The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

Simmons, Eric A.; Hayes, Steven W.; Morgan, Todd A.; Keegan, Charles E., III; Witt, Chris. 2014. Idaho’s forest products industry and timber harvest 2011 with ...

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by , 2016-10-22 20:08:03

Idaho’s Forest Products Industry and Timber Harvest 2011 ...

Simmons, Eric A.; Hayes, Steven W.; Morgan, Todd A.; Keegan, Charles E., III; Witt, Chris. 2014. Idaho’s forest products industry and timber harvest 2011 with ...

United States Department of Agriculture

Idaho’s Forest Products Industry and
Timber Harvest 2011 with Trends
Through 2013

Eric A. Simmons, Steven W. Hayes, Todd A. Morgan,
Charles E. Keegan, III, and Chris Witt

Forest Service Rocky Mountain Research Station Resource Bulletin RMRS-RB-19 November 2014

Simmons, Eric A.; Hayes, Steven W.; Morgan, Todd A.; Keegan, Charles E., III; Witt, Chris. 2014. Idaho’s forest products
industry and timber harvest 2011 with trends through 2013. Resour. Bull. RMRS-RB-19. Fort Collins, CO: U.S.
Department of Agriculture, Forest Service, Rocky Mountain Research Station. 46 p.

Abstract

This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the
structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood prod-
ucts industry trends are discussed, as well as changes in harvest, production, employment, and sales.

Keywords: forest economics, mill residue, timber processors, wood utilization

Authors

Eric A. Simmons is a Research Associate, Steven W. Hayes is a Research Forester, Todd A. Morgan is
the Director of Forest Industry Research, and Charles E. Keegan, III, is Director Emeritus Forest Industry
Research at the Bureau of Business and Economic Research, University of Montana, Missoula, Montana.

Chris Witt is an Ecologist, U.S. Department of Agriculture, Forest Service, Rocky Mountain Research
Station, Forest Inventory and Analysis Program, Boise, Idaho.

You may order additional copies of this publication by sending your mailing informa-
tion in label form through one of the following media. Please specify the publication
title and series number.

Publishing Services

FAX: (970) 498-1212

Email: [email protected]

Website: http://www.fs.fed.us/rm/publications

Mailing address: Publications Distribution
Rocky Mountain Research Station
240 West Prospect Road
Fort Collins, CO 80526

RMRS posted link:  http//www.fs.fed.us/rm/pubs/rmrs_rb019.html

*RMRS publications are also listed on Treesearch at:  http://www.treesearch.fs.fed.us/

Highlights

• A total of 88 Primary wood facilities were identified as active in Idaho dur-
ing 2011:

• 27 Sawmills

• 2 Plywood / veneer plants

• 16 Log home facilities

• 18 Residue related products facilities

• 8 Cedar product manufacturers

• 17 Post, pole, and log furniture producers

• Idaho’s total timber harvest in 2011 was 1.07 billion board feet Scribner,
more than 40 percent higher than the 2009 record low harvest, and approxi-
mately 5 percent lower than the pre-recession timber harvest volumes of
2006 and 2007.

• Timber harvest from non-industrial private timberlands fell from 31 percent
of the total harvest in 2006 to just 12 percent in 2011. Public lands contrib-
uted 42 percent of the harvest in 2011 compared to 26 percent in 2006. State
lands accounted for more than 30 percent of the 2011 harvest and National
Forests accounted for almost 10 percent.

• Saw and veneer logs comprised over 88 percent of the total harvest. Clear-
water, Benewah, Shoshone, and Latah counties were the largest contribu-
tors to the state’s total harvest in 2011, accounting for 60 percent of total
harvest volume.

• Idaho sawmills recovered an average of 1.67 board feet lumber tally per
board foot Scribner of input, representing the first decline in sawmill over-
run in 40 years. Idaho’s 27 active sawmills produced 1.4 billion board feet
of lumber during 2011.

• Idaho sawmills with a production capacity of over 50 Million Board Feet
Lumber Tally (MMBF) annually accounted for 86 percent of Idaho’s lum-
ber production in 2011 compared to 94 percent in 2006 and just 39 percent
in 1995.

• Idaho’s primary forest products industry shipped products valued at $1.4
billion (fob the producing mill) in 2011. Lumber and plywood/veneer con-
tributed 36 percent of total sales while residue related products such as pulp
and paper, particleboard, and other products represented 56 percent.

• Sawmills, along with plywood and veneer facilities, generated over 1.14
million bone-dry units (bdu) of wood residue during 2011 of which more
than 99 percent was utilized.

• Idaho’s log home industry was severely impacted by the Great Recession
and U.S. housing bust of 2007-2009, and slow economic recovery since
then. Log home sales during 2011 were down about 80 percent from 2006
levels, and timber use by Idaho’s log home sector was down nearly 90 per-
cent.

i

Contents

Highlights....................................................................................................................... i

Introduction................................................................................................................... 1
Forest Industries Data Collection System..................................................................... 1
The Operating Environment of Idaho’s Forest Products Industry................................. 2

Idaho’s 2011 Timber Harvest, Products, and Flow........................................................... 3
Harvest Trends 1947 through 2013.............................................................................. 4
Harvest by Geographic Source...................................................................................... 5
Harvest by Ownership and Product Type..................................................................... 8
Harvest by Species........................................................................................................ 10
Species Composition of Product Types......................................................................... 11
Movement of Timber Products..................................................................................... 12
End Uses of Idaho’s Timber.......................................................................................... 15

Structure of Idaho’s Forest Products Industry................................................................. 17
Structure and Location................................................................................................. 17
Sales Value of Primary Wood Products......................................................................... 20
Timber Received by Idaho Mills.................................................................................... 21
Sawmill and Plywood/Veneer Sector............................................................................ 23
Residue-Related Products Sector.................................................................................. 28
Other Primary Manufacturers...................................................................................... 28

Plant Capacity................................................................................................................ 30
Sawtimber Capacity and Utilization by Sector.............................................................. 31

Markets for Primary Wood Products............................................................................... 33
Market Areas by Finished Product Type....................................................................... 36

Mill Residue: Types, Quality, and Use............................................................................. 36
Sawmill and Veneer/Plywood Residue......................................................................... 37
Residues from Other Manufacturers............................................................................ 40

The Forest Products Industry and the Idaho Economy..................................................... 40
Trends in Forest Products Employment and Workers Earnings.................................... 41

Idaho’s Forest Industry Outlook 2014............................................................................. 44

References..................................................................................................................... 45

ii

Introduction

The purpose of this report is to describe the utilization of Idaho’s 2011 timber
harvest and the conditions, structure, and operations of the state’s primary forest
products industry. Primary forest products manufacturers are firms that process
timber into manufactured products such as lumber, and facilities, such as pulp and
paper mills and particleboard plants, that use the wood fiber residue directly from
timber processors. This report also describes recent and historical trends in the
state’s timber use including raw material sources, inventory, growth, and harvest.
Other areas covered in the report include the extent and efficiency of Idaho’s pro-
cessing infrastructure and the volume and value of finished products and residues.

Information in this report is primarily generated through a statewide periodic
census of Idaho’s manufacturers of primary forest products. The mill census also
includes firms in adjacent states utilizing raw material from Idaho during the 2011
calendar year. Although great effort is made to collect data from every primary
facility that operated during a census year, facilities may be added in subsequent
surveys. Wherever appropriate, data from previous reports have been updated to
make comparisons with new results.

This census is conducted in cooperation with the University of Montana’s
Bureau of Business and Economic Research (BBER) and the USDA Forest Service,
Interior West Forest Inventory and Analysis (IW-FIA) program.

The 2011 report focuses primarily on changes since the 2006 mill census with
updated information through 2013 where available. Important relationships of cur-
rent data to findings prior to 2006 have been noted. For a more detailed discussion
of historic trends in timber harvesting and processing for Idaho see “Idaho’s Forest
Products Industry and Timber Harvest, 2006” (Brandt and others 2012).

Forest Industries Data Collection System

The Forest Industries Data Collection System (FIDACS) was developed by the
BBER in cooperation with the FIA programs in the Rocky Mountain and Pacific
Northwest research stations to collect, compile, and report data from primary for-
est products manufacturers.

Primary forest products firms were identified through the use of various phone
directories, industry associations, internet searches, and through previous census-
es. The written questionnaires were distributed by mail, fax, or email and were
administered over the telephone when necessary. A single questionnaire was com-
pleted for each processing facility and includes the following information:

• Plant production, capacity, and employment
• Volume of raw material received by County, ownership, and product type
• Species mix and proportion of standing dead timber received
• Finished product volumes, types, sales value, and market locations
• Utilization and marketing of manufacturing residue

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 1

Similar forest products industry censuses have been conducted periodically
in the Pacific Coast and Rocky Mountain States for over 30 years by the BBER
and Forest Service research stations. Previous FIDACS censuses were completed
for Idaho in 1979, 1980, 1985, 1990, 1995, 2001, and 2006 (Godfrey and others
1980; Keegan and others 1982, 1988, 1992, and 1997; Morgan and others 2004;
Brandt and others 2012). Information collected through FIDACS is stored at the
University of Montana’s BBER. Additional information is available by request;
however, individual firm-level data are confidential and will not be released.

The Operating Environment of Idaho’s Forest Products Industry

The last application of the FIDACS in Idaho detailed industry operations dur-
ing 2006, which marked the end of several years of very high housing starts and
record consumption of wood products in the United States (Woodall and others
2012). High housing and wood products demand were fueled not just by a strong
economy, but by easy credit and rampant speculation in housing markets, which
led to a frantic building pace in 2004 and 2005. With growing recognition of a
housing bubble, housing markets began to decline, the inventory of unsold homes
grew, new home construction slowed, and house prices began a downward spi-
ral, ultimately resulting in the most difficult economic conditions since the Great
Depression of the 1930s.

The collapse in home prices in the United States, and ultimately throughout
the world, created a cataclysm in the subprime mortgage market and exposed the
weakness of debt instruments backed by these mortgages. The loss in confidence
in the debt instruments collateralized by mortgages bankrupted a number of major
investment banks and was the catalyst for a global financial crisis in the last half
of 2008. While a total breakdown of the global financial system was averted, the
impacts on housing markets in the United States and many other countries were
devastating.

Annual U.S. housing starts fell from almost 2.1 million units in 2005 to
554,000 units during 2009, their lowest level in more than six decades (fig. 1).
Associated with the housing collapse was an official recession—often termed the
“Great Recession”—that officially lasted from December of 2007 to June of 2009
(NBER 2010), but the impacts on home construction and demand for lumber and
other wood products continued into 2010 and beyond. The challenging economic
conditions experienced by the forest products industry in 2009 improved only
slightly during 2010 and 2011. Housing starts in the United States grew by less
than 6 percent during 2010 and 2011, and remained among the lowest levels since
annual housing starts began being reported in the 1950s. Lumber consumption in
the United States remained at historically low levels.

Through much of 2012, the economy grew slowly with lackluster recovery in
housing and demand for wood products. Wood product markets in late 2012 and
2013 reflected the potential upside but also the uncertainty and volatility of recov-
ering markets. As housing starts increased more than expected in the fourth quarter
of 2012 and first quarter of 2013, lumber prices responded, reaching a high of over
$435 per MBF lumber tally in March and April 2013, the highest since 2006 and an
increase of about $100 per MBF from the second quarter 2012 (Random Lengths

2 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Figure 1—United
States housing
starts 1980-2013
(source: U.S.
Census Bureau
2013).

1976-2013). Mills throughout North America geared up and increased production
by bringing recession-idled capacity back into operation. The additional supply
of lumber and a mid-year cooling of the U.S. housing market drove lumber prices
down, hitting a 2013 low of $330 per MBF in June.

Lumber prices climbed steadily during late summer and fall 2013, approaching
$400 per MBF in the fourth quarter of 2013. Domestic demand for wood products
through new construction, as well as repairs and remodeling continued upward
and international markets were somewhat stronger than expected. Wood products
markets in 2014 are expected to continue to improve, but with uncertainty in the
domestic and international markets and considerable unutilized capacity to pro-
duce lumber in North America, wood products prices are expected to increase but
remain volatile.

Idaho’s 2011 Timber Harvest, Products, and Flow

Idaho Timberlands—About 40 percent of the total land area in Idaho is
forestland. Just over 3 million acres of Idaho forestland are reserved through
statute or administrative designation such as National Forest Wilderness areas
and National Parks and Monuments, and not available for timber production. In
2011, Idaho had slightly less than 17 million acres of nonreserved timberlands
available for timber production (USFS2011). The USDA Forest Service’s National
Forest System (NFS) is responsible for the administration of 72.8 percent of
the state’s timberlands (table 1). The remaining timberlands are divided among
nonindustrial private owners, including tribal (9.0 percent), industrial private lands
(7.7 percent), state endowment lands managed by the Idaho Department of Lands
(IDL) (6.7 percent), Federal Bureau of Land Management (BLM) (3.7 percent),
and other public ownership (0.2 percent).

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 3

Table 1--Idaho timberland by ownership class. (Source:
FIA, FIDO online tool)

Acres Percentage of
Non-reserved
Ownership class
timberland
National Forest 12,210,340
72.8
Undifferentiated private 2,796,786 16.7

State 1,116,072 6.7
3.7
Bureau of Land Management 616,546 0.2
100 1
Other public 31,915

All owners 16,771,659

1 Total does not not sum to 100 due to rounding

Ownership of industrial private timberlands in Idaho has undergone major
changes in the last 10 years. Nationwide, many large forest products companies
that once sought a high level of vertical integration to reduce operating costs have
converted their corporate structures to real estate investment trusts (REITs) or sold
their timberlands to timberland investment management organizations (TIMOs).
One result is that the FIA program no longer uses the traditional industrial/non-
industrial private ownership classifications, replacing them with corporate/non-
corporate classifications. Together, REITs and TIMOs now control over 1 million
acres of land in Idaho. In addition to managing forests for the sale of timber, REITs
and TIMOs evaluate land parcels for their highest and best uses, including real
estate potential on the open market. Some REITs and TIMOs generate revenue
through the sale of conservation easements and recreation permits to allow access
to timberlands.

