Reuland & Turnbough Catalog

Pictorial Map
and Guide

Greenwood Memorial Park

3100 White Settlement Road at University Drive | Fort Worth
817.336.0584

Mount Olivet Cemetery & Crematory

Sylvania Avenue at Northeast 28th Street | Fort Worth
817.831.0511

Gentle Visitor

Welcome. We are pleased to have you visit Greenwood Memorial Park and Mount Olivet
Cemetery. It is our sincere desire that you share with us their peace and beauty. Throughout both
cemeteries you will find tranquility and reverence amid the soft shadowed lawns and native trees.
Visiting hours are from 8:00 in the morning until sunset.

A Place to Remember

Mount Olivet’s 130 acres of wooded grounds were dedicated on May 1, 1907, as the first
endowment care cemetery of this area. Greenwood, with its 196 acres of rolling lawns and stately
native trees, was dedicated on March 30, 1909.
Each cemetery has its own funeral home, two chapels and flower shop. In addition for
Arlington area residents, Greenwood’s Arlington Chapel and Crematory is centrally located at 1221
East Division Street and our state-of-the-art crematory is located on the grounds of Mount Olivet.
Patrons of any of our cemeteries or funeral homes can conveniently consult with one person for
all funeral, burial and cremation arrangements.
For those who desire above-ground burial, there is a mausoleum at both Greenwood and
Mount Olivet. The magnificent Greenwood Mausoleum has received a statewide architectural design
award and is visited from time to time by architects and architectural students from throughout
the world. The garden mausoleum overlooking the beautiful lawn of the Garden of Memories at
Mount Olivet has also received wide acceptance by those who prefer above-ground entombment.
Each of the cemeteries has a Churchyard Section where the ownership of the cemetery space
remains with the cemetery but permanent memorialization and burials are provided at the lowest
possible cost. Further information on the use of graves is available at the cemetery and funeral
home offices. For those who prefer, all funeral, burial and cremation arrangements may be made in
advance at any of our funeral home locations.

Unique Ownership

Greenwood and Mount Olivet Cemeteries are owned and managed by Mount Olivet Cemetery
Association, a non-profit corporation. No one has a proprietary interest in the organization.
Mount Olivet Cemetery Association, Greenwood Endowment Care Trust and Mount Olivet
Endowment Care Trust are qualified to receive charitable contributions under the provisions of the
United States Internal Revenue Code.
The funeral homes and flower shops are owned by Greenwood-Mount Olivet Company, a
profit corporation, wholly owned by Mount Olivet Cemetery Association. After federal income
taxes are paid on the earnings of this company, all the net earnings of the funeral homes, flower
shops and the cemeteries are used exclusively for the care and maintenance of the cemeteries.

Secure for Generations to Come

To further insure the future maintenance of the cemeteries, irreducible endowment care trust
funds are held by a major bank. The trust funds increase by a perpetual care trust deposit in the
amount of 20% for each cemetery space, crypt or niche purchase.
The rules and regulations are designed to ensure the safety of visitors and employees and to
further the best maintenance of the lawns. Your cooperation is sincerely appreciated. For further
information, you are invited to make inquiry at our cemetery offices.

Funeral Homes • Cemeteries • Mausoleums • Crematory • Flower Shops • Memorials

Funeral Homes and Crematories

183

B 360
Mount Olivet
30 C
A Chapel
Greenwood Arlington
Chapel Chapel

820
35W

20

A

GREENWOOD CHAPEL
Located within Greenwood Memorial Park, our Greenwood Chapel location offers
every funeral and burial service at one convenient location. The funeral home with its
inspiring chapels and quiet garden is recognized as one of the nation’s most outstanding.

B
MOUNT OLIVET CHAPEL
Overlooking picturesque Willow Lake, Greenwood’s Mount Olivet Chapel welcomes
all visitors to an atmosphere of peace and comfort. The funeral home is conveniently
located in Fort Worth’s historic Northside and on the tree-filled grounds of Mount
Olivet Cemetery.

C
ARLINGTON CHAPEL – ARLINGTON CREMATORY
Greenwood’s Arlington Chapel and its Arlington Crematory were established to provide
the best funeral and cremation services to the Greater Arlington Grand Prairie area. This
beautiful funeral home and modern crematory is conveniently located next to AT&T Stadium
and only 15 miles from our beautiful perpetual-care cemeteries.

A
GREENWOOD MAUSOLEUM
Named by the Texas Society of Architects as one of the outstanding architectural
achievements found in the state, Greenwood Mausoleum, with its Independence Chapel,
is one of the most distinctive mausoleums in America.

B
GREENWOOD-MOUNT OLIVET CREMATORY
Located on the grounds of Mount Olivet Cemetery is the state-of-the-art Greenwood-
Mount Olivet Crematory, for the exclusive use of Greenwood and Mount Olivet.

Greenwood Memorial Park

WILDWOOD

ALL AREAS: UP TO THREE "SIMPLICITY" BURIALS PERMITTED WITH BIODEGRADABLE (E.G. WOODEN) COFFINS.
SHADED AREAS: ONE "B-LEVEL" BURIAL PERMITTED IN PERMANENT OUTER BURIAL CONTAINER.
UNSHADED AREAS: TWO "A/B - LEVEL" BURIALS PERMITTED IN PERMANENT OUTER BURIAL CONTAINERS.

