Mattings

Mattings

Specification Sheets

Issue 1 May 2018

Sample swatches available
on request

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade COW

Colour BLACK

Elastomer NR/SBR

Quality ANIMAL MAT

Hardness Shore A ±5 70° ISO 7619-1
ISO 2781
SG (g/cm²) 1.55 ISO 37
ISO 37
Tensile (N/mm²) 4 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression % 43

Tear Strength 12

Abrasion mm³

Temperature (° C) from -20

Temperature (°C) to 70

Roll Tolerances Thicknesses available

Width tolerance: +/- 2% ISO 3302 SW1 17mm ●1.22m x 1.83m
Length tolerance: +/- 2% ISO 3302 SW1

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N25

Colour BLACK/FAWN/BLUE GREY

Elastomer NR/SBR

Quality DECK TOP MATTING

Hardness Shore A ±5 70° ISO 7619-1
ISO 2781
SG (g/cm²) 1.5 ISO 37
ISO 37
Tensile (N/mm²) 3 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression %

Tear Strength

Abrasion mm³

Temperature (° C) from -30

Temperature (°C) to 70

Roll Tolerances +/- 2% ISO 3302 SW1 Thicknesses available ●
+/- 2% ISO 3302 SW1
Width tolerance: 3mm and 6mm .914m, 1m,
Length tolerance: 1.22m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N11E

Colour BLACK

Elastomer NR/SBR

Quality ECONOMY FINE FLUTED

Hardness Shore A ±5 65° ISO 7619-1

SG (g/cm²) 1.5 ISO 2781

Tensile (N/mm²) 2.5 ISO 37

Elongation % 200 ISO 37

Compression % ISO 37

Tear Strength ISO 34-1

Abrasion mm³ ISO 37

Temperature (° C) from

Temperature (°C) to

Roll Tolerances +/- 2% ISO 3302 SW1 Thicknesses available ●
+/- 2% ISO 3302 SW1
Width tolerance: 3mm and 6mm .914m, 1m,
Length tolerance: 1.22m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N11

Colour BLACK

Elastomer NR/SBR

Quality FINE FLUTED

Hardness Shore A ±5 70° ISO 7619-1
ISO 2781
SG (g/cm²) 1.5 ISO 37
ISO 37
Tensile (N/mm²) 3.5 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression % 43

Tear Strength 12

Abrasion mm³ 480

Temperature (° C) from -20

Temperature (°C) to 70

Roll Tolerances +/- 2% ISO 3302 SW1 Thicknesses available ●
+/- 2% ISO 3302 SW1
Width tolerance: 3mm and 6mm .914m, 1m,
Length tolerance: 1.22m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N12 and N12 xw

Colour BLACK

Elastomer NR/SBR

Quality BROAD FLUTED/EXTRA WIDE BROAD

FLUTED

Hardness Shore A ±5 70° ISO 7619-1

SG (g/cm²) 1.5 ISO 2781

Tensile (N/mm²) 3.5 ISO 37

Elongation % 300 ISO 37

Compression % 43 ISO 37

Tear Strength 12 ISO 34-1

Abrasion mm³ 480 ISO 37

Temperature (° C) from -20

Temperature (°C) to 70

Roll Tolerances +/- 2% ISO 3302 SW1 Thicknesses available ●
+/- 2% ISO 3302 SW1
Width tolerance: 3mm and 6mm .914m, 1m,
Length tolerance: 1.22m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N13

Colour BLACK

Elastomer NR/SBR

Quality CIRCULAR STUD

Hardness Shore A ±5 70° ISO 7619-1

SG (g/cm²) 1.50 ISO 2781

Tensile (N/mm²) 3.5 ISO 37

Elongation % 300 ISO 37

Compression % 43 ISO 37

Tear Strength 12 ISO 34-1

Abrasion mm³ 480 ISO 37

Temperature (° C) from -20

Temperature (°C) to 70

Thicknesses available

Roll Tolerances +/- 2% ISO 3302 SW1 3mm ●1.22 x 10m
Width tolerance: ISO 3302 SW1