Harvest Trends 1947 through 2013

The USDA Forest Service has kept comprehensive annual harvest data by own-
ership in Idaho since 1969. Other sources of information were used to develop
harvest numbers for 1947 through 1969 (fig. 2). Idaho’s timber harvest climbed
after World War II, peaking in1976 at 1.9 billion board feet. During the recession
years of the early 1980s, harvest fell sharply, but rebounded in the last half of the
1980s to an average level of 1.6 billion board feet.

Throughout the 1990s and into the 2000s, Idaho’s total timber harvest declined
steadily because of a dramatic decline in harvest from National Forest lands. In
2001, the National Forest harvest for Idaho was the lowest to date since World
War II and had declined by 629 MMBF (89 percent) from 1990. In 1998, the
harvest volume from other public lands in Idaho surpassed the volume harvested
from Idaho’s National Forests for the first time on record. The volume of tim-
ber harvested from Idaho’s private timberlands remained stable throughout the
1990s and into the new century; however, the proportion of the harvest coming
from private lands increased steadily from 45 percent (732 MMBF) in 1990 to
72 percent (750 MMBF) in 2001 and 74 percent (834 MMBF) in 2006. Harvest
from IDL and other public forest lands has followed a similar trend, with harvest
volumes remaining fairly stable, but the proportion of the total harvest increasing
from 14 percent (259 MMBF) in 1990 to nearly 20 percent (208 MMBF) by 2006.

4 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Figure 2—Idaho’s timber harvest by ownership, 1947 through 2013 (sources: Bureau of Business and Economic Research,
The University of Montana-Missoula; USDA Forest Service Region One, Missoula, Montana).

The Great Recession and dramatic declines in U.S. housing starts drove private
lands timber harvest down steeply in 2008 and 2009. The 2009 total timber harvest
in Idaho was less than 750 MMBF, the lowest since the end of World War II. By
2011, statewide timber harvest had recovered to the pre-recession level of just over
1 billion board feet, aided significantly by the increased sustained yield calculation
and harvesting program on the State of Idaho’s endowment timberlands. Idaho
timber harvests for 2012 and 2013 were similar to the nearly 1.1 billion board feet
harvested in 2011.

Harvest by Geographic Source

From 1979 to 1990, between 76 and 78 percent of Idaho’s total timber harvest
came from north of the Salmon River (table 2). Forests north of the Salmon River
now provide nearly 90 percent of Idaho’s timber harvest. Southern Idaho’s harvest
volumes have dropped dramatically from 440 MMBF in 1979 to 113 MMBF in
2011.

Clearwater County continued to lead the state in timber harvest with 222 MMBF
in 2011—about 21 percent of Idaho’s harvest. Other leading timber-producing
counties were Benewah with 156 MMBF, Shoshone with 137 MMBF, Latah
with 130 MMBF, Bonner with 98 MMBF, Idaho with 88 MMBF, and Kootenai
with 70 MMBF. Together, these seven counties in northern Idaho supplied almost
85 percent of Idaho’s 2011 timber harvest. Valley County had the largest harvest

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 5

in southern Idaho at 47 MMBF, which was 4.4 percent of the state’s total harvest.
Valley, Adams, and Boise counties contributed a combined 9.2 percent of the 2011
total state’s harvest.

Harvest volumes in 2011 for both northern and southern Idaho were lower than
2006 but higher than in 2001. Since 1979, the harvest has declined by 456 MMBF
(32 percent) in northern Idaho and 328 MMBF (75 percent) in southern Idaho.
Compared to 2006, the 2011 harvest was down 2 percent (23 MMBF) in northern
Idaho and 23 percent (32 MMBF) in southern Idaho.

Northern Idaho’s most dramatic county-level changes from 1979 to 2011 oc-
curred in Clearwater and Idaho counties where the combined harvest dropped
by 495 MMBF (67 percent), 370 MMBF in Clearwater County and 125 MMBF
in Idaho County. From 1979 to 1990, the harvest in Clearwater County fell by
182 MMBF (56 percent) from private lands and 89 MMBF (66 percent) drop in the
National Forest harvest. Since 1990, Clearwater County’s harvest has declined by
84 percent on National Forest lands, by 48 percent on state lands, and by 4 percent
on industrial lands. In Idaho County, the harvest from National Forest lands fell
90 percent since 1990 and declined by 30 percent from other ownerships during
that time.

Southern Idaho’s most dramatic harvest decreases occurred in the southwest-
ern counties of Adams, Boise, and Valley, where timber harvest has decreased by
146 MMBF (33 percent) since 1990 (table 2). Virtually all of the decrease can be
attributed to sharply declining harvest levels from National Forest lands, which
declined by approximately 87 percent since 1990. The harvest from other owner-
ships has remained essentially unchanged over the same period.

6 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 Table 2--Idaho timber harvest (MMBF, Scribner) by county, selected years (sources: Keegan and others 1982, 1988, 1992, 1997; Morgan and others 2004; Brandt and others

2012). 1979 1985 1990 1995 2001 2006 2011

County MMBF Percent MMBF Percent MMBF Percent MMBF Percent MMBF Percent MMBF Percent MMBF Percent
Scribner of Total Scribner of Total Scribner of Total Scribner of Total Scribner of Total Scribner of Total Scribner of Total
Clearwater
Benewah 544 29.4 335 21.0 Northern Idaho 234 17.1 182 18.1 174 15.6 221 20.7
Shoshone 100 5.4 94 5.9 117 8.5 129 12.8 144 12.9 156 14.6
Latah 206 11.1 217 13.6 267 15.8 194 14.2 172 17.1 200 17.8 137 12.9
Bonner 57 3.1 89 5.6 152 9.0 96 7.0 70 7.0 125 11.2 130 12.2
Idaho 142 7.7 175 11.0 183 10.8 139 10.1 124 12.3 93 8.3 98 9.2
Kootenai 190 10.3 156 9.8 84 5.0 113 8.2 65 6.5 65 5.8 88 8.2
Boundary 65 3.5 80 5.0 197 11.6 114 8.3 81 8.0 100 8.9 70 6.6
Nez Perce 94 5.1 80 5.0 174 10.3 69 5.0 57 5.7 53 4.8 39 3.6
Lewis 0.4 12 0.8 152 9.0 0.6 10 0.9
Northern Idaho 8 0.2 13 0.8 86 5.1 8 1.2 4 0.4 12 1.1 8 0.8
4 76.2 1,254 78.7 17 1.0 17 80.3 14 1.4 976 87.1 6 0.6
Valley 1,410 20 1.2 1,100 899 89.3 953 89.4
Boise 5.8 88 5.5 1,332 78.7 4.9 65 5.8
Adams 107 4.5 67 4.2 67 6.8 39 3.9 25 2.2 48 4.5
Washington 84 2.8 66 4.1 Southern Idaho 93 2.0 20 2.0 30 2.7 28 2.6
Elmore 52 28 25 2.5 24 2.2
Other Counties 4 b 9 0.6 52 3.1 6 b -b cb 5 0.5
Southwestern Idaho 25 127 7.5 38 7 0.7
20 1.4 14 0.9 87 5.1 11 2.8 1b cb cb
292 1.1 3b 242 0.8 91 9.0
15.8 247 15.5 4b 17.7 6 0.5 cb
5b 126 11.3
6b 104 9.8
281 16.6

Fremont 76 4.1 43 2.7 20 1.2 2b 3b 1 0.1 3 0.3
6b 1b
Lemhi 34 1.8 11 0.7 16 0.9 -b 1b 1 0.1 cb
5b 5b
Clark 10 0.5 10 0.6 16 0.9 15 1.1 7 0.7 6 0.6 3 0.3
4b 3b 27 2.0 17 1.7
Caribou 24 1.3 10 0.6 24 1.4 4 0.3 cb
19 1.2 79 4.7 7 0.6
Other Counties 93 5.8 19 1.7 3 0.3
9 0.8
Southeastern Idaho 148 8.0

Southern Idaho 440 23.8 340 21.3 360 21.3 269 19.7 108 10.7 145 12.9 113 10.6

Idaho Total 1,850 100.0 1,594 100.0 1,692 100.0 1,370 100.0 1,007 100.0 1,121 100.0 1,066 100.0
aPercentage detail may not sum to 100% due to rounding.
bLess than 0.05 percent.
cLess than 1 MMBF.

7

Harvest by Ownership and Product Type

Total harvest in Idaho in 2011 was 1,066 million board feet (MMBF) Scribner
log scale, a decrease of approximately 5 percent (54 MMBF) from pre-recession
2006, and almost 43 percent higher than the 2009 low point (750 MMBF) dur-
ing the Great Recession. Private industrial timberlands held stable around 46 per-
cent (484 MMBF) of harvest. Timber harvested from non-industrial private forest
(NIPF) lands fell from 31 percent of the total harvest in 2006 to just 12 percent for
2011 (from 348 MMBF to 130 MMBF). Public lands contributed 42 percent of the
harvest in 2011 compared to 26 percent in 2006. Harvest from IDL lands increased
from 18.6 percent to 32.6 of total harvest volume for 2011, 140 MMBF over 2006
(from 208 MMBF to 348 MMBF). National Forest harvest (103 MMBF) increased
from 7 percent of total harvest in 2006 to 9.7 percent in 2011.The National Forest
harvest in 2011 represented a 36 percent increase over 2006 (76 MMBF) and a
29 percent increase over 2001 (80 MMBF) (table 3).

Historically, the majority of Idaho’s timber harvest has been processed into lum-
ber and plywood, and in 2011, about 89 percent of Idaho’s harvest was used to
produce these products. Private lands continue to be the primary source of raw
material for saw and veneer logs, providing 52 percent (549 MMBF) of the total
supply in 2011 (table 4). Private lands accounted for about 76 percent of the saw
and veneer logs in both 2006 and 2001. Prior to 1995, data showed private lands
providing less than half of Idaho’s saw and veneer log harvest (Keegan and others
1997; Morgan and others 2004).

Although substantial harvest declines from National Forests since the mid-
1990s have contributed to the increase in the portion of harvest from private lands,
2011 saw a small reversal. In 2011, the National Forest provided 8.5 percent
(90.5 MMBF) of Idaho’s saw and veneer log harvest compared to just 6 percent
(63 MMBF) and 7 percent (71 MMBF) in 2006 and 2001, respectively.

Idaho’s pulpwood harvest in 2011 was 74 MMBF, an increase of 45 percent over
2006 (51 MMBF). Pulpwood represented 6.9 percent of the 2011 harvest com-
pared to 4.5 percent in 2006. Strong pulpwood markets often occur when lumber
production and prices are down. This is because sawmill residue supplies shrink
and residue users, such as the pulp and paper industry, turn to chipped roundwood
for their fiber needs. The pulp and paper sector typically relies on private lands for
a large portion of their roundwood receipts. Private timberlands supplied 64 per-
cent of the pulpwood volume in 2011 versus 77 percent in 2006, and 80 percent in
2001. The difference in the private harvest of pulpwood among study years indi-
cates the strength of the pulp market during those years. National forests provided
10 percent of the 2011 pulpwood harvest and state lands provided 23 percent.

In 2011, the combined harvest for cedar products, house logs, posts, poles, rails,
utility poles, and other products totaled 47.5 MMBF. Previous mill censuses indi-
cated that the harvest for these products was 46 MMBF in 2006 and 43 MMBF
in 2001. Public timberlands provided 63.8 percent of the harvest for this group
of products in 2011. This is about the same as 2006 (63 percent) and higher than
2001 (52 percent). The total harvest of cedar products in 2011 (30.5 MMBF) in-
creased 35 percent from 2006 (22.6 MMBF) and was 3 percent higher than the
2001 harvest (29.5 MMBF). The total harvest for post, poles, utility poles, and

8 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Table 3-- Idaho timber harvest (MBF, Scribner) by ownership class, selected years (sources: Keegan and
others 1982, 1988, 1992, 1997; Morgan and others 2004; Brandt and others 2012).

Ownership class 1979 1985 1990 1995 2001 2006 2011

- - - - - - Thousand board feet, Scribner - - - - - -

Private 808,749 779,109 754,978 829,417 750,590 833,797 615,012

Industrial 455,721 467,474 364,178 467,518 443,029 485,590 484,176
Non-industrial privatea 353,028 311,635 390,800 361,899 307,561 348,207 130,836

Public 1,041,719 814,787 937,560 540,296 256,704 286,813 450,893

National Forest 866,455 631,003 700,715 301,277 77,863 78,613 102,937
Other publicb 175,264 183,784 236,845 239,019 178,841 208,200 347,956

All ownersb 1,850,468 1,593,896 1,692,538 1,369,713 1,007,294 1,120,610 1,065,905

- - - - - - - - - - - - Percent - - - - - - - - - - - -

Private 43.7 48.9 44.6 60.6 74.5 74.4 57.7

Industrial 24.6 29.3 21.5 34.1 44.0 43.3 45.4
Non-industrial privatea
19.1 19.6 23.1 26.4 30.5 31.1 12.3

Public 56.3 51.1 55.4 39.4 25.5 25.6 42.3

National Forest 46.8 39.6 41.4 22.0 7.7 7.0 9.7
Other publicb 32.6
9.5 11.5 14.0 17.5 17.8 18.6 100

All ownersb 100 100 100 100 100 100

a Non-industrial private includes Tribal harvest.

bOther public refers to state owned timberlands and Bureau of Land Management timberlands.

Table 4--Idaho timber harvest by ownership class and timber product 2011.

