TM
Boost Pro 12/24v IQV20 Series PROTAC HL® SERIES
Lithium Jump Starter Impactools™ High Lumen Professional Tactical Lights
C4 LED Technology; bulb that is shockproof &
Weighing in at under 5 lbs, the Boost Pro is easy to manage, easy • Max Torque: 365 ft-lbs rev. torque & 550 ft-lbs nut-busting torque
to store, and offers best in class power and will easily charge most • Durability: Higher-power, Brushless motor offers longer life and high power, has a 50,000 hr lifetime.
coupled with an all metal drive train & hammer mechanism as well as a reinforced Powered by (3) 3v CR123 batteries (included)
electronic devices through USB ports when you are on the go. housing to give this tool a significant edge over the competion!
• The IQv Power Control System includes 4 modes: Full Power, Mid Power, 600 LUMEN FLASHLIGHT
FUNCTIONS : Wrench Tight, and Hand Tight. From brake calipers to valve covers and everything
in between, there’s no need to switch tools! Unique, NO-SHADOW Light provides Light Output (Lumens): 600 (High) / 33 (Low)
• Jumpstarting of Trucks, Cars, Equipment, Boats, ATV, Etc. MAXIMUM visibility so you can get the job done right! Runtime: 1hr 15min (High) / 18hr (Low)
• Charging of electronic devices phones, tablets, etc. Beam Distance: 835 ft (High) / 188 ft (Low)
Length x Weight: 5.4” x 5.6 oz
FEATURES:
#STR-88040
• 12V and 24V jump-starter, back up charger for all brands of
cellphones, tablets, and other portable electronics Powerful, MSRP $135.00
30,000mAh high capacity Nano Lithium batteries
• Fast Charging with low Self-Discharge cycle SPECIAL
• Cranking Amps: 12V-600A, 24V-300A
• Peak Amps: 12V – 1200A, 24V – 600A $94.99
• Includes built-in safety features for battery protection.
• LCD Screen for battery status and user feedback. HL3 - 1,100 LUMEN FLASHLIGHT
• Ultra-Bright LED Light (Operates as both a work and emergency
light) Light Output (Lumens): 1,100 (high) / 35 (low)
Beam Distance: 1,250 ft / 228 ft
#CAL-570 Part # Description MSRP SPECIAL Runtime: 1.5 hrs / 36 hrs
$405.00 $309.99
MSRP $399.99 #W5132 3/8” BARE TOOL $665.00 $499.99 #STR-88047
#W5132-K12 5.0Ah, 1-Battery Kit
SPECIAL MSRP $155.00
$229.99 SPECIAL
#W5132-K22 2.5 & 5.0Ah, 2-Battery Kit $745.00 $559.99 $109.99
#W5152 1/2” BARE TOOL $405.00 $299.99 540 LUMEN HEADLAMP
42% OFF #W5152-K12 5.0Ah, 1-Battery Kit $665.00 $499.99 Features: Ten-Tap™ programmable switch,
C4® LED, 90° tilting head, anodized aluminum
#W5152-K22 2.5 & 5.0Ah, 2-Battery Kit $745.00 $559.99 body, elastic head straps, rubber hard-hat strap,
water and 3ft impact resistant (batteries included)
Beam Distance: 568 ft
Modes (Runtimes): High (1.75hrs), Medium
(8hrs), & Low (36hrs)
#STR-61304
MSRP $100.98
SPECIAL
$69.99
INFRARED THERMOMETER M12 FUEL™ 1/4” HEX IMPACT DRIVER AMP HOUND 2
Continuous Backlit Display Attach adapter to fuse or just touch the
Temperature Range:
& 3/8” IMPACT WRENCH KIT probes to the top of the fuse. Tone lets
-22° to 932°F, -30° to 500°C you know when you are touching a fuse.
Accuracy:
w/ FREE 12v 4.0Ah XC BATTERY Works on new fuse types Mini-LP and
+ 1% of reading Micro-Fuse, along with three of the most
Resolution: 0.1 degree
Spot Ratio: 12:1 A $132.00 VALUE! common automotive fuses types: Mini,
Power: 2x AA batteries Standard and Maxi with all of the most
#ESI-EST45 #2453-20 12v 1/4” HEX IMPACT DRIVER Kit Includes: common ranges. No chance of shorting a
circuit while the fuse is removed. Real
MSRP $37.95 • Max Torque: 100 ft-lbs (2) 3.0Ah Batteries,
• Impacts: 3,550 ipm Charger & Tool-Bag. time readings of current and amps in
SPECIAL • No-Load Speed: 0-2,650 rpm fused circuit without removing fuse.
$29.99 #CAL-72
#2454-20 12v 3/8” IMPACT WRENCH MSRP $162.28
• Max Torque: 117 ft-lbs SPECIAL
• Impacts: 3,500 ipm
$99.99
• No-Load Speed: 0-2,650 rpm
#MIL-2595-22 51% OFF
Total Value $757.00
SPECIAL
$369.99 Backed by the Industries BEST Warranty
5yrs Tool / 3-2yrs Battery
Like us on Facebook for exclusive
offers and promotions!
www.facebook.com/snydertool
M18 FUEL™ AUTOMOTIVE KITS
TM
POLISHER KIT
• Free Speed: 0-2,200 rpm
• Variable speed dial & trigger allows for
fine tuning between 0-800 / 2,200 rpm
• Polish an entire vehicle on 1 charge!
• Includes: (2) 5.0Ah XC Batteries, Charger, D-Handle, Side Handle, Cutting Polshing & Finishing
Pads, Screen Cover.
3PC AUTOMOTIVE COMBINATION KIT
2754-20 - 3/8” 40%-47% OFF
• Max Torque: 210 ft-lbs
• Impacts: 0-3,200 ipm
• No Load Speed: 2.500 rpm
2763-20 - 1/2”
• Max Torque: 700 ft-lbs & 1,100 ft-lbs nut busting torque
• Impacts: 0-450 / 2,300 Ipm
• No Load Speed: 0-425 / 1,700 rpm
• Includes: (2) REDLITHIUM™ XC 5.0Ah Batteries, Charger,
LED Work Light & Kit Bag
HIGH TORQUE IMPACT WRENCH KIT
• Max Torque: 700 ft-lbs & 1,100 ft-lbs nut busting torque
• Includes: (2) REDLITHIUM™ XC 4.0Ah Batteries, Charger & Kit Box
Part # Description Total
SPECIAL
#2738-22P
#2896-23 Value
#2763-22
7” Variable Speed Polisher Kit $878.00 $529.99
3pc Automotive Combo Kit $1,311.00 $699.99 FREE 2 pack 5.0Ah Battery #48-11-1852! A $330.00 VALUE!*
XC 4.0Ah Impact Wrench, 2-Battery Kit $977.00 $574.99 FREE 5.0Ah Battery #48-11-1850! A $222.00 VALUE!*
QUICK-LOCK QUIET
DIE GRINDERS
#210QL COMPACT PNEUMATIC TOOLS
• 360° Swivel Throttle
• Free Speed: 18,000 rpm
• Only 80 dB!
#205QL #216QL MINI BUTTERFLY IMPACT WRENCHES ULTRA COMPACT IMPACT WRENCH
• Free Speed: 20,000 rpm • Free Speed: 20,000 rpm #7711 (1/4”) #7732C (1/2”)
• Only 78 dB! • Only 81 dB! #7721 (3/8”)
MAX Torque: 460 ft-lbs
MSRP SPECIAL MAX Torque: 80 ft-lbs only 2.1 lbs!
Free Speed: 15,000rpm
Less than 1/2 lbs & 6” Long!
Part # Description
#205QL 1/4” 90° Angle Die Grinder $100.70 $64.99 COMPACT AIR RATCHETS COMPACT ANGLE WRENCHES
#210QL $100.70 $84.99
#216QL 1/4” Swivel Throttle 90° Angle $100.70 $72.99 #7829 (3/8”) #7727 (3/8”)
Die Grinder #7829H (1/2”) #7737 (1/2”)
1/4” 3/4HP Die Grinder MAX Torque: 70 ft-lbs MAX Torque: 220 ft-lbs
Only 2.46 lbs & Less than 10” Long!
ULTRA-COMPACT Impactools™
• One-handed forward/reverse push button and three
Mode power regulator provide max control
• Only 4.6” long and 2.4 lbs!
#15QMAX (3/8”) Part # Description MSRP SPECIAL
$259.00 $179.99
+ QUIET Technology #7732C 1/2” Ultra Compact Impact Wrench $269.00 $189.99
+ MAX Torque: 380 ft-lbs #7711 1/4” Mini Butterfly Impact Wrench
#35MAX (1/2”)
+ MAX Torque: 450 ft-lbs
#7721 3/8” Mini Butterfly Impact Wrench $269.00 $189.99
#7727 3/8” Compact Angle Impact Wrench $350.00 $249.99
Part # Description MSRP SPECIAL #7737 1/2” Compact Angle Impact Wrench $350.00 $249.99
#15QMAX 3/8” QUIET Impact Wrench $245.00 $189.99 #7829 3/8” Compact Air Ratchet $259.00 $179.99
#35MAX 1/2” Impact Wrench $245.00 $189.99 #7829H 1/2” Compact Air Ratchet $259.00 $179.99
NASCAR® is a registered trademark of the National Association for Stock Car Auto Racing, Inc.
3-In-1 Car Dollies
TM • Dolly vehicles by the wheel, pinch weld or frame
• 2,000lb capacity per dolly
EXCLUSIVE PROMOTIONS! • Fully stackable, eliminating need for racks
• Sold in sets of 2
39PC 1/2” Dr. MASTER SAE Impact Socket Set
#OME-47020
w/ FREE 14PC 12-Point SAE Socket Set
MSRP $435.43
#SUN-2668
SPECIAL
• Sizes: 3/8” to 1-1/2”
Total Value $456.98 $299.99
SPECIAL Waterproof Flex Light Extendable Magnetic
$229.99 w/ Magnet Base & Hook Flashlights
49% OFF A $96.99 VALUE! This light Ideal for Hands-Free Use. • Telescopes from 6.5” to 21”, w/ a flexible
• Sizes: 7/16” to 1-1/4” The can be bent, folded, and wrapped/ shaft .
39PC 1/2” Dr. MASTER METRIC Impact Socket Set hooked around objects; or it can be • Powerful magnets on both ends.
placed on a flat surface and used as a • EMF-2 has improved rear magnet for
w/ FREE 13PC 12-Point Metric Socket Set freestanding light. horizontal placement and flexible 360°
Max Light Output: 60 Lumens inspection mirror.
#SUN-2669 + (21) LEDs w/ (3) Light Settings * Available in 12pc Counter Display.
Made of water proof silicone
• Sizes: 3/8” to 1-1/2” Powered by 3xAAA Batteries #SPI-EMF1
Total Value $357.98
#AST-21FX SPECIAL
SPECIAL
SPECIAL $15.99
$199.99
44% OFF $19.99 #SPI-EMF2
SPECIAL
A $71.99 VALUE! $19.99
• Sizes: 10mm to 24mm
80PC 3/8” Dr. MASTER Impact Socket Set
w/ FREE 13PC 12-Point Standard Socket Set
• (8) SAE & (12) Metric Standard & Deep: 5/16” to 3/4” & 8-19mm
• (7) SAE & (10) Metric Universal Sockets: 3/8” to 3/4” & 10-19mm
• (9) Torx & (9) External-Torx Sockets: T20 to T55
• (5) Extensions: 3” [2], 5”, 10”, & 15”
• (1) Universal Joint
#SUN-3580 46% OFF Rechargeable COB LED Hydraulic In-Line Flaring Tool
Total Value $499.98 Slim Light • Combines features of hydraulic and in-
line flaring tools to give an incredibly
SPECIAL • Unique dial power switch is infinitely easy-to-use tool that saves time and
adjustable from 0-410 Lumen output! money!
$269.99 • 20lb magnet at base allows for easy • Does single, double and bubble flares
placement on any magnetic surfaces. w/ option to expand into quick connect
A $51.99 VALUE! • 40 Chip array allows for 850% more fittings.
• Sizes: 7mm to 19mm luminosity. • SAE Sizes:
• Includes: wall adapter and USB cable + 3/16”, 1/4”, 5/16” 3/8”
20PC 1/2" Dr. HEX BIT Impact Set for charging. • Metric Sizes:
• Dimensions: 14.8” (L) x 3” (W) and only + 4.75mm, 6mm, 8mm
w/ FREE 13PC SAE Standard Impact Socket Set 1/2 lbs!
• 10 SAE: 1/4”, 9/32”, 5/16”, 3/8”, 7/16”, 1/2”, #CAL-166
9/16”, 5/8”, 11/16” & 3/4” #AST-40SL
• 10 METRIC: 6mm, 7mm, 8mm, 10mm, MSRP $221.52
12mm, 14mm, 15mm, SPECIAL
17mm, 18mm & 19mm SPECIAL
$69.99
$149.99
#SUN-2637 A $70.99 VALUE!
• Sizes: 7/16” to 1-1/4”
Total Value $264.98
SPECIAL
$139.99 47% OFF
AIR TOOL COMBINATION 1500lb Capacity Car Dollies
PACKS! #SUN-SX6PK • Opens up to 24" and accomodates 12.8" tires
#SUN-SX2PK • (2) Straight Die Grinders • Unique ratcheting mechanism is maintenance free and lighter in weight than other dollies
• (2) Angle Die Grinders • 1500 lb capacity each, capable of moving virtually any passenger car, truck, or SUV
• Straight & Angle Die Grinder • (2) Cut-off Tools
MSRP $169.99 MSRP $410.99 • Outboard locking casters keep user safe and vehicle secure
• Integrated carrying handle for convenient portability
SPECIAL SPECIAL
#SUN-7708 45% OFF
$59.99 $149.99
MSRP $269.00
SPECIAL
$149.99
64% OFF!! Dolly Rack
• Holds up to 4 Dollies!
#SUN-7709
$69.99
CORDLESS TOOLS - IMPACTS
POWER TOOLS INCLUDES
8848 Tool
(2) 4.0Ah Batteries
Fast Charger
Blow Molded Case
20v 1/2” Drive Impact Wrench TM
20v 1/2” Drive Impactool™ • Max Torque: 775 ft-lbs reverse torque
• Durability: An all aluminium backing and clutch housing along with a rubber
• Max Torque: 780 ft-lbs rev. torque & 1,100 ft-lbs nut-busting torque padded battery and tough, composite outer shell provide
• Durability: Higher-power, neodymium motor offers longer life and high power, superior protection from drops and wear-and-tear around
coupled with an all metal drive train & hammer mechanism as well as a reinforced the shop.
housing to give this tool a significant edge over the competion!
#CPT-8848K
MSRP $657.00
SPECIAL
$409.99
Backed by the Industries BEST Warranty
5yrs Tool / 3yrs Battery / 1yr Swap
Part # Description MSRP SPECIAL 60v MAX FLEXVOLT™ 4.5” Grinder
#W7150 BARE TOOL $512.00 $379.99 w/ FREE 20v 1/2” Drive Brushless Impact Wrench
#W7150-K1 3.0Ah, 1-Battery Kit $650.00 $489.99 • Max Speed: 9,000 rpm
• 13 amp motor has equivalent
#W7150-K2 3.0Ah, 2-Battery Kit $785.00 $599.99 Power of Corded.
Freedom of Cordless.™ power output as corded units
#W7150-K12 5.0Ah, 1-Battery Kit $717.00 $544.99 • Includes: (2) 6.0Ah Flexvolt™
Batteries, Charger, Side Handle,
#W7150-K22 5.0Ah, 2-Battery Kit $875.00 $664.99
Wheel, Wheel Guard,
20v 1/2” Drive High Torque Wrenches, Flanges & Bag.
Brushless Impact Wrenches #DWA-DCG414T2
Brushless Motors offer up to 57% more runtime, Total Value $1,091.40
and also have longer lifespans and need less
servicing than standard brushed motors. SPECIAL
• Max Torque: 700 ft-lbs $499.99
• Impacts: 0-2,400 ipm
• No Load Speed: 0-400 / 1,200 / 1,900 rpm A $435.72 VALUE! 54% OFF
• Includes: 5.0Ah XR Batteries,
Charger, Built-In LED & Bag. • Torque: 700 ft-lbs
• Impacts: 0-2,400 ipm
• No Load Speed: 0-400 / 1,200 / 1,900 rpm
20v 3/8” Mid-Torque Impactool™ 20v Right-Angle Impactools™
• Max Torque: 180 ft-lbs • Max Torque: 180 ft-lbs
• Impacts: 2,900 ipm • Impacts: 3,000 ipm
• Max Free Speed: 1,700 rpm • Max Free Speed: 1,900 rpm
FREE #DCL050M1X w/ #DCF899P1 A $322.94 VALUE!
• DCL050 20v Worklight
**#DCF899HP2 Comes w/ DCL050X ONLY** • DCB204 20v 4.0Ah Battery
Part # Description Total SPECIAL
Value
#DCF899P1 5.0Ah, 1-Battery Kit $964.35 $454.99 Buy ANY KIT & Get a FREE Battery #BL2012X! A $141.83 VALUE!
#DCF899HP2 Detent Pin $942.29 $539.99
5.0Ah, 2-Battery Kit
Hog Ring
43%-53% OFF Part # Description Total
Value SPECIAL
#W5130 3/8” Mid-Torque Impactool™ BARE TOOL $503.83 $269.99
#W5130-K12 3/8” Mid-Torque Impactool™ 2.5Ah, 1-Battery Kit $640.83 $374.99
#W5130-K22 3/8” Mid-Torque Impactool™ 2.5Ah, 2-Battery Kit $770.83 $469.99
#W5330 3/8” Right-Angle Impactool™ BARE TOOL $629.83 $369.99
#W5330-K12 3/8” Right-Angle Impactool™ 2.5Ah, 1-Battery Kit $784.26 $484.99
#W5330-K22 3/8” Right-Angle Impactool™ 2.5Ah, 2-Battery Kit $914.48 $584.99
#W5350 1/2” Right-Angle Impactool™ BARE TOOL $651.83 $389.99
#W5350-K12 1/2” Right-Angle Impactool™ 2.5Ah, 1-Battery Kit $805.96 $494.99
#W5350-K22 1/2” Right-Angle Impactool™ 2.5Ah, 2-Battery Kit $936.19 $599.99
MAX Torque: 85 ft-lbs CORDLESS TOOLS - IMPACTS POWER TOOLS
TM Free Speed: 2,000 rpm
12v 1/4” Compact 20v 3/8” Compact
Includes: (2) 1.5Ah Batteries,
Impact Driver Kit Impact Wrench Kit
Charger, & Blow-Molded Case.
MAX Torque: 150 ft-lbs
Impacts: 3,100 ipm
Free Speed: 2,400 rpm
Includes:
(2) 4.0Ah Batteries
Charger
Blow-Molded Case.
#CPT-8818K #CPT-8828K
MSRP $354.00 MSRP $456.00
SPECIAL SPECIAL
$224.99 $289.99
Backed by the Industries BEST Warranty Backed by the Industries BEST Warranty
5yrs Tool / 3yrs Battery / 1yr Swap 5yrs Tool / 3yrs Battery / 1yr Swap
20v 3/8” Compact 20v 1/2” High Torque Impact Kit 20v 1/2” Compact Impact Wrench
Impact Wrench Kit
w/ FREE 4.5” Cutoff Tool w/ FREE 3/8” Compact Impact Wrench
w/ FREE 1/4” & 3/8” Socket Set
A $218.70 VALUE! A $237.08 VALUE!
A $67.37 VALUE! • Torque: 130 ft-lbs
• MAX Speed: 8,000 rpm • Impacts: 0-2,700 ipm
• Max Torque: 130 ft-lbs • No Load Speed: 0-2,300 rpm
• Impacts: 0-2,700 ipm • Max Torque: 400 ft-lbs • 2-position side handle
• No Load Speed: 0-2,300 rpm • Impacts: 0-2,300 ipm • Quick-Change™ Wheel • Max Torque: 152 ft-lbs
• Includes: (2) 4.0Ah XR Batteries, Charger, Built-In • No Load Speed: 0-1,500 rpm Release • Impacts: 0-2,700 ipm
LED & Kit Box. • No Load Speed: 0-2,300 rpm
• Includes: (2) 4.0Ah XR Batteries, Charger, & Kit Bag. • Includes: (2) 4.0Ah MAX Batteries,
#DWA-DCF883M2
#DWA-DCF889M2 Charger, Built-In LED & Kit Box.
Total Value $573.38
Total Value $858.92 #DWA-DCF880HM2
SPECIAL
SPECIAL Total Value $740.24
$329.99
$419.99 SPECIAL
$329.99
42% OFF 52% OFF 55% OFF
49% OFF
12v 3/8” Impact Wrench Kit 12v Impactools™ 48% OFF
#DWA-DCF813S2 • Max Torque: 100 ft-lbs
• Impacts: 3,300 ipm
• Max Torque: 96 ft-lbs • No-Load Speed: 0-2,700 rpm
• Impacts: 0-3,400 ipm • Includes:
• No Load Speed: 0-2,450 rpm
• Includes: (2) 2.0Ah Batteries, Charger, (2) 2.0Ah Batteries,Charger
(3) Built-In LEDs, Tool-Bag.
Built-In LED & Kit Bag.
Total Value $331.28 FREE 12v Flashlight
#DCL510X!
SPECIAL A $68.60 VALUE!
YOUR CHOICE
FREE Screwdriver #D1410! A $136.80 VALUE!
$169.99
Part # Description Total SPECIAL
12v 1/4” Impact Driver Kit Value
#DWA-DCF815S2 #W1110-K2 1/4” Hex Screwdriver $442.53 $229.99
#W1120-K2 1/4” Square Screwdriver $442.53 $229.99
• Max Torque: 79 ft-lbs #W1130-K2 3/8 Square Screwdriver $442.53 $229.99
• Impacts: 0-3,400 ipm
• No Load Speed: 0-2,450 rpm
• Includes: (2) 2.0Ah Batteries, Charger,
Built-In LED & Kit Bag.
CORDLESS TOOLS - DRILLS & DRIVERS
POWER TOOLS12v 1/4” Screwdriver Kit 51% OFF 12v 2.0Ah 2-Battery Driver Kits
• Hex chuck accepts up to 1” tips. • Features: 2-speeds w/ 15-position clutch, built in LED, 3-point rubber TM
• (15) Clutch Settings pads, & patent-pending soft-mount system.
• Free Speed: 0-1,050 rpm • Max Torque: 205 in-lbs
• Includes: • Free Speed: 0-400 / 1,600 rpm
(2) 2.0Ah Batteries Part # Description MSRP SPECIAL
Charger
Built-In LED #D1130-K2 3/8” Drill / Driver Kit $280.50 $214.99
Kit Bag
#D1410-K2 1/4” Hex Screwdriver Kit $265.50 $199.99
3/8” DRILL / DRIVER 1/4” HEX SCREWDRIVER
+ Optimized to work on + Magnetic pin-detent bit holder
metal & synthetic surfaces + Recessed quick-change drive
12v 3/8”
Drill / Driver Kit
• (15) Clutch Settings
• 2-Speed Transmission:
+ 0-400 / 1,500 rpm.
• Includes:
(2) 2.0Ah Batteries 49% OFF 12v 3/8” 20v 1/2”
Charger
Built-In LED
Kit Bag Drill / Driver Kit Hammer Drill Kit
3/8” Spindle Lock & Keyless Chuck 1/2” Spindle Lock & Keyless Chuck
• Max Torque: 24 ft/lbs • Max Torque: 60 ft/lbs
• Free Speed: 0-350 / 1,500 rpm
• Includes: (2) 1.5Ah Batteries, • Free Speed: 0-450 / 1,600 rpm
• Includes: (2) 4.0Ah Batteries,
Charger & Blow-Molded Case.
Charger, &Blow-Molded Case.
FREE 12v Flashlight #DCL510X! A $68.80 VALUE! #CPT-8528K Backed by the Industries BEST Warranty #CPT-8548K
5yrs Tool / 3yrs Battery / 1yr Swap
MSRP 342.00 MSRP 506.00
SPECIAL SPECIAL
Total SPECIAL $219.99 $319.99
Value
Part # Description $255.89 $124.99
$331.48 $169.99
#DCF610S2 1/4” Screwdriver Kit
#DCD710S2 3/8” Drill / Driver Kit
20v 1/2” 18v 1/2” Compact 20v 1/2” Premium
Drill / Driver Drill / Driver Kit Drill / Driver Kit
• Features: 2-Speed Transmission, • Max Power: 410 UWO • Max Power: 535 UWO
16-Position Clutch, Electric Brake, & Adjustable Handle. • 2-Speed Transmission: • 3-Speed Transmission:
• Variable Speed Switch allows for “soft-start” + 0-575 / 1,350 / 2,000 rpm
• Max Stall Torque: 700 in-lbs + 0-500 / 1,700 rpm • ½” Ratcheting Clutch w/ (22) settings
• 2-Speed Transmission: • ½” Ratcheting Clutch w/ (17) settings • Includes: (2) 4.0Ah Batteries,
• Includes: (2) Batteries, Charger & Kit Box.
+ 0-500 / 1,900 rpm Charger & Kit Box.
• Includes: #BL2010 3.0Ah Li-Ion Battery, Charger, Blow-Molded #DWA-DC720KA
Case. #DWA-DCD980M2
MSRP $338.92
MSRP $498.40
SPECIAL
SPECIAL
$224.99
$324.99
Part # Description MSRP SPECIAL
$252.00 $214.99
#D5140 BARE TOOL $414.75 $314.99
#D5140-K1 3.0Ah, 1-Battery Kit $508.90 $389.99
#D5140-K2 3.0Ah, 2-Battery Kit
CORDLESS TOOLS - MISC. & ACCESSORIES
12v Sander / Polisher 12v Drill / Impact Driver Kit POWER TOOLS
• Features: 2-Speed Gearbox, Quick-Change Spindle Lock, Variable w/ FREE 3/8” Impact Tool
Speed Switch, Trigger-Lock, & Side-Handle.
TM • No-Load Speed: 0-2,200 / 7,600 rpm • Includes:
• Includes: + DCD710 - 3/8” Drill/Driver
#ING-G1621-K2 • Max Power: 189 UWO
(2) #BL1203 Batteries
MSRP $334.99 Charger • 2-Speed Transmission:
2” & 3” Sanding Backing Pads
SPECIAL 3” Hook-And-Loop Backing Pad + 0-400 / 1,500 rpm
(3) Polishing Pads + DCF815 - 1/4” Impact Driver
$249.99
• Max Torque: 79 ft-lbs A $90.68 VALUE!
• Impacts: 0-3,400 ipm
• No Load Speed: 0-2,450 rpm • Torque: 96 ft-lbs
• (2) 2.0Ah Batteries, Charger, • Impacts: 0-3,400 ipm
• No Load Speed: 0-2,450 rpm
Built-In LED & Bag
12v Ratchet Wrench Kits 20v Ratchet Wrench Kits #DWA-DCK211S2
• Features: built in LED light, slim-line battery, • Features: VS paddle-style trigger, & in-line Total Value $466.94
and VS paddle-style trigger. battery, provides same reach as air ratchets.
• Max Torque: 30 ft-lbs • Max Torque: 54 ft-lbs SPECIAL
• Free Speed: 0-260 rpm • Free Speed: 0-225 rpm
• Includes: 2.0Ah Battery, Charger & Tool Bag. • Includes: (2) 2.5Ah Batteries, Charger & Blow- $259.99
Molded Case.
45% OFF
BATTERIES
Part # Description MSRP SPECIAL
$294.40 $224.99
#R1120-K1 1/4” 12v Ratchet 2.0Ah, 1-Battery Kit $294.40 $224.99
#R1130-K1 3/8” 12v Ratchet 2.0Ah, 1-Battery Kit $629.00 $479.99
#R3130-K22 3/8” 20v Ratchet 2.5Ah, 2-Battery Kit $646.00 $489.99
#R3150-K22 1/2” 20v Ratchet 2.5Ah, 2-Battery Kit
8v Gyroscopic Screwdriver Kit Description MSRP SPECIAL
$84.00 $69.99
Part # 2.0Ah 12v Battery
w/ FREE 8v Compact Flashlight
#BL1203
#BL2012 2.5Ah 20v Battery $141.83 $114.99
• Motion Activation variable speed & reversing A $40.76 VALUE! #BL2010 3.0Ah 20v Battery $228.00 $189.99
control for precise fastening control • Lumens: 80
• 5hr Runtime
• Adjustable, 2-position handle 45% OFF #BL2022 5.0Ah 20v Battery $248.00 $199.99
• Battery State of Charge on Tool
• Quick Bit Change, holds 1" bit tips. #BC1121 Universal Battery Charger $130.00 $109.99
• No Load Speed: 0-430 rpm
• Drive: 1/4" Hex
• Includes: (2) Batteries, Charger & Kit Bag. BATTERIES
#DWA-DCF680N2
Total Value $222.73
SPECIAL $119.99
Dual Jobsite Charger Pack 18v to 20v Power Converter Part # Description MSRP SPECIAL
$148.66 $114.99
• Charges (2) DEWALT® 12V - 20V batteries. • Compatible with MOST 18v DeWalt Tools. #DC9096 18v Battery $122.10 $99.99
• Includes (2) USB ports. • Allows for use of most 20v Batteries in 18v #DC9310 18v Charger $142.46 $109.99
• Packaged w/ a #DCB204 (4.0Ah battery). Tools. #DCB201 1.5Ah 20v Battery $153.94 $129.99
#DCB203 2.0Ah 20v Battery $205.84 $169.99
#DWA-DCB102BP #DWA-DCA1820 #DCB204 4.0Ah 20v Battery $122.38 $99.99
#DCB101 20v Charger
MSRP $269.99 MSRP $71.63
SPECIAL SPECIAL
$199.99 $54.99
AIR TOOLS - IMPACTS
POWER TOOLS TITANIUM Series 1/2” Impactools™
• Features: Titanium hammercase, steel-wear plate, & composite housing, all at
only 4.6 lbs, making it the lightest 1/2” impact in its class!
• Max Torque: 930 ft-lbs rev. torque & 1,350 ft-lbs nut-busting torque.
• Free Speed: 8,500 rpm 40-45% OFF TM
• Impacts: 1,220 ipm
• Patented QUIET Technology
reduces operating Part # Description MSRP SPECIAL
noise down to 86dBA!
#2235TiMAX TITANIUM Impactool™* $605.00 $364.99
• 7/16", 1/2", 9/16", 5/8", 11/16", #2235QTiMAX TITANIUM Impactool™ QUIET $526.00 $389.99
3/4", 13/16", 7/8", 15/16", 1",
1-1/16", 1-1/8", 1-1/4" #2235TiMAX-2 TITANIUM Impactool™ 2” Anvil* $706.00 $384.99
FREE 13pc SAE Deep Impact Socket Set #2235QTiMAX-2 TITANIUM Impactool™ QUIET 2” Anvil* $716.00 $399.99
#SK4H13L! A $90.00 VALUE!*
1/2” Heavy-Duty 231 SERIES - Super-Duty 1/2” Impact Wrenches
Impact Wrenches 1/2” Impactool Well-Balanced Tool w/ Twin-Hammer Clutch.
™ • Max Torque: 670 ft-lbs
• Max Torque: 922 ft-lbs (1,200 ft-lbs Take-off) The 231 series has set the standard for
• Free Speed: 8,200 rpm • Free Speed: 10,020 rpm
• Impacts: 1,200 ipm • 17mm, 19mm & 21mm impact performance for over three decades.
• Max Torque: 590 ft-lbs #CPT-7736
• Free Speed: 8,000 rpm
#ING-231C MSRP $255.00
FREE #INGSK4C3F! SPECIAL
A $36.00 VALUE!
40% OFF $179.99
Total Value $282.00
SPECIAL
37% OFF $164.99 • 3” Extension 2” Extended Anvil
#ING-231H #CPT-7736-2
• 3/4” x 13/16”
MSRP $246.00 • 19mm x 21mm MSRP $259.00
FREE 3pc Metric Wheel Protector Socket Set #SS413WP! A $28.12 VALUE!* SPECIAL SPECIAL
$169.99 $199.99
#ING-231H-2 (2” Anvil)
Part # Description MSRP SPECIAL
$350.12 $219.99 MSRP $289.00
#7748 Composite $360.12 $229.99
#7748-2 Composite 2” Anvil SPECIAL
$199.99
#7748-2TL Torque Limited 2” Anvil $349.00 $239.99 Classic 1/2”
Impact Wrench
TORQUE LIMITED DESIGN 1/2” Impact Wrenches
Engineered for high-volume tire • Max Torque: 450 ft/lbs
changing applications.
#AST-1812
Torque Limited in Forward: 60/70 ft-lbs #CPT-734H • Free Speed: 7,500 rpm
*prevents excess torque from
being applied to the fasteners. • Max Torque: 425 ft-lbs MSRP $170.18
• Free Speed: 6,400 rpm SPECIAL
MSRP $293.00 $99.99
SPECIAL SNUB NOSE
QUIET 1/2” Impactools™
$179.99 #AST-1822
Built on the hardworking and respected
foundation laid by the 2135QTiMAX! • Free Speed: 10,000 rpm
• Patented QUIET Technology reduces operating noise down to
“Classic Tools” have a 2yr Warranty MSRP $147.24
90dBA! when you register @ www.cp.com SPECIAL
• Max Torque: 780 ft-lbs &1,100 ft-lbs nut-busting torque THUNDERGUN $119.99
• Free Speed: 11,000 rpm
• Impacts: 1,250 ipm 1/2” Impactool™ Pit Crew 1/2” Composite
Power, Speed, Impact Wrench
w/ FREE 13pc SOCKET SET & Durability!
• 7/16", 1/2", 9/16", 5/8", 11/16", w/ Side-to-Side Technology
3/4", 13/16", 7/8", 15/16", 1",
1-1/16", 1-1/8", 1-1/4"
FREE Protective Boot #2135MBoot! A $21.00 VALUE A $55.00 VALUE! #CPT-7749
Part # Description MSRP SPECIAL #ING-232TGSL • NOW WITH MORE TORQUE!