HILLCREST HILLSIDE
GARDEN GARDEN

OAKRIDGE

ADORATION 39
GARDEN
WILDWOOD
T
WESTLAWN WOODLAWN DEVOTION RESTHAVEN R
GARDEN 40 IN
IT
OAKLAWN 38 Y
GARDEN
CHURCHYARD R I V E RP A R K
36 DRIVE

BETHEL
41

GARDEN OF 40-A MEDITATION BENEDICTION (3-K) (4-K)
RESTFUL 37 35
OAKS (2-K) HARMONY
SECTION 34 33
URN
(2-H) (3-H) (4-H) G GARDEN

WESTLAWN (0-H) BLUEBIRD

32

FL O T U 45MASONIC(3-D)(4-D) W E R C IR (1-E)AK CLE(2-E)(3-E) (4-E) (5-H)
X 42
LIVE OAK GARDEN V E S P E R L A N D 31
43
GARDEN OF RESURRECTION (6-D) (5-D) (8-E) (7-E) (6-E) (5-E) (6-H) UNIVERSITY DRIVEAHAVATH
PEACE (11-E) (12-E) SHOLOM
44 (9-H)
(11-D) (12-D) (9-E) (10-E) (10-H)

URN
GARDEN

(7-H)

(14-D) (13-D) (16-E) (15-E) (14-E) (13-E) (8-H) REPOSE 30

X GARDEN OF LOVE R NE R O
X
(1-B) (2-B) FAITH CHAPEL GARDEN
MAINTENANCE MEMORY LAWN 28 29

FUNERAL FUNERAL
PARKING PARKING
INDEPENDENCE
CHAPEL CHAPEL
PARKING
MAUSOLEUM
MAUSOLEUM

PARKING
FAMILY

PARKING
CHAPEL

LIVE OAK
ROOM
FUNERAL HOME

MAIN ENTRANCE PARKING PARKING

WHITE SETTLEMENT ROAD FUNERAL HOME AND CEMETERY
ADMINISTRATIVE OFFICES
GREENWOOD MEMORIAL PARK
REVISED: 02/05/2016

Burial Information

NO OUTSIDE CONTAINER REQUIRED
Simple wooden caskets, the outside measurements of which do not exceed 191/2 inches in height
and 27 inches in width, may be buried in all grave spaces in the cemeteries without any outside
container. Detailed information on burials with no outside container is available at the cemetery and
funeral home offices. If this type of burial is not used, the following prevails:

OUTSIDE CONTAINER REQUIRED TO PREVENT SUNKEN GRAVES

UNSHADED AREAS SHADED AREAS
Two (2) Interments Permitted One (1) Interment Permitted

The Special Cemetery Container or a concrete Only the “B” level interment location
vault is required for the “A” level interment location is allowed in areas that are shaded.
of grave spaces located in areas that are not shaded. Any permanent outside container is
Any permanent outside container may be used for allowed here.
“B” level interments.

Mount Olivet Cemetery

ALL AREAS
Unlimited interments permitted with

simple wooden coffins
SHADED AREAS
One burial permitted in permanent
outside containers
UNSHADED AREAS
Two burials permitted in permanent
outside containers

Flower Placement Information

GREENWOOD MEMORIAL PARK
MOUNT OLIVET CEMETERY

Fresh-cut flowers may be placed in approved cemetery vases throughout the year. Flowers
that no longer have a fresh appearance will be removed and disposed of by the cemetery staff.
From February 2 until Thanksgiving Day, only fresh-cut flowers in approved cemetery
vases are permitted except during the holidays shown below.
From Thanksgiving Day until February 1, the normal period when the cemetery’s lawns are
dormant, artificial flowers in approved cemetery vases, easel and basket arrangements, potted
plants, wreaths and grave blankets are permitted. Beginning February 2, they will be removed
by the cemetery staff.
For Valentine’s Day, Easter, Mother’s Day, Father’s Day, Memorial Day, the 4th of July
and Veteran’s Day, artificial flowers in approved cemetery vases, wreaths, potted plants, easel
and basket arrangements may be placed three (3) days before the holiday. One week after the
holiday, they will be removed by the cemetery staff.

Please remember:
• No fences or borders of flowers, rocks, wood, metal, etc.
• No toys, except as an integral part of an arrangement
• No wind chimes or other ornamentation may be placed in trees, on stands
or in planting beds
• No digging or planting
• No loose objects placed on the grave or marker
• No food, drink or picnicking
• No glass objects, including vases
• Keep roadways open for other visitors

MOUNT OLIVET GARDEN OF MEMORIES MAUSOLEUM
GREENWOOD MAUSOLEUM

Fresh cut and artificial flowers may be placed in approved mausoleum vases throughout
the year except in the Trinity Columbarium which allows only fresh cut flowers. Flowers that
no longer have a fresh appearance will be removed and disposed of by the mausoleum staff.
Floral arrangements must be limited in size so as not to infringe on an adjoining crypt.
Please do not place pot plants on the floor of the building, since every precaution must be
taken to prevent discoloration of the marble and tile.
For further information, you are cordially invited to make inquiry at the offices of the
individual cemeteries.

Your cooperation in observing this schedule is sincerely appreciated.

