CV Assoc Prof Ts Dr Zuraidah Salleh

Ts. Dr. Zuraidah Salleh

Senior Lecturer,
Faculty of Mechanical Engineering,
Universiti Teknologi MARA,
40450 Shah Alam,
Selangor.

Tel: 012-2617275 Fax: 03-55435161

Email: [email protected]

EDUCATION BACKGROUND

PhD (Mechanical Engineering) 2015
Universiti Teknologi MARA
Thesis Title : A Study On The Post Impact And Open Hole Tensile Strength Of 2003
Kenaf and Kenaf/Fiberglass Reinforced Composite (Hybrid) 1998
1995
MSc. Material Science Engineering,
Universiti Sains Malaysia, Pulau Pinang, Malaysia.

B. Eng. (Hons) Mechanical Engineering
Institut Teknologi Mara, Selangor, Malaysia.

Diploma in Mechanical Engineering
Universiti Teknologi Malaysia, Johor, Malaysia

PROFESSIONAL QUALIFICATION

Professional Technologist, Malaysian Board of Technologist (Ts.)
BS EN ISO 17637: 2011 Non-Destructive Testing Of Welds, Visual Testing Of Fusion-
Welded Joints. CSWIP 3.1 Cert No 96252 - Welding Inspector (7 April 2014-17 February
2019)
Meet eyesight requirement of PCN/GEN for CSWIP NDT and Welding Inspector
Examination (17th Feb 2014)

PROFESSIONAL MEMBERSHIP

Member, Board of Engineers Malaysia
Professional Technologies, Malaysia Board of Technologists

WORKING EXPERIENCES

Oct 2020 – Present Head of Industrial Research Laboratory (BITCOM, UiTM Shah Alam
Feb 2004 – Present Senior Lecturer (Universiti Teknologi MARA)
Lecturer and Senior Lecturer (Universiti Teknologi MARA, Shah Alam)
 Head of Program Coordinator of EM110 (Diploma in Mechanical

Engineering) (2006-2008)
 Head of Program Coordinator of EM221 (Bachelor of Engineering in

Mechanical Manufacturing (Hons.)) (2008-2010)
 Head of Center Advance Material & Research (CAMAR)

2004-2007 Student Development Officer
Seroja Residential College, Universiti Teknologi Mara, Selangor,
Malaysia

2007-2009 Student Development Officer
Teratai Residential College, Universiti Teknologi Mara, Selangor,
Malaysia

2001-2002 Lecturer
Politeknik Shah Alam, Shah Alam, Selangor.
Teaching Technical Drawing, Strength of Material, Mechanical Design
and Foundry Workshop.
Teaching special student (deaf) in mathematic subject.

2000-2001 Central Mechanical/Facility Engineer
Head Quarter Radicare (M) Sdn. Bhd., TTDI, Kuala Lumpur.
Responsible to organize and supervise the operation of 42 Radicare
(M) Sdn. Bhd. branches for Mechanical equipment and facilities.

1998-2000 Mechanical Engineer

Radicare (M) Sdn. Bhd., Hospital Selayang, Selangor.

Responsible to manage and execute the Planned Preventive

Maintenance for all mechanical equipment in Hospital Selayang such

as air-conditioning system, fire protection system, steam and hot

water supply system, medical air system, central supply

sterilization department equipment and medical equipment.

1997-1998 Research Assistant
Faculty Mechanical Engineering, ITM Shah Alam.
Research and simulate the submerged water jet model by using Fluent
and Ansys Software.

RESEARCH GRANTS (LEADER/MEMBER)

Development Of Low Altitude Rocket Mission Tracker And Telemetry

100-RMC 5/3/SRP PRI (024/2020)

RM10,000(2020/12/21-2021/12/20)
Ahmad Hussein Bin Abdul Hamid (Ts Dr)

Silanization Effect On The Thermo Mechanical Properties Of Extracted Silica Arenga Pinnata
Composites

600-RMC/MyRA 5/3/LESTARI (058/2020)

RM20,000(2020/12/21-2022/12/20)
Noor Leha Binti Abdul Rahman (Dr)

Flame Retardant Mechanisms Of Granite Dust Filled Basalt Fibre Reinforced Polymer
Composites

600-RMC/MyRA 5/3/LESTARI (054/2020)

RM20,000(2020/12/21-2022/12/20)
Fauziah Binti Md Yusof

Damage Tolerance Index Of Quarry Waste Reinforced Insulation Panel

600-RMC/MyRA 5/3/LESTARI (052/2020)

RM20,000(2020/12/21-2022/12/20)
Sahril Bin Kushairi

Damage Tolerance Index Of Quarry Waste Reinforced Insulation Panel

100-RMC 5/3/SRP (019/2020)

RM10,000(2020/12/21-2021/12/20)
Sahril Bin Kushairi

Development Of Composite Solid Rocket Motor Casing

100-RMC 5/3/SRP (020/2020)

RM10,000(2020/12/21-2021/12/20)
Zuraidah Binti Salleh(Ts Dr)

Thermal Analysis On Solid Rocket Motor Body

600-RMC/MyRA 5/3/LESTARI (048/2020)

RM20,000(2020/12/21-2022/12/20)
Zuraidah Binti Salleh(Ts Dr)

Mechanisms Of Granite Dust Filled Basalt Fibre Reinforced Polymer Composites

100-RMC 5/3/SRP (018/2020)

RM50,000(2020/12/21-2021/12/20)
Zuraidah Binti Salleh(Ts Dr)

Site Installation, Repair, And Field Test Of Damaged/Corroded Pipes And Mechanical
Components Using Nanoparticle Embedded Fibre Composites Patch

100-RMC 5/3/SRP PRI (031/2020)

RM28,500(2020/12/01-2022/11/30)
Aidah Binti Jumahat(Professor Madya Dr)

Performance Evaluation Of Nanoparticle Embedded Fibre Composites Patch On
Damaged/Corroded Pipes And Mechanical Components

100-RMC 5/3/SRP (001/2020)

RM28,500(2020/12/01-2022/11/30)
Aidah Binti Jumahat(Professor Madya Dr)

Up Scaling The Electroplating Process Of Corrosion Resistant Cobalt Alloy Coated Mild
Steel

600-RMC/PRGS 5/3 (003/2020)

RM160,000(2020/09/01-2022/08/31)
Koay Mei Hyie(Profesor Madya Ir Dr)

MIH (MTCE FKM)

MIH-(005/2020)

RM150,000(2020/08/25-2022/08/24)
Zuraidah Binti Salleh(Ts Dr)

Failure Mechanisms Of Aluminium Foam-Basalt FRP Sandwich Panel

600-IRMI/DANA 5/3/REI (11/2017)

RM32,000(2017/09/01-2019/08/31)
Aidah Binti Jumahat(Professor Madya Dr)

Corrosion Resistance Of NanoCrystalline Cobalt-Nickel-Iron (CO-NI-FE) Coated Mild Steel
Pipe Coupling Casing (Part 2)

100-IRMI/PRI 16/6/2 (004/2018)

RM107,000(2017/05/02-2019/05/01)
Zuraidah Binti Salleh(Dr)

Automatic Multi Cutting And Pressing Machine

100-IRMI/PRI 16/6/2 (012/2017)

RM40,500(2017/04/20-2018/4/20)
Nik Rozlin Binti Nik Mohd Masdek(Dr)

Fire Resistance And Thermo-Mechanical Properties Of Radiation-Treated Basalt Composites

600-IRMI/DANA 5/3/BESTARI (0007/2016)

RM50,000(2016/09/01-2019/09/03)
Aidah Binti Jumahat(Professor Madya Dr)

Kneading And Divider Machine For Production Of `Roti Canai’

100-IRMI/PRI 16/6/2 (0049/2016)

RN29.250(2016/08/10-2017/07/20)
Zuraidah Binti Salleh(Dr)

Process Improvement For Production Of Onion Chips

100-IRMI/PRI 16/6/2 (0050/2016)

RM37,157(2016/08/10-2017/02/10)
Aidah Binti Jumahat(Professor Madya Dr)

Strength Factor Investigation Of Pneumatic Impact Treated Welding Joint

600-RMI/FRGS 5/3 (0097/2016)