• Max Torque: 955 ft-lbs
#2135QXPA Composite $409.00 $239.99 • Max Torque: 625 ft-lbs • Free Speed: 9,000 rpm
• Free Speed: 10,000 rpm
#2135QXPA-2 Composite 2” Anvil $420.00 $279.99 MSRP $430.00
Total Value $482.00
SPECIAL
SPECIAL
$299.99
$299.99 38% OFF
AIR TOOLS - IMPACTS
3/8” Composite 1/2” Impact Wrench POWER TOOLS
Impact Wrench
1/2" Impactools™ w/ Side-to-Side Technology #CPT-749
TM #236 • Max Torque: 625 ft-lbs
• Free Speed: 6,400 rpm
• Torque: 450 ft-lbs
• Free Speed: 9,500 rpm MSRP $371.83
SPECIAL
#2130 / 2130-2 #244 #CPT-7729 $254.99
• Torque: 550 ft-lbs • Torque: 500 ft-lbs • Max Torque: 415 ft-lbs 3/8" Compact
• Free Speed: 9,000 rpm • Free Speed: 7,000 rpm • Free Speed: 9,400 rpm Impact Wrench
Part # Description MSRP SPECIAL MSRP $367.00
#236 SPECIAL
#244
#2130 Impactool™ $180.00 $129.99 $249.99 #CPT-724H
#2130-2
Heavy-Duty Impactool™ $409.00 $289.99 “SNUB-NOSE” • Max Torque: 200 ft-lbs
• Free Speed: 8,500 rpm
Impactool™ $309.00 $219.99 Impact Wrenches
MSRP $314.00
Impactool™ 2” Anvil $319.00 $219.99 • Free Speed: 9,000 rpm
SPECIAL
#CPT-7731 (3/8”)
$219.99
• Max Torque: 415 ft-lbs
3/8” TITANIUM Impactools™ 3/8" Impactool™
#CPT-7732 (1/2”)
w/ FREE Protective Boot • Max Torque: 150 ft-lbs
• Max Torque: 450 ft-lbs • Free Speed: 10,200 rpm
#2115MBoot! A $21.00 VALUE! MSRP $245.14 #ING-212
• Max Torque: 300 ft.-lbs SPECIAL MSRP $267.00
• Free Speed: 15,000 rpm YOUR CHOICE
SPECIAL
#ING-2115TIMAX #ING-2115QTIMAX $164.99
$199.99
Total Value $389.00 (Quiet) Total Value $398.00
SPECIAL SPECIAL 39% OFF
$239.99 $249.99
3/4" Composite 3/4" Impact Wrench Classic 3/4” 3/8" Impact Wrenches
Impact Wrench w/ FREE 1/2” Impact Wrench Impact Wrench • Max Torque: 75 ft-lbs
w/ Side-to-Side Technology A $255.00 VALUE! #AST-135BT
(Snub Nose)
Twin-Hammer Clutch. w/ FREE 8pc Socket Set
#AST-136E
• Max Torque: 670 ft-lbs (“Butterfly”)
• Free Speed: 10,020 rpm SPECIAL
YOUR CHOICE
A $110.46 VALUE!
• 1",1-1/16",1-1/8",1-1/4", 1-5/16", 1-3/8",
1-7/16",1-1/2"
#CPT-7769 #CPT-772H $74.99
• Max Torque: 1,440 ft-lbs • Max Torque: 1,200 ft-lbs • Max Torque: 1,000 ft.-lbs
• Free Speed: 7,000 rpm • Free Speed: 6,300 rpm
• Free Speed: 4,200 rpm
MSRP $913.00 #CPT-7763 48% OFF Total Value $836.26 3/8" Butterfly Wrench
SPECIAL Total Value $1,023.00
40% OFF SPECIAL • Max Torque: 90 ft-lbs
• Free Speed: 9,500 rpm
$629.99 SPECIAL $529.99 $499.99
3/4" H.D. Impactool™ 3/4"Impactool™ 3/4” Impactool™ #CPT-7722
• Max Torque: 1,250 ft-lbs • Max Torque: 1,200ft-lbs • Improved Weight Distribution MSRP $262.65
• Free Speed: 6,000 rpm • Free Speed: 5,500rpm • Max Torque: 1,050 ft-lbs
• Free Speed: 6,000 rpm SPECIAL
#ING-2161XP #ING-261
#ING-259 $179.99
MSRP $1,262.00 MSRP $798.00
MSRP $595.00 3/8" In-Line Impactool™
SPECIAL SPECIAL
SPECIAL works great in cramped spaces!
$849.99 $499.99 • Max Torque: 200 ft-lbs.
$439.99 • Free Speed: 8,500 rpm
ULTIMATE Impactools™ 35% OFF #ING-216
w/QUIET Technology MSRP $320.00
SPECIAL
• Max Torque: 1,350 ft-lbs
• Free Speed: 7,000 rpm $219.99
16% more efficient air motor.
1/4" Impact Wrench
Part # Description MSRP SPECIAL
• Max Torque: 34 ft-lbs
#2145QiMAX 3/4” Drive* $1,048.00 $679.99 FREE 8pc Deep Impact SAE Set #SK6H8L • Free Speed: 7,000 rpm
#2155QiMAX 1” Drive $945.00 $729.99
A $140.00 VALUE! #CPT-719
• 3/4",1-1/16",1-1/8",1-1/4", 1-5/16", 1-3/8",1-7/16",1-1/2"
MSRP $351.23
SPECIAL
$239.99
AIR TOOLS - IMPACTS & ACCESSORIES
POWER TOOLS1" H.D. 1” Pistol-Grip RIGHT ANGLE
Impactool™ Impact Wrench Impactools™ TM
• Max Torque: 1,770 ft-lbs • Max Torque: 1770 ft-lbs Low Profile Impactool offers more than twice the
• Free Speed: 5,000 rpm • Free Speed: 5000 rpm power of the leading competitor’s ratchet!
• Rotatable 4-Position Handle
#ING-295 • 3 Power Settings + Length (13”), Head Height (2”), Weight 3.4lbs.
• Max Torque: 180 ft-lb
FREE #INGSK8C5T • Free Speed: 7,000 rpm
A $136.00 VALUE!
Total Value $1,192.00 #CPT-7776 A $44.00 VALUE! A $56.00 VALUE!
SPECIAL MSRP $1,133.00 • 9mm, 10mm, 11mm, 12mm, 13mm, • 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,
14mm, 15mm, 16mm, 17mm, 19mm 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm
$739.99 SPECIAL
Part # Description MSRP SPECIAL
38% OFF $784.99 #2015MAX 3/8” Impactool™ $509.00 $329.99
• 13/16" square,
33mm & 1-1/2" deep hex,
1-1/8" & 1-1/4" deep thin wall hex
1” Impact Wrenches #2025MAX 1/2” Impactool™ $531.00 $339.99
w/ 6” Extended Anvils Air & Electric Impact Wrench 86pc MULTI-DRIVE
#ING-285B-6 Anvil Snap Rings MASTER DEEP & STANDARD
• Max Torque: 1,770 ft-lbs w/ Fast-Torque™ 1,000 ft-lbs in 2 sec. 1/4” , 3/8” & 1/2” include (3) Clips & (3) O-Rings. IMPACT SOCKET SET
3/4” & 1” include (1) Clips & (1) O-Rings.
The Swept-Back Handle provides great maneuverability. 1/2" Dr SAE Shallow & Deep Sets,
• Free Speed: 5,000 rpm #JCL-JC250 (1/4”) -13pc each 7/16" - 1-1/4"
• 28lbs
$2.49 1/2" Dr Metric Shallow & Deep Sets,
FREE #INGSK8C5T #JCL-JC380 (3/8”) -14pc each 10-19, 21, 22, 26, & 27mm
A $136.00 VALUE!
$4.99 3/8" Dr SAE Shallow & Deep Sets,
• 13/16" square, #JCL-JC500 (1/2”) -8pc each 5/16" - 3/4"
33mm & 1-1/2" deep hex,
1-1/8" & 1-1/4" deep thin wall hex 3/8" Dr Metric Shallow & Metric Sets,
-8pc each 9, 10, 11, & 13-19mm
#ING-2190Ti-6 (TITANIUM Series)
$4.99 #ING-SK34C86
Revolutionary Chainsaw-Grip Handle #JCL-JC750 (3/4”)
provides comfort & control. MSRP $381.00
• Max Torque: 1,650 ft-lbs $4.99 SPECIAL
• Free Speed: 6,800 rpm
• Only 15.5lbs! • 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8", #JCL-JC1000 (1”) $319.99
1-3/16”, 1-1/4”, 1-1/2”
FREE 8pc Deep Impact $5.99
SAE Socket Set #SK8H8L!
A $172.50 VALUE!
#CPT-7780-6 Snap Ring Tool Kit
#JCL-JCP135
• Max Torque: 1550 ft-lbs
• Free Speed: 5000 rpm $44.99
Only 17lbs!
#CPT-7782-6 “Classic Tools” have a 2yr Warranty 40pc 3/8” SAE & MM Shallow & 43pc 1/2” Master
when you register @ www.cp.com Deep Impact Socket Set
• Max Torque: 1920 ft-lbs Impact Socket Sets
• Free Speed: 5200 rpm Includes;
25lbs - SAE: 5/16”, 3/8”, 7/16”, 1/2 ”, Both Sets come w/ Shallow & Deep
Sockets, Universal Joint, and
FREE Tire Bufffer #873 9/16”, 5/8”, 11/16”, & 3/4” Four Extensions (3”, 5”, 10”, & 15”)
! A $148.00 VALUE! - METRIC: 8mm to 19mm
#SUN-2568 (SAE)
#CPT-797-6 (Classic) #SKT-4090
• Sizes: 3/8” to 1-1/2”
• Max Torque: 1400 ft-lbs MSRP $352.10 MSRP $419.99
• Free Speed: 4200 rpm
29.75lbs SPECIAL SPECIAL
#CPT-7782SP-6 (#5 SPLINE) $249.99 $269.99
• Max Torque: : 2150 ft-lbs #SUN-2569 (MM)
• Free Speed: 5200 rpm
25lbs • Sizes: 9-30mm
MSRP $322.99
FREE SPLINE SOCKETS!
#8940167740 (13/16”) & SPECIAL
#8940167742 (33mm)
A $151.49 VALUE! $209.99
Part # Description Total We offer a full line of SK Hand Tool individual We offer a full line of Sunex Individual
Value SPECIAL sockets, socket sets, and a variety of other sockets and socket sets
#285B-6 1” Impactool™ $1,073.00 $614.99 hand tools. Please visit www.skhandtool.com
#2190Ti-6 1” TITANIUM Impactool™ $1,541.50 $929.99 visit www.sunextools.com to take a look at
#7780-6 1” Lightweight Impact Wrench $1,155.66 $749.99 to take a look at their online catalog! their online catalog!
#7782-6 1” High-Torque Impact Wrench $1,178.00 $699.99
1” Classic Impact Wrench $1,560.00 $1,079.99 SK Hand Tool, LLC offers a limited lifetime Sunex Tools offers a limited lifetime warranty
#797-6 $1,315.39 $749.99 warranty on all sockets and sets. on all sockets and sets
#7782SP-6 #5 SPLINE Drive
Please visit www.skhandtool.com for more Please visit www.sunextools.com for more
information. infmoration.
AIR TOOLS - RATCHETS & DRILLS
#824 / 824T #825 / 825T POWER TOOLS
• Torque: 12.5 ft-lbs • Torque: 15 ft-lbs
• Free Speed: 220 rpm • Free Speed: 200 rpm
#1105MAX-D2 / 1105MAX-D3
TM MAX Power, MAX Control, & MAX Comfort
#105-D2 / 105-D3 • Torque: 30 ft-lbs #828 / 828H (Classic) #886 / 886H
• Free Speed: 300 rpm
• Torque: 25 ft-lbs • Torque: 50 ft-lbs • Torque: 50 ft-lbs
• Free Speed: 250 rpm #107XP / 1077XP • Free Speed: 150 rpm • Free Speed: 270 rpm
• Torque: 54 ft-lbs
• Free Speed: 160 rpm “Classic Tools” have a 2yr Warranty
when you register @ www.cp.com
#9426 / 9427
109XP / 1099XP #1207MAX-D3 / 1207MAX-D4 • Torque: 27 ft-lbs
• Free Speed: 270 rpm
• Fastest Ratchet in its Class! Slip resistant friction disc for longer life & durability. • Only 1 lb! & 5” Long!
• Torque: 70 ft-lbs • Torque: 65 ft-lbs
• Free Speed: 300 rpm Part # Description MSRP SPECIAL
• Free Speed: 200 rpm
#824 1/4” Ratchet $145.00 $99.99
Part # Description MSRP SPECIAL #824T 3/8” Ratchet $149.00 $99.99
#825 1/4” Heavy Duty Ratchet $235.00 $159.99
#105-D2 1/4” MINI Ratchet $170.00 $129.99 #825T 3/8” Heavy Duty Ratchet $239.00 $159.99
#105-D3 3/8” MINI Ratchet $180.00 $134.99 #828 $206.00 $149.99
#1105MAX-D2 1/4” MAX MINI Ratchet $230.00 $174.99 #828H 3/8” Classic Ratchet $209.00 $149.99
#1105MAX-D3 3/8” MAX MINI Ratchet $235.00 $179.99 #886 1/2” Classic Ratchet $132.00 $94.99
#107XP 3/8” Heavy Duty Ratchet $160.00 $119.99 #886H 3/8” Standard Ratchet $141.00 $94.99
#1077XP 1/2” Heavy Duty Ratchet $195.00 $149.99 #9426 1/2” Standard Ratchet $215.00 $149.99
#109XP 3/8” Super Duty Ratchet $230.00 $189.99 #9427 1/4” Stubby Ratchet $215.00 $149.99
#1099XP 1/2” Super Duty Ratchet $255.50 $219.99 3/8” Stubby Ratchet
#1207MAX-D3 3/8” Ultra Duty Ratchet $250.00 $189.99 #7802 / #7802RA / #7802RAKC
#1207MAX-D4 1/2” Ultra Duty Ratchet $260.00 $199.99
• 0.5 hp motor
• Free Speed: 2,000 rpm
#7300 / 7300R #7803A / #7803RA / 7803RAKC
• Free Speed: 2,800 rpm • Free Speed: 500 rpm
#879 #789R-26 (Classic) #7807R
• Free Speed: 1,800 rpm • Free Speed: 2,600 rpm • reversible motor
• Free Speed: 1,800 rpm
#887 #789HR (Classic)
• Free Speed: 2,700 rpm • Free Speed: 500 rpm
#9285 “Classic Tools” have a 2yr Warranty #9286
• Powerful 0.5 hp motor when you register @ www.cp.com
• Free Speed: 2,900 rpm
• Powerful 0.5 hp motor Part # Description MSRP SPECIAL
#9790
• Free Speed: 600 rpm
• Reversible 0.37 hp motor
• Free Speed: 4,200 #9789 #7802 3/8” Heavy Duty Drill $184.00 $139.99
• Reversible 0.37 hp motor #7802RA 3/8” Reversible Drill Geared Chuck $224.00 $169.99
• Free Speed: 800 rpm
#7802RAKC 3/8” Reversible Drill Keyless Chuck $235.00 $179.99
#7803A 1/2” Heavy Duty Drill $286.00 $219.99
Part # Description MSRP SPECIAL #7803RA 1/2” Reversible Drill Geared Chuck $326.00 $249.99
$208.06 $139.99 $337.00 $259.99
#7300 1/4” Mini Drill 245.43 $169.99 #7803RAKC 1/2” Reversible Drill Keyless Chuck $163.00 $124.99
#7300R 1/4” Mini Reversible Drill
#7807R 3/8” Angled Reversible Drill
#879 3/8” Standard Angled Drill $194.67 $134.99 Mini Ratcheting Wrenches Reversible Air Drill
#887 3/8” Standard In-Line Drill $186.00 $129.99
#9285 3/8” Heavy Duty Pistol Grip Drill $185.00 $129.99 WILL NOT stop and rip from your hand #AST-525C (3/8”)
#9790 3/8” H.D. Pistol Grip Reversible Drill $212.00 $144.99 50 ft-lbs working torque.
#789R-26 3/8” Classic Reversible Drill $345.00 $239.99 700rpm 0.5 hp Motor w/ 1,800rpms
#789HR 1/2” Classic Reversible Drill $473.00 $329.99 MSRP $88.50
#9286 1/2” Heavy Duty Pistol Grip Drill $301.00 $209.99 #AST-1124 (1/4”)
#9789 1/2” H.D. Pistol Grip Reversible Drill $321.00 $219.99 SPECIAL
#AST-1128 (3/8”)
$69.99
MSRP $163.99 #AST-527C (1/2”)
YOUR CHOICE 0.5 hp Motor w/ 500rpms
MSRP $168.60
$119.99
SPECIAL
$129.99
POWER TOOLSAIR TOOLS - GRINDERS & ACCESSORIES
#860
• Free Speed: 24,000 rpm
“Classic Tools” have a 2yr Warranty #301B TM
when you register @ www.cp.com #9105QB • Free Speed: 21,000 rpm
#301B-2MK
#872 • Free Speed: 28,000 rpm
• 1/4” & 6mm collets • (8) 2” Pads & Holder
• Free Speed: 22,000 rpm
#9106QB #301B-3MK
#875
• Free Speed: 22,000 rpm • (8) 3” Pads & Holder
• Free Speed: 22,500 rpm
• 1/4” & 6mm collets #301B-K #301B-32MK
#876 • 10 mounted grinding kits • (4) 2” Pads
• (4) 3” Pads
• Free Speed: 30,000 rpm #302B
• 1/4” & 6mm collets • Holder
• Free Speed: 18,000 rpm
#9104Q #409
#9107
• Free Speed: 60,000 rpm • Free Speed: 27,000 rpm
• Free Speed: 17,000 rpm
#5102MAX
#307B
• Free Speed: 20,000 rpm
• Free Speed: 28,000 rpm
#5108MAX
#9108QB
• Free Speed: 25,000 rpm
• Free Speed: 22,000 rpm
#308B
• Free Speed: 25,000 rpm
#9110QB
• Free Speed: 25,000 rpm
#9104QKIT #9111QB Part # Description MSRP SPECIAL
$100.00 $79.99
• (5) mounted points • Free Speed: 25,000 rpm #301B 90° Angle Die Grinder $119.00 $94.99
• (5) mounted burrs #301B-K 301B Kit w/ Grinding Tips $165.00 $124.99
• 2.4mm & 3mm collets #301B-2MK 301B 2” Surface Prep Kit
• Blow Molded Case
#9112QB #301B-3MK 301B 3” Surface Prep Kit $162.00 $124.99
#301B-32MK 301B 2” & 3” Surface Prep Kit $174.00 $134.99
• Free Speed: 22,000 rpm $163.00 $114.99
#302B H.D 90° Angle Die Grinder
#9113G #307B Straight Die Grinder $87.00 $64.99
#308B $99.99
• Free Speed: 25,000 rpm H.D Composite Straight Die Grinder $134.00
Part # Description MSRP SPECIAL #409 Aluminum Straight Die Grinder $158.00 $119.99
#5102MAX MAX 90° Angle Die Grinder $250.00 $189.99
#5108MAX MAX Straight Die Grinder $225.00 $169.99
#860 Classic H.D. Die Grinder $224.00 $155.99 8pc Double-Cut Standard DOUBLE-CUT CARBIDE BURR SETS
#872 Standard Duty Die Grinder $118.18 $79.99
#875 Mini 90° Angled Die Grinder $108.15 $74.99 Includes: (4) cylindrical, (2) tree, & Each Set has 1/4” Shanks &
#876 Mini Straight Die Grinder $113.00 $79.99 (2) ball are packaged in a Blow Molded Case,
#9104Q $190.55 $129.99
#9104QKIT 1/8” Pencil Die Grinder $280.16 $189.99 for easy storage and transport.
#9105QB Pencil Die Grinder Kit $147.00 $99.99
#9106QB Straight Die Grinder $168.00 $119.99 #AST-2181 8pc Rapid Rotary
#9107 90° High Perf. Angled Die Grinder $147.00 $99.99
#9108QB Pistol Grip Die Grinder $168.00 $119.99 MSRP $98.25 Includes: (3) cylindrical, (4) tree, &
#9110QB 120° High Perf. Angled Die Grinder $169.00 $119.99 (1) ball
#9111QB 10” Extended Die Grinder $221.00 $154.99 SPECIAL
#9112QB H.D. Quiet Die Grinder $375.00 $259.99
#9113G 13” Extended Die Grinder $300.00 $299.99 $79.99 #AST-2188
Industrial Grade Die Grinder
MSRP $152.60
SPECIAL
5pc Double -Cut Extra Long Shank $99.99
4.5" OAL
Includes: (2) cylindrical,
(2) tree, & (1) ball.
#AST-2185
MSRP $98.25
SPECIAL
$74.99
AIR TOOLS - GRINDERS & ACCESSORIES POWER TOOLS
4” Angle Grinder
TM • Free Speed: 12,000 rpm
#201 #222 (#202 & #204) 360° Directional Exhaust.
• Free Speed: 25,000 rpm • Free Speed: 22,000 & 20,000 rpm
• Swivel Muffler
#AST-3006
#202
MSRP $210.05
• Free Speed: 22,000 rpm
SPECIAL
$159.99
#1221
• #1205: Straight Grinder w/ 25,000 rpm Professional Angle Grinders 2” Mini Angle Grinder & Kit
• #1240: 90° Grinder w/ 20,000 rpm
• #2181: 8pc Burr Set Both Grinders Feature: spiral bevel Compact (5.5”long) & Lightweight (1.2
gears, ergonomic side handle, adjustable lbs) w/variable speed throttle delivering
up to 20,000rpm.
protective guard, & aluminum housing. Equip w/ a Cushioned Grip Handle, Self
-Locking Throttle, Side Exhaust , CP
.8hp Motor Exclusive Cut-Off Tool Adaptor, & a full
180° Protective Guard.
• Free Speed: 12,000 rpm
#204 #2181B #CPT-9121BR #CPT-9122BR #CPT-7500D
• Free Speed: 20,000 rpm • #202: Straight Grinder w/ 22,000 rpm (5” Wheel Capacity) (4-1/2” Wheel Capacity) MSRP $275.00
• #2181: 8pc Burr Set
#217 MSRP $378.42 SPECIAL
• Free Speed: 20,000 rpm SPECIAL YOUR CHOICE $184.99
#218 $259.99
• Free Speed: 56,000 rpm KIT
#T20AH All Items packed in a Blow-Molded Case:
2” 60, 80, & 120 grit Grinding Wheels (3 each).
• Free Speed: 20,000 rpm (5) 2” Cutting Wheels
(1) Pin Wrench
#T210 (1) Spanner Wrench
Protective Glasses
• Free Speed: 23,000 rpm • Powerful .88 hp motor
• Free Speed: 12,000 rpm #CPT-7500DK
MSRP $303.45
SPECIAL
$209.99
MAX Grinders
Part # Description MSRP SPECIAL #ING-3445MAX (4.5")
#ING-345MAX (5")
#201 Composite Straight Die Grinder $52.53 $39.99
#202 SPECIAL
#204 Composite Straight Die Grinder $58.83 $44.99 YOUR CHOICE
#217
#218 $314.99
#222
#1221 90° Composite Angled Die Grinder $90.03 $69.99
#2181B
#T20AH 13” Composite Extended Die Grinder $170.23 $109.99 GRINDING WHEELS
#T210
1/8” Pencil Die Grinder $70.88 $59.99 4” WHEELS 4.5” WHEELS 5” WHEELS
#202 & #204 Die Grinder Kit $143.20 $99.99 • Rated 13,700 rpm • Rated 13,300 rpm • Rated 12,000 rpm
maximum speed. maximum speed. maximum speed.
Straight & Angled Kit w/ Burr Set $159.70 $109.99
*Individual Sizes Available *Individual Sizes Available *Individual Sizes ONLY
#202 w/ Burr Kit Set $132.53 $99.99
#FIR-1423-2186 #FIR-1423-2188 #FIR-1423-2189
90° Angled Die Grinder $80.77 $64.99
(5pc) (5pc) • Grade A24R
Straight Die Grinder $43.02 $34.99 • Grade A36S • Grade A24R • 1/4” x 7/8” Arbor
• 1/8” x 5/8” Arbor • 1/4” x 7/8” Arbor
$4.99
$11.99 $15.99
8PC. CARBIDE BURR SET #FIR-1423-2187
w/ WOODEN BOX (5pc)
• Grade A24R
*Individual Sizes Available* • 1/4” x 5/8” Arbor
#SGS-BK8 $9.99
Includes: (4) cylindrical, (2) tree, & (2) ball
MSRP $187.30
SPECIAL
$149.99
AIR TOOLS - CUTTING TOOLS
POWER TOOLSReversible Air Cut Off Tool Heavy-Duty Cut Off Tool Reciprocating Saws TM
Equipped w/ Speed Regulator Knob. • Free Speed: 18,000 rpm Each Saw Features: Low Vibration Kit
Comes w/ (5) Cut-Off Wheels. 3/8” x 2-7/8” Wheel Size w/ a 360° 3/8” Stroke Length & 10,000 Strokes Per Minute.
• Free Speed: 20,000 rpm rotatable chrome-plated spark guard (15) saw blades (5 each):
Pad Diameter = 3” COMPACT & LIGHTWEIGHT + 18T (#CA146719),
#ING-326 + 24T (#CA146720),
#ING-426 Adjustable Guard Guide. + 32T (#CA146721),
MSRP $95.00 Includes 3 saw blades: 18T (#8940158775),
MSRP $130.00 24T (#8940158775), & 32T (#8940158775). #CPT-7901K
SPECIAL
SPECIAL #CPT-7900 MSRP $360.00
$74.99
$89.99 MSRP $198.00 SPECIAL
High-Speed Cut-Off Tool
Extended Length SPECIAL $249.99
Cutting Tool Features: Adjustable Speed Regulator,
Lock-Off Lever, & Rear Exhaust. $139.99
• Free Speed: 14,000 rpm • Free Speed: 22,000rpm
(11) Position / 126° Adjustable Swivel Wheel Size: 2-7/8” (73mm) LOW VIBRATIONS
Guard
Additional Features: Spindle Lock #CPT-874 Ergonomic design maximizes
System, Safety Throttle Lever, Rear comfort & productivity.
Exhaust, & 360° Swivel Air Inlet. MSRP $113.00 360° swivel air inlet.
(5) Norton 4" cutting discs.
SPECIAL #CPT-7901
#CPT-9116
$79.99 MSRP $268.00
MSRP $364.62
SPECIAL $189.99
Heavy-Duty Heavy-Duty Nibbler
Reciprocating Saws Works on cold rolled steel, plastic, tin,
aluminum, & other metals up to 18 gauge
Includes (6) high-speed steel cutting at a rate of more than 6 ft. per minute.
blades. Holds a tight 1/4" radius.
#ING-429 #ING-325
- 10,000 SPM MSRP $255.00
MSRP $155.00
SPECIAL
SPECIAL $109.99
$194.99
SPECIAL $249.99 #ING-4429 Heavy-Duty Shear
ONYX Cut-Off Tools - Increased comfort, performance, Shears most plastics, aluminium, tin,
& durability w/ 5,750 SPM and steel. Makes clean cuts in cold rolled
3” Standard 3” In-Line 4” In-Line w/ Quick MSRP $195.00 steel up to 20 gauge w/out chips.
4,200 strokes per minute
• Free Speed: 20,000 rpm • Free Speed: 15,000 rpm Change Button SPECIAL
#ING-7802SA
#AST-208 #AST-209 • Free Speed: 14,000 rpm $139.99
MSRP $291.00
MSRP $70.45 MSRP $119.00 #AST-409 Low Vibration Air Saw
SPECIAL
SPECIAL SPECIAL MSRP $121.08 9,500 Strokes per Minute (SPM).
Cuts plastics to fiberglass, composites $199.99
$54.99 $89.99 SPECIAL to aluminum, and sheet metal.
(6) high-speed steel cutting blades. REPLACEMENT SAW BLADES
$99.99
5pc Packages
Arbor for Cut-Off Wheels CUT-OFF WHEELS #ING-529 #CPT-CA146719 (18 tpi)
#CPT-CA146720 (24 tpi)
Turn a Die Grinder or Drill into a Cut-Off 3/8” arbor hole. MSRP $250.00 #CPT-CA146721 (32 tpi)
Tool, using 1/4” or 3/8” Cut-Off Wheels. Rated 25,000 rpm maximum speed.
SPECIAL $19.99
#TOO-94950 1/16” x 3” Cut-Off Wheels
$5.99 #TOO-94860 (5pc) $189.99 6pc Packages
#ING-P4CS-6 (24 tpi)
100pc 3” Diameter Cut-Off $9.99 ONYX Heavy-Duty Saw #ING-P4FS-6 (32 tpi)
Wheel Tray #TOO-94970 (5pc w/ #94950 Arbor)
9,000 Strokes per Minute $14.99
46 Grit, 1/16” thickness. 3/8” arbor hole. $14.99 Includes AST#5SAW - 5pc 24 T.P.I.
100 wheels per box. MADE IN USA. #TOO-94890 Saw Blades 5pc Packages
#AST-5SAW (24 tpi)
#AST-CW3100 (100pc) #AST-930 #AST-5SAWR (32 tpi)
MSRP $126.97 $129.99 MSRP $112.51 $11.99
SPECIAL 1/32” x 3” Cut-Off Wheels SPECIAL 5pc Packages
#TOO-94900 (5pc) #TOO-90000 (3” 18 tpi)
$99.99 $89.99 #TOO-90010 (4” 18 tpi)
$9.99 #TOO-90020 (3” 24 tpi)
#TOO-94980 (5pc w/ #94950 Arbor) #TOO-90030 (3” 32 tpi)
#TOO-90040 (4” 32 tpi)
$14.99 #TOO-90060 (4” 24 tpi)
#TOO-94930
$12.99
(100pc)
$129.99
AIR TOOLS - HAMMERS & STRIKERS
#714 #115 #121K6 #118MAX POWER TOOLS
#122MAX
2,000 BPM Blow mold plastic carrying case w/
the a removable lid, and 6 chisels:
.401” Round Shank
(1) chisel-spot welder breaker
TM #116
(1) claw ripper-edging tool
#CPT-7111K #7110 (1) 3/4" flat blade chisel
#CPT-7150K (1) single blade cutter
#CPT-7110K 3,200 BPM (1) punch chisel
(1) kwik cutter
*Added Quick Change Posi-Lock Retainer #117
#7111 #118MAXK
#122MAXK
3,500 BPM
Contains: quick change
retainer & 5pc Chisel Set.
Blow-Molded Case.
#7150
2,100 BPM
#121
A $33.26 VALUE! Part # Description MSRP SPECIAL
• rivet cutter, twin blade cutter, #115 5,000 BPM Hammer $72.00 $54.99
cold chisel, straight punch, #116 3,500 BPM Hammer $82.00 $64.99
tapered punch, & spot weld splitter #117 2,000 BPM Long Stroke Hammer $103.00 $69.99
#121 3,000 BPM Super-Duty Hammer $170.00 $129.99
Part # Description MSRP SPECIAL #121K6 $185.00 $139.99
#118MAX #121 Kit $217.00 $164.99
#714 Classic Hammer $671.00 $464.99 #118MAXK 2,500 BPM Long Barrel Hammer $242.00 $184.99
#122MAX $217.00 $164.99
#7110 Vibration Reduced Hammer $149.35 $99.99 #122MAXK #118MAX Kit $242.00 $184.99
3,500 BPM Short Barrel Hammer
#7110K #7110 Kit $185.40 $129.99
#122MAX Kit
#7111 Economy Hammer $130.08 $69.99
#7111K #7111 Kit $134.93 $99.99
#7150 Heavy Duty Hammer $148.26 $89.99
#7150K #7150 Kit $151.20 $99.99
Xtra Long Pneumatic Tools Punch / Flange Tools IN-LINE Needle Scaler Needle
Scalers
• Heat Treated Steel, Black Oxide Finish. Performs hole punching & crimping. Ideal for scaling and rust removal.
Crimping & Punch Capacity: 1.6mm (1/16”) 4,200 BPM MINI
HAMMERS
#MAY-32001 (12”) Punch Diameter: 5.5mm (7/32”) #AST-4320 Delivered w/ Set of Needles: 12” x 1/8”
#AST-605PT (Pistol) 4,000 BPM
SPECIAL $29.99 #AST-605ST (Straight) MSRP $169.79
#MAY-32002 (18”) #CPT-7115
MSRP $109.00 SPECIAL
SPECIAL $39.99 MSRP $265.00
#MAY-32003 (24”) SPECIAL $129.99
SPECIAL $184.99
SPECIAL $49.99 $84.99 Needle Scaler
Weld Flux Chipping Hammer
SCRAPERS Punch Diameter: 8mm (5/16”) 4,600 BPM
#MAY-32016 (2”x18”) #AST-608PT (Pistol) 19” x 1/8” steel needles & 1.37” width chisel w/
#AST-608ST (Straight) #ING-125 high resistance to wear.
SPECIAL $34.99 4,800 BPM
#MAY-32017 (2”x24”) MSRP $144.09 MSRP $291.00
#CPT-7120
SPECIAL $39.99 SPECIAL SPECIAL
MSRP $318.00
$99.99 $199.99
SPECIAL $219.99
7pc Pneumatic Fan 5pc Pneumatic AIR HAMMER SPRINGS
Pistol Grip
Clutch Wrench Set Separating Fork Set Quick Change Spring
Delivered w/ 2-Sets of Needles;
• Use w/ Air Hammer • Separates ball-joints & tie-rods quickly Retains Chisels w/ .401” Parker Shanks. +19” x 1/8” & 29” x 5/64”
#LIS-43300 #MAY-31940 #TOO-94000 4,800 BPM
$4.99
MSRP $216.95 MSRP $196.82 #CPT-7125
Retain-It 2pc Safety Device
SPECIAL SPECIAL MSRP $284.55
Collar fits against stop on .401” Parker shank
$169.99 $144.99 chisels for 100% contact. SPECIAL
5pc Pneumatic Pilot Punch Set 5pc Pneumatic Chisel Kit #TOO-94100 $194.99
$14.99
• Used to drive in & remove roll, spring, or split Kit includes: edging tool, tail pipe cutter, REPLACEMENT NEEDLES
pins or other hollow tension pins. straight chisel, cutting chisel, & punch.
• Includes: 1/4”, 5/16”, 3/8”, 7/16”, & 1/2”. All w/ .401" shank diameters to match any of • 19pc Replacement Needle Set
All Sizes Available Separately. your Ingersoll-RandAir Hammers.