GreenwoodMemorialPark.com
MountOlivetCemetery.com

GreenwoodFuneralHomes.com

2-2016

GLOSSARY OF MEMORIAL TERMS

READING AND WRITING SIZES

SIZES ARE ALWAYS WRITTEN AS LENGTH X WIDTH X HEIGHT

HEIGHT MONUMENT DIE LENGTH - 36” WRITTEN AS 3-0
1-8 WIDTH - 6” WRITTEN AS 0-6
LENGTH HEIGHT - 20” WRITTEN AS 1-8
WIDTH 3-0 THIS IS A: 3-0X0-6X1-8
0-6
MONUMENT BASE MONUMENT DIE
HEIGHT
0-6 LENGTH LENGTH - 48” WRITTEN AS 4-0
WIDTH 4-0 WIDTH - 12” WRITTEN AS 1-0
1-0 HEIGHT - 6” WRITTEN AS 0-6
THIS IS A: 4-0X1-0X0-6

MONUMENT BASE

SEAT SEAT
LENGTH - 48” WRITTEN AS 4-0
LENGTH - 48” WRITTEN AS 4-0 WIDTH - 16” WRITTEN AS 1-4
WIDTH - 16” WRITTEN AS 1-4 HEIGHT - 4” WRITTEN AS 0-4
HEIGHT - 4” WRITTEN AS 0-4

WIDTH WIDTH
1-4 1-4
LENGTH
4-0 LENGTH
4-0
HEIGHT BENCH BENCH
0-4 SEAT SEAT

HEIGHT
0-4

WIDTH HEIGHT
0-4 1-2

SUPPORT BENCH
LENGTH - 42”= 3-6 SUPPORT

LEG HEIGHT WIDTH - 8”= 0-8
1-2 LEG HEIGHT - 16”=1-2

LENGTH - 14” WRITTEN AS 1-2 LENGTH
WIDTH - 4” WRITTEN AS 0-4 3-6
HEIGHT - 14” WRITTEN AS 1-2
LENGTH WIDTH
1-2 0-8

THIS IS A BENCH: SEAT 4-0X1-4X0-4 THIS IS A BENCH: SEAT 4-0X1-4X0-4
LEGS 1-2X0-4X1-2 SUPPORT 3-6X0-8X1-2

REFERENCE FOR SIZES

62” = 5-2 74” = 6-2 86” = 7-2 98” = 8-2 110” = 9-2
64” = 5-4 76” = 6-4 88” = 7-4 100” = 8-4 112” = 9-4
66” = 5-6 78” = 6-6 90” = 7-6 102” = 8-6 114” = 9-6
68” = 5-8 80” = 6-8 92” = 7-8 104” = 8-8 116” = 9-8
70” = 5-10 82” = 6-10 94” = 7-10 106” = 8-10 118” = 9-10
72” = 6-0 84” = 7-0 96” = 8-0 108” = 9-0 120” = 10-0

SECTION A - PAGE 6

GLOSSARY OF MEMORIAL TERMS

STONE TREATMENTS/FINISHES

POL. 5 DIE W/SERP TOP ALL SAWN DIE W/SERP TOP
POL. 5 BASE ALL SAWN BASE

COMMON MONUMENT STYLES

POL. 5 DIE W/SERP TOP HALF SERP TOP
POL. TOP & BEVEL FRONT W/CHAMFERS
BASE, BRP & CHECKS

DOUBLE HEART

POL. 3 DIE W/SERP TOP, BRP STRAIGHT TOP
POL. TOP W/POL. 0-2 MARGIN
BASE, BRP OVAL TOP

POL. 2 DIE W/SERP TOP, BRP SERPENTINE TOP HALF SERP TOP
POL. TOP BASE, BRP

SECTION A - PAGE 7

GLOSSARY OF MEMORIAL TERMS

MEMORIAL TERMS ILLUSTRATED

CAP

DIE COLUMN
W/FLUTES

BASE DIE
W/BEVEL WINGS
FRONT

PLYNTH
BASE

SCOTIA
SHOULDER

CHAMFER

MEMBERS

SCOTIA
FILLET
BEAD

ROUND

CHECK
BAND
BEAD/MOLDING

SCOTIA

NOSING

DROP
WASH

MARGIN
PITCHING

SECTION A - PAGE 8

SANDBLASTING TECHNIQUES

Square Raised
Round Raised

SECTION A - PAGE 9

FONT STYLES

These font styles are recommended.

SECTION A - PAGE 10

FONTS AND DESIGN RECOMMENDATIONS

The intent of this guide is to help simplify the process of design layout and font
selection. Determining the design that best represents your client’s legacy is critical.
Please consider allowing our team of designers the freedom to select font size,
allowing you more time to focus on the specific design elements that represent the life
being memorialized. Our staff is committed to providing a design that blends the
elements chosen with our knowledge of memorialization to create the best lasting
tribute.

INFANT MARKERS
Infant markers are limited by the amount of space
available for design and lettering. BCMN196 is an
example of a well balanced layout. Vermarco is
the most recommended font choice, while
additional options include RC Gothic and
University. Brush Script can be used for small
verse or title applications.

PLEASE NOTE: The examples shown in the catalog are an excellent resource for
visual perspective. When design challenges present themselves, please know our
team of designers are ready to assist you with solutions.

BCMN192 BCMN180

BCMN159

ADULT SINGLE MARKERS
The above samples represent options of lettering and designs that can be applied when
designing single markers. Any adult single marker design shown within the catalog
can be used in creating a flush, bevel or slant memorial. Recommended fonts are
Optima, Roman, Fritz and Zurich.

