SECTION E ACCESSORIES V1

ACCESHSASDINOG RIES
NATURAL LIGHT MADE RIGHT™

ACCESSORIES



FASCIA OVERVIEW {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com

Like any good performance, seeing behind the scenes can sometimes ruin the
magic. We all know that ever y shade needs hardware to hang and operate, but
do we need to see it? Not if you don’t want to!
Fascia is a decorative aluminum cover used to conceal
the shade hardware from view at the front of the
shade (towards the room), at the back of the shade
(towards the glass), or both sides together. Our notch-
less Fascia snaps right into place on our SoloMount

Brackets, requiring no tools to install
or uninstall. For Regular or Reverse
Roll shades and available in five colors,

this multifaceted accessory
has everything covered.

Fascia
can be
cut to
size or
ordered in full-
length pieces,
allowing you
to customize
when you arrive to your project.
Engineered for stability and
ease of use, the lightweight
aluminum is not only easy to
manipulate during installation,
but also saves on shipping costs!
To c omplete the look, matchin g
aluminum End Caps are available
for each Shading System that can be placed over the bracket at the end of the
installation. End Caps are available in various sizes for all brackets, and come in
all five aluminum finish colors to match your Fascia.
Unsure if you want to use Fascia on your project? No problem! Our SoloMount
Brackets allow for the addition of Fascia and End Caps at any time after installation.

The above illustration is for illustrative purposes and may not represent the products in real life scenarios. ®
Color accuracy is not guaranteed in print or on screen.
E1
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M V1 ©2016 WT SHADE

FASCIA

AVAILABLE C OLOR S: Content:
A l u m i n u m A l l oy 6 0 61-T6
{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com White Ivory Clear Bronze B l a c kBP052RM-BP002H FASCIA P r e - C o n s u m e rH200PB-MR250PB FASCIA C o n t e n t : ≤ 6 5 %
-10 -04 Ano -50 - 9 0 REVOC KCAB Post- Consu mer Content: ≤ 25%
-85

uuStandard Available Length: 18’ (216”)
H300S-H100PB FASCIA

u u C a n b e p r e c u t to s p e c i f i e d s i ze s o r s h i p p e dH200S FASCIA BP001H-S003H i n f u l l l e n g t h p i e c e s .
H100S FASCIA REVOC KCAB REVOC KCAB S002H REVOC KCAB S001H

3” FASCIA

Part # FH30-XX* COMPATIBLE WITH: Part # RH30-XX*
APPLICATI ON S : APPLICATI ON S :
Regular Roll- Front 3” H 1 0 0BP052RM-BP002H ® 3” Regular Roll- Rear
Reverse Roll- Rear REVOC KCAB H200PB-MR250PB FASCIA Reverse Roll- Front

H100 TANDEM ®

H300S-H100PB FASCIA

H200S FASCIA BP001H-S003H REVOC KCAB S002H REVOC KCAB S001H
REVOC KCAB

3 . 5 ” F A S C I A H100S FASCIA COMPATIBLE WITH:

Part # FH35-XX* H200 ® Part # RH35-XX*
APPLICATI ON S : APPLICATI ON S :
Regular Roll- Front 3½” H 2 0 0 T A N D E MBP052RM-BP002H ® 3½” Regular Roll- Rear
Reverse Roll- Rear REVOC KCAB ® Reverse Roll- Front
M R 1 5 0H200PB-MR250PB FASCIA

MR150 TANDEM ®

H300S-H100PB FASCIA BP001H-S003H REVOC KCAB S002H REVOC KCAB S001H
REVOC KCAB

4 . 5 ” F A S C I AH100S FASCIAH200S FASCIA

COMPATIBLE WITH:

Part # FH45-XX* H100 PIGGYBACK ® Part # RH45-XX*
A P P L I C AT I O N S : 49⁄16” APPLICATI ON S :
Regular Roll- Front H300 ® 49⁄ 16” Regular Roll- Rear
Reverse Roll- Rear Reverse Roll- Front
MR250 ®