#ING-PF2219-22-19
#MAY-32020 #ING-9500 SPECIAL
$14.99
MSRP $87.78 SPECIAL
SPECIAL $24.99
$69.99
POWER TOOLSAIR TOOLS - SANDERS Twin Piston Straight Line Sander TM
Twin Piston Straight Line Sander Belt Size: 2.75” x 17.5” Orbital Palm Sander
Free Speed: 25,000 rpm
3,000 strokes pre minute. 3.67” x 6.75” Pad.
Belt Size: 2.75” x 17.5” #CPT-7268 • Free Speed: 8,000 rpm
#ING-315 MSRP $222.48 #ING-312A
MSRP $189.00 SPECIAL $149.99 MSRP $221.00
SPECIAL $134.99 SPECIAL
High Speed Pistol Sander High Speed Pistol Sander High Speed Sander $149.99
• Free Speed: 14,000 rpm (2) back pads: 3" & 5". • Free Speed: 18,000 rpm
Pad Size: 5” • Free Speed: 18,000 rpm Includes 3” & 4-1/4” Backing Pads.
Spindle Thread: 7/16” x 20.
#ING-317A #AST-222S
#CPT-9778
MSRP $117.00 MSRP $54.08
MSRP $160.00
SPECIAL SPECIAL
SPECIAL
$79.99 $44.99
$114.99
6” Random Orbit Dual Action 8” Sander Dual Action 6” Sander Vacuum-Ready Random
Palm Sanders Dual-action pad motion w/ 5/32” orbit. Built-in silencer muffles noise & a 3/16” Orbital Sander
• Free Speed: 825 rpm orbit for swirl free finishes.
Low noise level and low vibrations! • Free Speed: 12,000 rpm • Free Speed: 12,000 rpm
• Free Speed: 12,000 rpm #ING-328B Pad Size: 6”
Spindle Thread: 5/16” x 24 #ING-311A Orbital Diameter: 3/16”
MSRP $209.00
#CPT-7225 MSRP $102.00 #ING-4151
SPECIAL
(3/32” - Finishing) SPECIAL MSRP $232.00
$144.99
#CPT-7255 $74.99 SPECIAL
6” Dual Action Sander
(3/16” - Surface Prep) $159.99
Rotary & orbital motion.
MSRP $290.00 • Free Speed: 10,000 rpm 6” DAQ Sander MAX Series Vaccum-Ready
Spindle Thread: 5/8” x 11.
SPECIAL YOUR CHOICE Dual-Action-Quiet Performance Random Orbital Sander
#CPT-870 • Free Speed: 9,000 rpm
$199.99 Spindle Thread: 5/16” x 24 • Free Speed: 10,500 rpm
MSRP $111.24 Pad Size: 6”
#AST-300SP Orbital Diameter: 3/16”
SPECIAL
MSRP $82.87 #ING-8202MAX
$74.99
SPECIAL MSRP $298.00
$64.99 SPECIAL
$224.99
Heavy-Duty 7” Sanders Heavy-Duty 7” Sanders Belt Sanders ONYX Air Belt Sanders
Both have a Free Speed of 5,000 rpm Both have a Free Speed of 5,000 rpm Features: Quick change belt replace- (3) Grinding Belts: 40, 60, & 80 grit.
ment, Adjustable sanding arm, & Rubber • Free Speed: 16,000 rpm
VERTICAL VERTICAL Molded Grip w/ handle exhaust & swivel Variable Speed Control
#CPT-7265S #ING-319A air inlet. Simple Belt Tension Lever
More Pulley Space for Thicker Belts
MSRP $462.47 MSRP $357.00 #CPT-9779 (3/8” x 13”)
#AST-3036
SPECIAL SPECIAL • Free Speed: 22,000 rpm
MSRP $324.00 + Belt: 3/8” x 13”
$319.99 $249.99 MSRP $146.82
SPECIAL $219.99
ANGLE ANGLE SPECIAL
#CPT-7269S #ING-313A
$99.99
MSRP $445.99 MSRP $347.00
#CPT-9780 (3/4” x 20” ) #AST-3037
SPECIAL SPECIAL
• Free Speed: 10,000rpms + Belt: 1/2” x 18”
$309.99 $239.99 MSRP $399.00 MSRP $177.55
SPECIAL $275.99 SPECIAL
$119.99
Mini Random Orbital Sander Kit Mini Sander Kit ONYX Micro 2 & 3”
Kit includes: (1) 2" and 3" backing pads, (10) 2" 320, 400 and 600 grit Kit includes: (1) 3" backing pad, (10) 3" 80, 100 and 120 grit sanding Random Orbital Sander
sand paper, and spindle key & Blow Molded Case. discs, (1) 3" fine, medium and coarse surface prep discs, spindle key &
Perfect for spot finishing and touch-up work!
• Free Speed: 15,000 rpm Blow Molded Case. Access to smaller, confined work spaces.
Pad Size: 2” & 3” • Free Speed: 15,000 rpm Ensures a better finish w/ 3mm orbit.
Spindle Thread: 1/4” x 20 Pad Size: 3” Free Speed: 16,000 rpm
Spindle Thread: 1/4” x 20 Spindle: 5/16”-24 (Female)
#CPT-7200S Weighs a meager 1.3 lbs and 4.3” Long!
#CPT-7202D
MSRP $212.18 #AST-321
MSRP $214.24
SPECIAL MSRP $186.45
SPECIAL
$139.99 SPECIAL
$149.99
$129.99
AIR TOOLS - POLISHERS & MISC.
Mini Pistol Disc 7” Polishers / Buffers Heavy-Duty Polishers POWER TOOLS
TM Polisher Kit VERTICAL 7” pad & 8” “flex-edge” polishing pads.
#CPT-7201P • Free Speed: 2,500 rpm • Free Speed: 2,800 rpm VERTICAL
Pad Size: 3”
MSRP $218.36 Spindle Thread: 1/4” x 20 #ING-318A • Free Speed: 2,100 rpm
Kit includes: (1) 3" backing pad, (2) 3
SPECIAL 1/2" foam compounding pads (white/ MSRP $347.00 #CPT-7265P
yellow), spindle key & Blow Molded Case
$144.99 SPECIAL MSRP $477.92
$249.99 SPECIAL
ANGLE $329.99
• Free Speed: 2,500 rpm ANGLE
#ING-314 • Free Speed: 2,100 rpm
MSRP $381.00 #CPT-7269P
SPECIAL MSRP $487.19
$264.99 SPECIAL
$339.99
Polishing Kit w/ Buffer 3” Mini Polishing Kit Caulking Gun UNDERCOAT GUN
Ideal for restoring aluminum & magne- Kit includes: 3” sanding/polishing back-up 8-1/4” long w/ an inside diameter of 2” Compatible w/ all popular brands of
sium rims, engine parts & plastics. pad, 3” wool buffing pad, 3” polishing Air Pressure: 40-90psi. undercoat, and applies in
Restores damaged headlamps. foam pad(yellow), 3” polishing foam pad any viscosity.
Create CUSTOM looks by giving parts (white), in a blow molded case. #AST-405
polished or flat finishes. #AST-UCG100
#AST-3055 MSRP $39.35
#AST-3059 MSRP $35.15
MSRP $131.12 SPECIAL $29.99
MSRP $147.18 SPECIAL
SPECIAL $99.99
SPECIAL $29.99
$99.99 Heavy-Duty MINI TOOLSMini Impact Tool Air Polisher
Tire Buffers Perfect for buffing and
Low Speed Tire Buffer 55 ft-lbs torque polishing paint, metal, and plastic
Makes Patchwork, Roughing Areas for surfaces to a glossy finish.
Most Popular Tire Buffer Recapping, & Cleaning Tire Moldings a #2101KA • Free Speed: 6,400 rpm
on the Market! (10pc Socket Set) Variable speed options
Breeze! #2101XPA
Features: Adj Speed Control, Rear #2102XPA #3129KA
Exhaust, Quick Change Slip Chuck. & #ING-327 (High-Speed) #2101XPA-QC (4pc Kit)
Lock-off Lever.
• Free Speed: 2,800 rpm (Max Free Speed of 22,000rpm) Surface Prep Sander #3129XPA
#CPT-873 SPECIAL Ideal for rust, surface deposits and hard Drill
to reach welds.
MSRP $148.00 $89.99 Adjustable speed. 1/4” Chuck/Shank
Variable speed options
SPECIAL #ING-327LS (Low-Speed) #3103KA
(15pc Kit) #7804KA
$99.99 (Max Free Speed of 3,000rpm) #3103XPA (22pc Drill Bit Kit)
KIT SPECIAL Random Orbital Sander #7804XPA
Includes Whip Hose $119.99 Great for feather edging,
& Exhaust Hose removing rust,
surface prep,
#CPT-873K and smoothing welds.
• Free Speed: 15,000 RPM
MSRP $171.00
#3128KA
SPECIAL (71pc Kit)
#3128XPA
$119.99
RIVETERS RIVETERS Part # Description MSRP SPECIAL
#AST-PR36 STANDARD - Pulling up to 2,200 lbs #2101KA 1/4” Mini Impact Tool Kit $218.00 $164.99
#2101XPA 1/4” Impact Tool $199.00 $144.99
(3/16” rivets) Includes (4) nose pieces: #2102XPA 3/8” Impact Tool $199.00 $144.99
Includes (5) nose pieces: + 3/32”, 1/8”, 5/32”, & 3/16” #2101XPA-QC $209.00 $159.99
+ 3/16", 5/32", 1/8", 3/32",1/4" #3103KA 1/4” Quick Change Impact Tool $168.00 $124.99
MSRP $122.85 #CPT-9882 #3103XPA Mini Surface Prep Sander Kit $142.00 $99.99
#3128KA Mini Surface Prep Sander Tool $194.00 $149.99
SPECIAL MSRP $214.00 Mini Random Orbital Sander Kit
$94.99 SPECIAL
$149.99
#AST-PR14 HEAVY-DUTY - Pulling up to 3,530 lbs #3128XPA Mini Random Orbital Sander Tool $171.00 $129.99
(1/4” rivets) Low vibrations and low noise level. #3129KA Mini Polisher Kit $199.00 $149.99
Includes (5) nose pieces: Includes (3) nose pieces: #3129XPA Mini Polisher Tool $180.00 $134.99
+ 1/4", 3/16", 5/32",1/8", 3/32" + 3/16”, 1/4”, & 1/4” monobolt #7804KA $185.00 $139.99
MSRP $153.33 #7804XPA Mini Drill Kit $156.00 $119.99
#CPT-9884 Mini Drill Tool
SPECIAL
MSRP $872.00
$119.99
SPECIAL
$574.99
SHOP EQUIPMENTAIR HOSES & EQUIPMENT ZILLAREEL PRO HOSE REEL
3/8” x 50ft ZillaReel™ HOSE REEL Levelwind™ Technology
Positive Latching Mechanism, locks hose at desired length. Durable Construction
Made of High-Quality impact resistant ABS. Free Standing Base
Mounting Bracket: works on wall or ceiling.
3ft x 1/4” MNPT Lead-in Hose. Latching Mode Switch
Auto-Rewind Mechanism (7) Position Locking Bracket
#LEG-L8250FZ #LEG-L8305FZ (3/8” x 50ft) TM
MSRP $164.86 MSRP $288.06 125psi PROTABLE
SPECIAL SPECIAL $224.99 AIR TANKS
$149.99 #LEG-L8335FZ (1/2” x 50ft) Features: Built-in pressure by
-pass valve, Heavy gauge steel
REVOLUTIONARY AIR HOSES MSRP $322.08 construction w/ rust free finish,
***WON’T KINK Under Pressure!*** SPECIAL $249.99 4ft rubber hose, & Durable
Maximum Working Pressure: 300PSI valve chuck.
Offers Extreme All-Weather Flexibility = even in sub-zero Retractable Air Hose Reels w/ Hose
conditions. - Field Tested From -40° to 140° F 5-GALLON 10-GALLON
Premium Hybrid Polymer Material = redefines flexibility. DURABLE - Heavy-gauge, steel construction, w/ durable hose. #W1005 #W1010A
Zero Memory = stays flat & won’t work against you or coil after use. EASE OF INSTALLATION - Slotted mounting base SPECIAL SPECIAL
Abrasion-resistant outer cover and bend restrictors reduce wear & tear. for easy attachment to ceiling, walls, work benches.
Plus (5) position adjustable outlet roller arm. $49.99 $69.99
#LEG-HFZ3825YW2
#LNC-83753 (3/8“ x 50‘, 3/8” NPT)
(3/8” x 25ft, 3/8” NPT) $29.99
#LEG-HFZ3850YW2 MSRP $218.31
(3/8” x 50ft, 3/8” NPT) $44.99 SPECIAL $179.99
#LEG-HFZ1225YW3
#LNC-83754 (1/2“ x 50‘, 1/2” NPT)
(1/2” x 25ft, 3/8” NPT) $39.99
#LEG-HFZ1250YW3 MSRP $245.61
(1/2” x 50ft, 3/8” NPT) $69.99 SPECIAL $199.99
#LEG-HFZ1250YW4
3/8” x 50ft PVC AIR HOSE SideWinder AIR HOSE REEL
(1/2” x 50ft, 1/2” NPT) $79.99
Up to 300PSI & temps from -20°F to 145°F. Capacity: 150 feet of 5/8” O.D. hose.
3/8” FLEX-ZILLA® WHIP HOSES Band restrictions for increased hose life. *Air Hose NOT INCLUDED
Two Year Warranty.
Increases longevity of the main hose. #LIS-50350
Reduces user fatigue by eliminating weight of coupler/plug. #AMF-554-50A
Ball Swivel increases mobility, 30° tilt in any direction. SPECIAL MSRP $107.75
Improves air tool ergonomics.
$24.99 SPECIAL
#LEG-HFZ3802YW2B (2ft) $19.99
DELUXE BLOW GUNS $89.99
#LEG-HFZ3806YW2B (6ft) $29.99
w/ RUBBER TIPS Air Suction / Blow-Gun Kit
Also Available in 1/4” and 1/2” hose diameters Angled nozzle w/ removable rubber
tip gets into tight places. This 2-in-1 tool can be used either
25ft NYLON RECOIL AIR HOSES Comes with brass air inlet. as air blow gun, or as a air vacuum gun
Use for cleaning or to suctions dust, wood chips, metal
Swivel end fittings reduce hose twist. #AST-1717 (green 4”) shavings, glass, etc.
Temperature Range: 32° F to 120° F. #AST-1718 (orange 4”) Easy switch from blowing function to suctioning func-
Working Pressure: 200 PSI SPECIAL $9.99 tion with simple switch of the main valve.
#AMF-4-25E-RET (1/4”) #AST-1715 (green 13”) #AST-1745
SPECIAL $11.99
SPECIAL $9.99 MSRP $53.33
#AST-1716 (orange 20”)
#AMF-6-25 (3/8”) SPECIAL $13.99 SPECIAL
SPECIAL $39.99 $39.99
BLOW GUN 10pc Blow Gun Kit 8pc Blow Gun Set Heavy-Duty Truck
w/ 2ft EXTENSION CYCLONE® F1™ Blow Gun: Cast Aluminum (1) Blow Gun Air Seat Blowgun Kit
Comes w/ both safety nozzle and rubber tip. Body, Ergonomic Comfort Grip, & High Airflow. Multiple Tips (1 each):
End of blowgun is bent for hard to reach areas. KIT INCLUDES + Rubber, Air Screen, Brass, Safety, Use on trucks w/ air ride seat systems, & is the
Adjustable , Nylon, & Safety Booster Tip fastest & easiest way to clean the interior of
#TFL-18217 + (2) 6” Extensions 1/4" NPT (F) truck cabs.
SPECIAL + Needle Tips (1”/2”/3”) Includes: 11-1/2’ extendable hose,
+ Quiet-Flo Safety Nozzle #TIT-19436 blow gun w/
$19.99 + Rubber Tip Nozzle 2-nozzles &
+ Cyclone Tip Adapter SPECIAL Splicing tee.
#LEG-AG1500KIT $14.99 #AMF-10-11K
SPECIAL $19.99
$44.99
Universal Universal HI-FLO PLUGS HI-FLO COUPLERS Air Line Desiccant
Brass Couplers Composite Couplers Max working pressure of 300 PSI. Max working pressure of 300 PSI. Filter/Dryer
I/M V-Style are specifically designed I/M V-Style are specifically designed
Max working pressure of 300 PSI. Max working pressure of 300 PSI. for HVLP situations, such as: paint for HVLP situations, such as: paint Extend the life of your tools by
Works with the 3 major 1/4” nipple Works with the 3 major 1/4” nipple spray guns, abrasive blast cabinets, & spray guns, abrasive blast cabinets, & removing dirst, dust, water and oil
styles: Aro, Milton, & Tru-Flate. styles: Aro, Milton, & Tru-Flate. high cfm air tools. high cfm air tools. from your air lines. Works with any
1/4” NPT Air System.
#TFL-13513 (Male) #TFL-13809 (Male) #AMF-CP91 (Male) #AMF-C91 (Male)
#TFL-13515 (Female) #TFL-13811 (Female) #AMF-CP90 (Female) #AMF-C90 (Female) #TFL-41103
$4.99 $10.99 $0.99 $5.99 SPECIAL
$11.99
COMPRESSORS
ALL SEASON #ING-38436739-1 Electric-Driven Single-Stage Air Compressor SHOP EQUIPMENT
COMPRESSOR OIL $19.99 w/ FREE Start-Up Kit
Increase efficiency, reduce Ideal for almost anyone; from individuals that thrive on do-it-yourself projects,
to the professional air compressor user. This compressor features maximum air power, reliable
wear & prevent carbon buildup.
precision engineered components, and a durable design that is built to last.
Performs 4x’s longer than
Features
TM petroleum-based lubricants.
*Available in cases of 12 100% continuous duty applications
High capacity compressor (up to 18.1 cfm@ 90 pisg).
Quiet Rotary Screw Compressors Efficient finger valves that are easy to maintain
Whisper-Quiet motor allows for continuous, Specifications
discreet use in ALL shop settings.
Tank = 60 gal vertical
Features Max Pressure = 135 psig
Engineered for high performance, efficiency and reliability Nominal Power = 5 hp
Compact, unobtrusive design means it can be installed almost anywhere. Flow @ Max Pressure = 15.5 cfm
Optional mounted dryer (Tank mounted models only). Base Length x Width x Height = 20” x 30” x 71”
100% continuous use Weight = 310 lbs
NPT Outlet = 1/2”
Specifications #ING-SS5L5
3, 5, 7.5, 10 and 15HP models available MSRP $1341.00
Operate at a smooth 61-68 dBa.
60-120 gallon receiver tank. PLEASE CALL
125-150 psig FOR PRICE
Up to 52 CFM!
PLEASE CALL Electric-Driven Two-Stage Air Compressor
FOR PRICE w/ FREE Start-Up Kit
& Designed for heavy shop or industrial use, providing the reliability and performance that are ideal
for most applications & users including: automotive service and body shops, fleet maintenance,
AVAILABLE
*With Authorized Start-up machine shops, production and manufacturing lines, wood working shops, dry cleaners, car
UNITS! washes, general maintenance/repair shops and farms.
Portable Single-Stage Garage Compressor Features
w/ FREE Start-Up Kit Durable cast iron design for 100% continuous duty application
Precision engineered components for high reliability
Designed for professionals and serious do-it-yourselfers, Individually cast cylinders, overhung crankshaft and one
the Garage Mate is ideal for the home, shop or job site. piece connecting rod for ease of maintenance and service
High efficiency finger valves
Features
Specifications
Cast-iron body & oil-lubricated pump; for solid, reliable performance.
Pressure switch, pressure gauge, regulator, safety valve, manual drain, & 6-ft power cord. Tank = 80 gal vertical
Max Pressure = 175 psig
Specifications Nominal Power = 5hp
Flow @ Max Pressure = 16.8 cfm
Tank = 30 gal horizontal Base Length x Width x Height = 48” x 40” x 76”
Max Pressure = 135 psig Weight = 597 lbs
Nominal Power = 2 hp (4hp MAX) NPT Outlet = 3/4””
Flow Pressure = 5.7 cfm @ 90psig
Base Length x Width x Height = 46” x 25” x 35” #ING-2475N5V
Weight = 185 lbs
NPT Outlet = 3/8” MSRP $2903.00
#ING-SS3F2GM PLEASE CALL
MSRP $1031.00 FOR PRICE
PLEASE CALL Electric-Driven Two-Stage Air Compressors
FOR PRICE w/ FREE Start-Up Kit
Two-Stage Gas-Powered Air Compressor Designed for heavy shop or industrial use, providing the reliability and performance that are ideal
for most applications & users including: automotive service and body shops, fleet maintenance,
w/ FREE Start-Up Kit
machine shops, production and manufacturing lines, wood working shops, dry cleaners, car
Ideal for fleet & field service applications, remote pneumatic applications, emergency production washes, general maintenance/repair shops and farms.
line needs, and other situations where electrical power is scarce, these compressors deliver the air
Features
you need, when and where you need it.
Equip w/ Honda Engine, truck-bed mounting, these compressors include electronic ignition, idle Durable cast iron design for 100% continuous duty application
engine control, a 30-gallon ASME receiver, an OSHA approved fully enclosed belt guard and a Precision engineered components for high reliability
weather-resistant powder-coat paint finish. Individually cast cylinders, overhung crankshaft and one
piece connecting rod for ease of maintenance and service
Features High efficiency finger valves
Durable cast iron for 100% continuous duty application Extra Features w/ Premium Packages
Precision engineered components for over 15,000 hours of trouble-free use
Advanced safety features including low oil-level shutdown for gas engines + Electric vs. Manual Drain
+ Air Cooled Aftercooler
Specifications + Low Oil Lever Switch
Tank = 30 gal horizontal Specifications
Max Pressure = 175 psig
Nominal Power = 13 hp Tank = 80 gal vertical
Flow @ Max Pressure = 25 cfm Max Pressure = 175 psig
Base Length x Width x Height = 51” x 33” x 44” Nominal Power = 7.5 hp
Weight = 469 lbs Flow @ Max Pressure = 24 cfm
NPT Outlet = 1/2” Base Length x Width x Height = 48” x 40” x 76”
Weight = 611 lbs
#ING-2475F13GH NPT Outlet = 3/4”
MSRP $3822.00 #ING-2475N75V #ING-2475N75P
*Value Package *Premium Package
MSRP $3161.00 MSRP $3620.00
PLEASE CALL PLEASE CALL
FOR PRICE FOR PRICE
CREEPERS & SEATS
SHOP EQUIPMENT BONE-STER™ by PEGUSUS PEGUSUS BONE CREEPERS FOLD-UP CREEPER TM
New Mechanic‘s Creeper #BHK-BH6031 Works great on off road
is Comfortable, Affordable The Original Bone™ situations and under a
vehicle where no jacks or
and Guaranteed! MSRP $220.80 lifts are used. Folds up and
hangsfor convenient
#BHK-BH4031 SPECIAL storage.
MSRP $169.04 $164.99 #LIS-95002
SPECIAL The Only SPECIAL
Creepers w/
$124.99 $34.99
a Lifetime
The Only Warranty on
Creepers w/ its Wheels!
a Lifetime #BHK-BH7031
Warranty on Rough Rider™
its Wheels!
MSRP $260.86
SPECIAL
$199.99
40” PADDED CREEPER LOW PROFILE PLASTIC CREEPERS
w/ (6) SWIVEL CASTERS Body Fitting Design provides optimum comfort.
Weight Capacity: 350 lbs Heavy Duty Pop-In Urethane Wheels provide smooth maneuverability.
Dimensions: 40-1/8” x 17” x 4”
Vinyl Padded Head & Back Rest STANDARD (2”) Dimensions: 38” (L) x 17-1/2” (W) x 4” (H). With only 7/8” floor clearance. LARGE WHEEL (4”)
Heavy-Duty Frame #LIS-92102 (red) Weight: under 15 lbs. #LIS-92032 (Red)
#PRO-C1004 #LIS-93102 (yellow) #LIS-93032 (Yellow)
MSRP $54.41 #LIS-93202 (neon orange) #LIS-94032 (Blue)
SPECIAL #LIS-93602 (pink) MSRP $129.75
$49.99 #LIS-94102 (blue) SPECIAL
#LIS-97102 (black) $99.99
#LIS-99102 (neon green)
MSRP $100.05
SPECIAL Bigger Wheels
For a Better Ride!
$84.99
DELUXE CREEPER Z-CREEPER THE TAIL BONE MECHANICS SEAT! LOW PROFILE SEAT Creeper
• 1" Rugged steel tube construction. CREEPER TO SEAT IN ONE MOTION The Tri-Wheel Base not only holds • The legs and wheels can be flipped
• Oversize frame for added comfort. tremendous weight but also allows for over for a 5" or 8" working height at the
• Tapered frame & head rest. Dimensions: 39-7/8” (L) x 19” (W) effortless mobility over air hoses, drop top of the seat cushion.
• 3-1/2" chrome casters w/ rubber tread. Weight Capacity: 450 lbs. cords, shop clutter, rough surfaces and • The backrest has a 3" adjustment range
• 5-Position headrest adjustment. Fully Upholstered Pad w/ a quick-release pin, or can be re-
• Rear drop frame design for extra leg (6) 3" Polyurethane Wheels much more! moved to be used as a knee creeper.
comfort. • (2) locking wheels.
#BHK-BH2450 #BHK-BH5031 • 30" wide by 13" deep.
MSRP $143.31 (Standard 5” Wheels) #LIS-93502
MSRP $210.78
SPECIAL MSRP $124.95
SPECIAL
$99.99 SPECIAL
$159.99
#OME-91452 $99.99
#BHK-BH5131
#SUN-8515 * Added Chair Position
MSRP $185.90 (Rough Rider 5⅜” Wheels)
MSRP $281.99 MSRP $240.86
SPECIAL
SPECIAL SPECIAL
$124.99
$179.99 $179.99
2-in-1 Shop Seat & Stool 3 Drawer Toolbox Creeper EZ Set Pneumatic TRACTOR SEAT
Weight Capacity: 300 lbs L x H x W): 18-1/4” x 14” x 19” Professional Shop Seat • Air cylinder for easy height adjustment
Seat Size: 14" x 7-7/8" Weight Capacity: 450 lbs. • Five 3-1/2" heavy duty, chrome finished
Step Size 14" x 9" Steel Frame Construction. • Five 2-1/2" casters for easy mobility casters with rubber tread.
(5) Swivel Casters, provides added Front & Back Tool Trays. • A 15-1/4" diagonal tool tray– 1" deep • Large, reinforced 17" diameter 1" deep
stability and mobility. Extra-Thick Seat Cushion. • 12-1/2" diagonal seat tool tray
(4) 3" Polyvinyl Wheels. • High height: 20-1/2"
#PRO-C2800 • Low height: 15-1/2" #SUN-8514
#OME-92450
MSRP $67.39 #SUN-8509 MSRP $201.99
MSRP $157.31
SPECIAL MSRP $108.99 SPECIAL
SPECIAL
$49.99 SPECIAL $149.99
$99.99
$79.99
TOOL STORAGE
SHOP SERIES: Ball Bearing Drawer Slides SHOP EQUIPMENT
TM Exceptional value at an Economical Cost!
NON-SLIP DRAWER LINER ROLLS • Features: 500lb capacity casters & 25lb capacity drawer slides.
• All models are 26” Wide. Vary in Height & Depth.
Designed to Protect both your • Also Available in Red (ie #WAT-SCA265RDB)
Tools & Storage Unites! • Also Available w/ Friction Drawer Slides (ie #WAT-SCA265RDF)
** Friction only come in Red. Part Numbers & Pricing Differ. **
CHESTS
#WAT-SPLINER17BK 4-Drawer Chest 4-Drawer Cabinet 5-Drawer Tool Center
#WAT-SCH264BKB #WAT-SCA264BKB
(16.5” W x 157” D) + Includes chest & cabinet
MSRP $183.60 MSRP $220.91 + 300lb capacity casters
SPECIAL
SPECIAL SPECIAL #SWAT-TC265BKB
$29.99
$139.99 $169.99 MSRP $265.64
CABINETS
#WAT-SPLINER23BK 5-Drawer Chest SPECIAL
#WAT-SCH265BKB
(22.5” W x 115” D) $199.99
MSRP $218.58
SPECIAL $19.99 5-Drawer Cabinet
SPECIAL #WAT-SCA265BKB
PORTABLE ORGANIZERS
$164.99 MSRP $294.44
Durable Construction & Organization
for Tools in a Compact Mobile Design. 2-Drawer Intermediate SPECIAL
#SWAT-IN262BKB
$219.99
MSRP $152.96
SPECIAL
$119.99
PLASTIC WATERLOO SERIES Multi-Purpose Organizers
#WAT-PP2314BK
Designed for work environments that need Use to Store & Organize Small Parts, Hardware, & Other Supplies in
(23” W x 10.5” D x 13.5” H) high-quality storage at an affordable cost! Separate Clear Compartments for Easy Viewing.
MSRP $84.53
• Includes: 1,100 lbs capacity 5” x 2” casters, (4) COMPARTMENT
SPECIAL 50lb ball-bearing drawer slides, & non-slip drawer liners.
Dimensions: 4.25”(W) x 12.2”(L) x 2.5”(H)
$64.99 • All models vary in Height & Depth. All compartments are the same size.
• Also Available in Black (ie #WAT-WCA266BK)
#WAT-PP1406BK #TIT-21267
5-Drawer Chest SPECIAL
(14” W x 8” D x 6.3” H) #WAT-WCH265RD
$5.99
$9.99 MSRP $340.00
(9) COMPARTMENT
#WAT-PP1709BK SPECIAL
Dimensions: 6.69”(W) x 18.11”(L) x 3.74”(H)
(17” W x 9.4” D x 9” H) $249.99 All compartments are the same size.
$15.99 6-Drawer Chest #TIT-21268
#WAT-WCH266RD SPECIAL
#WAT-PP2009BK
MSRP $260.51 $12.99
(20” W x 10.3” D x 9” H)
SPECIAL (12) COMPARTMENT
$19.99
$189.99 Dimensions: 6.3”(W) x 10.43”(L) x 9.25”(H)
#WAT-PP2310BK (8) Small & (4) Large Compartments
5-Drawer Cabinet
(23.5” W x 11” D x 10” H) #WAT-WCA265RD #TIT-21269
SPECIAL
$25.99 MSRP $396.67
$24.99
#WAT-PP2610BK SPECIAL
(26” W x 10” D x 10” H) $289.99
$29.99 PROFESSIONAL SERIES Fully Magnetized Stainless Steel Parts Trays
3-DRAWER METAL Designed for work environments where solid construction • Can be used upside-down or on side of vehicle.
#WAT-MP2012BK and high quality features aren’t an option, but a necessity! • Rubber covered magnets will not scratch metal.
(20” W x 9” D x 12” H) • Includes: 75lb ball-bearing drawer slides, Posi-Lock Latching #SUN-8817 #SUN-8810
System, gas struts for the lid, & non-slip drawer liners.
$69.99 • Also Available in Black (ie #WAT-PCA5211BK) (11-1/2" L x 11" W) (6" diameter)
- Quad Magnetic - Single Magnetic
6-Drawer Chest MSRP $59.99 MSRP $14.99
#WAT-PCH266RD
SPECIAL SPECIAL
MSRP $387.40
$44.99 $11.99
SPECIAL
#SUN-8814 #SUN-8812
$284.99
(14-1/4" L x 6-1/2" W) (9-1/2" L x 5-1/2" W)
5-Drawer Cabinet - Triple Magnetic - Double Magnetic
#WAT-PCA265RD MSRP $44.99 MSRP $30.99
MSRP $621.93 SPECIAL SPECIAL
SPECIAL $34.99
$454.99 $24.99
SHOP EQUIPMENTWORK CARTS & BENCHES 500lbs. CAPACITY 2-IN-1 TM
PROJECT CENTER WORKBENCH/SCAFFOLD CART CAN RACK
• Weight Capacity: 300lb & 25lb drawers. • Extends to two different heights: 21" & 32". • 14.5 ”(L) x 2.5” (W)
• Small-Parts Storage & Organization, • Workbench MDF work surface can be used for ham-
under removable work surface. mering, drilling, and woodworking. Also provides tool #VIM-P95
• Steel Sides include Peg Holes. tray, ruler & protractor graphics.
MSRP $50.16
5-Drawer (29” W x 20” D x 34.5” H) #AST-55600
SPECIAL$39.99
Features: UL Approved power strip MSRP $285.55
w/ 6ft cord, power tool holder,
& battery charger storage. SPECIAL
#WAT-SPPC5BK-P $199.99
MSRP $322.62
SPECIAL
$239.99
Metal Service Cart HEAVY-DUTY 2-SHELF 220lb CAPACITY ADJUSTABLE
w/ Locking Top & Drawer PLASTIC UTILITY CART WORK TABLE w/ DRAWER
• 4" wheels, 2 locking and 2 standard. Dimensions: 16”(W) x 30”(L) x 31”(H) & only 21lbs! • Designed to house working air tools, plus
• 16 gauge steel frame w/ 350 lb. load capacity Trays are 4” deep & can hold 300 lbs. standard screwdriver/pry-bar holder.
• 3" deep bottom shelf • 1” deep drawer.
• 35-5/16"(H) x 30"(L) x 16"(W) #AST-8330
#SUN-8019
SUN-8013A (Red) MSRP $137.55
SUN-8013ABK (Black) MSRP $216.99
SUN-8013ABL (Blue) SPECIAL
SPECIAL
MSRP $359.99 $99.99
$139.99
SPECIAL
YOUR
CHOICE
$249.99
Side Work Bench PRO 500lb Capacity
• Folds down when not in use. 5-Drawer Service Cart
#SUN-8004 (Red) Features: flip top locking lid, screwdriver / pry
#SUN-8004BK (Black)
#SUN-8004BL (Blue) bar holder, side work shelf, EVA foam liners.
MSRP $44.99 Durable Metal Service Cart Dimensions: 27"(L) x 40"(H) x 18.25"(W)
Overall Weight: 117-lbs
SPECIAL
#SUN-8045 (Red)
$34.99
• Dimensions: 16"(W) x 30"(L) x 35"(H) & only 37.5 lbs! #SUN-8045BK (Black)
Large Locking Screw Driver/Pry Bar Holder #SUN-8045BL (Blue)
• Casters: 4” diameter; 2-Locking
• Various hole sizes hold up to 26 items. MSRP $693.99
• Trays are 3” deep & can hold 350 lbs!