SECTION A - PAGE 11

FONTS AND DESIGN RECOMMENDATIONS

COMPANION MARKERS
The companion flat marker designs shown within this book will also work on
companion slants and in many cases upright monuments. Extra design elements can
be considered due to additional space. Fonts recommended are Roman, Goudy, Fritz
and Optima. We recommend Vermarco or brush script when requesting marriage
dateds, maiden names and verses.

STANDARD MONUMENTS AND BCMN DESIGNS
The recommended fonts on our FONT STYLES SECTION A - PAGE 10 will work well
with any STANDARD MONUMENT or BCMN CUSTOM DESIGNS. There are many
more fonts and options available, please contact us about custom fonts and their
suitability for unique designs. Keep in mind that our designers are willing to choose a
font on your behalf with some simple guidance, such as “use a traditional font” or
“contemporary font” or “stylish script”. Simple font styles like Vermarco are always
recommended choices when including marriage dates, maiden names, titles and
verses.

BCMN112 BCMN111

MOORE DRAKE Ma rtin

SECTION A - PAGE 12

PRODUCTION OPTIONS

PRODUCTION TECHNIQUE COMPARISON

THESE EXAMPLES SHOW DIFFERENT DESIGN SOLUTIONS BASED ON THE SAME DESIGN INFORMATION

SANDBLAST INCISED BCMN241

Entire scene is sandblast incised.(See Sandblasting Techniques Page A9)
Can be done on any color granite.
Detail is limited.

HAND ETCHING

Design is drawn by hand on the stone face with diamond tipped engraving tools. Lettering is
Sandblast Incised or Frost. (See Sandblasting Techniques Page A9)
Black granite is preferred.
High detail is possible, provides a more artistic and warm overall look.

SECTION A - PAGE 13

PRODUCTION OPTIONS

lines.

SECTION A - PAGE 14

PRODUCTION OPTIONS

On the following pages you will find a guide
to creating a unique design using individual
elements that are available to you.

SECTION A - PAGE 15

MEMORIAL DESIGN WITH INTERCHANGEABLE ELEMENTS

SECTION A - PAGE 16

FAMILY
NAME
PANELS

This template page focuses on
the upper portion of the
memorial. Please note: these
elements are interchangeable;
but in some cases are limited
due to available space.

SECTION A - PAGE 17 MEMORIAL DESIGN WITH INTERCHANGEABLE ELEMENTS

This template page focuses on the
lower portion of the memorial.
Please note: these elements are
interchangeable; but in some cases
are limited due to available space.

DESIGN SAMPLES

MONUMENTS DESIGNED USING INTERCHANGEABLE ELEMETS

BCMN083DEERBORNE BCMN052MENDEZ
ELEMENTS USED: 103A, 36, 67 ELEMENTS USED: 118, 76, 49
FONTS USED: BRUSH SCRIPT, ROMAN, COMMERCIAL SCRIPT
FONTS USED: OPTIMA

BCMN220CLARKTON BCMN094HANTON
ELEMENTS USED: 44, 29 ELEMENTS USED: 19, 97
FONTS USED: FRITZ, ZURICH FONTS USED: FRITZ, VERMARCO

The monument designs shown on this
page were designed using only the
Interchangeable Elements in Section A
pages 16 and 17, the BCMN Custom
Designs from Section B, pages 6, 8, 9
and 12 and fonts from Section A page
10. As you can see the design
possibilities are almost limitless. This
catalog is a tool that can assist in crafting
designs that can be unique and personal
to each individual customer.