Ownership class Saw and House   Cedar Other All
veneer logsa logs products timber products
productsb

- - - - - - - - - - Thousand board feet, Scribner - - - - - - - - - - - - -

Private timberlands 549,247 127 11,039 54,599 615,012

Industrial 441,205 57 1,476 41,438 484,176
Non-industrial privatec 108,042 70 9,563 13,161 130,836

Public timberlands 394,989 283 19,461 36,161 450,893

National Forest 90,501 178 2,300 9,958 102,937

State 300,631 105 15,028 25,703 341,467

BLM 3,857 - 2,133 500 6,490

All owners 944,236 410 30,500 90,760 1,065,905

- - - - - - - - - - - - - Percent of harvest - - - - - - - - - - - - - - -

Private timberlands 51.5 0.01 1.0 5.1 57.7

Industrial 41.4 0.01 0.1 3.9 45.4

Non-industrial privatec 10.1 0.01 0.9 1.2 12.3

Public timberlands 37.1 0.03 1.8 3.4 42.3

National Forest 8.5 0.02 0.2 0.9 9.7

State 28.2 0.01 1.4 2.4 32.0

BLM 0.4 - 0.2 0.05 0.6

All owners 88.6 0.04 2.9 8.5 100

a Saw and veneer logs combined to prevent disclosure of firm level data.  
9
b Other timber products include logs used for pulpwood, posts and poles, utility poles,
furniture logs, and energywood logs.

c Non-industrial private includes Tribal harvest.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

rails decreased 8.6 percent from 19.4 MMBF in 2006 (adjusted to reflect additional
facilities) to 16.7 MMBF in 2011. Public land provided 63.8 percent of the harvest
for cedar products and 63.7 percent of the harvest for posts, poles, utility poles,
and rails. As a product of the Great Recession and the collapse of the construction
boom, harvesting for house logs plummeted from 14 MMBF in 2006 to just 410
MBF. In 2006, 88 percent of the houselog harvest came from National Forests. In
2011, 43 percent came from National Forests, 31 percent from private lands, and
26 percent from IDL.

Harvest by Species

True firs (Abies spp.)—grand fir (Abies grandis ) and subalpine fir (Abies lasio-
carpa (Hook.) Nutt.)—were the largest component (35 percent) of Idaho’s 2011
timber harvest, which was similar to 2006 (table 5). Douglas-fir (Pseudotsuga
menziesii (Mirb.) Franco) at 24 percent was the second largest component of the
2011 harvest. As in 2006, western redcedar (Thuja plicata Donn ex D. Donn) and
ponderosa pine (Pinus ponderosa Dougl. ex Laws.) rounded out the top four most
harvested species. These four species comprised 82 and 81 percent of the total
harvest in 2006 and 2011 respectively. The decline in the harvest of western white
pine (Pinus monticola Dougl. ex D. Don) has been the greatest change to occur in
the species composition of the timber harvest in Idaho during the last 30 years. In
1969, the white pine harvest was about 343 MMBF and accounted for 19 percent
of Idaho’s timber harvest; by 2001 the white pine timber harvest had dropped to
39 MMBF or 4 percent of the total harvest. In 2006 and again in 2011, the west-
ern white pine harvest in Idaho had declined further, making up just 1 percent of
Idaho’s timber harvest. This change is the result of several interacting factors but
by far the biggest blow to white pine was dealt by white pine blister rust, an exotic
disease introduced to the United States from Europe in the early 1900s. By the
1940s, blister rust had reached epidemic levels and caused great damage to the
white pine resource throughout the Inland Northwest (Fins and others 2001).

Table 5--Proportion of Idaho timber harvest by species, selected years (sources: Setzer 1970; Morgan and others
2004; Brandt and others 2012).

Species 1969 1979 1985 1990 1995 2001 2006 2011

- - - - - - - - - Percentage of harvest (MBF, Scribner)- - - - - - - - -

True firs 24 22 27 23 25 24 34 35
28 24
Douglas-fir 18 20 21 22 27 26 13 12
7 10
Western redcedar 7 11 10 11 9 10
4 7
Ponderosa pine 14 13 12 18 17 7 5 6
Western hemlock a 1 3 3 4 12 5 3

Western larch 6 6 6 6 6 10 2 2
1 1
Lodgepole pine 4 8 10 10 6 5
a 35322 1 N/A
Spruces
100 100
Western white pine 19 8 6 5 3 4
Other speciesa
All speciesb 8 9 1 N/A 2 N/A

100 100 100 100 100 100

aWestern hemlock and Englemann spruce were included in the other species group in 1969.

bPercentage detail may not sum to 100% due to rounding.

10 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Species Composition of Product Types

In 2011, all of Idaho’s species groups were used to produce lumber. Overall
harvest by species for 2011 closely matched what was found in 2006. As in 2006,
true firs were the species most harvested for saw and veneer logs, comprising
36  percent of the saw and veneer log harvest, while Douglas-fir accounted for
26 percent (table 6). Western redcedar and ponderosa pine represented 10 percent
and 11 percent of the saw and veneer log harvest in Idaho respectively.

Changes in the harvest for products other than saw and veneer logs can be at-
tributed to the influence of reduced demand for saw/veneer logs, house logs, and
strong pulpwood markets. The 2011 harvest for other timber products (90 MMBF)
including pulpwood, posts and poles, furniture log, and energy wood, was primar-
ily made up of true firs (44 percent), western hemlock (26 percent), western red-
cedar (15 percent), and Douglas-fir (8 percent). Posts and small poles accounted
for 3.6 percent (3.3 MMBF) for other products. The primary species harvested
for posts and small non-utility pole products were lodgepole pine (Pinus contorta
Dougl. Ex Loud.) (79 percent) and ponderosa pine (14 percent). The western red-
cedar harvested for other timber products was used entirely to make utility poles.
Harvest for cedar products was 30 MMBF in 2011, 30 percent higher than in 2006
(23 MMBF). In 2006, Engelmann spruce (Picea engelmannii Parry ex Engelm.),
and Douglas-fir accounted for 60 percent of the house log harvest, in 2011 they
were only 25 percent. Lodgepole pine and ponderosa pine comprised 59 percent of
the timber used for house logs during 2011.

Table 6--Idaho timber harvest by species and timber product, 2011.

Species Saw and veneer House logs Cedar productsb Other timber All products
logsa productsc
- - - - - - - - - - - - - - - - - - - - - - Thousand board feet, Scribner - - - - - - - - - - - - - - - - - - - - - - - - - - - -

True firs 338,437 35 - 39,869 378,341
Douglas-fir 244,200 37 - 7,711 251,947
Western redcedar 91,191 11 30,500 13,876 135,579
Ponderosa pine 105,775 54 - 1,026 106,854
Western hemlock 51,057 - - 23,562 74,619
Western larch 61,021 12 - 549 61,581
Lodgepole pine 188 - 3,390 32,164
Spruce 28,587 68 - 426 17,113
Western white pine 16,620 6 - 352
All species 7,349 410 30,500 90,760 7,707
1,065,905
944,236

- - - - - - - - - - - - - - - - - Percent of harvest by product - - - - - - - - - - - - - - - - - - - - - - - - - -

True firs 36 8 - 44 35

Douglas-fir 26 9-8 24

Western redcedar 10 3 100 15 13
Ponderosa pine 11 10
13 - 1

Western hemlock 5 - - 26 7

Western larch 6 3 - 1 6

Lodgepole pine 3 46 - 4 3

Spruce 2 16 - - 2

Western white pine 1 1 - - 1

All speciesd 100 100 100 100 100

a Saw and veneer logs combined to prevent disclosure of firm level data.

b Cedar products include logs used for cedar shakes, shingles and split rail fencing.

c Other timber products include logs used for pulpwood, posts and poles, utility poles firewood, furniture log, and energy wood.
d Percentage detail may not sum to 100% due to rounding.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 11

Movement of Timber Products

The concentration of production at fewer and larger wood products facilities and
shifting patterns of harvest have created manufacturing centers that draw timber
from large geographic areas. Thus, large volumes of timber move across county
and state boundary lines, because most Idaho counties with mills, especially in
southern Idaho, now have only one or two timber processing facilities. To avoid
disclosure of firm-level timber receipt information, timber movement is described
by three broad geographic regions: northern Idaho, southwestern Idaho, and south-
eastern Idaho.

Movement across state lines—In 2011, 9 percent (95 MMBF) of Idaho’s harvest
was shipped for processing outside of the state (table 7). Idaho’s primary wood
products manufacturers received 102 MMBF of timber that was harvested outside
of Idaho, making the state a net importer of nearly 7 MMBF of timber in 2011.
Previous reports indicated that Idaho had net log flow out of Idaho ranging from
7 to 39 MMBF (Brandt and others 2012). Idaho mills received over 16 MMBF
of timber from Canada in 2011, compared to 9 MMBF in 2006 and 28 MMBF
in 2001. In 2011, 59 percent (51 MMBF) of Idaho’s timber imports came from
Washington, 37 percent (32 MMBF) from Montana, and the balance came from
Wyoming, Utah, Oregon, and Canada.

Southern Idaho counties supplied 55 percent (52 MMBF) of Idaho’s log flow to
other states in 2011, with southwestern Idaho counties accounting for the majority
(44 MMBF) of that volume, and northern Idaho counties were the source of the
remaining 45 percent (43 MMBF) of log flow to other states.

Saw and veneer logs were the major component of timber harvest flowing into
and out of Idaho. In 2011, Idaho sawmills and plywood/veneer mills imported
92 MMBF of saw and veneer logs, while 82 MMBF of saw and veneer logs went
out of state. About 4 MMBF were imported for cedar products and 5 MMBF for
other products. Most of the volume for other products that went out of Idaho went
for pulp and paper products.

Movement within Idaho—More than 90 percent (970 MMBF) of Idaho’s 2011
timber harvest was processed within the state (table 8). Timber movement among
Idaho’s three regions is somewhat varied. In northern Idaho, 95 percent of timber
harvested was processed within the region of harvest, essentially the same as in
2006. However, in southeastern Idaho, only 16 percent was processed in the region

Table 7--Log flow into and out of Idaho, 2011.

Log flow into Log flow out Net imports

Timber products Idaho of Idaho (net exports)

- - - - - Thousand board feet, Scribner - - - - -

Saw and veneer logs 92,432 81,591 10,841

House logs 1,459 8 1,451

Cedar products 3,700 1,045 2,655
Other productsa
4,843 12,807 (7,964)

All products 102,433 95,451 6,982
aOther products include logs for pulpwood, posts and poles, log

furniture, and industrial fuelwood.

12 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 Table 8--Intra-state and inter-state timber flow of 2011 Idaho timber harvest. Inter-state timber flow
Intra-state timber flow

Delivered Delivered Delivered to Total delivered Total delivered to Total delivered Total Total
to county to adjacent non-adjacent
of harvest ID county to northern southwestern to southeastern delivered delivered out- Total
ID county
Region of harvest Idaho Idaho Idaho to Idaho of-State harvest
- - - - - - - - Thousand board feet, Scribner - - - - - - - -
Northern Idaho
Southwestern Idaho 305,382 460,533 143,756 906,894 2,759 18 909,671 43,639 953,310
Southeastern Idaho 13,144 31,754 59,270 44,329 103,599
Idaho total 14,373 35,095 24,163 13
987 356 1,513 7,483 8,996
Northern Idaho 319,512 492,642 170 37 - 1,476 970,454 95,451 1,065,905
Southwestern Idaho
Southeastern Idaho 32 48 158,299 942,026 26,922 1,506 95 5 89
Idaho Total 13 31 - - - - - - - - Percentage of total harvest by region - - - - - - - - 57 43 10
11 4 17 83 1
30 46 15 95 0 - 91 9 100

14 34 23 0

2 0 - 16

15 88 3 0

13

where it was harvested, a sharp decline from the 46 percent that remained in the re-
gion during 2006. In southwestern Idaho, the trend was the opposite, with 23 per-
cent of the 2011 harvest processed in the region compared to 20 percent in 2006.
Seventy percent of the timber harvested in 2011 was processed in a county other
than the county of harvest, quite similar to 73 percent in 2006 and 68 percent in
2001. These data suggest timber is traveling a greater distance to be processed than
historically, and reflect the loss of milling infrastructure in southern Idaho (fig. 3).

Northern Idaho: The 10 counties north of the Salmon River are the center of
Idaho’s timber harvesting and processing activities. The 2011 total harvest in these
counties was about 953 MMBF, or 89 percent of the state’s harvest. Ninety-five
percent (906 MMBF) of the timber harvested in northern Idaho was processed
in northern Idaho, while the remaining 5 percent (50 MMBF) was processed in
another region or state. Only 3 MMBF of timber harvest in northern Idaho was
processed south of the Salmon River. Thirty-two percent of timber harvested in
northern Idaho was processed in the county of harvest. Forty-eight percent was
processed in counties adjacent to (sharing a county line with) the county of harvest,
and 15 percent was processed in counties not adjacent to the county of harvest.

Southwestern Idaho: Just over 103 MMBF of timber, 10 percent of the state’s
total harvest was harvested in the 10 southwestern counties in 2011. Approximately
43 percent (44 MMBF) was processed outside the state. Of the 57 percent (59
MMBF) that was processed in Idaho, 24 MMBF were processed in southwestern
Idaho, and 35 MMBF of this harvest was processed in northern Idaho, with vir-
tually none of the harvest being processed in southeastern Idaho. Within south-
western Idaho, 13 percent (13 MMBF) of the timber was processed in the county
of harvest, while 87 percent (90 MMBF) was processed in other counties. About

70

Percent of receipts from county Percent of receipts from other county Percent of receipts from outside of Idaho

60

50

40

30

20

10

0 1990 1995 Year
  2001 2006 2011
1985

Figure 3—Movement of timber in Idaho select years.

14 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

32 MMBF was processed in counties adjacent to the county of harvest, and 14
MMBF were processed in counties not adjacent to the county of harvest.

Southeastern Idaho: Southeastern Idaho accounted for the smallest percentage
of volume harvested in Idaho in 2011, with only 9 MMBF (1 percent). Less than
a quarter of this volume (1.5 MMBF) was processed in Idaho; 7.5 MMBF were
processed outside the state. Of the 1.5 MMBF processed in Idaho, 97.5 percent
stayed in southeastern Idaho with the remaining 2.5 percent processed in northern
Idaho. Of the timber harvested in southeastern Idaho that remained in the state for
processing, 65 percent was processed in the county of harvest and 24 percent was
processed in counties adjacent to the county of harvest. The remaining 11 percent
was processed in counties not adjacent to the county of harvest.