Length tolerance: +/- 2%

0.5– 2mm +/- 0.2mm ●Items listed above usually ex stock.
2mm –4mm +/- 0.3mm
5mm—6mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x
6mm-10mm +/- 0.5mm 10m
10mm-15mm +/- 0.8mm Other thicknesses and sizes available, please
20mm +/- 1mm contact sales office for your requirements
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 8 October 2017

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N25

Colour BLACK/FAWN/BLUE GREY

Elastomer NR/SBR

Quality DECK TOP MATTING

Hardness Shore A ±5 70° ISO 7619-1
ISO 2781
SG (g/cm²) 1.5 ISO 37
ISO 37
Tensile (N/mm²) 3 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression %

Tear Strength

Abrasion mm³

Temperature (° C) from -30

Temperature (°C) to 70

Roll Tolerances +/- 2% ISO 3302 SW1 Thicknesses available ●
+/- 2% ISO 3302 SW1
Width tolerance: 3mm and 6mm .914m, 1m,
Length tolerance: 1.22m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N27

Colour BLACK

Elastomer NR/SBR

Quality 1 BAR CHECKERPLATE/ RHOMBOID

Hardness Shore A ±5 70° ISO 7619-1
ISO 2781
SG (g/cm²) 1.50 ISO 37
ISO 37
Tensile (N/mm²) 3.5 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression % 43

Tear Strength 12

Abrasion mm³ 480

Temperature (° C) from -20

Temperature (°C) to 70

Roll Tolerances Thicknesses available

Width tolerance: +/- 2% ISO 3302 SW1 3mm .1.22m and ●
Length tolerance: +/- 2% ISO 3302 SW1 1.4m x 10m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N28

Colour BLACK

Elastomer NR/SBR

Quality CHECKERPLATE

Hardness Shore A ±5 65° ISO 7619-1
ISO 2781
SG (g/cm²) 1.5 ISO 37
ISO 37
Tensile (N/mm²) 3.5 ISO 37
ISO 34-1
Elongation % 300 ISO 37

Compression % 43

Tear Strength

Abrasion mm³

Temperature (°C) from -20

Temperature (°C) to 70

Roll Tolerances Thicknesses available

Width tolerance: +/- 2% ISO 3302 SW1 3mm .1.22m and ●
Length tolerance: +/- 2% ISO 3302 SW1 1.4m x 10m

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm 10mm thick available in 1.4m x 5m and 1.4m x 10m
5mm—6mm +/- 0.5mm Other thicknesses and sizes available, please contact
6mm-10mm +/- 0.8mm sales office for your requirements
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018

J P Polymer Sheetings Limited

Natural NR/SBR

SPECIFICATION SHEET

Grade N48

Colour BLACK

Elastomer NR/SBR

Quality HAMMERBLOW

Hardness Shore A ±5 65° ISO 7619-1
ISO 2781
SG (g/cm²) 1.5 ISO 37
ISO 37
Tensile (N/mm²) 3 ISO 37
ISO 34-1
Elongation % 200 ISO 37

Compression %

Tear Strength

Abrasion mm³

Temperature (° C) from -20

Temperature (°C) to 70

Roll Tolerances Thicknesses available

Width tolerance: +/- 2% ISO 3302 SW1 4mm .1.4m ●
Length tolerance: +/- 2% ISO 3302 SW1

Thickness +/- 0.2mm ●Items listed above usually ex stock.
0.5– 2mm +/- 0.3mm
2mm –4mm +/- 0.4mm Other thicknesses and sizes available, please contact
5mm—6mm +/- 0.5mm sales office for your requirements
6mm-10mm +/- 0.8mm
10mm-15mm +/- 1mm
20mm
25mm +/- 1.25mm
30MM +/- 1.5mm

QUALITY ASSURED PRODUCTS WITH FULL TRACEABILITY

Care should be taken in selecting the most suitable quality for each application.
Advice is available but final responsibility remains with the customer.

Issue 1a March 2018