flute

​ The Flute 

By Du DInh    
 
 
 
 
 
 
 
 

TABLE OF CONTENTS 
 

Description………………...pg 1 
 
Sequence ……………………………..pg 2  
 
Compare and contrast……………….pg 3 
 
Problem and solution…………...pg 4 
 
Cause and Effect…………………………………...pg 5 
 
 

  
 
 
 
 
 
 

 
 
 

D​ ESCRIPTION  
 

Also, it is played vertically rather than horizontally 
and has a double (enclosed) mouthpiece, rather than a 
'hole' that you blow over to make the tone. It can be 
made out of bone, metal, or wood. A fragment of a 
thigh bone containing two holes, discovered in Slovenia in 
1995, is believed by some scientists to be part of a 
flute used by Neanderthals more than 43,000 years ago. 
And later appeared in India, China, and Japan. Most 
flutes are made of metal. In historical times, China 
would make its flute out of bamboo.  
 
 

  
 
 
 
 
  

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

​SEQUENCE  

 

First, find a flute to practice. You can rent from 
the music store or simply, purchase your own. Next, 
Put the flute parts together. Practice on blowing the 
flute until you get a pitch. When playing the flute, you 
must sit up straight. You cannot bend over/down. After 
that, learn how to hold a flute. Hold the flute and place 
your lips on the mouth hole and the instrument pointing 
to your right-hand side, in a vertical line. Lastly, play 
some notes and start performing songs but also, keep 
training 20 minutes every day to become an excellent 
flutist.  
 
 

 
 
 
 
 
 

 
 
 

 
 
 
 
 
 
 
 
 

 
 

​ compare and contrast  

 

Recorder flutes are very different from a 
standard classical flute. And additionally, it is played 
vertically rather than horizontally and has a double 
mouthpiece, rather than a 'hole' that you blow over to 
make the tone. It is way easier to play a recorder than 
a flute. It's not expensive to buy a recorder while a 
flute it's pretty expensive. They can both be made out 
of bone. This can take you about 2-4 weeks to play a 
recorder and learn all of the notes and it takes almost 
months or years to master the flute.   
 
 

 
 
 
 
 
 
 
 
 
  

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

​ Problem and solution  

 

Cleaning your flute is important. Your flute needs to 
be properly cleaned and cared for to remain in good 
condition. It is extremely important that you clean your 
flute after each use. If you don't clean your flute, it can 
get rusty and the tune and sound wonky. If this does 
occur, here are some ways to clean them. unscrew all 
the pieces. ext, use a cloth and clean the flute gently. 
then, attach the cloth to the cleaning rode and insert the 
rod into each section of the flute. Remove the moisture 
inside the flute, by lightly inserting the cleaning rod into a 
section of the flute. you will need to clean inside the 
head-joint, foot-joint, and body of the flute. The cloth 
will absorb and remove any moisture inside. Though do 
not clean the keypads cause it can damage it.  
 

 
 

 
 

 
 
  
 
 
 
 
 
 
 
 
 

 
 
 
 
 

​ Cause and effect  

 
A dominant thing for a flute is the pieces. If you bend 

any parts of the metal, it can be harder to play. First off, it 
can be hard to put the parts together because the shape 
doesn't fit like it used to. Playing it can also be hard since 
most of the sound might not come out because of the dent 
in the shape. So, you want to always keep it in the case 
after you're done playing with it. Also, don't sway your flute or 
put it on the ground because it can wreck the metal.  
 
 
 
 
 
 
 
 
 
 

 
 

 

 
 

 
 
 
 
 

Glossary   
 

    

Additionally- ​as an extra factor or circumstance. 

 
Dominant- m​ ost important, powerful, or influential. 
 

Historical- o​ f​ or concerning history; concerning past events. 

 

Purchase-​ ​acquire (something) by paying for it; buy. 

 

Wonky- c​ rooked; off-center; askew.