End Uses of Idaho’s Timber

In this section, we trace the flow of Idaho’s timber harvest through the state’s
primary manufacturing sectors. Because timber, wood products, and mill residue
are displayed, volumes are presented in cubic feet rather than board feet Scribner.
These figures refer to Idaho’s timber harvest and include timber products shipped
to out-of-state mills; they do not include timber harvested in other states and pro-
cessed in Idaho. The following conversion factors were used to convert board foot
Scribner volume to cubic foot volume:

• 5.07 board feet Scribner per cubic foot for saw and veneer logs
• 5.23 board feet per cubic foot for house logs
• 3.58 board feet per cubic foot for cedar logs
• 1.56 board feet per cubic foot for post and poles
• 4.87 board feet per cubic foot for utility poles
• 1.99 board feet per cubic foot for log furniture
• 2.43 board feet per cubic foot for pulpwood and all other timber products

During 2011, Idaho’s timber harvest was approximately 230,728 thousand cu-
bic feet (MCF), exclusive of bark (fig. 4). Of this volume, 186,575 MCF went to
sawmills and plywood plants, 30,460 MCF to pulp, 8,761 MCF to cedar mills,
4,854 MCF to posts, poles, utility poles, and log furniture manufacturers, and 78
MCF to log home manufacturers.

Of the 186,575 MCF received by sawmills and plywood plants, 90,012 MCF
(48 percent) became finished lumber, other sawn products, or plywood and veneer
products, and 3,966 MCF were lost to shrinkage. The remaining 92,597 MCF of
wood fiber became mill residue. About 88,187 MCF of sawmill residues were
used as raw material by pulp mills and board plants; 4,397 MCF were sold or used
internally as hog fuel to generate energy. Only 13 MCF of sawmill and plywood
plant residues went unused in 2011.

Pulp and paper mills and other residue-using plants, both in Idaho and in other
states, received approximately 30,460 MCF of wood fiber from Idaho timberlands.
Saw and veneer mills supplied 88,187 MCF of mill residue to pulp and board
manufacturers, and other sectors supplied 1,093 MCF.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 15

Cedar mills received 8,761 MCF of timber, of which 5,388 MCF became cedar
products and 2,345 MCF were sold or used for energy/hog fuel. Post, pole, utility
pole, and log furniture manufacturers received 4,854 MCF and produced 4,335
MCF in products. Log home manufacturers received 78 MCF, of which 44 MCF
became house logs. Mills in this and the post/pole/furniture sector seldom supplied
residue for use in other sectors. Most of the residue from these facilities was used
as firewood, livestock bedding, and landscape/mulch products.

Total harvesta
230,728 MCF

Pulp, board and other Log home Post, poles, Utility Cedar products Sawmills, plywood,
residueb related manufacturers poles, Log furniture mills and veneer mills
facilities 4,854 MCF 186,575 MCF
facilities 30,460 MCF 78 MCF 8,761 MCF

Energy Energy Energy Energy
21 MCF 348 MCF 2,345 MCF 4,397 MCF

Residue utilizing
plants 88,187 MCF

Residue utilizing
plants 1,026 MCF

Residue Unutilized residue
utilizing plants 13 MCF

63 MCF

Residue utilizing Unutilized residue
plants 4 MCF 2 MCF

Unutilized
residue 108

MCF

Unutilized residue Shrinkage
9 MCF 3,966 MCF

Pulp, board and other House logs and Post, poles utility Cedar fencing, Lumber and other sawn
residue utilizing products log homes 44 poles and log shakes, and other products. Plywood and
119,740 MCF MCF products 5,388 MCF
furniture 4,335 MCF veneer 90,012 MCF

a Harvest volume does not include bark.
bOther residue related facilities include energy plants, energy
products, roundwood chipping, mulch, and animal bedding
operations.

Figure 4—Idaho’s timber harvest and flow, 2011.

16 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Structure of Idaho’s Forest Products Industry

Structure and Location

In 2011, timber-processing facilities operated in 27 of Idaho’s 44 counties,
while timber was harvested in 29 counties. Idaho’s 10 northern counties contain
the greatest concentration of the primary forest products industry (fig. 5), which
includes plants that manufacture:

• Lumber and other sawn products
• Veneer/plywood
• Posts, utility poles, small poles, stakes, and roundwood furniture
• House logs and log homes
• Cedar products—shakes, shingles and split rail fencing
• Other products including pulp and paper, particleboard, chips, decorative bark,

wood fuel pellets, and energy from biomass

The 2011 FIDACs mill census identified 88 active primary forest products plants
(table 9), 26 fewer than in 2006. Every sector experienced temporary or permanent
closures during the poor market conditions from 2007 to 2011. The log home sec-
tor was the hardest hit in the years between 2006 and 2011. Because there are only
two plywood/veneer facilities remaining in Idaho, mill level data for this sector
have been combined with the sawmill analysis to prevent disclosure. Several large
facilities have closed since the last study; these closures are addressed in more
detail in the individual sector discussions.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 17

Figure 5—Location of Idaho’s active primary forest products manufacturers, 2011.
18 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Table 9--Active Idaho primary wood products facilities by county and product during 2011 and other years (sources:
Keegan and others 1997; Morgan and others 2004; Brandt and others 2012).

County Lumber Veneer/plywood Post, poles, and Log Cedar Residue-related All products
log furniture homes products productsa

Ada 1 1 2 1 4
Adams 1 1 2 3
Bear Lake 1 2 1 1 3
Benewah 3 2 1 7
Blaine 1
Boise 2 1 1 3
Bonner 3 1 2 13
Boundary 2 6 21 1 7
Canyon 2
Caribou 1 21 2 1
Clearwater 2 1 1 4
Custer 1
Fremont 1 2 1 1
Gem 1 1 3 1
Idaho 3 1 7
Jefferson 22 2
Kootenai 2 11 18 8
Latah 2 21 6
Lewis 21 1
Lincoln 1 1
1 2
Madison 1 4
1 1
Nez Perce 27 2
1
Payette 1 1
1 1
Shoshone 1 88
1
Teton 17 16 8

Twin Falls

Valley

2011 Total

2006 Total b 38 3 21 26 8 18 114
2001 Total
1995 Total 35 4 22 21 10 17 109
1990 Total 62 6 32 32 15 15 162
1985 Total 80 6 27 22 26 11 172
1979 Total 90 7 26 20 25 6 174
133 8 35 15 44 7 242

aResidue-related products include particleboard, chips, pulp and paper products, bioenergy products, and decorative bark.

b2006 numbers have been adjusted to reflect facilities active but not previously reported.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 19

Sales Value of Primary Wood Products

The periodic wood products industry censuses for Idaho have been produced
since 1979 and provide the most complete estimates of sales values for Idaho’s
primary forest products industry. Various other sources were used to estimate sales
values for the non-census years between 1977 and 2013 (Random Lengths 1976-
2013; WWPA 1964-2013). All sales are reported free on board (f.o.b.) the produc-
ing mill. Sales by Idaho’s primary forest products industry totaled $1.4 billion in
2011, an inflation-adjusted decrease of nearly $430 million (23 percent) from 2006
(table 10). Updated estimates indicate sales have increased since 2011 by $300
million (20 percent) in 2011 dollars (Morgan and others 2014).

About 93 percent of primary wood products sales are concentrated in three
sectors of the industry: sawmills, structural panels (plywood and veneer), and
residue-related products. Residue-related products include particleboard, chips,
pulp and paper products, bioenergy products, decorative bark, and mill residues.
Sales values for residue-related products also include mill residues sold to users
within Idaho as well as outside the state.

Sales values for lumber from Idaho sawmills peaked in 1978 at nearly $1.5 bil-
lion (in 2011 dollars) (fig. 6) and sales of all primary products totaled $2.4 billion
in 1978. Since 1999 sales have declined steadily, primarily due to lower per-unit
prices as well as curtailments and closures. The lumber sales value of nearly $855
million in 2001 was the lowest since 1985 ($806 million). To prevent disclosure of
firm level information, sales data for lumber and other sawn products were com-
bined with plywood and veneer sales in 2006. For 2006, sales of these products
totaled almost $865 million dollars. Since 2006 the Great Recession has reduced
the sales value of lumber and plywood/veneer by 41 percent from $865 to under
$513 million in 2011.

Total sales of all primary processors have been buoyed and stabilized to a de-
gree by the expansion of the residue-utilizing sector. This sector has shown sub-
stantial increases in sales over the past 25 years and has become an increasingly
important part of Idaho’s forest products industry. Inflation-adjusted sales were
about $692 million in 1979, versus nearly $790 million in 2011. Sales by residue
utilizing manufacturers accounted for about 56 percent of Idaho’s primary forest

Table 10--Sales value of Idaho's primary wood products, selected years (sources:Keegan and others 1982, 1988, 1992, 1997, Morgan
and others 2004, Brandt and others 2012).

Product 1979 1985 1990 1995 2001 2006 2011

- - - - - - - - - Million 2011 dollars - - - - - - - - - 864.8b 512.6b

Lumber, timbers, other sawn products 1,434.3 805.6 874.4 994.4 854.7 849.8 790.5
Residue-related productsa 691.8
243.1 727.8 897.8 959.7 1,010.0 b b
Plywood and veneer
152.4 169.3 239.5 86.9

House logs and log homes 22.2 6.2 16.4 29.1 31.7 42.0 8.0

Cedar products 37.3 15.2 22.7 19.5 37.8 37.1 52.9

Posts, poles, and log furnitiure 47.0 23.7 42.5 36.4 27.6 36.7 38.6

All products 2,475.8 1,730.9 2,023.2 2,278.6 2,048.7 1,830.4c 1,402.6

aResidue-related products include particleboard, chips, pulp and paper products, bioenergy products, decorative bark, and mill residues sold within
and outside the state.
bPlywood and veneer sales included with lumber to prevent disclosure of firm level data.
c2006 Sales value adjusted to reflect facilities not reported previously.

20 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

3,000 Other Products
2,500 Plywood
2,000 Residue Products
Lumber and plywood after
2005

Sales value (million 2011dollars) 1,500

1,000

500

0

YEAR

Figure 6—Sales value of Idaho’s primary forest products, 1977 through 2013 (sources: WWPA 1977 through 2013; Brandt and
others 2012; and Morgan and others 2014).

industry sales in 2011, versus 28 percent in the late 1970s. Part of the increase in
the proportion of residue sales is a function of recent weak markets for lumber.
As demand for lumber increases, with increased housing starts, lumber should
once again account for more than 40 percent of the of primary products sales.
Like other sectors of the industry in 2011, residue revenue decreased compared to
2006 with a 7 percent decline in sales value ($850 million to $790 million). Sales
by the remaining sectors of Idaho’s primary wood products industry totaled over
$99.5 million, the highest for any census year and a 4 percent increase over 2006.
Unlike the sales for other products that increased from 2006 levels, house log sales
dropped drastically.

Timber Received by Idaho Mills

Timber receipts refer to the volume of timber delivered to Idaho mills from
in-state and out-of-state sources. Timber receipts for Idaho mills differ from the
state’s timber harvest because some timber harvested in Idaho was processed in
other states, and some of the timber processed in Idaho was harvested outside the
state.
1977
1982
1987
1992
1997
2002
2007
2012

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 21

Idaho mills received close to 1,073 MMBF Scribner of timber for processing
during 2011, a 7 percent (77 MBF) decrease from 2006. Saw and veneer logs con-
stituted the vast majority (89 percent) of Idaho’s timber receipts, while logs used
for other timber products, including posts and poles, log furniture, pulpwood, and
industrial fuelwood, accounted for 8 percent of receipts in 2011. The remaining 3
percent of timber receipts consisted of logs used in cedar products and house logs
used by log home manufacturers.

Private lands supplied the majority of each timber product category, except house
logs and cedar products. National Forests were the leading supplier of timber to
Idaho log home manufacturers and IDL timberlands for cedar products (table 11).
Industrial lands were the leading supplier of saw and veneer logs (464 MMBF) and
provided the majority of volume (40 MMBF) for other products in 2011.

True firs were the leading species received by Idaho mills in 2011, accounting
for nearly 36 percent of receipts followed by Douglas-fir, which accounted for 24
percent of Idaho’s timber receipts (table 12). True firs accounted for the largest
proportion of sawlogs and veneer logs, as well as other products, while lodgepole
pine provided the largest proportion of house log receipts.

Table 11--Idaho timber receipts by ownership class and product, 2011. Cedar products Other productsb
Saw and veneer logsa
Ownership class House logs All products

- - - - - - - - - - - - - - - - - - - - - - Thousand board feet, Scribner - - - - - - - - - - - - - - - - - - - - - - - - -

Private 581,786 630 13,694 51,789 647,899

Industrial 463,623 489 906 40,929 505,947
Non-industrial privatec 118,163
141 12,788 10,860 141,952

Public 357,267 1,125 19,461 30,831 408,684

National Forest 77,766 944 2,300 8,706 89,716

State 278,668 181 15,028 21,625 315,502

BLM 833 - 2,133 500 3,466
Canadian and unspecifiedd 16,022 105 - 177 16,304

All owners 955,075 1,860 33,155 82,797 1,072,887
aSaw and veneer logs combined to prevent disclosure of firm level data.
bOther products include logs used for pulpwood, posts and poles, utility poles, cants, log furniture, and energywood logs.
c Non-industrial private includes Tribal harvest.
dIncludes timber receipts from Canada and unspecified out-of-state sources.

22 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Table 12--Idaho timber receipts by species and product, 2011.

Species Saw and veneer logsa House logs Cedar products Other productsb All products

- - - - - - - - - - - - - - - - - - - - - - Thousand board feet, Scribner - - - - - - - - - - - - - - - - - - - - - - - - -

True firs 347,108 118 - 35,703 382,929

Douglas-fir 252,543 246 - 5,673 258,463

Western redcedar 98,070 53.9 33,155 13,887 145,166

Ponderosa pine 80,324 62 - 1,380 81,767

Western hemlock 57,548 - - 21,550 79,098

Western larch 61,732 54 - 485 62,271

Lodgepole pine 28,220 703 - 3,633 32,556

Spruce 16,698 596 - 50 17,344

Western white pine 12,082 27 - 435 12,544
Other speciesb 750 - - - 750

All species 955,075 1,860 33,155 82,797 1,072,887

- - - - - - - - - - - - - - - - - - - - Percentage of receipts by product - - - - - - - - - - - - - - - - - - - - - - - - - -

True firs 36.3 6.36 - 43.1 35.7

Douglas-fir 26.4 13.24 - 6.9 24.1

Western redcedar 10.3 2.90 100 16.8 13.5

Ponderosa pine 8.4 3.35 - 1.7 7.6

Western hemlock 6.0 - - 26.0 7.4

Western larch 6.5 2.88 - 0.6 5.8

Lodgepole pine 3.0 37.82 - 4.4 3.0

Spruce 1.7 32.02 - 0.1 1.6

Western white pine 1.3 1.43 - 0.5 1.2
Other speciesc
0.1 - - - 0.1
All speciesd
100 100 100 100 100

aSaw and veneer logs combined to prevent disclosure of firm level data.
bOther products include logs used for pulpwood, posts and poles, log furniture, and industrial fuelwood.
cOther species include: red alder, and other unknown species

dPercentage detail may not sum to 100% due to rounding.