MR250 TANDEM ®

H200PB-MR250PB FASCIA BP052RM-BP002H
REVOC KCAB
7” FASCIA

H300S-H100PB FASCIA

H200S FASCIA BP001H-S003H REVOC KCAB S002H REVOC KCAB S001H
REVOC KCAB
H100S FASCIA

Part # FH70-XX* COMPATIBLE WITH: Part # RH70-XX*
APPLICATI ON S :
APPLICATI ON S : 615⁄ 16” H200 PIGGYBACK ® 615⁄ 16” Regular Roll- Rear
Regular Roll- Front MR150 PIGGYBACK ® Reverse Roll- Front
Reverse Roll- Rear MR250 PIGGYBACK ®

® To download individual data sheets on these accessories and more, please visit W TShade.com.

E2 V1 ©2016 WT SHADE *Replace “XX” with desired color number when ordering.
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M

SHADING ENCLOSURES {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com

Shades are wonderful when we need them, but when not in use, wouldn’t it be nice
if they could be hidden from sight? Well, they can! WT Shade offers a variety of
options for Shade Enclosures which allow you to create a fully encased
area for your shades to roll-up inside. Shade Enclosures include
Shade Pockets, Bottom Closures and Closure Mounts.
Shade Pockets come in various sizes and are
compatible with all of our Shading Systems and Light
Blocking Accessories. Made of lightweight extruded
aluminum or galvanized steel, Shade Pockets are
available with or without Tile Support and can be
installed above or below the ceiling line.
Bottom Closure is a small flap
that can be added to the bottom
of a pocket to completely
conceal the Shading System
components from view. Requiring
no tools to install, Bottom
Closure simply hooks on to the
bottom of the Shade Pocket.

Pocket End Caps Building your own gypsum
are available for or sheet-rock pocket?
the ends of Shade Installing Closure Mount
Pockets and may be inside your construction
installed in below provides a place for Bottom
ceiling applications Closure to hook right onto.
to create a clean, Like Shade Pocket, our
finished look while Closure Mount is available
also concealing with or without Tile Support.
the exposed shade
hardware.

The above illustration is for illustrative purposes and may not represent the products in real life scenarios. Color ®
Accuracy is not guaranteed in print or on screen.
E3
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M V1 ©2016 WT SHADE

SHADING ENCLOSURES

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com AVAILABLE C OLOR S: 5”X 5” POCKET Content:
A l u m i n u m A l l oy 6 0 61-T6
White Pre-Consumer Content:≤ 65%
-10 Post- Consumer Content: ≤ 25%

uuStandard Available Length: 10’ (120”)

uuCan be precut to specified sizes or shipped in full length pieces.

uuCompatible End Cap: CPE55-10 ¾” 5”
5”

COMPATIBLE SHADING SYSTEMS:

H100 ®

5” H100 SLIM

H200 ®

H200 SLIM 5”

MR150 ®

MR150 SLIM

Part #CP55-10 MR250 SLIM Part #CP55TS-10
5”x 5” Pocket 5”x 5” Pocket

POCKET END CAPS with Tile Support

Pocket End Caps can be attached to the end of a Shade Pocket, creating
a clean finished look while concealing exposed hardware.
Part #CPE55-10
End Cap for CP55-10 & CP55TS-10

AVAILABLE C OLOR S: Content:
20 gauge galvanized 1018 CRS
Mill 6”X 9” POCKET steel, with Closure Mount (#CM or
Finish #CMTS) secured using Rivets.
-99
1”
uuStandard Available Length: 10’ (120”) 6”

uuRecommended for above ceiling installations.

6”

COMPATIBLE SHADING SYSTEMS:

H200 PIGGYBACK ®

MR150 PIGGYBACK ®

9” MR250 PIGGYBACK SLIM 9”

Part #CP69-99 Part #CP69TS-99
6”x 9” Pocket 6”x 9” Pocket

® with Tile Support

To download individual data sheets on these accessories and more, please visit W TShade.com.

E4 V1 ©2016 WT SHADE LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M

SHADING ENCLOSURES

AVAILABLE C OLOR S: BOTTOM CLOSURE Content: {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com
A l u m i n u m A l l oy 6 0 61-T6
White Pre-Consumer Content:≤ 65%
-10 Post- Consu mer Content: ≤ 25%

uuStandard Length Available: 10’ (120”)
uuCan be precut to specified sizes or shipped in full length pieces.