BCMN005RALSTOM
ELEMENTS USED: 100, 78, 92
FONTS USED: ROMAN, VERMARCO

SECTION A - PAGE 18

BCMN CUSTOM DESIGNS

BCMN054
2 WINGS 2-0X0-6X3-0 ALL POLISHED W/CHAMFERS

PLYNTH 2-0X0-10X0-6 ALL SAWN
VASE 0-6X1-0 POLISHED

BASE 6-0X1-2X0-6 POLISHED TOP W/0-2 POLISHED MARGIN, BRP

BCMN055
DIE 3-0X0-6X2-4 POLISHED 2, SAWN TOP, BRP

BASE 4-0X1-0X0-6 POLISHED TOP, BRP

BCMN056
DIE 4-0X0-6X2-10 ALL POLISHED W/CHAMFERS

BASE 4-6X1-0X0-6 ALL POLISHED

BCMN057
DIE 2-6X0-6X2-0 POLISHED 2, BRP
BASE 3-6X1-0X0-6 POLISHED TOP

W/0-2 POLISHED MARGIN, BRP

SECTION B - PAGE 1

BCMN CUSTOM DESIGNS

BCMN058
DIE 4-6X0-8X2-6 ALL POLISHED
BASE 6-0X1-2X0-8 POLISHED TOP W/0-2

POLISHED MARGIN

BCMN059
DIE 5-6X0-8X3-0 POLISHED 3 W/UNPOLISHED

ROUNDED, FLUTED ENDS
BASE 7-0X1-2X0-8 POLISHED TOP W/0-2

POLISHED MARGIN, BRP

Sanchez BCMN060
DIE 5-0X0-8X2-8 ALL POLISHED
BASE 7-0X1-2X0-8 POLISHED TOP W/ 0-2

POLISHED MARGIN, BRP
VASES 0-6X1-0 POLISHED

SECTION B - PAGE 2

BCMN CUSTOM DESIGNS

BCMN061
3 PC. DIE 3-6X0-6X2-4 ALL POLISHED W/SAWN CONTOUR

BASE 4-6X1-0X0-6 POLISHED TOP
W/0-2 POLISHED MARGIN, BRP

BCMN242
DIE 2-0X0-6X3-0 ALL POLISHED
BASE 3-0X1-0X0-6 POLISHED TOP
W/0-1.5 POLISHED MARGIN, BRP

BCMN004
DIE 2-6X0-8X4-2 ALL POLISHED W/CHAMFERS

BASE 3-6X1-2X0-8 POLISHED TOP, BRP

SECTION B - PAGE 3

BCMN CUSTOM DESIGNS

BCMN065
DIE 3-6X0-6X2-0 ALL POLISHED
BASE 5-0X1-0X0-6 POLISHED TOP
W/0-2 POLISHED MARGIN, BRP
VASE 0-7X0-10 POLISHED, SQUARE

BCMN066
DIE 2-2X0-8X3-6 ALL POLISHED, W/RELIEF SCULPTURE

2 WINGS 1-8X0-6X1-8 ALL POLISHED
BASE 6-0X1-2X0-8 POLISHED TOP
W/0-2 POLISHED MARGIN, BRP

Canter BCMN067
DIE 4-0X0-10X3-0 ALL POLISHED W/UNPOLISHED

WEEPING ANGEL
BASE 5-0X1-6X0-8 POLISHED TOP
& POLISHED BEVEL FRONT, BRP

BCMN064
DIE 4-8X0-8X2-8 POLISHED 3, BRP
BASE 6-0X1-2X0-8 POLISHED TOP W/ 0-2 POLISHED MARGIN, BRP
2 VASES 0-6X0-10 ALL POLISHED

SECTION B - PAGE 4

BCMN CUSTOM DESIGNS

BCMN069
CROSS 1-8X0-8X3-0 ALL POLISHED W/SETBACKS

PLYNTH 2-4X1-0X0-4 ALL POLISHED
WINGS 2-2X0-6X1-8 ALL POLISHED W/SETBACKS
BASE 6-0X1-4X0-8 POLISHED TOP & POLISHED

BEVEL FRONT, BRP

MENDEZ

BCMN013
DIE 3-6X0-8X2-2 POLISHED 2, BAL. SAWN

BASE 4-6X1-2X0-8 POLISHED TOP, BRP

BCMN001
DIE 2-6X0-8X4-2 ALL POLISHED W/CHAMFERS
BASE 3-6X1-2X0-8 POLISHED TOP & POLISHED BEVEL FRONT, BRP

SECTION B - PAGE 5

BCMN CUSTOM DESIGNS

BCMN071
DIE 3-8X0-8X2-4 POLISHED 2, BAL. SAWN
BASE 4-6X1-2X0-8 POLISHED TOP, 0-6 POLISHED BEVEL

FRONT, BRP
GRANITE STATUE 1-9X2-4

IRWIN BCMN052
DIE 3-0X0-8X4-0 ALL POLISHED
Simpson BASE 5-4X1-2X0-8 POLISHED TOP, POLISHED 0-2 MARGIN
VASES 0-8X0-8X1-0 ALL POLISHED, SQUARE

BCMN010
DIE 3-0X0-6X2-0 POLISHED 2, BRP
BASE 4-0X1-2X0-6 POLISHED TOP, POLISHED

BEVEL FRONT, BRP

SECTION9BC- PAGE 6

BCMN CUSTOM DESIGNS

BCMN072
DIE 3-0X0-8X2-2 ALL POLISHED
PEDESTAL 1-2X0-10X0-4 ALL POLISHED
BASE 5-0X1-2X0-6 ALL POLISHED

GRANITE STATUE 1-2X2-6

BCMN073
WINGS 1-10X0-8X2-0 ALL POLISHED W/CHAMFERS

PLYNTH 2-0X0-10X0-6 ALL POLISHED
BASE 5-6X1-2X0-8 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP
GRANITE STATUE 0-10X2-8

BCMN074
DIE 3-6X0-8X2-2 ALL POLISHED W/CHAMFERS
BASE 4-6X1-2X0-8 POLISHED TOP, POLISHED BEVEL

FRONT, BRP
GRANITE STATUE 0-10X2-0

SECTION B - PAGE 7

BCMN CUSTOM DESIGNS

BCMN075
DIE 3-0X0-6X1-10 POLISHED 2, BAL. SAWN

BASE 4-0X1-2X0-6 POLISHED TOP,
POLISHED BEVEL FRONT

BCMN011
DIE 3-6X0-8X2-2 ALL POLISHED W/CHAMFERS

BASE 4-6X1-2X0-8 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

BCMN005
DIE 3-0X0-8X2-2 ALL POLISHED W/CHAMFERS

BASE 4-0X1-2X0-8 POLISHED TOP,
POLISHED BEVEL FRONT, BRP

BCMN015
DIE 3-6X0-8X2-2 ALL POLISHED W/CHAMFERS

BASE 4-6X1-2X0-8 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

VASE 0-6X0-10 ALL POLISHED, TURNED

SECTION B - PAGE 8

BCMN083 BCMN CUSTOM DESIGNS
DIE 3-0X0-6X2-4 POLISHED 2, BRP
BCMN086
BASE 4-0X1-0X 0-6 DIE 3-6X0-6X2-2 ALL POLISHED
POLISHED TOP, BRP BASE 4-6X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP

