SKF and other large companies.

From July 2015, OLDA is a part of the RZ-Gruppen, a collection of companies
with different specialities - which complements each other, with different types
of machining etc.

Market The first series of door-fittings was introduced to the Scandinavian market
in 1992. Since then, the product range has constantly been expanded and
refined.
Focus on export to Europe was initiated in 1997, and today, Olda products
can be found in most of the European countries.

Business The business concept of
Concept OLDA Innovation AB is to develop and
manufacture door fittings of high
quality, at reasonable prices in the
right time.
A selection of our products.
Our strength is based on flexibility.
As a manufacturer we can offer our
“large quantity customers” different
solutions concerning our products.
An other example is that we can
offer several coatings or RAL-colours
according to request.

Activities All development and most of the
manufacturing are performed at our
facilities in Gothenburg.

In November 2016 the company
moved from Vagnmakaregatan to

Åvägen in Mölnlycke.

For distribution in Europe, we have
business-partners in the different
countries or markets. Göteborg - Sweden, ‘Vagnmakaregatan 14’.

2

® INNOVATION AB Contents

page:
The company About OLDA Innovation AB 2
Contents (this page) 3
General information Distribution- and product-information 4

Opening limiters Opening limiter 73 DS 5
Door fastener 77 DA 5
Door buffer 94 DS 5


Frame bridge Frame bridge 71 KPF 5

Door coordinators Door coordinator 25 DK 6
Door coordinator 30 DK 6
Bracket 31 DK 6


Door handles Flush ring handle 85 PM 7
86 PM 7
Flush lock handle cover

Flush bolts Guide - flush bolts and different types of doors 8

for steel- and Automatic flush bolt 26 HZ 9
aluminium-doors Automatic flush bolt 27 HZ 9

series 25 mm - Automatic flush bolt 28 HZ 10
for wooden doors Manual flush bolt 30 HZ 10

series 20 mm - Automatic flush bolt discontinued! 31 HZ-A 11
for rebated Automatic flush bolt discontinued! 31 HZ-B 11
wooden doors Automatic flush bolt 31 HZ-C 11

series 18 mm Automatic flush bolt 34 HZ 12
Semi-automatic flush bolt 35 HZ 12
Automatic flush bolt 37 HZ 13
Adjustable lock plate 19 HZ 13

series 16 mm Automatic flush bolt 39 HZ 14

series 33 HZ Automatic flush bolts 33 HZ-10F / 30F 15

series 33 HZ R32 Automatic flush bolt 33 HZA-R32F 16
Manual flush bolt 33 HZM-R32 16

43 HZ & 33 HZM Automatic flush bolt 43 HZ-32T 17
Manual flush bolt 33 HZM-32 17
Automatic flush bolt 43 HZ-20T 18
Guide- and lock-tubes - for flush bolts 18

100 HZA Automatic flush bolt 100 HZA 19

accessories Dust excluding floor sockets 17 / 18 HZ 20
special Laser marking of OLDA original products
info How to choose the right type of flush bolt? 21
22

General conditions Warranty, returns and conditions 23

3

® INNOVATION AB Information

Market
The products are in their various designs intended for
locksmiths and installation engineers, manufacturers
and assemblers of door-sets. Excellent relations over
several years with different European co-operation
partners bear witness to the company’s technical
expertise and high level of service. When developing
new products, our starting-point is the individual
customer or the needs and demands from the market.
Flexibility and experience is essential to satisfy the
special requirements of customers.

Distribution
In Sweden, sales is carried out by our nation-wide
wholesalers. Export sales follows, for each market,
national traditions.

Function
All products are delivered with those accessories that
are needed for a correct installation and function.
The purpose of recommended accessories is to secure
a correct function with a longer durability. The
durability is effected by the use and environment
which is different from case to case, recommended
interval of service is therefore regulated by these
factors.

Maintenance and Service
Several factors effect the function of the door, the
door-set and its fittings requires regular preventive
maintenance. In general, at fittings with movable
components, maintenance should be carried out at Countries in which you can find products
least two times per year. If the door-set is located in from RZ Olda Innovation AB :

an official space with high traffic, a more frequent
service is recommended. When testing the function of Austria Ireland
movable parts, greasing is recommended. Belgium Netherlands

Czech Republic Norway
Denmark Poland
Approval Estonia Portugal
Fittings are tested for approval according to different
standards and norms, but in the end it is always the Finland Slovakia
customer who approves if the product fulfil the needs France Spain
and demands in question. Work is being carried out to Germany Sweden
adapt national standards into European standards. Hungary Switzerland
To be able to CE-mark a product, a EU standard Iceland United Kingdom
also needs to be ”harmonized”, which currently the
standard for flush bolts is not.