RM97,300(2016/08/01-2019/04/30)
Zuraidah Binti Salleh(Dr)

Study Of Stress Reduction Due To Post Impact Tensile Strength Of Kenaf Hybrid Composite

600-RMI/DANA 5/3/LESTARI (111/2015)

RM20,000(2015/12/01-2018/05/30)
Zuraidah Binti Salleh(Dr)

Fundamental Study Of The Propagation And Scattering Of Guided Ultrasonic Waves In
Aerospace Composites With Defects

600-RMI/RAGS 5/3 (12/2015)

RM52,000(2015/12/01-2018/05/30)
Bibi Intan Suraya Binti Murat(Dr)

Analysis Of Stress Reduction Due To Post Impact And Open Hole Tensile Strength Of Kenaf
And Kenaf/Fibreglass Hybrid Reinforced Composite

600-RMI/RAGS 5/3 (18/2015)

RM53,000(2015/12/01-2017/11/30)
Ilya Izyan Binti Shahrul Azhar

Fundamental Study On The Corrosion Behaviour Of Bio-Implant Alloys

600-RMI/RAGS 5/3 (37/2015)

RM53,000(2015/12/02-2017/11/30)
Mardziah Binti Che Murad

Wear And Corrosion Investigation Of CO-NI-FE Coated On Mild Steel

600-RMI/DANA 5/3/LESTARI (41/2015)

RM20,000(2015/12/01-2018/05/30)
Mohamad Nor Bin Berhan(IR)(Prof.DR)(Professor.DR)

Effect Of Iron Content On The Corrosion Behaviour Of NanoCrystalline Cobalt-Nickel-Iron
Alloy Coating

600-RMI/DANA 5/3/LESTARI (67/2015)

RM20,000(2015/12/01-2017/11/30)
Nor Fazli Bin Adull Manan (Ts.Dr)

Wear And Corrosion Investigation OF CO-NI-FE Coated On Mild Steel

600-RMI/DANA 5/3/LESTARI (41/2015)

RM20,000(2015/12/01-2018/05/30)
Nik Rozlin Binti Nik Mod Masdek(Dr)

Effects Of Infiltration Factors On Biomorphic Silicon Carbide Converted From Different
Wood Powders Waste

600-RMI/FRGS 5/3 (52/2015)

RM106,000(2015/11/02-2017/11/01)
Koay Mei Hyie(Professor Madya Ir Dr)

Uncovering The Electrochemical Behavior Of Electrodeposited Nanocrystalline Cobalt-Iron
Alloy Coatings

600-RMI/FRGS 5/3 (80/2015)

RM108,200(2015/11/02-2018/05/01)
Nik Rozlin Binti Nik Mohd Masdek (Dr)

Impact Behavior Enhancement Of Kevlar/Kenaf Composite By Nanoclay

600-RMI/RAGS 5/3 (64/2013)

RM65,000(2013/09/15-2015/09/14)
Eli Nadia Binti Abdul Latip

Low Blow Impact Of Natural Fibre Hybrid Composite

600-RMI/DANA 5/3/RIF (609/2012)

RM16,327.70(2012/11/01-2014/10/31)
Mohd Khalid Bin Hassan (Professor Madya)

Water Absorption Effect On The Post Impact Tensile Of Kenaf Composite

600-RMI/DANA 5/3/RIF (93/2012)

RM9,940.75(2012/06/01-2014/05/30)
Mohamad Nor Bin Berhan (Ir)(Prof.Dr)(Professor.Dr)

Potential Thixotropic Natural Fibre/Fibreglass Hybrid Composites As High Impact Resistance
Panels In Automotive Abd Marine Application

600-RMI/DANA 5/3/RIF (94/2012)

RM22,096.05(2012/06/01-2014/05/30)
Ya’kub B MD Taib

In-Situ Sintering Of High Temperature Electrodeposited Cobalt-Nickel-Iron Nanocoating

600-RMI/FRGS 5/3 (55/2012)

RM51,000(2012/04/15-2014/04/14)
Muhd Azimin Bin AB Ghani

New Properties Of Kenaf Fiber Composite Using Impact Approach

600-RMI/ST/FRGS 5/3/Fst (167/2010)

RM40,940(2010/09/01-2013/08/31)
Nor Fazli Bin Adull Manan (Ts.Dr)

Mechanism Study Of The Corrosion Behaviour Of Electodeposited Nanocrystalline Cobalt
And Its Alloys Using Potentiodynamic Polarization

600-RMI/ST/FRGS 5/3/Fst (177/2010)

RM48,160(2010/09/01-2012/11/01)
Koay Mei Hyie(Professor Madya Ir Dr)

Impact And Post Impact Properties of Metal Fibre Composite Materials

100-IRDC/SF 16/6/2(67/2007)

RM227,000(2007/09/01-2009/08/31)
Ya’kub B MD Taib

Comparison Of Mechanical Properties For Plypropylene(PP) Laminated On Fibreglass/Epoxy
Resin And aluminium Net/Epoxy Resin Composite

600- IRDC/ ST/5/3/1263

RM(2007/07/12-2007/07/12)
Zuraidah Binti Salleh(Dr)

Notch Strength Reduction And Damage Analysis Of Textile FRP Composites

600-IRDC/ ST 5/3/1026

RM20,000(2005/09/01-2008/09/28)
Zuraidah Bnti Salleh(Dr)

Interfacial Toughness And damage Behavior Of Carbon/Glass Fibre Hybrid Composite

600-IRDC/ST 5/3/988

RM12,000(2005/06/01-2008/05/28)
Zuraidah Binti Salleh (Dr)

PUBLICATIONS (JOURNALS/PROCEEDING)

Evaluation of a Newly Designed Aerospike for Cloud Seeding Prototype Rocket Drag
Reduction
AHA Hamid, Z Salleh, AMIA Suloh, MJ Sujana, MS Saad, MI Khamis
Pertanika Journal Science & Technology, Accepted

Performance Evaluation of Low-Thrust Rocket Nozzles of Various Geometries
AHA Hamid, Z Salleh, ATA Termizi, MA Muhammad, MAM Sapardi
Journal of Mechanical Engineering, Accepted

Electrodeposition of Co-Ni-Fe Thin Film Using Hull Cell
MS Md.Nor, Z Salleh, NRNM Masdek, YM Taib, KM Hyie, MZ Abu
Materials Today: Proceedings, 2020/10/20

Optimization of Resistance Spot Welding (RSW) Parameters by using Taguchi Method
NAM Yasin, A Alisibramulisi, Z Salleh, FA Ghazali, A Pawan
International Journal of Innovative Technology and Exploring Engineering, 9(3) 2795-2800,
2020

Single Edge Notch Bend (SENB) of Kenaf/Fibreglass Hybrid Composites
S Yunus, Z Salleh, YM Taib, NRNM Masdek, KBZ Abidin
International Journal of Recent Technology and Engineering, 8(4) 6967-6971, 2019

Kenaf/polypropylene key chain product fabricated by injection moulding
MH Koay, Z Salleh, N Masdek, S Budin, A Ngu
Journal of Physics: Conference Series, 1349, 012047, 2019

Tensile properties of the reclaimed steel rail flash butt joint
A Pawan, Z Salleh, AH Zulkefli, A Alisibramulisi, NRNM Masdek
IOP Conference Series: Materials Science and Engineering, 628, 012008, 2019

The Characterization of Co-Ni-Fe Coating in Different pH Environment
NRNM Masdek, MN Othman, Z Salleh, ZAK Baharin
International Journal of Recent Technology and Engineering, 8(4) 6950-6955, 2019

Resistance Spot Weld assisted with Adhesive Bonding
FA Ghazali, NM Zain, Z Salleh, YM Taib, A Jumahat
International Journal of Recent Technology and Engineering, 8(4) 6978-6982, 2019

Experimental investigations on the effect of inverted cone condenser plate material and tilt
angle on the solar still production under Malaysia conditions
Kamarulbaharin Z.A., Adzhar M.A.M., Azmi A.M., Singh B.S.B., Masdek N.R.N., Salleh Z.
International Journal of Recent Technology and Engineering, 8 (1) 3171-3174, 2019