Part #CC2-10 Part #CC3-10
2” Bottom Closure 3” Bottom Closure

2” 3”

Part #CC5-10
5” Bottom Closure

5”

AVAILABLE C OLOR S: CLOSURE MOUNT Content:
A l u m i n u m A l l oy 6 0 61-T6
White Pre-Consumer Content:≤ 65%
-10 Post- Consu mer Content: ≤ 25%

uuStandard Length Available: 10’ (120”)

uuCan be precut to specified sizes or shipped in full length pieces.

2½” 2½”

1”

Part #CM-10 Part #CMTS-10
Closure Mount Closure Mount
with Tile Support

To download individual data sheets on these accessories and more, please visit W TShade.com.

LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M V1 ©2016 WT SHADE ®

E5

LIGHT BLOCKING ACCESSORIES

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.comA little bit of light peeking through theCenter Channels
edge of a shade can be like a spotlight can be installed
SIDE CHANNELin a dark room, especially if you are between two shades
CENTER CHANNELsleeping! By adding any of our Light or shade bands to
Blocking Accessories, which can be used eliminate the gap
with any of our shading systems, you between them.
can rest easy by combating those nasty, Side Channels and
little light leaks. These accessories can Center Channels
be used in combination with any of our are both available
Shade Pockets, Bottom Closures or in two sizes and five
Fascia options to create a more complete colors each, allowing
light blocking or blackout solution. you to choose the
perfect fit for your
space.

Side All Light Blocking
Channels can be installed Acc essories are
along the sides of a shade to prevent compatible with our
light from entering through the edges Sealed Hembar or
of a shade. Side Channels wrap the External Hembar,
edge of the fabric and Hembar so and can be added
they can freely ride inside as the at installation or
shade is in motion. any time in the
When ordered with a shading system, future!
Side Channels and Center Channels
will include our original Top Caps that
protect the fabric from the sharp
edges at the top of the channels.
These Top Caps, which you can
only find at WT Shade®, are color
coordinated based on the selected
aluminum finish color.

SILL CHANNEL

Sill
Channel is the optimal way of
eliminating those frustrating light gaps at the bottom of your
shades. All Side Channels and Center Channels fit neatly in our Sill Channels,
giving you the perfect corner every time!

®

The above illustration is for illustrative purposes and may not represent the products in real life scenarios.
Color Accuracy is not guaranteed in print or on screen.

E6 V1 ©2016 WT SHADE LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M

LIGHT BLOCKING ACCESSORIES

AVAILABLE C OLOR S: Content: {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com
A l u m i n u m A l l oy 6 0 61-T6
White Ivory Clear Bronze Black SIDE CHANNELS Pre-Consumer Content:≤ 65%
-10 -04 Ano -50 -90 Post- Consu mer Content: ≤ 25%
-85

1” uuStandard Available Length: 18’ (216”)
1½” uuCan be precut to specified sizes or shipped in full

Part # SCH15-XX* length pieces.
1½” Side Channel uuCan be Face Mounted using hole plugs (SCHP-XX*).
uu To p ca p is a va i l a b l e i n W h ite (-10) a n d B l a ck (-9 0)

and will be color coordinated to the selected
aluminum color when ordered with a shading system
(SCHTC15-XX* or SCHTC25-XX*)**

1” COMPATIBLE WITH:
2½” Sealed Hembar (SSP-99)
External Hembar (HBX-XX*)
Part # SCH25-XX*
2½” Side Channel

AVAILABLE C OLOR S: CENTER CHANNELS Content:
A l u m i n u m A l l oy 6 0 61-T6
White Ivory Clear Bronze Black Pre-Consumer Content:≤ 65%
-10 -04 Ano -50 -90 Post- Consu mer Content: ≤ 25%
-85

uuStandard Available Length: 18’ (216”)
uuCan be precut to specified sizes or shipped in full length pieces.
uuCan be Face Mounted using hole plugs (SCHP-XX*).
uu Top ca p is ava ila ble in w hite a n d black a n d w ill be co lor coordinated to th e

selected aluminum color when ordered with a shading system (SCHTC15-XX* or
S C H TC 2 5 -X X * ) * *
uuFor Multibanded Shades and applications where two shades meet bracket to bracket.