#SUN-8011 (Red) SPECIAL
#SUN-8011BK (Black) #SUN-8005SC
#SUN-8011BL (Blue) YOUR CHOICE
MSRP $62.99 MSRP $201.99 $439.99
SPECIAL SPECIAL
$49.99
Compact Slide Top Utility Cart $149.99
450 lbs. rated capacity
2 Drawers, 3" deep w/ EVA foam liners.
Large bottom shelf w/ extra clearance.
* Also available in RED #8035R
#SUN-8035
MSRP $567.99
SPECIAL
$359.99
SHOP MAINTANENCE
Professional 12gal 6.5HP Portable 5gal 6.5HP Cordless Wet-Dry Vacuum SHOP EQUIPMENT
TM Wet / Dry Vacuums Wet / Dry Vacuums Tank Size: 2-gal.
Voltage: 18 or 20v MAX
Replacement Powerful Motors w/ Ultra-Quiet Operation. Powerful Motor w/ Quiet Operation. Hose Length x Diameter: 5ft x 1-1/4"
Wet / Dry Filters 8” Rear Wheels, for better mobility. Durable Lock-On Hose: 1-1/2” x 7-ft Filter: Wet/Dry (washable & reusable)
Crush Resistant Hose: 1-1/2” x 12-ft + Accessory Assortment: Claw Nozzle, Attachments: Crevice & Wide Nozzle
Standard + Accessory Assortment: Claw Nozzle, Crevice Tool, Crevice Tool, & Adapter. *Battery & Charger Sold Separately - See
#SHO-903-04-00 Adapter, & Elbow Grip. Includes: Wall Storage Bracket, Ultra- page 7 for details*
Also Includes: (2) extension wands, Ultra-Web Car- Web Cartridge Filter, Filter Retainer, &
SPECIAL $14.99 tridge Filter, Filter Retainer, High-Efficiency Disposable High-Efficiency Disposable Filter Bag. #DWA-DCV580
Filter Bag, 12” Floor Nozzle, Brush Inset, & Squeegee
Insert. Specifications MSRP $179.44
Specifications Cord Length: 20ft SPECIAL
CFM: 200
Cord Length: 20ft $124.99
CFM: 195 #SHO-5872510
#SHO-9621210 MSRP $176.00
MSRP $196.00 SPECIAL
SPECIAL $144.99
$159.99
Professional Stainless Steel 4pc Super Absorbent Shammy
#SHO-903-50-00 #SHO-9621310
• All purpose: wash, dry, & polish.
SPECIAL $24.99 MSRP $296.00 • Durable non-scratching soft material.
• Reusable & machine washable.
SPECIAL • Towel Size: 24" Wide x 20" Long
• Material: 70% viscose,30% polyester
$249.99
#TIT-19920
NO SPLATTER PADS TRANSMISSION DRAIN FUNNELS SAND BLASTER SPECIAL
#LIS-17892 (22” X 23”) $9.99
Protects Floors & Work Area Includes: Hopper, Aluminum Blast Gun,
from Messy Oil Splatter. MSRP $26.40 and 15ft Material Hose PISTOL GRIP SPRAY CLEANER
Use with an air compressor to remove
#LIS-38750 SPECIAL rust, paint, graffiti, corrosion & scale Siphon Cleaning Gun, handles most
Compatible with any abrasive: silica, cleaning fluids, & is ideal for mixing water
(15” diameter) $19.99 sand, steel grit, glass beads & pecan or soap solutions for pressure cleaning.
shells Includes: 8ft clear vinyl tubing w/
SPECIAL #LIS-17902 (24” X 36”) Gravity feed for constant flow. weighted strain screen & fluid control
Operating Pressure: 90 PSI valve, plus 10” spray nozzle.
$9.99 MSRP $73.65 Minimum Air Requirement: 3.5 CFM @
50 PSI #TFL-18225
#LIS-38780 SPECIAL Hopper Capacity: 50 lbs SPECIAL
Nozzle Size: 3/16” $39.99
(22” square) $49.99 Air Inlet: ¼” NPT
SPECIAL #TIT-19450
$24.99 MSRP $107.40
SPECIAL
$89.99
GALVANIZED DRIP TRAY LARGE POLYETHYLENE DRIP PAN 110v WATERBOURNE ONLY
(17½” x 25¾” x 1”) (24” x 36” x 1 1/2”) PARTS WASHERS
#PLE-75755 #LIS-19722
SPECIAL 4½ Gal. SPILL-PROOF DRAIN PANS 3.5 GALLON
$14.99
$24.99 #LIS-17942 (Black) Can be moved easily
GALVANIZED DRAIN PANS #LIS-17952 (Green) Ideal for small garages & homes
#PLE-75750 (6gal - Radiator) MULTI-DRAIN TUB Seamless, rounded corner construction
$34.99
30 quart, (33” x 22” x 8”) YOUR CHOICE #IMP-20-PW312
#PLE-75751(3.5gal - Utility) #LIS-17922
$9.99 SPECIAL $19.99 MSRP $133.99
SPECIAL
$49.99
$99.99
55 GALLON DRUM NO SPLASH 20 GALLON
DRAIN FUNNEL Self draining.
#LIS-17912 Convenient removable work shelf.
Comes w/ parts basket
MSRP $60.45 for soaking small parts.
SPECIAL #IMP-20-PW20
$39.99 MSRP $229.99
SPECIAL
$189.99
FLUID TRANSFER & STORAGE
SHOP EQUIPMENT LIFT DRAINS ON WHEELS SPILL-FREE™ FUNNEL ALL PURPOSE PLASTIC FUNNELS TM
#LIS-11102 #PLE-75060 (1/2pt)
Eliminates trapped air pockets & controls the $1.49 Rotary Barrel Pump
(8-gal) proper amount of coolant entering system. Fits #PLE-75062 (1pt)
MSRP $183.65 $1.79 Fits 15, 30, & 55 gallon drums w/ 2" opening.
most domestics, imports & light duty trucks. #PLE-75064 (2qt) Dispenses 8-gallons per 100 revolutions.
SPECIAL $2.49 Made from polyphenylene sulfide (PPS)
NEW FEATURES INCLUDE: w/ fluorine rubber and Teflon(R) seals.
$124.99 SUPER FUNNEL Safe to use with: thinners, acetone,
45 degree elbow: use on radiator caps #LIS-19802 DEF (Urea), gasoline, water, weak acids,
#LIS-17432 that are placed at an angle. windshield washer fluid, anti-freeze,
5” extension: access to caps located (Threaded 2pc Design) diesel, alkalines, and petroleum.
(18 gal) under shrouds or in fender wells. MSRP $9.30
MSRP $301.40 E adapter: works on surge tanks #TOO-17580
on many Ford applications. SPECIAL
SPECIAL MSRP $121.95
#LIS-24680 $6.99
$199.99 SPECIAL
MSRP $43.95 1.6qt POLYPROPYLENE FUNNEL
GALVANIZED FUNNELS $99.99
#PLE-75002 SPECIAL Translucent color allows you to see the fluid.
OAL: 15.25” x 6.69” wide DEF BARREL PUMPS
(6qt offset) $39.99 4” hole on top of the funnel.
#PLE-55155
$29.99 FLEX FUNNELS #LIS-19832
#PLE-75004 (Rotary Action)
#PLE-75007 MSRP $16.45 MSRP $191.81
(8qt tractor)
(1qt Galvanized) SPECIAL SPECIAL
$24.99
#PLE-75008 $9.99 $14.99 $139.99
(8qt lock-on tractor) #PLE-75074 1.6qt TRANSAXLE FUNNEL #PLE-55156 (Lever Action)
$29.99 (1 Pint, 2pc Design Translucent color allows you to see the fluid. MSRP $59.88
w/ 12” Detachable Spout) OAL: 15.25” x 6.69” wide
RIGHT ANGLE FUNNEL 4” hole on top of the funnel. SPECIAL
$4.99
Useful for adding brake fluid to master cylin- #LIS-17252 $49.99
ders on mini-vans, adding gear lube to differen- #PLE-75101
tials, filling the DEF reservoir on GM Duramax MSRP $34.95 STANDARD
diesels as well as other hard-to-reach areas. (1/2 Pint w/ 13” Flex Hose) BARREL PUMPS
10" Tall w/ a 6-3/4" Offset SPECIAL #PLE-55123 (Lever Action)
from Center of Mouth to $4.99
Center of Spout. $29.99 $49.99
POLYETHYLENE #PLE-G402 (Rotary Action)
#LIS-17232 CORROSION RESISTANT FUNNELS
#PLE-75070 (2qt) $79.99
MSRP $12.95 $4.99
Professional 17-Gallon
SPECIAL #PLE-75072 (6qt) Low Profile Truck Drains
$9.99
$9.99 Reservoir molded from lightweight high-impact
#LIS-18232 (w/ Lid) FLUID TRANSFER PUMP Air Powered Single-Acting polypropylene & mounted on 4” swivel casters.
Top of the Reservoir features large 20” x 29”
MSRP $19.95 Quick & Easy method to transfer or siphon all Grease Pump Lube Systems recessed area for capturing fluid, and a remov-
types of fluids including gas, oil, transmission able metal screen that keeps out debris.
SPECIAL fluid, water, etc. Also can be used to inflate a Standard high pressure grease pump Recessed Pockets at each corner provide
wide-range of items (inflation needle included). with a 40:1 ratio. storage for drain plugs and filters.
$15.99 Made of durable polyethylene & will not rust or #4417 - fits 120 lb. drums.
corrode. #4489 - fits any 25-50lb. refinery container. #LNC-3667
Professional Rotary Pumps
#MTY-MV7241 #LNC-4417 Manually Operated Rotary Pump mounted
Transfers most automotive fluids & features a horizontally to the front of the reservoir.
graphite 3-vane design for smooth flow w/ $19.99 Comes w/ Dolly 6ft Discharge Hose w/ a
no-splash. Includes a 8' x 3/4" antistatic hose MSRP $1002.65 J-Hook style spout w/ drip plug.
w/ a non-sparking aluminum nozzle & hanger. MSRP $512.50
Fits 16 & 55 gal. drums w/ 2" bungs & transfers: SPECIAL
10 gal/min @ 120rpm (low-viscous fluids) SPECIAL
7 gal/min @ 80rpm (heavier oils) $849.99
1 gal/min per 12 revolutions. $429.99
25-GALLON Fuel Caddies #LNC-4489
#LNC-1385 (NO HOSE) #LNC-3669
Safe & convenient extraction, dispensing, and MSRP $935.00
MSRP $201.10 storage of unleaded gasoline, kerosene and Durable 120v Electric Pump
diesel fuels in automotive service shops. SPECIAL installed below the front of the
SPECIAL Steel tank w/ volume level sight gauge, & 2- reservoir for protection.
way rotary pump that dispenses or extracts fuel $774.99 6ft Discharge Hose w/ a
$149.99 at a rate of 1 gallon per 12 revolutions. J-Hook style spout w/ drip plug.
#LNC-1385H Additional Features; 7ft Wire-Reinforced Fluid 120 lb High Pressure Air Operated MSRP $640.65
Transfer Hose w/ Anti-Spark Tip, Safety Ground
MSRP $254.00 Wire, Fire-Screened Vented Cap (prevents tank Portable Grease Pump Package SPECIAL
pressurization), & Screened Filler Neck w/
SPECIAL Manual Fill Pipe (allows fuel to be poured-in SPECIFICATIONS $524.99
manually).
$199.99 Free Delivery = 80 cu. In. per minute
#LNC-3675 Max Pressure = 7500 psi
Ratio = 50:1
MSRP $698.00
INCLUDES:
SPECIAL
Double-Acting Grease Pump
$549.99 Heavy-Duty Control Valve
Universal Swivel & Coupler
#LNC-3677 7ft Grease Hose.
Drum Cover
(2-way Filter System) Flexible Follower Plate
MSRP $861.00 4-wheel Band Dolly Base
SPECIAL #LNC-6917
$699.99 MSRP $1217.95
SPECIAL
$999.99
FLUID TRANSFER & STORAGE
TM EVACUATION DRAINS Combination Used Fluid 8gal Air Operated SHOP EQUIPMENT
Drain & Evacuator
ATF REFILL SYSTEM 18-Gallon Used Fluid Receiver Oil Changer
Collect fluids by gravity, or using a venturi
(10) adapters used to connect to Ford, Toyota, All steel design, w/ 14” telescoping bowl adjusts vacuum assembly to extract fluids directly from Extract used oil & other fluids from any vehicle
from 45”-72”, includes reservoirs or through a dipstick tube. using the venture vacuum extracting system.
BMW, Honda, Nissan, VW, Audi, Mercedes and a preset air regulator used w/ Mercedes, BMW, & VW dipstick tube adapters Includes 6 suction probes (metal & flexible)
Volvo transmissions. standard shop air. Receiver and (6) evacuation wands of varying flexibility, equipped w/ quick-disconnect couplers
includes a safety valve & a diameter and length. for fluid extraction. Self-evacuating
Reservoir lid w/ integrated manual pump, reinforced dispensing hose Tank-mounted clip and handle hook to secure makes emptying clean & easy.
pressure gauge and pressure relief valve. that doubles as a sight gauge both the 7 ft. nylon-reinforced discharge hose
to prevent overfilling. and the 6-1/2 ft. wire-reinforced evacuation #AST-7351
5 foot fluid dispensing hose w/ flow control hose.
& auto shutoff valves. #LNC-3601 Additional Features: MSRP $342.75
Fluid dispensing wand & Hanging hook. MSRP $331.60 + Safety-Valve SPECIAL
+ Convenient Tool Tray
#MTY-MV6410 #MTY-MV6412 SPECIAL + Fluid Level Sight Gauge $229.99
+ Combination air chuck / pressure relief
(1.2 Gallon) (2.5 Gallon) $259.99 FLUID EVACUATORS
valve.
MSRP $369.50 MSRP $394.65 20-Gallon Pressurized Drain APPLICATIONS:
#LNC-3639 Convenient evacuation of fluids from virtually
SPECIAL SPECIAL Drain, transfer, & evacuate used oils w/ the 18” any type of reservoir or tank; i.e. transmission
offset bowl that adjusts MSRP $700.00 fluid, engine oil, brake fluid, coolants, power
$279.99 $319.99 from 44”-72” and catches fluid
w/out repositioning tank. SPECIAL steering fluid, & gear oil.
Extended Tube Kit Includes fixed air regulator, KEY FEATURES:
pressure relief valve and $549.99
Extend reach of Mityvac’s fluid evacuators up hose hanger. Averages Automatic shut-off . Quick-drain pour spout.
to 6ft. 15-20 vehicles before tank Painted Flex Spout Measurers Polyethylene chemical resistant construction.
The kit contains a main evacuation tube, two evacuation.
smaller diameter tubes for extending into dip- Features: Thumb Operated Valve & 14” Spout. Large stable base.
stick tubes, and tube connectors. #LNC-3614
Each tube is 3ft longer than standard, making #PLE-75662 MAUALLY OPERATED
it convenient for evacuating fluids from taller MSRP $775.90
vehicles such as SUVs and full size trucks. (2 quarts) Requires no electricity or compressed air.
SPECIAL Comes w/ (3) evacuation
#MTY-MVA6006 $49.99 tubes & adapters.
SPECIAL $629.99 #PLE-75664
$24.99 #MTY-MV7400
26-Gallon Pressurized Drain (4 quarts)
POLYETHYLENE OIL - 1.9 Gallon Capacity
DISPENSERS Tank & Bowl made from high strength $59.99 MSRP $104.55
polyethylene - no dents or corrosion. #PLE-75665
The #LIS19702 comes w/ a detachable lid. Large tool tray & convenient SPECIAL
oil filter drain built into the top (5 quarts)
#LIS-19732 (6 QT) of the tank. $84.99
Fluid level sight gauge, $69.99
MSRP $24.70 fixed air regulator, & safety #MTY-MV7201
relief valve. Painted Flex Spout Measurers
SPECIAL - Reversing Valve
#LNC-3624 Features: Spill-Proof Tops & Fill-Line. allows for evacuating
$15.99 or dispensing fluids.
#LIS-19702 (8 QT) MSRP $871.50 #PLE-75441 - 2.3 Gallon Capacity
MSRP $159.40
MSRP $30.75 SPECIAL (1 quart)
SPECIAL
SPECIAL $699.99 $14.99
#PLE-75442 $124.99
$19.99 Brake Bleed
(2 quarts) PNEUMATIVAC
MULTI-PURPOSE Conversion Kit
SIPHON HOSE $19.99 Uses standard compressed
Quickly connects to Mityvac’s fluid evacuators; #PLE-75444 shop-air & a powerful venture
#PLE-75847 converting them into one-person vacuum brake vacuum to extract fluids in just
$6.99 or hydraulic clutch bleeders. (4 quarts) one minute.
#MTY-MVA7205 $24.99 #MTY-MV7300
SPECIAL
$29.99 SUCTION GUNS - 2.3 Gallon Capacity
MSRP $160.15
6qt POWER EXTRACTOR w/ 12” EXTENSIONS
#PLE-30118 SPECIAL
Includes dipstick probe for oil changes $14.99
and flexible tube for vacuum brake bleeding. $119.99
Not compatible for oil changes with:
Most late model GM V8s, 2000-02 Ford SUV, 2qt Battery Filler
2000 Ford Taurus, GM- late models w/ V8,
1999-2001 Pontiac TransAm, Shuts off automatically when battery cell is at
1992-94 & 09 Toyota Camry, proper level, no over filling.
2004 Toyota Highlander, Safe to use w/ battery acid.
2002 & newer Porsche Carrera, Made of polyethylene.
96 Land Rover w/ 4.0L V-8.
#PLE-75030
#MOT-1715 $14.99
SPECIAL
$74.99 3gal Radiator Filer
Made of polyethylene, won’t damage automotive
finishes. Impervious to oil, gasoline, & anti-
freeze.
#PLE-75025
$29.99
LIFTING EQUIPMENT - FLOOR JACKS
SHOP EQUIPMENT 3ton HYDRAULIC SERVICE JACKS Long Chassis Service Jacks
STANDARD All of the following jacks feature: safety by-pass & over-load systems,
heavy-gauge steel frame, convenient foot pedal, & a 40-5/8” long handle.
Lift Range: 5-1/4” to 19”
AIR ACTUATED TM
#BHK-BH6034
High-speed Air Turbo Motor. 5ton Long Chassis
MSRP $257.82 Lift Range: 7” to 27”
Service Jack
SPECIAL #BHK-BH6051
Foot Pedal speeds lifting operation, 3-position
$199.99 (5 ton) locking 45-1/2” handle, & built in safety over-
load.
MAGIC LIFT $959.99 Lift Range: 5-7/8” to 22”
Weight: 210 lbs
Lift Range: 5-3/4” to 20” #BHK-BH6011
#AST-500EX
#OME-25030 (10 ton)
MSRP $1013.10
MSRP $268.71 $1499.99
SPECIAL
SPECIAL FAST LIFT
$679.99
$199.99 Safety by-pass & over-load systems,
heavy-gauge steel frame, & foot pedal.
3ton Aluminum Floor Jack
#BHK-BH6057
Rapid-Rise Technology w/ Dual-Pistons = Max Height in 6 Pumps.
Full Aluminum Body Construction, only 58 lbs! (5 ton / 6½” - 22¼”)
Lift Range: 3.8” to 19.3”
$699.99
#SUN-6603ASJ Stinger Series Floor Jacks 20ton Long Chassis
MSRP $599.99 #OTC-5302 Service Jack
SPECIAL (2¼ ton, lifts 5” to 18”) Both Air and Manual pump options.
MSRP $199.95 Lift Range: 7-1/2” to 24-1/2”
$419.99 Weight: 589 lbs
SPECIAL
3pc Service Jack/Stand Kit #SUN-6620
$169.99
3.5-Ton Service Jack MSRP $3159.99
w/ Quick Lift Technology #OTC-5303
Pair of 6-Ton Jack Stands SPECIAL
(3 ton, lifts 5-3/4” to 18-1/2”)
#SUN-66037JPK MSRP $219.95 $2389.99
MSRP $436.99 SPECIAL
SPECIAL
$189.99
$299.99
HEAVY DUTY SERVICE JACKS
FAST LIFT SERVICE JACK COMBO
Both jacks feature a one piece 50in. handle, U-joint release mechanism,
3ton Floor Jack (lift range: 5¼” to 20⅞”)
Pair of 3ton Jack Stands (lift range: 11½” to 17”). full swivel rear casters, sealed hydraulic pump,
#BHK-BH6033 pressure relief valve, and cast iron lift arm.
MSRP $346.27 #HEI-HW93642 (2-Ton) #HEI-HW93652 (3-Ton) Long Chassis
SPECIAL Lift Range: 4-1/2” to 20-1/4” Lift Range: 5” to 23-1/2”.
$249.99 Length: 28-1/2” Length: 50” Service Jacks
Unit Weight: 90lbs. Unit Weight: 107lbs.
Foot Pedal speeds lifting operation (7” to 27”).
MSRP $682.22 MSRP $945.55 Spring loaded 40” handle & built in safety
SPECIAL overload.
SPECIAL #OTC-1505B
$599.99
$439.99 (5 ton, weighs 232 lbs.)
MSRP $1099.95
SPECIAL
$939.99
3½ton SPEEDY LIFT GARAGE FLOOR JACK Two Speed 3½ton Service Jack #OTC-1510B
1-2 pumps will to chassis. Extra Wide Lift Range – from 4" to 21". (10 ton, weighs 412 lbs.)
Rubber Saddle Pad, protects the vehicle. A long 48" spring-loaded handle. MSRP $1269.95
Magnetic Tool & Parts Tray Rolled edges add strength
Lift Range: 5½” - 22” & resist twisting. SPECIAL
#PRO-G737 #OTC-1526 $1079.99
MSRP $253.90 MSRP $299.95 Xtra Low Profile Floor Jack
SPECIAL SPECIAL LOWEST FLOOR JACK ON THE MARKET!
Locking Safety Bar Holds Load
$189.99 $254.99 w/out the Need for Jack Stands.
Lift Range: 2-3/4” to 15-1/2”
2ton LOW PROFILE FAST LIFT SERVICE JACK 2ton Low Rider Service Jack 4,000lb Capacity.
Weighs: 64 lbs.
Extra long low side frames designed for long reach under the car chassis. Rapid-Rise Technology w/ Dual-Pistons = Max Height in 6 Pumps.
Ideal for sports cars, exotic cars, & flat tires. #ALL-620479
#BHK-BH6023 Max height is high enough for pick-ups & SUV's.
Lift Range: 2.75" to 24" MSRP $192.00
(Lift Range: 2½” - 20”)
MSRP $515.00 #SUN-6602LP SPECIAL
SPECIAL MSRP $408.99 $159.99
$399.99 SPECIAL
$279.99
LIFTING EQUIPMENT - SPECIALITY SHOP EQUIPMENT
22ton Heavy Duty Truck Jack Full air actuation raises and lowers ram with turn of knob.
Springless design eliminates weathering, rusting,
and damage of springs.
w/ FREE 1” Extended Anvil Impact Wrench Jumbo 9" tires traverse over most terrains.
Comes w/ (3) Adapters: 0.8", 2.4", & 3.9"s
Lift Range: 8.9" to 21.7"
TM Shipping Weight: 73 lbs
Single Stage Axle Jack #SUN-6722 A $420.00 VALUE! 57% OFF
Heat treated extension screw allows low Total Value $2,021.98 • Torque: 1,600 ft-lbs
pick-up height adjustment & max lift height. • No Load Speed: 0-4,000 rpm
SPECIAL • Only 26.2 lbs
Sturdy one-piece handle assembly
& Chrome plated rams. $859.99
#BHK-BH6221 1/2ton Telescopic Transmission Jack Floor Style Transmission Jacks
(22 ton / 9⅞” - 22”) Fully adjustable universal saddle w/ The adjustable head can be tilted forward, backward, and
MSRP $957.04 corner brackets & safety chain, plus flash side-to-side. Hydraulic system is protected from internal damage by a
chromed ram, & safety overload system patented by-pass mechanism. Load restraining chain is vital for raising
SPECIAL Foot operated pump and lowering pedals and lowering safety.
allow use of both hands to position and
$649.99 align saddle w/ transmission #BHK-BH7011
44ton Under Axle Jack #AST-500H (1/2 ton / 8½” - 24¾”)
w/ Air Return MSRP $560.45
MSRP $971.50
Air actuation raises and lowers ram SPECIAL
with turn of a knob SPECIAL
Long 54” handle $359.99
Lift Range: 8-1/4” to 21” $649.99
Shipping Weight: 95lbs #BHK-BH7210
1/2ton Telescopic Transmission Jacks
(1 ton / 7⅞” - 33½”)
Feature: overload valve, foot activated pump/release pedal, universal MSRP $1,019.71
saddle w/ tie downs, and wide base legs w/ (4) swivel casters.
SPECIAL
$659.99
#SUN-6744 #SUN-7793B 1ton Low-Lift Transmission Jack
MSRP $2105.99 Lift Range: 35.5” to 75.5” Mounting adapter fits popular Eaton® Fuller® RoadRanger®
Shipping Weight: 167 lbs transmissions used on nearly all Class 7 & 8 heavy-duty trucks.
SPECIAL MSRP $999.99 • Swiveling pump handle permits ease of operation in restricted working
spaces. Fast-acting pump quickly raises lifting arm.
$1399.99 SPECIAL Lift Capacity: 2,200 lbs.
Lift Range: 8-1/4” to 36-1/2”.
22ton Self Ratcheting $689.99 OAL x OAW: 52” x 32-1/2”.
Under Axle Jack Weight: 330 lbs
AIR / HYDRAULIC
Long 49-1/2" T-handle, easily position #OTC-5019A
jack under vehicles w/ long overhangs. Lift Range: 35.5” to 73.5”
(3) Saddles: 3/4”, 1-15/16”, & 3-7/8”. Shipping Weight: 145 lbs MSRP $2829.95
MAX Lift Ranges: 17-3/4” to 20-7/8”
PSI Range: 90–145. #SUN-7796 SPECIAL
Shipping Weight: 110 lbs
MSRP $1699.99 $2399.99
#OTC-1788B
SPECIAL Hydraulic Transmission Jacks
MSRP $799.95
$1139.99 Rugged stable units. OTC1521A is ideal for all passenger car and light
SPECIAL truck work. OTC1522A is ideal for heavy duty truck transmissions.
$679.99 #OTC-1521A
350lb LAWN MOWER LIFT (1/2 ton)
MSRP $579.95
Rubber coated saddle to prevent movement.
Hydraulically powered foot pedal operation. 700lb Telescopic Transmission Jack SPECIAL
Positive dual locking safety latch.
(4) steel wheels for sturdy mobility. Extra wide base lowers center of gravity and promotes stability, plus $499.99
Wheel Span: 14” to 48” rugged steel wheels and swivel ball bearing casters.
Lift Height: ground to 20” #OTC-1522A
Item Weight: 77 lbs
(1 ton)
#PRO-T5350 MSRP $1699.95
MSRP $228.18 SPECIAL
SPECIAL $1439.99
$199.99 #BHK-BH7000 1½ton Transmission Jack
(700lb / 57” - 76”)
MSRP $627.16 Fully adjustable universal saddle w/ corner brackets & safety chain, plus
flash chromed ram, & safety overload system
SPECIAL Pump handle rotates 360° for all position operation.
$419.99 Low frame easily clears undercarriage obstacles,
w/ (4) swivel casters for easy positioning.
Lift Range: 9" - 37"
Net Weight: 320lbs.
#AST-1500EX
MSRP $1676.75
SPECIAL $1124.99
ENGINE SUPPORT / SPECIALITY
SHOP EQUIPMENT1250lb Capacity 700lb Engine Support Bar 700lb Engine Support Bar
Engine Stand Self-centers load preventing tipping, PVC Supports engines of FWD vehicles.
coated legs don’t scratch vehicle surfaces, and Includes 1/8" braided steel cables and 1/4"
Head Plate locks in 8-positions & rotates 360°. the spinner handle enables lighting fast adjust- adjustable hooks.
Overall Height = 42-3/4” ment. Adjustable Length:
Handle Length = 20-1/4”
Weight = 87 lbs + Min 31” & Max 64” TM
#BHK-BH5106 #OTC-1725 #AST-5820 PAIR OF 4000lb CAPACITY
LIFTING BRACKETS
MSRP $268.33 MSRP $299.95 MSRP $97.90
Attach directly onto component for lifting.
SPECIAL SPECIAL SPECIAL Requires 1/2” diameter bolts.
$179.99 $254.99 $79.99 #OTC-7100
$49.99
2000lb CAPACITY 4000lb Capacity Folding Floor Crane
3/4ton Lever Engine Sling
FOLDING ENGINE STAND Fold up for compact storage, out of your way.
Max Capacity w/ Boom Extended: 1000 lbs @ 48” Use w/ an Engine Crane
Dimensions: 33”(H) x 41.7”(L) x 28.5”(W) Max Capacity w/ Boom Retracted: 4000 lbs @ 26” Hand Crank to compensate
Resistant to Structural Flex. Wheel Diameters: Front 3-1/2” / Rear 5-7/8” for off balanced loads.
Reinforced Mounting Plate. (4) chains & Mounting
Locks in 8-Positions. #OTC-2004 Bracket included.
Weight = 132 lbs Weight: 225 lbs
MSRP $779.95
#SUN-8400 #SUN-5208
SPECIAL
MSRP $289.99 MSRP $102.97
$649.99
SPECIAL SPECIAL
$234.99 $79.99
1000lb H-FRAME ENGINE STAND 1.5ton Capacity Folding Floor Crane MOTOR LIFT SLING
Heavy duty tubular steel construction RapidRise Hydraulic Jack, raises boom 6x’s faster than other cranes. For Lifting Automotive Engines.
4-point universal mounting brackets fit most Chain & Swivel Hook Assembly, allow for easy positioning of engine. Bolts to Motor Mounting Holes.
domestic/import engines Features 4 Positions for different Capacity, Length, & Height. 600 lbs Lift Rating
360° rotating front casters & engine bracket Boom Length Range: 27” - 48” Weight: 2.7 lbs
Capacity Range: 750 - 3000 lbs.
Minimum Height Range: 0” - 11.75” #APP-PP7134
$24.99
#ALL-647513 #SUN-5218
2pc High-Grip Wheel Chocks
MSRP $115.86 MSRP $773.99
Works great on shop floors or lifts.
SPECIAL SPECIAL $499.99 Rubberized Material for extra slip resistance.
High Compression.
$99.99 8ton CRANE JACK 3ton LONG RAMS
#ERN-980
1000lb ENGINE CRADLE Fabricated from hard-cast steel Made especially for use w/ $19.99
w/ heat-treated critical stress areas engine cranes.
w/ 4 POSTS Height Range: 24-1/8” to 43-1/4”
Volume of Hydraulic Oil: 23.5 oz Collapsed height is 2 feet.
Heavy-Duty steel construction allows for
storing, moving & servicing engines. #BHK-BH2085 #IMP-20-LRJ3
Universal mounting holes w/ 8 bolts included
3/8” x 3/4”. MSRP $187.76 (Flat Base)
#ALL-647009 SPECIAL $74.99
$64.99
$124.99
1500lb MOTORCYCLE LIFTS
Features: 11.5” lifting saddles, Features: foot pedal release, 3/4ton WHEEL DOLLY
protective rubber pads, swivel casters,
locking rear casters, auto safety lock, Hydraulic system for removal & installation of
3-position safety lock, & (2) ratcheting tie down straps. single, tandem, and duplex tires and wheels; w/
& Multiple Tie-Down Points. lift arms can be adjusted to handle different
Lift Range: 3-1/2" to 16-3/4". wheel combinations.
Lift Range: 4-1/2” to 14-1/2” 17" skids Lift Range: 2¼” to 11”
Weighs: 63 lbs. Tilt Range: 2.5° to 10°.
#PRO-T2152 #OTC-1545 #BHK-BH8075
MSRP $155.29 MSRP $269.95 MSRP $717.02
SPECIAL $114.99 SPECIAL $229.99 SPECIAL $459.99
20ton PAIR OF WIDE TRUCK RAMPS 20ton PAIR OF TRUCK RAMPS
Long retractable t-handle Non-skid rubber matting enhances safety.
Non-skid rubber matting Durable heavy-duty rubber wheels.
Durable heavy-duty rubber wheels. Overall length: 45⅝“, tread width: 10¾”
Frame Length x Height: 47” x 9-1/4”
Frame Width: 18-1/4” #BHK-BH5200
#OTC-5269 MSRP $946.41
MSRP $999.95 SPECIAL
SPECIAL $599.99
$849.99
JACK STANDS / BOTTLE JACKS / SUPPORTS
USA MADE JACK STANDS JACK STAND COVERS HEAVY-DUTY JACK STANDS SHOP EQUIPMENT
3-TON Made of high-compression, rubberized material, & RATCHET STYLE
fits most 2-ton to 6-ton jack stands.
Height Range: 11-1/2” to 17” #BHK-BH5030 #BHK-BH5120
+ 5/8” intervals #ERN-965
SPECIAL (3-Ton pair) (12-Ton pair)
TM Weight( pair): 26-lbs $9.99
$39.99 $129.99
#HEI-HW93503
#BHK-BH5060
HYDRAULIC BOTTLE JACKS MSRP $143.10
(6-Ton pair)
SPECIAL
Heat treated extension screw allows low pick-up $69.99
$99.99height adjustment and maximum lift height. US
Patented built-in by-pass device protects hydrau-
lic system from over pumping damage. Cross- 6-TON
type forged release valve assures positive Height Range: 16-1/4” to 25-3/4”
control. A wide base provides stability &
+ 5/8” intervals
strength. JACK STANDS (PAIR)
Weight (pair): 45-lbs PIN STYLE
4-legged Steel Base w/ Pads for Stability #BHK-BH5010
2-TON #HEI-HW93506 Large Saddles w/ Locating Lugs for support.
#OME-10025B (10-Ton pair)
MSRP $213.37 #SUN-1003 *Range: 28” - 47”
$24.99 SPECIAL - Capacity: 3-TON $349.99
- Lift Range: 11¼” to 17”
4-TON $159.99 - Shipping Weight: 16 lbs #BHK-BH5220
#OME-10045B
$49.99 (22-Ton pair)
$34.99 12-Ton JACK STANDS
#SUN-1006 $229.99
6-TON Features: formed & welded steel frame, self-
#BHK-BH2060 lock ratchet handle, and baked enamel finish. - Capacity: 6-TON PORTO-POWER® SETS
Height Range: 19-1/2” to 30-3/4” - Lift Range: 15½” to 24”
$39.99 Base: 12-5/8” x 11-3/8” - Shipping Weight: 38.5 lbs Snaps together in seconds and has a built-in
overload system to assure you of maximum
8-TON #OTC-1784D $89.99 protection against equipment damage.