Post impact tensile and single edge notch bending test of kenaf hybrid composite
Yunus S., Salleh Z., Taib Y.M., Masdek N.R.N.M., Hassan M.F.B.C.
International Journal of Engineering and Advanced Technology, 9 (1) 5657-5662, 2019

Effects of deposition time on surface properties of Co-Ni-Fe alloy synthesised on hex bolts
Nor M.S.M., Salleh Z., Masdek N.R.N., Hyie K.M., Kushairi S.
International Journal of Engineering and Advanced Technology, 9(1) 5780-5785, 2019

Effect of fibre architecture on impact response of glass-aluminium fibres metal laminates
(FML)
Hozumi M., Jumahat A., Sapiai N., Salleh Z.
International Journal of Engineering and Advanced Technology, 9 (1) 5639-5645,2019

Improvement of mechanical properties in treated spot welded joint
Salleh Z., Taib Y.Md., Masdek N.R.N.M., Ghazali F.A.
Materials Today:Proceeding 16(2019)1988-1993

Corrosion investigation of electrodeposited cobalt-nickel-iron (CoNiFe) fasteners with the
different deposition time
Nik Masdek N.R., Salleh Z., Md Taib Y., Che Murad M., Zulfarizan Z.
Materials Today:Proceeding 16(2019)1919-1928

Erosion wear and adhesive investigation of Co-Ni-Fe coated on mild steel
Hyie K.M., Salleh Z., Mohd Masdek N.R.N., Taib Y.Md., Kalam A.
Materials Today:Proceeding 16(2019)1983-1987

Tensile and flexural investigation on polypropylene recycling
KM Hyie, S Budin, N Martinus, Z Salleh, NRNM Masdek
Journal of Physics: Conference Series 1174(1), 012005, 2019

Three Response Optimization of Spot-Welded Joint Using Taguchi Design and Response
Surface Methodology Tecniques
FA Ghazali, Z Salleh, YHP Manurung, YM Taib. KM Hyie, MA Ahamat, SH Ahmad Hamidi
The Advance in Joining Technology, 85-95, 2019

Improvement of Mechanical Properties in Treated Spot Welded Joint
FA Ghazali, Z Salleh, Y HP Manurung, Y Md Taib
Journal of Mechanical Engineering (JMechE), 239-247, 2018

Effects of Protein Concentration on Corrosion of Ti-6Al-4V amd 316L SS Alloys
NRN Masdek, AA Rozali, MC Murad, Z Salleh
ISIJ International 58 (8), 1519-1523, 2018

Synthesis and characterization of Co-Mo alloy coating
NRN Masdek, Z Salleh, MH Koay, MA Ismail
IOP Conference Series: Materials Science and Engineering 380(1), 012012, 2018

The effect of protein concentration on corrosion of nitinol alloy:Einfluss der
Proteinkonzentration auf die Korrosion einer Nitinol-Legierung
AA Rozali, NRN Masdek, MC Murad, Z Salleh, MH Koay
Materialwissenschaft und Werkstofftechnik 49 (4), 489-493, 2018

Tensile and Flexural Test on Kenaf Hybrid Composites
Z Salleh, S Yunus, NRNM Masdek, YM Taib, ISS Azhar, Km Hyie
IOP Conference Series: Materials Science and Engineering 328(1), 012018, 2018

Post-Impact and Open Hole Tensile Of Kenaf Hybrid Composites
S Yunus, Z Salleh, NRNM Masdek, YM Taib, IIS Azhar, KM Hyie
IOP Conference Series: Materials Science and Engineering 328(1), 012017, 2018

Synthesizing the Nanocrystalline Cobalt-Iron Coating Through The Electrodeposition Process
With Different Time Deposition
NRN Masdek, MSH Mansor, Z Salleh, KM Hyie
IOP Conference Series: Materials Science and Engineering 328(1), 012002, 2018

Corrosion behavior of heat treated nanocrystalline co-ni-fe coating on stainless steel
KM Hyie, Z Salleh, MC Murad, MRNM Masdek, NA Resali
Journal of Mechanical Engineering 5 (Special issue2), 191-203, 2018

The characteristic of Cobalt-nickel-iron alloy coating coated on aluminium, brass and stainless
steel
NRNM Masdek, Z Salleh, MZ Abu
International Journal of Engineering and Technology (UAE) 7 (4), 97-101, 2018

Electrodeposition of Co-NI-Fe on stainless steel bolts
MSM Nor, Z Salleh, NRNM Masdek, YM Taib, MZ Abu
International Journal of Engineering and Technology (UAE) 7 (4), 221-225, 2018

Electrochemical behavior of titanium alloys and stainless steel in different simulated body
fluid
NRBNM Masdek, Z Salleh, ZAK Baharin, MZ Abu
International Journal of Engineering and Technology (UAE) 7 (4), 185-189, 2018

Electrodeposition of Co-Ni-Fe on railway fastener
YM Taib, Z Salleh, NRNM Masdek, A Jumahat, A Kalam, MZ Abu
International Journal of Engineering and Technology (UAE) 7 (4), 46-50

The effect of pH value on the corrosion of Ti-6Al-4V and 316L SS alloys under physiological
environment
AA Rozali, NRNM Masdek, MC Murad, Z Salleh, KM Hyie
Chemical Engineering Transactions, 769-774, 2018

Effects of post weld impact treatment (PWIT) on mechanical properties of spot-welded joint
FA Ghazali, Z Salleh, KM Hyie NMN Rozlin, SHA Hamidi, MM Padzi
AIP Conference Proceedings 1901 (1), 050004, 2017

Charaterization of electrodeposited nanocrystalline cobalt-iron coating with different iron
content
NRN Masdek, NFA Manan, Z Salleh, KM Hyie, MC Murad, A Kalam, A Jumahat
AIP Conference Proceedings 1901(1), 120009, 2017

The study of corrosion behavior of Cobalt-Iron (CoFe) alloy coating
NFA Manan, NRNM Masdek, AQA Aziz, Z Salleh
Journal of Mechanical Engineering, 167-183, 2017

Effects of low blow impact treatment on fatigue and mechanical properties of spot-welded
joints
FA Ghazali, Z Salleh, KM Hyie, NRNM Masdek
Pertanika Journal of Science and Tecnology 25(S8), 115-124, 2017

Mechanical Properties Study on Different Types of Kenaf PVC Wall Panel Product
Z Salleh, NRN Masdek, KM Hyie, S Yunus
Pertanika Journal of Science and Technology 25, 199-208, 2017

Improvement of Mechanical Properties and Fatigue Failure of Spot-Welded Joint through
Pneumatic Impact Treatment (PIT)
FA Ghazali,Z Salleh, KM Hyie, YM Taib, NM Nik Rozlin
Pertanika Journal of Science and Technology 25, 105-114, 2017

Tensile and Compressive Properties of Unidirectional Arenga Pinnata Fibre Reinforced Epoxy
Composite
A Jumahat, MFS Khalid, Z Salleh, M Jawaid
Pertanika Journal of Science and Technology 25, 299-308, 2017

Corrosion investigation of Co-Ni-Fe-coated mild steel electrodeposited at different current
densities and deposition times
MH Koay, MAA Tukiran, SNA Mohd Halidi, M Che Murad, Z Salleh, H Yusoff,
Industrial Lubrication and Tribology 69(3), 393-398, 2017

Flexural Properties of Random and Unidirectional Arenga Pinnata Fibre Reinforced Epoxy
Composite
MFS Khalid, A Jumahat, Z Salleh, M Jawaid
Pertanika Journal of Science and Technology 25, 93-102, 2017

Effects of Sintering Temperature on Zinc Substituted Calcium Phostate Ceramics
CM Mardziah, MFA Wahid< KM Hyie, NRN Masdek, Z Salleh
Materials Science Forum 890, 2017

The Effects of Saccharin Concentration on the Electrochemical behavior of Electrodeposited
Nanocrystalline Cobalt-Iron Coating
NRN Masdek, WMA Aiman, MC Murad, Z Salleh, KM Hyie
Pertanika Journal of Science and Technology 25, 191-200, 2017