COMPATIBLE WITH:
Sealed Hembar (SSP-99)
External Hembar (HBX-XX*)

1” 1”

3” 5”
Part # SCHC3-XX Part # SCHC5-XX
3” Center Channel 5” Center Channel

To download individual data sheets on these accessories and more, please visit W TShade.com.

*Replace “XX” with desired color number when ordering. V1 ©2016 WT SHADE ®
**See E8 for more information.
E7
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M

LIGHT BLOCKING ACCESSORIES

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com AVAILABLE C OLOR S: Content:
A l u m i n u m A l l oy 6 0 61-T6
White Ivory Clear Bronze Black SILL CHANNEL Pre-Consumer Content:≤ 65%
-10 -04 Ano -50 -90 Post- Consu mer Content: ≤ 25%
-85

uuStandard Available Length: 18’ (216”) 1”
uuCan be precut to specified sizes or shipped in full length pieces.
uuCompatible with all Side or Center Channels.

COMPATIBLE WITH: 1”
Sealed Hembar (SSP-99) Part # SCH10-XX*
External Hembar (HBX-XX*)
1” Sill Channel

AVAILABLE C OLOR S: LIGHT STOP ANGLE Content:
A l u m i n u m A l l oy 6 0 61-T6
White Clear Pre-Consumer Content:≤ 65%
-10 Ano Post- Consu mer Content: ≤ 25%
-85

uuStandard Available Length: 18’ (216”)
uuCan be precut to specified sizes or shipped in full length pieces.

COMPATIBLE WITH: 2”
Sealed Hembar (SSP-99)
External Hembar (HBX-XX*) 1”
Round External Hembar (HBXR-XX*) Part # LS12-XX*
Round Internal Hembar (HBNR-85) 1” x 2” Light Stop Angle
Heavy Duty External Hembar (HBXHD-10)
Dual Shade Hembar (HBD-99)

TOP CAPS SIDE & CENTER CHANNEL ACCESSORIES
HOLE PLUG

TOP CAP COLOR AVAILABLE C OLOR S:
C O ORD INATI ON C HA R T

If Aluminum Top C ap REV White Iv-Do0ESr4CyRIPTIC-OA8leNna5or Bronze ABPPlaRcOkVED DATE
.240±.010 c o l o r i s : color will be: -10 -50 -90
White (-10)
A .526 .080

.500 Part #SCHTC15-XX* White (-10)
Top C ap for 1½” Sid e
& 3” Center Channels Ivory (-04) White (-10)

Clear Ano (-85) White (-10)

A Pa r t #.S69C8±H.01T0 C 2 5 - X X * B r o n.0z6e0±.0(1-05 0 ) Black (-90) Part #SCHP-XX*
½” Hole Plug
SECTION A-A
To p C a p fo r 2 ½ ” S i d e SCALE 2 : 1
& 5” Center Channels Black (-90) Black (-90) for Face Mount Applications

To download individual data sheets on these accessories and more, please visit W TShade.com.

® *Replace “XX” with desired color number when ordering.
LLI MI MI TI TAATTI OI ONNSSMMAAYYAAPPPPLLYY. . S E E T E R M S A N D C O N D I T I O N S AT W T S H A D E .C O M
E8 V1 ©2016 WT SHADE

GUIDE SYSTEMS {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com

A shade mounted in an area that is completely perpendicular to the
floor will use gravity to assist the shade on its path up and down.

Certain facades, however, may have windows that slope...
... a n d may requ ire a ss is t a n c e fro m o u r G u id e Tra ck o r C abl e Sys t ems .