#BHK-BH2080 Features: heavy-walled extension tubes,
MSRP $219.95 #SUN-1012 flex-head w/ permanently molded rubber pad
$49.99
SPECIAL - Capacity: 12-TON (interlocked to prevent separation), long handle
- Lift Range: 19½” to 30”) providing low pumping effort, & 1/2 ton hydraulic
$199.99 - Shipping Weight: 75 lbs
spreader w/ 2” jaws & spreads 5/8” to 3-3/4”.
12-TON $199.99 Works w/ ALL Blackhawk Porto-Power
#OME-10125B equipment.
UNDERHOIST STANDS
$69.99 *20-Ton Kit NOW Available! Call for Price!
Straight Stand
#BHK-BH2125 22-Ton #AST-1175 #BHK-B65114
*Shorty-Type Heavy Duty - 1500 lb. Capacity (4-TON)
- Range: 55” to 81⅓” MSRP $354.12
$69.99 JACK STANDS
$119.99 SPECIAL
#OME-18124C Multiple Hole Locations, w/ pin attached to
avoid loss. $249.99
*Air Actuated Base: 10” x 10”.
Lift Range:11.8 x 19.7" Tripod Stand #BHK-B65115
$269.99 Saddle: 2.3” x 3.5". #AST-1102
Weight: 36lbs. each (10-TON)
20-TON - 2 ton Capacity MSRP $567.45
#BHK-BH2200 #SUN-1522 - Range: 55⅓” to 85¼”
SPECIAL
$99.99 MSRP $299.99 $134.99
$349.99
#BHK-BH2205 SPECIAL
*Shorty-Type $199.99
$114.99
#OME-18204C 4-Ton 48” POWER JACK 4 & 10 TON PORTA JACK KITS
*Air Actuated Lifting Nose = 4” OAL Industry standard couplers are interchange-
+ Low Pick-Up, only 4.5” from Base
$274.99 Features a Safety Shear Pin. UNDERHOIST STANDS able w/ leading manufacturer's units.
Single-speed hydraulic hand pump & ram
30-TON #APP-14100 Straight Stand
#BHK-BH2300 w/ 4" stoke (4-Ton) 6" stroke (10-Ton).
SPECIAL - 1500 lb. Capacity Snap design of extension tubes.
$279.99 - Range of 54¼” to 80¾”
$74.99 #OTC-2015 Automatic overload system prevent damage.
$119.99 1/2-ton hydraulic spreader tool has
HIGH PERFORMANCE 5-Year #OTC-2016 2" jaws that spread from 5/8" to 3-3/8".
Warranty Includes a sturdy plastic case.
BOTTLE JACKS (foot pedal)
3000lb SCISSORS JACK Carries a 2-year warranty.
Base, pressure cylinder, & oil reservoir from $139.99 Includes: hydraulic pump, hose, ram, ram flat
one internal part, provides more strength Spin Handle Grips & Ball Bearing Worm Gear
for Easy Turning. Lift Range: 4½” to 14”. Tripod Stand base, (4) extension tubes, 1/2 ton spreader,
Piston never contacts cylinder, so pressure will tube coupling, ram toe, wedge head, serrated
be absorbed & will not damage jack if vehicle #ALL-640819 - 2-Ton Capacity
tilts. SPECIAL - Range of 58⅞” to 91⅝” saddle, flex head, plunger toe, 90° wedge head,
$24.99 & case.
12-TON #OTC-2018A
#OTC-5213 $149.99 *10 ton storage case has wheels for mobility.
8-7/8” to 17-3/4” #OTC-1513B #OTC-1515B
Weight 18lbs.
(4-TON KIT) (10-TON KIT)
$159.99
MSRP $299.95 MSRP $459.95
20-TON
#OTC-5221 SPECIAL SPECIAL
9-1/4” to 18-1/16”, $259.99 $389.99
Weight 26.5lbs.
$199.99
MISCELLANEOUS
SHOP EQUIPMENTPROFESSIONAL SHOP VISES 5" BENCH VISE
With high quality construction for extra durability and full-strength performance at any jaw w/ SWIVEL JAWS & BASE
opening, these vises are made for the professional, strong, durable, and built to last..
Jaws rotate 360° for clamping at any angle!
#KEN-64055 #KEN-64065 TM
#TIT-22012
- 5.5" jaw width, - 6.5" jaw width, 25-Ton Shop Press
- Weighs 30 lbs - Weighs 41 lbs MSRP $226.98
MSRP $206.37 MSRP $268.06 w/ Hand Pump
SPECIAL
SPECIAL SPECIAL Heavy steel welded construction w/
$149.99 Multi-position bed (height adjustment)
Working Space: 2-1/2” to 34-1/4”
$149.99 $199.99 Ram Stroke of 6”.
Bed Position: 8
REVERSIBLE MECHANIC’S VISES Weight: 270-lbs
Increase your gripping capacity when you reverse the position of the front jaw. CHAIN HOIST #BHK-BH8202
#KEN-64650 #KEN-64800 MSRP $1115.30
- 6.5" jaw width, - 8" jaw width, 2-TON SPECIAL $699.99
- 11" reverse position
- 10" reverse position - Weighs 74 lbs #IMP-16-CH2
- Weighs 50 lbs
MSRP $385.16 MSRP $490.96 $159.99
SPECIAL SPECIAL
$239.99 $324.99
1-Ton EZ PULLER COME-A-LONGS
Makes Tough Projects an Easy One-Person Job! #IMP-16-LB112
Features: the ability to release 1 notch at a time,
galvanized air craft cable, drop forged steel (1-1/2” Ton CHAIN)
safety hooks, and contour grip.
One Piece Construction $164.99
8 Foot Length of Pull
Meets ASME & ANSI Standards #IMP-16-PP4
Meets OSHA Specifications
(4 Ton CABLE)
#APP-EZ2000
$34.99
SPECIAL $39.99
2-Ton POWER PULL 20-Ton Shop Press
Features - 36:1 Leverage, 2 Ton Capacity, 6ft Pull, & Galvanized Aircraft 3/16” Cable. Galvanized Steel Drum Fans Durable Return Springs for fast ram
Cast Aluminum Ratchet Wheel, Contoured Grip & Drop Forged Steel Safety Hooks.
Cable Limiter, keeps Two Wraps of Cable on the Ratchet Wheel. Lifetime Warranty Durable, corrosion resitant galvanized retraction.
Made in the USA Reinforced Head Plate
Releases Load One Notch-at-a-Time. steel housings built to last!
One-Piece Pulley Wheel, for Longer Cable Life. Durable wheels and non-skid legs to keep Safety Bypass valve assures unit
will not exceed rated capacity.
Zinc Plated for Rust Resistance. your fan in position while operating.
Non-corroding aluminium fan blads. Overall Height = 59-1/14”
Meets OSHA & ASME Specs. Weight: 8.1 lbs. Base Width = 29-1/2”
#APP-72A #SHO-1183200 #SHO-1184200 Stroke = 5-5/7”
SPECIAL $64.99 + 36” Diameter + 48” Diameter #AST-TS22
+ 10-11,000 CFM + 20-22,000 CFM
CABLE PULLERS SPECIAL SPECIAL MSRP $645.13
Features - 36:1 Leverage, and 6ft. Pull. Cable Limiter, Keeps Two $359.99 $579.99 SPECIAL $499.99
Wraps of Cable on the Ratchet Wheel. Releases Load One
Notch-at-a-Time. Meets OSHA & ASME Specs. 5-Year
Warranty
#APP-18600 (2-Ton w/ 3/16” Cable)
SPECIAL $34.99
#APP-18650 (4-Ton w/ 5/16” Cable) #18600 & #18650
SPECIAL $59.99
1-1/2-ton 600 SERIES CHAIN PULLER 5-Year
Warranty
Benefits: Thick Steel Construction, Heat-Treated,
& Drop Forged Safety Hooks. PREMIUM GARDEN HOSES PORTABLE WHEEL STEP
5’ Standard Lift w/ the Minimum Handle Length of 16-3/8”.
Chain Distance between Hooks = 15-3/16” (5/16” dia.) Extreme all-weather flexibility. Lightweight and coils easily. Adjusts to 3-positions vertically & has
Weight: 26.5 lbs NO MEMORY - lays flat! Abrasion resistant. Won’t kink 3-settings for various wheel depths, up
to 9-1/2” wide.
#APP-615 under pressure! Crush resistant, 3/4” - 11.5GHT fittings Tire Range: 14” to 20”
Max. working pressure at 70° F: 150 psi Drinking water safe!
MSRP $230.92
SPECIAL $189.99
Extension & Cord Management #LEG-HFZG505YW #LEG-HFZG550YW #ALL-647596
#LEG-722-123050FZL5F (5/8” x 5ft) (5/8” x 50ft) MSRP $57.95
(12 ga. x 50ft Extension Cord) #LEG-E8140503 $14.99 $49.99 SPECIAL
Lighted Plug w/ glow-in-the-dark stripe. (14/3 ga. x 50ft Cord Reel) #LEG-HFZG575YW $49.99
Adjustable cord stopper. #LEG-HFZG510YW
MSRP $69.00 (5/8” x 75ft)
Cord locks in 3ft increments. (5/8” x 10ft)
SPECIAL Grounded triple outlet. $69.99
MSRP $165.00 $24.99
$54.99 SPECIAL
$149.99
A / C EQUIPMENT
TM The Most Advanced & User Stops refrigerant leaks in automotive R-134A RECYCLING UNITS SHOP EQUIPMENT
Friendly R134a Digital air conditioning systems,
A/C VACUUM PUMPS Manifold on the Market! quickly & permanently. Simple Operation w/ Superior Accuracy.
• All units recover, recycle, evacuate, &
• Number of Stages: 2 • Large easy to read LCD displays temperature, • Non-polymer, oil-soluble formula is safe for recharge R-134A quickly and accurately.
• Free Air Displacement: 5 CFM pressure, & vacuum readings for R134a. A/C system components and equipment. • All Units Feature: Automatic Air Purge,
• Ultimate Vacuum: 25 Microns • Obtain refrigerant & oil capacity readings for • Compatible with all popular refrigerants Refrigerant Charging, Vacuum Function,
• Motor: 1/3 hp w/ 1725rpm Pump Speed 55 automobile manufactures. systems, including R-1234yf! Refrigerant Management & Multilingual
• Electrical Specs: 110V - 60HZ • Also performs system leak check at the • Seals leaks as large as 0.020 inch (0.5 mm)
conclusion of the evacuation process. • Perfect preventive maintenance aid. Remains Display.
#MAC-90065 in system to help guard against future leaks.
#MAC-99872A #RBA-34788NI
MSRP $591.24 *Not for use in hybrid vehicles
MSRP $283.54 w/ electrically driven compressors* Additional Functions:
SPECIAL • Fully Automatic: lets you recover, vacuum leak
SPECIAL Syringe Injector Kit test, charge, & then walk away.
$439.99 • Vacuum Leak Test
$209.99 Includes prefilled, disposable syringe, hose/ • Automatic Refrigerant Refill
Dual-Voltage coupler with check valve & adapter/purge fitting. • Automatic Oil Drain
A/C MANIFOLDS Services 1 vehicle. Additional Features:
• Number of Stages: 2 • Recovers 20%
• Free Air Displacement: 6 CFM SIDE WHEEL MANIFOLD FOR R134A #TRA-TP2210CS More Refrigerant
• Ultimate Vacuum: 15 Microns SPECIAL • Charge Accuracy
• Motor: 1/3 hp w/ 3440rpm Pump Speed Includes 72” hoses. +/- 1/2 Ounce
• Electrical Specs: 110/220V - 50/60HZ $39.99 • Additional storage areas
#RBA-45111 for tools, extra filter, and
#MAC-90066-2v-110 2oz Big EZ™ Cartridge compressor oils
MSRP $185.95
MSRP $398.75 + Prefilled cartridge works w/ BigEZ™, MSRP $5379.95
SPECIAL EZ-Shot™, & most other popular
SPECIAL caulking gun-style injectors. #MAC-69789
$159.99 + Services up to 2 vehicles.
$279.99 Additional Functions:
DUAL MANIFOLD GAUGE SET #TRA-TP2270-0102CS • Fully programmable to allow for either
AIRVAC™ For both R12 & R134A. SPECIAL automatic or manual use
Packaged in a blow molded case Includes: $49.99 • Vacuum Leak Test
• Uses shop air to pull the system • Dual Manifold • Automatic Oil Drain
into vacuum & includes inlet fittings • 72” R-12 & R-134a hoses, Digital Refrigerant Scale • Automatic Air Purge
w/ 1/4” & 1/2” Acme sizes. • High & Low R-134a snap couplers Additional Features
• Free Air Displacement of 1 CFM. • 1” dial thermometer. • Platform Dimension: 9” x 9” (220 lb. Limit) • Recovers 95% of
• Accuracy (+/- 0.5oz.) & Resolution (0.1oz.) Refrigerant
#RBA-34970 #RBA-47150 • Charging & Recovery capabilities. • Charge Accuracy
$79.99 • Power Supply: 9v Battery +/- 1/2 Ounce
MSRP $284.95 *Carrying Case #TIF9031* • Full Tank Alarm
PREMIUM HIGH VACUUM PUMP OIL • Low Refrigerant Alarm
SPECIAL #TIF-9030
• Thermally Stable - resists breaking down due MSRP $5039.61
to heat for a longer period of time. $239.99 MSRP $210.95
• Lower Moisture Content - helps to improve #MAC-69789-H
the ability to reach a deep vacuum. Deluxe Dual Aluminum SPECIAL
A/C Manifold Gauge Set Additional Functions:
#13119 (pint) $179.99 • Works on both Hybrid and R134a vehicles
$4.99 • R12/R134a Gauges w/ guards, • Fully programmable to allow for either auto-
#13203-1 (quart) • (3) 96” Hoses, Manual Couplers, Electronic Refrigerant matic or manual use
$9.99 • 1/4” SAE x1/2” ACME F Adapter Charging Scales • Vacuum Leak Test
• Automatic Oil Drain
Electronic Leak Detector #MAC-293996-PB-CL ACCU-CHARGE II • Automatic Air Purge
Additional Features
• For all CFC, HCFC & HFC Refrigerants. MSRP $124.55 • Platform Dimension: 9” x 9” (240 lb. Capacity) • Recovers 95% of
• Uses Corona Discharge Technology. • Operating Temp: 32 to 120°F. Refrigerant
• Audible & Visual Leak detector. SPECIAL • Accuracy (+/- 0.16oz.) • Charge Accuracy
• Resolution (0.02lb) +/- 1/2 Ounce
#RBA-16600 $99.99 • Full Tank Alarm
#MAC-98210A • Low Refrigerant Alarm
MSRP $260.95 R-1234yf
A/C Manifold Gauge Set MSRP $291.18 MSRP $5355.78
SPECIAL
• Highly visible 3-1/8” Gauges (Bar/PSI) SPECIAL Please Call For
$219.99 • (3) 71” Nylon Barrier Hoses
+ Red & Blue = 12mm-M fitting on both sides $199.99 Special Prices On Units!
LEAK DETECTORS + Yellow = 12mm-M & 1/2”-16 ACME LH
Features: Couplers w/ extended disconnect 220 lb Economy Scale Universal R12/R134a
Both Units Detect ALL Refrigerants, protection sleeve, & piston-type free floating #MAC-298210-CL
& Leaks as small as 1/10oz Per Year valves reduce o-ring wear. Master Valve Core Service Kit
MSRP $191.62
2-in-1 Electronic / UV Leak Detector #MAC-83272 Service valve cores w/out losing the systems
SPECIAL charge. Covers ALL R12 & R134a system valve
• (6) Levels of Sensitivity MSRP $244.88 cores for Standard, JRA, Eaton,
& (15) Detection Levels $154.99 & GM Large Bore.
SPECIAL
#MAC-55200 THERMOMETERS #MAC-58490
$199.99 #RBA-10945
MSRP $344.77 MSRP $220.99
CONDENSER FIN COMB - Dial; 0° F to 220° F
SPECIAL $249.99 SPECIAL
• Cleans & Straightens $14.99
COOLRITE Economy Detector condenser & evaporator fins. $179.99
• 6-sided head for: 8,9,10,12, #RBA43240
• (3) Levels of Sensitivity 14,& 15 fins per inch. A/C SYETEM FLUSH KIT
• (5) Levels of Detection - Digital Display;
#RBA-18403 -40° F to 390° F / -40° C to 200° C • Designed to work w/ any light weight flushing
#MAC-55100-R-CL $19.99 - Battery Saver w/ Auto Shut-Off agent which can be mixed w/ pressurized air.
• Remove refrigerant oil debris during retrofitting
MSRP $191.62 $29.99 or compressor replacement.
• Includes flush gun, hose,
SPECIAL $154.99 canister, & canister adapter.
#MAC-91046A
SPECIAL
$59.99
HAND TOOLS CUTTING PLIERS TONGUE & GROOVE PLIERS TM
#CNL-424 (4½”) MSRP $19.51 $15.99
High Leverage #CNL-426 (6½”) MSRP $16.86 $13.99 WIRING TOOLS
#CNL-337 (7”) #CNL-420 (9½”) MSRP $20.34 $16.99 #CNL-908
#CNL-430 (10”) MSRP $21.16 $17.99 $19.99
$19.99 #CNL-440 (12”) MSRP $24.01 $19.99
#CNL-460 (16”) MSRP $39.87 $32.99
#CNL-338 (8”) #CNL-480 (20”) MSRP $78.07 $64.99
$22.99
LONG REACH CRIMPING AND CUTTING TOOL Stripper & Cutter w/ Ergonomic Handle
Box Joint #CNL-957
#CNL-436 (6”) FLUSH CUTTING PLIERS #CNL-909
$19.99
$21.99 Cuts plastic & 10-20 AWG copper wire cleanly. MSRP $30.36
#CNL-437 (7”) Stripper & Cutter
$22.99 #CNL-758 (7½”) SPECIAL $24.99 #CNL-958
End Cutting MSRP $37.56 $14.99
#CNL-357 (7½”)
SPECIAL
$24.99
#CNL-358 (8”) $34.99
$29.99
FENCE TOOL CURVED DIAGONAL Cutter, Crimper, & Stripper
Cable Cutting #CNL-959
#CNL-911 (9½”) • Wire Stretcher, Splicer, & (2) Cutters. CUTTING PLIERS
• Staple Starter & Puller. $24.99
$29.99 • Hammer on Jaw. Forged Convex Head allows the user to rock
objects. NEW knife & anvil style cutting edge, Coax Cable Tool
8” LONG REACH PLIERS #CNL-85 ensures perfect mating, resulting in a clean cut #CNL-919
every time.
Designed for long reach applications MSRP $40.89 $29.99
& hard to reach spaces. #CNL-447 (7¾”)
SPECIAL
#CNL-718 (Flat Nose) MSRP $32.55
$21.99 $34.99
SPECIAL
#CNL-748 (End Cutter) WELDERS PLIERS
$27.99 $26.99 7pc NUTDRIVER SETS
• Grove nose for superior spatter removal.
LONG NOSE PLIERS • Grips & Draws out wire. High Leverage High torque, 3 sided grip. Laser etched steel
#CNL-317 (8") • Spring Loaded. #CNL-449 (9½”) cap for easy identification.
#CNL-326 (6")
$24.99 #CNL-360 MSRP $37.00 #CNL-MD7CB #CNL-ND7CB
#CNL-318 MSRP $35.13 SPECIAL (MM: 5mm to 11mm) (SAE: 3/16” to 1/2”)
- 8.4” HD Side Cutter, SPECIAL $29.99 MSRP $53.54
w/ Useful Crushing Area
$29.99 SPECIAL YOUR
$29.99
Adjustable Wrenches SLIP-JOINT PLIERS CHOICE
NUTBUSTER PLIERS w/ 20% Greater Jaw Capacity
Designed w/ Wire Cutting Shear & PermaLock® $44.99
Parrot Nose is ideal for round surfaces. Comfortable Synthetic Rubber Code Blue® fastener that eliminates nut and bolt failure.
SAFE-T-STOP™ helps prevent finger pinch. grip for convenience & firm handling.
#CNL-516 (6½”)
#CNL-307 (7”) #CNL-806WCB (6")
$18.99 $24.99 * Thin Nose
#CNL-410 (9½”) #CNL-808WCB (8")
$19.99 $29.99 $18.99
#CNL-414 (14”) #CNL-810WCB (10")
$34.99 $34.99 #CNL-526 (6½”)
#CNL-812WCB (12") #CNL-528 (8”)
RETAINING RING PLIERS $39.99
$12.99
(5) pairs of color coded interchangeable tips. ADJUSTABLE OIL FILTER PLIERS
Changes from Internal to External #CNL-537 (7”) 7pc SCREWDRIVER SET
w/ a switch of a tab. • Right angle teeth grip in all directions.
• PermaLock® fastener eliminates nut & bolt * Fine Side Cutter Features High Torque 3 sided grip, Go Thru
#CNL-929 (10”) failure. Steel Blade and Magnetic Tips.
$34.99 Slotted - (3/16” & 1/4” x 4”), (1/4” x 6”), &
External: 1-1/2” to 4” #CNL-209 (9") (3/8” x 8”).
Internal: 1-13/16” to 4” #CNL-548 (8”) Phillips - #1 (3/16” x 4”), #2 (1/4” x 4”), &
- 4 adjustments, #3 (3/8” x 8”)
$59.99 - Fits filters up to 3½". $19.99
#CNL-927 (8”) #CNL-SD7CB
$19.99 High Leverage Linesmen’s
External: 1/4” to 2” #CNL-212 (12") MSRP $37.26
Internal: 3/8” to 2” Moving the rivet closer means less force
- 5 adjustment, required for cutting. Laser heat-treated cutting SPECIAL
$34.99 - Fits Filters up to 4¼". edges last longer. And the NEW knife & anvil
#CNL-926 (6”) $29.99
$24.99 style cutting edge ensures perfect mating,
External: 1/8” to 1” #CNL-215 (15") resulting in a clean cut every time.
Internal: 1/4” to 1”
- 6 adjustments, #CNL-367 (7½”)
$29.99 - Fits Filters up to 5½". #CNL-368 (8½”)
$29.99 MSRP $35.69
SPECIAL
YOUR CHOICE
$29.99
Simply Cuts Easier
Average Pounds to Cut = 60 lbs!
- Competitors can take up to 124 lbs,
resulting in 106% additional force.
#CNL-3610 (10½”)
MSRP $37.36
SPECIAL
$29.99
Xtreme Leverage Technology (XLT™) - A DIFFERENCE YOU CAN FEEL FROM THE FIRST CUT!
Positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs.
LOCKING C-CLAMPS w/ SWIVEL PADS #VSG-24R (24") PLIERS & CLAMPS HAND TOOLS
#VSG-24SP (24") MSRP $51.85 $39.99 #VSG-18R (18")
#VSG-18SP (18") MSRP $41.52 $34.99 #VSG-11R (11") LOCKING C-CLAMPS
TM #VSG-11SP (11") MSRP $29.68 $24.99 #VSG-9DR (9") MSRP $49.78 $39.99
#VSG-9SP (9") MSRP $23.06 $19.99 #VSG-6R (6") MSRP $40.40 $34.99
#VSG-6SP (6") MSRP $18.41 $14.99 MSRP $27.58 $24.99
MSRP $21.92 $19.99
MSRP $16.35 $14.99
8" LOCKING SHEET METAL TOOL LARGE LOCKING C-CLAMP CURVED JAW LOCKING PLIERS LONG NOSE LOCKING
#VSG-8R #VSG-10CR (10") PLIERS & WIRE CUTTER
• Allows to tightly clamp around objects of up #VSG-7CR (7")
SPECIAL to 10" wide depending on jaw opening. #VSG-9LN (9")
• Jaw opens 7½". SPECIAL SPECIAL $18.99
$24.99 #VSG-6LN (6")
#VSG-18DR YOUR CHOICE $14.99 SPECIAL $14.99
#VSG-4LN (4")
MSRP $45.25 STRAIGHT JAW LOCKING PLIERS SPECIAL $13.99
#VSG-10R (10")
SPECIAL #VSG-7R (7") CURVED JAW LOCKING
PLIERS & WIRE CUTTER
$39.99 SPECIAL #VSG-10WR (10")
SPECIAL $14.99
5pc WELDERS CLAMP SET 9" LOCKING WELDING CLAMP YOUR CHOICE $14.99 #VSG-7WR (7")
SPECIAL $13.99
Contains the Following: #VSG-9R LARGE JAW LOCKING PLIER #VSG-5WR (5")
Locking C-Clamps SPECIAL $12.99
MSRP $30.83 Great for “stuck” oil filters. #VSG-4WR (4")
+ (2) 11R SPECIAL $11.99
+ (2) 6R SPECIAL #VSG-12LC
Straight Jaw Pliers SPECIAL $24.99
+ (1) 10R $24.99
#VSG-74
MSRP $102.98
SPECIAL
$79.99
5pc LOCKING PLIERS SET LOCKING CHAIN CLAMP
Packaged in a Roll-up Canvas Bag Overall Length of Chain = 18"
Contains: 10R, 10CR, 7WR, 6LN & 5CR.
#VSG-20R
#VSG-68
MSRP $39.13
MSRP $88.42
SPECIAL
SPECIAL
$34.99
$69.99
Replacement Chain
VSG#20REP
HEAVY-DUTY C-CLAMPS FLEXIBLE HOSE CLAMP PLIERS Locking Flexible Hose 3pc. Hose Gripper Pliers Set
• Malleable steel w/ a durable black enamel finish • Precision clamp on end of flexible cable allows Clamp Pliers Includes 5/16", 1/2", & 3/4" hose gripper.
Overall Length = 11”
• Chrome plated spindle & handle. for extended reach, in order to remove plastic • 24” flexible cable for hard to reach areas.
• Extended clamp allows superior extension. #SUN-3703
and/or metal self tightening hose clamps. • Locking mechanism allows for hands free use.
MSRP $54.99
#TIT-51573 (4”) *Replacement Cables Available #SUN-3720
AST#9409A-03 SPECIAL
MSRP $87.99
$7.99 #AST-9409 $39.99
#TIT-51574 (5”) SPECIAL
MSRP $53.65
$9.99 $59.99
#TIT-51575 (6”) SPECIAL
$49.99
$14.99
2pc LOCKING HOSE CLAMPS HOSE CLAMP PLIERS HOSE CLAMP PLIER SET 2pc FUEL LINE CLAMP SET
Includes: • Unique Jaw design fits clamps up to 2” (51mm) • Includes Cross-Slotted Jaw Pliers and a Wide, • Stop flow from vacuum, brake, and fuel lines.
• MVA7605 = 6” OAL, works up to 1” dia. • Extra-heavy duty 5/64” (2mm) cable Flat-Band Hose Clamp Pliers. • Pinch and hold hose w/out damage.
• MVA7607 = 8” OAL, works up to 1-¼” dia. • Bi-material grips with snap feature • The clamps are held open with a ratchet
• Equip w/ angled jaws for accessibility. locking mechanism. Jaws swivel to access hose #OTC-4506
• Applies up to 50 lbs of force. #MAY-28680 clamps in any position.
$9.99
#MTY-MVA7609 MSRP $106.27 #OTC-4502
SPECIAL SPECIAL $29.99
$24.99 $79.99
SPECIALTY PLIERS & WRENCHES
HAND TOOLS TRANSMISSION LINKAGE BRAKE SPRING PLIERS 12pc FIXED TIP
BUSHING INSTALLER New Design w/ longer stronger tips, offering SNAP RING PLIERS SET TM
more control without leaving deep cutting marks.
Easily and safely push tough nylon bushings Easily converts from external to internal. PUSH PIN PLIERS
into place. Works on different bushing sizes. #IMC-989 Packaged in blow molded case.
#IMC-909 MSRP $43.56 #CAL-1016
MSRP $45.38 SPECIAL MSRP $248.45
SPECIAL $29.99 SPECIAL
$129.99
$34.99 For Easy Removal of Plastic Push Pin Type
Panel Fasteners w/ Center Pins.
• Pointed tips will not damage pin or anchor.
SNAP RING PLIER SETS • OAL of 7-1/2".
Convertible Retaining Ring Pliers Sets
#AST-9401 (8pc) #AST-9402 Tip Sizes: .038", .047", .070", & .090" #LIS-41250
• Removes internal and (2pc Large) #SKT-7600 (6pc) #SKT-7612 (12pc) SPECIAL
external snap rings. MSRP $55.40 (Sizes 0° & 90° ) (Sizes 0°, 45° & 90° )
MSRP $36.40
SPECIAL SPECIAL SPECIAL $19.99
SPECIAL
$44.99 $134.99 $279.99 PIVOT FORCE
$29.99
8” Cutting Compound Action Pliers
Requires 40% Less Effort To Cut!
• Professional Easy-Clean Dipped Grips
• Anti-Rust Coating
• Induction Hardened Cutting Edge for Long Life
4pc 7" Fixed Tip Internal & External Safety Wire Twisting Plier FULL LINE OF PLIERS! #KDT-82120 (Diagonal)
#KDT-82121 (Lose Nose)
Snap Ring Pliers Set Automatic action twist safety wire to DIAGONAL CUTTING PLIERS SPECIAL YOUR CHOICE
remove slack. Prevents damage to wire #IMP-03-MPD (5")
• Tapered Jaw Design Allows Increased Reach and & prevents loosening. A MUST for nuts $24.99
Access and bolts in critical & high vibration $3.99
• Tapered Tip Design for Improved Snap Ring Retention areas. #IMP-03-DP8C (7.5")
• Professional Easy-Clean Dipped Grips
Comes w/ (2) straight & (2) 90° #IMP-03-SWP9 $4.99
#KDT-82150 $24.99
MSRP $104.48 10" GROOVE JOINT PLIER
#IMP-03-GJ10
SPECIAL
$7.99
$84.99
PIPE WRENCHES 8pc MINIATURE 6" & 8" LONG NOSE PLIERS Flex-Head O2 Sensor Wrench
IGNITION WRENCH SETS #IMP-03-LN6 (6")
STEEL • Designed for all oxygen sensors with 7/8”. hex.
#IMP-02-PW8H (8") 15° x 60° head openings. $3.99 • Essential clearance for removal/installation of
#IMP-03-LN8 (8") oxygen sensors when it is positioned upward
$4.99 #VIM-VM50 $4.99 and inward to the floorboard or when leverage is
#IMP-02-PW10H (10") needed around an exhaust pipe.
$9.99 (4mm to 9mm) 6” & 8" SLIP JOINT PLIERS
#IMP-02-PW12H (12") #IMP-03-SJ6 (6") #CAL-843
$39.99 #VIM-V18
#IMP-02-PW14H (14") $3.99 MSRP $37.41
$39.99 (V1 to V8”) #IMP-03-SJ8 (8")
#IMP-02-PW18H (18") $4.99 SPECIAL
$69.99 SPECIAL
#IMP-02-PW24H (24") YOUR CHOICE 4pc SNAP RING PLIER SET $29.99
$89.99 #IMP-03-SRP46
#IMP-02-PW36H (36") $29.99 Ratcheting Chain Wrench
$189.99 $19.99 #OTC-6968 (12” Handle)
16” Adjustable Spud Wrench
ALUMINIUM Variable Pin Spanner Wrench Grip Range ½”-4½” O.D.
#TIT-21334 (14”) • Chrome Vanadium construction.
• Black oxide finish resists corrosion. • Universal Design, adjustable from 1-1/4”- 5”. $44.99
$16.99 • Opens to a maximum of 1-1/2". • Works w/ a 1/2” drive ratchet or breaker bar. #OTC-6969 (24” Handle)
#TIT-21338 (18”) • Comes w/ 3.5mm, 4mm, 4.5mm, 5mm, 6mm,
$23.99 #TIT-216 7mm, & 10mm pins. Grip Range 3”-6½” O.D.
#TIT-21344 (24”)
$39.99 MSRP $38.23 #OTC-6613 $89.99
#TIT-21346 (36”) $89.99
$74.99 SPECIAL Adjustable Gland Nut Wrenches
#TIT-21348 (48”) Pin Spanner Set #CTA-8600
$144.99 $34.99
• Includes (4) pairs of interchangeable 2-sided • Fits hydraulic cylinders on vehicles
ADJUSTABLE WRENCHES pins, providing (8) different sizes. from 1” to 3-3/4” / 25mm to 95mm.
• Thumb-Screw Design, expands range from • Reverses to work on 1/4” or 7/32” pinholes.
#IMP-02-AW6 (6") $4.99 25/32” to 3-15/16”(2-10cm). • 1/2” drive.
#IMP-02-AW8 (8") $5.99 • OAL: 9-3/4” (25cm)
SPECIAL
#IMP-02-AW10 (10") $7.99 #CTA-8120
#IMP-02-AW12 (12") $9.99 $29.99
#IMP-02-AW15 (15") $19.99 MSRP $125.00
#IMP-02-AW18 (18") $29.99 #CTA-8605
#IMP-02-AW24 (24") $54.99 SPECIAL
• Fits hydraulic cylinders on vehicles
$99.99 from 2” to 6” / 51mm to 152mm.
• Reverses to work on 17/64” or 21/64” pinholes.
• 3/4” drive.
SPECIAL
$49.99
WRENCHES
TM WRENCH SETS COMBINATION WRENCH SETS 14pc SAE ANGLE HEAD HAND TOOLS
Individual GearWrench® All Wrench Sets packaged in either • Heat treated alloy steel, highly polished chrome plated, WRENCH SET
Ratcheting Wrenches a Plastic Case or Nylon Pouch. & w/ a lifetime guarantee.