Sawmill and Plywood/Veneer Sector

Sawmills are the major component of Idaho’s primary forest products industry
in terms of sales value, number of facilities, and timber volume processed. In 2011,
Idaho’s 27 active sawmills processed the majority of the timber in the state and
produced 1.4 billion board feet of lumber and other sawn products. Idaho’s 2011
production represented 5.1 percent of the total U.S. production of softwood lumber
(4.9 percent in 2006) and about 3.9 percent of the nation’s softwood lumber con-
sumption (2.9 percent in 2006) (WWPA 1964-2013).

The most common species used by Idaho’s sawmill sector are Douglas-fir and
true firs, with smaller volumes of western hemlock, western larch, western redce-
dar, ponderosa pine, lodgepole pine, western white pine, and Engelmann spruce.
High quality select and shop grades of lumber are produced, as are small volumes
of structural timbers, but approximately 87 percent of production is dimension and
stud lumber used for construction.

Changes in lumber production—Milling timber into lumber has always been
an important part of Idaho’s forest products industry with the greatest growth in
lumber production occurring after the Second World War. By 1959 the volume of
lumber produced in Idaho had nearly doubled from about 1 billion board feet lum-
ber tally in 1947 to almost 1.8 billion (Setzer and Wilson 1970). Idaho’s lumber
production (fig. 7) clearly shows the influence of markets with a peak in the late
1970s of nearly 2 billion board feet. Lumber production fluctuated in response to
timber availability, demand for lumber, changes in mill technology, and use of
timber by other sectors over the next two decades and by the late 1990s was around

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 23

Lumber production (million board feet, lumber tally)2,500
1947
19522,000
1957
19621,500
1967
19721,000
1977
1982500
1987
19920
1997
2002YEAR
2007
2012Figure 7—Idaho lumber production, 1947 through 2013 (source: WWPA 1964 through 2013).

2 billion board feet. Between 1999 and 2005, lumber production averaged 1.9 bil-
lion board feet annually. In 2001 annual production totaling 1.8 billion board feet
was the lowest since 1996. In 2005, annual production of just over 2 billion board
feet was the highest since 1990.

Demand for dimensional lumber weakened in 2006 following the housing boom
that peaked in 2005 (fig 1). Lumber production in 2006 was 1.85 billion board
feet, and by 2009 had fallen 40 percent to just over 1.1 billion board feet, the low-
est since 1951. In 2011 lumber production, in response to improved economic
conditions, increased to 1.3 billion board feet and has continued to increase to an
estimated 1.6 billion board feet for 2013.

Many Idaho sawmills were negatively impacted by falling lumber prices as a
result of the downturn in housing. Since 2006 several older mills have closed and
two new sawmills were built. Both of the new facilities purchased used equipment
to construct their mills. By 2013, both of these mills were closed.

Sawmill lumber recovery and lumber overrun—Product recovery ratios, or
the volume of output per unit of input, are a measure of efficiency reported as
lumber recovery factors (LRF) and lumber overrun (LO). The LRF is the lumber
output in MBF lumber tally divided by the timber input in thousand cubic feet
(MCF). Lumber overrun is the amount of lumber actually recovered in excess of
the amount predicted by the log scale, expressed as a proportion of the log scale.
Although LO is the most commonly quoted measure of lumber recovery/efficien-
cy, LO is a less accurate portrayal of efficiency in lumber output per unit of timber
input primarily due to the Scribner log scale. The LRF better illustrates increased
lumber output as a function of improvements in technology and sawing techniques
(Keegan and others 2010).

24 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Both LO and LRF have shown substantial increases over the past 35 years as
shown in figure 8. Lumber overrun increased from 1.30 in 1979 to 1.89 in 2006
(Brandt and others 2012). Lumber recovery factors followed a similar pattern, in-
creasing from about 6.6 board feet lumber tally per cubic foot of sawlog input
in 1979 to 8.13 board feet in 2006. The increase in Idaho lumber recovery and
overrun since 1979 is due primarily to improved sawing technology with lumber
overrun also influenced by the characteristics of the Scribner log rule. The Scribner
log rule underestimates the volume of lumber that can be recovered from a log,
especially when milling small diameter trees, thus increasing calculated overrun
(Keegan and others 2012).

In 2011, Idaho sawmills recovered an average of 1.67 board feet lumber tally
per board foot Scribner of input, just under a 12 percent decrease from 2006. The
first decline in sawmill overrun in 40 years while LRF increased to 8.33. Decreases
in lumber overrun can occur when less small-diameter timber is used to manufac-
ture lumber and when markets are soft for lumber and strong for chips; smaller
trees are chipped instead of milled since sawmills frequently favor producing chips
instead of milling low grade lumber. In 2011, average quarterly conifer chip prices
were at a 3-year high (Random Lengths 2005-2013). The higher chip prices and
weak lumber markets likely led sawmills to chip more material rather than mill it
into lumber, thus driving LO down.

Lumber production by geographic area—Although lumber production increased
each study year from 1995 to 2006, the Great Recession had a dire impact on

10 4

8Lumber Recovery (BF1 Lumber Tally per CF2 Log Input) 7.74 8.13 8.33
6.66 Overrun (BF Lumber Tally per BF Scribner Log Input)7.52 7.411.89 3

6 6.66 1.86 2
1.34 1.36 1.67
1.56 1.53
4 1
Lumber recovery Overrun

2 1985 1990 1995 2001 2006 2011 0
1979 Year

1 Board Feet 2 Cubic Feet

Figure 8—Idaho sawmill lumber recovery and overrun 1979 through 2011 (source: Keegan and others 1997; Morgan and oth-
ers 2004; Brandt and others 2012).

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 25

Idaho’s timber industry. Lumber production in Idaho for 2006 was 1,805 MMBF
lumber tally, in 2011 it was 1,407 MMBF a 22 percent decrease but has rebounded
some to 1,494 MMBF in 2012 (WWPA 1964-2013) (table 13).

County-level lumber production data are withheld for some individual coun-
ties to avoid disclosure of firm-level information. Benewah, Bonner, Boundary,
Kootenai, and Shoshone counties were Idaho’s top lumber producing counties in
2011. This county group produced 769 MMBF, 55 percent of the total lumber
production in 2011, but was 63 percent of the total in 2006 (1,214 MMBF). The
remaining five counties in Northern Idaho provided 42 percent of Idaho’s lum-
ber production, bringing the contribution of Northern Idaho to 97 percent (1,363
MMBF) of total Idaho lumber production in 2011.

The lumber industry in southern Idaho continued the downward trend that be-
gan in the late 1980s with a number of sawmill closures. Production in southern
Idaho fell 25 percent from 2006 to 2011, and has declined by 88 percent since
1990. Production at mills in southern Idaho, which received more than 75 percent
of their timber from National Forests in 1990 and over 60 percent in 1995 (Keegan
and others 1992, 1997), were more vulnerable to sharp declines in National Forest
timber availability. Boise Cascade permanently closed its timber processing fa-
cilities during 2001, citing declines in Federal timber availability as the primary
reason for the closures (Boise Cascade 2001).

Number and size of sawmills—The number of sawmills operating in Idaho has
continued to decline over the last 50 years as production has become increasingly
concentrated into a smaller number of large mills. The average output per mill has
increased continually over time to a level tenfold of that in 1956. At 52 MMBF,
the average output per mill in 2011 (table 14) was the same as in 2006 and double
what it was in 1995 (27 MMBF). Idaho sawmills with a production capacity of
over 50 MMBF annually accounted for 86 percent of Idaho’s lumber production
in 2011 compared to 94 percent in 2006 and just 39 percent in 1995. At the height
of the post-World War II housing boom in the 1950s, there were more than 300,
mostly small, sawmills in Idaho (table 15). The 2011 mill census identified 27 saw-
mills, down from 38 in 2006. However, five additional facilities that operated in
2006 were identified, four mills were moved to different sectors based on changing
product outputs, and four facilities were inactive during 2011, bringing the number

Table 13--Idaho lumber production by geographic area, selected years (sources: Keegan and others

1997, Morgan and others 2004, Brandt and others 2012).

County group 1979 1985 1990 1995 2001 2006 2011

- - - - - - - - - - - - - - - - - - -MBF a , lumber tally - - - - - - - - - - - - - - - - - - - -

Bonner, Boundary,

Benewah, Kootenai,

Shoshone 930,446 848,930 1,181,555 1,022,002 1,224,991 1,213,987 769,229

Latah, Lewis,

Nez Perce,

Clearwater,Idaho 609,764 427,425 517,484 422,786 431,288 532,063 593,783

Northern Idaho 1,540,210 1,276,355 1,699,039 1,444,788 1,656,279 1,746,050 1,363,012

Southern Idaho 391,791 389,020 355,511 228,571 102,471 59,063 44,561
1,665,375 2,054,550 1,673,359 1,758,750 1,805,113 1,407,573
Idaho Total 1,932,001

aMBF = thousand board feet.

26 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Table 14--Number of active Idaho sawmills by production size class and average annual lumber
production, 2011.

Lumber production Number Percentage of Lumber Average production
per mill
size class of mills production production
MBF a
50+ MMBFb 9 86 MBF a
133,997
10 to 50 MMBF 5 13 1,205,972 37,981
189,905 2,519
1 to 10 MMBF 41 10,075
180
Less than 1 MMBF 9 0 1,621 52,132
1,407,573
Total 27 100
aProduction volume in thousand board feet (MBF) lumber tally.
b MMBF=million board feet lumber tally.

Table 15--Number of Idaho sawmills by annual lumber production, selected years (sources:

Setzer and Wilson 1970; Keegan and others 1982, 1988, 1992, 1997; Morgan and others 2004;
Brandt and others 2012).

Year Less than 10 10 to 50MMBF Over 50 MMBF Unknown Total number of
MMBF sawmills

1956 274 37 a - 311

1962 151 42 a - 193

1966 123 45 a - 168

1973 67 39 6 10 122

1979 88 31 14 - 133

1985 52 24 14 - 90

1990 40 22 18 - 80

1995 29 17 16 - 62

2001 12 9 14 - 35

2006 18 3 14 - 38

2011 13 5 9 - 27
aMills with lumber production in excess of 50 million board feet (MMBF) were included in the 10 to

50 MMBF category for these years.

of actual sawmill closures to just five. Of the five closures, two were large mills
(capacity of 50+ MMBF), and 3 were mid-sized mills (capacity of between 1 and
50 MMBF). Mid-sized mills have had the most attrition in the last two decades.
The loss of several large and medium sized processors prior to 2006 was the result
of declining harvest on National Forest lands (Brandt and others 2012). Closures
since 2006 have been primarily due to economic conditions created by the Great
Recession and U.S. home building collapse (Keegan and others 2012). The 2011
mill census identified 14 mills producing more than 10 MMBF annually, down
from 17 in 2006 and the fewest in the last 50 years.

As lumber production has become increasingly concentrated into larger facili-
ties, ownership of the facilities has also consolidated as a result of several merg-
ers of large forest products companies in Idaho. In 2008, Riley Creek Lumber
and Bennett Forest Industries merged to become Idaho Forest Group (IFG) fur-
ther consolidating the major sawmills in Idaho. Several mills changed names and
ownership between 2006 and 2012, mostly along the Clearwater River. The Three

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 27

Rivers Sawmill became Blue North, Tri Pro Forest Products purchased Konkoville
Lumber, and the Potlatch Sawmill in Lewiston went to Clearwater Paper and was
eventually sold to IFG. In St. Maries, Stimson Lumber Company purchased the
Regulus Stud mill. Even though mills have closed since 2006, an attitude of opti-
mism is reflected by the fact that several large facilities have made major capital
improvements in the last 3 years despite challenging market conditions and slow
recovery of U.S. housing starts (Morgan and others 2013 and 2014).

Plywood and Veneer mills—During the late 1950s and early 1960s, two plants
producing plywood and veneer operated in Idaho with combined total produc-
tion of less than 50 million square feet (MMSF) annually. By 1979, eight plants
producing structural panels or veneer were operating in Idaho producing between
500 and 600 MMSF annually. With the addition of an oriented strand board (OSB)
plant in 1984 the number of active plants in Idaho rose to six. Production peaked
in 1988 at 639 MMSF. The period from 1985 to 1995 was marked by stability in
both the number of plants operating and production levels. All six plants operating
in 1985 were still operating in 1995, and production remained stable at approxi-
mately 600 MMSF per year. In the late 1990s, the structural panel sector began a
period of significant decline. The OSB plant closed in 1997, and a plywood plant
closed in 2000, reducing the number of active structural panel plants operating in
Idaho to four. Another plywood plant closed in 2001. The closures since 1995 were
due primarily to reduced timber availability, as well as increased competition from
OSB and plywood producers elsewhere in North America and overseas. In 2011,
only two plywood/veneer facilities remained in Idaho.

The combined harvest of saw and veneer logs in 2011 was 944 MMBF Scribner,
8 percent lower than 2006, 32 percent lower than 1995, and 40 percent lower than
1990. Reduced competition for timber from the plywood/veneer sector, advance-
ments in sawmilling technology and fluctuating market conditions between 1990
and 2011 increased the proportion of the timber harvest utilized for lumber pro-
duction. These factors have been the primary influences that have sustained lum-
ber production in Idaho, while causing a substantial reduction of Idaho’s plywood
industry.

Residue-Related Products Sector

In addition to products such as lumber and plywood, the processing of timber
generates substantial volumes of wood fiber by-products. These by-products, re-
ferred to as mill residue, are the raw material source for the residue-related prod-
ucts sector. The 2011 mill census identified a total of 18 facilities in this sector. The
residue-related products sector includes a pulp and paperboard plant, a consumer
tissue products plant, a particleboard plant, three wood fuel pellet producers, five
facilities generating steam or electricity, two whole-log chipping facilities, and five
facilities producing bark-related products such as decorative landscaping material.