Terms and conditions
See page 23.

Questions
Please contact us at RZ Olda Innovation AB
for further information:
tel: +46-(0)31-26 68 92
e-mail: [email protected]
web: www.olda.com

4

® INNOVATION AB Opening limiters & Frame bridge

Opening limiter OLDA 73 DS frame
Fitted on hinge side at the top of the door frame. door leaf
Fastening function is obtained with accessory 77 DA.
to the centre of the hinge
Suits both left- and right-hung door-leaves. screws are included
Material: steel
Colour / Art.No: white : 471014173/WT Holding force: approx. 25 Nm
grey : 471014173/GR screws are included
Length: 185 mm
Door leaf width: max 930 mm screws are included

Adjustable opening angle: 90° - 130°
opening angle: 90° 100° 115°
A-measurement: +45 +22 -10

Door fastener OLDA 77 DA
Accessory for 73 DS, when fastening function
is required. Fitted on the door leaf.

Material: steel
Colour / Art.No: white : 471014277/WT
grey : 471014277/GR
Suits both left- and right-hung door-leaves.
77 DA is equipped with a rubber wheel with
steel core, which results in an elastic performance
with a longer durability.

Door buffer OLDA 94 DS
Fitted on wall or floor.
For inside, side hung or sliding doors.

Material: steel
Colour: white : 471014194/WT
grey : 471014194/GR

Frame bridge OLDA 71 KPF
For concealed drawing of electric cable from
frame to door leaf.

Material: steel & zinc
Coating: galvanized
Art.No: 471014871
Diameter of cable: max Ø 6 mm

Including return spring!
Not recommended together with high hinges.

screws are included

5

® INNOVATION AB Door coordinators and accessories

Function of door coordinator devices on double-leaf door-sets:
* the active door-leaf is prevented from closing by the lock-head of the coordinator
* hence, the passive door-leaf closes first
* and the coordinator releases the active door-leaf
* and both the door-leaves have been closed in the correct order.

active door-leaf: the door-leaf normally used for passage
passive door-leaf: the door-leaf normally not used for passage

Door coordinator OLDA 25 DK
Prevents the door-leaves at double-leaf door-sets
from closing in the incorrect order.

25 DK is fitted on the top of the frame and suits both
left- and right-hung door-leaves.

Material: steel strike bracket, support bracket and
Colour / Art.No: white : 471014425/WT screws are included
grey : 471014425/GR
protection plates for door-leaves and
Door coordinator OLDA 30 DK-850/1150 screws are included
Prevents the door-leaves at double-leaf door-sets
from closing in the incorrect order. 30 DK suits both additional
profile
left- and right-hung door-leaves and is fitted under
the top of the frame or with accessory 31 DK on the
rear side of the top of the frame. The coordinator is
available in two lengths (see chart).
Depth: 40 mm. Height: 20 mm.

Improved product! - Now with spring-loaded lock-head.

Material: steel

Colour/Coating alt. 1: grey
Art.No: 471014430-850/GR
471014430-1150/GR

Colour/Coating alt. 2: galvanized
Art.No: 471014430-850/GALV
471014430-1150/GALV

chart for choice of length of coordinator: 1530 2130
for frame-width up to (mm) : 16 M 22 M
-responds to frame module : 850 1150
choose coordinator (with “A-measurement”) : 950 1250
approx. total length of product :

Additional profile DK
Used to extend the coordinator (up to 1 meter) to
the cover the full frame width.

Colour/Coating alt. 1: grey Art.No: 471014439/GR
Colour/Coating alt. 2: galv. Art.No: 471014439/GALV

Bracket OLDA 31 DK bracket
Accessory when coordinator 30 DK is fitted on the
rear side of the frame. frame

Material / Coating: aluminium / anodized coordinator
Art.No: 471014431

6

® INNOVATION AB Door handles

Sliding door fittings
We are proud to now also be able to offer fittings for sliding doors.
In this series is a ring handle, 85 PM and a cover for lock handles, 86 PM
- both for recessed fitting.

Flush ring handle OLDA 85 PM 68,5 11,5 8x8
For sliding doors. 56 2 Ø15
85 PM is for recessed fitting. Ø60
Is delivered with a pre-fitted carrier 68,5
shaft, 8x8 mm, for connection to a lock. 19 56
68,5
Material: steel 56 2
Coating: zinc plated screws are included
Art.No: 471014785
Ø43
Flush lock handle cover OLDA 86 PM Ø60
For sliding doors.
86 PM is fitted recessed, together with a 56
suitable lock handle. 68,5

Material: steel screws are included
Coating: zinc plated
Art.No: 471014786

7

® INNOVATION AB Flush bolts

Guide - OLDA flush bolts for different types of doors.
There are many different type of doors, with regards to function, material and design.
Below you can find a chart which gives guidance in the choice of OLDA flush bolt.