An Experimental Study on Effects of Post Weld Impact Treatment on Spot Welded Steel
FA Ghazali, Z Salleh, YHP Manurung, A Zulkifli, NM Zain, SHA Hamidi, SW Ismail
International Journal of Applied Engineering Research 12 (24), 14658-14663, 2017

Influence of Different Matrices on The Tensile and Impact Properties of Treated Kenaf
Composites
NH Bakar, KM Hyie, A Jumahat, ENA Latip, A Kalam, Z Salleh
Advanced Materials Research 1133, 136-140, 2016

Corrosion study of heat treated nanocrystalline CoNiFe coating exposed in sodium solution
NA Resali, KM Hyie, MN Berhan, NRN Roselina, CM Mardziah, Z Salleh
Proceedings of Malaysian International Tribology Conference 2015, 34-35, 2015

Tri-objective optimization of carbon steel spot-welded joints
FA Ghazali, MN Berhan, YHP Manurung, Z Salleh, S Abdullah
Jurnal Teknologi 76 (6), 2015

Fatigue life of kenaf woven hybrid composite
MN Berhan, S Yunus, Z Salleh, NRN Masdek, YM Taib, FA Ghazali
Jurnal Teknologi 76(6), 2015

Kenaf as material for labatory tabletop
Z Salleh, S Yunus, MN Berhan, KM Hyie, A Kalam, NRN Masdek
Jurnal Teknologi 76 (9), 2015

Low energy impact on the short kenaf fibre reinforced epoxy composites: effects to the
residual strength and modulus
S Yunus, AH Abdullah, A Halim, N Hayati, Z Salleh
Journal of Mechanical Enginerring 12 (2), 72-83, 2015

Kevlar Reinforcement in Treated Kenaf Composites: Tensile and Impacts Properties
NH Bakar, KM Hyie, A Kalam, Z Salleh, N Imang, F Dualis
Advanced Materials Research 1113, 68-73, 2015

Tensile and Impact Strength of Coir Fibre Reinforced Polypropylene Composites: Effects of
Different Temperature Conditions
Z Salleh, KM Hyie, S Yunus, YM Taib, MN Berhan, A Kalam
Applied Mechanics and Materials 763, 25-29, 2015

Effects of alkaline treatment on tensile and impact strength of kenaf/Kevlar hybrid composites
NH Bkar, KM Hyie, A Jumahat, A Kalam, Z Salleh
Applied Mechanics and materials 763, 3-8, 2015

Impacted of Vacuum Bag Woven Kenaf/Fiberglass Hybrid Composite
S Yunus, Z Salleh, MA Aznan, MN Berhan, A Kalam, AA Rashid, FR Wong
Applied Mechanics and Materials 660,572-577, 2014

Kenaf fibre composites using thermoset epoxy and polyester polymer resins: energy absorbed
versus tensile properties
NH Bakar, KMHyie, AF Mohamed, Z Salleh, A Kalam
Materials Research Innovations 18(sup6), S6-505-S6-509, 2014

Investigation of Redox-Transmetallation Process for Coating of Gold (Au)-shell on Nickel
(Ni)-core Nanoparticles
NR Nik Roselina, A Aziz, KM Hyie, CM Mardziah, Z Salleh
Applied Mechanics and Materials 607, 55-60, 2014

Residual tensile stress of kenaf polyester and kenaf hybrid under post impact and open hole
impact
Z Salleh, KM Hyie, MN Berhan, YMD Taib, ENA Latip, A Kalam
Procedia Technology 15, 856-861, 2014

Effect of water absorption on mechanical properties of kenaf and kenaf hybrid polyester
Z Salleh, KM Hyie, MN Berhan, YM Taib, NR Nik Roselina, ARM Razib
Applied Mechanics and Materials 465, 967-972, 2014

Thermal degradation behavior and tensile properties of OPEFB fiber filled HDPE/clay
nanocomposites
Rahilah Kamarudzaman, Anizah Kalam, Nur Amanina Mohd Fadzil, Nurul Natisya Ahmad,
Zuraidah Salleh
Advances in Environmental Biology 8 (8), 2696-2702, 2014

Effects of oil palm empty fruit bunch (OPEFB) fibre size on fracture toughness of OPEFB
filled polymer nanocomposite
R Kamarudzaman, A Kalam, NN Ahmad, NWA Razak, Z Salleh
Advanced Materials Research 871, 189-193, 2014

Post Impact Fracture Toughness of Kenaf/Polypropylene Composite With and Without Metal
Laminate
YM Taib, MHN Aini, Z Salleh, S Yunus
Advanced Science Letters 19 (2), 388-391, 2013

The physical and magnetic properties of electrodeposited Co-Fe nanocoating with different
deposition times
K Mei Hyie, WNR Abdullah, NA Resali, WT Chong, Z Salleh, MAA Ghani
Journal of Nanomaterials, 2013

Co-Fe Nanoparticles Coated on Copper Substrate: Effects of Different Deposition Times
WNR Abdullah, NA Resali, KM Hyie, NR Nik Roselina, CM Mardziah, Z Salleh
Applied Mechanic and materials 393, 222-227, 2013

The Role of Hydroxide Ions in the Synthesis of Ni Nanoparticles Using High Temperature
Polyol Method
N Roselina, N Roseley, A Aziz, KM Hyie, CM Mardziah, A Kalam, NH Saad, Z Salleh
Applied Mechanics and Materials 391, 18-22, 2013

Mechanical Properties and Fracture Toughness of Alkali Treated Oil Palm Fruit Bunch
(OPFB) Fibre/Epoxy Composites
A Kalam, A Jumahat, Z Salleh, KM Hyie
Applied Mechanics and Materials 390, 521-525, 2013

Cobalt-nickel-iron nanoparticles coated on stainless steel substrate
NA Resali, KM Hyie, MN Berhan, Z Salleh, S Kasolang
Procedia Engineering 68, 30-36, 2013

Synthesis route towards fine and monodisperse Ni nanoparticles via hot-injection approach
NR Nik Roselina, A Azizan, KM Hyie,CM Mardziah, S Kasolang, SK Alias, Z Salleh
Applied Mechanics and Materials 393, 146-151, 2013

Wear rate of natural fibre: long kenaf composite
NA Nordin, FM Yussof, S Kasolang, Z Salleh, MA Ahmad
Procedia Engineering 68, 145-151, 2013

Slurry wear test of long kenaf polyester composite (LKPC) and long kenaf polyester with
fiberglass composite
MAA Ghani, AF Kamal, MA Ahmad, YMD Taib, Z Salleh, SK Alias
Applied Mechanics and Materials 393, 919-924, 2013

Effect of low impact energy of kenaf composite and kenaf/fiberglass hybrid composite
laminates
Z Salleh, KM Hyie, MN Berhan, YM Taib, MK Hassan, DH Isaac
Applied Mechanics and Materials 393, 228-233, 2013

Open hole tensile properties of kenaf composite and kenaf/fiberglass hybrid composite
Z Salleh, MN Berhan, KM Hyie, YM Taib, A Kalam, NRN Roselina
Procedia Engineering 68, 399-404, 2013

Cold-pressed kenaf and fiberglass hybrid composite laminates: Effects of fibre types
Z Salleh, MN Berhan, KM Hyie, DH Isaac
World Academy of Science, Engineering and Technology, International Science Index
Material A, 2012

Z Salleh, MN Berhan, KM Hyie, DH Isaac
Cold- pressed kenaf and fiberglass hybrid composites laminates: effects of fibre types.
World Acad Sci Eng Technology, 2012

Mechanical properties of kenaf/fiberglass polyester hybrid composite
MAA Ghani, Z Salleh, KM Hyie, MN Berhan, YMD Taib, MAI Bakri
Procedia Engineering 41, 1654-1659, 2012

Fracture toughness investigation on long kenaf/woven glass hybrid composite due to water
absorption effect
Z Salleh, YM Taib, KM Hyie, M Mihat, MN Berhan, MAA Ghani
Procedia Engineering 41, 1667-1673, 2012

Superconductivity and enhancement of crtical current density of Ta-substituted TISr1212 with
addition of nanosize MgO
MI Yusof, Z Salleh, AK Yahya, MH Jumali
Materials Research Innovations 13 (3), 364-367, 2009