• 14pc SAE: 3/8" to 1 1/4" Sizes: 3/8" to 1-1/4"
Complete your Sets w/ the Full Line of Sizes. STUBBY • 15pc MM: 6mm to 24mm
#IMC-710 (10pc SAE) #IMP-01-AW14
“The Original” #IMP-01-W14W (SAE) SPECIAL
• Sizes 7/16" to 1" #IMP-01-W15MW (MM)
SAE Size Range = 1/4” to 1-1/4” $49.99
METRIC Size Range = 6mm to 34mm #8910 (10pc Metric) MSRP $64.99
• Sizes 10mm to 19mm SPECIAL
MSRP $43.71 $54.99
SPECIAL 6pc JUMBO WRENCH SET 6pc JUMBO ANGLE HEAD
YOUR CHOICE OPEN END WRENCH SET
• These JUMBO wrenches have raised panels
$29.99 and are ideal for working on trucks. Sizes: 1-3/8" to 2"
• Sizes: 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", &
PLUS MORE STYLES SUPER THIN WRENCHES 2". #IMP-01-AWJ6
#IMC-8109 (9pc Metric) SPECIAL
XL Combination #IMP-01-WJ6 $89.99
• Sizes 8mm to 32mm
SPECIAL
$39.99
$99.99
#IMC-8308 (8pc SAE)
Stubby & Stubby-Flex
• Sizes 3/8" to 1-5/16")
Reversible & Flex-Head
$49.99
XL Locking Flex/ XL X-Beam/ XL GearBox
XL Spline E-Torx 7pc JUMBO WRENCH SETS METRIC WRENCH SETS
QuadBox™ Double Box • High density, dropped forged alloy steel. • High density, dropped forged alloy steel.
• Comes w/ sturdy metal clip for storage. • Includes Canvas pouch.
Half-Moon S-Shape • #9605M Sizes: 20mm to 24mm
#SUN-9707 (SAE) • #9606M Sizes: 25,26,27,29,30, & 32mm.
COMBINATION WRENCHES SERVICE WRENCHES
#IMC-9215 (15pc SAE) - Sizes: 1-5/16” to 2”. #SUN-9605M (5pc)
Raised panel forged alloy steel. $34.99
Understanding the Part Numbers • Sizes 3/4" to1-5/8" OR
#SUN-9606M (6pc)
For Example: 01-IW11316J #IMC-9515 (15pc Metric) #SUN-9707M (MM) $64.99
• IW = Individual Wrench
• 11316 = the size 1-13/16” • Sizes 20-30mm, & 34-36mm - Sizes: 33, 34, 36, 38, 5pc HALF MOON WRENCH SETS
41, 46, & 50mm.
* metric example IW12M (12MM) MSRP $195.96 • Fully polished drop forged alloy steel,
• J = Jumbo (anything over 1” size). SPECIAL • Includes Canvas pouch.
SPECIAL
METRIC SIZES $149.99 #SUN-9935 (SAE)
YOUR CHOICE
#IMP-01-IW6M (6MM) $1.00 JUMBO ANGLE HEAD - Sizes: 5/16" to 7/8"
$144.99
UP TO METRIC WRENCH SET #SUN-9935M (MM)
#IMP-01-IW25M (25MM) $6.99 ANGLEHEAD WRENCHES • Fully polished w/ 15° & 60° angled ends. - Sizes: 8mm to 22mm
#IMC-214 (14pc SAE) • #9926 Sizes: 20mm to 25mm
SAE SIZES (1/4”) $2.00 • #9627 Sizes: 26mm & 32mm. SPECIAL
#IMP-01-IW14 • Sizes 3/8" to 1-1/4"
#SUN-9926 (6pc) $34.99
UP TO $79.99
$54.99 V-GROOVE WRENCH SETS
#IMP-01-IW212J (2-1/2") $64.99 #IMC-9810 (10pc SAE) #SUN-9927 (7pc)
• Fully polished drop forged alloy steel,
• Sizes 1-5/16" to 2" $89.99 • Includes Canvas pouch.
* 15° & 60° 6pc JUMBO ANGLE HEAD #SUN-9915 (SAE)
MSRP $399.71 SAE WRENCH SET Sizes (14pc): 3/8” to 1-1/4”.
SPECIAL • Fully polished w/ 15° & 60° angled ends. $84.99
• Sizes: 1-3/8,1-1/2,1-5/8,1-3/4,1-7/8, & 2”. #SUN-9917M (MM)
CROWSFOOT WRENCH SETS $259.99 • Includes Canvas pouch.
#IMC-816 (16pc Metric) Sizes (12pc): 8mm to 19mm
3/8” Drive #SUN-9916
#IMC-7412 (12 pc. Metric) • Sizes 8mm to 23mm $49.99
MSRP $204.99
• Sizes 8mm - 19mm $84.99 14pc ANGLE HEAD WRENCH SETS
#IMC-819 (9pc Metric) SPECIAL
#IMC-7711 (11 pc. SAE) • Fully polished w/ 15° & 60° angled ends.
• Sizes 24mm to 32mm $149.99 • Includes Canvas pouch.
• Sizes 3/8" - 1"
$99.99 14pc WRENCH SETS #SUN-9914 (SAE)
MSRP $52.13
• Fully polished drop forged alloy steel. - Sizes: 3/8” to 1-1/4”.
SPECIAL YOUR CHOICE • Includes Canvas pouch.
$84.99
$39.99 #SUN-9714 (SAE) #SUN-9914M (MM)
1/2” Drive STANDRAD WRENCH SETS - Sizes: 3/8” to 1-1/4”. - Sizes: 6mm to 19mm
#IMC-7814 (14pc SAE) #IMC-9017
$69.99 $64.99
• Sizes 1-1/16” - 2” • 17pc SAE Sizes: 1/4” to 1-1/4”
MSRP $149.65 #SUN-9715 (MM) Flare Nut Crowsfoot Sets
$69.99
SPECIAL - Sizes: 6mm to 19mm. • Fully polished drop forged alloy steel
#IMC-9317 • Mounted on a convenient storage rail
$99.99 $49.99
• 17pc Metric Sizes: 8mm to 24mm #SUN-9708 (SAE)
#IMC-7917 (17pc Metric) METRIC CROWSFOOT SETS
$54.99 - Sizes (8pc): 3/8” to 7/8”.
• Sizes 20-30,32,35,36,38,41,42, & 46mm • Fully polished drop forged alloy steel
MSRP $173.02 SAE CROWSFOOT SETS • Mounted on a convenient storage rail. $29.99
#SUN-9710M (MM)
SPECIAL • Fully polished drop forged alloy steel #SUN-9730
• Reusable Blow Mold Storage Tray. - Sizes (10pc): 10mm to 19mm
$129.99 • #9720 Sizes: 1” to 1-3/8”. 24mm-30mm & 32mm
• #9722 Sizes: 1-5/8” to 2-1/4”. $39.99
INDIVIDUAL SIZES $64.99
ALSO AVAILABLE! #SUN-9720
$69.99 #SUN-9740
#SUN-9722 34-36, 38, 41, 42, & 46mm
$99.99
$89.99
DRILL BITS & EXTRACTORS
HAND TOOLS DRILL DOCTOR: THE WOLRDS BEST DRILL BIT SHARPENERS!
• The Drill Doctor Series sharpens w/ Precision, Accuracy, & Durability the largest range & most popular sizes of dull or broken bits.
#DAR-DD350X • Works on high-speed steel, carbide, cobalt, tin-coated, & masonry drill bits.
#DAR-DD500X #DAR-DD750X
+ Range = 3/32” to 1/2” Bits + Range = 3/32” to 1/2” Bits + Range = 3/32” to 3/4” Bits TM
+ Works on 118° point + Works on 118° & 135° point + Works on ANY Angle
MSRP $86.00 MSRP $160.00 from 115° & 140° point. 5pc Screw
MSRP $200.00 Extractor Sets
SPECIAL SPECIAL
SPECIAL #1-5 spiral & straight flute screw
$69.99 $139.99 extractors.
$164.99 Use for removing broken screws,
pipes, bolts, & studs.
FORD TRITON SPARK PLUG REPAIR KITS Stud Remover & Installer 115pc MASTER HSS DRILL BIT SET
#CTR-73415 (SPIRAL)
Insert Installer • Fits hard-to-reach areas. Drill Bits A-Z, #1 to #60, & 1/16"-1/2" by 64ths #CTR-73215 (STRAIGHT)
• Range: 1/4” to 3/4” / 6-19mm SPECIAL
Repairs Ford Modular Cylinders Heads. • Use w/ 1/2” drive tools. #IMP-21-DS115 YOUR CHOICE
Works w/ Ford Triton Motors (’96 to ‘03). $14.99
#CTA-9011 $84.99
#CAL-38900 10pc SPIRAL FLUTE
MSRP $29.95 29pc HSS DRILL BIT SETS EXTRACTOR & BIT SET
MSRP $567.97
SPECIAL $24.99 Include sizes 1/16” to 1/2” by 64th. 5 LEFT-HAND Cobalt Drill Bits, 5/64”
SPECIAL to 19/64”
GRIPS When Others CAN’T! #IMP-21-DS29 5 Fluted Screw Extractors,
$349.99 #IMP-21-DS29R sizes EX-1 thru EX-5
Loosen or Tighten Pipe Fittings in Tight Spots.
Spark Plug Extractor Eliminate the damage to threads, walls, and (3/8" Reduced Shank) #HAN-11119
highly polished nickel or chrome finishes. SPECIAL
Extracts frozen & broken off spark plug sleeves in Ford Sizes 3/8",1/2",3/4", & 1". $29.99 $49.99
Triton Engines (‘04 to ‘08). #IMP-21-DS29T
#WED-200AK 10pc Reverse Drill & Screw
#CAL-39100 (Titanium) Extractor Set
SPECIAL
MSRP $86.93 $34.99 (5) Reverse Drill Bits,
$49.99 + 5/64, 7/64, 5/32, 1/4, & 19/64.
SPECIAL WEDGE-PRUF 5pc Left Hand Drill Bit Set (5) Screw Extractors,
+ #1 - 5.
$59.99 REMOVE BROKEN PARTS Industrial, polished finish, 135° split point.
“Stubby” mechanics length #TIT-16013
Porcelain Extractor w/out BREAKS OR JAMS for added strength.
Premium, cobalt steel. MSRP $24.99
Extract the broken porcelain from the sleeve w/out risk of Easy removal of broken studs, bolts & screws.
material falling into the engine. Works on spark plugs in #CTR-74105 SPECIAL
Ford Triton Engines (’03 to ‘08). #WED-10010
MSRP $62.81 $19.99
#CAL-39200 (10 sizes 1/8” to 13/32”)
SPECIAL 35pc Screw Extractor
MSRP $26.87 $29.99 & Drill Bit Set
#WED-10225 $34.99
SPECIAL Spiral & multi-spline extractors.
(25 sizes 1/8” to 7/8”) 10pc 1/8” Stubby Body Panel Left hand cobalt bits loosen the bolt
$19.99 Double-End Drill Bits while it drills.
$74.99 WEDGE-PRUF
3-Valve Insert Repair Kit 135° point for fast drilling. #HAN-11135
4pc 3/8” Dr. Stud Pullers High Speed Steel.
Repair damaged threads or blowouts in MSRP $253.57
30min or less per cylinder. Use w/ 5.4L & 6.8L Remove broken or worn studs and/or installing #TOO-15210
engines built before 10/9/07, and for new studs w/out damage to the threads. SPECIAL SPECIAL $214.99
4.6L engines built before 11/30/07. Standard Sizes: 5/8", 9/16", & 13/16".
Metric Sizes: 6, 8, 10, & 12mm $4.99 25pc Screw Extractor
#CAL-39300 & Drill Bit Set
#ALL-647081 (SAE) Damaged Screw Remover Set
MSRP $368.81 #ALL-647082 (MM) Extracts screws / bolts, & removes
For Phillips, Slotted, TORX¨ & Robertson. broken fastener w/out breaking or
SPECIAL MSRP $43.59 1/4" hex shank fits drills, sockets, & drivers. jamming.
Sizes #1, #2, & #3 screw removers packaged Use on thread sizes 5mm to 16mm.
$219.99 SPECIAL in a handy storage case.
* Available in 8 pack #AST-9447
Broken Spark Plug Remover $34.99 counter display
Ford Triton 3-Valve Engines MSRP $88.03
6pc Bolt & Stud Extractor Set #TIT-11214
Set Includes a Unique Porcelain Pusher Tool, that SPECIAL SPECIAL $69.99
removes broken spark plugs from 2004 & newer Triton 3 Removes stuck studs, rounded bolts and nuts
valve per cylinder engines. from sizes 1/4" to 9/16" (6mm to 14mm). The $9.99
remover spline cuts into the bolt head or threads
#LIS-65600 for a sure grip. 3pc Step Drill Bit Set
MSRP $109.95 #LIS-19250 #1 - 13 Hole Sizes (1/8” to 1/2”)
#2 - 6 Hole Sizes (3/16” to 1/2”)
SPECIAL $89.99 MSRP $52.75 #3 - 9 Hole Sizes (1/4” to 3/4”)
M14x1.25 SPARK PLUG HOLE REPAIR KIT SPECIAL $39.99 #TIT-16503
Includes drill tap, long & short tap holders, 3/8” Dr. 13pc Bolt Extractor Set MSRP $29.86
insert installer, swedger, and handle.
Plus (3) insert sizes: 5/16", 7/16", & 11/16". Metric & SAE Sizes: 1/4", 5/16"-8mm, 3/8", SPECIAL
10mm, 7/16"-11mm, 12mm, 1/2", 13mm, 9/16"-
#LIS-65000 14mm, 5/8"-16mm, 17mm, 11/16" & 3/4"-19mm. $24.99
MSRP $131.95 #HAN-54113 Rotary Spot Weld Cutter
SPECIAL$119.99 MSRP $153.67 Remove spot welds from sheet metal w/
Double sided 3/8” & 1/4” blade w/ retractable
Sav-A-Thread… SPECIAL point.
Arbor fits all 1/4” Drills
The only thread repair product that can be used to repair $144.99 * Replacement 3pc Double Sided
both taper seat and gasket type spark plug assemblies. Cutting Blades #TOO18025..
Small Fastener Remover
#HEC-5334-14 #TOO-18000
For Use with a Pneumatic Impact Tool to
(M14 x 1.25) Loosen Rusted or Seized Fasteners. $12.99
MSRP $42.20
• A 3/4" open end wrench is used to turn the
SPECIAL socket while impacting the fastener.
• Includes: Phillips #1, #2, #3, #4 & a straight bit.
$34.99
#LIS-60530
MSRP $46.95
SPECIAL $29.99
TAP & DIE, DISCONNECT, MISC.
TM GM Torsion Bar 25-Blade 12” Feeler Gauge Clutch Pilot Bushing Remover HAND TOOLS
40pc TAP & DIE SETS • Holds torsion bar during adjustment. • For Long Reach Applications. Uses hydraulic pressure to remove brass and
#CTR-98900 (SAE) • Services ’88 – ’03 GMC and Chevrolet 1/2-ton, • Sizes Include: .0015, .002, .003, .004, .005, bronze brushings from 1/2” to 3/4” ID.
3/4-ton & 1-ton pickups, S-10 Blazer, S-15 .006, .007, .008, .009, .010, .011, .012, .013, Self-Tapping Tip w/ 2-3 threads.
Sizes 4-40 to 1/2" Jimmy, 4WD pickups w/ 4.3L V6 engine & .014, .015, .016, .017, .018, .019, .020, .021,
MSRP $234.19 ’91 – ’01 Olds Bravada. .025, .027, .030, and .040-inches #LIS-55600
SPECIAL
SPECIAL #CTA-4040 #CTA-A311 $11.99
$139.99 MSRP $99.95 $19.99 COIL SPRING COMPRESSORS
#CAL-512 (Macpherson Struts)
#CTR-98912 (MM) SPECIAL
Quickly compress the coil spring to replace
Sizes 3mm to 12mm $89.99 shock absorber, spring sets, repair bent strut or
MSRP $258.09 strut tube & repair damaged spindle. Instructions
Master Inner Tie-Rod Tool Set 26pc Precision Bit & Driver Set & safety hooks included!
SPECIAL MSRP $71.70
• Includes: 9 crowsfeet to work on many applica- • Features: Color Coded, 1-Click Release,
$139.99 tions on cars & light trucks, w/ sizes: 29mm, 1- Push-Button Eject, & Rotatable Tool Tray. SPECIAL
3/16", 1-1/4", 32.5mm, 1-5/16", 33.6mm, 1-3/8", • Set Includes: (4) Phillips, (2) Pentalobe,
58pc TAP & DIE SETS 1-7/16", and 1-1/2". The inner tie rod can be (5) Slotted, (7) Hex, (6) STAR, plus $39.99
#CTR-98958 (SAE) removed and installed w/out removing the rack. (1) Magnetic bit holder, & (1) Aluminum Bit
Driver #CAL-510
23 taps & 23 dies. #LIS-46800
Sizes 6-32 to 3/4". #TIT-16028 Removes and installs coil springs quickly &
MSRP $480.46 MSRP $149.95 safely. Compress coil springs on all passenger
SPECIAL cars and pick-up trucks. Instructions Included!
SPECIAL SPECIAL MSRP $91.15
$24.99
$259.99 SPECIAL
$129.99
#CTR-98957 (MM) $44.99
9pc Brake Lining Fuel Tank Lock Ring Tool
23 taps & 23 dies. MacPherson
Sizes 3mm to 18mm Thickness Gauges • Remove & install plastic fuel tank lock rings Strut Alignment Level
MSRP $548.20 from 4” to 7-1/4” w/out damage .
Allows Brake Pad Wear to be Accurately and • Channel Design allows legs to adjust to fit a Use to restore a vehicle's camber setting after
SPECIAL $299.99 Consistently Measured without Guessing. wide range of applications and keeps the drive strut repair or installation, which allows vehicle
centered. to be safely driven before a more precise wheel
41pc TUNGSTEN STEEL • Color-coded gauges match SAE or Metric alignment can be performed.
TAP & HEX DIE SETS rec.’s for brake pad replacement. #LIS-63000
• Check both straight on or a 90° angle to the #TOO-61800
#IMP-22-TD41H rotor with offset tips. MSRP $49.95
MSRP $36.95
(SAE: 4-40 to 1/2") #LIS-81850 SPECIAL
SPECIAL
OR MSRP $25.73 $39.99
$29.99
#IMP-22-TD41HM1 SPECIAL 7 PIECE NUTDRIVER SETS
#18-ND7 (SAE) MacPHERSON
(Metric: 3mm to 12mm) $19.99 STRUT SPRING COMPRESSOR
+ 3/16” - 1/2”
SPECIAL A/C & FUEL-LINE Now w/ acme threads & economically priced.
#18-ND7M (MM) Use w/ impact wrench
YOUR CHOICE $44.99 or hand tool ON or
+ 5mm - 12mm OFF the vehicle.
45pc TUNGSTEN LARGE SIZES
TAP & DIE SETS DISCONNECT SETS $7.99 #TOO-63000
#IMP-22-TD45TP-1 #LIS-37000 (6pc) SHAFT IN SEAL PULLER MSRP $49.95
- SIZES1/4" to 1" • Easy to use in confined spaces. Removes cam shaft and crank shaft seals SPECIAL
• Disconnects Spring Lock Couplings. without damage to the shaft.
$134.99 • Sizes: 5/16", 3/8", 1/2", $44.99
5/8", 3/4" & 7/8". #LIS-58430
#IMP-22-TD45MP-1 SPECIAL INNER TIE ROD TOOL
SPECIAL
- SIZES 6 to 24mm $19.99 Removes inner tie rods without touching outer
$9.99 tie rods.
$119.99 Reversible Impact Driver Set works on 1.25” to 2” tie rods with flats and
#LIS-39400 (6pc Angled) smooth tie rods.
53pc Universal Rethreading Kit • Use to loosen and tighten screws, nuts and works with 3/8” drive tool.
• Also Connects Fuel Lines. bolts, w/ special handle to reduce risk of injury
• Includes (2) Thread Files, plus the following: • Sizes: 5/16", 3/8", 1/2",5/8", when striking driver w/ hammer. #AST-78812
TAPS & DIE SETS 3/4" & 7/8". • Has 8 standard & long length SPECIAL
• MM: 6x1, 8x1.25, 8x1.5, 10x1, 10x1.25, 10x1.5, interchangeable bits $11.99
11x1.5, 12x1.25, 12x1.5, 12x1.75, & 14x1.5 SPECIAL
• NC-USS: 1/4”-20, 5/16”-18, 3/8”-16, 7/16”-14, 1/2”- #TOO-14950 15pc Serpentine Belt Tool Set
13, & 9/16”-12 $19.99
• NF-SAE: 1/4”-28, 5/16”-24, 3/8”-24, 7/16”- 20, 1/2”- $29.99 • Provides coverage for all USA and import cars.
20, & 9/16”-18 #LIS-39900 (19pc) • Unlimited access to Serpentine pulley tension
DIES ONLY arms w/ added attachments for better coverage.
• Metric: 6x1.25, 7x1, & 8x1 • Combines both the
• NC-USS: 5/8”-11 above kits, plus #KDT-3680
• NF-SAE: 5/8”-18 specialty disconnects.
MSRP $71.45 MSRP $119.56
#CTA-8240
SPECIAL SPECIAL
MSRP $179.95
$49.99 3/8" DRIVE IMPACT DRIVER SET $94.99
SPECIAL
Thread Restoring Files #IMP-18-ISD38
$154.99 $9.99
• Restores threads on bolts & shafts.
• Files are cross-cut & depth proportional to the CV Joint Puller
thread pitch.
• All are 7/16” square x 8-3/8” long. • Pulls CV Joints w/ hidden retaining rings w/out
damaging the roller bearing inside the joint
#CTA-8231 (Metric) • Use w/ an Axle Puller (5/8”-18).
Sizes: 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, & 3mm #CTA-4245
#CTA-8233 (SAE) MSRP $25.95
Sizes: 11, 12, 13, 14, 16, 18, 20, & 24 TPI SPECIAL
#CTA-8235 (SAE) $21.99
Sizes: 9, 10, 12, 16, 20, 27, 28, & 32 TPI
SPECIAL YOUR CHOICE
$14.99
MISCELLANEOUS
HAND TOOLS 4pc HOOK & PICK SET MINI Tube Bender CAULKING GUNS TM
#IMP-45-CGK
• Comfortable TPR sure-grip handles. • Works w/ brass, copper, steel or aluminum. HOSE REMOVAL TOOL
• Chrome plated shafts. • Bends the following sizes: (Skeleton Body)
• Includes: Curved, 90°, Offset, & Straight. Great for the removal of rubber hoses from
+ 1/8”, 3/16”, & 1/4” O.D. #IMP-45-CGR inlets, outlets & clamps.
#TIT-32976 (6”) Specially designed end makes hose removal
#TIT-51503 (Ratchet Type) easy.
*Available in a 6pc display pack. 8½” overall length with 4”
MSRP $19.76 YOUR CHOICE $4.99 exposed shaft.
SPECIAL
SPECIAL 5lb Magnetic Pickup Tool #TOO-13860
$4.99
$14.99 • Features a powerful magnet w/ shielded sides $5.99
for targeted pick-ups.
#TIT-17223 (10.5”) TUBING BENDER • Telescopes from 6-1/2" to 33"
SPECIAL *Available in 20pc counter display
$14.99 Bends 1/4",5/16" and 3/8"
#TIT-11663
#TIT-17221 (16”) #IMP-45-TB3H $4.99
SPECIAL $14.99
16lb Magnetic Pickup Tool
$59.99 QUICK RELEASE RATCHETS
• Telescopes from 7-3/4” to 30”
Tubing Benders • Shielded sides for targeted pickups • Push Button, Quick-Release Head.
• Comfortable textured cushion grip
Enough leverage to bend • Carded Display w/ Hang Tab FLEX-HEAD
3/16”, 1/4”, or 5/16” steel tubing *Available in 20pc counter display
#TIT-11072 (1/2”)
#IMC-806 (3/16) #TIT-11190 + 24” #TIT-11073 (3/8”)
4pc Seal & O-Ring Remover Set #IMC-808 (1/4) $6.99
#IMC-809 (5/16) SPECIAL + 18”
• Allows for easy removal of seals & o-rings w/ MIGHTY WORM
out damaging the seal or the finished surface. SPECIAL Magnetic Pickup Tool $54.99 SPECIAL
• Set Includes:
YOUR CHOICE • 5mm Magnetic Head $29.99
+ (2) Contoured Tip & (2) Spoon Tip • Flexible 30" Copper Wire
+ Lengths: 5-1/2” & 8-1/2” $34.99 • Pick-up Capacity: 1/2 lb. #TIT-11074 (1/4”)
+ CRV Steel Shaft
#IMC-3826 + 12”
$5.99
SPECIAL
SCREWDRIVER SETS
#TIT-17004 MAGNIFYING GLASS $24.99
6-IN-1 SCREWDRIVER
MSRP $21.93 • 2.2x magnification STANDARD
• TPR rubber grip handle & framing Slot, phillips and nutdriver. #TIT-11085 (1/4”)
SPECIAL • Lens diameter 2-7/8” w/ OAL 7-1/4”. + 12” #TIT-11086 (3/8”)
#IMP-18-SD6N2
$14.99 #TIT-15029 (w/ LED LIGHT) $5.99 SPECIAL + 18”
8pc SCREWDRIVER SET
12pc Precision Pick & $14.99 $24.99 SPECIAL
Assorted slot,
Screwdriver Set #TIT-15038 phillips screwdrivers.. $29.99
• Chrome plated chrome-vanadium steel shafts $9.99 #IMP-18-SD8N #TIT-11087 (1/2”)
w/ Comfortable TPR grips $9.99
• Comes w/ Plastic Tray & Nylon Storage Pouch. STEEL TAPE MEASURES 22pc SCREWDRIVER SET + 24”
• (4) Picks: Straight, 90°, and 1/4" & 1/8" radius. #IMP-26-MT12
• (2) Phillips Screwdrivers: #000 & #00. Assorted slot and Phillips screwdriver, SPECIAL
• (2) Slotted Screwdrivers: 3/32" & 1/8". (½" X 12’) Torx screwdrivers, scratch awl,
• (4) Torx drivers: T5, T7, T8 & T10. screw starter, $49.99
#IMP-26-MT16 stubby screwdrivers
and tack puller; EXTENDABLE
(¾" X 16’) all w/ neon handles.
• Telescopes in 5 Increments
#IMP-18-SD22M
#TIT-17612 YOUR CHOICE $14.99 #TIT-12070 (3/8”)
+ 8-1/2” to 12-1/2” #TIT-12073 (1/2”)
MSRP $36.22 $4.99 Adjustable Water Spray Nozzle
SPECIAL + 18” to 24”
SPECIAL $29.99 Attaches to any garden hose.
Twist action adjustable valve for $24.99 SPECIAL
variable water streams.
LONG REACH HOOK & PICK SET 4pc TAPE MEASURE SET *Available in 6pc Display Pack #TIT-12072 (3/4”) $39.99
+ 19-1/2" to 30-1/4" #TIT-12074 (1/2”)
Stainless steel w/ 9-1/2” overall length. Comes w/ the Following Sizes: 12 ft x 5/8”, 16 #TIT-11091 SPECIAL
ft x 3/4”, 25 ft x 1”, & 33 ft x 1” SPECIAL + 12” to 17-1/2
#TOO-13920 $14.99
#TIT-17504 $99.99 SPECIAL
MSRP $23.45
MSRP $22.16 $34.99
SPECIAL
SPECIAL
$19.99
$14.99
2pc O-Ring & Hook Scribe Set 9pc Flexible Driver & Bit Set Safety Hammer
• Great for scribing metal, picking "O" rings & Chrome vanadium blade w/ magnetic • This Tool will Breaks Glass & Cuts Seatbelts,
parts from hard to reach areas. tip. in order to get you out in an emergency.
• (1) Combination pick and hook pick Ergonomic cushioned handle. • Lightweight handle w/ double-headed hammer
• (1) 90 degree pick and straight pick Set includes:(1) Spring tube (215 mm) and recessed razor.
• Knurled handles for better grip (4) Slotted: 4mm, 5mm, 6mm
(3) Phillips: PH1, PH2, PH3 #CTA-10600
#TIT-17702 (2) Star: T15, T20
SPECIAL
SPECIAL $4.99 #TIT-12227
$9.99
DOOR SPRING TOOL MSRP $12.55
THUMBWHEEL Ratchets
• Quickly remove or install door hinge springs. SPECIAL
• Services GM cars and GM light duty trucks. Great for Tight Spots!
• Use w/ a 1/2" open end or ratcheting box $8.99
wrench. #IMC-61402 (1/4")
#IMC-63802 (3/8")
#TIT-15040
SPECIAL
$9.99
$6.99
TM 6pc Deutsch Terminals TERMINAL, CIRCUIT & WIRE TOOLS HAND TOOLS
Wire Insertion Tool Service Kit Master Terminal Service Kit
Use for Installing Wires on (3) Terminal Release Tools For use on:
Audio Electronics, Aftermarket
#TOO18551 (Use w/ 14-16,gauge: GOLD) Deutsch open and closed barrel terminals
Lighting, & Alarm Systems. #TOO18552 (Use w/ 16-18 gauge: BLUE) Weather Pack terminals
• Includes (2) Wire Insertion #TOO18553 (Use w/ 20-24 gauge: RED) Metri-Pack terminals
Tools w/ 10-1/2” steel tubes: Other open barrel terminals
1/4" O.D. and 3/8" O.D. (1) Open Barrel Crimping Tool
#TOO-18650 #TOO-18700
#LIS-61030 #TOO18600 (Use w/ 14-24 gauge)
MSRP $149.95 MSRP $249.95
MSRP $29.95 (2) Closed Barrel Terminal Crimpers
SPECIAL SPECIAL
SPECIAL #TOO18880 (Use w/ 14, 16, & 18 gauge)
#TOO18890 (Use w/ 20 & 22 gauge) $124.99 $199.99
$24.99
Ratcheting Wire 220pc Interchangeable Ratcheting Ratcheting Terminal Crimping Kit
Terminal Crimper Terminal Crimper & Accessory Set Versatile kit includes (5) dies for virtually all uses.
Quickly interchange for a
• Racheting mechanism design Comprehensive kit for crimping a variety wide range of applications.
• Adjustable crimping compression of Delphi Weather Pack Connectors
• Color coded wire sizes Quick interchange chromoly jaws #TOO-18920
red 22-18AWG-DIN 0.5-1.0mm provide two Weather Pack ratcheting
blue 16-14AWG-DIN 1.5mm-2.5mm pliers in one! MSRP $124.95
yellow 12-10AWG-DIN 4-6mm; grip
#AST-9478 SPECIAL
#TIT-11477
MSRP $166.85 $99.99
SPECIAL
SPECIAL
$19.99
$129.99
4pc Wire Terminal Tool Kit Adjustable Wire Stripper WIRE STRIPPERS WIRE STRIPPER FOR
#TOO-18950 (Self Adjusts) RECESSED AREAS
• Remove wires from terminals w/out damage. • Cuts and strip 12-22 gauge wire
• Work on conventional terminals, Pack-Con and • Automatically adjusts to wire size 10-26 gauge wire. Strips 22-12 gauge single or
Weather-Pack terminals (GM vehicles), plus *Not designed to strip teflon or similar insulations. multiple stranded conductor wire
many Ford applications. $19.99 Automatically adjusts to wire size
• The handle slips over the probes to protect the #TIT-11469 Built in wire cutter
technician's hand as well as to provide extra #TOO-19000
leverage. MSRP $19.99 #TOO-19100
12-22 gauge wire.
#LIS-57750 SPECIAL MSRP $24.95
$24.99
MSRP $60.95 $14.99 SPECIAL
SPECIAL $19.99
$49.99 IN-LINE SPARK CHECKER KIT
FOR RECESSED PLUGS
Deutsch Terminal Tool 12 / 24 / 42v Circuit Tester “CHECK POINT"
CIRCUIT TESTERS Troubleshoots virtually all domestic and import
Works on OEM Electrical Connectors Used on Computer Safe – draws 3 milliamps at 12V cars, SUV's & trucks.
variety of vehicles & equipment. Has 2-LED’s for easy voltage identification: 6 & 12 volt systems.
+ BLUE for 12 & 24v / RED for 42v #TOO-23970
- Kenworth & Peterbuilt Trucks, Harleys. Heavy duty ground clip w/ insulator. #TOO-21000 SPECIAL
- Caterpillar and industrial connecters. $5.99 $19.99
#TOO-28200
#LIS-59600 #TOO-27000 IN-LINE IGNITION
MSRP $24.95 SPARK CHECKERS
MSRP $32.95 (Heavy Duty) #TOO-23900
SPECIAL #TOO-23920
SPECIAL $7.99
$19.99 (w/ 90° Boot)
$24.99
SPECIAL
DELUXE NOID LITE & Wirehawk® CIRCUIT TESTER HEAVY-DUTY CIRCUIT TESTERS YOUR CHOICE
GM AC SIGNAL TEST LIGHTS Captures and pierces wire with unique hook tip w/ 12ft Retractable Wire & Clip $9.99
design & can be used as an “ice-pick” tester.
Checks for systems of GM TBI, Bosch PFI Ground Wire: 44”, 16 gauge, w/ 50 amp clamp. Works on 6 & 12 volt systems.
Ford TBI, GM PFI, Geo TBI and GM SCPI Use for 12V or 24V circuits, connections, fuses Standard 3-1/4” Length Probe
Normal voltage indicated by flashing light, and 2-cycle engine timing.
is visible from passenger compartment #TOO-27300
#THX-121 SPECIAL
#AST-7898 $10.99
$24.99
MSRP $32.73
SPECIAL $24.99
Kit w/ 8 NOID LIGHTS, COIL-ON SPARK TESTER Cordless Circuit Tester DIGITAL CIRCUIT TESTERS
& 2pc IAC TEST LIGHTS Fastest way to test no-start conditions V-tip needle, doesn't require ground wire or clip. w/ BACKLIT LCD DISPLAY
• Gad Meausements =from 0 to 40k Safe w/ ECMs, sensors, transducers, airbags,
Use to test spark plug circuits, electronic fuel • The 12” ground wire, comes w/ shielded clip. etc. • The small & ergonomic design.
injection signals & idle air control circuits. • Needle-sharp stainless steel probe.
#LIS-20700 #AST-7760 • Cable length : 11ft
#TOO-36350 SPECIAL
$19.99 MSRP $16.73 12/24 VOLT
MSRP $75.65 #AST-7763
Computer Safe Circuit Tester SPECIAL SPECIAL
SPECIAL
Safe for automotive computers. $14.99 $24.99
$69.99
#LIS-24550 IN-LINE SPARK TESTER 3-48 VOLT
SPECIAL #AST-7764
$14.99 Gives a visual check SPECIAL
of the ignition system.