OLDA flush bolts OLDA 26 HZ
OLDA 27 HZ
OLDA 28 HZ
OLDA 30 HZ
OLDA 31 HZ-A
OLDA 31 HZ-B
OLDA 31 HZ-C
OLDA 34 HZ
OLDA 35 HZ
OLDA 37 HZ
OLDA 39 HZ
OLDA 33 HZ-10F
OLDA 33 HZ-30F
OLDA 33 HZA-R32F
OLDA 33 HZM-R32
OLDA 43 HZ-32T
OLDA 33 HZM-32
OLDA 43 HZ-20T
OLDA 100 HZA

door material suitable for wooden doors ✽✽✽✽✽✽ ✽ ✽ ✽ ✽✽ ✽

suitable for steel profiles ✽✽ ✽✽ ✽ ✽ ✽✽✽✽✽✽✽✽✽

suitable for aluminium profiles ✽✽ ✽✽ ✽ ✽ ✽✽✽✽✽✽✽✽✽

manual ✽ ✽✽

function semi automatic ✽

automatic ✽ ✽✽ ✽✽✽✽ ✽ ✽✽✽✽ ✽ ✽✽

bolt backset 21-66 40 12 12 10 10 10 11 3-19 3-19 11 10 30 32 32 32 32 20 -

bolt Ø 44x10 12 10 10 10 10 12 12 15x17 15x17 10 12 12 12 12 12 12 12 14

bolt bolt not spring loaded (T) ✽ ✽✽✽✽✽ ✽ ✽✽✽✽✽

bolt spring loaded (F) ✽ ✽ (✽) ✽✽✽✽

bolt adjustable height ✽✽✽✽✽ ✽✽✽✽✽✽✽ ✽

bolt in stainless steel ✽✽✽✽

forend round ✽ ✽✽✽✽ ✽✽ ✽ ✽ ✽✽ ✽✽

forend / dimensions forend square ✽ ✽✽✽ ✽✽

forend width 25 25 25 25 20 20 20 18 18 18 16 24 24 22 22 22 22 24 24

forend height 78 98 168 168 160 160 160 190 190 190 188 193 193 200 200 200 200 200 136

forend thickness 2,5 2,5 2 2 2 2 2 3 3 3 3 2 2 2 2 2 3 2 2,5

forend depth 88 40 50 50 50 50

product depth / fits in profile depth 68 50 20 20 20 20 20 23 23 23 23 20 20 42 40 40 40 36 42

8

® INNOVATION AB Flush bolts

Flush bolts
Fitted as a locking device on double-leaf door-sets on the passive door-leaf.
(The passive door-leaf is the one normally not used for passage.)

Manual flush bolt
Both release and locking of the passive door-leaf is made manually.
All our manual flush bolts is operated by a lever-mechanism.

Automatic flush bolt
Release of passive door-leaf is done automatically, when the active door-leaf is opened, and the
falling latch is released. Locking is obtained automatically when active door-leaf closes, when
the falling latch is pushed in and thereby activates the bolt.
Automatic flush bolts is often recommended where fire-proof demands exists.

Semi-automatic flush bolt
Release of passive door-leaf is done manually. Locking is obtained automatically when passive door-leaf closes.
The bolt is constantly activated, which means that this flush bolt can only be fitted at the top of the
passive door-leaf.
Recommended as a complementary product where an automatic flush bolt is installed at the bottom of
the passive door-leaf. This installation results in an easy made manual releasing sequence and a secure
locking sequence in two steps, which also contributes to a smoother closing of the door-set.

Recommended accessory for our flush bolts: Dust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 26 HZ The flush bolt on the picture are “type 1“
Automatic locking sequence of passive door-leaf. The flush bolt on the picture are “type 2“
Recessed fitting up and/or down in passive door-
leaf made of steel- or aluminium-profiles without
joint-edge. Falling latch is reversible but is
ordered pre-assembled “left” or “right” - see
page 22. Width of the product is 25 mm.
26 HZ is not equipped with spring-loaded function

Material: steel
Coating: zinc plated
Art.No: type 1 (L) 471014426-1
type 2 (R) 471014426-2

Also available in acid proof stainless steel! strike-plate, lock-plate and screws are included
- please contact us!

Automatic flush bolt OLDA 27 HZ
Automatic locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door-leaf
made of steel- or aluminium-profiles with or
without joint-edge. Fits in profile with depth 50
mm. Falling latch is reversible but is ordered pre-
assembled “left” or “right” - see page 22.
Width of the product is 25 mm.
The bolt (Ø=12 mm) is vertically adjustable and is
not equipped with spring-loaded function.