Superconductivity and Critical Current Density of MgO-Added
AK Yahya, Z Salleh, M Hafiz-Jumali
AIP Conference Proceedings 909 (1), 265-268, 2009

Comparison of electrical physical and mechanical properties of textile composites using
microwave nondestructive evaluation
Aidil Saifan Abu Bakar, Mohd Iqbal Misnon, Deepak Kumar Ghodgaonkar, Norasimah
Khadri, Jamil Hj Salleh, Wan Yunus Wan Ahmad, Mohamed Dahalan Mohamed Ramli,
Yakub Md Taib, Zuraidah Salleh
2004 RF and Microwave Conference (IEEE Cat No. 04EX924), 164-168, 2004

Comparison of Mechanical Properties for Polypropylene (PP), Laminated on
Fiberglass/Epoxy Resin and Aluminium Net/Epoxy Resin Compositres
Z Salleh, NA Nordin, I Saad
Development and Commercialisation. Malaysia, 2002

SUPERVISION

POSTGRADUATE SUPERVISION (MASTER/PHD) (Includes Co-supervision)

No. Students Name Institutions Year Enrolled STATUS

1 Farizah Adliza Ghazali UiTM/PhD 2014 Completed

2 Syarifah Binti Yunus UiTM/PhD 2016 Completed

3 Nang Jamilah binti Nik UiTM/PhD 2020 On-Going
Omar

4 Anuar Pawan @Md UiTM/PhD 2017 On-Going
Muhaimin

5 Muhamad Syafiq Bin UiTM/MSc 2018 On-Going
Mohd Nor

6 Muhammad Afif Bin UiTM/MSc 2016 On-Going
Hassim

7 Mohammad Ghafar Bin UiTM/MSc 2016 On-Going

Khairuddin

8 Muhamad Faris Syafiq UiTM/MSc 2014 Completed

bin khalid

UNDERGRADUATE SUPERVISION (Includes Co-supervision)

No Year/Semester Name Of Student Project Title

1. EM220- Khalkhalas Bin The Effects of Different Designs of Fins and

On-going Kamaludin Nose Cone towards the Stability and

Performance of a Sugar Rocket

2. EM220- Muhammad Haziq Bin Finite Element Analysis on Multiple

On-going Anuar Launcher Rocket System

3. EM220- Mohamad Akmal Bin Finite Element Analysis of Solid Propellant

On-going Mohd Fazli Rocket Body

4. EM220- Aiman Syafiq Bin Tensile Strength Analysis of Reclaimed Steel

AUG 2020 Khairuddin Rail Welded Joint using Finite Element

5. EM220- Maizatulakilah Binti Chemical Composition of Ignition System in

AUG 2020 Yatim Mustapha Solid Rocket Motor

6. EM220- Siti Farisya Binti Thermal Analysis of Solid Rocket Motor

AUG 2020 Mohammad Rafig

7. EM220- Nur Amnani Athirah Development of Mobile Rocket Launcher

AUG 2020 Binti Ngatiman for Cloud Seeding Operation

8. EM220- Norhaslina Binti Mohd Nozzleless Solid Rocket Motor

AUG 2020 Razak

9. EM220-JAN Mohamad Syahir Bin Corrosion Resistance of Hot Dip Galvanized,

2021 Ahmad Zinc Phosphate and Co-Ni-Fe Coated Bolts

10. EM220- Akid Himli Bin Zulkefli Tensile Properties Of The Reclaimed Steel

JAN 2019 Rail Falsh Butt Joint

11. EM220- Azwan Bin Change In Reclaimed Steel Rail Properties

JAN 2019 Muhammad Yasin Experience Weld Flash

12. EM220- Ahmad Shafiq Bin Tensile Shear Of Low Blow Impact

JUN 2018 Jamaluddin Treatment (Hemispherical Head) Resistace

Spot Welding On Mild Steel

13. EM220- Aizt Fawwaz Bin A Study Of Cobalt-Nickel-Iron(Conife)

JUN 2018 Arbain Coating On Railway Fastener

14. EM220- Azam Amirul Bin Ramli Low Blow Impact Treatment (Lbit) Using 6

JUN 2018 Hemispherical Head On Resistance Spot

Welding

15. EM220- Mavrick Shaun Saimon Low Blow Impact Treatment (Lbit) Using

JUN 2018 Hemispherical Head On Resistance Spot

Welding For Mild Steel 1.0 Mm Thickness

16. EM220- Mohd Aizat Bin Zulkifli A Study On The Corrosion Behavior Of Co-

JUN 2018 Ni-Fe Alloy Coated On A Double Coil Spring

Washer

17. EM220- Muhammd Fahmi Bin Electrodeposited Of Co-Ni-Fe On Railway

JUN 2018 Abd Rahim Fastener

No Year/Semester Name Of Student Project Title

18. EM220- Muhammad Haziq Bin A Study Of The Corrosion Behavior Of Co-

JUN 2018 Mokhtar Ni-Fe Alloy Coated On Anchor Bolt

19. EM220- Muhammad Syafiq Bin Electrodeposition Of Co-Ni-Fe On Stainless

JUN 2018 Md.Nor Steel Bolts

20. EM220- Zulkifli Bin Zakaria Investigation Of The Electrodeposited

JUN2018 Conife Alloy Coating On The Microstructure

And Mechanical Properties

21. EM220- Che Datasya Binti Che Mechanical Properties On Resistance Spot

JUL 2017 Dak Welding With Low Blow Impact By Using

Numerical Technique

22. EM220- Mohamad Design And Fabricate A Steering Of A

JUL 2017 Shahrulnizam Bin Prototype Hydrogen Fuel Cell Vehicle For

Ahmad Shell Eco Marathon

23. EM220- Muhammad Akmal Bin Study On Mechanical Properties Of Kenaf

JUL 2017 Azizan Woven Feberglass Composites

24. EM220- Nur Fatin Najiah Binti Investigation On Mechanical Properties Of

JUL 2017 Azhar Resistance Spot Welding With Pneumatic

Impact Treatment Using Finite Element

Method

25. EM220- Nur Haezah Binti Study On Mechanical Properties Of Long

JUL 2017 Othman Kenaf/Woven Fiberglass Hybrid Composite

26. EM220- Nursyafawani Kasram Flexural Strength, Fracture And Impact

JUL 2017 Binti Mohd Hisham Toughness Analysis Of Kenaf/Woven

Fiberglass Polyester Composite

27. EM220- Abdullah Ariff Bin Study On Tensile And Flexural Properties Of

JAN 2017 Tupin Railway Sleeper Reinforced Kenaf

Composite

28. EM220- Ahmad Najmi Bin Investigating The Performance Of 1g Bop

JAN 2017 Ahmad Basir Fcaw Welding Predictor, Based On 4 Levels

Of Bead Penetration

29. EM220- Firdaus Bin Mustafa Numerical Study Of Mechanical Behaviour

JAN 2017 In Resistance Spot Welding Using Finite

Element Method

30. EM220- Syed Muhammad Study On Compression And Flexural

JAN 2017 Hafiz Bin Syed Ahmad Properties Of Railway Sleeper Reinforced

Kenaf Composite

31. EM220- Ahmad Ajwad Bin Study On Preventing Corrosion Process Of

JUL 2016 Awang Metal In Various Conditions

32. EM220- Danial Aiman Bin Mechanical Properties Study On Recycled

JUL2016 Rahim Kenaf Pvc Wall Panel Product

No Year/Semester Name Of Student Project Title

33. EM220- Nor Iziafiqah Binti Influence Of Air Gap On Sound Absorption

JUL2016 Zakaria Performance Of Recycle Kenaf Polyvinyl

Chloride (Kpvc) Wall/Ceiling Panel

34. EM220- Nurul Fazlien Binti Mechanical Properties Investigation On

JUL2016 Pead Kenaf Polymer Composite Wall Panel Due

Tu Uv Light Effect

35. EM220- Zulfarizan Bin Zakaria Corrosion Investigation Of Electrodeposited

JUL2016 Cobalt-Nickel-Iron(Conife) Fasteners

Watergate System (Jabatan Pengairan Dan

Saliran,Jps Terengganu) With The Effect Of

Different Deposition Time

36. EM221- Aqmal Ariffin Bin Alias Determining The Mechanical Properties Of

JAN 2016 Kenaf Fiberglass Hybrid

37. EM220- Muhammad Afif Bin Mechanical Properties Evaluation On Low

JAN 2016 Hassim Carbon Steel Spot Welded Joint Using Finite

Element Analysis

38. EM220- Bukhairi Bin Suzaillie Treatment For Spot Welding On The

JUL 2015 Mechanical Properties By Using Application

Of High Frequency Mechanical Impact

(Hfmi)