BCMN087
DIE 2-6X0-6X3-10
POLISHED 2, BRP
BASE 3-6X1-0X0-6
POLISHED TOP, BRP

BCMN084
DIE 3-0X0-6X1-10 POLISHED 2, BRP
BASE 4-0X1-0X0-6 POLISHED TOP, BRP

BCMN085
DIE 2-6X0-6X3-0
ALL POLISHED W/STEELED

RECESS AREAS
BASE 3-0X1-0X0-6
POLISHED BEVEL FRONT

BCMN088
DIE 3-6X0-6X2-2 ALL POLISHED
BASE 4-6X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN

SECTION B - PAGE 9

BCMN099 BCMN CUSTOM DESIGNS
2 WINGS 2-0X0-6X3-0 ALL POLISHED W/RECESS CHECKS,
BCMN098
PLYNTH 2-0X0-10X0-6 ALL POLISHED DIE 3-6X0-8X4-0
VASE 0-9X0-9 ALL POLISHED, ROUND ALL SAWN, W/.5”

BASE 7-0X1-2X0-6 POLISHED TOP SETBACKS
POLISHED 0-2 MARGIN, BRP BASE 4-0X1-2X0-8

SAWN TOP,
SAWN 0-2 MARGIN, BRP

BCMN096
DIE 3-6X0-6X2-0 ALL POLISHED
BASE 4-0X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP

BCMN095 BCMN100
DIE 3-6X0-6X2-2 ALL POLISHED DIE 3-0X0-6X1-10 ALL POLISHED W/CHAMFERS
BASE 4-6X1-0X0-6 POLISHED TOP,
BASE 4-0X1-0X0-6 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP POLISHED 0-2 MARGIN, BRP

BCMN097
DIE 4-0X0-8X5-0 ALL POLISHED
BASE 6-0X1-2X0-8 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP
VASE 1-0X0-10X1-0
ALL SAWN,

CORED W/WEEP HOLES
CIRCLE PLATFORM,
1-2X1-2X0-6
ALL SAWN

SECTION B - PAGE 10

BCMN CUSTOM DESIGNS

BCMN091
DIE 3-6X0-6X2-2 ALL POLISHED

BASE 4-6X1-0X0-6
POLISHED TOP,

POLISHED 0-2 MARGIN, BRP

BCMN006
DIE 3-6X0-6X2-2 ALL POLISHED WITH CHAMFERS

BASE 4-6X1-0X 0-6 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

BCMN007
DIE 2-0X0-6X3-0 ALL POLISHED
BASE 3-0X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP

BCMN014
DIE 3-6X0-8X2-4 ALL POLISHED BOOK TOP

BASE 4-6X1-2X0-8 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

BCMN002
DIE 2-0X0-6X2-0
ALL POLISHED WITH CHAMFERS
BASE 3-0X1-0X0-6
POLISHED TOP,
POLISHED 0-2 MARGIN,

BRP

BCMN016
DIE 3-6X0-6X2-2 ALL POLISHED
BASE 4-6X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP

SECTION B - PAGE 11

HARMON BCMN CUSTOM DESIGNS

BCMN089 BCMN090
DIE 3-6X0-6X2-0 POLISHED 2, BRP DIE 3-6X0-6X2-2 ALL POLISHED
BASE 4-6X1-0X0-6 POLISHED TOP, BASE 4-6X1-0X0-6 POLISHED TOP,

POLISHED 0-2 MARGIN, BRP POLISHED 0-2 MARGIN, BRP

BCMN092 Boston
DIE 4-0X0-8X2-4 ALL POLISHED
BASE 5-0X1-2X0-8 POLISHED TOP, BCMN093
DIE 3-2X0-8X3-0
POLISHED 0-2 MARGIN, BRP ALL POLISHED CONTOUR W/
STEELED RECESS
BASE 4-2X1-2X0-8

POLISHED TOP,
POLISHED 0-2
MARGIN, BRP

BCMN094
DIE 3-6X0-6X2-2 ALL POLISHED W/CHAMFERS

BASE 4-6X1-0X0-6 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

BCMN220
DIE 3-0X0-6X1-10 ALL POLISHED W/CHAMFERS

BASE 4-0X1-0X0-6 POLISHED TOP,
POLISHED 0-2 MARGIN, BRP

SECTION B - PAGE 12

BCMN CUSTOM SLANTS

BCMN076
SLANT 3-0X0-10X1-4 POLISHED FACE,

SAWN BACK, BRP

BCMN077
SLANT 2-6X0-10X1-4 ALL POLISHED
BASE 3-6X1-4X0-6 POLISHED TOP, POLISHED BEVEL, BRP

BCMN078
SLANT 2-0X0-10X1-4 ALL POLISHED,

INTEGRATED VASE DESIGN

BCMN079 Our Beloved
HEART SLANT 2-0X0-10X1-4 POLISHED FACE, Daughter, Sister
and Friend
SAWN BACK, BRP
BASE 2-8X1-2X0-6 POLISHED TOP, BRP TIFFANY MORGAN