Material: steel strike-plate, guide- & lock-tube and screws are included
Coating: zinc plated
Art.No: type 1 (L) 471014427-1 9
type 2 (R) 471014427-2

® INNOVATION AB Flush bolts

Flush bolt Series 25 mm (width of lock-pillar)
The flush bolts in this series are mainly designed for wooden
double-leaf door-sets. Both flush bolts have the same
measurements (25 x 20 x 168 mm), which means that they fit the
same cut-out in a door-leaf.
This series consists of the automatic flush bolt 28 HZ and the
manual 30 HZ.
Accessory: Dust-excluding floor socket 17 HZ (see page 20).

The falling latch on several of our automatic flush bolts are our patented, low-friction latch
which considerably decreases the force needed when the door-set is closing.
It is the 28 HZ, series 31 HZ, series 33 HZ, 34, 37 and 39 HZ which are equipped with this latch.

Automatic flush bolt OLDA 28 HZ The flush bolt on the picture are “type 1“

Automatic locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door-
leaf made of wood. The bolt (Ø=10 mm) is not
equipped with a spring-loaded function and is
vertically adjustable. The width of the product
is 25 mm. Falling latch is not reversible, see
illustration on page 22.

Material: steel 47101428-1
Coating: zinc plated 47101428-2
Art.No: type 1 (L)
type 2 (R)

strike-plate, lock-plate and screws/nails are included

Manual flush bolt OLDA 30 HZ lock-plate and screws are included
Manual locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door-
leaf made of wood.
The bolt (Ø=10 mm) is vertically adjustable.
The width of the product is 25 mm.

Material: steel
Coating: zinc plated
Art.No: 47101430

10

® INNOVATION AB Flush bolts

Flush bolts Series 20 mm (width of lock-pillar) - 31 HZ
This series consists of three automatic flush bolts, mainly designed for rebated
double-leaf door-sets made of wood. They all have the same measurements
(20x20x160 mm.) but are designed for different cut-outs and fitting.
Accessory: Dust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 31 HZ-Astrike-plate, lock-plate andThe flush bolt on the picture
Automatic locking sequence of passive door-leaf.screws/nails are includedare “type 1“
Recessed fitting up and/or down in passive door-
leaf (also rebated), made of wood. 31 HZ-A isstrike-plate, lock-plate andThe flush bolt on the picture
designed for a cut-out made with an end-cutter.screws/nails are includedare “type 1“
The bolt (Ø=10 mm) is not equipped with
a spring-loaded function and is verticallystrike-plate, lock-plate andThe flush bolt on the picture
screws/nails are included are “type 1“
discontinuedadjustable. The width of the product is 20 mm.

Falling latch is not reversible, see illustration on
page 22.
Material: steel
Coating: zinc plated
Art.No: type 1 (L) 47101431-1A
type 2 (R) 47101431-2A
Automatic flush bolt OLDA 31 HZ-B
Automatic locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door-
leaf (also rebated), made of wood. 31 HZ-B is
designed for a cut-out made with an side-milling
cutter. The bolt (Ø=10 mm) is not equipped
with a spring-loaded function and is vertically

discontinuedadjustable. The width of the product is 20 mm.

Falling latch is not reversible, see illustration on
page 22.
Material: steel
Coating: zinc plated
Art.No: type 1 (L) 47101431-1B
type 2 (R) 47101431-2B

Automatic flush bolt OLDA 31 HZ-C
Automatic locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door-
leaf (also rebated), made of wood or steel- or
aluminium-profiles without joint-edge. 31 HZ-C is
designed for a cut-out made with an end-cutter.
The bolt (Ø=12 mm) is equipped with a spring-
loaded function and is not vertically adjustable.
The width of the product is 20 mm. Falling latch
is not reversible, see illustration on page 22.

Material: steel
Coating: zinc plated
Art.No: type 1 (L) 47101431-1C
type 2 (R) 47101431-2C

11

® INNOVATION AB Flush bolts

Flush bolts Series 18 mm (width of lock-pillar)

This series consists of three flush bolts, mainly intended for rebated
double-leaf door-sets made of wood, steel- or aluminium-profiles
without joint-edge. The flush bolts have the same measurements
(18x23x190 mm), which means that they all fit the same cut-out in a
door-leaf, made with and end-cutter.
Accessory for 34 HZ : Dust-excluding floor socket 17 HZ (see page 20).
New product in the series: 37 HZ - for improved safety! (See next page.)