$29.99
#LIS-20610
SPECIAL
$14.99
PUNCHES, CHISELS & PRY BARS
HAND TOOLS PILOT PUNCH KITS 4pc Brass Assortment Set Dominator™ Pry Bars
6pc Set • Used for non-marring applications. • Hardened, tempered steel shaft runs from
• Designed to inhibit sparking. cutting edge through the handle.
+ 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, & 5/16” • 1/4” - solid punch. • Capped end is in direct contact w/ the shaft,
• 1/4” & 3/8” - pin punches. allows user to strike w/out damaging the handle.
#MAY-62250 • 3/8” - drift punch. • Ergonomic 2-composite handle.
MSRP $65.18 #MAY-62277 Single Curved Pry Bars TM
#MAY-40138 (36”)
SPECIAL MSRP $48.18 Pry Bars
MSRP $89.04
$54.99 SPECIAL w/ Screwdriver Handles
SPECIAL $69.99
9pc Set $39.99 #MAY-40139 (42”) Offers a more comfortable & secure grip.
+ 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 9pc Brass Pilot-Punch Set MSRP $98.00 #MAY-40111 (12")
3/16”, 7/32”, 1/4”, & 5/16”.
• Will not damage harder materials. SPECIAL $79.99 MSRP $18.58
#MAY-62252 • Non-Sparking, Non-Marring, & Non-Magnetic. #MAY-40160 (48”)
• Includes Sizes: 1/16”, 5/64”, 3/32”, 1/8”,5/32”, SPECIAL $14.99
MSRP $87.71 3/16”, 7/32”, 1/4”, & 5/16”. MSRP $133.58
• Knurled Grip Handle. #MAY-40112 (18")
SPECIAL SPECIAL $114.99
#MAY-61368 #MAY-40162 (58”) MSRP $28.87
$74.99
MSRP $55.87 MSRP $145.18 SPECIAL $24.99
12pc Set
SPECIAL SPECIAL $124.99 #MAY-40109 (24")
+ 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”,
1/4”, 5/16”, 3/8”, 7/16”, & 1/2”. $49.99 Pry Bar Sets MSRP $34.09
#MAY-61355 (3pc)
#MAY-62254 ALL-AROUND SPECIAL $29.99
PUNCH & CHISEL KITS + 7”C, 12”C, & 18”C
MSRP $133.67 #MAY-61005 (6pc) MSRP $90.76 DOMINATOR®
CARBON SCRAPER SETS
SPECIAL PUNCHES: (1) Solid , (2) Pin, & (1) Center SPECIAL $79.99
CHISELS: (2) Cold #MAY-61356 (3pc) Capped-ends allow striking w/out damage.
$114.99 MSRP $49.07
SPECIAL + 18”S, 24”C, & 36”C 4pc 12” OAL Set
MSRP $178.13
$39.99 • Blade Widths: 1/2”, 3/4”,
SPECIAL $139.99 1” & 1-1/2”.
#MAY-60001
SPECIAL
$59.99
5pc LONG PIN PUNCH KIT #MAY-61366 (5pc) 2pc Heavy-Duty Set
Sizes; 1/8”, 3/16”, 1/4”, 5/16”, & 3/8”. + 7”C, 12”C, 18”C, • Blade Widths: 2”& 3”
24”C, & 31”C • OAL: 14.5” & 17”
#MAY-62065 #MAY-61044 (14pc) MSRP $153.80
#MAY-60026
MSRP $56.18 PUNCHES: SPECIAL $119.99 SPECIAL
(2) Solid , (5) Pin, (1) Line-Up, & (1) Center $74.99
SPECIAL $49.99 CHISELS: (5) Cold 4pc DOMINATOR®
MSRP $111.22 4pc O-RING Remover Set
6pc COLD CHISEL KIT Hook & Pick Sets
SPECIAL • For removal of o-rings and seals.
Sizes: 1/4”, 5/16’, 3/8”, 1/2”, 5/8” & 3/4” • Shaft runs from cutting edge through handle. • Rounded tips for easy, damage free removal.
$94.99 • Capped-End, prevents damage to handle. • (2) tip configurations w/ (2) blade lengths.
• Ergonomic 2-composite handle.
#MAY-60560 #MAY-60028
Standard Set (10” OAL) SPECIAL
MSRP $53.87 $24.99
• Contains: Scratch Awl, plus
SPECIAL 90°, Complex, & Curved Hooks. HEAVY-DUTY Seal Puller
$44.99 #MAY-60000 Remove the most stubborn seals w/ this
puller that is finished in black oxide.
#MAY-61050 (24pc) MSRP $62.11
PUNCHES: SPECIAL
(6) Solid , (6) Pin, (1) Prick, & (2) Center
CHISELS: (6) Cold , and (1ea) Cape, $49.99
Half-Round, & Diamond Point
MSRP $197.62 Mini Set (6.5” OAL)
SPECIAL • Contains: Scratch Awl, plus 90°, Complex, &
Curved Hooks.
$144.99
#MAY-60003
MSRP $21.00
SPECIAL
$19.99
Xtra-Long Set (20.5” OAL)
• Contains: Cotter-Pin Puller, plus 90°, Com-
plex, & Curved Hooks.
Punch & Chisel Holder
• Saves your knuckles and prevents accidents.
• Work w/ punches or chisels up to 1” diameter.
• Great for use in tight spaces.
#MAY-50301 #MAY-60027 #MAY-37019
MSRP $36.51 MSRP $114.02 MSRP $25.04
SPECIAL $29.99 SPECIAL SPECIAL $19.99
$84.99
ALL Mayhew Punch & Chisel Sets
are USA Quality Made Tools,
& packaged in durable roll-up pouches.
PUNCHES, HAMMERS & PRY BARS
TM HIGH-QUALITY HAMMERS BRASS DRIFT PUNCHES JIMMY BARS HAND TOOLS
SLEDGE HAMMERS w/ RUBBERIZED GRIPS Manufactured from machined round stocks. #OTC-7166
#TIT-63000 Non-slip knurled handles on some models.
WOOD HANDLE (5/8” diameter, 18" long)
#IMP-05-SH4 (4 lbs) (3lb Sledge) Chamfered ends.
$24.99
SPECIAL $14.99 SPECIAL #WLS-DP112
#OTC-7167
FIBERGLASS HANDLES $19.99 (1" x 12" drift, knurled)
#IMP-05-SH8F (8 lbs) #TIT-63004 (3/4” diameter, 24" long)
$37.99
SPECIAL $39.99 (3lb Cross-Pein) #WLS-32 $29.99
#IMP-05-SH12F (12 lbs)
SPECIAL $49.99 SPECIAL (3/4" x 9" drift, knurled) #OTC-7168
#IMP-05-SH16F (16 lbs)
SPECIAL $59.99 $19.99 $20.99 (7/8” diameter, 30" long)
#TIT-63216 #WLS-38
4 LB. HAMMERS $34.99
#IMP-05-CPH4 (2lb Brass Non-Sparking) (3/4" x 11" drift, knurled)
#OTC-7420
(Cross Pein) SPECIAL $24.99
#WLS-52 (7/8” diameter, 46" long)
#IMP-05-DH4 $44.99
#TIT-63233 (5/8" x 9" drift, knurled) $79.99
(Drilling Hammer)
(2.5lb Stone Hammer) $16.99 #OTC-7421
YOUR #WLS-53
CHOICE SPECIAL (1” diameter, 54" long)
(5/8" x 9" drift, tapered)
$14.99 $19.99 $99.99
$17.99
5pc BALL PEIN HAMMER SET 5pc General Hammer Set #WLS-58 3pc HANDLED PRY BAR SET
• Drop Forged and Heat Treated. • (1) 16 oz. Ball Pein Hammer (5/8" x 11" drift, knurled) Made of tempered square steel that you can hit
• Durable Fiberglass Handles. • (1) 32 oz. Ball Pein Hammer without damaging the handle! Set includes 12",
• Includes: 8oz, 12oz, 16oz, 24oz, & 32oz. • (1) 32 oz. Rubber Mallet $19.99 18", & 24" bar shank lengths.
• (1) 3 lb Cross Pein Hammer
#IMP-04-BH5F • (1) 3 lb Sledge Hammer 2pc BRASS PUNCH SET #OTC-8203
SPECIAL
$29.99 #TIT-63125 Two large brass non-sparking punches ideal for MSRP $70.95
use near precision parts.
DEAD BLOW HAMMERS MSRP $91.00 - 8” punch (5/8” hex, tapered to 3/8”) SPECIAL
#IMP-04-DBH1 - 10” straight punch (3/4” diameter)
(1 lb.) $9.99 SPECIAL $74.99 $64.99
#IMP-04-DBH2 *chamfered ends
(2 lb.) $12.99 32pc TRANFER PUNCH SET
#IMP-04-DBH3 #OTC-4602
(3 lb.) $14.99 • Sizes: 3/32"-1/2" in 1/64” increments, plus a
#IMP-04-DBH4 17/32” punch. SPECIAL
(4 lb.) $19.99 • Made from heat treated & tempered tool steel.
• Length: 4-7/8” (.00025 diameter) $39.99 4 PIECE PRY BAR SETS
BRASS HAMMERS • Comes in a Indexed Stand.
• #PB4 - features screwdriver type handles and
Flame tempered hickory handles. #CEN-3S301B has sizes 8",12",18" & 24".
Non-marring, non-sparking SPECIAL • #PB40 - features heel-end pry bay style and
solid cast heads. $39.99 has sizes 6",12",16" & 20"
#WLS-H20 1/4" STAMP SETS #IMP-09-PB4
#IMP-10-LP14
(20 oz. ballpein) 3pc Brass Drift Punch Set $12.99
(27 piece letter)
$34.99 • For non-marring and non-sparking applications #IMP-09-PB40
#WLS-H56 $19.99 • For aligning unhardened steel or aluminum $14.99
#IMP-10-NP14 • Designed for use on harder surface materials
(3½ lb. single jack) that will not be damaged by the softer brass 16pc Punch & Chisel Set
(9 piece number) punches.
$79.99 • Heat treated drop forged steel
$7.99 #SKT-6323 • Set includes:
MSRP $69.13 - 6pc cold chisels: 1"x10", 7/8"x10", 13/16"x8",
3/4"x8", 5/8"x7", 1/2"x6.5"
SPECIAL
- 4pc punches: 3/8"x10", 3/16"x10", 1/8"x5.75",
$49.99 3/8"x8"
- 2 center punchs: 8", 5.75"
BOLT CUTTERS #AST-1612
#IMP-22-BC14 MSRP $29.99
(14” handle) SPECIAL
$9.99 $24.99
8pc HOLLOW GASKET PUNCH SET #IMP-22-BC18 Industrial Grade
• Punch round holes in paper, fiber, cloth, (18” handle) Hand Held Bolt Cutter
rubber, leather and other gasket materials.
• Includes: seven hole punches (1/4” - 5/8") and $14.99 • New Design features a better ergonomics and
the P69 drive mandrel. requires less cutting force.
• Made from alloy steel & #IMP-22-BC24
heat-treated. > 30% less force than standard bolt cutters
(24” handle) > 50% less force than linesman pliers.
#VIM-P79 • Meets/exceeds Knipex & Bahco force to cut.
$19.99
MSRP $55.71 #HKP-0890MC
#IMP-22-BC36
SPECIAL MSRP $57.96
(36” handle)
$49.99 SPECIAL
$39.99
AUTOMATIC CENTER PUNCH $49.99
#IMP-22-BC42
Overall Length 5 inches.
(42” handle)
#IMP-10-ACP
$44.99
$4.99
TIRE & WHEEL TOOLS
HAND TOOLS BLUE COBRA™ DUAL WHEEL SEPARATOR PROFESSIONAL SUPER TM
Truck Tire Demounting Tool Kit Ideal for removing stuck or frozen SINGLE AXLE DRAIN PAN Inflator, Deflator &
dual steel wheels. Tire Pressure Gauges
In SECONDS this tool will Demounts nearly Securely catches oil & grease (124oz
any 20”, 22.5” & 24.5” tube-type & tubeless truck • Innovative “One-piece” Pusher is ball bearing capacity) w/ self-draining shelves for hub DIGITAL
tires, up to 13” wide wheel. driven & heat treated won’t fall apart during use. & axle nuts. #AST-3018
Includes Leather Wheel Protector; prevents Fits most 10-hole Super Single & Dual
scratches to painted, aluminum, & alloy wheels. • Forcing Screw & Pullers Disc Wheels & allows 2 or 3 hole stud • The 3.5” LCD screen displays
both have 1-1/8” x 11 threads. attachment to wheel using finger- KG, PSI or BAR measurement.
#KEN-35440 • The Kit Includes (2) pullers to tightening lug nuts. • Measuring Range: 3~175psi
cover both large & small applications. MSRP $115.95
MSRP $428.47 #KEN-30600
• Use w/ air impact wrench. SPECIAL
SPECIAL $29.99
#KEN-34549 $89.99
$339.99 #TFL-17879
MSRP $249.96
• Back-lit Digital LCD Display.
SPECIAL • Long, straight-on dual foot chuck
• Air Bleeer Valve for deflating
$199.99 • Measuring Range: 0~200psi
Full Service Kit 4pc Lug Nut Remover TRUCK & TRAILER WHEEL PAN SPECIAL
Includes: Classic Tubeless Tire Iron, Double- Impact Socket Set Catches oil from wheel hubs. $39.99
End Tire Spoon, 8# Bucket Euro Past Lube,
Euro-Style Lube Application Brush, Aluminum C • For removing wheel locks & damaged lug nuts. #LIS-19852 3-1/8” DIAL
-Lok™ Bead Holder, & Leather Wheel Protector. • Patented, internal tapered reverse threads SPECIAL #AST-3081
locks onto damaged nut and easily pulls off $14.99
#KEN-35442 using 1/2” impact wrench. • Measuring Range: 0~180psi
• Sizes: 3/4”, 13/16”, 1”, & 1-1/8”. TIRE / TUBE TEST TANK MSRP $74.20
MSRP $569.99
#KEN-30254 (31” x 12” x 12”) SPECIAL
SPECIAL #LIS-19822
MSRP $59.96 $59.99
$419.99 MSRP $87.95
SPECIAL #TOO-65130
WHEEL ARM™ SET SPECIAL
$49.99 • Measuring Range: 0~160psi
SAVE TIME & SAVE YOUR BACK! $59.99
• Designed to hold the tire at lift arm height, 4pc HD Inner Budd Nut & SPECIAL
providing easy accessibility for the mechanic THE GRABBER
when putting-on or taking-off tire from the Wheel Stud Removal Set $59.99
vehicle. Clamping Valve Core Removal Tool
• Ideal for tire rotations & brake jobs. • Patented, internal tapered reverse threads • Extendable Collet securely clamps onto valve
• Adjustable design - horizontally & vertically so locks onto damaged nut and easily pulls off core, and remains in jaws once unscrewed.
it can be used on lift arms of varying thickness. using impact wrench. • Made of Stainless Steel, & Works on nearly all
• Wheel Stud Sizes: 5/8”, 3/4” Automotive & Industrial Valve Cores!
+ Adjusts by hand from 3” to 5” wide, & tight- • Budd Nut Removers: 1-1/8” Inner Nut Left
ens on the frame w/ a allen wrench. Hand Thread & 1-1/8” Inner Nut Right Hand #AST-9512
• Comes w/ (2) 100lb Capacity Wheel Arms & Thread. SPECIAL
(2) Magnetic Trays, that will hold any loose $9.99
items. #KEN-30649
#OME-92100 MSRP $95.96
SPECIAL SPECIAL
$149.99
$84.99
Pocket Digital Tire Pressure Dual Wheel Lug Stud Remover DIGITAL TIRE TREAD INFLATOR GAUGES
and Auto Emergency Tool • Use w/ a standard 1-1/2” socket or wrench, to DEPTH GAUGE DELUXE
remove the 13/16” flanged square drive inner
• Measure Tire Pressure (PSI, BAR, & KPA) cap nuts, which secure the inside dual wheels • Range 0-1" / 0-25mm Range: 10-120 PSI (2lb steps)
• Emergency Tools: steel window escape on truck and trailers. • .0005" / .01mm graduations Dual-Head Chuck w/ 12” Hose
hammer, & recessed blade to cut through • Self-Tapping Splines, only require
seatbelts. a dead-blow hammer. #TFL-17850
• (2) LED Lights: a bright white light & a red light. SPECIAL
#KEN-30165
#AST-3088 $39.99
MSRP $83.14
SPECIAL FlexZilla® Hose
SPECIAL
$19.99 Straight-On Chuck w/ 12” Hose
$74.99 Range: 20-170 PSI
Digital Tire Pressure FIBERGLASS HANDLED #CEN-3S401 + 2psi Increments.
Inlet: 1/4” FNPT
& Tread Depth Gauge BEAD BREAKER WEDGE MSRP $38.02
#LEG-AL2000FZ
• Proper tire inflation maximizes performance • Overall Length = 32” SPECIAL $34.99 SPECIAL
and fuel economy, which is easy to • Weight = 11 lbs
monitor with the large backlit Tire Compressor $39.99
digital display and comfort #KEN-35429
grip design of this durable gauge. + Pressure: 150psi MAX ECONOMY
MSRP $139.94 + Self-Stored Cable & Hose
#TFL-17557 20" overall length
SPECIAL #AST-7790 Dual head chuck
SPECIAL SPECIAL Range: 20-140 psi
$119.99
$14.99 $24.99 #TIT-19341
SPECIAL
$14.99
SPECIALITY SOCKETS
TM TORX SOCKET SETS 14pc 6" Hex Driver Sets 3pc Impact Socket Adapter Set HAND TOOLS
#VIM-HXLM100 (Metric)
Impact Grade #VIM-HCT1050 (10pc STUBBY) • Includes: 1/4" Dr., 3/8" Dr, 1/2" Dr. adapters.
Extension Reducer • (7) hex & (7) ball-hex: 3mm, 4mm, 5mm, 6mm, • Detent ball for secure socket retention.
1/4” Drive Sizes: T10 - T50 7mm, 8mm, & 10mm
• 1/2” (Female) x 3/8” (Male) MSRP $39.02 #TIT-12082 (2-3/4" OAL)
• Overall Length: 36” #VIM-HXL100 (SAE) SPECIAL
SPECIAL $4.99
#IMC-98036 • (7) hex & (7) ball-hex:
$29.99 $34.99 1/8", 5/32", 3/16", 7/32", #TIT-12086 (6" OAL)
1/4", 5/16", & 3/8" SPECIAL
Triple Square Socket Sets #VIM-V458L-SET (18PC LONG) MSRP $82.36 $9.99
#VIM-XZN100 (8pc)
9 pc 4.5” Long T10 thru T50 SPECIAL #TIT-15206 (12" OAL)
+ 3/8” Drive Stubby 9 pc 8” long T10 thru T50 YOUR CHOICE SPECIAL
+ 4mm thru 16mm. black bits and chrome $24.99
holders. $74.99
SPECIAL MSRP $103.70 3pc Locking Impact
HEX SOCKET SETS Socket Adapter Sets
$34.99 SPECIAL
$94.99 9pc STUBBY SETS • Includes: 1/4" Dr., 3/8" Dr, 1/2" Dr. adapters.
#VIM-XZN400 (9pc) • Detent ball for secure socket retention.
52pc MASTER TORX® SOCKET SET 1/4” square drive, one-piece design. • 1/4" Shank
+ 1/4”, 3/8”, & 1/2” Drive
+ 4mm thru 18mm. • Includes Torx, Torx-Tamper-Resistant, #VIM-SHM400 (Metric) #TIT-15210 (2-3/4" OAL)
& Torx-Plus Bits (14pc each): 1/4"dr T6-T30; SPECIAL
SPECIAL 3/8" dr T40-T55; & 1/2" dr T60 - Sizes: 2mm to 10mm $24.99
• Plus Torx External Sockets (12pc) : 1/4" dr E4-
$59.99 E8; 3/8" dr E10-E20; & 1/2" dr E22-E24. #VIM-SHI400 (SAE) CHROME SOCKET SETS
9pc XZN TRIPLE SQUARE #OTC-5900A - Sizes: 3/32” to 3/8” 22pc 1/4”" DRIVE SOCKET SETS
SOCKET SETS MSRP $33.00 #IMP-12-SK2214 (3/16"-1/2")
MSRP $129.95 #IMP-12-SK2214M (4mm-11mm)
-1/4” dr, 4 & 5mm SPECIAL YOUR
-3/8” dr, 6, 8, & 10mm SPECIAL CHOICE
-1/2” dr, 12, 14, 16, &18mm $29.99
$119.99 $24.99
#TIT-16138 (Stubby Impact) 26pc MASTER SET
#TIT-16144 (Chrome) 47pc 3/8” Dr. SAE & Metric 21pc 3/8" DRIVE SOCKET SETS
SPECIAL YOUR CHOICE Socket Sets Sizes: 2mm to 19mm & 3/32 to3/4. #IMP-12-SK2138 (3/8"-7/8")
$39.99 #IMP-12-SK2138M (9mm-19mm)
Includes: 7.5” Ratchet & Extensions - 3” & 6” #VIM-HMS26 YOUR
5pc 3/8” Drive Shallow: 1/4” to 7/8” & 6 to 19mm CHOICE
MOR-TORQ Socket Set Deep: 3/8” to 7/8” & 10 to 19mm MSRP $103.05
$39.99
Service new fasteners found on many GM #SKT-94549 SPECIAL
models used in a variety of applications. 17 pc 1/2" DRIVE SOCKET SETS
* 1.5” Thumbwheel Ratchet $94.99 #IMP-12-SK1712 (7/16"-1 1/4")
+ Bell Housings, Interior & Body,Door Frames, & Universal Joint #IMP-12-SK1712M (10mm-27mm)
Brake Rotors & more. 1/2" Dr. HEX BIT Impact Sets YOUR
#SKT-94547-12 CHOICE
Includes Sizes “0”, “1”, “2”, “3”,“4”. SPECIAL • SAE Sizes: 1/4", 9/32", 5/16", 3/8", 7/16", 1/2",
YOUR CHOICE 9/16", 5/8", 11/16" and 3/4". $54.99
#CTA-8140 $249.99 • Metric Sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18, &
SPECIAL 19mm. 21pc ¾" Dr. SOCKET SET
$49.99 4pc 1/2” Dr. SQUARE
DRAIN PLUG SOCKET SET #SUN-2638 (SAE) #IMP-12-SK2134-6 (6pt, 7/8" to 2")
148pc MASTER BIT SET #IMC-3304 (4pc 1/2” dr.) #SUN-2639 (MM) #IMP-12-SK2134P (12pt, 7/8" to 2")
SPECIAL #IMP-12-SK2134M (19 to 50MM)
Assortment of the most popular, & hard to find • Male Sq. 8mm,10mm, & 1/2" YOUR CHOICE SPECIAL
bits, plus a 1/4" drive socket adaptor & 3-1/2" • Female Sq: 10mm $79.99 $99.99
Magnetic Quick-release bit holder. SPECIAL Nut Setter Sets
#TIT-16148 $14.99 12PC Nut Setters (OAL = 2.5”)
SPECIAL • Comes Packaged in a Blow-Molded Case
$59.99 19pc 1/2” Dr. SQUARE
DRAIN PLUG SOCKET SET #VIM-NS100 (SAE)
- Male Sq: 7/32”, 1/4”, 9/32”, 5/16”, 3/8”, 7/16”, + Size Range: 1/4” to 9/16”
1/2”, 9/16”, 5/8”, 8mm,10mm, & 12mm.
- Female Sq: 7/32”, 1/4”, 9/32”, 5/16”, #VIM-NSM100 (Metric)
11/32”, 3/8”, & 10mm.
+ Size Range: 8-14mm
#IMC-3319
SPECIAL
MSRP $83.38 YOUR CHOICE
SPECIAL $34.99
$59.99
13pc 1/4” Dr. Universal SPLINE Socket Set 36pc S2 Steel Bit Set w/ Micro Ratchet 21pc 1" Dr. SOCKET SET
w/ Mini Flex-Head Ratchet 72 tooth design, exceeds ANSI specs Sizes: 1-5/8" to 3-1/8"
Quick release extension bar.
• (1) 1/4” hex shank to 1/4” drive adapter (14) Torx (1 ea. Tamper Proof & Standard) T10 - T40 #IMP-12-SK211
• (1) 72 fine tooth mini flex-head ratchet (4) SL: 1/8", 5/32", 3/16", 1/4" SPECIAL $259.99
• (11) Spline Sockets (6) PH: #1(2pc), #2 (2pc), #3 (2pc)
(6) PZ: #1(2pc), #2 (2pc), #3 (2pc)
+ 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 (6) Hex: 5/64", 3/32", 1/8", 5/32", 3/16", 1/4"
• Aluminum Case
#SUN-9726
#SUN-9723
MSRP $47.99
MSRP $51.99
SPECIAL
SPECIAL
$34.99
$39.99
TORQUE TOOLS
HAND TOOLS Digital Torque Adapters 1/2” DRIVE TORQUE LIMITING SETS
Converts any ratchet or breaker bar into a torque measuring tool! 10pc Extension Set 8pc Extension/Socket Set
#AST-78810 #AST-78818
• Use to re-calibrate any type of torque wrench.
MSRP $151.23 MSRP $96.78
• Units of Measurement: Kg-CM, Kg-M, In-lb, Ft-lb and N-m
SPECIAL SPECIAL
• Features: LCD Backlight, Rotates/Swivels 240°, 10 Memory Settings,
& a 180° Flip Screen.
• Includes: Calibrating Block, (1) DC 3V CR2032 battery, TM
& Packaged in Blow Mold Case $119.99 $74.99 TORQUE ANGLE GAUGE
#TIT-23153 #TIT-23154 SIZES EXTENSIONS • Equipped w/ 1/2” Square Drive (Male & Fe-
male) for both socket and ratchet.
+ 3/4” Drive + 1/2” Drive 65ft/lbs (90Nm) 90ft/lbs (120Nm) • 360° scale marked in 2° increments w/ inter-
+ Range: 50-600 ft-lbs + Range: 30-150 ft-lbs 75ft/lbs (100Nm) 100ft/lbs (135Nm) vals of 10° & 30°.
80ft/lbs (110Nm) 110ft/lbs (150Nm)
SPECIAL SPECIAL 90ft/lbs (120Nm) 120ft/lbs (160Nm) #OTC-4554
100ft/lbs (135Nm)
$199.99 $74.99 110ft/lbs (150Nm) SOCKETS
120ft/lbs (160Nm)
130ft/lbs (175Nm) 17mm
140ft/lbs (190Nm) 19mm (3/4”)
150ft/lbs (200Nm) 21mm (13/16”)
7/8”
$19.99
Digital Torque Angle Gauge 4:1 Torque Multiplier "CLICK-STOP" BREAKER BAR
TORQUE WRENCHES
• Easily measure angular rotation for torque & Designed w/ (4) pinion gears in a compact • Drive: 1/2”
angle applications w/ an accuracy of +/- 2%. housing. Frictional losses in the gear train may #IMP-11-TW38 • Overall Length: 24”
• Utilizing a V-channel and magnets, it quickly
attaches to the handle of any standard ratchet, cause a torque loss of 10% to 20%. (3/8" dr. 120-960 in. lb.) #IMC-41024
wrench, or breaker bar. • Input = 3/4" $39.99
• Works on 1/4", 3/8", 1/2" & 3/4". • Output = 1" $29.99
• Built-in feature allows the user to keep track of • Output Capacity = 2,000 ft.lbs.
angular rotation even when using a ratchet. • Weight & OAL = 14lbs x 25" #IMP-11-TW12
#BRO-BLDAG001 #CEN-6387 (1/2" dr. 10-150 ft. lb.)
MSRP $122.70 MSRP $866.96 $39.99
SPECIAL SPECIAL
$99.99 $599.99
1/2” DRIVE DIGITAL REVERSIBLE TORQUE WRENCH ECONOMY MICROMETER TORQUE WRENCHES
• Range: 15-150 ft/lbs, 180-18000 in/lbs & 20.3-203Nm. 3/8” Drive 3/4” Drive
• Double Gear Sensing System (Peak & Track Mode).
• 8-bit electronics ensures accuracy of +/- 3.5%. #CEN-3T317 #CEN-3T660
• Made of Chromium vanadium alloy, engineered plastics, & w/ a soft-touch overmold.
Strength, Protection, & Comfort. (20-200 in-lbs) (100-600 ft-lbs)
• Equip w/ large backlit LED digital display & audible buzzer.
SPECIAL $49.99 SPECIAL $449.99
#BRO-BLD0212BM
1/2” Drive
MSRP $150.00
#CEN-3T415
SPECIAL
(10-150 ft-lbs)
$124.99
SPECIAL $54.99
#CEN-3T425
(25-250 ft-lbs)
SPECIAL $99.99
MICROMETER TORQUE WRENCHES PUSH THROUGH RATCHET SK HAND TOOL TORQUE WRENCH LINE
w/ Blow Molded Cases TORQUE WRENCHES Limited 1year R&R warranty, & Custom Cases.
• Sealed Tear Drop Head w/ 32-Tooth Ratchet Mechanism. w/ Blow Molded Cases Micrometer Clicker Style Adjustable w/ Dual Scale
• Knurled Anodized Aluminum Handle w/ Mid-Point Clearly #SKT-77002 (1/4” Dr. 20-150 in. lbs.)
Marked. • Selected reading is automatically locked in.
• Stamped Scale on Beam: Primary ft/lbs & Secondary Nm. • Indicates desired torque by feel and sound. $259.99
• Accurate in Clockwise Direction +/- 3% from 20% to 100% of • Accuracy +-4% right hand and +-6% left hand direction from
full. 20-100% of capacity. #SKT-77025 (3/8” Dr. 30-250 in. lbs.)
• Rugged non-slip metal handles. $209.99
#KDT-85060 #KDT-85063 • Meets ANSI standard B107.14M.
#SKT-71100 (3/8” Dr. 10-100 ft. lbs.)
(1/4” Dr. 30-200 in. lbs.) (1/2” Dr. 20-150 ft. lbs.) #CEN-97361B #CEN-97353A $204.99
MSRP $186.70 MSRP $186.24
(1/4” Dr. 20-200 in. lbs.) (1/2” Dr. 25-250 ft. lbs.) #SKT-77150 (1/2” Dr. 20-150 ft. lbs.)
SPECIAL SPECIAL MSRP $202.52 MSRP $205.18 $229.99
$144.99 $144.99 SPECIAL SPECIAL #SKT-77250 (1/2” Dr. 30-250 ft. lbs.)
$224.99
#KDT-85061 #KDT-85066 $149.99 $169.99
#SKT-77600 (3/4” Dr. 100-600 ft. lbs.)
(3/8” Dr. 30-250 in. lbs.) (1/2” Dr. 30-250 ft. lbs.) #CEN-97351A #CEN-97355A $899.99
MSRP $180.15 MSRP $227.35
(3/8” Dr. 25-250 ft. lbs.) (3/4” Dr. 100-600 ft. lbs.) Beam Style
SPECIAL SPECIAL MSRP $174.68 MSRP $796.81 #SKT-76120
$139.99 $179.99 SPECIAL SPECIAL (3/8” Dr. 75 ft. lbs.)
#KDT-85062 #KDT-85065 $144.99 $634.99 $74.99
(3/8” Dr. 10-100 ft. lbs.) (3/4” Dr. 100-600 ft. lbs.) #CEN-97352A #SKT-76130
MSRP $202.90 MSRP $932.36
(3/8” Dr. 10-100 ft. lbs.) (1/2” Dr. 150 ft. lbs.)
SPECIAL SPECIAL MSRP $178.99
$74.99
$159.99 $634.99 SPECIAL
$144.99
ELECTRONIC DIGITAL DIAL INDICATORS SETS GAUGES & CALIPERS HAND TOOLS
DRUM GAUGE All Sets Feature: Range 0-1" & Graduations .001" PROFESSIONAL 0-6” DIAL CALIPERS
#CEN-3B530
#CEN-3D101 Features (4) Measurements: Inside, Outside, Depth, &
MSRP $307.91 Step.
• Compact magnetic base
TM SPECIAL MSRP $73.27 DIAL
$229.99 SPECIAL • .100” per Revolution w/ .001" Graduations.
Range: 6” - 20” (150-500mm) w/ .001” (.01mm) graduations. $64.99 #CEN-3C101
Easy to Read, w/ Pointed anvils and 4-1/4” long arms.
#CEN-3D102 MSRP $54.84
• On/Off magnetic base SPECIAL
with flex arm.
MSRP $125.67 $49.99
SPECIAL DIGITAL - Inch & Metric
DIGITAL ROTOR GAUGE $109.99 • Graduations of .0005” & .01mm
• Range 0-4.00"/0-100mm #CEN-3D103 #CEN-3C301
• Graduations .001"/.01mm • Locking pliers clamp to any convenient object MSRP $34.50
• Easy to read digital display w/ inch/metric conversion MSRP $99.56
SPECIAL
• Measure brake rotors and ball joints
• Pointed anvil with 3.50" long arms $29.99
#CEN-3M430A SPECIAL
MSRP $72.14 $84.99
SPECIAL
$64.99 #CEN-3D104
• On/Off magnetic base.
MSRP $101.67 DIGITAL - Inch, Metric, & Fractional
DIGITAL WHEELS-ON ROTOR GAUGE SPECIAL • Large LCD digital display.
• Graduations of .0005”, .01mm, & 64th.
Measures the rotor without removing the wheel to pre-qualify $89.99
#CEN-3C350 #CEN-3C351
brake jobs, by providing easy access between dust shield and
rotor.
Digital read-out with push button inch/metric conversions. DIGITAL Display MSRP $39.68 (Carbon Fiber)
Range: 0-3.5”/0-88mm #CEN-3D105 MSRP $19.13
Graduations: .001”/.01mm SPECIAL
• .001" / .01mm graduations SPECIAL
#CEN-3M335 • On/Off magnetic base. $34.99
MSRP $170.69 $14.99
MSRP $115.34
SPECIAL
SPECIAL
$149.99
$99.99
ANGLE FINDER 0-1" DIAL INDICATOR SELF-CENTERING 6pc TELESCOPING GAUGE SET
Used to measure truck and automotive #IMP-26-DI1 CYLINDER BORE GAGE Measurements are read with a micrometer.
front ends and drive shaft angle. Covers sizes 0-6".