The total sales from the residue-related sector were nearly $790 million in 2011,
down 7 percent from 2006 ($849 million in constant 2011 dollars). This sector
remains a substantial part of Idaho’s forest products industry, accounting for ap-
proximately 56 percent of Idaho’s primary forest products sales in 2011, compared
to just 28 percent in 1979. The five facilities processing residues for landscape,

28 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

mulch and animal bedding products accounted for approximately 5 percent of the
sales value in this sector. Remaining sales came from pulp and paper, chipping
facilities, biomass plants, and heating products (pellets, compressed logs). In this
sector, Idaho has several one-of-a-kind facilities, thus plant level data have been
pooled to prevent disclosure of individual plant information.

Several Idaho firms operate plants producing energy from the burning of wood
residue. Most of these plants are associated with timber processing facilities and
historically produced steam energy for in-house use. Some of these plants began
to produce electricity for sale to outside markets in the early 1980s. The largest
biomass to energy plant in Idaho is located at the University of Idaho and supplies
the entire campus with steam heat by burning chipped logs and municipal wood
waste. One public school has a wood-fired heating system and participates in the
fuels for schools program while another burns commercial wood pellets.

Other Primary Manufacturers

In 2011, 41 (down from 55 in 2006) other primary manufacturers were identi-
fied that processed timber into cedar products, log homes, utility poles, posts, and
other small roundwood products such as corral poles, tree stakes, and round wood
log furniture (table 9). These facilities processed nearly 11 percent (117.8 MMBF)
of the timber received by Idaho facilities during 2011 and accounted for 7 percent
($99.5 million) of the primary industry’s total sales value, including mill residue
and residue related products.

Posts, poles, utility poles, and log furniture—In 2011, 17 plants in Idaho manu-
factured various types of roundwood products, such as utility poles, posts, corral
poles, and log furniture. A few log furniture and post/pole facilities have closed
since 2006, two sawmills were reclassified into this category because their product
mix changed, and two additional utility pole facilities were identified. Utility poles
accounted for 78 percent of roundwood inputs and 77 percent of the total sales
value in this category. By the end of 2012, McFarland Cascade‘s decades long as-
sociation with Idaho ended as Stella Jones purchased the company, consolidating
the entities operating in this sector. Over the last two decades, this portion of the
industry has shown a great deal of stability in its contribution to the wood products
economy of Idaho. With a little more than half the number of facilities of 1995,
2011 sales value was 17 percent higher than 1995 ($38.6 million versus $32.9 mil-
lion) and the highest for any study year since 1990 (table 10).

Cedar products—Eight cedar products facilities operated in Idaho during 2011,
the same as in 2006. Cedar product manufacturers processed 30 MMBF in 2011,
25 percent more than in 2006 (24 MMBF). Since 1979, the number of manufactur-
ers for cedar products such as cedar shakes, shingles, split rail fencing, and fence
lath in Idaho has steadily declined. Even so, the sales value of cedar products
reached an all-time high in 2011. At nearly $53 million (table 10), 2011’s sales
were 42 percent higher than 2006, and 171 percent higher than 1995. Much of this
growth was in cedar fencing products (split cedar posts, rails, and fencing boards).
In 2011, at a time of depressed lumber prices and sluggish housing starts, demand
for wood products used in repair (shakes) and enhancing the value of existing
housing (cedar fencing) likely contributed to the record sales volume and value.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 29

Idaho’s cedar products processors remain an important economic influence. With
only a fraction of the facilities that were operating in1979, sales values have risen
43 percent in constant dollars.

Log homes/house logs—The log home industry was impacted more severely than
any other primary sector. In recent years, log home sales have been primarily for
high end recreation properties and second homes, markets which were severely
impacted by the Great Recession (Morgan and others 2011.)

During 2011, there were 16 active log home facilities, ten fewer than in 2006.
Sales value (adjusted for inflation) fell from its 2006 high ($42 million) to just
$8 million, an 81 percent decrease, and the lowest since 1985 ($6.2 million).
Timber receipts for house logs fell from 17 MMBF in 2006 to 1.8 MMBF in 2011.
Production of house logs dropped from 3.2 million lineal feet to 547 thousand lin-
eal feet. Many of the facilities that have survived the effects of the Great Recession
have done so by producing other products such as posts, poles, timbers, and kits
for small log buildings. A few facilities switched from processing logs and build-
ing homes to selling and assembling pre-manufactured log homes or kits from
other companies. While the log home industry accounts for only a small fraction
of Idaho’s primary wood products industry, these facilities are labor intensive and
add a great deal of value to the log with relatively low capital investment. Since the
industry can expand rather easily due to the low capital investment, recovery will
likely depend on the recreation and second home markets, which will probably
improve at a slower rate than other construction markets.

Plant Capacity This section examines production capacity and estimates the timber-process-
ing capacity and the proportion of that capacity utilized by Idaho’s primary for-
30 est products manufacturers in 2011. The analysis focuses on plants processing
sawtimber—sawmills, plywood and veneer plants, house log plants, and utility
pole plants. Capacity and utilization for the non-sawtimber processing manufac-
turers are discussed in less detail.

Mills were asked to specify production capacity-volume of finished product
the facility is capable of producing both per eight-hour shift and annually given
sufficient supplies of raw materials and firm market demand for products. Most
of the larger mills estimated annual capacity based on two 8- or 10-hour shifts
daily for 220 to 260 operating days per year. A few facilities estimated annual
capacity at 24 hours per day for 220 to 250 days. Smaller mills reported annual
capacity at one shift per day for 250 operating days or less per year.

Sawtimber processors reported production capacity in a variety of units.
Sawmills reported production capacity in thousand board feet (MBF), lumber
tally, while plywood capacity was reported in thousand square feet (MSF) on
a 3/8-inch basis. Utility pole production capacity was reported in numbers of
pieces of a given size, and house log capacity in lineal feet. To combine the
production capacity figures from different sectors and estimate the industry’s
total capacity to process sawtimber, production capacity was converted to units

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

of timber input (MMBF Scribner) on a mill-by-mill basis, using each facility’s
product recovery factor.

Timber processing capacity for sawmills was calculated by dividing lumber
production capacity by each mill’s lumber recovery. Plywood and veneer capac-
ity figures were converted to MMBF Scribner by dividing production capacity
in square feet by each mill’s plywood recovery. Utility pole and house log ca-
pacities were adjusted to MMBF Scribner by multiplying capacity in the given
finished product unit by an average Scribner board foot volume per piece or per
lineal foot.

Estimates of mill capacities to process sawtimber and the utilization of total
capacity for 1979, 1985, 1990, 1995, 2001, and 2006 are based on complete for-
est products industry censuses of Idaho’s industry. For non-census years, mill
capacities and utilization were estimated using information from industry direc-
tories, trade associations, and industry consultants (Random Lengths 2001-2013;
WWPA 1964-2013; Keegan and others 2006; Spelter and others 2009; Ehinger
2012). Detailed capacity information is not available prior to the 1979 mill cen-
sus. Idaho’s sawtimber processing capacity has declined by 38 percent since
1979, with most of the decline occurring after 1990 (fig. 9). In 2003, several
mill closures reduced capacity to less than 1,150 MMBF. The 2006 study found
that capacity to process timber actually increased from 2001. Idaho’s Sawtimber
processing capacity in 2011 was 1,287 MMBF down 4 percent (55 MMBF) from
2006 (1,342).

Sawtimber Capacity and Utilization by Sector

Both capacity to process sawtimber and capacity utilization declined slightly in
2011 from 2006. Idaho mills processed 914 MMBF Scribner of saw timber, utiliz-
ing 71 percent of the state’s capacity, the lowest level of utilization for any mill
census year (table 16). Utilization peaked in 1990 at 90 percent then dropped to
less than 84 percent. Since 2011, a few large mills have made significant invest-
ments in upgrading milling technologies and two mills were permanently closed
and dismantled. Sawtimber processing capacity was estimated to have increased
from 1,287 to 1,555 MMBF by the end of 2013.

Idaho’s overall capacity and utilization trend closely with the state’s sawmill
and plywood/veneer industries, which accounted for 97 percent of sawtimber pro-
cessing capacity in 2011 and has been between 97 and 98 percent for each study
year except 1990 when it was 95 percent. The combined sawtimber capacity of
sawmills and plywood and veneer plants in 2011 was 1,256 MMBF, down from
1,304 MMBF in 2006 and 31 percent less than in 1979 (1,809 MMBF). Capacity
utilization for 2011 declined from 79 percent in 2006 to 72 percent.

In 2011, two utility pole plants that were operating but not captured in 2006
were added to the mill census. Adjustments in capacity and utilization were made
to the 2006 data. The annual timber processing capacity of Idaho’s utility pole and
house log sectors in 2011 was 31 MMBF, 19 percent (7 MMBF) lower than in
2006 (38 MMBF). In 2011, only 35 percent of the capacity was utilized compared
to 55 percent in 2006. This decrease can be attributed to the collapse of the log
home market in conjunction with the Great Recession.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 31

Table 16--Estimated capacity to process sawtimber and capacity utilized for sawmills, plywood/veneer

plants, utility pole and house log plants, in Idaho, selected years (sources: Keegan and others 1982, 1988,

1992, 1997; Morgan and others 2004; Brandt and others 2012).

Capacity to process Volume Percentage of total

Plant type sawtimber processed capacity utilized

- - - - - - - - MMBF a , Scribner - - - - - - - -

1979

Sawmills 1,809 1,437 79

Plywood/veneer plants 221 210 95

Utility pole and house log plants 33 20 61

Total 2,063 1,667 81

1985 1,666 1,229 74
Sawmills 265 208 78
Plywood/veneer plants 34 15 44
Utility pole and house log plants 1,965 1,452 74
Total

1990 1,459 1,316 90
Sawmills 227 214 94
Plywood/veneer plants 31 14 45
Utility pole and house log plants 1,771 1,544 90
Total
1,318 1,097 83
1995 202 184 91
Sawmills 41 20 49
Plywood/veneer plants 1,562 1,301 83
Utility pole and house log plants
Total 1,140 948 83
126 72 57
2001 28 16 57
Sawmills 1,294 1,036 80
Plywood/veneer plants
Utility pole and house log plants 1,304 1,024 79
Total
b b b
2006c
Sawmills and plywood/veneer plants 38 21 55
Plywood/veneer plants 1,342 1,045 78
Utility pole and house log plants
Total

2011

Sawmills and plywood/veneer plants 1,256 903 72

Plywood/veneer plants bb b

Utility pole and house log plants 31 10 33
71
Total 1,287 914
aMMBF = million board feet.

bPlywood and veneer figures included with lumber to prevent disclosure of firm level data.
c2006 numbers updated to reflect facilities not reported previously

32 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

2,500 Capacity
2,000 Processed

Million board feet, Scribner 1,500

1,000

500

0

Figure 9—Idaho sawtimber processing capacity and sawtimber processed, 1979 through 2013 (source: Keegan and others
1997; Morgan and others 2004; Brandt and others 2012).
1980
1985
1990
1995
2000
2005
2010

Markets for Primary Wood Products

This chapter examines the markets for Idaho’s primary forest products exclud-
ing mill residue and residue related products. Respondent mills summarized their
2011 shipments of finished wood products, providing information on volume, sales
value, and geographic destination (fig. 10). Mills usually distributed their products
through their own distribution channels or through independent wholesalers and
selling agents. Because of subsequent wholesaling transactions, the geographic
destination reported may not precisely reflect final delivery points of shipments.

All sales, including mill residue and residue related products totaled $1.4 billion
in 2011. Excluding mill residues and sales by the residue-utilizing sector, sales
from Idaho’s primary wood products industry totaled $612 million in 2011, down
36 percent from 2006, and 41 percent from 2001.

The major market areas for Idaho’s primary wood products remain the Rocky
Mountain, Far West, and the North Central states. Nearly 80 percent of Idaho’s
2011 primary wood product sales occurred in four market areas: the South, Far
West, Rocky Mountain, and North Central states (table 17). Between 2006 and
2011, inflation adjusted sales decreased to every region except the South and other
countries. Sales to the South increased by 13 percent from $71 million in 2006
to $80 million in 2011, while export sales to other countries increased 42 per-
cent from $12 million to $17 million for the same period, the highest since 1990.
Decreases in sales values for all of the other regions ranged from 29 to 53 percent,
with the largest decrease to in-state sales.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 33

Figure 10—Shipment destinations for Idaho’s primary wood products. Regions are Idaho (1), Far West (2), Rocky Mountain
(3), North-Central (4), South (5), and Northeast (6).

34 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 Table 17--Destination and value of Idaho's 2011 primary wood products salesa. All values in 2011 dollars.(sources: Keegan and others 1982, 1988, 1992, 1997;

Morgan and others 2004; Brandt and others 2012).

Product Idaho Rocky Far West North- Northeast South Other Unknown Total
Mountain Central countries
- - - - - - - - - Sales value in thousand 2011 dollars- - - - - - - - -

Lumber, timbers, other sawn products, plywood 42,413 121,217 85,688 153,883 42,313 56,397 10,723 - 512,634
and veneerb

Posts, poles, and log furniture 11,413 1,357 19,643 200 150 - 5,866 - 38,629

House logs and log homes 2,408 2,478 777 1,179 573 120 422 - 7,957

Cedar products 6,163 10,282 9,672 2,354 1,120 23,299 16 - 52,906

2011 All products total 62,397 135,334 115,780 157,616 44,156 79,816 17,027 - 612,126
2006 Total 130,785 960,227
2001 Total 147,914 260,002 201,453 221,563 63,680 70,843 11,901 - 1,038,491
1995 Total 254,682 1,318,864
1990 Total 150,021 238,145 249,916 204,378 105,173 76,950 16,016 - 1,125,490
1985 Total 105,671 1,003,156
1979 Total 190,409 291,472 235,546 291,892 125,385 107,184 12,705 - 1,783,866

Lumber, timbers, other sawn products, plywood 8 146,221 215,887 271,645 179,321 119,611 18,181 24,604 83.7
and veneerb
Posts, poles, and log furniture 30 180,501 142,002 210,515 132,803 123,379 2,414 105,870 6.3
House logs and log homes 30 1.3
Cedar products 12 362,891 160,847 452,283 183,583 186,616 17,873 229,364 8.6

- - - - - - - - Percentage of total sales value by product - - - - - - - -

24 17 30 8 11 2 -

4 51 1 c c 15 -

31 10 15 7 2 5 -

19 18 4 2 44 0 -

2011 All products total 10 22 19 26 7 13 3 - 100
1 - 100
2006 Total 14 27 21 23 7 7 0 100
2 0 100
2001 Total 14 23 24 20 10 7 1 2 100
2 11 100
1995 Total 19 22 18 22 10 8 0 13 100
1
1990 Total 13 13 19 24 16 11

1985 Total 11 18 14 21 13 12

1979 Total 11 20 9 25 10 10
aDoes not include mill residue sales or sales by the residue-utilizing sector.
bLumber, timbers, and other sawn products includes plywood and veneer sales value to prevent disclosure of firm level data.
cLess than .05 percent.