39. EM220- Mohd Razlan Bin The Effect Of Poat Impact And Open Hole

JUL 2015 Abdul Manan Tensile On Cross-Ply (0/90)S Kenaf/Wovwn

Glass Hybrid

40. EM220- Nooradinan Bin Post Impact And Open Hole Tensile Of Glass

JUL 2015 Noordin Sandwich Kenaf Composite

41. EM220- Shahrul Izwan Bin Post-Impact And Open Hole Tensile Of

JUL 2015 Abdul Ghani Kenaf Sandwich Glass Composite

42. EM220- Wan Muhammad Correlation Between Flexural And Tensile

JUL 2015 Shafiq Bin Wan Yusof Of Young Modulus For Kenaf/Fiberglass

Composite

43. EM221- Mohamad Fadzlin Bin New Material For Labaratory Tabletop

JAN 2015 Mohamad Farik

44. EM221- Mohd Huzairi Bin Chopped Kenaf Woven Glass Composite For

JAN 2015 Mukhtar Labaratory Tabletop

45. EM220- Muhammad Alif Bin An Application Of Kenaf- Fiberglass

JAN 2015 Ahmad Reinforced Polyester Resin Composite In

Fabricating A Skateboard Deck

46. EM220- Mohamad Sidqi Bin Fatigue Life Degradation On Kenaf Woven

JAN 2015 Sazali Hybrid Composite

47. EM221- Ku Mohammad Yazid Mechanical Properties Of Vacuum Bagging

JUL 2014 B Ku Ibrahim Unidirectional Kenaf/Woven Fiberglass

Hybrid Composite

No Year/Semester Name Of Student Project Title

48. EM221- Mohamad Kairulnizam Improvement Of The Design And

JUL2014 Bin Ali Development Of New Fume Hood For
School Usage

49. EM220- Muhammad Alif Asyraf Post Impact Tensile Of Hand Lay-Up Hybrid

UL 2014 Bin Mod Ashiri Woven Kenaf/Fiberglass Epoxy Composites

50. EM220- Muhammad Amir Bin Fabrication By Two Different Methods:
JUL 2014 Redzuan Mechanical Properties Investigation
Fadhlul Wafi Bin Keya Post Impact Tensile On Kenaf
51. EM220- Nordin Powder/Fiberglass Laminate
APR 2010 Mohammad Irwan Bin Post Impact Tensile Of Kenaf Powder
Imran Composite
52. EM220- Mohammed Khairil Bin Fracture Toughness Analysis In Mild Steel
NOV 2009 Mohamed Dasok Welded By Semi-Automatic Tig Welding
Technique With 30c Of Grooves
53. EM220- Mohd Fais Bin Angle,Single And Double Bevel Joint
NOV 2009 Zianalabiden Fracture Toughness Analysis In Mild Steel,
Welded By Semi-Automatic Tig Welding
54. EM220- Wan Azri Bin Wan Adli Technique With 45c Of Grooves Angle Anf
NOV 2009 Single-Double Bevel Joint
Ahmad Sabri Bin Abdul Fracture Toughness Analysis In Mild Steel
55. EM220- Rahman Welding By Semi-Automatic Tig Welding
NOV 2009 Technique With 60c Groove Orgie And
Mohd Ainan Fadzullah Single-Dauble Level Of Joint
56. EM220- Bin Shamuzeen Rice Husk Reinforced Epoxy ; Correlation
APR 2009 Between Izod Impact Toughness And
Mohd Faizal Bin Reacture Toughness
57. EM220- Adenan Investigation The Nature Of Fracture
APR 2009 Toughness Of Mild Steel With 3-Point Bend
Mohd Shafirol Bin Test Specimen
58. EM220- Osman Invetigation The Nature Of Fracture
APR 2009 Mohd Yusof Bin Sungit Tougness Of Aluminium Alloy With 3-Point
Bend Test Specimen
59. EM220- Mohd Zahid Bin Design And Fabricate Biaxial Loading Fixture
APR 2009 Nordin
Mohd Zamri Fithri Bin Investigation Yhe Nature Of Fracture
60. EM220- Mat Noor Toughness Of Aluminium Alloy With
APR 2009 Compact Tension Specimen
Design And Fabricate Biaxial Loading Fixture
61. EM220-
APR 2009 Post Fatigue Impact Testing On Fml
Material
62. EM220-
APR 2009

No Year/Semester Name Of Student Project Title

63. EM220- Mokhtar Bin Mat Yajid Fracture Toughness Of & Post Impact

APR 2009 Fracture Toughness On Rice Husk/Pp/A1

64. EM220- Muhammad Shahril Fracture Toughness Of Aluminium Alloy

APR 2009 Bin Alang Idris Using Compact Tension Specimen Test For

Single And Doube U Joint Of Welding

65. EM220- Nifidah Binti Ngadi Design And Model Of Barnacle Remover

APR 2009 Machine With Wire Brush

66. EM220- Nursyafiqa Binti Noor Post Impact Failure Of Log Kenaf Fibre

APR 2009 Azman Reinforced Polymer Composite

67. EM220- Tony Ak Abam Fracture Toughness Of Polyester Resin (Pr)

APR 2009 Reinforced Kenaf Short Fiber (Ksf)

68. EM220- Mohd Fariz Bin Investigation Of Mechanical Properties Of

NOV 2008 Ali@Ismail Kenaf Fiber Reinforced Polymer (Kenaf

Powder) Through Tensile And Impact Test

69. EM220- Abu Bakar Bin The Study Of Mechanical Properties On

NOV 2008 Mohammad Nor Welded Aluminium Plate By Using Tungten

Intert Gas (Thickness 4mm. Square Butt

Joint)

70. EM220- Mohamed Suhaimi Bin Impact Studies Of Kenaf Powder Composite

NOV 2008 Mohamed Ishak

71. EM220- Mohd Hamizi Bin Md Fracture Tougness

NOV 2008 Ayob

72. EM220- Mohd Khairul Syahrin Fracture Toughness Analysis In Aluminium

NOV 2008 Bin Zakaria Alloy 5052 Series, Welded By Semi-

Automatic Tig Welding Technique With 45‘

73. EM220- Muktarrudin Bin Study On Fracture Toughness Of Kenaf Fibre

NOV 2008 Ismail@Kari Composite-Fiber Metal Laminate (Ffc-Fml)

74. EM220- Noor Bin Hassan Fatigue Behaviors Of Three Types Of Kenaf

NOV 2008 Fiber Constructions On Fiber Reinforce

Polymer Composites

75. EM220- Sharifah Anom Binti S Fatigue And Fracture Toughness In An

NOV 2008 Ahmad Aluminium Welded Structure By Finite

Element Model

76. EM220- Muhammad Najib Bin Fracture Toughness Analysis At Aluminium

APR 2008 Zainal Alloy 5052, Welded By Tig Welding With 45

Groove, Single Bevel Of Joint

77. EM220- Syaril Azizi Bin Shuib Improvement In Production Process At Sime

APR 2008 Kansai Paint Sdn Bhd By Doing Analysis On

A New Design Of Jigs To Hold A Drum Barrel

AWARDS

Best Paper Award, Electrodeposition of Co-Ni-Fe on Stainless Steel Bolt, International
Conference on BioMechanics and Medical Engineering 2018 (ICBME 2018), 12-14 Sept
2018

3rd Place, Anugerah Pusat Kecemerlangan Fakulti (COE) 2017 bersempena Hari Anugerah
Kualiti Dekan & Hari Apresiasi Staff Fakulti Kejuruteraan Mekanikal, 21 Mac 2018.