DEC. 12, 1976 - MAR. 27, 2006

SECTION 1B4-CPAGE 13

BCMN CUSTOM SLANTS

SEE OUR WEBSITE FOR ADDITIONAL OPTIONS

BCMN250
SLANT 2-0X0-10X1-6 POLISHED FACE,

SAWN BACK, BRP

BCMN251
SLANT 2-0X0-10X1-4 ALL POLISHED
BASE 3-0X1-2X0-6 POLISHED TOP, BRP

BCMN252
SLANT 2-0X0-10X1-4 POLISHED FACE & TOP, SAWN BACK, BRP

BASE 2-4X1-2X0-6 POLISHED TOP, BRP

BCMN253
SLANT 2-0X0-10X1-6 ALL POLISHED
BASE 2-4X1-2X0-6 POLISHED TOP, BRP

SECTION B - PAGE 14

BCMN CUSTOM SLANTS

SEE OUR WEBSITE FOR ADDITIONAL OPTIONS

BCMN254
SLANT 2-0X0-10X1-4 ALL POLISHED

BCMN255
SLANT 1-8X0-10X1-6 ALL POLISHED
BASE 2-2X1-4X0-6 POLISHED TOP, BRP

BCMN256
SLANT 2-0X0-10X1-6 POLISHED FACE, SAWN BACK, BRP

BASE 3-0X1-4X0-6 POLISHED TOP, BRP

BCMN257
SLANT 2-0X0-10X1-6 ALL POLISHED
BASE 2-4X1-2X0-6 POLISHED TOP, BRP

SECTION B - PAGE 15

BCMN ANGEL DESIGNS

BCMN080
DIE 3-0X0-8X3-0 ALL POLISHED W/CARVED ANGEL
BASE 4-0X1-4X0-8 POLISHED TOP & BEVEL FRONT, BRP

SPECIFY FLAT OR CARVED BACK

BCMN081
DIE 5-0X0-8X3-0 POLISHED 2, 2 CARVED ANGELS
BASE 6-0X1-4X0-8 POLISHED TOP & BEVEL FRONT, BRP

SPECIFY FLAT OR CARVED BACK

BCMN082
DIE 4-6X0-8X3-0 ALL POLISHED, SINGLE CARVED ANGEL
BASE 6-0X1-4X0-8 POLISHED TOP & BEVEL FRONT, BRP

SPECIFY FLAT OR CARVED BACK

BCMN124
DIE 2-0X0-8X3-0 ALL POLISHED W/SCULPTED ANGEL
BASE 3-0X1-4X0-8 POLISHED TOP W/POLISHED BEVEL FRONT, BRP

SECTION B - PAGE 16

BCMN ANGEL DESIGNS

BCMN247
DIE 4-0X0-10X3-0 ALL POLISHED W/CARVED ANGEL
BASE 5-0X1-4X0-8 POLISHED TOP & 0-2 MARGIN, BRP

Samson

BCMN249
DIE 3-4X0-8X5-0 ALL POLISHED CARVED ANGEL

PLYNTH 3-10X1-0X0-6 ALL POLISHED
BASE 4-4X1-4X0-8 POLISHED TOP & BEVEL FRONT, BRP

PRINCETON

DOCKER BCMN246
DIE 2-8X0-8X2-6 ALL POLISHED, SINGLE CARVED ANGEL
BASE 3-4X1-4X0-8 POLISHED TOP & 0-2” MARGIN, BRP

BCMN248
DIE 2-6X0-8X3-0 ALL POLISHED W/SCULPTED ANGEL
BASE 3-4X1-4X0-6 POLISHED TOP W/POLISHED BEVEL FRONT, BRP

SECTION B - PAGE 17

CROSS MEMORIALS

SECTION 1BC-9PAGE 18

CROSS MEMORIALS

SECTION B - PAGE 19

GREEK MEMORIALS

SECTION B - PAGE 20

GREEK MEMORIALS

SECTION B - PAGE 21

GREEK MEMORIALS

BCMN225 BCMN228
BCMN226 BCMN243

BCMN227 BCMN230

SECTION B - PAGE 22

JEWISH MEMORIALS

SECTION B - PAGE 23

JEWISH MEMORIALS

SECTION B - PAGE 24

BENCHES

BCBN002 BCBN013
SEAT 4-0X1-2X0-4 ALL POLISHED CURVED SEAT W/CHAMFERS 4-0X1-6X0-4 ALL POLISHED
SUPPORT 3-6X0-8X1-2 ALL POLISHED
SUPPORTS 1-2X0-4X1-2 ALL POLISHED

BCBN005 BCBN015
SEAT 4-0X1-2X0-4 ALL POLISHED SEAT 4-0X1-6X0-4 ALL POLISHED
SUPPORTS 1-0X0-4X1-2 ALL POLISHED SUPPORTS 1-0X1-0X1-6 ALL POLISHED

BCBN009 BCBN011
SEAT 2-8X1-2X0-4 ALL POLISHED SEAT 4-0X1-2X0-4 ALL POLISHED
SUPPORT 3-6X0-8X2-0 ALL POLISHED SUPPORTS 1-2X0-4X1-2 ALL POLISHED

BCBN016 BCBN014
SEAT 3-10X1-4X0-4 ALL POLISHED SEAT 3-4X1-2X0-4 ALL POLISHED
SUPPORT 1-2X1-2X1-10 ALL POLISHED SUPPORTS 1-2X0-10X1-10 ALL POLISHED
SMALL SUPPORT 1-2X0-4X1-2 ALL POLISHED
BASE 5-6X2-0X0-6 POLISHED TOP, BRP.