TtsTrrphaaeeccckkCi.aliaSsll yshasodliswceonsGicughoniedmeredepTaWwrtaiihbtcehlkeeiolsweuadirthsHEiemxomtuperblrenaH, arenlEaoHnv-yndeomCDnabusptaeysrn,EtsthexhatseetorrClniudlataeilsoHisnniescumidtGibeluiaztiidrhn.eeg

ETtChrxoaetmecbrkbneianpnleirnHofgivetsimdthoebefsaalritg,GhtheuhtiidssbetteroSsaptycpskoitnaefglmsbop,oroutoushpreesowrnWoteirel-hdsoesfeo.-lfaeC-adokmHiSneipddmaeBtbliabCaclhrekaEonnwundtiteGhCl auwtpihditseeh.

CLASSIC GUIDE TRACK sfcFeloooamprteuepdrxaettmrsibaotletwlaoorwrgiziwetehhdseohseuahlrdsaeHdoseen,asoevouayrrcDehHvueEetanynvdlHyaCerDgamuepbtsyaakrnGy.dluiTgiihdhsitesidsTsheryaaasdlctekefomsirs.
BLACKOUT GUIDE TRACK
H EAV Y DU T Y GU ID E T RAC K waEsOtoixtutlhaurenttrliyownowanot il-mwpfHoeraero,ymfbssi lbeletofaopoGrreauetdtihtdoai wsercihCanv edfattrhobesewlraescti Kn.ial esibFttloaekpriltrltaoostcvhiatoiadhnndee, esbaHseanedwmodircitbsdohacemrrroe.eeuedsrt
GUIDE CABLE KIT

The above illustration is for illustrative purposes and may not represent the products in real life scenarios. ®
Color Accuracy is not guaranteed in print or on screen.
E9
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M V1 ©2016 WT SHADE

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com GUIDE SYSTEMS CLASSIC GUIDE TRACK Content:
A l u m i n u m A l l oy 6 0 61-T6
AVAILABLE C OLOR S: Post Consumer Content: ≤ 25%
Pre Consumer Content:≤ 65%
White
-10

COMPATIBLE WITH:

13⁄16” uuStandard Available
Length: 18’ (216”)
15⁄16”
Part #GTC-10 uuCan be precut to
specified sizes
or shipped in full
length pieces.

E x t e rna l Hem ba r Heavy Duty External Hembar
with Single Wheel with Double Wheel
E nd C a p s ( HC SW - X X * ) End Caps (HCWHD-10)

AVAILABLE C OLOR S: Content:
A l u m i n u m A l l oy 6 0 61-T6
White BLACKOUT GUIDE TRACK Post Consumer Content: ≤ 25%
-10 Pre Consumer Content:≤ 65%

COMPATIBLE WITH:

13⁄16” uuStandard Available
Length: 18’ (216”)
21⁄2”
Part #GTB-10 uuCan be precut to
specified sizes
or shipped in full
length pieces.

External Hembar
with Single Wheel
End Caps (HCSW-XX*)

AVAILABLE C OLOR S: Content:
A l u m i n u m A l l oy 6 0 61-T6
White H EAVY DUTY GUIDE TRACK Post Consumer Content: ≤ 25%
-10 Pre Consumer Content:≤ 65%

COMPATIBLE WITH:

21⁄16” uuStandard Available
Length: 18’ (216”)
21⁄2”
Part #GTHD-10 uuCan be precut to
specified sizes
or shipped in full
length pieces.

Heavy Duty External Hembar
with Double Wheel

End Caps (HCWHD-10)

To download individual data sheets on these accessories and more, please visit W TShade.com.

® *Replace “XX” with desired color number when ordering.
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M
E10 V1 ©2016 WT SHADE

GUIDE SYSTEMS

GUIDE CABLE KIT {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com

Part #CKGW

uu To be used ver tica lly a long th e side or u p th e back
of the shade.

uuCan be ceiling mounted or wall/jamb mounted using
the provided bracket clips.

uuCan be ordered at any time and retrofit to all shades
u ti l izi n g o u r E x ter n a l H em b a r.

COMPATIBLE WITH: Kit includes:
Two (2) pairs of Barrels and Studs
for mounting (1” and 1/2”)

Two (2) pa irs (w hite & black)
of Guide Cable End Caps for
External Hembar for side
mounting cables.