Anugerah Inovasi & Komersilan Terbaik 2017- (Corrosion Resistant Coating of Nano
Sized Co-Ni-Fe Bolts)

Anuegerah Perkhidmatan Cemerlang UITM bagi Tahun 2016

Gold Award, International Business Invention, Innovation & Design Competition 2016, 1-2
March 2016
Project: Co-Ni-Fe Coating Corrosion Protective Layer On Mild Steel

Best Paper Award, Kenaf as Material for Laboratory Tabletop, 5th International Conference
on Mechanical and Manufacturing Engineering 2015 (ICAME2015)

1st Place, Booth Pameran UCTC Tercantik dan Berinfomatif, Higher Education Week
(HEWM 2015), KPT, Putrajaya, 13-16 August 2015

Gold Award, Competition & Exhibition Research, Invention and Design (RiiD) 2014, UiTM
Melaka, 14-12-2014.
Project: Corrosion resistant coating of Electrodeposited Cobalt-Nickel-Iron Alloy

Gold Award, Penang Invention, Innovation and Design (PIID) 2014, UiTM Pulau Pinang, 4-
12-2014
Project: Electrodeposited Nanocrystalline CoNiFe Coating Applied onto Bolts

Bronze Medal, 1st Innovation, Invention and Design Competition Faculty of Mechanical
Engineering (IID-FKM 2012), 8th August 2012.
Project: Nanocoating on Different Substrates for Corrosion Protection

CONSULTANCY/EXPERTISE

1. Perundingan bagi Program Penyelidikan (R&D) Kerjasama Fakulti Kejuruteraan
Mekanikal UiTM bersama Syarikat AANS Technical & Service, 26 Feb 2016- 25 Feb
2020

2. Co-Supervisor, Program International Attachment from National Institute of
Technology, UBE College Japan, 21 Ogos 2017-20 Sept 2017

3. Co-Supervisor WELDING Quality Inspection, Universiti Kuala Lumpur, sese
September 2016 ( Pelajar: Muhammad Hazim Bin Roslan, Mohamad Farhan Bin
Mohamad Nor, Zainul Ariffin bin Zainal Abidin)

4. Kerjasama Geran Penyelidikan dan Pengkomersialan Vendor Bumiputera (GPPV)
dibawah Rancangan Malaysia ke 11, 6 Feb 2017

5. Workshop Demand Driven Innovation Project Public Private Research Network
(PPRN), 9-10 Mei 2016, KPT.

6. Perundingan bagi Program Penyelidikan (R&D) Kerjasama Fakulti Kejuruteraan
Mekanikal, UiTM Bersama Global View Contruction & Trading Sdn. Bhd

7. Examiner/Chairperson/Minute Taker/ Thesis MSC/PhD:

No Title University/Level Role Date

1 A study on the risk based UiTM/MSc Chair Sept 2017
maintance (RBM) approach for
power transformer

2 Study on the Causes And Effects UiTM/MSc Chair Sept 2017
Of Delay In Malaysia Contruction
Industry Specifically On
Mwchanical And Electrical (M&E)
Works

3 Assessing The Implementation Of UiTM/MSc Chair Sept 2017
Quality Standard In Malaysia
Construction Industry: A
Comparison Between Qlassic And
Conquas

4 Prediction of Epoxy UHMWPE UiTM/MSc Minute 29 Mac
Acetabular Cup Performance At Taker 2017
The New Inclination And
Anterversion Orientation

5 Development of Information UiTM/PhD Minute 5 JUN 2018
Architecture and Novel Simulation Taker
System for Pillion Assement
Workstation

6 Calon: Syafawati Muktar UiTM/MSc Chair 7 Jan 2014
Chair 7 Jan 2014
7 Calon: Muhamad Hafiz Fikri UiTM/MSc
Azizan

8 Calon: Mohd Hafizal Bin Roslan UiTM/MSc Chair 10 jun 2015

9 Processing of Aluminium Foam by UiTM/MSc Minute 30 Jun 2015
Infiltration of NaCl Space Holder Taker

10 Mechanical Properties of Kenaf UiTM/MSc Minute 18 Dec
Hybrid Composites Laminates Taker 2015

8. Contribution in Development of Malaysian Standard with SIRIM Berhad:

No Malaysian Standard Date

1 Office Furniture-Storage Furniture Part 1: Safety Requirements (2nd 28 April
Revision) MS 1315-1:2014 2014

2 Office Furniture-Storage Furniture-Part 2 : Determination of stability 28 April
and strength of the structure (2nd Revision) MS 1315-2:2014 2014

3 Method of test for finishes on wooden furniture -Part 3: Assessment 4 Jun 2013
of surface resistance to dry heat (1st Revision) MS 1215-3:2012

4 Method of test for finishes on wooden furniture -Part 4: Assessment 4 Jun 2013
of surface resistance to Cold Liquids (1st Revision) MS 1215-4:2012

5 Office Panel System -Workstations MS 2445:2012 8 April 2013

6 Furniture-Storage Units- Determination of Strength and durability (ISO 8 April 2013
7170:2005, IDT)

Furniture-Storage Furniture Part 1: Safety Requirements and test 16 Julai
7 methods for domestic and kitchen storage units and workshop (1st 2012

Revision) MS 1581-1:2012

Furniture-Storage Furniture-Part 2 : Determination of strength and 16 Julai
8 durability of domestic and contract storage furniture (1st Revision) MS 2012

1581-2:2012

9 Method of test for finishes on wooden furniture -Part 1: Assessment 2 Julai 2012
of glare by measurement specular gloss (1st Revision) MS 1215-1:2012

10 Method of test for finishes on wooden furniture -Part 2: Assessment 2 Julai 2012
of surface resistant to wet heat (1st Revision) MS 1215-2:2012

Method of test for finishes on wooden furniture -Part 5: Assessment 2 Julai 2012
11 of surface resistance to cold oils and fats(1st Revision) MS 1215-

5:2012

Method of test for finishes on wooden furniture -Part 5: Assessment 2 Julai 2012
12 of surface resistance to mechanical damage (1st Revision) MS 1215-

6:2012

9. Consultancy projects with Hilti Malaysia Sdn. Bhd, 2013

10. Consultancy projects with SGS Malaysia Sdn. Bhd. & Petrotechnical Inpection (M)
Sdn. Bhd, 2011-2012

COMMITTEES

INTERNATIONAL LEVEL

1. Session Chair, 4th International Conference On Mechanical and Manufacturing Engineering
2013 (ICME2013), 17-18 Dec 2013

2. Publication Committee in German-Malaysian Workshop Series 2014, System Engineering for
Advanced Mechatronics, 30 June-4 July 2014

3. Reviewer, International Conference on Advances in Mechanical Engineering (ICAME2015),26-
27 Ogos 2015

4. Chair Person, International Conference on Advances in Mechanical Engineering
(ICAME2015),26-27 Ogos 2015

5. Reviewer, International Conference on Advances in Mechanical Engineering (ICAME2015),
26-27 Ogos 2015

6. Special Taskforce Committee, International Conference on Advances in Mechanical
Engineering (ICAME2015), 26-27 Ogos 2015

7. Judge for poster presentation, International Conference on BioMechanics and Medical
Engineering 2018 (ICBME 2018), 12-14 Sept 2018

8. Reviewer, International Conference on BioMechanics and Medical Engineering 2018 (ICBME
2018), 12-14 Sept 2018

UNIVERSITY LEVEL

1. Vice Chairman, Seminar on Frontier Materials and Industrial Aplication 2019
(SFMIA2019), 29 August 2019

2. Vice Chairman, Seminar on Frontier Materials and Industrial Aplication 2018
(SFMIA2018), 4 Sept 2018

3. Judge, (Invention and Innovation Competition) Mini Science Technology Education
Festival 2018

4. Judge, Paper airplane competition, Science Technology Education Festival 2017
(SCITECH2017)

5. Pengarah Program, School of Junior Engineering SoJE, 17 Dec 2016
6. Pengarah Program, School of Junior Engineering SoJE, 15 Dec 2016
7. Pengarah Program, School of Junior Engineering SoJE, 08 Dec 2016
8. Reviewer, Jurnal Teknologi e-ISSN 2180-3722 ( Special Issue on Tribologi, Fluid