Automatic flush bolt OLDA 34 HZ

Automatic locking sequence of passive door-leaf. strike-plate, lock-plate and
Recessed fitting up and/or down in passive door- screws/nails are included
leaf. The bolt (Ø=12 mm) is equipped with a
spring-loaded function. The flush bolt on the picture are “type 2“

The width of the product is 18 mm.

Falling latch is not reversible, see illustration on
page 22.

Material: steel 47101434-1
Coating: zinc plated 47101434-2
Art.No: type 1 (L)
type 2 (R)

Semi-automatic flush bolt OLDA 35 HZ

The reversible bolt (17x15 mm) is always Lock-plate and screws are included
activated, which means that this flush bolt only
can be fitted at the top in the passive door-leaf. The flush bolt on the picture are “type 1“
Recommended as a complementary product,
where automatic flush bolt 34 HZ, has been accessory: protective plate
fitted at the bottom in the passive door-leaf. (recommended for wooden doors)
The width of the product is 18 mm.

Material: steel 47101435-1
Coating: zinc plated 47101435-2
Art.No: type 1 (L)
type 2 (R)

35 HZ is ordered pre-assembled as “type 1” or
“type 2” - see page 22.
For more information about the semi-
automatic function, please see page 9.

12

® INNOVATION AB Flush bolts

Flush bolts Series 18 mm (width of lock-pillar) 19 HZ

This series consists of three flush bolts, mainly intended for rebated
double-leaf door-sets made of wood, steel- or aluminium-profiles without
joint-edge. The flush bolts have the same measurements (18x23x190 mm),
which means that they all fit the same cut-out in a door-leaf, made with
and end-cutter.
New products in the series: 37 HZ - for improved safety!
and the recommended accessory: 19 HZ - adjustable lock plate.
See previous page for the other products in this series!

Automatic flush bolt OLDA 37 HZ 25
Automatic locking sequence of passive door-leaf. 17
Recessed fitting up and/or down in passive door-
leaf. The bolt (17x15 mm) is not equipped with a 50
spring-loaded function. The width of the product
is 18 mm. Falling latch is not reversible, see
illustration on page 22.

This flush bolt facilitates easier opening of 40
double doors at emergency escapes, by 60
reducing the friction between the bolt and
frame or lock plate. screws are included
Additionally it has a ”hold close” function
which is desired for fire, smoke and
soundproof doors.

Material: steel 47101437-1
Coating: zinc plated 47101437-2
Art.No: type 1 (L)
type 2 (R)

Adjustable lock plate OLDA 19 HZ 37 HZ The flush bolt on the picture are “type 2“ strike plate and screws/nails are included
Recommended accessory for 37 HZ.
Recessed fitting in frame or sill/floor.

This lock plate is adjustable after fitting,
which is especially useful on large or older
doors, but it also contributes to the ”hold close”
function of flush bolt 37 HZ.

Material: steel
Coating: zinc plated
Art.No: 471014419
Customized shape of the receiving hole,
for different bolts is possible.

13

® INNOVATION AB Flush bolts

Flush bolt 39 HZ - 16 mm (width of lock-pillar)

Mainly intended for rebated double-leaf door-sets made of wood, steel-
or aluminium-profiles without joint-edge.
Dimensions: (16x23x190 mm).
Accessory for 39 HZ : Dust-excluding floor socket 17 HZ (see page 20).
New product!

To meet the demand, mainly from manufacturers of aluminium-, and
PVC-door profiles and also rebated doors, OLDA has developed a new
product with only 16 mm forend width.

Automatic flush bolt OLDA 39 HZ strike-plate, lock-plate and
screws/nails are included
Automatic locking sequence of passive door-leaf.
Recessed fitting up and/or down in passive door- The flush bolt on the picture are “type 1“
leaf.

The bolt (Ø=10 mm) is equipped with a
spring-loaded function.

The width of the product is 16 mm.

Falling latch is not reversible, see illustration on
page 22.

Material: steel 47101439-1
Coating: zinc plated 47101439-2
Art.No: type 1 (L)
type 2 (R)

14

® INNOVATION AB Flush bolts

Flush bolts Series 33 HZ
These automatic flush bolts, are mainly designed for double-leaf door-sets made of steel- or
aluminium-profiles.
In this series are flush bolts with two different depths (back-set) of the bolt, 10 mm and 30 mm.
The forend, with dimensions 24 x 193 mm, are in brushed stainless steel.
Accessory: D ust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 33 HZ-10F strike plate, lock tube and screws are included 20
Automatic locking sequence of passive door-leaf. 20
Recessed fitting up and/or down in passive
door-leaf made of steel or aluminium without Ø 22
joint-edge.
The bolt (Ø=12 mm) is placed 10 mm from the The flush bolt on the picture are “type 2“ Ø 12,5
back of the forend, is equipped with a 10
spring-loaded function and is vertically
adjustable. Falling latch is not reversible, see 15
illustration on page 22. 88

Material: steel / stainless steel (forend) 22
Coating: zinc plated
type 1 (L) 47101433-1/10F 15
Art.No: type 2 (R) 47101433-2/10F 149


At reasonable order volumes, these products
are available without the spring-loaded function

- please contact us for further information!