35

Market Areas by Finished Product Type

Sales of Idaho’s plywood, veneer, lumber, timbers, and other sawn products
totaled just under $513 million and accounted for 84 percent of all wood products
sales in 2011 (table 17). Sales values decreased from 2006 levels to all regions ex-
cept to other countries, which increased by 24 percent. Idaho was 8 percent of total
sales in 2011 and 13 percent of sales in 2006. Idaho, the Rocky Mountain States,
and the Far West combined were 49 percent of total sales in 2011, down from 62
percent in 2006. The North Central, Northeast, and the South were 49 percent of
2011 sales, up from 37 percent in 2006.

Cedar products (including cedar shakes, shingles, and split rail fencing) gener-
ated about $53 million and almost 9 percent of total sales in 2011. Sales increased
in all regions except the North Central, Northeast, and to other countries. Idaho
had 12 percent of the sales for cedar products in 2011 and 6 percent in 2006. The
Rocky Mountain States with Idaho and the Far West States accounted for 49 per-
cent of cedar sales, up from 30 percent in 2006. Sales to the South were almost the
same as in 2006 at 44 percent. The North Central States had the biggest change
since 2006 dropping from 20 percent to only 4 percent of total sales. Virtually no
cedar products were exported to other countries.

Post, poles, and log furniture accounted for nearly $39 million and 6 percent of
total sales during 2011. Sales in-state were 29 percent of this sectors sales in 2011
and 24 percent in 2006. Idaho, the Rocky Mountain States, and the Far West States
comprised 84 percent of total sales, about equal to 2006 (83 percent). Sales in 2011
for this sector to other countries were 15 percent, up 5 percent from 2006. The
North Central States fell from 6 percent of total sales in 2006 to 1 percent in 2011.

Log home and house log manufacturers generated only $8 million and just 1
percent of total sales in 2011. Sales in this sector dropped in every region with the
smallest decrease in sales to other countries. Sales in-state were 30 percent of total
sales in this sector, up from 24 percent in 2006. Idaho, the other Rocky Mountain
States, the Far West, and the North Central States, were still the major markets
for these products, comprising 86 percent of total sales in 2011 and 84 percent in
2006. Sales to the Northeast, South, and other countries were the remaining 14
percent increasing from 5 percent in 2006. The Rocky Mountain States had the
largest decrease in the percentage of sales, dropping from 46 percent in 2006 to 31
percent in 2011.

Mill Residue: Types, Quality, and Use

Wood fiber residue from primary wood products manufacturers (mill residue)
is the major source of raw material for Idaho’s pulp and paper and board industry,
and an important source of fuel for all major sectors of the wood products industry.
If not used, wood residue can create difficult and expensive disposal problems.
Sawmills and plywood plants consistently generate over 90 percent of the mill
residue produced by Idaho’s forest products industry.

36 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Sawmill and Veneer/Plywood Residue

Three general types of wood fiber residue are generated by Idaho’s sawmills
and plywood plants. The largest pieces are coarse or chippable residue consisting
of slabs, edgings, and trimmings from lumber manufacturing; log ends; pieces of
veneer not suitable for manufacturing plywood and plywood plant peeler cores
not sawn into lumber. Then there is fine residue consisting of planer shavings and
sawdust from sawmills, sander dust from plywood plants, and finally bark.

Respondents to the 2011 survey provided information on volume of residue
generated, sales value, and uses. Residue volumes were reported in bone-dry units
(BDU). A bone-dry unit equals 2,400 pounds of wood, oven-dry weight. In addi-
tion to residue quantity and disposition, statewide residue factors, which quantify
the number of bone dry units of residue generated per MBF of lumber produced,
were updated for Idaho sawmills based on the 2011 mill census (table 18).

Idaho sawmills and plywood plants generated an estimated 1,279 thousand
bone-dry units (MBDU) of manufacturing residue in 2011, 1,519 in 2006, and
1,751 MBDU in 2001 (table 19). The decrease in residue generated since 1990
resulted from a combination of decreasing volumes of timber being processed and
improving technology. With computer guided saws, thinner kerf saws, better plan-
ers, and better plywood lathes, technological improvements have led to lower resi-
due volumes per unit of mill output through time (Keegan and others 2012).

Table 18 --Idaho sawmill residue factors, selected years (source: Keegan and others 1982, 1988, 1992, 1997; Morgan

and others 2004; Brandt and others 2012).

Type of residue 1979 1985 1990 1995 2001 2006 2011

- - - - - - - - - BDU per MBF lumber tally a - - - - - - - - - -

Coarse 0.47 0.53 0.43 0.45 0.42 0.39 0.38

Sawdust 0.25 0.21 0.18 0.18 0.17 0.15 0.13

Planner shavings 0.22 0.20 0.15 0.15 0.13 0.09 0.08

Bark 0.30 0.19 0.18 0.18 0.20 0.20 0.23

Total 1.24 1.13 0.94 0.96 0.92 0.83 0.82

aBone-dry unit (BDU = 2,400 lb of oven-dry wood) of residue generated for every 1,000 board feet of lumber

manufactured.

Table 19 --Volume of wood residue generated by Idaho sawmills and plywood/veneer plants, 2011.

Residue Wood residue Percentage of type Percentage

type Used Unused Total Used Unused of total

- - - - - - - - - Bone-dry units a - - - - - - - - - - - - - - - - - - Percent of total - - - - - - - - -

Coarse 590,993 86 591,079 99.99 0.01 46
Fineb
330,026 48 330,074 99.99 0.01 26

Bark 357,954 199 358,153 99.94 0.06 28

Total 1,278,973 333 1,279,306 99.97 0.03 100

aBone-dry unit (BDU = 2,400 lb of oven-dry wood) of residue generated for every 1,000 board feet of

lumber manufactured.
bFine residue includes sawdust and planer shavings.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 37

The proportion of manufacturing residue that is utilized has increased steadily
since 1979, to the point that since 2001 virtually all (over 99 percent) of the residue
produced has been used. Largely because of pulp and paper industry expansion and
the opening of particleboard plants in the region, but also because of the increasing
use of wood residue as a fuel to dry lumber and veneer, to generate electricity, and
provide heat. In 1979, 89 percent of mill residue was used, increasing to 99 percent
by 1995, and nearly 100 percent since 2001 (table 20).

Coarse residue comprised the largest share of residues in 2011. Mills produced
591 MBDU, with nearly 100 percent utilized. Pulp and paper mills in Idaho and
other states received 572 MBDU, with 19 MBDU going to other uses, primarily
internal energy use. Less than 1 MBDU of coarse residue were unused in 2011.

Of the 330 MBDU of fine residue used, over 94 percent (312 MBDU) went to
pulp and paper mills or board plants for use as a raw material, 17 MBDU were
consumed as fuel, and a little over 1 MBDU went for other uses such as animal
bedding, mulch, and raw material for other products.

Use of bark has increased dramatically since 1979 when only 73 percent was
utilized. Nearly 100 percent of bark residue has been utilized since 2001. Of the
358 MBDU produced in 2011, 283 MBDU were consumed as fuel, 2 MBDU were
used for miscellaneous products including decorative bark, livestock bedding, and
mulch; less than 1 MBDU went unused. The amount of bark used as hog fuel de-
clined from 2006 to 2011 while bark used for other products increased. Some of
the change in bark utilization is due to bark previously being reported as hog fuel
when it was used for decorative bark. Today, bark is usually more valuable for
other products such as landscaping material than hog fuel.

38 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Table 20 --Production and disposition of residues by sawmills and plywood/veneer plants, various years (sources:

Keegan and others 1997, Morgan and others 2004, Brandt and others 2012).

Total Reconstituted

Type of Residue Utilized Products Hogfuel Other Uses Unused Total
- - - - - - - - - - - - - - - Thousand Bone Dry Units a - - - - - - - - - - - - - - -

Coarse

1979 987 957 10 20 21 1,008

1985 976 930 28 18 14 990

1990 1001 988 0 13 5 1,006

1995 885 872 3 10 1 886
2001c 806 773
2006 735 639 30 3 3 810
2011 591 572 b 735
86 10 b 591

18 1

Sawdust 399 197 164 38 58 457
1979 308 176
1985 365 175 115 17 22 330
1990 306 158
1995 237 80 167 23 13 378
2001
266 224 133 15 4 310
2006
212 206 148 9 - 237
2011 b 266
40 2
5 1 b 212

Planer Shavings 340 215 112 13 20 360
1979 288 128
1985 310 221 155 5 17 305
1990 250 130
1995 88 1 9 319
307 193
2001 113 7 8 258
161 125 b 307
2006 113 1 b 161
118 106
2011 34 2 b 118

12 b

Bark 473 - 429 44 174 647
1979 282 -
1985 395 - 263 19 73 355
1990 358 -
1995 344 51 19 414
401 -
2001 343 15 10 368
357 - b 401
2006 384 17 b 357
358 -
2011 333 24
283 75d b 358

Total

1979 2,199 1,369 715 115 273 2,472
1,234
1985 1,854 1,384 561 59 126 1,980
1,160
1990 2,071 599 88 46 2,117
1,046
1995 1,799 592 47 23 1,822
2001c 1,751 988
675 30 3 1,755
2006 1,519 884 493 38 b 1,519
318 77 b 1,279
2011 1,279

aBone dry unit = 2,400 lb of ovendry wood.
bLess than 1,000 bone dry units.
cnumbers do not sum to total due to rounding.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 39

Residues from Other Manufacturers

The manufacture of utility poles, house logs, cedar products, posts, small poles,
roundwood chips, and roundwood furniture generates several types of residue,
including bark, shavings and peelings, log ends, cull portions of logs, and slabs
from log home manufacturers. In 2011, about 94 MBDU of these residues were
produced, and just over 92 percent of this volume was used. Uses of these residues
include livestock bedding, garden mulch, firewood, or other fuel.

The Forest Products Industry and the Idaho Economy

This section discusses employment and worker earnings trends in Idaho’s pri-
mary and secondary forest products industry as well as the industry’s place in the
economy of Idaho and northern Idaho. This analysis focuses on 2011 and 2012,
the most recent years for which comprehensive state and county economic data are
available.

The primary forest products industry includes logging, processing logs into
lumber and other wood products, processing wood residues into outputs such
as paper or electricity, and private-sector timber management services. The sec-
ondary industry1, as defined in this report, includes the further processing of the
outputs from the primary industry manufacturers either from Idaho or elsewhere.
Portions of the secondary industry, such as truss and cut-stock manufacturers are
directly linked and highly integrated with Idaho’s primary industry. Other compo-
nents such as mobile home manufacturers have limited links to and dependence on
Idaho’s primary industry.

Data from several sources were used to identify employment and workers earn-
ings for Idaho’s primary and secondary forest products industry. Sources includ-
ed the U.S. Department of Commerce, Regional Economic Information System
(REIS; U.S. Department of Commerce 2012), along with wage and salary data
from the U.S. Department of Labor, Bureau of Labor Statistics (U.S. Department
of Labor 2013), and the U.S. Census Bureau’s County Business Patterns (U.S.
Census Bureau 2013). Additional information from the Idaho Department of Labor
and from the periodic facilities censuses of the industry done by the Bureau of
Business and Economic Research as part of the FIDACS system (Keegan and oth-
ers 1982, 1988, 1992, 1997; Morgan and others 2004; Brandt and others 2012).

Most of the primary and secondary industry is reported in four North American
Industrial Classification (NAICS) sectors, as defined by the U.S. Office of
Management and Budget (OMB 1998):

• 113—forestry and logging;
• 1153—support activities for forestry;
• 321—wood products manufacturing;
• 322—paper manufacturing.

1 Secondary industries include but are not limited to; wood treatment plants, cabinet shops, molding, doors and window manufacturers, re-
manufacturers, and pallet manufacturers.

40 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

These classifications were used to estimate total employment and workers’
earnings (workers earnings) in Idaho’s forest products industry. This grouping of
industry categories provides a conservative measure of the forest products or wood
and paper products industry. However, a number of activities are not included in
these classifications, including the hauling of logs by independent truckers; haul-
ing of finished products by truck, rail or barge; and forest management activities
by government employees. Additionally, a portion of the secondary industry—the
manufacturing of wood furniture—is found in NAICS 337.

Based on these classifications, approximately 10,041 workers, earning over
$535 million (in 2011 dollars), were employed in the forest products industry in
Idaho in 2011. The primary sectors accounted for approximately 6,440 workers,
while the secondary sectors employed the remaining 3,600.

Trends in Forest Products Employment and Workers Earnings

This section focuses on trends in Idaho forest industry employment since 1990;
a discussion of longer term trends is in Morgan and others (2004), and Brandt and
others (2012).

The wood and paper products industry is a substantial and relatively high pay-
ing industry in Idaho. Even with the severe economic conditions of the last several
years, Idaho’s industry directly employed nearly 10,320 workers in 2012, an in-
crease of 279 jobs from 2011. The operations of the industry and the multiplier ef-
fect of workers’ spending and re-spending support jobs in other sectors of Idaho’s
economy (Cook and O’Laughlin, 2006). Of every 10 jobs in the forest products in-
dustry, spending supports seven jobs in other industries (Morgan and others 2014).
In addition to generating considerable employment in other sectors, wood and pa-
per employees earned an average of $52,000 in workers earnings/labor income for
2012; this is substantially more than the state average of $36,900 per worker.