Dynamics and Engineering Mechanic Volume 76 No 10)-2015
9. Reviewer, Jurnal Teknologi e-ISSN 2180-3722 ( Special Issue on Engineering Design

and Material Integrity Volume 76 No 9)-2015
10. Reviewer, Jurnal Teknologi e-ISSN 2180-3722 ( Special Issue on Advances In

Mechanical Engineering Volume 76 No 11)-2015
11. Reviewer, Jurnal Teknologi e-ISSN 2180-3722 ( Special Issue on Advances in Materials

Science and Technology Volume 76 No 3)-2015
12. Higher Education Week (HEWM 2015), KPT, Putrajaya, 13-16 August 2015
13. Judge, Research Innovation Symposium & Exposition 2015 (RISE2015)
14. Event, Research Innovation Symposium & Exposition 2015 (RISE2015)
15. Jury for Sudent Innovation & Design Convention (SID2014)

FACULTY LEVEL

1. Ketua Pusat Kecemerlangan, Centre for Advance Material Research (CAMAR) 1 Mac
2017-Feb 2019

2. AHLI kumpulan Inisiatif Penyelidikan (RIG), Entiti Kecemerllangan Tier 5, Fracture
Mechanic & Materials Integrity Research Group, 10 Mei 2016-28 Mei 2018

3. Wakil MITASA, FKM, mulai 1 Sept 2018
4. AJK MyRA FKM, 1 Jan 2018- 31 Dec 2018
5. AJK Penyelidikan Fakulti (JFP), 1 Jan 2018- 31 Dec 2018
6. Ketua Pusat Kecemerlangan, Centre for Advance Material Research (CAMAR) 1 Mac

2016-Feb 2017
7. AJK Projek Pelajar II (Program Master in Management), 1 Mac 2016- 25 Feb 2017
8. AJK penyelidikan, Jawatankuasa Penyelidikan, Perundingan & Penerbitan, 1 Mac 2016-

28 Feb 2017
9. AJK Program Engineering Week 2017, 22-25 Nov 2017
10. Resource Person, Jawatankuasa Sistem Prisma, FKM, 1 Feb 2015-31 Jan 2017
11. AJK MyRA, Jawatankuasa Penyelidikan, Perundingan, Renerbitan & MyRA, FKM, 4

Jan 2016- 3 Jan 2017
12. Ahli kumpulan 7 (Hasil), Jawatan kuasa Penyediaan Dokumen Anugerah Qualiti Naib

Canselor(AKNC) FKM, 24 Mei 2016
13. Pegawai Pengiring Pelajar ke Kuala Lumpur Engineering Science Fair Mobile

Workshop (KLESF-MW 2016), 2-3 April 2016
14. Wakil Petugas Program Minggu Sains dan Matematik di Sekolah Sultan Alam Shah

2016, 31 Mac 2016
15. Pegawai Semakan Dokumen Calon Siswazah Sesi Kedua Program Master in

Engineering Management, 19 Feb 2016
16. AJK Pelaksana Jawatankuasa Perwakilan Pelajar, 29 Sept 2016,FKM
17. Panel Penilai perbentangan cadangan penyelidikan PASCA SISWAZAH, 8 April 2015
18. Pegerusi Jawatankuasa Misi Akademik, 4 Jan 2015- 3 Jan 2015
19. AJK Adhoc Pembelian Peralatan Melebihi RM500 000, Pusat Pengajian Engineering

Mechanics and Materials, 1 Jan 2015- 31 Dec 2016
20. AJK MyRA, Jawatankuasa Penyelidikan, Perundingan, Renerbitan & MyRA, FKM, 2

Jan 2015- 31 Dis 2015
21. Wakil Petugas Program Ekspo UiTM Destinasiku, 24 Jan 2015
22. Fasilitator Bengkel Penulisan Laporan Teknikal Projek Tahun Akhir, Mac 2015-julai

2015, FKM
23. Wakil Petugas untuk Program Pameran Karnival Pendidikan Tinggi Kali ke 11 tahun

2013 (Misi Akedemik) bg Fakulti Kejuruteraan Mekanikal, 14-15 Feb 2015
24. Program Suspended Meal, FKM Penyayang Sesi 2015
25. Ahli (Kump.7) Jawaankuasa Penilai Kualiti, FKM, 2 Jan 2015-31 Dis 2015
26. Ahli Jawatan Kuasa Research Innovation Symposium & Exposition (RISE 2015), 2 Jan

2015- 31 Dis 2015
27. Pengerusi Bersama for Program Engineering Mechanics, Materials and Dynamic

Workshop 2014, 14-16 April 2014
28. Penceramah for Program Engineering Mechanics, Materials and Dynamic Workshop

2014, 14-16 April 2014
29. Fasilitator for Program Engineering Mechanics, Materials and Dynamic Workshop 2014

30. AJK Program dan Penganugerahan Program Industry Outreach 2014, FKM
31. AJK Anugerah Kualiti Naib Cancelor (AKNC) 2014,FKM
32. AJK Perbentangan Akhir AKCN 2014, FKM
33. Koordinator Kursus Basic (MEC611) 2014, FKM
34. Ahli Pasukan Kerja ISO 9001:2000, FKM, 28 Feb 2008 -1 Mac 2009

COMMUNITY SERVICE

1. Fasilitator, Program I WANT TO BE AN ENGINEER, Sk Seksyen 7, Shah Alam
2. Pengarah Program, School of Junior Engineering SoJE, 8, 15, 17 Dec 2016
3. Fasilitator, Hari Usahawan SK Taman Tun Teja

PARTICIPATION IN
EXHIBITIONS/COMPETITIONS/WORKSHOPS/SEMINARS/CONFERENCES

1. Invention, Innovation and Design Exposition 2018 (iidex2018), 24-28 September 2018
2. Emerging Research Leaders Series (ERLS) Bengkel Penulisan Jurnal, 25-27 Julai 2018
3. Menyempurnakan Proposal Penyelidikan FRGS siri 1/2017- Dry Abrasive and Slurry

Wear of Co-Ni-Fe on Steel Thin Film
4. Small and Medium Industries Exibbition (SMIDEX 16), 17-19 May 2016
5. 5th International Conference on Advances in Mechanical Engineering (ICAME2017),

Krabi, Thailand, 16-18 August 2017
6. Kursus Indusi Pentauliahan Persijilan Kemahiran Malaysia (PP-PPD-PPB), 27 & 28

Ogos 2016
7. Welding Simulation uding Simufact.Welding, 4 days International Workshop, 29th

Nov-2 Dec 2016
8. International Business Invention, Innovation & Design Competition 2016, 1-2 March

2016
9. Minggu Sanis dan Matematik 2016, Sekolah Sultan Alam Shah, 25-31 Mac 2015
10. 4th International Conference on Advances in Mechanical Engineering (ICAME2015),

PatraJasa, Bali, Indonesia26-27 August 2015
11. Materials Science Workshop 2015, ridging SEM & LSM Imaging with Ease, 29-30

April 2015
12. Scanning Electron Microscope, 20 May 2015
13. KLESF Mobile Workshops, SMK Seri Perak, Teluk Intan, Perak.
14. Participant, Materials Lecture Competition 2014, 3 April 2014
15. 2nd International Conference on System-integrated Intelligence: New Challenges for

Product and Production Engineering (Syslnt 2014), 2-4 July 2014, Bremen, Germany
16. Penang Invention, Innovation and Design (PIID 2014), 3-4 Dec 2014
17. Competition & Exibition Research, Invention, Innovation and Design (RiiD 2014), 13-

14 Dec 2014

18. Oral Presentation, 4th International Conference on Mechanical and Manufacturing
Engineering 2013 (ICME2013)- Effect of Different Water Absorbtion on Mechanical
Properties of Kenaf and Kenaf Hybrid Polyester

19. Malaysian International Tribology Conference 2013, Sabah, 18-20th Nov 2013
20. 1st Innovation, Invention and Design Competition Faculty of Mechanical Engineering

(IID-FKM 2012), 8th August 2012.
21. Seminar on Failure Analysis of Metallic and Composite materials dengan LT

Technology Scientific (M) Sdn Bhd and Hi-Tech Instrument Sdn., 2009
22. 2nd Internation Conference on Science & Technology: Applications in Industry and

Education, 12-13th Dec 2008