Automatic flush bolt OLDA 33 HZ-30F strike plate, guide tube, lock tube 20 The flush bolt on the picture are “type 1“
Automatic locking sequence of passive door-leaf. and screws are included 20
Recessed fitting up and/or down in passive
door-leaf made of steel or aluminium with or Ø 22
without joint-edge. 30
The bolt (Ø=12 mm), is placed 30 mm from the
back of the forend, is equipped with a 15
spring-loaded function and is vertically 88
adjustable. Falling latch is not reversible, see
illustration on page 22.

Material: steel / stainless steel (forend) 22
Coating: zinc plated
type 1 (L) 47101433-1/30F
Art.No: type 2 (R) 47101433-2/30F


At reasonable order volumes, these products 15
are available without the spring-loaded function 149

- please contact us for further information!

15

® INNOVATION AB Flush bolts

Flush bolts Series 33 HZA/M-R32
This series of flush bolts, are mainly designed for double-leaf door-sets made of wood, steel- or
aluminium-profiles. Both products can fit in the same cut-out.
An extended bolt (Ø12x60) makes these products prepared to work with automatic drop seals.
Bolts are also available in, for example, Ø8 and Ø10 mm.

The forend, with dimensions 22 x 200 mm, are made of brushed stainless steel and have
round corners.

Accessory: Dust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 33 HZA-R32F strike plate, guide tube, lock tube The flush bolt on the picture are “type 1”
Automatic locking sequence of passive door-leaf. and screws are included
Recessed fitting up and/or down in passive
door-leaf made of wood, steel- or aluminium-
profiles. The bolt (Ø=12x60 mm) is placed 32 mm
from the back of the forend, is equipped with a
spring-loaded function and is vertically
adjustable. Falling latch is not reversible, see
illustration on page 22.

Material: steel / stainless steel (forend)
Coating: zinc plated
type 1 (L) 47101433-1/R32F
Art.No: type 2 (R) 47101433-2/R32F


At reasonable order volumes, this product
is available without the spring-loaded function

- please contact us for further information!

Manual flush bolt OLDA 33 HZM-R32 guide tube, lock tube and screws are included
This manual flush bolt, operated by a lever, has
the same areas of use as 33 HZA-R32F.
33 HZM-R32 can be used as a manual
complement to that product.
The bolt (Ø=12x60 mm) is placed 32 mm from the
back of the forend and is vertically adjustable.

Material: steel / stainless steel (forend)
Coating: zinc plated

Art.No: 47101433/R32M
At reasonable order volumes, this product is available

with the bolt at a different depth (back-set),
(for example 10 or 20 mm instead of 32 mm)
- please contact us for further information!

16

® INNOVATION AB Flush bolts

Flush bolts 43 HZ & 33 HZM
This series of flush bolts, is mainly intended for double-leaf door-sets
made of wood, steel- or aluminium-profiles.
The automatic 43 HZ-32T and the manual 33 HZM-32 can fit in the same
cut-out.

Accessory: Dust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 43 HZ-32T strike plate, guide tube, lock tube 20 Ø 22
and screws are included 20 32
For automatic locking sequence of passive door- The flush bolt on the picture are “type 2“ Ø12
leaf on double-leaf door-sets made of
wood, steel- or aluminium-profiles. 200 70 15
Recessed fitting up and/or down in passive door-leaf. 88
The bolt (Ø12 mm) is placed 32 mm from the
back of the forend, is not equipped with a spring-
loaded function and is vertically adjustable.
43 HZ has a reversible latch but is ordered pre-
assembled “left” or “right” - see page 22.

Material: steel 47101443-1 20 15
Coating: zinc plated 47101443-2 160
Art.No: type 1 (L) 40
type 2 (R) 22 2

Also available in a version where the forend has
round corners and the bolt back-set is 20 mm.
- see next page.

At reasonable order volumes, this product
is available with a spring-loaded function
- please contact us for further information!

Manual flush bolt OLDA 33 HZM-32 guide tube, lock tube and screws are included 20 Ø 22
This manual flush bolt, operated by a lever, has 20 32
the same areas of use as 43 HZ. 33 HZM can be Ø12
used as a manual complement to that product.
The bolt (Ø=12 mm) is placed 32 mm from the 200 70 10
back of the forend and is vertically adjustable. 83

Material: steel 20 10
Coating: zinc plated 40 170
Art.No: 47101433/32M
22 3
At reasonable order volumes, this product is available
with the bolt at a different depth (back-set),
(for example 10 or 20 mm instead of 32 mm)
- please contact us for further information!