SECTION C - PAGE 1

BENCHES

CLARKSON JENNIFER HAMMOND

1945 - 2013

RICHARD

1942 - 2013

SECTION C - PAGE 2

BENCHES

BCBN018
SEAT 3-6X1-8X0-4 ALL POLISHED
SUPPORTS 1-4X0-4X1-0 ALL POLISHED
BACK 3-6X0-4X1-4 ALL POLISHED
ARMS 1-0X0-4X0-6 ALL POLISHED

BCBN017
SEAT 4-0X1-4X0-2 ALL POLISHED
SUPPORTS 1-6X0-2X2-6 ALL POLISHED
BACK 4-0X0-2X2-6 ALL POLISHED

SECTION C - PAGE 3

BENCHES

BCBN022
SEAT 3-0X1-4X0-4 ALL POLISHED
SUPPORTS 1-4X0-8X2-2 ALL POLISHED

BCBN021
SEAT 2-10X1-4X0-4 ALL POLISHED
SUPPORTS 1-4X0-8X2-2 ALL POLISHED

BCBN023
SEAT 3-0X1-4X0-4 ALL POLISHED
SUPPORTS 2-6X0-8X2-2 ALL POLISHED

SECTION C - PAGE 4

CREMATION MEMORIALS

CREMATION PILLARS

BCCMT 1 001 002 003
PILLAR 1-2X1-2X2-0 ALL POLISHED

PILLAR SHOWN WITH
#007 BOOK TOP

004 005 006

TOP OPTIONS SHOWN ABOVE

BCCMT 2
PILLAR 1-0X1-0X4-0 ALL POLISHED
BASE 1-5X1-5X0-8 POLISHED TOP, BRP TAPERED SIDES

BRONZE TOP PLATE COVER

BCCMT 3
PILLAR 1-0X1-0X2-0 ALL POLISHED
BASE 1-5X1-5X0-8 POLISHED TOP, BRP TAPERED SIDES

BRONZE TOP PLATE COVER

CREMATION BEVELS BCCMT 5
SINGLE 0-10X0-8X1-6 ALL SAWN
BCCMT 4 BRONZE TOP PLATE COVER AVAILABLE
DOUBLE 1-6X0-8X1-6 ALL SAWN
BRONZE TOP PLATE COVER AVAILABLE

SECTION C - PAGE 5

CREMATION MEMORIALS

CREMATION BENCHES

6 BCCMT 6-8
7 SEAT 3-0X1-1X0-4 ALL POLISHED
2 SUPPORTS 1-0X0-6X1-0 ALL POLISHED
2 NICHE FRONTS 1-9X0-7X1-0 ALL POLISHED
BASE 3-0X1-1X0-4 ALL POLISHED

BYRD

8 BCCMT 9
SEAT 3-6X1-6X0-4 ALL POLISHED
BACK 3-6X0-4X1-2 ALL POLISHED
SUPPORT 2-10X0-8X1-2 ALL POLISHED

BCBN024 CRBCBN
SEAT 4-0X1-4X0-6 ALL POLISHED OVERALL SIZE:
SUPPORTS 1-2X1-2X2-0 ALL POLISHED 3-0X2-2X4-0 ALL SAWN
CAPS 1-4X1-4X0-4 PEAK TOP ALL POLISHED
BASE 6-2X1-6X0-4 POLISHED TOP, BRP

BCBN026
SEAT 3-0X1-4X0-4 ALL POLISHED
SUPPORTS 1-2X1-0X2-0 ALL POLISHED
BASE 5-6X1-4X0-4 POLISHED TOP, BRP

BCBN025
SEAT 2-10X1-4X0-4 ALL POLISHED
SUPPORTS 1-2X1-0X2-0 ALL POLISHED
BASE 5-4X1-4X0-4 POLISHED TOP, BRP

CREMATION BOULDERS

SECTION C - PAGE 6

CREMATION MEMORIALS

BCMN240
PLYNTH 0-4X0-8X0-5 ALL POLISHED
2 WINGS 1-3X0-6X1-8 ALL POLISHED, SAWN CHECKS
2 URNS 0-10X0-10X1-2 ALL POLISHED, W/CORE HOLES
BASE 4-8X1-4X0-8 POLISHED TOP & BEVEL FRONT, BRP
STRASSACKER BRONZE #60160 CROSS 0-1X2-1

BCMN239
DIE TOP 3-6X0-8X1-5 ALL POLISHED
2 WINGS 0-11X0-8X0-6 ALL POLISHED
2 URNS 0-10X0-10X1-2 ALL POLISHED W/CORE HOLES

BASE 4-4X1-4X0-8 POLISHED TOP
& 0-2 POLISHED MARGIN, BRP

BCMN237
DIE 3-10X0-8X2-0 ALL POLISHED,
0.75” SETBACK ON TOP FRONT ONLY
2 URNS 0-10X0-10X1-2 ALL SAWN W/CORE HOLES
BASE 5-0X1-2X0-8 POLISHED TOP
W/0-2 POLISHED MARGIN, BRP

BCMN238
DIE TOP 3-6X0-8X2-0 ALL POLISHED
2 URNS 0-10X0-10X1-2 ALL SAWN W/CORE HOLES

BASE 5-0X1-4X0-8 POLISHED TOP
& 0-2” POLISHED MARGIN, BRP

SECTION C - PAGE 7