• Graduations 0.001" • 2-6” Range
#CEN-6494A • .0005" graduations #IMP-26-TG6
$14.99
MSRP $16.94 #CEN-3D301 $24.99
MAGNETIC BASE
SPECIAL MSRP $142.02
• 77 lbs of Holding Power
$14.99 • On and Off switch. SPECIAL
#IMP-26-MB $124.99
$19.99
BRAKE LINING GAGE DIGITAL DISC BRAKE MICROMETER 6pc TELESCOPING GAUGE SET
Graduations 0-½” w/ 1/64” increments. • .300“-1.300” Range • Both contacts release or lock by turning knob at end of handle. Handles
• .0001“ Graduations up to 5-1/2”.
#CEN-3S125 • Digital read out to .001” • Self Centering gages checks slots, grooves, recesses, and cylinders.
• 3½ deep frame • Measurement is read w/ a micrometer.
MSRP $22.04 • Range 5/16” to 6”
#CEN-3M230
SPECIAL #CEN-3S116
MSRP $96.29
$14.99 MSRP $40.40
SPECIAL
SPECIAL
$69.99
$34.99
DEPTH MICROMETER MECHANICAL MICROMETERS
• Range 0-6” w/ .001 Graduations. • 3M201; dial read-out. Range 0-1” & Graduations .0001”
• For precision depth measurements. • 3M301; electronic digital read-out .
• Measure: hole depth, recesses, & keyways.
+ Push-Button inch/metric conversion.
#CEN-3M646 + Range 0-1”/0-25mm & Graduations .0001”/.001mm.
MSRP $235.71 #CEN-3M201 (Dial)
SPECIAL MSRP $76.37
$159.99 SPECIAL $59.99
#CEN-3M301
MSRP $169.06
SPECIAL $129.99
TOOL ORGANIZATION
HAND TOOLS SOCKET BOSS DURA-PRO TWIST LOCK SOCKET ORGANIZERS
Universal Twist-Lock Socket Trays • Simple & Secure – twist your sockets into a locked position.
3-Rail Universal (1/4”, 3/8”, & 1/2”) • Socket clips will adjust to any position on either side of the rail.
Kit includes: (1) Socket Tray, (3) 18” Universal • Hangs vertically for convenient storage & easy to transport.
Socket Rails, (15) Socket Clips of each Size.
• Each 18” socket rail includes 15 clips & 96 I.D. stickers.
#ERN-8450 (Red)
#ERN-8451 (Blue) STANDARD RAIL • Made in USA – lifetime guarantee. MAGNETIC RAIL
2-Rail 3/4” Drive 1/4” 1/4” TM
Kit includes: (1) Socket Tray, (2) 18” Socket #ERN-8400 (Red) #ERN-8400M (Red) THE PLIER PRO
Rails, (14) 3/4” drive Twist-Lock Socket Clips, & #ERN-8403 (Blue) #ERN-8403M (Blue)
(192) ID Stickers. #ERN-8420 (Black) #ERN-8420M (Black) Maximize storage by organizing your pliers in
and upright position in your tool box!
#ERN-8458 (Red) 3/8” 3/8” Dimensions: 10” x 3.5” x 3”
#ERN-8459 (Blue)
#ERN-8401 (Red) #ERN-8401M (Red) #ERN-5500
#ERN-8404 (Blue) #ERN-8404M (Blue) SPECIAL
#ERN-8421 (Black) #ERN-8421M (Black)
SPECIAL YOUR CHOICE 1/2” 1/2” $12.99
#ERN-8402M (Red)
$24.99 #ERN-8402 (Red) #ERN-8405M (Blue) LOW PROFILE RAILS
#ERN-8405 (Blue) #ERN-8422M (Black)
#ERN-8422 (Black) Fits in even the shallowest drawers
YOUR CHOICE & Will Never Slip!
Transportable Versatile Secure YOUR CHOICE
$16.99 #ERN-6040 (Screwdriver)
$7.99
- Holds up to
24pc & 30pc WRENCH TOWERS "THE TRAY" CLASSIC 14 Screwdrivers
MSRP $11.95
• Double-Sided Tower provides organization for both SAE & Metric. Dimensions: 11" x 16" x 1.5"
• No-Slip Rubberized Foot Pegs, ensure a stable base. SPECIAL
• Top Hand-Grip, for ease of transport. #ERN-5010 (Red)
#ERN-5011 (Black) $9.99
#ERN-5224 (24 wrenches) #ERN-5012 (Blue)
SPECIAL $14.99 YOUR CHOICE
#ERN-5230 (30 wrenches) $9.99 #ERN-6050 (Wrench)
SPECIAL $19.99
“THE TRAY" JUNIOR - Holds up to 30 Wrenches
"GRIPPER" WRENCH ORGANIZERS - Graduated design
Dimensions: 10.5" x 10.5" x 1.5" MSRP $19.95
"GRIPPER" flexible teeth provide wrench security for travel. Includes a
flexible handle and it hangs on a wall. #ERN-5020 (Red) SPECIAL
#ERN-5021 (Black)
#ERN-5022 (Blue) $16.99
7-TOOTH 11-TOOTH YOUR CHOICE 16 PIECE WRENCH 2 PIECE WRENCH
1/4” to 5/8” / 6-12mm 1/4” to 7/8” / 6-16mm $5.99
#ERN-5080 (Red) #ERN-5086 (Red) STUBBY WRENCH
#ERN-5081 (Black) #ERN-5087 (Black)
YOUR CHOICE YOUR CHOICE “GRIPPER” ORGANIZERS ORGANIZERS RAIL ORGANIZERS
#ERN-5074 (10 tooth Red)
$4.99 $6.99 #ERN-5075 (10 tooth Black) Slotted for hanging. Holds up to 20 wrenches.
#ERN-5076 (11 tooth Red) Cut to fit different sizes.
9-TOOTH 15-TOOTH #ERN-5077 (11 tooth Black) #ERN-5060 (Red)
#ERN-5061 (Black) #ERN-6012 (Red)
1/4” to 3/4” / 6-15mm 1/4” to 1-1/8” / 6-20mm YOUR CHOICE #ERN-6013 (Black)
YOUR CHOICE
#ERN-5084 (Red) #ERN-5088 (Red) $6.99 YOUR CHOICE
#ERN-5085 (Black) #ERN-5089 (Black) $4.99
$6.99
YOUR CHOICE YOUR CHOICE
$5.99 $7.99
Quik-Pik UNIVERSAL Wrench Racks Organize your Sockets for Quick,
SAE & Metric Wrench Racks
• Tough polypropylene rack holds 13 wrenches, Easy Identification by Size and Style
• Organizes (13) wrenches while the clear & comes w/ two sets of peel-off numbers.
labeling makes sizes easy to grab and go. All organizers hold deep & regular sockets. Made in U.S.A.
• Low profile, fits 2-inch deep toolbox drawers. - Metric sizes: 6mm through 20mm
• Made of tough polypropylene plastic. - SAE sizes: 1/8″ through 1″. SAE METRIC
• Spring tabs can also be trimmed to #HNS-1401 (1/4" dr, 1/8" to 9/16") #HNS-1402 (1/4" dr, 4mm to 14mm)
Red - SAE custom fit extra thick wrenches.
$10.99 $10.99
(Sizes: 1/4" to 1") Blue - Standard Universal #HNS-3801 (3/8" dr, 1/4" to 1") #HNS-3802 (3/8" dr, 6mm to 20mm)
#HNS-5300
#HNS-5301 $12.99 $12.99
$6.99 $8.99 #HNS-1201 (1/2" dr, 3/8" to 1-1/4") #HNS-1202 (1/2" dr, 10mm to 27mm)
Grey - Metric Grey - Reverse Universal $14.99 $14.99
#HNS-3500 #HNS-9301 (3pc set) #HNS-9302 (3pc set)
(Sizes: 7mm to 19mm)
$8.99 $34.99 $34.99
#HNS-5302
$6.99 24" Magnetic Bar Holder
3/8" DRIVE MASTER Organizes Your Tools & Holds them Securely.
HEX & TORX SOCKET TRAY
#HNS-50000 #AST-7324
$9.99 SPECIAL
$24.99
ASSORTMENTS
ALUMINIUM UNIVERSAL BODY SHOP RIVET KIT 70pc GREASE FITTING Assortment SPECIALITY TOOLS
THREAD GAUGES 265pc w/ 12 Varieties Contains the following Sizes (qty):
+ 1/8” = Straight (10), 45° (5), 90° (5).
TM 1) US Threads 2) Metric Threads Descriptions for each rivet, + 1/4” = Straight (20), 45° (5), 90° (5).
- From #5 to 3/4" & - From2.5 to 22mm w/ OEM application, and reorder numbers. + 6mm x 1” = Straight (10).
- Pitch of 10TPI to 44TPI - Pitch of .45 to 2.5mm + 8mm x 1” = Straight (5).
#POP-60980 + 10mm x 1” = Straight (5).
3) Pipe Threads 4) Spark Plug Threads SPECIAL
- From 1/16" to 1/2" - From 10 to 18mm. #TIT-45215
- Pitch of 14TPI to 27TPI $34.99
SPECIAL
100pc Grease Fitting Assortment #THX-432
#LNC-5186 (MM) $14.99
$11.99
Contains the following Sizes (qty):
+ 6mm = Straight (40), 45° (20), 90° (10). COTTER PIN Assortments 500pc ALUMINIUM RIVET 150pc HITCH PIN Assortment
+ 8mm = Straight (5), 45° (5), 90° (5).
+ 10mm = Straight (5), 45° (5), 90° (5). 1,000pc Master Set Assortment Contains the following Sizes (qty):
Contains the following Sizes (qty.): + 3/32” x 1-3/16” (42)
MSRP $154.80 1/16” x 1” (360), 3/32” x 1” (240), Contains the following Sizes (qty): + 5/64” x 1-5/16” (30)
3/32” x 1-1/2” (140), 1/8” x 1-1/4” (115), + 5/64” x 1-9/16” (25)
SPECIAL 1/8” x 2” (75), & 5/32” x 2-1/2” (50). + 1/8” x 1/4” (120) + 7/64” x 1-5/8” (25)
+ 9/64” x 1-3/4” (20)
$129.99 #TIT-45204 + 1/8” x 5/16” (120) + 5/32” x 2-15/16” (8)
#LNC-5469 (SAE)
SPECIAL + 1/8” x 3/8” (120) #TIT-45210
Contains the following Sizes (qty):
+ 1/8” = Straight (20), 65° (10), 90° (10). $14.99 + 3/16” x 15/16” (70) SPECIAL
+ 1/4”-28 = Straight (40), 45° (10), 90° (10).
555pc Set + 3/16” x 3/8” (70) $9.99
MSRP $105.85 Contains the following Sizes (qty.):
1/16” x 1” (150), 3/32” x 1” (150), #TIT-45228
SPECIAL 3/32” x 1-1/2” (100), 1/8” x 1-1/4” (75),
1/8” x 2” (50), & 5/32” x 2-1/2” (30). SPECIAL
$89.99
#TIT-45205 $14.99
96pc BLADE FUSE Assortments SPECIAL O-RING Assortments 158pc WIRE NUT Assortment
12pc each of the following Zinc Electrodes: $9.99 Buna-N BG715 Rubber, Contains 32 Sizes! Reusable Flame-Resistant Polyproelene Shell.
407pc SAE
- 3A (Violet) - 5A (Orange) 144pc LARGE Sizes Set Nominal I.D. Sizes: Contains the following Sizes:
- 7.5A (Brown) - 10A (Red) Contains the following Sizes (qty.): + 1/8” up to 2-1/4”.
- 15A (Blue) - 20A (Yellow) 1/8” x 2” (50), 3/32” x 2-1/2” (30), 3/16” x 3” (20), 419pc MM + Gray #22 to #16 AWG Wire (300v) Qty: 40
- 25A (Clear) - 30A (Green) 1/4” x 2” (20), 1/4” x 3” (16), Nominal I.D. Sizes:
& 5/16” x 2-1/2” (8). + 3mm up to 50mm. + Blue #22 to #14 AWG Wire (300v) Qty: 40
#TIT-45206 #TIT-45202 (SAE) + Orange #22 to #14 AWG Wire (600v) Qty: 50
#TIT-45203 (MM)
#TIT-45227 (ATO) SPECIAL + Yellow #18 to #12 AWG Wire (600v) Qty: 18
SPECIAL
$9.99 + Red #18 to #10 AWG Wire (600v) Qty: 10
$19.99
SPECIAL #TIT-45339
$14.99 SPECIAL
#TIT-45229 (Mini) $9.99
SPECIAL
$14.99 125pc RUBBER GROMMET 120pc ROLL PIN Assortment 80pc VACUUM CAP Assortment
88pc MASTER Auto Fuse Assortment Assortment Contains the following Sizes (qty): Constructed of Heat Resistant Buna-N Rubber.
+ 5/32” x 5/8” ranging Contains the following Sizes (qty):
5pc each of the following Zinc Electrodes: Contains Rubber Grommet Sizes : to 3/16” x 1-1/4”. + 3/16” (20), 5/32” (20),
+ 1/8” x 1/4” ranging to 3/4” x 15/16”. 7/32” (20), 1/4” (10),
Maxi Blade Fuses Contains Rubber Plug Sizes: #TIT-45342 5/16” (5), & 3/8” (5).
+ 9/32”, 3/8”, 1/2”, 5/8”,
- 20A (Yellow) - 30A (Green) 3/4”, 7/8”, & 1”. SPECIAL #TIT-45252
(Red)
- 40A (Orange) - 50A (Tan) #TIT-45214 $9.99 SPECIAL
(Purple)
- 60A (Blue) - 70A SPECIAL $14.99
(Orange)
- 80A (Clear) - 100A (Red) $9.99
(Yellow)
Blade Fuses & Mini Blade Fuses (Green)
- 3A (Violet) - 5A
- 7.5A (Brown) - 10A
- 15A (Blue) - 20A
- 25A (Clear) - 30A
#TIT-45230 270pc HNBR O-RING Assortment 200pc SPRING Assortment 110pc COPPER WASHER Assortment
SPECIAL
$19.99 • Hydrogenated Nitrile Butadiene Rubber (HNBR) - (76) Compression Springs Contains the following Sizes (qty):
• Works on applications between -58° F to 329° F + Range 7/32” x 11/16” to 3/8” x 3/4” + 1/4” (30), 5/16” (25), 3/8” (20), 7/16” (15),
71pc MICRO-2 FUSE Assortment • GREAT For R-134A Air Conditioning Systems. 1/2” (10), & 5/8” (10).
• Contains the following Sizes: - (134) Extension Springs
+ 7/32” x 1/16” ranging to + Range 3/16” x 1-3/4” to 5/16” x 1-3/4” #TIT-45217
11/16” x 5/64”. SPECIAL
#TIT-45200 $14.99
#TIT-45201 SPECIAL
300pc E-CLIP Assortment
SPECIAL $9.99
Black Oxide Finish & Contains Sizes (qty):
$9.99 300pc SNAP RING Assortment + 1/16” (30), 1/8” (30), 3/16” (40),
1/4” (50), 3/8” (50), 1/2” (40),
10pc each of the following Zinc Electrodes: Contains Internal Sizes: 5/8” (20), 3/4” (20), & 7/8” (20).
+ 3/16” ranging to 7/8” .
- 5A (Orange) - 25A (Clear) Contains External Sizes: #TIT-45208
- 30A (Green) + 1/8” ranging to 1-1/4”. SPECIAL
- 7.5A (Brown) 36pc LOW PROFILE $9.99
#TIT-45212
- 10A (Red) SPECIAL
- 15A (Blue) MINI FUSE Assortment $9.99
- 20A (Yellow)
- Fuser Puller Contains Fuse Puller and
#TIT-45231 (5) each of the following Zinc Electrodes:
SPECIAL - 5A (Orange) - 7.5A (Brown)
- 10A (Red) - 15A (Blue)
$21.99 - 20A (Yellow) - 25A (Clear)
- 30A (Green)
#TIT-45237
SPECIAL
24pc MAXI FUSE Assortment $19.99
3pc each of the following Zinc Electrodes: HEAT SHRINK TUBE ASSORTMENTS
- 20A (Yellow) Versatile heat shrink tubes for use in a wide variety of applications in automotive, marine, electrical, industrial, home and more.
Excellent for insulation, strain relief, abrasion shielding and corrosion protection.
- 30A (Green) Forms a secure bond over smooth and irregular shapes.
Shrink tubes made of polyolefin material.
- 40A (Orange)
- 50A (Red)
- 60A (Blue) 60pc DOUBLE WALLED w/ 3:1 Shrink Ratio 160pc MULTI-COLOR w/ 2:1 Shrink Ratio
- 70A (Tan) + Adhesive lining provides an environmental seal + (5) colors in (8) Sizes
- ideal for color coding & bundling.
- 80A (Clear) to prevent moisture, dirt, and chemicals from - 3/32", 1/8", 3/16", 1/4", 3/8", 1/2",
affecting electrical connections.
- 100A (Purple) + (5) Red & Black Sizes 5/8" & 3/4".
-1/8", 3/16", 1/4", 3/8", & 1/2"
#TIT-45232 #TOO-23250
#TOO-23210
SPECIAL
$24.99 SPECIAL $19.99 SPECIAL $14.99
UNDER CAR KITS
SPECIALITY TOOLS BALL JOINT SERVICE TOOL SETS BEARING RACE & SEAL DRIVER MASTER SET IN-LINE FLARING SETS TM
SET w/ 4-WHEEL DRIVE ADAPTERS Insert wheel bearing race & seals w/out damage to race & axle • Lines the adapters, cone & #CAL-154 (Metric)
housing. Set includes 9 disks (sizes 1.565” to 3.18”) and driving tube in a perfect line, making
Designed for the removal & installation of press-fit parts such as handle. Packed in a blow mold storage case. perfect flares every time. - 4.75mm, 5mm, & 6mm
ball joints, universal joints and truck brake anchor pins. Set • Reduces the chance of the
contains C-frame press, 3 receiver tubes, installation and remov- #AST-7824 tube slipping, while increasing #CAL-164 (SAE)
ing adapters. Services 1967 thru current 1/2 & 3/4 ton 4WD the overall life of the clamp by
vehicles with Dana 44 front axle. MSRP $66.74 not wearing the down teeth. - 3/16”, 1/4”, & 5/16”
• Slender low profile allows MSRP $50.02
#AST-7865 SPECIAL user to make flares on the
vehicles. SPECIAL
MSRP $123.29 $54.99 YOUR CHOICE
SPECIAL $34.99
$99.99
MASTER ADAPTER SET HEAVY-DUTY BEARING DOUBLE FLARING TOOL KIT
RACE & SEAL DRIVER SET
All the receiving tubes and removing/installing adapters needed • Designed for double or single flare in copper, aluminum, soft
to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive • Fits most Class 8 vehicles, plus some medium-duty vehicles. steel brake line, and brass tubing (to 45 degrees). Includes five
pick-ups, vans and sport utility vehicles through 1997. Work on • Includes (6) drivers and handle extension for driving bearing adapters 3/16" through 1/2" (4.8mm through 12.7mm).
press-fit upper & lower ball joints. races and seals on hubs with deep brake drums without • Forged yoke made of heat-treated steel.
removing the drums.
#AST-7868 • Driver sizes: 3-43/64", 4-7/8", #OTC-4503
4-13/16", 5-1/2", 5-25/32", and 6".
MSRP $117.86 SPECIAL
#LIS-61900
SPECIAL $39.99
MSRP $249.95
$79.99 A/C COMPRESSOR CLUTCH REMOVER KIT
SPECIAL
MASTER SET • FS6, C171, 6P & 148 compressors.
$199.99 • GM R4 & A6, HR-6, DA-6 and
Set includes: C-Frame press that can be used to remove/replace V5 compressors.
universal joints, Master Adapter Set #AST7868, & also included 10pc BEARING RACE & SEAL DRIVER SET • SD505, 507, 510, 575, 708 and
is the #2030-1 live center forcing screw plug. Comes in blow 709 compressors:
molded carrying case. Permits installation of tapered bearing races and seals without • The 2 & 3 hole puller plate fits most
damage to the component or housing. Includes a driver handle clutches, the mechanical force does
#AST-7897 plus popular bearing and seal drivers, ranging from 1.565" to the pulling.
3.180". Housed in a blow-molded storage case.
MSRP $234.14 #AST-7886
#OTC-4507
SPECIAL MSRP $45.73
MSRP $79.95
$179.99 SPECIAL
SPECIAL
BALL JOINT SERVICE SET $34.99
$69.99
• Simplifies removal / installation of most press-in ball joints.
• Includes: C-frame press, 3 receiver tubes,
plus removal & installation adapters.
#OTC-7249
MSRP $189.95
SPECIAL
$169.99
5pc Pickle Fork Ball Joint Separator Set 19pc Bushing Driver Set 18pc. Brake Caliper Wind Back Tool Set
• Used to remove ball joints, tie rods, pitman arm. Remove & install bushings ranging from • Adaptor plates w/ thrust bolt assembly & reaction plate are
• One piece design ensures durability, rigidity, and complete 3/8" to 1-3/8" in diameter. precisely made, preventing damaged pistons & seals.
transfer of hammering forces.
• Includes Sizes (depth): 11/16"(2-3/4"), 15/16"(3"), • Includes large, medium, & small driver #AST-78618
1-1/16"(2-7/8"), 1-7/16"(2-3/8"), and 1-5/8"(3-1/8") handles with nuts. Housed
in a blow-molded MSRP $70.20
#AST-78807 storage case.
SPECIAL
MSRP $64.83 #OTC-4505
$49.99
SPECIAL SPECIAL
$49.99 $59.99
Fan Clutch Wrench Sets 10pc Fan Clutch Wrench Set 8pc PROFESSIONAL 24pc In-Line Dowel Pin
3pc UNIVERSAL SET • 2-1/4" & 3-1/4" Fan Pulley Holding Tool BRAKE TOOL SET Puller Master Set
• 2-3/8" Fan Clutch Bolt Holding Tool
Includes: water pump pulley wrench, spanner • 2-1/8" & 3” Fan Clutch Pulley Holding Tool Includes: Spring Compressor, Brake Spring Extracts dowels w/out the use of a slide ham-
wrench, and double-ended turning wrench. • 2-13/16" Fan Hub Wrench Installer, Spring Removal Tool, Brake Retaining mer, eliminating the cost as well as the effort
Use w/ 1/2” ratchet or breaker bar. • 1-7/16" Fan Clutch Nut Wrench Spring Tool, Brake Spring Pliers, and potential hand injury. Can be used w/ an air
• 1-7/16" & 1-9/16” Fan Clutch Wrenches (2) Brake Adjustment Spoons, or traditional ratchet.
#LIS-43600 • 1-7/8" Clutch Nut Wrench Left Hand & Mini Adjustment Spoon.
#CAL-95400
MSRP $82.95 #AST-7895 #AST-7848
MSRP $296.63
SPECIAL MSRP $191.17 MSRP $59.68
SPECIAL
$64.99 SPECIAL SPECIAL
$199.99
$149.99 $39.99
TM GEAR & BEARING PULLERS ASSORTED PULLERS SPECIALITY TOOLS
GRIP-O-MATIC PULLERS Knife like edges fit snugly behind part being pulled. FLANGE TYPE PULLER
#OTC-1020
#OTC-1122 • Pulls harmonic balancers, timing gears,
2 jaw; 1-Ton. & other parts having tapped holes.
2 ⅛" max. reach, 3¼" max. spread (Works w/ a 5 ton • Includes attachment cap screws.
Grip-O-Matic or Push-Puller)
$49.99 MSRP $53.95 #OTC-518
#OTC-1022 SPECIAL $49.99 MSRP $53.95
2 jaw; 2-Ton. #OTC-1123 SPECIAL
3 ⅜" max. reach, 4" max. spread
(Works w/ a 7 or 10 ton $49.99
$39.99 Grip-O-Matic or Push-Puller)
MSRP $101.95
#OTC-1023
SPECIAL $94.99
Reversible, 2/3 way jaws, 2-Ton.
3 ⅜" max reach, 4¾” max spread. 5 TON BAR TYPE PULLER PITMAN ARM PULLER
$59.99 AND BEARING SEPARATOR SET • Adjustable w/ replaceable forged jaws.
• Two clamp bolts lock jaws on pitman arm.
#OTC-1027 • Combines two popular bearing “splitters" (2" & 3"), four sets of • Can perform other pulling jobs.
hex push-puller legs and a bar-type puller
Reversible, 2/3 way jaws, 5-Ton. head w/ a 9/16" forcing screw. #OTC-7311A
5½" max. reach, 7" max. spread • Includes blow mold case.
MSRP $90.95
$79.99 #OTC-4518
SPECIAL
#OTC-1035 MSRP $142.95
$79.99
2 jaw; 7-Ton. SPECIAL
5" max. reach, 9" max. spread
$129.99
$99.99
MULTI PURPOSE BEARING 5pc Alternator Decoupler Pulley Kit
#OTC-1038
AND PULLEY PULLER SET • Remove & Install many ADP’s on popular vehicles in N. America.
Long, 2/3 way jaws; 7-Ton. • To remove these pulleys, the shaft coming from the alternator needs
8¾" max. reach, 11" max. spread • Set includes drop-forged components, to be locked in place while the pulley is spun either clockwise or
used in a variety of combinations. counter clockwise, depends on manufacturer.
$119.99 • Spread: 3" to 5". Set Includes the Following:
• Reach: 1" to 2-1/4". H22 x 33T, H17 x H19, H10 x 70mmL,
#OTC-1041 • Blow molded storage case. 12mm x 75mmL x T50, & Spline M10.
2/3 way jaws, 13-Ton. #OTC-4534 #CAL-756
11" max. reach, 12" max. spread
MSRP $224.95 MSRP $29.93
$299.99
SPECIAL SPECIAL
PILOT BEARING PULLER
$199.99 $19.99
w/ SLIDE HAMMER
PILOT BEARING PULLER HARMONIC BALANCER PULLER
Removes bearings or bushings on flywheel, pump, generator,
etc. Includes 1/2in. to 1-3/8in. (13mm to 32mm) I.D. capacity • Removes pilot bearings & bushings from flywheel during clutch • Works on harmonic balancers, crankshaft pulleys,
jaws, & a 3lb. Slide Hammer replacement. Puller has fingers w/ a 1½" length. steering wheels, and gear pulleys.
• Positive engagement design locks • Also works on tapped flywheels of
#CAL-28 tips of fingers behind bearing while electric or two-cycle motorcycles.
expanding against inner diameter
MSRP $62.17 to grasp bearing firmly. #AST-7846
SPECIAL #ALL-648619 MSRP $76.32
$39.99 MSRP $46.17 SPECIAL
SPECIAL $59.99
$44.99
13pc Slide Hammer Puller Set 9-Way Slide Hammer Puller Set 10-Ton Straight Bar Puller Set
• Combination Puller w/ 5-lb Malleable Steel Slide Hammer. • Pulls flange-type rear axles and most front-wheel drive hubs. • (1) 7" Short Forcing Screw
• Drop-Forged Steel Pullers & Attachments. • Internal and external jaws provide a variety of combinations. • (1) 12" Forcing Screw
• Fully-Hardened Shaft & Accessories. • Two & Three-way cross blocks and cone. • (2) Cap Screw Jaws w/ 15/16" Reach
• Converts into a 2 or 3 Jaw Internal/External Puller • Grip wrench adapter and a dent puller attachment. • (2) Double Reach Wide Jaws w/ 8" Reach
for Reaching Tight Areas. • (2) Double Reach Narrow Jaws w/ 8" Reach
#OTC-4579 • (2) Extra Narrow Jaws w/ 8" Reach
#IMP-16-SHP13 *rated @ 5-tons
MSRP $139.95 • (1) 10" Spread
$74.99 • (3) Spring Clips
SPECIAL
#IMC-4210
$129.99
MSRP $199.76
PULLEY PULLER & INSTALLER KIT Power Steering & Alternator
SPECIAL$149.99
Removes pressed-on alternator and power steering pulleys on Pulley/Puller Installer Kit
late model GM, Ford & Chrysler engines. Installs late model GM 5-Ton Straight Bar Puller Set
alternator and power steering pulleys including Quad 4. All tools necessary for most
power steering pump pulleys, • (1) 9” Spread
#AST-7874 including adapters for GM Quad 4 • (2) Cap Screw Jaws w/ 3” Reach
and 3.1L and • (2) Wide Jaws w/ 5” Reach
MSRP $30.23 Ford 4.6L modular • (2) Narrow Jaws w/ 5” Reach
engine pulleys. • (1) 9-3/4" Forcing Screw
SPECIAL • (1) 10" 2-Way Cross Arm
#ALL-648605
$24.99 #IMC-4205
MSRP $54.36
MSRP $54.38
SPECIAL
SPECIAL
$49.99
$39.99
TORCHES, SOLDERING & HEAT
SPECIALITY TOOLS HEAT GUNS 14.1oz AirFuel Tanks 5-1/8oz Ultratane Butane
1680watt INDUSTRIAL GRADE HEAT GUN PROPANE Triple-refined formula reduces filter clogs. TM
#FIR-0387-0436 Contains no CFCs (chlorofluorocarbons).
Temps up to 750°F. Will not harm the ozone layer. SOLAR POWERED AUTO
Features: universal motor, diecast aluminum $9.99 Comes with a convenient DARK WELDING HELMETS
housing, reinforced mica-insulated ceramic single piece universal filling tip.
heating element & externally replaceable carbon MAP/PRO™ LARGE VIEWING AREA: 3.86” x 2.17”
brushes. #FIR-0916-0122 #MAS-51773-72 Durable, light weight material is corrosion
$5.99 resistant & flame retardant; w/ high performance
#MAS-HG501A $9.99 filters protects against UV & IR.
3 in 1 SELF-IGNITING Utilizes high performance solar cells w/ 2 built-
MSRP $149.81 TRIGGERTORCH™ KIT in 3V lithium batteries as power back-up.
*Replacement Lens #TIT41264
SPECIAL Butane Powered Flameless Heat Tool Kit
Kit Includes: 3-Tips (solder, heat, & hot knife), #TIT-41265
$134.99 shrink attachment, polyfoam cutter, 5” wire
cutter, 5” needle nose pliers, table top stand, (AMERICAN EAGLE)
1600watt INDUSTRIAL VARIABLE TEMP AirFuel SMP-41 60/40 solder & sponge.
HEAT GUN Auto Ignition Hand Torch #TIT-41266
#MAS-MT76K
Cool Air Setting; both cools down tool Auto Igniter for Instant Flame. $69.99 (FLAMES)
and works for no-heat applications. Trigger Lock-On Button.
(3) Power Settings Works w/ both #TIT-41267
+ Max Temperature: 1000-1100° F Propane & MAP/Pro.
Powerful Blower moves 23 CFM (SWOOSH)
(3) Position Non-Slip Steel Base #FIR-0387-0465
$74.99 BUTANE TORCHES #TIT-41279
#AST-9426
AirFuel LIGHTER (SKULL WRECKER)
MSRP $99.25 Auto Ignition Hand Torch
Generates 2500°F. #TIT-41288
SPECIAL Auto Igniter for Instant Flame. Butane refillable.
Trigger Lock-On Button. Safety lock with chain. (PIN-UP GIRL)
$79.99
Works w/ both Propane & MAP/Pro. #MAS-MT5 #TIT-41290
1550W Heavy-Duty HEAT GUN
SMP-31 TORCH $11.99 (GEAR HEAD)
Variable Temperature: 120°F to 1,100°F. #FIR-0387-0463
Operates on 120 volts COMPACT MICROTORCH™
10ft Power Cord. $54.99
• Adjustable & wind resistant flame,
#DWA-D26950 SMPK-31 KIT w/ temperatures up to 2500°F.
#FIR-0387-0464 * Fuel Cells Not Included
MSRP $125.34 Order Separately #RC31 (2 pack)
$64.99
SPECIAL #MAS-MT11
$89.99 $14.99
120 VOLT ECONOMY HEAT GUN AirFuel Pencil Tip Torch
Economical, lightweight, multi-use heat gun Solid Bass Burn Tube Construction.
perfect for automotive applications. Works only w/ Propane.
(2) Heat Settings
= 500°F & 1000°F. P-10 TORCH
#FIR-0387-0470
#MAS-EC100
$24.99
$49.99
12.5amp 120v HEAT GUNS PK-10 KIT STANDARD MICROTORCH™ MSRP $133.17
#FIR-0387-0471
#TIT-22400 Up to 2400°F pinpoint flame. SPECIAL
$34.99 Self-igniting, w/ adjustable flame. YOUR CHOICE
Durable ABS body, Double insulated, 6.5ft Hand-Held or Tabletop use.
cord, & 3-position rocker switch: off, high, & low. SOLDERING GUN KITS Built-in refillable plastic $99.99
Rated Power: fuel tank, w/ a 2 hour run time.
Low 750W / High 1500W Includes Built In Gun rest and extra fittings.
Temperature (F): #MAS-MT51
Low : 572° / High : 932° #WEL-7200PK
$29.99
MSRP $33.71 MSRP $46.77
Magnetic Soldering Clamp
SPECIAL SPECIAL
Alligator clamps firmly hold wire
$24.99 $44.99
MICRO TORCH KIT & small parts when soldering.
#AST-9425 PROFESSIONAL SOLDERING KIT
#PPMT- Micro Torch w/ flame adjustment from #LIS-55000
Ideal for stripping paint, removing decals/ Tin Plated Cooper soldering tips provide $19.99
stripes, shrinking wire wrap, etc. superior heat transfers, and 2 Built-in Lights 1/2" to 2-1/2", excellent for soldering & brazing.
Double Insulation for extra safety help to illuminate work. - Max temp of 2500 F. (Torch mode)
(2) Settings = Low: 572° F / High: 932° F Extra tips for Cutting,
Comes w/ a total of (4) Nozzles: Smoothing and Shaping. - Max temp of 950 F. (Soldering mode)
+ Large & Small Deflector Nozzles Kit Includes: Heat Blower Attachment & Tip,
+ Large & Small Reduction Nozzles #WEL-D550PK
Packaged in a Blow-Molded Case. Soldering Attachment & Tip, Heat Shrink, Hot PORTABLE SOLDERING KIT
MSRP $87.73 Knife, & Tube of Solder.
MSRP $36.58 Electronic ignition w/ adjustable temp control.
SPECIAL #PWR-PPMTKIT01
SPECIAL Butane powered. Multiple tips for shrink wrap-
$64.99 MSRP $112.50 ping, hot-air injection cutting & soldering.
$29.99
SPECIAL #PWR-PPSK
$84.99 MSRP $71.53
SPECIAL
$64.99