17

® INNOVATION AB Flush bolts

Flush bolt 43 HZ-20T
This series of flush bolts, is mainly intended for double-leaf door-sets
made of wood, steel- or aluminium-profiles.

Accessory: Dust-excluding floor socket 17 HZ (see page 20).

Automatic flush bolt OLDA 43 HZ-20T 20
20
For automatic locking sequence of passive door-
leaf on double-leaf door-sets made of strike plate, guide tube, lock tube TFXH 3,5 x 16 (3x)
wood, steel- or aluminium-profiles. and screws are included
Recessed fitting up and/or down in passive door-leaf. The flush bolt on the picture are “type 1“ 20 Ø 22
The bolt (Ø12 mm) is placed 20 mm from the Ø12 20
back of the forend, is not equipped with a spring- 200 70
loaded function and is vertically adjustable. 15
43 HZ has a reversible latch but is ordered pre- 88
assembled “left” or “right” - see page 22.
Material: steel TFXH 3,5 x 16 (2x) 20
Coating: zinc plated
Art.No: type 1 (L) 47101443-1/20T DIN7982 FXS 4,2 x 16 (2x) 15
type 2 (R) 47101443-2/20T 160
Also available in a version where the forend has
straight corners and the bolt back-set is 32 mm 40
- see previous page. 24 2

At reasonable order volumes, this product is available with 55 18 2
a spring-loaded function
- please contact us for further information! Ø22

Guide tubes
and
Lock tubes

Accessory for flush bolts intended for doors 22 22
mainly made of aluminium- or steel-profiles.
When necessary, the guide tube (circular hole) A WxH
can be fitted in the door-leaf and the lock tube
(oval hole) in the frame/sill. Art.No: 14436-00 A = Ø 10,5 Art.No: 14435-00 W=13 H=17
Material: zinc Art.No: 14435-90 W=17 H=13
Coating: zinc plated Art.No: 14439-00 A = Ø 12,5 Art.No: 14437-00 W=11 H=15
Art.No: 14437-90 W=15 H=11
18 Art.No: 14445-00 A = Ø 14,5 Art.No: 14444-00 W=15 H=17
Art.No: 14444-90 W=17 H=15

® INNOVATION AB Flush bolts

Frame bolt 100 HZA - Next generation OLDA automatic flush bolts

In door systems with demanding fire proof requirements, a flush bolt can sometimes
weaken the fire resistance to an undesired extent.

Beacuse of this, OLDA has developed 100 HZA which is fitted in the door frame above the
door leaves. It works like a regular flush bolt, the active door activates a latch which
bolts the already closed passive door.

Minimal cut-out in the passive door leaf and easy fitting are some of the advantages.

The flush bolt on the picture are “type 1”

Automatic flush bolt OLDA 100 HZA strike plate, lock tube and screws are included 45

For automatic locking sequence of passive door- 20 100 38,5
leaf on double-leaf door-sets made of steel- or 24
aluminium-profiles. 136
Fitting in the frame above the door-leaves.
The bolt (Ø14 mm) is not equipped with a spring- 19
loaded function and is vertically adjustable.
100 HZA has a reversible latch but is ordered pre-
assembled as type 1 or type 2 - see page 22.
New product!
Material: steel
Coating: zinc plated
Art.No: type 1 (L) 471014100-1
type 2 (R) 471014100-2

To receive an additional locking point in the
bottom of the door leaf, an automatic flush bolt
OLDA 27 HZ, 33 HZ, 34 HZ or 43 HZ could be
used.

® INNOVATION AB Floor sockets

Dust-excluding floor socket OLDA 17 HZ 60 35 3

Recommended accessory for door-sets with Ø18
high frequency of passage. Where a flush bolt Ø13
is fitted in the bottom of the door-leaf, 17 HZ
prevents dust and grit from blocking a correct 45 2,5
locking sequence. This version of the 17 HZ has a 20
spring-loaded opening with diameter 13 mm.
Material: steel, stainless steel spring
Coating: zinc plated
Art.No: 471014417

screws are included

Dust-excluding floor socket OLDA 17 HZ-R Ø45

Recommended accessory for door-sets with Ø20
high frequency of passage. Where a flush bolt alt. Ø16
is fitted in the bottom of the door-leaf, 17 HZ-R
prevents dust and grit from blocking a correct Ø16
locking sequence. These versions of the 17 HZ alt. Ø13
have a spring-loaded opening with diameter 13
mm or 16 mm and are made of stainless steel.