External Hembar Two (2) pa irs (w hite & black) of
with Guide Cable End Caps Guide Cable Clips for External
Hembar for back mounting
HCGC-XX* cables.
Two (2) 20’ leng ths of Sta in less
Steel Cable.

IDLE CABLE SUPPORT KIT

Part #CKIS

uu To be used hor izonta lly acros s the sha dein order to len d su ppor t to sag g ing fa br ic in
sloped scenarios or to prevent billowing.

uuCan be ordered at any time and retrofit to any shade system.

uuCan be Wall or Jamb mounted. COMPATIBLE WITH:
uuCombine as many as necessary! All Shading Systems
All Hembars
Kit includes:
One (1) pair of Barrels and Studs for mounting.

One (1) 10’ length of Stainless Steel Cable.

Four (4) Clear Cable Sleeves for fabric protection (2 1/2’ each).

To download individual data sheets on these accessories and more, please visit W TShade.com.

*Replace “XX” with desired color number when ordering. V1 ©2016 WT SHADE ®
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M
E11

HEMBAR STYLES

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com At WT
Shade®
SEALED HEMBAR the sky is
EXTERNAL HEMBAR the limit
ROUND EXTERNAL HEMBAR when it
ROUND INTERNAL HEMBAR comes to
HEAVY DUTY EXTERNAL HEMBAR customizing
DUAL SHADE HEMBARyour shades. We
offer a variety of
Hembar styles to
choose from allowing
you to add the
perfect finishing
touch to your space.
Our subtle internal style
Hembars, like the standard
Sealed Hembar and the Round
Internal Hembar, are wrapped
with the fabric of the shade
and blend right in.
Our eye-catching, exposed aluminum
Hembars, like the External Hembar,
Round External Hembar and Heavy
Duty External Hembar, offer a bolder
aesthetic by allowing you to add an
aluminum finish color to your shade,
perhaps matching fascia or other
finishes in the space.
The unique Dual Shade Hembar even allows
you to have two different fabrics on the same
shade and utilize the properties of both at the
same time!
Finally, using certain Hembars may be necessary
in order to add additional accessories to your
s had e, such as Gu id e Tra ck or C ab l e Sys t em s ,
which require specialty Hembar End Caps.

®

The above illustration is for illustrative purposes and may not represent the products in real life scenarios.
Color Accuracy is not guaranteed in print or on screen.

E12 V1 ©2016 WT SHADE LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M

AVAILABLE C OLOR S: SEALED HEMBAR HEMBAR STYLES {T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com

Mill Style # SSP-99 Content:
Finish A l u m i n u m A l l oy 6 0 61-T6
Pre-Consumer Content:≤ 65%
-99 Post- Consu mer Content: ≤ 25%

uuThe standard style Hembar for all COMPATIBLE WITH THE
Shading Systems, unless otherwise FOLLOWING ACCESSORIES:
requested. All Side Channels
Sill Channels
uuSteel Hembar may be used when All Center Channels
more weight is necessary. Light Stop Angle

AVAILABLE C OLOR S: EXTERNAL HEMBAR Content:
A l u m i n u m A l l oy 6 0 61-T6
White Ivory Clear Bronze Black Style # HBX-XX* Pre-Consumer Content:≤ 65%
-10 -04 Ano -50 -90 Post- Consu mer Content: ≤ 25%
-85

uuMaximum Available Length: 18’ (216”). COMPATIBLE WITH THE
uuIncludes End Caps, which are available FOLLOWING ACCESSORIES:

i n W h ite (-10) as sh ow n, o r B l a ck (-9 0) All Side Classic Guide
and will be color coordinated based Channels Tr a c k
o n a l u m i n u m f i n ish co l o r.
Sill Channels Blackout
Standard End Caps: HCEXT-XX* All Center G ui d e Tr a c k
uuOptional internal weights available. Channels Guide Cable
Light Stop Kit
Angle Shade Hold-
Down

AVAILABLE C OLOR S: ROUND Content:
EXTERNAL HEMBAR A l u m i n u m A l l oy 6 0 61-T6
White Clear Black Pre-Consumer Content:≤ 65%
-10 Ano -90 Style # HBXR-XX* Post- Consu mer Content: ≤ 25%
-85

uuMaximum Available Length: 18’ (216”). COMPATIBLE WITH THE
uuIncludes End Caps, which are available FOLLOWING ACCESSORIES:
Light Stop Angle
i n W h ite (-10) as sh ow n, o r B l a ck (-9 0)
and will be color coordinated based
o n a l u m i n u m f i n ish co l o r.

