Glycol Chiller troubleshooting flowchart

Glycol Chiller Troubleshooting flow chart

Customer Issue

Suspected Leak Not Cooling not reaching low temp Check Pumping Chiller Not Pumping
Check if it is water Check Glycol Chiller Temp
Glycol Does Line Light up
Set Chiller to -4.5C Check M12 Connection Check other
Check Conical Target temp to Conical Lines Check pump power
connection
Water Check Conical Controller
Connection to base plate Replace
Glycol unit

Check: Condensation Cant get below temp Replace controller Check flow rate through fermenter
Fermenter cooling sleeve between 4-12C Replace PCB should be 1L per min
Glycol filter cap No Action. Can mitigate Tech Team
using conical Coat& jacket Inversion. Send lagering Check connections to find the blockage
Cooling sleeve Glycol cap document and replace component

Possible refund

Check coupler Replace o ring
& cooling Replace Cap
sleeve
O rings

Replace o ring Replace
Glycol unit
Replace
Fermenter