Material: stainless steel, screws are included
stainless steel spring
Art.No: 471014417-13R (Ø13)
471014417-16R (Ø16)

Adjustable dust-excluding floor socket 42 2
OLDA 18 HZ

This product is especially suitable for when there Ø28
could arise a need for adjustment of the position of Ø13
the hole, after fitting, for example if the shape of the Ø22
door changes by time. But also to facilitate the fitting
in for example fragile or expensive materials where hole Ø13 adjustable
possible incorrect fitting and necessary re-fitting, of a within diameter Ø22
traditional floor socket, would leave visible damage to fit with appropriate joining compound
the floor/sill.

Recommended accessory for door-sets with
high frequency of passage. Where a flush bolt
is fitted in the bottom of the door-leaf, 18 HZ
prevents dust and grit from blocking a correct
locking sequence. 18 HZ has a spring-loaded opening
with diameter 13 mm.
Patent applied product!

Material: steel
Coating: zinc plated
Art.No: 471014418

20

® INNOVATION AB Special

Laser marking
To make it easier to identify an OLDA product,
we have decided to begin gradually to mark our products.
For this, we have constructed a special equipment for
laser marking.

Warning for illegal copies of our products!
It has emerged copies of inferior quality, both locally and
in the rest of Europe. Most original OLDA flush bolts is
today marked with our logo, product name (i.e. 28 HZ)
and manufacturing year.
Please feel free to contact us if you wish to be sure
that you are dealing with OLDA original products!

Extended bolts
When flush bolts are fitted in door sets where different
mouldings or sills demand a certain distance between
door-leaf and frame, an extended bolt can often be the
solution. Please contact us!

Customized solutions and prototypes
When our larger customers require special solutions
for a certain project or door system, we often ask
our own CNC experts for their services. They have
the latest CAM-technology available to them.
This department within Olda Innovation AB have
many years experience of developing prototypes
and smaller production series for the automotive
industry etc.

Quality and environment
At Olda Innovation, quality and
environment issues are always
included as a natural component
in the production process.
We are certified according to
ISO 9001:2008 and ISO 14001:2004
The pictures to the left are showing a part
of the welding department and the fittings
assembly department.

21

® INNOVATION AB

How to choose the right type of flush bolt ?

OLDA automatic and semi-automatic flush bolts are
ordered and fitted according to the following:

left door-leaf is passive:

2
1

Choose flush bolt type2 for top fit and type1 for bottom fit.

right door-leaf is passive:

1
2

Choose flush bolt type1 for top fit and type2 for bottom fit.
The “passive” door-leaf is the one normally not used for passage.
(The bolt on flush bolts OLDA 26 HZ, 27 HZ, 35 HZ, 43 HZ and 100 HZA are possible
to reverse direction of, before fitting. But most customers prefer to receive the

desired version at delivery.)
(Note: In the past we have called type1 for “left” and type2 for “right”.)

22

® INNOVATION AB General conditions

Quality Precision-cast steel components, manufacturing according to explicit
limit of tolerance, skilled personnel and rigorous testing, ensures that
our products meets the demands from customers and authorities
considering function, durability and life cycle.

Flexibility Our strength is based on flexibility. As a manufacturer we can offer
our “large quantity customers” different solutions concerning
the construction of our products.
An other example is that we can offer several coatings or RAL-colours
according to request.

Service RZ OLDA Innovation AB recommends test of function and system 1-2
times per year. In high frequency areas, demanding environments
or when specific requirements exists, testing should be carried out more
frequently. Test, lubricate and if necessary adjust movable parts.

Warranty All mechanical products includes 3 years warranty from the date of
issuance of invoice in question.

Packing Where no instruction for packaging has been specified, all products are
packaged separately, with mounting instructions and including accessories,
in plastic bags or in boxes. All products are delivered with EAN-code.

Terms of delivery See current price list.
and payment
RZ OLDA Innovation AB’s business concept is to offer high quality fittings
Prices with unique functions at reasonable prices. Further information
regarding prices are obtained through our current price list.


Return of goods Return of goods has to be approved by RZ OLDA Innovation AB.
For approval, returned products has to be in intact condition, with all
included accessories packaged in the unopened original packing.
Amount for approved returned goods are deducted with 25% in credit.
Return after due day of invoice is not accepted.

Product We are continuously developing our products to further improve quality,
development durability and function. Furthermore, new products are introduced on
a regular basis to meet the demand of the market. This means we have to
reserve ourselves for the possibility that the product range and
technical data regarding the products might change.

23

www.olda.com


Click to View FlipBook Version