Round End Caps: HCER-XX*

AVAILABLE C OLOR S: ROUND Content:
INTERNAL HEMBAR A l u m i n u m A l l oy 6 0 61-T6
Clear Pre-Consumer Content:≤ 65%
Ano Style # HBNR-85 Post- Consu mer Content: ≤ 25%
-85

uuMaximum Available Length: 18’ (216”). COMPATIBLE WITH THE
uuIncludes End Caps, which are available FOLLOWING ACCESSORIES:
Light Stop Angle
i n W h ite (-10) as sh ow n, o r B l a ck (-9 0)
and will be color coordinated based
o n fa b r i c* * co l o r.

Round End Caps: HCER-XX*

To download individual data sheets on these accessories and more, please visit W TShade.com.

*Replace “XX” with desired color number when ordering. V1 ©2016 WT SHADE ®
**See Color Coordination Guide for more information.
LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M E13

{T} 877.294.3580 • {F} 51 6.294.0444 • {E} [email protected] • 77 S econd Avenue • Garden City Park, New York 11040 • www.WTShade.com HEMBAR STYLES H E AVY D UT Y Content:
EXTERNAL HEMBAR A l u m i n u m A l l oy 6 0 61-T6
AVAILABLE C OLOR S: Pre-Consumer Content:≤ 65%
Style # HBXHD-10 Post- Consu mer Content: ≤ 25%
White
-10

uuMaximum Available Length: 18’ (216”). COMPATIBLE WITH THE
uuIncludes HD End Caps: HCHD-10 FOLLOWING ACCESSORIES:
uuOptional internal weights available. Light Stop Angle

C l a ssi c G ui d e Tra ck

He av y D ut y G ui d e Tra c k

AVAILABLE C OLOR S: DUAL SHADE HEMBAR Content:
A l u m i n u m A l l oy 6 0 61-T6
Mill Pre-Consumer Content:≤ 65%
Finish Style # HBD-99 Post- Consu mer Content: ≤ 25%

-99

uuMaximum Available Length: 18’ (216”) COMPATIBLE WITH THE
uuIncludes End Caps, which are avail- FOLLOWING ACCESSORIES:
Light Stop Angle
a b l e i n W h ite (-10) as sh ow n, o r
B l a ck (-9 0) a n d w i l l be co l o r co o rd i-
n a ted b a s ed o n fa b r i c* * co l o r.
Dual Shade End Caps: HCDU-XX*.

uuAllows for two fabrics to be mounted
on one roller tube.

HEMBAR ACCESSORIES

HEMBAR END CAPS WT Shade External SHADE HOLD-DOWN
Hembar and Round External Hembar styles Part # HBHD
include Hembar End Caps which are available The Shade Hold-Down can be used
i n W h ite (-10) o r B l a ck (-9 0) a n d w i l l be to hold the Hembar in place when the
color coordinated based on the selected shade is fully extended. Compatible with
a l u m i n u m f i n ish co l o r. If you require a different External Hembar only.
combination, please contact WT Shade at the
time of order.

A LUMINUM C OLOR C OORD INATI ON C HA R T

If Aluminum color is: End Cap color will be:

White (-10) White (-10)

Ivory (-04) White (-10)

Clear Anodized (-85) White (-10)

Bronze (-50) Black (-90)

Black (-90) Black (-90)

® To download individual data sheets on these accessories and more, please visit W TShade.com.

E14 V1 ©2016 WT SHADE *Replace “XX” with desired color number when ordering.
**See Color Coordination Guide for more information.

LI M ITATI O N S M AY A PPLY. S EE T ER M S A N D CO N D ITI O N S AT W TS H A D E .CO M