Since 1990, the number of workers in Idaho’s forest products industry peaked
at around 19,000 in 1994. By 2001, economic challenges associated with the
September 11th terrorist attacks, declining timber harvest volume, and the closure
of four large sawmills (Ehinger 2012) had caused employment to fall to 14,200
(figure 11). From 2002 to 2007, employment fluctuated between 14,000 and
14,500. The economic collapse associated with the Great Recession precipitated
the next large drop when employment fell from 14,300 in 2007 to 9,600 in 2010.
Employment has risen with the slow economic recovery since 2010, with 2013
employment estimated at 10,500.

Idaho’s primary and secondary industries reveal substantially different trends in
employment. Primary employment dropped from 15,122 in 1990 to just 9,300 in
2006 and to 6,440 in 2011. The major factors leading to the long-term decline in
the industry, especially primary industry employment, was the nearly 35 percent
decline in timber harvest between 1990 and 2006 driven by an 80 percent decline
in the Federal timber sale program in Idaho. The collapse of the U.S housing mar-
ket impacted Idaho’s primary industry beginning in 2006 and contributed greatly
to drops in 2007 and 2008. Since the depth of the Great Recession in 2009, timber
harvests volume, lumber production, and employment have steadily but slowly
increased (fig. 12).

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 41

20,000Forest Industry Employment (employees)

18,000

16,000

14,000

12,000

10,000

8,000

6,000

4,000

2,000

0
1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
YEAR

Figure 11—Idaho forest industry employment, 1990 through 2012 (source: U.S Department of Commerce, Bureau of
Economic Analysis).

Employment
2.40 24,000

Billion board feet Scribmer/Lumber Tally 2.00 20,000

1.60 16,000

1.20 12,000

Timber Harvest 8,000
0.80

Lumber Produced

Number of workers

0.40 4,000
1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012

Figure 12—Idaho timber harvest, lumber production and industry employment, 1990-2012 (source: Morgan and others 2013).

42 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

Both the primary and secondary industry benefited when generally strong eco-
nomic performance globally, nationally, regionally, and in Idaho yielded strong
demand for wood products through much of the 1990s and in 2004 and 2005.
However, the secondary industry did not suffer from the sharply constricted raw
material supply that plagued the primary industry. Most of the secondary industry
uses wood products manufactured by the region’s primary industry, but it only
consumes a fraction of what the regional primary industry produces. Additionally,
the secondary industry can more easily acquire raw materials from elsewhere. It is,
therefore, not as susceptible to local timber availability as is the primary industry.

The increase in employment per unit volume of timber harvested in Idaho’s
primary industry, which occurred in the 1990s, did not continue into the 2000s.
Primary employment dropped by one-third between 2000 and the high market year
of 2005, while harvest volumes in Idaho declined by 6 percent over that period.
Much weaker markets led to further declines in employment from 2006 to 2008,
with primary employment falling to under 9,000 in 2008. The secondary industry
continued to increase employment after 2000 to approximately 6,000 workers in
2006 and 2007. With much poorer economic conditions in 2008, secondary em-
ployment declined to an estimated 5,400 workers.

Workers earnings is the compensation that is a return-to-work effort, including
labor earnings, employer-provided benefits, taxes paid to the government on be-
half of employees, and the portion of entrepreneurial income which is a return to
labor (US DOC BEA 2013). All earnings values for this section have been adjusted
to 2011 constant dollars. Similar to employment, workers earnings increased in
the 1990s from $917 million to $1.0 billion in 1999 and with the accelerated loss
of primary forest industry workers, workers earnings have declined steadily since
1999, dropping dramatically in 2008 and 2009 in response to the Great Recession
and U.S. housing collapse (figure 13). Total workers earnings bottomed out in
2009 at $485 million and recovered to over $537 million in 2012, but still lag the
pre-recession level of $744 million in 2006. The annual earnings per worker in
the industry has been fairly stable over the last 25 years, averaging $54,028 with
the lowest year in 1991 at $47,011 and the highest year in 1999 at $59,873. At
$53,090, 2011 individual earnings were 98 percent of the 25-year average.

The forest products industry is substantially more important in the ten Idaho
counties north of the Salmon River (Benewah, Bonner, Boundary, Clearwater,
Idaho, Kootenai, Latah, Lewis, Nez Perce, and Shoshone counties) than in the
state as a whole. Measured by labor income, less than 20 percent of the state’s
economic activity is in northern Idaho; however, $420 million out of $743 million
in forest industry labor income (57 percent) is in these northern Idaho counties.
Furthermore, virtually all of the wood and paper industry in northern Idaho is part
of the primary forest products industry and directly engaged in managing forests,
harvesting timber, and processing timber products. Northern Idaho accounted for
nearly 90 percent of the harvest, received 95 percent of the harvest for processing,
and accounted for almost 97percent of the lumber production in 2011. For each
of the 953 MMBF harvested in northern Idaho the industry provided 18 jobs (10
forest product industry + 8 in support), $629 thousand in labor income, and $2.9
million in sales of goods and services (Morgan and others 2013).

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 43

Workers earnings (millions of 2011 dollars)1,200

1,000

800

600

400

200
1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
YEAR

Figure 13—Idaho’s forest industry adjusted labor income, 1990 through 2012 (source: U.S Department of Commerce, Bureau
of Economic Analysis).

Idaho’s Forest Industry Outlook 2014
Wood products markets in 2014 and 2015 are generally expected to improve, as

new home construction is expected to approach 1.1 million units in 2014 and 1.4
million in 2015. Coupled with considerable unutilized capacity to produce lumber
in North America and strong but erratic export markets, wood products prices are
expected to increase but remain volatile. Continued economic recovery, increased
housing starts, and rising product prices should benefit Idaho’s forest industry,
further stimulating production, sales, and employment for the state’s mills and
loggers. Many Idaho mills still have unutilized processing capacity, and could be
positioned to increase output as markets and other factors improve.

Factors constraining industry growth potential include the overall economy, the
housing market, a viable logging and hauling work force, and timber availability.
There is a strong sentiment in the industry that logging capacity is at critical lev-
els and the logging and hauling contract force is in danger of collapse altogether
(Keough 2014). Additionally, with almost three-fourths of the timberlands in the
state under Federal ownership, availability of timber is a challenge to Idaho’s forest

44 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014

References industry. Without a reliable and affordable supply of timber, mills have difficulty
responding to increasing demand for wood products. Finding solutions to raw ma-
terial availability and the log supply issue for primary wood products processors in
the next few years is key for the continued success of the forest industry in Idaho.

Boise Cascade. 2001. Boise Cascade announces closure of plywood, lumber operations in
Idaho. Online: http://www.prnewswire.com/news-releases/boise-cascade-announces-
closure-of-plywood-lumber-operations-in-idaho-71333532.html. Last accessed Jul. 18,
2014.

Brandt, J. P.; Morgan, T. A.; Keegan, C. E., III.; Songster, J.M.; Spoelma, T.P. and
DeBlander, L.T. 2012. Idaho’s forest products industry and timber harvest, 2006.
Resour. Bull. RMRS-RB-12. Fort Collins, CO: U.S. Department of Agriculture, Forest
Service, Rocky Mountain Research Station. 45 p.

Cook, P.S.; O’Laughlin, J. 2006. Idaho’s forest products business sector: contributions,
challenges, and opportunities. Report No. 26. Moscow: University of Idaho, College of
Natural Resources, Policy Analysis Group. 48 p.

Ehinger, P.F. 2012. Forest industry data; Oregon, Washington, California, Idaho, Montana;
operating mills and closed mill history, Revised July 2012. Eugene, OR: Paul F. Ehinger
& Associates.

Fins, L.; Byler, J.; Ferguson, D.; Harvey, A.; Mahalovich M.; McDonald, G.; Miller, D.;
Schwandt J.; Zack, A. 2001. Return of the giants: restoring white pine ecosystems by
breeding and aggressive planting of blister rust-resistant white pines. Station Bull. 72.
Moscow, ID: University of Idaho, College of Natural Resources. 20 p.

Godfrey, E.B.; Schuster, E.G.; Bell, E.F. 1980. Idaho’s forest products industry, 1973.
Gen. Tech. Rep. INT-80. Ogden, UT: U.S. Department of Agriculture, Forest Service,
Intermountain Forest and Range Experiment Station. 42 p.

Keegan, C.E.; Morgan, T.A.; Blatner, K.A.; Daniels, J.M. 2010. Trends in lumber process-
ing in the Western United States. Part II: Overrun and lumber recovery factors. Forest
Products Journal. 60(2):140-143.

Keegan, C.E.; Sorenson, C.B.; Morgan, T.A.; Hayes, S.W.; Daniels, J.M. 2012. Impact of
the great recession and housing collapse on the forest products industry in the Western
United States. Forest Products Journal. 61(8): 625-634.

Keegan, C.E., III; Jackson, T.P.; Johnson, M.C. 1982. Idaho’s forest products industry:
a descriptive analysis 1979. Missoula, MT: The University of Montana, Bureau of
Business and Economic Research. 98 p.

Keegan, C.E., III; Martin, K.J.; Johnson, M.C.; Van Hooser, D.D. 1988. Idaho’s forest prod-
ucts industry: a descriptive analysis 1985. Missoula, MT: The University of Montana,
Bureau of Business and Economic Research. 90 p.

Keegan, C.E., III; Morgan, T.M.; Gebert, K.M.; Brandt, J.P.; Blatner, K.A.; Spoelma, T.P.
2006. Timber-processing capacity and capabilities in the Western United States. Journal
of Forestry. 104(5): 262-268.

Keegan, C.E., III; Wichman, D.P.; Van Hooser, D.D.; Gorman, T.M.; McClintick, M.W.;
Polzin, P.E. 1992. Idaho’s forest products industry: a descriptive analysis 1990. Missoula,
MT: The University of Montana, Bureau of Business and Economic Research.

Keegan, C.E., III; Wichman, D.P.; Van Hooser, D.D.; Gorman, T.M.; Wagner, F.G.; Polzin,
P.E.; Hearst, A.L. 1997. Idaho’s forest products industry: a descriptive analysis 1996.
Missoula, MT: The University of Montana, Bureau of Business and Economic Research.

USDA Forest Service Resour. Bull. RMRS-RB-19. 2014 45

Keough, S. A. 2014. Personal communication. Executive Director, Associated logging
contractors, Inc., P.O. Box 671, Coeur d’Alene, ID 83816.

Morgan, T.A.; Hayes, S.W.; Keegan, C.E., III; O’Laughlin, J.; Taylor, R.G.; Watson, P.;
Gorman, T.M.; Shook, S.R. 2013. Idaho’s forest products industry: current conditions
and forecast 2013. Station Bulletin 100. Moscow: University of Idaho. .

Morgan, T.A.; Keegan C.E. III; Spoelma, T.P.; Dillon, T.; DeBlander L. 2004. Idaho’s for-
est products industry: A descriptive analysis. Resour. Bull. RMRS-RB-4. Fort Collins,
CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station.
31 p.

Morgan, T.A.; McIver, C.P.; Sorenson, C.B.; Keegan, C.E. III; Hayes, S.W. 2011. Montana’s
forest economy-a roller coaster ride through the first decade of the 21st century. Montana
Business Quarterly. 49(4).

Morgan, T.A.; O’Laughlin, J.; Hayes, S.W.; Keegan, C.E., III; Taylor, R.G. 2014. Idaho’s
forest products industry: current conditions and forecast 2014. Station Bulletin 101.
Moscow: University of Idaho.

National Bureau of Economic Research (NBER). 2010. US business cycle expansions and
contractions. Online: http://www.nber.org/cycles.html. [Accessed February 2012].

Office of Management and Budget [OMB]. 1998. North American industrial classification
system. Lanham, MD: Executive Office of the President. 1247 p.

Random Lengths. 1976-2013. Random Lengths yearbook: forest product market prices and
statistics. Eugene, OR: Random Lengths.

Random Lengths. 2001-2013. Big Book: the buyers and sellers directory of the forest prod-
ucts industry. Eugene, OR: Random Lengths.

Random Lengths. 2005-2013. Random Lengths Yardstick: The monthly measure of the
forest products statistics. Eugene, OR: Random Lengths.

Setzer, T.S.; Wilson, A.K. 1970. Timber products in the Rocky Mountain States, 1966.
Resour. Bull. INT-9. Ogden, UT: U.S. Department of Agriculture, Forest Service,
Intermountain Forest and Range Experiment Station. 89 p.

Spelter, H.; McKeever, D.; Toth, D. 2009. Profile 2009: softwood sawmills in the
United States and Canada. Res. Pap. FPL-RP-659. Madison, WI: U.S. Department of
Agriculture, Forest Service, Forest Products Laboratory. 73 p.

U.S. Census Bureau. 2013. County business patterns. Online: http://www.census.gov/
econ/cbp/index.html. [Accessed December 2013].

U.S. Census Bureau. 2013. New residential construction (building permits, housing starts,
housing completions). Online: http://www.census.gov/const/www/newresconstindex.
html. [Accessed December 2013].

U.S. Forest Service (USFS). 2011. Forest Inventory Data Online (FIDO) [Database]. FIDO
version 1.5.1.05. Washington, DC:U.S. Department of Agriculture, Forest Service.
Online: http://apps.fs.fed.us/fido/standardrpt.html. [Accessed 07 April 2014].

U.S. Department of Commerce, Bureau of Economic Analysis. 2013. Regional accounts
data. www.bea.gov/bea /regional/spi. [Accessed December 2013].

U.S. Department of Commerce, Bureau of Economic Analysis. 2013. REIS table on line
http://www.bea.gov/iTable/iTable.cfm?reqid=70&step=1&isuri=1&acrdn=4#reqid=70
&step=1&isuri=1. [Accessed December 2013].

U.S. Department of Labor. 2013. Bureau of Labor Statistics. Online: http://www.bls.gov/.
[Accessed December 2013].

Woodall, C.W.; Ince, P.J.; Skog, K.E.; Aguilar, F.X.; Keegan, C.E.; Sorenson, C.B.;
Hodges, D.G.; Smith, W.B. 2012. An overview of the forest products sector downturn
in the United States. Forest Products Journal. 61(8): 595-603.

Western Wood Products Association [WWPA]. 1964-2013. Statistical yearbook of the
Western lumber industry. Portland, OR: Western Wood Products Association.

46 USDA Forest Service Resour. Bull. RMRS-RB-19. 2014


Click to View FlipBook Version